The Complete System Solution!

Transcription

1 dvantages of the Class 6 Solid State Relay The Complete System Solution! Optional Heat Sink (SSR-HS-1) Section 3 p. Optional Thermal Pad (SSR-TP-1) Section 3 p.21 We at Magnecraft strive to be your one-stop-shop for all of your solid state relay needs. The new line of 6 series solid-state relays give industrial relay users an energy-efficient current switching alternative. Depending on the application, these solid-state relays offer a number of advantages over electromechanical relays, including longer life cycles, less energy consumption and reduced maintenance costs. This is why great care and attention was given when developing the next generation of Hockey Puck style SSRs. These new SSRs will be fingersafe, fit a pre-cut heat transfer thermal pad (sold separately) and have the ability to be mounted onto a factory tested pre-drilled and tapped heat sink (sold separately). Magnecraft s expertise in both SSR design and thermal management enables us to provide customers with a solution to their solid state relay requirements. This solution comes ready-to-use, virtually eliminating in-house assembly and complex heat sink calculations. Furthermore, each SSR, thermal pad (sold separately) and heat sink assembly (sold separately) utilizes the reliability and technology only available in our 6 series solid state relays. These features, coupled with Magnecraft s superior customer service and engineering support team, provide our customers with a level of convenience not easily found in the market today! 4/1 Legacy Magnecraft Solution Guide 5

2 The Class 6 is also available with. The new finger-safe Class 6* Hockey Puck Style Solid State Relay (SSR) expands and enhances the current Magnecraft Solid State Relay product line. This product features a finger-safe cover and LED Status Indicator. The optically coupled circuitry isolates the input from the output to give pure solid state performance. This product carries with it agency certifications from UL, CS, and CE. *vailable for products up to mps (C Load) and 12 mps (DC Load). Finger Safe Protects Operators from live circuits. Input Indication LED. Optically Coupled Circuit NO Interference between seperate circuits. Solid State Circuitry No Moving Parts Involved. Magnecraft Solution Guide 5 Panel Mounting New Internal Snubber Protects from Transients. 4/19

3 Class 6 Solid State Relays/, SPST-NC,, -1 mp Rating LED Status Lamp Internal Snubber Solid State Circuitry. No Moving Parts Panel Mounting General Specifications (@ C) Output Characteristics Number and type of Contacts Switching Device Current rating Switching voltage Switching Type Maximum Rate of Rise Off State oltage (dv/dt) Incandescent Lamp mpere Rating (rms) Motor Load Rating (rms) Min. Load current to maintain on Non-Repetitive Surge Current (1 cycle) Max. RMS overload current (1 second) Max. Off state leakage current (rms) Peak Blocking oltage Typical On State oltage Drop (rms) Max. On State oltage Drop (rms) Maximum I² T for Fusing (²) (UL ) Superceding Part # Units /us m m pk 62XXSZS-C90 62SX C C C 72 Input Characteristics oltage Range Must Release oltage Nominal Input Impedance Typical Input 5DC or 2C Reverse Polarity Protection Ω m C/0... C 13K Performance Characteristics Operating Time (response time) Rated Insulation oltage Dielectric strength On Off Input to Output Terminals to Chassis ms ms Environment Product certifications mbient air temperature around the device Degree of protection Standard version Storage Operation C C - 0 Miscellaneous Characteristics Thermal Resistance (Junction to Case) Weight LED Input Terminals Output Terminals Mounting Screw Torque Input C/W g (oz) Nm (3.5) 4/ Magnecraft Solution Guide 5

4 Thermal Pad (SSR-TP-1) Section 3 p.21 Heat Sink (SSR-HS-1) Section 3 p. 62XXSZS-C90 62SX C C C XXSZS-C90 60SX C C 1. C 10 62XXSZS-C90 62SX C C 1. C 00 62XXSZS-DC3 62DSX C C C 3 62XXSZS-DC3 62DSX C C C C/0... C 13K 90 C/0 C 13K 90 C/0 C 13K (3.5) (4.) (7.1) 3. 0 (3.5) 2 0 (3.5) Magnecraft Solution Guide 5 4/21

5 Class 6 Solid State Relays/, SPST-NC,, -1 mp Rating continued UL Recognized File No. E297 LED Status Lamp Internal Snubber Solid State Circuitry. No Moving Parts Panel Mounting General Specifications (@ C) Output Characteristics Number and type of Contacts Switching Device Current rating Switching voltage Switching Type Maximum Rate of Rise Off State oltage (dv/dt) Incandescent Lamp mpere Rating (rms) Motor Load Rating (rms) Min. Load current to maintain on Non-Repetitive Surge Current (1 cycle) Max. RMS overload current (1 second) Max. Off state leakage current (rms) Peak Blocking oltage Typical On State oltage Drop (rms) Max. On State oltage Drop (rms) Maximum I² T for Fusing (²) (UL ) Superceding Part # Units /us m m pk 60XXSZS-DC3 60DSX C XXSZS-DC3 62DSX C Input Characteristics oltage Range Must Release oltage Nominal Input Impedance Typical Input 5DC or 2C Reverse Polarity Protection Ω m Performance Characteristics Operating Time (response time) Rated Insulation oltage Dielectric strength On Off Input to Output Terminals to Chassis ms ms Environment Product certifications mbient air temperature around the device Degree of protection Standard version Storage Operation C C Miscellaneous Characteristics Thermal Resistance (Junction to Case) Weight LED Input Terminals Output Terminals Mouniting Screw Torque Input C/W g (oz) Nm (4.) (7.1) 4/22 Magnecraft Solution Guide 5

6 Thermal Pad (SSR-TP-1) Section 3 p.21 Heat Sink (SSR-HS-1) Section 3 p. 62XXTZS-DC3 62DTX-1 Triac 24. C BXXTZB-DC3* 64DTX-3* lternistor 4.40 C XXMDS-DC3 6212DDX-1 MOSFET DC DC Switching XXMDS-DC3 62DDX-1 MOSFET 3.0 DC DC Switching XXMDS-DC3 62DDX-1 MOSFET 3.0 DC DC Switching K K No 1K No 1K No 300 µs 1 00 C µs C µs C (3.5) 1. 0 (3.5) 0.17 QC 0.0 QC 6 1 (3.9) (4.) (4.) *Blade Terminal Magnecraft Solution Guide 5 4/23

7 Class 6 Solid State Relays/, SPST-NC,, -1 mp Rating continued WHITE Screw Terminals 2.2 (57.91) 0.66 (.76) Screw Terminals *Finger-safe safety cover is available for products up to mps. 0.6 (15.12) 2.2 (57.91) 0.66 (.76) 0.1 (4.44) Screw Terminals 1.74 (44.14) 0.1 (4.44) 0.6 (15.12) 1.74 (44.14) 1.4 (35.9) 1.7 (47.5) 1.4 (35.9) 2.2 (57.91) 1.7 (47.5) 0.1 (4.44) 2.2 (57.91) 1.74 (44.14) 0.1 (4.44) 1.74 (44.14) 1.7 (47.5) INPUT POWER SUPPLY INPUT - - SSR INPUT POWER SUPPLY OUTPUT WIRING DIGRM - 4/ (47.5) LOD INPUT SSR C INPUT LOD OUTPUT C INPUT Magnecraft Solution Guide 5

8 Heat Sink/Class 6 SSR Relay Thermal management is a fundamental consideration in the design and use of Solid State Relays (SSRs) because of the contact dissipation (typically 1 W per amp). It is, therefore, vital that sufficient heat sinking is provided, or the life and switching reliability of the SSR will be compromised. The unique design of the Magnecraft aluminum heat sink maximizes heat dissipation. This heat sink is available for Magnecraft s panel mount SSRs and ensures reliable operation when properly selected for the specific application. For ease of installation, all mounting holes are pre-drilled and tapped. Optional Thermal Pad (SSR-TP-1) See Section 3 p.21 Optional Heat Sink (SSR-HS-1) See Section 3 p. User Guide: The Magnecraft SSR should be firmly mounted on a clean, smooth heat sink surface using thermally conductive or suitable thermal transfer pads. The Magnecraft heat sink matches heat dissipation requirements for Magnecraft 6 Series SSRs; up to amps. The Magnecraft heat sink design achieves outstanding thermal efficiency. The Magnecraft heat sink is pre-drilled and tapped to suit the Magnecraft SSR 6 Series hockey puck style range ºC/W () 1.5 ºC/W HET SINK 0.14 ºC/W 0.14 ºC/W * Magnecraft Solution Guide 5 * De-rating curve without fan. 4/

9 Class 6 Solid State Relays/, SPST-NC,, -1 mp Rating continued UL Recognized File No. E297 LED Status Lamp Internal Snubber Solid State Circuitry. No Moving Parts Panel Mounting Standard Part Numbers BOLD-FCED PRT NUMBERS RE NORMLLY STOCKED C Operated, DUL MRKED Input oltage Range Output oltage Range Contact Configuration Switching Type Rated Current Load (mps) 62XXSZS-C90 62XXSZS-C90 62XXSZS-C90 60XXSZS-C90** 62XXSZS-C90** 64XXSZS-C90 64XXSZS-C90 64XXSZS-C90 64XXSZS-C90** 64XXSZS-C90** 6690XXSZS-C90** 661XXSZS-C90** Supercedes W62SX-1 W62SX-1 W62SX-1 W60SX-1 W62SX-1 W64SX-1 W64SX-1 W64SX-1 W64SX-1 W64SX-1 W6690SX-1 W661SX C 90. C 90. C 90. C 90. C 90. C 90. C 90. C 90. C 90. C 90. C 90. C SCR Output 4.40 C 4.40 C 4.40 C 4.40 C 4.40 C 4. C 4. C 90 1 DC Operated, DUL MRKED 62XXSZS-DC3 62XXSZS-DC3 62XXSZS-DC3 60XXSZS-DC3** 62XXSZS-DC3** 64XXSZS-DC3 64XXSZS-DC3 64XXSZS-DC3 64XXSZS-DC3** 64XXSZS-DC3** 6690XXSZS-DC3** 661XXSZS-DC3** Supercedes W62DSX-1 W62DSX-1 W62DSX-1 W60DSX-1 W62DSX-1 W64DSX-1 W64DSX-1 W64DSX-1 W64DSX-1 W64DSX-1 W6690DSX-1 W661DSX C 4.40 C 4.40 C 4.40 C 4.40 C 4. C 4. C 90 1 DC Operated, DUL MRKED 62XXTZS-DC3 62XXTZS-DC3 62XXTZS-DC3 62BXXTZB-DC3 62XXTRS-DC3 62XXTRS-DC3 62XXTRS-DC3 64XXTZS-DC3 64XXTZS-DC3 64XXTZS-DC3 Supercedes W62DTX-1 W62DTX-1 W62DTX-1 W62DTX-3 W62DTX-4 W62DTX-4 W62DTX-4 W64DTX-1 W64DTX-1 W64DTX-1 TRIC Output 4.40 C 4.40 C 4.40 C SPST-NC SPST-NC SPST-NC DC Operated, DUL MRKED 6312XXMDS-DC3 63XXMDS-DC3** 63XXMDS-DC3** Supercedes W6212DDX-1 W62DDX-1 W62DDX-1 MOSFET Output 3.0 DC 3.0 DC 3.0 DC 12 **Only Legacy (superceding) part is currently available. 4/26 Magnecraft Solution Guide 5