Basic Series. Photoelectric Sensors. 18mm Diameter Cylindrical Style Sensors. Photoelectric Basic Series 18mm Diameter Style PEPPERL+FUCHS 613

Size: px

Start display at page:

Download "Basic Series. Photoelectric Sensors. 18mm Diameter Cylindrical Style Sensors. Photoelectric Basic Series 18mm Diameter Style PEPPERL+FUCHS 613"

Marcia Black
6 years ago
Views:

1 Diffused Mode with Background Suppression 14 Features: Adjustable focal points Sharp sensing range cut-off Sensing Range: mm Outputs: NPN, PNP Retro-Reflective Mode 17 Features: Light on/dark on mode determined by wiring Polarized filters detect shiny targets Sensing Range: 4m Outputs: NPN, PNP Basic Series 18mm Diameter Cylindrical Style Sensors Up to 5% longer sensing ranges than previous versions Housing lengths as short as 6mm (2 3/8 ) Cost-effective, compact sensor in a rugged metal housing Diffused Mode See pages Features: Light on/dark on mode determined by wiring Adjustable sensitivity Sensing Ranges: 2mm, 5mm Outputs: NPN, PNP Thru-Beam Mode See pages Features: Laser model has 1.5mm diameter light spot Light on/dark on mode determined by wiring Sensing Range: m Outputs: NPN, PNP Fiber Optic Diffused and Thru-Beam Mode 2 Features: Light on/dark on mode determined by wiring Wide selection of mating fiber optic heads and lengths Sensing Range: Determined by fiber optic cable Outputs: NPN, PNP for Basic Series 18mm diameter wiring and dimensions. PEPPERL+FUCHS 613

Diffused Mode with Background Suppression Specifications SENSITIVITY ADJUSTMENT GRAY/WHITE DIFFERENTIAL* MODEL NUMBER(S) OUTPUT: Transistor, Normally Open and Normally Closed LOAD CURRENT LEAKAGE

2 Diffused Mode with Background Suppression Specifications SENSITIVITY ADJUSTMENT GRAY/WHITE DIFFERENTIAL* MODEL NUMBER(S) OUTPUT: Transistor, Normally Open and Normally Closed LOAD CURRENT LEAKAGE CURRENT -A -A2 VOLTAGE DROP SHORT CIRCUIT AND OVERLOAD PROTECTION REVERSE POLARITY PROTECTION SUPPLY VOLTAGE VOLTAGE RIPPLE LED(s) CURRENT CONSUMPTION RESPONSE TIME READINESS DELAY HYSTERESIS SWITCHING FREQUENCY ELECTROMAGNETIC COMPATIBILITY COMPLIANCE PROTECTION (IEC) 3-mm (3-mm) mm white test card 13% OCH-18GM7-A-V1 OCH-18GM7-A2-V1 2 NPN 2 PNP ma ma. µa 2.5VDC -3VDC % (1) 4mA Light on/dark on.5ms ms 6% (for 18% gray test card) 1kHz IP65 Actual detection distance X [mm] Sensing Characteristics Effect of Target Color on Sensing Distance white 9% gray 18% black 6% OCH-18GM7 Adjusted detection distance X [mm] LIGHT SOURCE Visible red LED 66nm AMBIENT LIGHT RESISTANCE, lu TEMPERATURE RANGE WORKING STORAGE -13ºF to +131ºF -22ºF to +158ºF HOUSING MATERIAL LENS Glass WEIGHT 2.8oz APPROVALS LISTED CERTIFIED Quick disconnect type V1 See pages *Difference in sensing range between 9% white test card and 18% gray test card 614 PEPPERL+FUCHS

3 Diffused Mode Specifications SENSITIVITY ADJUSTMENT MODEL NUMBER(S) OUTPUT: Transistor, Normally Open or Normally Closed LOAD CURRENT -E4 -E5 y VOLTAGE DROP SHORT CIRCUIT AND OVERLOAD PROTECTION REVERSE POLARITY PROTECTION SUPPLY VOLTAGE VOLTAGE RIPPLE LED(s) CURRENT CONSUMPTION RESPONSE TIME READINESS DELAY HYSTERESIS SWITCHING FREQUENCY ELECTROMAGNETIC COMPATIBILITY COMPLIANCE PROTECTION (IEC) LIGHT SOURCE 14-2mm (14-2mm) 2 2mm white test card OBT2-18GM6-E4 OBT2-18GM6-E5 NPN PNP ma 2.5VDC -3VDC % (2) 3mA Light on/dark on 1.ms 25ms <15% 5Hz Infrared LED 88nm 14-2mm (14-2mm) 2 2mm white test card OBT2-18GM6-E4-V1 OBT2-18GM6-E5-V1 NPN PNP ma 2.5VDC -3VDC % (2) 3mA Light on/dark on 1.ms 25ms <15% 5Hz Infrared LED 88nm Ecess Gain Offset Y [mm] Sensing Characteristics Ecess Gain vs. Sensing Range OBT2-18GM6 Movement Characteristics Distance X [mm] Distance X [mm] OBT2-18GM6 white 9% black 6% AMBIENT LIGHT RESISTANCE, lu, lu TEMPERATURE RANGE WORKING STORAGE -13ºF to +131ºF -4ºF to +158ºF -13ºF to +131ºF -4ºF to +158ºF HOUSING MATERIAL LENS Polycarbonate Polycarbonate WEIGHT 4.3oz 2.1oz APPROVALS LISTED CERTIFIED 2-meter cable, PVC covered 4-conductor, #22AWG See pages Quick disconnect type V1 PEPPERL+FUCHS 615

4 Diffused Mode Specifications SENSITIVITY ADJUSTMENT MODEL NUMBER(S) OUTPUT: Transistor, Normally Open or Normally Closed LOAD CURRENT -E4 -E5 VOLTAGE DROP SHORT CIRCUIT AND OVERLOAD PROTECTION REVERSE POLARITY PROTECTION SUPPLY VOLTAGE y VOLTAGE RIPPLE LED(s) CURRENT CONSUMPTION RESPONSE TIME READINESS DELAY HYSTERESIS SWITCHING FREQUENCY ELECTROMAGNETIC COMPATIBILITY COMPLIANCE PROTECTION (IEC) LIGHT SOURCE 14-5mm (14-5mm) 2 2mm white test card OBT5-18GM6-E4 OBT5-18GM6-E5 NPN PNP ma ma. 2.5VDC -3VDC % (2) 3mA Light on/dark on 1.ms 25ms <15% 5Hz Infrared LED 88nm 14-5mm (14-5mm) 2 2mm white test card OBT5-18GM6-E4-V1 OBT5-18GM6-E5-V1 NPN PNP ma ma. 2.5VDC -3VDC % (2) 3mA Light on/dark on 1.ms 25ms <15% 5Hz Infrared LED 88nm Ecess Gain Offset Y [mm] Sensing Characteristics Ecess Gain vs. Sensing Range OBT5-18GM Movement Characteristics Distance X [mm] Distance X [mm] OBT5-18GM6 white 9% black 6% AMBIENT LIGHT RESISTANCE, lu, lu TEMPERATURE RANGE WORKING STORAGE -13ºF to +131ºF -4ºF to +158ºF -13ºF to +131ºF -4ºF to +158ºF HOUSING MATERIAL LENS Polycarbonate Polycarbonate WEIGHT 4.3oz 2.1oz APPROVALS LISTED CERTIFIED 2-meter cable, PVC covered 4-conductor, #22AWG See pages Quick disconnect type V1 616 PEPPERL+FUCHS

5 Retro-Reflective Mode Specifications SENSITIVITY ADJUSTMENT POLARIZED FILTER MODEL NUMBER(S) OUTPUT: Transistor, Normally Open or Normally Closed LOAD CURRENT -E4 -E5 VOLTAGE DROP SHORT CIRCUIT AND OVERLOAD PROTECTION REVERSE POLARITY PROTECTION SUPPLY VOLTAGE VOLTAGE RIPPLE LED(s) CURRENT CONSUMPTION RESPONSE TIME READINESS DELAY HYSTERESIS SWITCHING FREQUENCY ELECTROMAGNETIC COMPATIBILITY COMPLIANCE PROTECTION (IEC) LIGHT SOURCE -4m H5 reflector OBS4-18GM6-E4 OBS4-18GM6-E5 NPN PNP ma ma. 2.5VDC -3VDC % (2) 25mA Light on/dark on 1.ms 25ms <15% 5Hz Visible red LED 66nm -4m H5 reflector OBS4-18GM6-E4-V1 OBS4-18GM6-E5-V1 NPN PNP ma ma. 2.5VDC -3VDC % (2) 25mA Light on/dark on 1.ms 25ms <15% 5Hz Visible red LED 66nm AMBIENT LIGHT RESISTANCE, lu, lu TEMPERATURE RANGE WORKING STORAGE -13ºF to +131ºF -4ºF to +158ºF -13ºF to +131ºF -4ºF to +158ºF HOUSING MATERIAL LENS PMMA PMMA WEIGHT 4.3oz 2.1oz APPROVALS LISTED CERTIFIED 2-meter cable, PVC covered 4-conductor, #22AWG See pages Quick disconnect type V1 PEPPERL+FUCHS 617

6 Thru-Beam Mode Specifications SENSITIVITY ADJUSTMENT MODEL NUMBER(S) OUTPUT: Transistor, Normally Open or Normally Closed LOAD CURRENT -SE4 -SE5 VOLTAGE DROP SHORT CIRCUIT AND OVERLOAD PROTECTION REVERSE POLARITY PROTECTION SUPPLY VOLTAGE VOLTAGE RIPPLE LED(s) CURRENT CONSUMPTION RESPONSE TIME READINESS DELAY HYSTERESIS SWITCHING FREQUENCY ELECTROMAGNETIC COMPATIBILITY COMPLIANCE PROTECTION (IEC) LIGHT SOURCE -m Receiver OBEM-18GM6-SE4 OBEM-18GM6-SE5 NPN PNP ma ma. 2.5VDC -3VDC % (2) 25mA Light on/dark on 1.5ms 25ms <15% 3Hz Infrared LED 88nm -m Receiver OBEM-18GM6-SE4-V1 OBEM-18GM6-SE5-V1 NPN PNP ma ma. 2.5VDC -3VDC % (2) 25mA Light on/dark on 1.5ms 25ms <15% 3Hz Infrared LED 88nm AMBIENT LIGHT RESISTANCE, lu, lu TEMPERATURE RANGE WORKING STORAGE -13ºF to +131ºF -4ºF to +158ºF -13ºF to +131ºF -4ºF to +158ºF HOUSING MATERIAL LENS Polycarbonate Polycarbonate WEIGHT 4.3oz (per housing) 2.1oz (per housing) APPROVALS LISTED CERTIFIED 2-meter cable, PVC covered 2/4-conductor, #22AWG See pages Quick disconnect type V1 618 PEPPERL+FUCHS

Thru-Beam Mode Specifications SENSITIVITY ADJUSTMENT SENSING HEAD MODEL NUMBER(S) OUTPUT: Transistor, Normally Closed /32 LOAD CURRENT SHORT CIRCUIT AND OVERLOAD PROTECTION REVERSE POLARITY

7 Thru-Beam Mode Specifications SENSITIVITY ADJUSTMENT SENSING HEAD MODEL NUMBER(S) OUTPUT: Transistor, Normally Closed /32 LOAD CURRENT SHORT CIRCUIT AND OVERLOAD PROTECTION REVERSE POLARITY PROTECTION SUPPLY VOLTAGE VOLTAGE RIPPLE LED(s) CURRENT CONSUMPTION RESPONSE TIME SWITCHING FREQUENCY ELECTROMAGNETIC COMPATIBILITY COMPLIANCE PROTECTION (IEC) LIGHT SPOT DIAMETER LIGHT BEAM ANGLE LIGHT SOURCE Laser -m No Receiver Straight E18-LAS/EV18-LAS/25/32/76a/92 PNP 2mA ma. -3VDC % (1) 25mA transmitter 6mA receiver Light on.5ms 1kHz IP65 <1.5mm at a range of 1.5m (1.2mm min. target diameter) ±2º receiver Visible red laser Ecess Gain Offset Y [mm] Sensing Characteristics Ecess Gain vs. Sensing Range E18-LAS/EV18-LAS Distance X [m] Movement Characteristics 5 15 Distance X [m] y E18-LAS/EV18-LAS 2 AMBIENT LIGHT RESISTANCE, lu TEMPERATURE RANGE WORKING STORAGE +32ºF to +14ºF -4ºF to +185ºF HOUSING MATERIAL LENS Glass WEIGHT 1.6oz (per housing) APPROVALS LISTED CERTIFIED Quick disconnect type V1 See pages PEPPERL+FUCHS 619

8 Diffused and Thru-Beam Mode Fiber Optic Sensors Specifications SENSITIVITY ADJUSTMENT MODEL NUMBER(S) OUTPUT: Transistor, Normally Open or Normally Closed LOAD CURRENT -E4 -E5 VOLTAGE DROP SHORT CIRCUIT AND OVERLOAD PROTECTION REVERSE POLARITY PROTECTION SUPPLY VOLTAGE VOLTAGE RIPPLE LED(s) CURRENT CONSUMPTION RESPONSE TIME READINESS DELAY HYSTERESIS SWITCHING FREQUENCY ELECTROMAGNETIC COMPATIBILITY COMPLIANCE PROTECTION (IEC) LIGHT SOURCE AMBIENT LIGHT RESISTANCE Determined by cable* OBT2L-18GM7-E4 OBT2L-18GM7-E5 NPN PNP ma ma. 2.5VDC -3VDC % (1) 2mA Light on/dark on 1.5ms 5ms % 3Hz Infrared LED 94nm, lu Determined by cable* OBT2L-18GM7-E4-V1 OBT2L-18GM7-E5-V1 NPN PNP ma ma. 2.5VDC -3VDC % (1) 2mA Light on/dark on 1.5ms 5ms % 3Hz Infrared LED 94nm, lu Attaching Fiber Optic Cable 1. Position mounting plate on sensor so that alignment tabs fit into lens holes. 2. With fiber optic cable pulled through metal capnut opening, position cable on mounting plate. 3. Hand tighten metal capnut on sensor. TEMPERATURE RANGE WORKING STORAGE -13ºF to +131ºF -4ºF to +158ºF -13ºF to +131ºF -4ºF to +158ºF HOUSING MATERIAL LENS PMMA PMMA WEIGHT 6.9oz 2.8oz APPROVALS LISTED CERTIFIED 2-meter cable, PVC covered 3-conductor, #22AWG See pages Quick disconnect type V1 *See pages for glass fiber optic lengths and specifications. 62 PEPPERL+FUCHS

9 Wiring Diagrams DC OB...-18GM6 Cable Connection E4 White White Wire: Control Input Transmitter (thru-beam models) E4 E5 E4 White ( ) White Wire: Control Input E5 White White Wire: Control Input E5 White White Wire: Control Input OBT2L-18GM7 E4 E5 E4 V1 Type OB...-18GM6 E4 1 2 White 4 3 Quick Disconnect Note: Wiring diagrams show quick disconnect pin numbers. PIN 2: Control Input E4 1 2 White 4 3 PIN 2: Control Input E5 1 2 White 4 PIN 2: Control Input 3 E5 1 2 White 4 3 PIN 2: Control Input Transmitter (thru-beam models) E4 1 E5 3 E18-LAS/EV18-LAS Male Receptacle End View Transmitter (thru-beam models) /32/76a 1 2 White Control Input* 3 ( ) White White White White Male Receptacle End View /32/76a 1 2 White Weak Weak Signal Signal 4 White 3 ( ) Weak Signal Ouput: Output is on for weak signal White *Control Input: transmitter active: -3VDC or unwired transmitter inactive: 5VDC-V Control Input* OBT2L-18GM7 E4 E5 A A E E OCH-18GM7 / 1 L.O. 4 2 White 3 / White D.O. 3 D.O. L.O. Male Receptacle End View L.O. Male Receptacle End View White L.O. White D.O. D.O. E5 PEPPERL+FUCHS 621

10 Dimensions (mm) OCH-18GM7 Optical ais 8.2 OB...-18GM OB...-18GM6...-V Sensitivity adjustment LED Yellow: Output Status M121 Sensitivity adjustment (not available on transmitter of thru-beam models) LEDs Yellow: Output Status (not available on transmitter of thru-beam models) Green: Power Yellow/Green (flashing alternately at 2 Hz): Weak Signal (not available on transmitter of thru-beam models) Sensitivity adjustment (not available on transmitter of thru-beam models) M LEDs Yellow: Output Status (not available on transmitter of thru-beam models) Green: Power Yellow/Green (flashing alternately at 2 Hz): Weak Signal (not available on transmitter of thru-beam models) 622 PEPPERL+FUCHS

11 Dimensions (mm) E18-LAS/EV18-LAS ø16.5 Transmitter 31± ±.3 OBT2L-18GM7 19 ø Light outlet ø 1 mm Light entry Sensitivity adjustment ø12 LED Yellow: Output Status Receiver Locknuts 8±.3 LED Yellow: Output Status Yellow (flashing): Weak Signal 28 M121 OBT2L-18GM7...-V Sensitivity adjustment LED Yellow: Output Status ø2 9 M PEPPERL+FUCHS 623

12 Accessories (Dimensions in mm) Adjustable Mounting Bracket Model BF18 Right Angle Mounting Bracket Model AB Universal Mounting Bracket Model BF Fiber Adapter Set Model OLA18 (for connecting fiber optic cable to OBT2L-18GM7 series) Ø 14 Ø 12 Ø 8 Ø 5 Ø 3 Ø º Optical Deflector Model OSP18A (open front) 9º Optical Deflector Model OSP18B (closed front for infrared retro-reflective and thru-beam modes only) 3.2 mounting plate cap nut See pages for cordsets See pages additional accessories for photoelectric sensors 624 PEPPERL+FUCHS

13 Diffused Mode See pages Sensing Ranges: mm, 2mm, 4mm Outputs: NPN, PNP, thyristor Thru-Beam Mode 7 Sensing Range: 3m Outputs: NPN, PNP, thyristor CP18 Series 18mm Diameter Cylindrical Style Sensors Unique, one-piece polycarbonate lens/housing Cost effective Quick disconnect receptacle or cable verions DC and AC/DC models Retro-Reflective Mode 6 Sensing Ranges: 1.5m, 4m Outputs: NPN, PNP, thyristor Photoelectric CP18 Series 18mm Diameter Style for CP18 Series specifications, wiring and dimensions. PEPPERL+FUCHS 63

14 Diffused Mode Photoelectric CP18 Series 18mm Diameter Style DC (PNP) MODEL NUMBER(S) DC (NPN) AC/DC DC (PNP) MODEL NUMBER(S) DC (NPN) AC/DC mm mm white test card 2-meter cable,pvc covered Quick disconnect 3-conductor, #22AWG type V1 (DC) or V124 (AC) Light on Dark on Light on Dark on CP18D1DPL2 CP18D1DPD2 CP18D1DPLC CP18D1DPDC CP18D1DNL2 CP18D1DND2 CP18D1DNLC CP18D1DNDC CP18D1BAL2 CP18D1BAD2 CP18D1BALC CP18D1BADC See pages mm mm white test card 2-meter cable,pvc covered Quick disconnect 3-conductor, #22AWG type V1 (DC) or V124 (AC) Light on Dark on Light on Dark on CP18D2DPL2 CP18D2DPD2 CP18D2DPLC CP18D2DPDC CP18D2DNL2 CP18D2DND2 CP18D2DNLC CP18D2DNDC CP18D2BAL2 CP18D2BAD2 CP18D2BALC CP18D2BADC See pages mm mm white test card DC (PNP) MODEL NUMBER(S) DC (NPN) AC/DC 2-meter cable,pvc covered Quick disconnect 3-conductor, #22AWG type V1 (DC) or V124 (AC) Light on Dark on Light on Dark on CP18D4DPL2 CP18D4DPD2 CP18D4DPLC CP18D4DPDC CP18D4DNL2 CP18D4DND2 CP18D4DNLC CP18D4DNDC CP18D4BAL2 CP18D4BAD2 CP18D4BALC CP18D4BADC See pages PEPPERL+FUCHS

15 Diffused Mode Sensing Characteristics Ecess Gain Ecess Gain Ecess Gain vs. Sensing Range Distance X [mm] CP18D Offset Y [mm] Movement Characteristics Distance X [mm] y CP18D1 Ecess Gain vs. Sensing Range CP18D2 Movement Characteristics CP18D Distance X [mm] Distance X [mm] Offset Y [mm] y Photoelectric CP18 Series 18mm Diameter Style Ecess Gain Ecess Gain vs. Sensing Range CP18D Distance X [mm] Offset Y [mm] Movement Characteristics Distance X [mm] y CP18D4 PEPPERL+FUCHS 65

16 y y Photoelectric Sensors Retro-Reflective Mode Photoelectric CP18 Series 18mm Diameter Style POLARIZED FILTER MODEL NUMBER(S) POLARIZED FILTER Sensing Characteristics DC (PNP) DC (NPN) AC/DC MODEL NUMBER(S) DC (PNP) DC (NPN) AC/DC Ecess Gain 3 2 Ecess Gain vs. Sensing Range CP18P meter cable,pvc covered 3-conductor, #22AWG Distance X [m] 1.5m FE-RR1 reflector Offset Y [mm] Quick disconnect type V1 (DC) or V124 (AC) Light on Dark on Light on Dark on CP18PDPL2 CP18PDPD2 CP18PDPLC CP18PDPDC CP18PDNL2 CP18PDND2 CP18PDNLC CP18PDNDC 2-meter cable,pvc covered 3-conductor, #22AWG See pages m FE-RR1 reflector No Quick disconnect type V1 (DC) or V124 (AC) Light on Dark on Light on Dark on CP18LDPL2 CP18LDPD2 CP18LDPLC CP18LDPDC CP18LDNL2 CP18LDND2 CP18LDNLC CP18LDNDC CP18LBAL2 CP18LBAD2 CP18LBALC CP18LBADC See pages Movement Characteristics CP18P Distance X [m] Ecess Gain Ecess Gain vs. Sensing Range CP18L Distance X [m] Offset Y [mm] Movement Characteristics CP18L Distance X [m] 66 PEPPERL+FUCHS

17 Thru-Beam Mode POLARIZED FILTER RECEIVER DC (PNP) MODEL NUMBER(S) DC (NPN) AC/DC TRANSMITTER MODEL NUMBER(S) DC AC/DC Sensing Characteristics Ecess Gain 1 2-meter cable,pvc covered 3-conductor, #22AWG 3m Receiver No Quick disconnect type V1 (DC) or V124 (AC) Light on Dark on Light on Dark on CP18RDPL2 CP18RDPD2 CP18RDPLC CP18RDPDC CP18RDNL2 CP18RDND2 CP18RDNLC CP18RDNDC CP18RBAL2 CP18RBAD2 CP18RBALC CP18RBADC CP18EDX2 (use with DC receivers) CP18EBX2 (use with AC/DC receivers) Ecess Gain vs. Sensing Range CP18R 3 3 Distance X [m] 3 See pages CP18EDXC (use with DC receivers) CP18EBXC (use with AC/DC receivers) Distance X [m] Photoelectric CP18 Series 18mm Diameter Style y Offset Y [mm] Movement Characteristics CP18R PEPPERL+FUCHS 67

18 Series Specifications Photoelectric CP18 Series 18mm Diameter Style CP18 Series Specifications OUTPUT TYPE SUPPLY VOLTAGE LOAD CURRENT LEAKAGE CURRENT VOLTAGE DROP SHORT CIRCUIT AND OVERLOAD PROTECTION REVERSE POLARITY PROTECTION LED(s) CURRENT CONSUMPTION RESPONSE TIME READINESS DELAY SWITCHING FREQUENCY ELECTROMAGNETIC COMPATIBILITY COMPLIANCE PROTECTION (IEC) LIGHT SOURCE TEMPERATURE RANGE WORKING HOUSING MATERIAL LENS APPROVALS LISTED CERTIFIED STORAGE DC Models Transistor (open collector) -3VDC 15mA ma. µa 1VDC (1) 2mA 1ms ms 5Hz Infrared LED -22ºF to +14ºF -67ºF to +185ºF Polycarbonate Polycarbonate AC/DC Models Thyristor 2-26VAC or 12-26VDC 3mA ma. 1mA 5V No No (1) 4mA ms ms 5Hz Infrared LED -22ºF to +14ºF -67ºF to +185ºF Polycarbonate Polycarbonate 68 PEPPERL+FUCHS

19 Wiring Diagrams DC PL2 NL2 PD2 ND2 DX2 AC/DC AL2 AD2 Cable Connection Transmitter (thru-beam models) Cable Connection Transmitter (thru-beam models) BX2 L1 L2 L1 L2 L1 L2 V1 Type PLC NLC PDC NDC DXC V124 Type Quick Disconnect Note: Wiring diagrams show quick disconnect pin numbers Transmitter (thru-beam models) 1 3 Male Receptacle End View Quick Disconnect Note: Wiring diagrams show quick disconnect pin numbers. ( ) Male Receptacle End View ALC 1 Red/ L1 1 Red/ L1 3 Red 2 4 Red 2 Red/White 3 L2( ) Red/White L2( ) ADC 1 Red/ L1 1 Red/ L1 3 Red 2 4 Red 2 Red/White 3 L2( ) Red/White L2( ) BXC Transmitter (thru-beam models) 1 Red/ 2 Red/White L1 L Red/ Red/White L1 L2 Photoelectric CP18 Series 18mm Diameter Style PEPPERL+FUCHS 69

20 Dimensions (mm) Photoelectric CP18 Series 18mm Diameter Style CP18...BAL2 CP18...BAD2 CP18PDPL2 CP18PDNL2 CP18PDPD2 CP18PDND LED Red: output status LED Red: output status CP18D...DPL2 CP18LDPL2 CP18RDPL2 CP18EDX2 CP18D...DNL2 CP18LDNL2 CP18RDNL2 CP18EBX2 CP18D...DPD2 CP18LDPD2 CP18RDPD2 CP18D...DND2 CP18LDND2 CP18RDND2 CP18...BALC CP18...BADC CP18PDPLC CP18PDNLC CP18PDPDC CP18PDNDC LED Red: output status 1/2"-2 LED Red: output status 1/2"-2 CP18D...DPLC CP18LDPLC CP18RDPLC CP18EDXC CP18D...DNLC CP18LDNLC CP18RDNLC CP18EBXC CP18D...DPDC CP18LDPDC CP18RDPDC CP18D...DNDC CP18LDNDC CP18RDNDC LED Red: output status 22 LED Red: output status M PEPPERL+FUCHS

21 Accessories Swivel Bracket Assembly Model CPZ18B2BK Right angle adapter (not included) 18mm cylindrical photoelectric sensor (not included) Swivel nut Steel bracket Steel bracket 2X screw -32 UNF 63.5 on 5.8 centers 2X bracket assembled 18mm henut (not included) Flush Mount/Quick Assembly Bracket Model CPZ18B1 Reference wall ma. thickness 14mm Label CP18 photoelectric sensor (not included) Push-on locking ring X screw -32 UNF 12.7 Mounting hole 21.34mm min. O-ring Recessed arrow head Adapter Swivel Bracket Model CPZ18B3 2X lock nut Right angle adapter (not included) 18mm cylindrical photoelectric sensor (not included) Swivel nut 18mm henut (not included) 2X bracket 2X screw -32 UNF 76.2 on 5.8 centers Photoelectric CP18 Series 18mm Diameter Style Screw On Right Angle Adapters Right Angle Mounting Bracket Model AB Model No. CPZ18RAW CPZ18RAO CPZ18RAP Description for non-polarized retro-reflective and thru-beam for diffused for polarized retro-reflective PEPPERL+FUCHS 611

22 Accessories Aperture Hood Model CPZ18A1 for Precise Sensing (sold individually) Mounting Nut Model CPZ18BKNTS (sold in pairs) Photoelectric CP18 Series 18mm Diameter Style M18-1/2 NPT Conduit Adapter See pages for cordsets See pages additional accessories for photoelectric sensors 612 PEPPERL+FUCHS

Basic Series 18 mm Diameter Cylindrical Sensors

Basic Series 18 mm Diameter Cylindrical Sensors Diffuse Mode See pages 384-385 Features: Light on/dark on mode determined by wiring Adjustable sensitivity Sensing Ranges: 2 mm, 5 mm Outputs: NPN, PNP Thru-Beam Mode See pages 387-388 Features: Laser