Operation Manual.

Transcription

1 Operation Manual

2 CONTENT Important Safety Instructions SPECIFICATIONS PACKAGE CONTENTS PART NAMES SET UP & INSTALLATION HOW TO PLAY GAME OPTION MAINTENANCE, INSPECTION OVERALL CONSTRUCTION

3 Thank you for purchasing DINO POP from UNIVERSAL SPACE. We hope you enjoy the product. This manual contains valuable information about how to operate and maintain your game machine properly and safely. It is intended for the owner and/or personnel in charge of product operation. Carefully read and understand the instructions. If you need any help during installation and setup please utilize this manual and troubleshooting guide. If the product fails to function properly, non-technical personnel should under no circumstance attempt to service the machine. Contact your distributor or manufacturer for help. Before use, please read IMPORTANT SAFETY INSTRUCTIONS. IMPORTANT SAFETY INSTRUCTIONS To ensure the safe usage of this product, carefully read and understand these instructions before operating your game. Save these instructions for future reference. Use this product only as described in this manual. Other uses not recommended may cause fire, electric shock or personal injury. Unplug the game from the outlet when not in use, when moving from one location to another, and before cleaning/servicing. Explanations which require special attention are indicated by signs of warning. Depending on the potential hazardous degree, the terms: NOTE, NOTICE, and WARNING are used. NOTE: A NOTE indicates useful hints or information about product usage. NOTICE: A NOTICE indicates potential damage to product and how to avoid the problem. WARNING: A WARNING indicates a potential for product damage or serious personal Injury. It is important to understand the meaning of the following HAZARD SIGNS before continuing: High Voltage and Shock Hazard: High voltage can cause electric shock. Turn off/unplug power before servicing. High Temperature Hazard: This part may cause scalding. Do not touch. Surface may be hot. 2

4 No Touching Hazard: This part may be hot or can cause electric shock. Do not touch. Use the following safety guidelines to help ensure your own personal safety and to help protect your equipment and surrounding environment from potential damage. This product is an indoor game machine. Do not install outdoors. Avoid installing in the following places to prevent fire, electric shock, injury and/or machine malfunctioning: Places subject to rain/moisture, or places subject to high humidity. Places subject to direct sunlight, or places subject to extremely hot or cold temperatures to ensure that it is used within the specified operating range. Places where inflammable gas may be present or in the vicinity of highly inflammable/volatile chemicals or items that can easily catch fire On unstable or sloped surfaces. The machine may topple or cause unforeseen accidents. Vicinity of fire exits, fire extinguishers etc that may block/prevent safety measures WARNING Non-technical personnel who do not have technical knowledge and Expertise should refrain from performing such work that this manual require or perform tasks which are not explained in this manual. Failing to comply can cause severe accidents such as electric shock or other serious injuries. WARNING: To reduce the risk of fire, electric shock or personal injury, unplug or disconnect the machine from the power supply before servicing. Note: The contents of this manual may be updated without notice. 3

5 1. SPECIFICATIONS Rated power supply: Min. Power consumption: 110V 50/60Hz 140W Max. Power consumption: 160W Dimensions: Weight: W1840 D1000 H (mm) About 212Kg NOTICE: After turning off the game, please wait at least 1 minute before restarting again. Note: Game parameters are subject to change without notice. 4

6 2. PACKAGE CONTENTS Open the package and make sure all the items are included: 1 x Body Assembly Following accessories No. Part No. Name Spec. Qty. Illustration Note 1 D AC power 10A/250V 1.8m 1 2 D Fuse T3A/250V(T6A/125V) Φ5-20mm 1 Choose by area 3 D Manual English 1 Choose by area 4 D Key Service door 5 D Key Coin box door Tot. 7 If any items are found to be missing, please contact your sales representative for help immediately. NOTE: Part models are subject to change without notice. 5

7 3. PART NAMES FRONT VIEW REAR VIEW 6

8 4. SET UP & INSTALLATION This product is an indoor game machine. Do not install outdoors. Refer to IMPORTANT SAFETY INSTRUCTIONS (Pg. 3) for places to avoid Place the unit on a dry level surface Ventilation openings in the back of the unit must not be obstructed by objects or by wall. 4.1 Play Zone This machine requires space for playing and for maintenance as shown below. Leave space around the game upon installation: Service area: 50cm Play area: 100cm 安全遮板 7

9 4.2 Level Adjustment Install this machine on a flat surface. Adjust levers to lift casters off the ground to level the game. If the game is installed on an unsuitable floor, it could cause a malfunction. To fix the game, adjust the Leveler down until it touches the floor, lifting the casters off the ground by 5mm. Repeat the same for all levelers. Leveler Caster About 5mm Move Fix NOTICE Make sure the machine is level with the ground and all the adjustable legs should stick to the floor closely. 8

10 4.3 Transporting the Game If you need to move the game, adjust the levelers back to an up position so the casters touch the ground. Leveler Caster Move NOTICE Be careful not to damage the machine during transport. The machine should be handled with care when bringing it down from a higher level. Always unplug the game before moving. Keep the machine in upright position during transport. For longer distance transport, package the game properly to prevent damages 9

11 4.4 Connecting Power WARNING: Check the voltage rating before you connect the equipment to an electrical outlet to ensure that the required voltage and frequency match the available power source. Please refer the label of the machine. Do not plug the equipment power cables into an electrical outlet if the power cable is damaged. Avoid putting many loads on one electrical outlet as it could generate heat and fire resulting from overload. Connect the grounding conductor to the earth terminal (GND): WARNING Ensure no heavy objects rest on the power cord. Check to make sure the game cabinet does not sit on the power cord as this could damage the cord and become hazardous. To disconnect the game, grip the plug and pull it from the wall outlet. Never pull by the cord. To prevent electric shock, do not touch the power plug when hand is wet. Ensure that nothing rests on the power cord and that it is not located where it can be stepped on or tripped over. 10

12 5. HOW TO PLAY Dino Pop is a new ball toss game for children and the whole family! This is a simple and fun game where players toss as many balls as they can into the Dino s mouth within the time limit. Tickets are awarded based on the final score. INSERT COIN(S), BALL WILL BE RELEASED AND GAME WILL START AUTOMATICALLY. DINO WILL MOVE UP, DOWN, LEFT AND RIGHT. TOSS AS MANY BALLS AS POSSIBLE INTO THE DINO S MOUTH TO EARN POINTS. BEAT THE BONUS SCORE TO WIN THE BONUS TICKET WILL BE AWARDED BASED ON SCORE. 11

13 6. GAME OPTION 6.1 Switching Control Signals Refer to the attached I/O chart and schematics. To adjust DIP, please refer to the I/O chart. The initial setting is in CAPITAL LETTERS. Main Board : 12

14 TESTING: Press the TEST button in the main board. LED Display BONUS LED<2>3-1 Time LED<1>7-5 Score LED<1>3-1 Testing - Options Test LED display; normal when it shows< > Press TEST button again and LED displays 1, it shows the LED 1and LED2 of 1# in DIP SW state. Press TEST button again and LED displays 2, it shows the number of on-off SW Press TEST button again and LED displays 3. Press TEST button and LED displays 4. Hold IN1-40 and it shows OUT1-40 corresponding lighting output. Press TEST button again and LED displays 5, it shows OUT1-40 corresponding lighting output. ERROR CODES The following error codes will display if the input signal is not in a normal state when the game is turned on but continues to operate even with the alarm on. E01 E02 E03 Ticket Assy. Reset error Score sensor error Ball gate sensor error 13

15 6.2 DIP adjust(default Setting) Note: Game parameters are subject to change without notice. 14

16 6.2 Parameter Settings DIP Adjust 1(SW1) (1)Coin(s) per game Item Coin(s) per game Content DIP Adjust(SW1) ON ON 2 off on 3 on off 4 off off Note (2)Game play time Item Game play time Content DIP Adjust(SW1) on on on 35 off on on 40 on off on 45 off off on 50 ON ON OFF 60 off on off 75 on off off 100 off off off Note (3)Mercy Tickets Item Mercy tickets Content DIP Adjust(SW1) on on 1 off on 2 on off 3 OFF OFF Note 15

17 (4)Score memory Item Score memory Content Yes No DIP Adjust(SW1) 8 ON off Note DIP Adjust 2(SW2) (5)Score per ball Item Score per ball Content DIP Adjust(SW2) on on 2 OFF ON 5 on off 10 off off Note (6)Score per ticket Item Score per ticket Content DIP Adjust(SW2) on on on 8 off on on 10 ON OFF ON 15 off off on 20 on on off 25 off on off 30 on off off 50 off off off Note 16

18 (7)Score to get BONUS score Item Score to get BONUS score Content DIP Adjust(SW2) on on on 150 off on on 200 ON OFF ON 250 off off on 300 on on off 350 off on off 400 on off off 600 off off off Note DIP Adjust 3(SW3) (8)BONUS score Item BONUS score Content DIP Adjust(SW3) ON ON ON 300 off on on 400 on off on 500 off off on 600 on on off 700 off on off 800 on off off 900 off off off Note (9)BONUS score + Item BONUS score + Content DIP Adjust(SW3) on on 5 OFF ON 10 on off 20 off off Note 17

19 (10)BONUS score max Item BONUS score max Content DIP Adjust(SW3) ON ON 600 off on 800 on off 999 off off Note DIP Adjust 4 (SW4) (11)Ticket payout max Item Ticket payout max Content DIP Adjust(SW4) No limit ON ON ON 6 off on on 8 on off on 10 off off on 12 on on off 14 off on off 16 on off off No payout off off off Note (12) No use SW SW3 SW ON ON ON ON ON ON 18

20 Input & output parts: Input part: INPUT CONTENT INPUT CONTENT INPUT CONTENT INPUT CONTENT J9-1 Ticket reset J9-11 J9-21 J9-31 J9-2 Score sensor J9-12 J9-22 J9-32 J9-3 Ball gate SW J9-13 J9-23 J9-33 J9-4 J9-14 J9-24 J9-34 J9-5 J9-15 J9-25 J9-35 J9-6 J9-16 J9-26 J9-36 J9-7 J9-17 J9-27 J9-37 J9-8 J9-18 J9-28 J9-38 J9-9 J9-19 J9-29 J9-39 J9-10 J9-20 J9-30 J9-40 Output part: OUTPUT CONTENT OUTPUT CONTENT OUTPUT CONTENT OUTPUT CONTENT J22-1 Lighting 1 J23-9 Ball gate motor J24-17 J4-1 J22-2 Lighting 2 J23-10 Motor L&R J24-18 J4-2 J22-3 Lighting 3 J23-11 Motor U&D J24-19 J4-3 LAT J22-4 Lighting 4 J23-12 J24-20 J4-4 CLOCK J22-5 J23-13 J24-21 J4-5 DATA J22-6 J23-14 J24-22 J4-6 J22-7 J23-15 J24-23 J4-7 J22-8 J23-16 J24-24 J4-8 OUTPUT CONTENT OUTPUT CONTENT OUTPUT CONTENT OUTPUT CONTENT J20-1 POT_L 1 J19-1 1#Coin lock J21-1 J20-2 POT_L 2 J19-2 1#SW signal J21-2 Ticket Assy. drive Ticket Assy. signal J27-1 Speaker _L+ J27-2 Speaker _L - J20-3 POT_R 1 J19-3 GND J V J28-1 Speaker _R + 19

21 J20-4 POT_R 2 J19-4 J21-4 GND J28-2 Speaker _R - J20-5 POT_L 3 J19-5 J21-5 Counter J20-6 POT_R 3 J V J21-6 J V J21-7 J V J21-8 J8-3 Coin counter J8-4 Ticket counter 20

22 7. MAINTENANCE, INSPECTION 7.1 Safety Check Check the points listed before operating the machine. These checks are necessary for safe machine operation: 1. Try to run the game before operation each day. 2. Conduct monthly routine checks of game components ensure good working condition 3. Check the machine regularly for dust and clean when necessary. Note: Parts and components require preventative maintenance to be kept running smoothly 7.2 Handling Precautions When installing or inspecting the machine, be very careful of the following points and pay attention to ensure that the player can enjoy the game safely. Non-compliance with the following points or inappropriate handling running counter to the cautionary matters herein stated can cause personal injury or damage to the machine WARNING Before servicing the machine, be sure to turn power off. Servicing without turning the power off can cause electric shock or short circuit. To avoid electric shock or short circuit, do not plug then unplug the power quickly Do not expose power cords and earth wires, these are susceptible to damage. Damaged cords and wires can cause electric shock or short circuit and should be replaced immediately. When or after installing the product, avoid pulling the power cord to prevent unnecessary wear and tear. Use the power button to disconnect power. In case the power cord is damaged, ask for replacement through where the product was purchased from or replace locally. Continued usage of damaged cord can cause fire, electric shock or leakage. Perform grounding appropriately. Inappropriate grounding can cause electric shock. Use fuses that meet specified rating. Fuses exceeding can cause an electric shock. Should a problem occur, turn off the power immediately and stop operating the machine. Unplug the power cord of the service outlet. Operating the machine without correcting the problem may cause a fire or injuries. Insert the power plug securely into the outlet. Poor contact may cause overheating, resulting in fire or burns. To ensure the warning labels attached on the machine are visible and legible, install the machine in a well-lit location, and keep the labels clean at all times. Make sure the labels are not hidden behind other game machines. 21

23 8. OVERALL CONSTRUCTION 9.1 Main Assembly 1: 22

24 No. Part No. Code Name Qty. Spec. Note 1 D DZPPL LED upper holder 1 Q235 δ1.5 2 D DZPPL LED L&R holder 1 2 Q235 δ1.5 3 D DZPPL LED L&R holder 2 2 Q235 δ1.5 4 D DZPPL-00-10M LED L&R board 2 Plywood δ9 5 D T5 daylight lamp 2 T5-21W 220V/blue 6 D DZPPL Speaker net 2 Halftone δ0.5 7 D DZPPL Fixation board B 1 Q235 δ1.5 8 D DZPPL Protect cover 1 Clarity PVC δ1 9 D DZPPL Relay holder 1 Electrolytic board δ= D TY-JX-008 Leveler 4 T5-21W 11 D DZPPL Assy. Protect board 1 Clarity PVC δ2 12 D TY-JX-001 Power supply holder 1 Electrolytic board δ D DZPPL L&R swing Assy. 1 Assembly 14 D DZPPL Ball gate Assy. 1 Assembly 15 D Castor D TY-JX-010 Leveler bracket 1 Q235 δ3 17 D DZPPL Fixation board A 1 Q235 δ D DZPPL Fixation board B 1 δ D DZPPL Ball gate reinforce board A 1 Q235 δ D DZPPL Ball gate reinforce board B 1 Q235 δ D DZPPL Playfield ornament 1 δ1 22 D DZPPL Up & Down swing Assy. 1 Assembly 23 D DZPPL LED menu 1 Clarity PVC δ3 24 D DZPPL-00-09M LED upper board 1 Plywood δ9 25 D Speaker 2 4 4Ω 15W 26 D T5 daylight lamp 1 T5-13W 220V/blue 23

25 9.2 Cabinet: 24

26 No. Part No. Code Name Qty. Spec. Note 1 D DZPPL Header Assy. 1 Assembly 2 D Φ60 lamp-chimney 41 Φ60 65 white D LED lamp 14 DC12V White 3 D LED lamp 13 DC12V Pansy D LED lamp 14 DC12V Yellow 4 D DZPPL-01-03M R_back board 1 Plywood δ15 5 D DZPPL R_side net 1 δ14 6 D DZPPL Front net 1 δ14 7 D DZPPL-01-16M Ball gate board 1 Plywood δ15 8 D DZPPL-01-13M Playfield 1 1 Plywood δ15 9 D DZPPL-01-04M R_front board 1 Plywood δ15 10 D DZPPL-01-06M Front board 1 Plywood δ15 11 D DZPPL Coin door Assy. 1 Assembly 12 D DZPPL-01-14M Playfield 2 1 Plywood δ15 13 D DZPPL-01-19M U_back door 1 Plywood δ15 14 D DZPPL-01-18M D_back door 1 Plywood δ15 15 D TY-JX-13 Wire box bracket 1 Q235 δ D DZPPL-01-01M L_back board 1 Plywood δ15 17 D DZPPL L_side net 1 δ14 18 D DZPPL-01-02M L_front board 1 Plywood δ15 25

27 9.3 Coin Door Assembly No. Part No. Code Name Qty. Spec. Note 1 D Lock D DZPPL Lock board Q235 δ2.5 3 D Lock D Ticket machine 1 CL-022Q D Coin machine 1 6 D TY-JX-002 Counter install board A Q235 δ1.5 7 D DZPPL Connect board 1 Q235 δ1.5 8 D TY-JX-007 Ticket box Q235 δ1 26

28 9.4 Header Assembly: No. Part No. Code Name Qty. Spec. Note 1 D DZPPL lamp-chimney 1 Clarity PVC δ3 2 D T5 daylight lamp 1 T5-21W 220V 3 D DZPPL Cabinet 1 Q235 δ1.5 4 D DZPPL Back board 1 Q235 δ1.5 27

29 9.5 Ball gate Assembly: No. Part No. Code Name Qty. Spec. Note 1 D DZPPL Fixation board 1 Q235 δ1.5 2 D DZPPL Moving board 1 Black POM δ6 3 D DZPPL Guide track 2 Q235 4 D DZPPL-01-15M Ball gate board 1 δ15 Plywood 5 D DC motor 1 ZGB37 DC12V 6 D DZPPL Motor fixation board 1 Q235 δ2 7 D bearing 1 d=6 D=10 L=15 8 D DZPPL rocker-arm C 1 45# δ8 9 D DZPPL SW bracket 1 Q235 δ D Micro. SW 1 28

30 9.6 Left and Right Swing Assembly: No. Part No. Code Name Qty. Spec. Note 1 D Nut 1 Q235 M24 2 D DZPPL Washer 1 #45 δ3 3 D Bearing D DZPPL Rotation pole 1 Q235 δ6 5 D single-phase Motor 1 YN80-25/80JB150G10 6 D DZPPL Motor holder 1 Q235 δ5 7 D DZPPL Rocker_arm A 1 45# δ14 8 D DZPPL Connect pole A 1 45# δ16 9 D Bearing 2 SI8E d=8 10 D DZPPL Assy. install bracket 1 Q235 δ5 29

31 9.7 Up and Down Swing Assembly: No. Part No. Code Name Qty. Spec. Note 1 D DZPPL Moving pole 1 Q235 δ3 2 D DZPPL Casing 1 Q235 δ3 3 D DZPPL Guide track 2 #45 δ12 4 D DZPPL sleeve 4 H62 5 D DZPPL Connect pole B 1 #45 δ12 6 D Bearing 2 SA6E d=8 7 D DZPPL Spring 1 8 D DZPPL Rocker arm B 1 #45 δ10 9 D Motor 1 YN80-25/80JB25G10 220V 30

32 9.8 Mouth Assembly: No. Part No. Code Name Qty. Spec. Note 1 D DZPPL Circumrotate arm 2 Stainless steel δ2 2 D DZPPL Connect sleeve 1 Stainless steel δ2 3 D Ring 1 Q235 d5 Black 4 D R type pin 1 Φ1.2 5 D DZPPL Baffle 1 PVC δ2 6 D DZPPL Dino 1 fiberglass 7 D DZPPL Connect pole 1 Stainless steel δ6 8 D Bearing 1 SI5E 9 D DZPPL Fixation board 1 Q235 δ2 31

33 9.11 Coin Counter & Electrical Box: Coin counter Ticket counter - Volume+ Ticket reset ON Fuse T6A OFF No. Part No. Code Name Qty. Spec. Note 1 D Counter 1 C-012 DC12V 2 D Pot. knob 1 Black 3 D Pot. Connect board 1 VR.PCB 4 D Button 1 PB:11C02R(Red) 5 D Fuse 1 Ф5 20mm T6A 125VAC (T3A 250VAC) 6 D Fuse holder 1 R V/250V/10A 7 D SW 1 T125/55 8 D Noise filter 1 10SS1-PB 115/250V10A 32

34 9.10 Electrical Part: No. Part No. Code Name Qty. Spec. Note 1 D LED PCB 3 LED23B3.PCB 2 D Main board 1 PLAY V9 3 D Lamp control board 1 LED CON-DDL.PCB(V1.0) 4 D Relay 1 SSR-25DA 5 D Fuse 1 Φ6 30mm T3A 250VAC 6 D Fuse holder 1 FS-10 7 D Power supply 1 EPT-H150S12 8 D Sensor 1 E3F-DS5C4 In the mouth 33

35 9.11 Game Decals: Front : 34

36 Back : 35

37 No. Part No. Code Name Spec. Qty. Note 01 D DZPPL-HM-02E Main menu δ D DZPPL-HM-04 L_board menu (PVC100u) 1 03 D DZPPL-HM-05 R_board menu (PVC100u) 1 04 D DZPPL-HM-01E Header menu δ D DZPPL-HM-13 Baffle menu PVC D DZPPL-HM-03 U_board menu (PVC100u) 1 07 D DZPPL-HM-07E Ball gate board menu (PVC100u) 1 08 D DZPPL-HM-06 Playfield menu (100u) 1 09 D DZPPL-HM-08E Front door menu (PVC100u) 1 10 D DZPPL-HM-14E Game description menu (100u) 1 11 D TY-HM-34 Ticket payout decal (PVC100u) 1 12 D TY-HM-01 Coin counter decal 30 6 (PVC100u) 1 13 D TY-HM-02 Ticket counter decal 30 6 (PVC100u) 1 14 D TY-HM-08 Ticket reset decal 30 6 (PVC100u) 1 15 D DZPPL-HM-10E L_board back menu (PVC100u) 1 16 D DZPPL-HM-09E L_board front menu (PVC100u) 1 17 D TY-HM-03 Volume decal 30 6 (PVC100u) 1 18 D DZPPL-HM-11E R_board front menu (PVC100u) 1 19 D DZPPL-HM-12E R_board back menu ( PVC100u) 1 20 D DZPPL -HM-15 T3A decal 10 7 (PVC100u) 1 21 D TY-HM-33 No touching decal (PVC100u) 1 22 D TY-HM-36 High voltage decal (small) (PVC100u) 1 23 D TY-HM-12 Fuse T6A decal 22 6 (PVC100u) 1 24 D TY-HM-10 Fuse T3A decal 22 6 (PVC100u) 1 25 D TY-HM-16 Power SW decal A 12 25(PVC100u) 1 26 D TY-HM-40 Label 110V 25 6 (PVC100u) 1 27 D TY-HM-41 Label 220V 25 6 (PVC100u) 1 28 D DZPPL-HM-16E CE authentication nameplate (δ0.5) 1 29 D DZPPL-HM-18E 220V nameplate (δ0.5) 1 30 D DZPPL-HM-17E CFF authentication nameplate (δ0.5) 1 31 D DZPPL-HM-19E 110V nameplate (δ0.5) 1 36

38 Have Questions? Contact us! Canada Office Parts & Service