Guru 3050 Laser Engraving Machine

Size: px
Start display at page:

Download "Guru 3050 Laser Engraving Machine"

Transcription

1 Guru 3050 Laser Engraving Machine Model GR3050 Working Area 300x500mm 12x20 in Laser Power 50w Laser Type: Sealed co2 laser tube or radio frequency tube Working Platform: Honeycomb or Fixture Resolving accuracy ±0.05mm no red dot

2 Graphic format supported: BMP, PLT, DST, AI, DXF, etc. Cooling mode: Water-cooled and protection system Working Voltage AC220±10, 50~60Hz, 10A max Operating temperature 0~45 Operating Humidity 5 ~95 no condensation Driver System: Stepper motor Total Size 980*680*280mm 38x26x11in Fast, high efficiency, improves the processing enterprise profit space. Equipped with all kinds of special working areas for more convenient and practical use. Uses stable quality CO2 laser tube, laser power supply, reducing the failure rate. Human body structure design, transportation, maintenance, debugging easy and convenient. The machine takes up little space, management operation control. The machine is mainly used in craft gifts industry. Such as wood carving, acrylic engraving, double color boards carving, etc. Applicable industry: Craft working industry Application: Thin wooden board, bamboo ware, hardboard Typical case: Brush carving, Musical instrument engraving, and bamboo ware.!2

3 !3

4 GR200F Fiber laser MarkingMachine Laser power 10W/20W Wavelength 1060nm!4

5 Beam quality m2 1.5 Laser Repeat frequency 100 KHz Standard Marking Scope mm 4.3x4.3in Optional Marking Scope mm 4x4in Marking Depth 1.2mm Marking Speed: 12000mm/s Minimum Line Width 0.01mm Minimum character 0.05mm Repeated accuracy ±0.001mm Consumption power 500W Power supply 110V/50Hz/10A Cooling mode: Air cooling High speed with galvanometer. Small volume, and light weight. Low power consumption, with power less than 500w. Completely air cooling, and low energy. If there are no severe environmental temperature changes. Also, if there is no power, a car cigarette lighter can be used for working as an alternative. Greatly reduces the depreciation cost, satisfying customers' stable large quantitates producing.!5

6 Applicable industry: gold & silver jewelry, sanitary ware, food packing, tobacco products, medicine packing, medical apparatus and instruments, watches & glassware, auto accessories, electronic hardware Applicable materials: gold & silver, stainless steel, plastic, glass, stone, leather, cloth, bamboo and so on Applicable show: auto accessories marking, tobacco products marking, beer bottle marking, ring marking, and electronic products marking.!6

7 GR960 Laser Cutter and Engraver Model: GR960 Working Area: 900X600mm (35X23in) Laser Type: sealed CO2 laser tube Laser Power: 80w Working table: blade or honeycomb Cooling Mode: water cooling and protection system Engraving Speed: 0-60,000mm/min Resolution Rate: ±0.05mm Minimum Character: English 1 1mm Supported Graphic Formats: BMP, HPGL, PLT, DST,AI!7

8 Controlling Software: DSP control system Compatible Software: CorelDraw, AutoCAD, Photoshop Driving System: Stepper Dimension: 1420*1020*1100mm (56x40x43 inches) Gross Weight: 300kg (660lb) Working Voltage: AC 220V±10%, 50-60Hz Working Temperature: 0-45 Working Humidity: 5-95% GR960 series machines adopt DSP digital controlling technology, self-design laser power supply, incorporated designed frame and structure to guarantee stable work. The newest software is matched to AutoCAD, CorelDraw CAD and all other graphics processing software for outputting original graphics. This series machines firstly use a USB port data interface which supports hot-plugging and momentary data transmission to recognize high efficiency without accounting computer resource. The LCD controlling panel brings friendly computer-human interface and easy operation. The most advanced DSP controlling technology developed firstly in this field offering functions of successive, rapid and curved cutting, optimization of shortest processing path to create high efficiency. Compensation of luminance decreasing is made automatically in the course of engraving to keep identical cutting in different areas. Production efficiency is greatly improved through using rapid controlling software for cutting and buffering function in high speed movement. Professional accessories suitable for various processing such as aluminum alloy honeycomb bottom board of different bore diameters made of aluminum alloy, metal columns of different intervals and negative pressure adsorption device for soft Materials can be provided according to customers demands and materials, which realizes design and processing on-the-spot. The newest software is matched to AutoCAD, CorelDraw CAD and all other graphics processing software for outputting original graphics.advanced color management supports any color and defines engraving sequences freely to recognize one or multiple outputs. It uses a USB port data interface with large mass storage device to provide high working speed and efficiency.!8

9 Applicable Industries: Garment, leather, clothes, toys, computer, embroidery cutting, mold, crafts, bamboo and wood, advertising and building decoration, packaging and printing, paper products, etc. Applicable Materials: Rubber, plastic, cloth, leather, woolens, crystal, organic glass, tile, jade, bamboo and wooden products, etc. Applications:!9

10 GURU1390/1410/1610 Laser Engraver and Cutter Model: GR1390/1410/1610 Working Area: 1300x900mm/1400x1000mm/1600x1000mm (51x35in/55x39in/63x39in) Laser Power: 100/130W Laser Type: sealed CO2 laser tube Working Platform: honeycomb or blade Working Speed: 1000mm/s (39 in/s) Resolution Rate: ±0.05mm Supported Graphic Formats: BMP, PLT, DST, AI, DXF, etc.!10

11 Cooling Mode: water cooling and protection system Control System: DSP System Driving System: Stepper Compatible software: CorelDraw, AutoCAD, Photoshop Working Voltage: AC110±10, 50~60Hz Working Temperature: 0~45 Working Humidity: 5 ~95 (without condensed water) Driving System: Stepper (optional Servo) GURU1390 series machines adopt DSP digital controlling technology, self-designing laser power supply, incorporate designed frame and structure to guarantee stable work. The newest software is matched to AutoCAD, CorelDraw CAD and all other graphics processing software for outputting original graphics. This series machines firstly uses a USB port data interface which supports hot-plugging and momentary data transmission to recognize high efficiency without accounting computer resources. The LCD controlling panel brings friendly computer-human interface as well as easy operation. The most advanced DSP controlling technology developed firstly in this field offers functions of successive, rapid and curved cutting, optimization of shortest processing path to create high efficiency. Compensation of luminance decrease is made automatically in the course of engraving to keep identical cutting in different areas. Production efficiency is greatly improved through using rapid controlling software for cutting and buffering function in high speed movement. Professional accessories suitable for various processing such as aluminum alloy honeycomb bottom board of different bore diameters made of aluminum alloy, metal columns of different intervals and negative pressure adsorption device for soft materials can be provided according to customers' demands and materials, which realizes design and processing on-the-spot. The newest software is matched to AutoCAD, CorelDraw CAD and all other graphics processing software for outputting original graphics. Advanced color management supports any color and defines engraving sequence freely to realize one time or whole output. It uses USB port data interface with large mass storage device to provide high working speed and efficiency.!11

12 Applicable Materials: Rubber, plastic, cloth, leather, woolens, crystal, organic, glass, tile, jade, bamboo, wood, etc. Applicable Industries: Rubber, plastic, cloth, toys, leather,computer embroidery cutting,mound,crafts,bamboo and wood,advertising and building decoration,packaging and printing,paper products. Typical Application: Acrylic crystal words, acrylic fish tank, ceramic crafts, rubber board printing, special-shaped trademark, engraving and hollowing out patterns or designs on garment and leather. Applications:!12

13 GR1326 laser cutting machine Model: GR1326 laser cutting machine Working area: 1300 x 2600mm (51x102in) Laser power: 100/130w Laser type: sealed co2 laser tube Working table type: blade worktable Working speed: 600mm/s (23 inches/s) Position precision: ±0.05mm Graphic format supported: BMP, PLT, DST, AI, DXF, etc. Cooling model: water cooling and protection system Working voltage: AC220 50~60Hz 10A Working temperature: 0~45!13

14 Operating humidity: 5 ~95 Driving system: Stepper motor Whole machine size: 3480x1880x950mm (137x74x37in) The machine adopt advanced DSP control system which continues and optimizes the cutting speed, processing paths to, improve the working efficiency. The clearance compensation ensures the processing quality. Fully supported CAD, CORELDRAW, PHOTOSHOP software, friendly man-computer interface. In the process of designing and producing-----stable mechanical design, imported linear guide rail and precision gear, make sure the high speed and high precision. Special treatment easily changeable blade or honeycomb worktable, easy maintained. Widely used, makes large size and different kinds of common board processing by laser machine possible Reasonable design of laser line with industry water chiller, it keeps the same power force on each spot, ensuring the quality of the cut. Multi-document function: The machine can store 256 files. The machine can still work out of computer. Application Industry: Advertising, model, arts and crafts, furniture etc. Application: Acrylic, MDF, acrylic, bamboo board, foam, glass, etc.!14

Shandong Oree Laser Technology Co.,Ltd.

Shandong Oree Laser Technology Co.,Ltd. Shandong Oree Laser Technology Co.,Ltd. Add : No.1166, Xinluo Ave Hi-tech Zone Jinan, Shandong, China Tel : +86-531-68621928 E-mail : sales@oreelaser.com Http : www.oreelaser.com Qualities are at the heart

More information

Product introduction. 一 pneumatic making machine brief introduction:

Product introduction. 一 pneumatic making machine brief introduction: Product introduction 一 pneumatic making machine brief introduction: 1 Through to be printed in English and Chinese characters, graphics content input computer, computer marking software to convert the

More information

i-hydro 7900 Water Vapor Transmission Rate Testing System

i-hydro 7900 Water Vapor Transmission Rate Testing System i-hydro 7900 Water Vapor Transmission Rate Testing System Online Data Management System for Packaging Testing- The ultimate cloud computing technology for test data processing and management Designed with

More information

LASER CUTTER LASER CUTTER VS. OTHER TOOLS LASER CUTTER CREATE & EXPAND YOUR PROJECT PORTFOLIO

LASER CUTTER LASER CUTTER VS. OTHER TOOLS LASER CUTTER CREATE & EXPAND YOUR PROJECT PORTFOLIO CREATE & EXPAND YOUR PROJECT PORTFOLIO Bridging the tradition of making with the future of digital creation, Dremel DigiLab Laser Cutter adds a new edge to your projects. Whether you re creating custom

More information

USER MANUAL. WINTER LASERMAX FIBER FL 30 Faser Lasermarkiermaschine. Leipzig

USER MANUAL. WINTER LASERMAX FIBER FL 30 Faser Lasermarkiermaschine. Leipzig H. Leipzig USER MANUAL WINTER LASERMAX FIBER FL 30 Faser Lasermarkiermaschine HENRIK WINTER HOLZTECHNIK GmbH Druckereistr. 8 D-04159 Leipzig-Stahmeln info@winter-holztechnik.de +49 (0) 341 / 461 90 21

More information

nanovis - Laser Marking Device

nanovis - Laser Marking Device nanovis - Laser Marking Device System Overview Laser for integration with innovative frequency self-adjustable system. The nanovis uses a new revolutionary laser technology with automonitoring of the frequency.

More information

LIBRA 32 LASER ENGRAVER:

LIBRA 32 LASER ENGRAVER: LIBRA 32 LASER ENGRAVER: Special design f carriage where 2 lens r 5 lens bth can be used. 5 lens gives yu better quality f cutting, if the thickness f material is mre than 10mm and 2 lens shuld be used

More information

i-gastra 7200 Gas Permeability Tester

i-gastra 7200 Gas Permeability Tester i-gastra 7200 Gas Permeability Tester Online Data Management System for Packaging Testing-The ultimate cloud computing technology for test data processing and management Designed with embedded computer

More information

User's Manual. Professional IR Thermometer with USB

User's Manual. Professional IR Thermometer with USB User's Manual Professional IR Thermometer with USB Please read this user's manual thoroughly before using this unit and keep it properly for your future reference. Contents 1. Introduction... 1 2. Features...

More information

SPECS

SPECS Leader in the manufacturing and distributing of memory solutions www.nuimpact.com Over 13 years in business Free setup Free 1-2 color print or 1-location engraving Free upload of up to 500MB 5-year limited

More information

RB-Rld-03. imodela CNC Milling Machine. Overview

RB-Rld-03. imodela CNC Milling Machine. Overview RB-Rld-03 imodela CNC Milling Machine Overview imodela is a completely new concept a digital hobby mill designed to support a range of unique creative pursuits, from miniatures and model railroading to

More information

Prices. Become a desktop 3D system expert and open up the creative possibilities CNC has to offer. Stable compact 3D system. Reliable and accurate

Prices. Become a desktop 3D system expert and open up the creative possibilities CNC has to offer. Stable compact 3D system. Reliable and accurate s Prices Become a desktop 3D system expert and open up the creative possibilities CNC has to offer. Stable compact 3D system Reliable and accurate Modular multifunctional system Router 3D Printer Foam

More information

Blu70. Laser cutting and engraving system. Technology this good has never been so affordable A S S E M B L E D I G N E D D E S

Blu70. Laser cutting and engraving system. Technology this good has never been so affordable   A S S E M B L E D I G N E D D E S Laser cutting and engraving system Technology this good has never been so affordable WWW.LOTUSLASER.COM What is? -DC is an enclosed (Class 2), plotter based, flying optic CO2 laser cutting and engraving

More information

Mini Cutting Plotter. NODE 101/ Cutok USER S MANUAL

Mini Cutting Plotter. NODE 101/ Cutok USER S MANUAL Mini Cutting Plotter NODE 101/ Cutok USER S MANUAL Thank you for purchasing cutter NODE 101 / Cutok. It can be used for cutting vinyl, heavy-cardstock, paper and sticker film as well as pen plotting. Please

More information

ACCURL FIBER LASER CUTTING MACHINE

ACCURL FIBER LASER CUTTING MACHINE ACCURL FIBER LASER CUTTING MACHINE ECOFIBER SERIES Shaping your future ACCURL FIBER LASER CUTTING MACHINE ECOFIBER SERIES ACCURL Fiber lasers outshine with its fast cutting and energy efficiency abilities

More information

LSM-500H/501H/503H/506H/512H Laser Scan Micrometer SERIES 544 Non-contact Measuring Units

LSM-500H/501H/503H/506H/512H Laser Scan Micrometer SERIES 544 Non-contact Measuring Units LSM-0H/1H/3H/6H/512H Laser Scan Micrometer SERIES 544 Non-contact Measuring Units LSM-0H LSM-6H LSM-1H LSM-3H LSM-512H Using a high speed scanning laser beam, the Laser Scan Micrometer can accurately measure

More information

SPECS

SPECS Custom USB Drives from a Canadian Memory distributor and manufacturer with over 13 years of experience in the computer industry. Free setup Free 1-2 color print or 1-location engrave Free upload of up

More information

TOP SELLING MODEL. Classic swivel USB drive with silver clip. Available in 5 colors: white, orange (021), blue (286C), black and red (185C).

TOP SELLING MODEL. Classic swivel USB drive with silver clip. Available in 5 colors: white, orange (021), blue (286C), black and red (185C). Custom USB Drives from a Canadian Memory distributor and manufacturer with over 15 years of experience in the computer industry. Free setup Free 1-2 color print or 1-location engrave Free upload of up

More information

Infrared Thermometer User Manual

Infrared Thermometer User Manual Infrared Thermometer User Manual Contents 1. Introduction... 2 2. Features... 2 3. Application... 2 4. Safety...3 5. Field of View...4 6. Specifications... 5 7. Meter Description...6 8. LCD Display Description...6

More information

Assembly and Maintenance

Assembly and Maintenance Assembly and Maintenance Assembly and Maintenance Test Pumps Pressure Test Pumps Tests all types of installations such as heating, compressed air and refrigeration systems, oil installations, fire lines

More information

Electromechanical Materials Testing Machines EM0 series

Electromechanical Materials Testing Machines EM0 series MICROTEST Electromechanical Materials Testing Machines EM0 MICROTEST - Electromechanical Materials Testing Machines EM0 series MICROTEST MICROTEST, S.A. Instruments and Equipments for Materials Testing

More information

S178A. Hand-Held Core-Alignment Fusion Splicer

S178A. Hand-Held Core-Alignment Fusion Splicer S178A Hand-Held Core-Alignment Fusion Splicer FITEL NEW Fusion Splicer The S178 is new state-of-art core alignment product in the Fitel S17x series. It is equipped with newly developed optical alignment

More information

VIS - Laser Marking System W

VIS - Laser Marking System W VIS - Laser Marking System 10-20-30-40W System Overview All Automator YAG lasers are manufactured with the highest quality sources available. VIS is a laser unit extremely light and solid, which perfectly

More information

Mitutoyo General Catalog

Mitutoyo General Catalog Mitutoyo General Catalog Laser scan micrometer List of products Move to other products LSM-500H/501H/503H/506H/512H LSM-902/6900 1 SPC 2 Caliper 3 Depth gage 4 Height gage 5 Micrometer 6 Inside micrometer

More information

IS-3000-LS-ABB INFRARED SCANNER

IS-3000-LS-ABB INFRARED SCANNER IS-3000-LS-ABB INFRARED SCANNER NON-CONTACT, RELIABLE, PRECISE, LONG RANGE POSITIONING FOR HOT OR COLD PRODUCTS FEATURES: SIMULATES ORIGINAL ABB PULSE OUTPUT AUTOMATIC GAIN CONTROL ADJUSTABLE SCAN ANGLE

More information

Nano DSC and MCDSC. Site Preparation Guide

Nano DSC and MCDSC. Site Preparation Guide Nano DSC and MCDSC Site Preparation Guide Revision A Issued May 2017 Table of Contents Table of Contents... 1 Ideal Setup... 2-3 MCDSC... 2 Nano DSC... 3 System Components... 4 Instrument Measurements...

More information

M12 Tool Holster

M12 Tool Holster Industry s Number One Sub-Compact System Need tool belt portability in your cordless tools, without sacrificing power and speed? Check out the expanded M12 LITHIUM-ION cordless system from Milwaukee the

More information

FoamDDI. Foam Digital Detection Imaging

FoamDDI. Foam Digital Detection Imaging FoamDDI Foam Digital Detection Imaging Foam Digital Detection Imaging Contamination products with strong surface tension and entrained air can create bubbles and foam. This phenomenon posses adverse effects

More information

PRECISION SURFACE GRINDING MACHINE

PRECISION SURFACE GRINDING MACHINE PRECISION SYSTEM 1 PRECISION SURFACE GRINDING MACHINE ACC 350 II Features : Powerful for precision grinding small component with minute, intricate like mold & die, jig & fixture etc. Operator centered

More information

China Dongguan Office: Jinsha Admin. Distric, Chang An Town, Dongguan, China China Tel: (86) China Fax: (86)

China Dongguan Office: Jinsha Admin. Distric, Chang An Town, Dongguan, China China Tel: (86) China Fax: (86) Hong Kong Office: Flat 2, 10/F, Fuk Hong Industrial Building, 60-62B Tong Mi Road, Mongkok, Kowloon, Hong Kong H.K. Tel: (852) 3188 2335 H.K. Fax: (852) 3188 4883 China Dongguan Office: Jinsha Admin. Distric,

More information

LSV-300 Laser Surface Velocimeter

LSV-300 Laser Surface Velocimeter LSV-300 Laser Surface Velocimeter Non-Contact Velocity and Length Measurements Precision Non-Contact Cost-Effective Large Standoff Distance Laser Surface Velocimeter Compact, Reliable, Rugged and Precise

More information

USB prices July Valid from: 05/07/2011

USB prices July Valid from: 05/07/2011 31/07/2011 Twister USB stick with Doming Additional Colours: Quantity 512 mb 1 gb 2 gb 4 gb 8 gb 16 gb 1Z391740 black 1Z391760 navy 100 3.03 3.73 4.14 5.14 9.61 21.15 Unit Size: 76x20x10mm 1Z391750 white

More information

Precision Cutting of Printed Circuit Boards and Cover Layers UV Laser Cutting with LPKF MicroLine 2000 Systems

Precision Cutting of Printed Circuit Boards and Cover Layers UV Laser Cutting with LPKF MicroLine 2000 Systems Precision Cutting of Printed Circuit Boards and Cover Layers UV Laser Cutting with LPKF MicroLine 2000 Systems Beaming Cutting-Edge Technology LPKF UV laser cutting systems quickly, cleanly, and precisely

More information

Laser-Jet Laser Cutting Systems Laser-Jet / Faserlaser

Laser-Jet Laser Cutting Systems Laser-Jet / Faserlaser Laser Cutting Systems Laser-Jet 1512 2512 / Faserlaser Equipped with fiber lasers with various beam powers. Lowest operating cost due to highest efficiency. Laser Cutting Systems with extremely small foot-print

More information

TMJ-9712 Programmable Temperature & Humidity Chamber

TMJ-9712 Programmable Temperature & Humidity Chamber TMJ-9712 Programmable Temperature & Humidity Chamber The TMJ-9712 Programmable Temperature & Humidity chamber is designed to test a wide range of materials including: Plastic, Rubber, Films, Packaging

More information

PTB 420 Auto. Fully Automated 4 in 1 Tablet Testing Instrument

PTB 420 Auto. Fully Automated 4 in 1 Tablet Testing Instrument PTB 420 Auto Fully Automated 4 in 1 Tablet Testing Instrument The fully automated 4 in 1 tablet testing instrument PTB 420 Auto is a dual test mode instrument to determine the weight, diameter, thickness

More information

DaVinci Systems. Features Machine Specifications And Bid Proposals

DaVinci Systems. Features Machine Specifications And Bid Proposals DaVinci Systems Features Machine Specifications And Bid Proposals Chapter Three Catalog Numbers DaVinci 8x8: HL33SBME242500 DaVinci 8x10: HL33SBME242510 DaVinci 10x12: HL33SBME242512 DaVinci 14x19: HX33VBME242201

More information

HyperRapid NX SmartCleave

HyperRapid NX SmartCleave High-Speed and High-Quality Brittle Material Processing is an industrial high-power picosecond laser that is specifically optimized for high-speed and high-quality cutting of transparent and brittle materials.

More information

The Oscar System Evolution

The Oscar System Evolution P.O. Box 30684 Amarillo, Texas 79120 806-381-8898 THE OSCAR SUPER PRO JEWELER S CNC SYSTEM The Oscar System Evolution Oscar was developed by Dan DeArmond, owner of DeArmond Enterprises. Dan has over 30

More information

Features. Easy operation and high irradiation performance. LCD LCD board terminals. Sealing the joint between the board and LCD

Features. Easy operation and high irradiation performance. LCD LCD board terminals. Sealing the joint between the board and LCD 1343 Curing System UJ3/UJ3 RoHS compliance PHOTO PHOTO MEASURE UJ3 UJ3 panasonic-electric-works.net/sunx Features User-friendly simple interface Temperature feedback for stable irradiation Capable of auto-tuning

More information

Precision Hand-held Thermometer

Precision Hand-held Thermometer Precision Hand-held Thermometer measuring monitoring analysing Measuring range from -220 C... +1768 C Measuring accuracy starting with ±0.03% MV Large selection of temperature probes PT 100 or thermocouple

More information

N A R E X. SteelTailor G3 - World Best Seller Gantry CNC Cutting Machine. Description:

N A R E X. SteelTailor G3 - World Best Seller Gantry CNC Cutting Machine. Description: N A R E X SteelTailor G3 - World Best Seller Gantry CNC Cutting Machine Description: 1. For cutting large-sized thick metal plates and other heavy duty tasks; Satisfy customers' needs for mass production.

More information

CNC Plasma Cutters, CNC Router Tables, CNC Water Jet Tables, CNC Pipe Cutters

CNC Plasma Cutters, CNC Router Tables, CNC Water Jet Tables, CNC Pipe Cutters CNC Plasma Cutters, CNC Router Tables, CNC Water Jet Tables, CNC Pipe Cutters One Stop For All Your CNC Industrial Cutter Tables Made In The USA! Spitfire Linear precision guide rails Automatic Torch Height

More information

Precision Cutting of Printed Circuit Boards and Cover Layers UV Laser Cutting with LPKF MicroLine 2000 Systems

Precision Cutting of Printed Circuit Boards and Cover Layers UV Laser Cutting with LPKF MicroLine 2000 Systems Precision Cutting of Printed Circuit Boards and Cover Layers UV Laser Cutting with LPKF MicroLine 2000 Systems Beaming Cutting-Edge Technology LPKF UV laser cutting systems quickly, cleanly, and precisely

More information

Environmental simulation chambers MK MKF MKT MKFT

Environmental simulation chambers MK MKF MKT MKFT Environmental simulation chambers MK MKF MKT MKFT 2 Environmental simulation chambers from BINDER Perfectly matched to testing standards. Optimally designed for reliability. We were the first to realize

More information

LASER MARKING. New AREX 30W. AREX 30W Product Announcement 1/14

LASER MARKING. New AREX 30W. AREX 30W Product Announcement 1/14 LASER MARKING New AREX 30W AREX 30W Product Announcement 1/14 Datalogic Industrial Automation Laser Marking has the pleasure to announce the new AREX 30W, new entry on AREX family Fiber Laser markers.

More information

GROMMETS. Kitchens. Doors. Kitchen Accessories. Hinges. Drawer Slides. Plywood Melamine. Veneer Edgebanding. Laminate. Solid Surface.

GROMMETS. Kitchens. Doors. Kitchen Accessories. Hinges. Drawer Slides. Plywood Melamine. Veneer Edgebanding. Laminate. Solid Surface. Brush Grommet 363 Adjustable Grommet with Bristles Features: Overlapping Trim Edge In Top System Screw Hole To Permanently Attach Grommet To Adjustable From 2 3/8-60mm To 2 1/2-63.5mm Item #H6837 Adjustable

More information

Data Sheet: LDS 1367 Date:

Data Sheet: LDS 1367 Date: Product: Electronic Digital Measuring Set Page 1 of 5 Digital Caliper and Electronic Micrometer Set Set contains: 1 x Electronic Caliper: 150mm/6 1 x Electronic Micrometer: 0-25/0-1 mm Housed in a fitted

More information

V-400 Laser Engraving and Cutting System Safety, Installation, Operation, and Basic Maintenance Manual

V-400 Laser Engraving and Cutting System Safety, Installation, Operation, and Basic Maintenance Manual V-400 Laser Engraving and Cutting System Safety, Installation, Operation, and Basic Maintenance Manual Universal Laser Systems, Inc. 16008 North 81st Street Scottsdale, AZ 85260 USA Customer Support Department

More information

ADP Dot Peen Marking Machine

ADP Dot Peen Marking Machine ADP25120- Dot Peen Marking Machine Marking area 25x120mm 1x4.6" Air supply/filter Drive Air Marking head Controller Benchtop Mode Handheld Mode Power supply High quality at higher speed Extremely precise

More information

LANYARDS CATALOGUE TGL_V1 PREMIUM

LANYARDS CATALOGUE TGL_V1 PREMIUM LANYARDS CATALOGUE TGL_V1 PREMIUM Printings Materials NEW! 100% PET recycled Page 11 Flock Printing Page 7 Accessories Gold Printing or Silver Page 8 Checker design Page 11 Gold metal hook Page 35 Jeans

More information

Advanced Test Equipment Rentals ATEC (2832) PANAMETRICS. 25DL Multi-Mode Ultrasonic Thickness Gage with Internal Datalogger

Advanced Test Equipment Rentals ATEC (2832) PANAMETRICS. 25DL Multi-Mode Ultrasonic Thickness Gage with Internal Datalogger Established 1981 Advanced Test Equipment Rentals www.atecorp.com 800-404-ATEC (2832) PANAMETRICS 25DL Multi-Mode Ultrasonic Thickness Gage with Internal Datalogger 25DL Easy to use Uses contact, delay

More information

Chapter 3. Experimental Procedure

Chapter 3. Experimental Procedure Chapter 3 Experimental Procedure 33 3.1 Burner Systems Startup 3.1.1 Instrumentation power up The instrumentation of the burner including the PC need to be turned on, in order to provide safe ignition

More information

ELECTRONIC CALIPER. Range 0-150mm/0-6" 0-200mm/0-8" 0-300mm/0-12" Code

ELECTRONIC CALIPER. Range 0-150mm/0-6 0-200mm/0-8 0-300mm/0-12 Code ELECTRONIC CALIPER Code 1114-150 1114-200 1114-300 Range 0-150mm/0-6" 0-200mm/0-8" 0-300mm/0-12" Zinc alloy case Resolution: 0.01mm/0.0005" Buttons: zero, power on/off, inch/mm Battery SR44, with one spare

More information

MH-A UNIVERSAL ULTRASONIC (LIQUID) LEVEL METER

MH-A UNIVERSAL ULTRASONIC (LIQUID) LEVEL METER MH-A UNIVERSAL ULTRASONIC (LIQUID) LEVEL METER Product Introduction MH-A Universal Ultrasonic (liquid) level meter, is our company based on years of experience in the development and manufacture of universal

More information

SAGE SCIENCE INC. BluePippin Installation Guidelines Rev. A Originated March 9, 2015 Revised: Page 1 of 7. Prepared by: Alex Vira SUMMARY

SAGE SCIENCE INC. BluePippin Installation Guidelines Rev. A Originated March 9, 2015 Revised: Page 1 of 7. Prepared by: Alex Vira SUMMARY SAGE SCIENCE INC BluePippin Installation Guidelines 460009 Rev. A Originated March 9, 2015 Revised: Page 1 of 7 Prepared by: Alex Vira SUMMARY This guideline documents requirements and procedures for users

More information

Small Tensile Testers for universal usage Z3, Z5 Z10 Z20, Z50. page 1

Small Tensile Testers for universal usage Z3, Z5 Z10 Z20, Z50. page 1 Small Tensile Testers for universal usage Z3, Z5 Z10 Z20, Z50 page 1 Standard Machines for tension and compression made of massive Aluminum and stainless steel ball bearings and ball screws bellows to

More information

Wolf Laboratories Limited

Wolf Laboratories Limited Wolf Laboratories Limited www.wolflabs.co.uk Tel: 01759 301142 Fax:01759 301143 sales@wolflabs.co.uk Use the above details to contact us if this literature doesn't answer all your questions. Pricing on

More information

Tutorial 1 Engraved Brass Plate R

Tutorial 1 Engraved Brass Plate R Getting Started With Tutorial 1 Engraved Brass Plate R4-090123 Table of Contents What is V-Carving?... 2 What the software allows you to do... 3 What file formats can be used?... 3 Getting Help... 3 Overview

More information

Copyright 2018 Xi'an NovaStar Tech Co., Ltd. All Rights Reserved. No part of this document may be copied, reproduced, extracted or transmitted in any

Copyright 2018 Xi'an NovaStar Tech Co., Ltd. All Rights Reserved. No part of this document may be copied, reproduced, extracted or transmitted in any CVT4K-S Fiber Converter Document Version: V1.0.1 Document Number: NS110100433 Copyright 2018 Xi'an NovaStar Tech Co., Ltd. All Rights Reserved. No part of this document may be copied, reproduced, extracted

More information

EVERYTHING FOR YOUR CAR CAR & CO

EVERYTHING FOR YOUR CAR CAR & CO EVERYTHING FOR YOUR CAR CAR & CO 56-0407100 58-8106022 56-0407110 / Bluetooth hands-free equipment FREE DRIVE: Bluetooth version 4.0, range: approx. 10 m, high-performance rechargeable battery, Micro-USB

More information

New and Most Popular Classes

New and Most Popular Classes 2018 - New and Most Popular Classes Tel: 219.922.6121 Fax: 219.922.0799 www.z-techenerprises.com email: sales@z-techenterprises.com Raspberry Pi computer with Raspbian and KODI This class will cover the

More information

MMX Blade. Light source Philips MSR Platinum 35. Light output lm. Zoom range 8,5-45,5

MMX Blade. Light source Philips MSR Platinum 35. Light output lm. Zoom range 8,5-45,5 MMX Blade The Robin MMX Blade is based on the new technology MMX discharge fixture, comparable output to 1200 W luminaires, the MMX Blade adds a framing shutter system into the optical path. Four fast,

More information

Advertising gift Business gifts

Advertising gift Business gifts Advertising gift Business gifts Contents Home, leisure Electronics P.11 P.6 Writing Key holders P.18 P.4 Work, office P.8 3 Luminous engraving* AL 24 LED luminous ball pen 05 06 10 WEIGHT: 21 g / SIZE:

More information

MI-4 Melt Flow Indexer

MI-4 Melt Flow Indexer Göttfert Werkstoff-Prüfmaschinen GmbH Siemensstraße 2 74722 Buchen E-Mail: info@goettfert.de Internet: http://www.goettfert.com WERKSTOFF-PRÜFMASCHINEN GMBH MI-4 Melt Flow Indexer This unique melt indexer

More information

THUNDER LASER SYSTEMS

THUNDER LASER SYSTEMS SYSTEMS User s manual for December 31, 2015 Original Instruction 1 DONGGUAN EQUIPMENT CO.,LTD Introduction This manual has been designated as the thunder laser systems, laser cutting machine installation

More information

Technical sheet. Page - 1 ADP 5090 AC x90mm, dove il pistoncino si muove lungo gli assi X e Y con una precisione micrometrica.

Technical sheet. Page - 1 ADP 5090 AC x90mm, dove il pistoncino si muove lungo gli assi X e Y con una precisione micrometrica. Page - 1 ADP 5090 AC 500 50x90mm, dove il pistoncino si muove lungo gli assi X e Y con una precisione micrometrica. AD5090 system marks permanently different materials, such as metals, aluminum, iron,

More information

Model KT 53 Cooling incubators with thermoelectric cooling

Model KT 53 Cooling incubators with thermoelectric cooling Model KT 53 Cooling incubators with thermoelectric cooling The KT series combines outstanding performance with impressive energy efficiency and environmental friendliness. The cooled incubators of the

More information

Particle size range (0.8 microns 1000 microns)

Particle size range (0.8 microns 1000 microns) Occhio FC00M TECHNICAL DATASHEET Reference code: OCC4-0 Occhio Flowcell FC00 M Particle size range (0.8 microns 000 microns) Technical specifications Working conditions Working temperature 5-40 C non condensing

More information

Refrigerated incubators with forced convection

Refrigerated incubators with forced convection KB series (E3.1) Incubators Refrigerated incubators with forced convection The most versatile incubator for microorganisms: The BINDER KB series controls a temperature range of -5 C to 100 C. With its

More information

LASER LASER OEM MARKING KIT - CO 2 PHOTONICS

LASER LASER OEM MARKING KIT - CO 2 PHOTONICS LASER PHOTONICS OEM MARKING KIT - CO 2 LASER The F100 is completely sealed, requires no gas connections and produces a beam that processes material at an average power of 100W. This is due to the combination

More information

Instruction Manual Ultrasonic Thickness gauge DC3020

Instruction Manual Ultrasonic Thickness gauge DC3020 Instruction Manual Ultrasonic Thickness gauge DC3020 V 7.11 CONTENTS 1.General Description... - 1-2.Technical Specifications... - 1-3. Standard Delivery... - 2-4. Overview the Display Unit... - 2-5. Keypad

More information

LaserTower DESKTOP LASER MARKING AND ENGRAVING SYSTEM

LaserTower DESKTOP LASER MARKING AND ENGRAVING SYSTEM Industries Defense Government Aerospace Automotive Metal Fabrication Direct Parts Marking Medical & Many More! GS-21F-0041T The is designed to support low-profile, flat marking applications. This type

More information

Penetration - Bitumen Method - PNR 12 (automatic)

Penetration - Bitumen Method - PNR 12 (automatic) Penetration - Bitumen Method - PNR 12 (automatic) Standards depend on the selected accessories ASTM D 5, DIN 52010 (obs.), EN 1426, EN 13179-2, EN 13880-2, JIS K2207, AASHTO T49 Product group(s): Bitumen,

More information

PRODUCT ASSORTMENT. for sanitary areas and interior construction. Premium grinding tools since

PRODUCT ASSORTMENT. for sanitary areas and interior construction. Premium grinding tools since PRODUCT ASSORTMENT for sanitary areas and interior construction Premium grinding tools since 1919 www.tyrolit.com TYROLIT GROUP 2 TYROLIT Group A global company As one of the world s leading manufacturers

More information

Linear Luminaire with LED Series 6012/5

Linear Luminaire with LED Series 6012/5 > For use in Zones 1 & 2, 21 & 22 > Latest LED technology with a high luminous efficacy and a long service life > Extra flat version for low mounting depth > Powder-coated sheet-steel or brushed stainless

More information

USER MANUAL. User Manual 17 / 19 LCD. NVP117 / NVP119 1U LCD Console Drawer. Options : - AV / DVI-D / HDMI / Audio - Full Range KVM - DC power

USER MANUAL. User Manual 17 / 19 LCD. NVP117 / NVP119 1U LCD Console Drawer. Options : - AV / DVI-D / HDMI / Audio - Full Range KVM - DC power USER MANUAL 17 / 19 LCD NVP117 / NVP119 1U LCD Console Drawer Options : - AV / DVI-D / HDMI / Audio - Full Range KVM - DC power Contents < Part. 1 > NVP117 / NVP119 1.1 Package Content 1.2 Structure Diagram

More information

64//CAP-ON PEN DRIVES. PD-049 Metal Flash Drive. PD-113 Tube Pen Drive with Keychain. PD-155 Lego Shaped USB Drive. PD-117 Rounded Color Flash Drive

64//CAP-ON PEN DRIVES. PD-049 Metal Flash Drive. PD-113 Tube Pen Drive with Keychain. PD-155 Lego Shaped USB Drive. PD-117 Rounded Color Flash Drive 64//CAP-ON PEN DRIVES PD-049 Metal Flash Drive Size 5.8 x 1.5 x 0.7 cm PD-113 Tube Pen Drive with Keychain Size 5 x 1.65 cm Colour Black, White, Blue, Orange, Green, Red PD-155 Lego Shaped USB Drive Size

More information

LSV-300 Laser Surface Velocimeter. Non-Contact Velocity and Length Measurements

LSV-300 Laser Surface Velocimeter. Non-Contact Velocity and Length Measurements LSV-300 Laser Surface Velocimeter Non-Contact Velocity and Length Measurements Laser Surface Velocimeter Compact, Reliable, Rugged and Precise Polytec s Industrial Laser Surface Velocimeters (LSV) are

More information

Non-Contact Thickness Measurement

Non-Contact Thickness Measurement Non-Contact Thickness Measurement It's Our Business to be Exact! Reliable accuracy and exceptional repeatability for the most demanding thickness testing applications. Applications CONTACT AND INTRAOCULAR

More information

TMP3200/090 DATASHEET

TMP3200/090 DATASHEET TMP3200/090 Marking System General Arrangement System Overview The TMP3200/090 marking system permanently prints messages into a variety of materials such as steel, aluminum, and plastic. A hardened pin

More information

RL70 INDUSTRIAL FLUORESCENT TUBE LIGHT

RL70 INDUSTRIAL FLUORESCENT TUBE LIGHT 32 RL70 INDUSTRIAL FLUORESCENT TUBE LIGHT FEATURES: RL70 CE Series - For compact fluorescent lamps and electronic ballast (CE) RL70 E Series - For standard bi-pin T5, T5HO and T8 lamps, electronic ballast

More information

4-Port HDMI KVM Switch - USB p

4-Port HDMI KVM Switch - USB p 4-Port HDMI KVM Switch - USB 3.0-1080p Product ID: SV431HDU3A2 This 4-Port USB 3.0 HDMI KVM switch lets you control four HDMI computers with a single monitor, keyboard and mouse. The KVM also features

More information

Stress-Free Depaneling of Assembled Boards LPKF MicroLine 6000 S

Stress-Free Depaneling of Assembled Boards LPKF MicroLine 6000 S Stress-Free Depaneling of Assembled Boards LPKF MicroLine 6000 S Laser Depaneling Closer to the Edge The LPKF MicroLine 6000 S helps to significantly improve the process control in PCB depaneling operations:

More information

Tutorial 1 Bulls Head Sign

Tutorial 1 Bulls Head Sign Getting Started With Tutorial 1 Bulls Head Sign VCarve Pro Disclaimer All CNC machines (routing, engraving, and milling) are potentially dangerous and because Vectric Ltd has no control over how the software

More information

Tutorial 3 Model Locomotive Name plate

Tutorial 3 Model Locomotive Name plate Getting Started With Tutorial 3 Model Locomotive Name plate Cut2D Disclaimer All CNC machines (routing, engraving, and milling) are potentially dangerous and because Vectric Ltd. has no control over how

More information

Digital Video Inspection

Digital Video Inspection Digital Video Inspection Modular Inspection Solutions GatorCam3 EDENBROS, LLC PO Box 3987 Naperville, IL 60567 Ph: (800) 526-5246 Fax: (800) 807-9368 info@edenbros.com www.edenbros.com Digital Quality

More information

3 SERIES DIGITAL REGISTRATION SYSTEM. CompuTER WORKSTATION PRECISION

3 SERIES DIGITAL REGISTRATION SYSTEM. CompuTER WORKSTATION PRECISION About US TM SERIES Engineered to complement the fast-paced printing industry of today, MultiCam s Celero Series is the next generation of Digital Cutting Systems as they offer one of the fastest knife

More information

Model 90. thermwood. Thermwood CNC Machining Centers. Machine Features Shown

Model 90. thermwood. Thermwood CNC Machining Centers. Machine Features Shown 22017 MADE IN USA 5 Axis Model 90 Thermwood, the industry leader in 5 Axis applications with more five-axis systems in operation than any other company. These 5 Axis CNC routers have become the accepted

More information

4 Port Triple Monitor DVI USB KVM Switch with Audio & USB 2.0 Hub

4 Port Triple Monitor DVI USB KVM Switch with Audio & USB 2.0 Hub 4 Port Triple Monitor DVI USB KVM Switch with Audio & USB 2.0 Hub Product ID: SV431TDVIUA The SV431TDVIUA 4-Port Triple Monitor DVI USB KVM Switch allows 4 PCs (each with 3 DVI video outputs) to share

More information

Penetration: Penetrometer PNR 12 (Bitumen)

Penetration: Penetrometer PNR 12 (Bitumen) Penetration: Penetrometer PNR 12 (Bitumen) Standards depend on the selected accessories ASTM D5, EN 1426, JIS K 2207 Product group(s): User group(s): Scope: Consistency & Ductility Airports & Aviation,

More information

The Design and Implementation of the Micro Laser Engraving Machine Based on STM32

The Design and Implementation of the Micro Laser Engraving Machine Based on STM32 International Conference on Education, Management and Computer Science (ICEMC 2016) The Design and Implementation of the Micro Laser Engraving Machine Based on STM32 Zhenhua Wang1, a *, Linna Xu2, b, Xianzheng

More information

Products quick finder

Products quick finder Products quick finder Showcard Frame Systems & Accessories...5-13 Label Holders...15-25 Office Supplies...27-29 Brochure Holders...31-35 Display & Information Holders...37-41 Acrylic Products...43-46 Hanging

More information

Minimizing Downtime. High Efficiency and Economy. Highly Reliable Design. Tuning for Dedicated

Minimizing Downtime. High Efficiency and Economy. Highly Reliable Design. Tuning for Dedicated < LASER C series Compact CO2 LASER with High Reliability, High Performance and High Functionality FANUC LASER C series i-model C is designed for Series 30i/31i-LB, which is compact, high-performance and

More information

Blue e+ chillers with the principle

Blue e+ chillers with the principle Blue e+ chillers with the principle Blue e+ chillers The world s most efficient range of chillers. The principle: Efficient Energy savings of up to 70% thanks to DC inverter technology Flexible Worldwide

More information

Metis M309 / M316 / M318

Metis M309 / M316 / M318 Metis M309 / M316 / M318 High-End 1-Color Radiation Pyrometers Pyrometers for non-contact temperature measurement in short wavelength spectral range, primarily for measurements on metals and bright and

More information

AV6471A FTTH OPTICAL FIBER FUSION SPLICER

AV6471A FTTH OPTICAL FIBER FUSION SPLICER AV6471A FTTH OPTICAL FIBER FUSION SPLICER Summary: AV6471A is an optical fiber splicing device with a brand new design for FTTH. Lightweight and compact makes it is easy to use even in confined space.

More information

Insertion Flowmeter for compressed air and gases DN50 - DN700 (2-28 )

Insertion Flowmeter for compressed air and gases DN50 - DN700 (2-28 ) The flow meter is based on the thermal mass flow measurement and is ideal for measuring the flow of compressed air and gases in pipes from DN50 (2 ) to DN700 (28 ). With the, the consumption of compressed

More information

Innovative Technologies.

Innovative Technologies. Innovative Technologies. Fiber Laser Cutting Machine Meeting The Fiber Laser Cutting Machine... Ermaksan presents the new Fiber Laser Cutting Machine FIBERMAK to its user s service. FIBERMAK is a peerless

More information

COLLABORATIVE MULTI-TOUCH EXPERIENCE ATP-IFP-5500 / ATP-IFP-6500 / ATP-IFP Features. Interactive Flat Panel (IFP) Collaboration Monitor

COLLABORATIVE MULTI-TOUCH EXPERIENCE ATP-IFP-5500 / ATP-IFP-6500 / ATP-IFP Features. Interactive Flat Panel (IFP) Collaboration Monitor COLLABORATIVE MULTI-TOUCH EXPERIENCE Arrive TouchPoint is an interactive, USB connected multi-touch, high definition flat panel monitor that operates as a touch-mouse device when connected to a PC. This

More information