Multi-axis controller V 8 / VV 8
|
|
- Francis McKenzie
- 6 years ago
- Views:
Transcription
1 Multi-axis controller V 8 / VV 8 /30 03 The multi-axis controller V 8 is a rugged switching device according IEC/EN for electro-hydraulic applications.the modular design enables the switching device to be used universally. The V 8 is resistant to oil, maritime climate, ozone and UV radiation. Contact complement 0,5 A 0 V AC 5 or,5 A 4 V DC 3 I min > 0, ma V DC Gold plated for max. load of 0, Watt (standard) V8LB3DSRPA-ZP+ZP- Pos. V 8 V 8 Mechanical life V 8 0 million (operating cycles) Mechanical life VV 8 0 million (operating cycles) Permissible ambient temperature Operation -40 C to + C Climate resistance Storage -50 C to +80 C Damp heat constant IEC Damp heat cyclic IEC Degree of protection front IP 54 IEC/EN 59 Technical data see catalog 4/00 Description data see catalog 4/00 Spindle block with schematic representation of the master controller installation and deflection directions. Version shown for left-hand side installation (right-hand side installation is mirror image) Multi-axis controller left (dir. -, 3-4) 7. Multi-axis controller right (dir. 5-6, 7-8) 0 Gate cross-shaped (prohibits diagonal shifting) Gate special-shaped (e.g. H-gate) 0 Control-handle with knob solid Control-handle with latch for mechanical zero interlock. by lifting. by lifting, interlocking the gate.3 by lifting, interlocking in the joint bracket (only VV 8).4 by pushing down.5 Mechanical zero interlock with command devices see catalog /74 Control-handle with dead man s button NO 3 Control-handle with signal button NO 4 Control-handle with push button NO 5 Control-handle with flat push button NO 6 Control-handle with palm grip B 7 Control-handle with palm grip B with push button top NO 8 Control-handle long or short mm mm 9 More knobs, grips and T-grips with and without signal devices see catalog /70ff 30 Masterswitch (contact) switching sequence Direction - and 3-4 each masterswitch 33 Switching program according contact-arrangement MS... see catalog 4/00 34 or to your contact-arrangement 36 Switching sequence Spring return in 0-position (for each direction) 39 Friction brake adjustable, only with V8 (for each direction) Potentiometer e.t.c. each direction with mounted 40 Conductive-plastic potentiometer T 30, with centre tap linear 0,5 Watt wiper current max. ma resistance x k P8, x k P83, x 5k P84, x 0k P85 4 Prepared for mounting potentiometer shaft 6 mm adjusting-angle x 0 4 Prepared for mounting potentiometer e.t.c. adjusting-angle variable. 43 more Potentiometer e.t.c. see catalog /40ff 50 Cover housing 5 Filter plug M 0 for air-condition 5 Cable entry M 0 with anti-kink protection and strain relief 53 Plug in socket 4-pole female insert CPC 7 wired 54 Connector 4-pole male insert CPC 7 unwired 55 Wiring plug in socket or connector each wired-connection Indicating labels not engraved with or 4 arrows 6 Engraving, each 0 characters expansion A......P8 P left right 6 Deflection directions designated to DIN 5 No. of contacts 3 Weight gramm V 8 VV 8 V 8 VV 8 L R P PX M MP MP MN T H D DV B B T S5 S8 3 Z R P (P) (P) B 5 Price 8
2 Multi-axis controller V 8 / VV 8 /3 03 multi-axis controller installation side L o. R special control handle gate handle contact dir. - (5-6) spring return dir. - (5-6) Potentiometer dir. - (5-6) contact dir. 3-4 (7-8) V8 L S5 P B3K - 3 Z P + R P -B- -X- A050 P84 +A98 P8 Potentiometer description dir. 3-4 (7-8) see /40ff Arrangement dir. 3-4 (7-8) see 4/00 Potentiometer description dir. - (5-6) see /40ff Arrangement dir. - (5-6) see 4/00 special please describe housing Potentiometer dir. 3-4 (7-8) friction brake dir. 3-4 (7-8) 9
3 Industrieschaltgeräte Matching Electronic V8 / VV8 /3a 03 Pos. Gewicht Gramm Form Preis 0 Voltage output +0,5,5 4,5 Volt ANALOG Technical Data: Supply voltage 8-30 VDC* 3 Output characteristic linear mounting depth A (33 mm) 0 Voltage output Volt ANALOG Technical Data: Supply voltage 8-30 VDC* 3 Output characteristic linear mounting depth A (33 mm) electronic for axis electronic for 4 axis electronic for axis EP/5 EP/84 E0 E0 E03 E04 E03 E03 E Voltage output Volt ANALOG 3 Technical Data: 3 Supply voltage 8-30 VDC* 33 Output characteristic linear mounting depth A (33 mm) electronic for axis EP/84 E04 E04 E Voltage output ± 0Volt ANALOG 4 Technical Data: 4 Supply voltage 8-30 VDC* 43 Output characteristic linear mounting depth A (33 mm) electronic for axis EP/84 E05 E05 E053 output power ma ANALOG 6 Technical Data: 6 Supply voltage 8-30 VDC* 63 Output characteristic linear mounting depth A (33 mm) electronic for axis ER/6 E E E3 70 output power ma ANALOG 7 Technical Data: 7 Supply voltage 8-30 VDC* 73 Output characteristic linear mounting depth A (33 mm) electronic for axis ER/6 E E E3 80 output power ma ANALOG 8 Technical Data: 8 Supply voltage 8-30 VDC* 83 Output characteristic linear mounting depth A (33 mm) electronic for axis ER/6 E3 E3 E33 90 output power ma ANALOG 9 Technical Data: 9 Supply voltage 8-30 VDC* 93 Output characteristic linear mounting depth A (33 mm) electronic for axis ER/9 E4 E4 E43 00 output power ±0 ma ANALOG 0 Technical Data: 0 Supply voltage 8-30 VDC* 03 Output characteristic linear mounting depth A (33 mm) electronic for axis ER/44 E5 E5 E53 0 Potentiometer output for proportional valve PVG3ANALOG (0,75 0,5 0,75 Us) Technical Data: 3 Output characteristic linear mounting depth A (33 mm) for axis for axis for 3 axis for 4 axis E06 E06 E063 E064 0 Humidity protection (circuit board moulded) for use with high condensation *Other voltages on request 0
4 Matching Electronic with Profi-Bus Interface for potentiometer applications /3b 03 Pos. Weight gramm Price Profi-Bus DP interface (DIN 9 45 part 3) EB/85 EPB0 Technical data: Supply voltage 8-3 V DC distinctively poled Profi-Bus Baud rate max. MBit/s Address outside adjustable by rotary switch (default 99) potentiometer output value 0 / 8 / 55 or 55 / 0 / 55 Input 4 analog ports (4-axis) 6 digital ports for 4 x direction-contacts and for switches in the palm grip 6 digital externally ports for 6 switches Output 8 LED-outputs Connection Profi-Bus D-SUB 9 socket (female insert) + Connector -pole CAN-Bus interface (Protocol CAN open CiA DS 30, SAE J 939*) EB/0 ECB0 Technical data: Supply voltage 9-36 V DC distinctively poled CAN-Bus level: physical layer acc. ISO 898 Baud rate 5 kbit/s...mbit/s Bus-exclusion DIP switch hook up Identifier / CAN-open-ID adjustable by DIP switch Input 9 analog ports 6 digital ports for grip functions 3 digital externally ports for switches Output 8 digital externally ports for LED drive Connection D-SUB 9 socket protection IP 65 (male) CAN in + Connection D-SUB 9 socket protection IP 65 (female) CAN out *Protocol CAN open customer-specific after request
5 Electronic (Amplifier) ES/6 current controlled 0 Ampere /3c 03 Pos. for mounting on V 8 with potentiometer Weight gramm Price Elektronic (Amplifier) Technical data: Power supply 8 3 V DC Current controlled PWM 0 A per axis can be a characteristic curve deposited 50 EV0 Dither frequency or 00 Hz adjustable Ramp time adjustable or Current input 4 0 ma Current output A RS 3 interface with PC work parameter attitude and diagnosis Error journal for 4 errors with operating time active/inactively recognition Connector DT04-P / DT06-S 90 Humidity protection (circuit board moulded) for use with high condensation
6 Electronic (Amplifier) ES/6 Connections drawing /3d 03 ES/6-0 violet grey/pink black directions power supply: +8V +3V PWM-output: max A Frequency: /00 Hz ±0 Hz X: pol. DEUTSCH Connector type: DT04-P X: pol. DEUTSCH Connector type: DT06-S output lmax=a Ripper power supply white grey white grey green yellow brown red blue black violet green yellow brown red blue pink 3
Setting big things into motion. Industrial Controllers Catalog 2018
Setting big things into motion. Industrial Controllers Catalog 208 Product range Tool for Designers, Engineers and Purchasing Agents Your tool for finding industrial controllers for cranes, electro-hydraulic
More informationMulti-axis controller V25
The multi-axis controller is available in either single-axis or multi-axis options and is a robust controller used commonly in electro-hydraulic applications. With many output options including voltage,
More informationSetting big things into motion. Industrial Controllers Catalog 2015
Setting big things into motion. Industrial Controllers Catalog 205 Product range Tool for Designers, Engineers and Purchasing Agents Your tool for finding industrial controllers for cranes, electro-hydraulic
More informationRT300 Series Crane & Hoist Joystick. RunnTech. Potentiometer: ±32, Hall sensor: ±20
Electronics (Changzhou) Corp. RT00 Series Crane & Hoist Joystick RT00 Series Crane & Hoist Joystick Product Features Single axis or dual axis control; Pure silver contacts to ensure durable; Spring return
More informationRT02 Series Robust Industrial Joystick. RunnTech
Electronics (Changzhou) Corp. RT0 Series Robust Industrial Joystick RT0 Series Robust Industrial Joystick Product Features Potentiometer sensor or Hall sensor; Single axis, dual axis or axis control; Resistant
More informationValve terminal RE-10 with Multi-pin, AS-Interface or bus connection 4 12 valve stations, 300 Nl/min (0.305 Cv)
Type of connection = AS = B1 = B6 Order code RE-10/08-M-1-060 Series Number of stations Multi-pin: 4, 6, 8, 10, 12 Bus versions: 4, 8, 12 Electrical options M-1 = Multi-pin D-Sub plug AS3 = AS-Interface
More informationSection 2. Potentiometer HG 1 OEC 2 OEC 4 Electronic control unit MATRIX grip Hall-push button Palm grip Housing
Section Potentiometer HG 1 OEC OEC 4 Electronic control unit MATRIX grip Hall-push button Palm grip Housing Product range Potentiometer HG 1 OEC OEC 4 Electronic control unit MATRIX grip Hall-push button
More informationElectrical Joystick Controllers
Electrical Joystick Controllers for mobile hydraulics Reference: 100-P-700051-EN-05 Issue: 03.2016 1/24 2/24 Contents Page 1 Lever switches, FGE Series... 5 1.1 Description... 5 1.2 Ordering code... 5
More informationE3S-A. Built-in Amplifier Photoelectric Sensor (Medium Size) Ordering Information. Built-in Amplifier Photoelectric Sensors. Horizontal. 7 m.
Built-in Amplifier (Medium Size) ES-A Be sure to read Safety Precautions on page 0. Ordering Information Built-in Amplifier s Red light Infrared light Sensing method Appearance Connection method Sensing
More informationInclination sensors 2-dimensional, measuring range up to ±90
Features Size 52 mm MEMS capacitive measuring principle EN13849 compliant firmware E1 compliant design Interface CANopen, SAE J1939, Analog Connection M12 and cable Protection up to IP 69K Optional GIM500R
More informationProduct Information ROC 425 ROQ 437. Absolute Rotary Encoders with Solid Shaft for Safety-Related Applications
Product Information ROC 425 ROQ 437 Absolute Rotary Encoders with Solid Shaft for Safety-Related Applications 2/2016 ROC 425, ROQ 437 with synchro flange Rotary encoders for absolute position values with
More informationP/N: AX Distribute your control functions directly onto the valve.
TECHNICAL DATASHEET #TDAX022311 Dual Plug-In Valve Controller, CANopen 2-2.5A Outputs Programmable Distribute your control functions directly onto the valve. P/N: AX022311 Features: Configurable for 1
More informationPower Amplifiers for PVH-EDC Pumps
Vickers Accessories Power Amplifiers for PVH-EDC Pumps EEA-EDC-436-A*-32 Design A1 - For use with PVH57 & 74 A2 - For use with PVH98 A3 - For use with PVH131 Panel Display General Description These amplifiers
More informationMobileView Junction Box
Installation Instructions MobileView Junction Box (Catalog Number 2727-MRJB2) English The MobileView Junction Box (2727-MRJB2) integrates the following terminals into the control system: MobileView Guard
More informationEPGG001. Fieldbus Gateway RS-232 to PROFINET. Industrial Communication. Technical Data. Part Number
Fieldbus Gateway RS-232 to PROFINET EPGG001 Part Number Easy handling Gateway from RS-232/422/485 interfaces to PROFINET With two Industrial Ethernet ports Technical Data Electrical Data Supply Voltage
More informationAvailable with actuator function: POWER OPEN - POWER CLOSE FAILSAFE MODULATING FAILSAFE MODULATING. Overview
59in.lbs Smart Electric Valve Actuator Feature rich multi-voltage smart electric actuator with LED status light and function conversion kits. JC-S5 +DPS +BSR Overview The JC-S5 multi-voltage smart electric
More informationInclination sensors 1-dimensional, measuring range
Features Size 52 mm MEMS capacitive measuring principle EN13849 compliant firmware E1 compliant design Interface CANopen, SAE J1939, Analog Connection M12 and cable Protection up to IP 69K Optional GIM500R
More informationHG series Hand grip Hall effect joysticks
Distinctive features and specifications Rugged, hand operation Hall effect sensing Sealed up to IP68 1 million life cycles Redundant outputs available Analog, USB and custom outputs CANbus J1939 and CANopen
More informationInclinometer. 4-20mA and RS232
Inclinometer 4-20mA and RS232 Real size Main Features - Two axis digital inclinometer n - Angle measurement range of +/-5, +/-15 and +/-30, Resolution up to 0.001 - Active linearization and temperaturecompensation
More informationAvailable with actuator function: POWER OPEN - POWER CLOSE FAILSAFE MODULATING FAILSAFE MODULATING. Overview
Feature rich multi-voltage smart electric actuator with LED status light and function conversion kits. JC-S5 +DPS Overview The JC-S5 multi-voltage smart electric valve actuator offers an impressive list
More informationAbsolute encoders - bus interfaces Solid shaft with synchro flange Magnetic single- or multiturn encoders 14 bit ST / 18 bit MT
EAM60 - solid shaft CANopen - MAGRES Features Encoder single- or multiturn / CANopen Precise magnetic sensing Angular accuracy up to ±0.1 Additional incremental signals High protection up to IP 67 High
More informationVCSO COMPACT / RUGGED JOYSTICK CONTROLLER
VCSO COMPACT / UGGED JOYSTICK CONTOLLE Construction: The TYPE VCSO Joystick Controller is rugged, compact and offers excellent application versatility. VCSO Joysticks are utilized where precise proportional
More informationSwitches and Indicators 84
Switches and Indicators 84 84 Switches and Indicators Index Series 84 Description Page 177 Product Assembly Page 178 Mounting Instruction Page 179 Product Range - pushbuttons for flush mounting - accessories
More informationØ 11,4 21,5. M9 x 0,5 Ø 12 Ø 11,4. M9 x 0,5 Ø 12. M9 x 0,5
Subminiature 7 series Screw termination M9 8 contacts Degree of protection IP7 Solder termination Moulded versions Diameter, mm Male angled connector 8,, Ø,, Contacts Cable outlet Ordering-No. 99 00 70
More informationAbsolute encoders - bus interfaces Solid shaft with clamping or synchro flange Magnetic single- or multiturn encoders 14 bit ST / 18 bit MT
Features Encoder single- or multiturn / CANopen Precise magnetic sensing Angular accuracy up to ±0.15 Additional incremental signals High protection up to IP 67 High resistance to shock and vibrations
More informationMS series Mid-size Hall effect joysticks
Distinctive features and specifications Compact size 1, 2 and 3 axis configurations Sealed up to IP68 Available with USB Redundant outputs available 1 million life cycles Available with J1939 CANbus and
More informationVersaMax IP Input Module
Module is used to accept digital input signals. Module Specifications Housing dimensions (width x height x depth) Connection style Operating temperature Storage temperature Operating/storage humidity 60mm
More informationDigital Proportional Valve Amplifier
Digital Proportional Valve Amplifier The Amplifier is a compact, low profile DIN mounted controller for use with proportional solenoid valves. The provides current to a valve coil in proportion to an input
More informationMOTION CONTROL SOLUTIONS
CONTINENTAL HYDRAULICS MOTION CONTROL SOLUTIONS CEM Modules Software Tools Accessories MOTION CONTROL SOLUTIONS ence output v (0 ma) Reference output v (0 ma) Input 0 to /0v or to 0 ma pers 0 & 9 oltage
More informationAvailable with actuator function: POWER OPEN - POWER CLOSE FAILSAFE MODULATING FAILSAFE MODULATING. Overview
Feature rich J+J multi-voltage smart electric actuator with LED status light and function conversion kits. J3C-S20 Overview The J3C-S20 multi-voltage smart electric valve actuator from the European electric
More informationDigital electropneumatic positioner
Digital electropneumatic positioner Type 879 can be combined with Compact metal housing Graphic display with backlight Easy start-up Comprehensive range of additional software functions Profibus DPV1 (optional)
More information1.5 Moeller series. RMQ-Titan pilot devices. System overview. M30 Flat Front System overview
RMQ-Titan pilot devices.5 Moeller series M30 Flat Front System overview System overview 2 3 3 4 0 3 4 5 2 0 3 2 2 6 7 3 0 4 8 5 7 6 8 9 38 Command & Signaling CA047003EN October 206 www.eaton.eu Moeller
More informationContents. Part no.: MLC500T Safety light curtain transmitter
Part no.: 68000307 MLC500T30-750 Safety light curtain transmitter Figure can vary Contents Technical data Suitable receivers Dimensioned drawings Electrical connection Circuit diagrams Operation and display
More informationHG series Hand grip Hall effect joysticks
Distinctive features and specifications Rugged, hand operation Hall effect sensing Sealed up to IP68 1 million life cycles Redundant outputs available Analog, USB and custom outputs CANbus J1939 and CANopen
More informationIB080QM65VA3 Part Number
Inductive Proximity Switch with increased Switching Distance IB080QM65VA3 Part Number Technical Data Inductive Data Switching Distance 8 mm Correction Factors V2A/CuZn/Al 0,93/0,40/0,36 quasi-flush A/B/C/D
More informationCJ series Ergonomic multifunction joysticks
an APEM Group Company CJ series The CJ Series joystick features an ergonomic multifunction handle purposely designed for safety critical hand-operated applications. Available as a one or two axes joystick,
More informationVENTILATION BUTTONS 24 V DC
VENTILATION BUTTONS 24 V DC Ventilation button (with foil push buttons and displys) Application: Ventilation button for connection to the ventilation inputs of SHEV or natural ventilation control units.
More informationL-LAS Series L-LAS-LT-55. Design. L-LAS Series Laser Line Sensors. Product name: L-LAS-LT-55 (incl. Windows - software L-LAS-LT-Scope)
L-LAS Series - Visible laser spot (red), class 2 laser product - Reference distance 55 mm - Measuring range typ. 10 mm, resolution typ. 0,01 mm - Integrated interference filter / red light filter - CCD
More informationInstruction book IQAN-LSL. Publ no HY /UK Edition 0301
Instruction book IQAN-LSL Publ no HY17-8367/UK Edition 0301 Contents 1 Introduction......................................................2 2 Precautions.......................................................3
More informationEncoders Absolute Singleturn Encoder Types A58CS8
Types A58CS8 Sturdy design with hardened bearings High rotation speed -40...+80 C/-40...+76 F operating temperature range High shock and vibration resistance Magnetic field proof also available as explosion
More informationLVX Control Unit. Features:
Date 2013-02-28 Control Unit Features: Most parameters can be defined as required for your interfaces. You decide which information is output and how. Fast cycle times, just a few µs/beam. Maximum beam-count
More informationMiniAmp. Electronics & Software. Miniature Charge Amplifier. Type 5030A...
Electronics & Software MiniAmp Type 5030A... Miniature Charge Amplifier The MiniAmp Type 5030A is a single channel, industrial charge amplifier, which converts the charge signal from piezoelectric sensors
More informationInstruction book IQAN-LST. Publ no HY /UK Edition 0301
Instruction book IQAN-LST Publ no HY17-8364/UK Edition 0301 Contents 1 Introduction......................................................2 2 Precautions.......................................................3
More informationSwitchgear and control equipment
Switchgear and control equipment / Master controllers, differential limit switches / Summary / / Grab differential limit switch SJ /7 Crane controllers /7 Summary / Rotatable crane controller SJ9 0 / Contactors
More informationRCMB20/RCMB Series
4 T M /-500 Series Integratable Ground Fault Monitoring Modules For Integration Into Frequency Converters and Combiner Boxes Technical Bulletin NAE1042510 / 10.2012 BENDER Inc. 700 Fox Chase, Coatesville
More informationClassification Enclosure rating Input voltage Type of
Slim Relay G2RV The World's First Industrial Slim Relay Large plug-in terminals for reliable connection. LED indicator and mechanical flag to check operation. Special input type with gold plated contacts.
More informationTechnical data. General specifications. Functional safety related parameters B 10d Electrical specifications Operating voltage U B
Model Number Cable pull rotary encoder with PROFI- NET interface Features Robust aluminum drum housing Drum travel when cable retracted using threaded spindle Bellows with steel tip Comprehensive accessories
More informationProduct Information ROC 425 ROQ 437. Absolute Rotary Encoders with EnDat 2.2 for Safety-Related Applications
Product Information ROC 425 ROQ 437 Absolute Rotary Encoders with EnDat 2.2 for Safety-Related Applications 10/2016 ROC 425, ROQ 437 with synchro flange Rotary encoders for absolute position values with
More informationData Sheet for Joysticks
Series TRY or axes Life expectancy of Million cycles Sealed up to IP68 Multifunction handle for additional functions, e.g. Switches, Rockers, Deadman Optional interfaces: USB, CANbus J99 or CANopen The
More informationPHOENIX CONTACT - 11/2007. This data sheet is only valid in association with the IB IL SYS PRO UM E user manual.
INTERBUS Inline Bus Coupler; Remote Bus Connections Via D-SUB Connectors REMOTE IN BA UL RD RC DSUB LD AUTOMATIONWORX Data Sheet 6362_en_03 PHOENIX CONTACT - 11/2007 REMOTE OUT Description The bus coupler
More informationJC 300 MULTI-AXIS FINGERTIP JOYSTICK
JC 300 MULTI-AXIS FINGERTIP JOYSTICK Developed for those applications where weight and functionality are paramount, the JC300 offers switched or proportional fingertip control in up to three axes. Designed
More informationSafety Systems Safety Integrated
3SE2 / SE3 Molded plastic /metal enclosure with separate actuator Application Safety interlock switches with separate actuator are used where the position of doors, covers or safety screens must be monitored
More informationNote: KLASCHKA КB WIDENT/P 1/9
3.2 for 8 positions (NC contact) Position detector for detection of eight different codes with eight outputs (NC contact). 3.3 for 15 positions (Binary code) Position detector for detection of 15 different
More informationOptimum sensing capability for LCD manufacturing
SENSORS FOR Glass Substrate Detection Sensor Amplifier-separated FX-301-F FT-F9 FD-F7 EX-F70/F60 HD-T1 M FD-L3 Reliable detection of glass substrates Its unique optical system enables detection of transparent
More informationTechnical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 480 a at 40 C Mission Time (T M ) L 10
Model Number Features Very small housing Up to 31 bit overall resolution CANopen interface Free of wear magnetic sampling High resolution and accuracy Description This absolute rotary encoder provides
More informationAG series Agricultural grips
an APEM Group Company AG series The new AG Series Handle provides an innovative approach for machine control of off-highway equipment and agricultural applications. Professionally designed for optimal
More informationGSV-1A4 M12/2 M12/2. Highlights
GSV-1A4 M12/2 M12/2 Highlights Input sensitivity: 2mV/V; 4mV/V, 2 mv/v, 1mV/V, 0.5mV/V configurable via jumpers Output signals ±10V AND 12mA+-8mA on 15 pin Sub-D Integrated half and quarter bridge completion
More informationDatasheet - RSS 36-D-R-ST
14.03.2018-19:30:37h Datasheet - RSS 36-D-R-ST Safety sensors / RSS 36 Thermoplastic enclosure RFID-technology for needs-based protection against tampering Misaligned actuation possible 27 mm x 108.2 mm
More informationData Sheet for Joysticks
Finger Joystick Series 87 Dual redundant outputs IP67 sealed lever heights: 8mm and 60mm 5 lever colors Series 87 is offering paddle joysticks of high precision and quality - claims that are not only supported
More informationthe Interactive Catalog
Interactive Catalog Supplements Catalog PDFs If you need detailed product information, or help choosing the right product for your application, see our Interactive Catalog Use the Interactive Catalog to
More informationInstallation / Control Technique
Installation / Control Technique Interface Relay, Interface Relay System Input-Output Interface Relay IK 3070, I_ 3070 0633 IK 3070 Circuit Diagrams IS 3070 According to IEC/EN 61 810-1 Relay, triac or
More informationVNSO MILL DUTY JOYSTICK CONTROLLER
VNSO MILL DUTY JOYSTICK CONTROLLER Application: The type VNSO Joystick controllers are characterized by their unmatched versatility and rugged construction. They are actively providing directional and
More informationE3S-A. Built-in Amplifier Photoelectric Sensor (Medium Size) Ordering Information. Built-in Amplifier Photoelectric Sensors. Horizontal. 7 m.
Built-in Amplifier (Medium Size) ES-A CSM_ES-A_DS_E Be sure to read Safety Precautions on page 0. Ordering Information Built-in Amplifier s Red light Infrared light Sensing method Appearance Connection
More informationData Sheet for Joysticks
Series TRY or axes Life expectancy of Millionen cycles Sealed up to IP68 Multifunction handle for additional functions, e.g. Switches, Rockers, Deadman also available with USB- or CANbus-Interface The
More informationAbsolute encoders - bus interfaces Encoder kit Magnetic single- or multiturn encoders 14 bit ST / 18 bit MT
Magnetic single- or multiturn encoders 1 bit ST / 18 bit MT Features single- or multiturn / CANopen Precise magnetic sensing Angular accuracy up to ±0.1 Additional incremental signals High protection up
More informationCJ series Ergonomic multifunction joysticks
The CJ series joystick features an ergonomic multifunction handle purposely designed for safety critical hand-operated applications. Available as a one or two axes joystick, the CJ series utilizes non-contacting
More informationIncremental encoders Solid shaft with clamping or synchro flange pulses per revolution
GI55, GI56 Features Encoder with solid shaft ø mm or ø6 mm Max. 6000 pulses per revolution Optical sensing method Clamping or synchro flange Industrial standard High rotation speed up to 000 rpm Optional
More informationAPS4 Inductive Proximity Sensors
APS4 Inductive APS4-S-E-D APS4-S-E2-D APS4-M-E-D APS4-M-E2-D Compact x27 mm plastic DC 4 models available Compact polycarbonate housing; comes with mounting plate High-frequency oscillation type DC 3-wire,
More informationData sheet * * Digital 2-channel transmitter for direct connection to bus-capable automation devices. Design and mode of operation
d e v e l o p i n g s o l u t i o n s DE43 Data sheet Digital 2-channel transmitter for direct connection to bus-capable automation devices The bus-capable 2-channel transmitter is suitable for measuring
More informationSPRING-LOADED CONNECTORS PAD CONNECTORS
SPRING-LOADED CONNECTORS PAD CONNECTORS GENERAL SPECIFICATIONS The values listed below are general specs applying for Preci-Dip spring-loaded connectors. Please see individual catalog page for additional
More informationHFX series I First generation Hall effect joysticks
an APEM Group Company HFX series I The HFX Series I Joystick is designed for precision finger operated applications requiring proportional control and long trouble-free life. Featuring non-contacting Hall
More informationIndicator, round, raised, full face with plastic matt chrome bezel, 22.5 mm mounting, lamp block included. Yellow Green
22.5 mm 3.5 mm IP65 1 A 66 VAC Choose one component from each of the coloured sections to assemble a complete switch. For other options or further information please contact your local sales office. INDICATOR
More informationIncremental Encoder with Hollow Shaft
Incremental Encoder Type RI 36-H n miniature industry encoder for high number of pulses n short mounting length n easy mounting procedure n Application e.g.: - Motors - Machine tools - Packaging Machines
More informationSlim Relay G2RV. Model Number Structure. Ordering Information. Model Number Legend. List of Models. Relay and Socket Combinations
Slim Relay G2RV The World's First Industrial Slim Relay Large plug-in terminals for reliable connection. LED indicator and mechanical flag to check operation. Transparent housing enables checking relay
More informationNOVOTURN Multiturn-Sensor non-contacting. Series RSM2800 digital SSI, SPI
NOVOTURN Multiturn-Sensor non-contacting Series RSM2800 digital SSI, SPI Special features True Power On System: counts turns even when not powered. Patented non-volatile technology does not require gears
More informationPower consumption In operation At rest For wire sizing
echnical data sheet Modulating damper actuator for adjusting air control dampers in ventilation and airconditioning systems for building services installations For air dampers up to approx 08 m orque Nm
More informationAnalog micro push button
Analog micro push button for rugged applications 145MA... + 0.5...4.5 V DC analog output at 5 ± 0.5 V DC operating voltage + output signal can be adjusted within the voltage range + non-contact operation
More informationProfibus-DPV1 Set in IP67 TI-BL67-DPV1-6
Type designation Ident no. 1545030 Number of channels 6 Dimensions (W x L x H) 172 x 145 x 77.5 mm Cable max. 50 m between interface and read/write head 3 decimal rotary coding switches for the adjustment
More informationData Sheet for Joysticks
Different handle designs available Optionally with Pushbuttons and Deadman Industrial-suited robust design IP classes up to 68 (on request) Several Output Options (analog, CAN J1939, CANopen, USB) The
More informationTable of Contents LED Machine Lighting - Pg. 1 Automation & Sensing - Pg. 27 Safety - Pg. 255 Switching & Controls - Pg. 449 Index - Pg.
Safety Selection Guide... 430 Type 2 SG2 Series (Basic & Extended Models)... 431 Type 4 SG4 Series... 435 Mounting Brackets and Accessories... 439 www.idec.com/safety Light Curtains Overview XW Series
More informationPRO-6 HEAVY-DUTY SINGLE AXIS JOYSTICK CONTROLLER
PO-6 HEAVY-DUTY SINGLE AXIS JOYSTICK CONTOLLE PO-6 Single Axis Heavy-Duty Joystick PO-6H Single Axis Heavy-Duty Hall-effect Joystick Construction: The ultra-rugged PO-6 provides precise proportional control
More informationSafe switching and monitoring Non-Contact Safety Sensors
Safe switching and monitoring Non-Contact Safety Sensors Electronic safety sensors are used to detect guard door closure. These sensors use noncontact operating principles (pulse echo or RFID) that limits
More informationThermoelectric Cooler Controller TED1000
Thermoelectric Cooler Controller TED1000 Operating Instructions MANUAL-TED1000-1.0 Aug 2015 Rev.1 2 Contents 1 General... 4 1.1 Warranty and Assistance... 4 1.2 Maintenance... 4 1.3 General Safety Considerations...
More informationPLC-OPT- 24DC/230AC/1
Extract from the online catalog PLC-OPT- 24DC/230AC/1 Order No.: 2900369 PLC-INTERFACE, consisting of PLC-BPT basic terminal block with Push-in connection and plug-in miniature solid-state relay, for mounting
More informationHG series Hand grip Hall effect joysticks
The HG Series joystick is a rugged Hall effect controller designed for use in high operating force, hand-operated applications requiring reliable positioning control. Available with several high-function
More information4.7 Expansion Module MAC00-FS1/FS4
MAC00-FS4 With M12 connectors MAC00-FS1 With D sub connectors TT1068GB 4.7.1 High speed serial RS485 module MAC00-FS1 and FS4 Introduction The MAC00-FS1 and FS4 are used for high speed RS485 communication
More informationCables. U.S. Registered Trademark EN0B-0341GE51 R0402 Copyright 2002 Honeywell Inc. All rights reserved
N20010/N34010 NON-SPRING RETURN DAMPER ACTUATOR 20/34 Nm (177/300 lb-in) FOR MODULATING CONTROL PRODUCT DATA GENERAL These direct-coupled damper actuators provide modulating control for: air dampers, VAV
More informationData Sheet. JS6000 Joystick Base
Data Sheet JS6000 Joystick Base Mobile Machine Management The JS6000 joystick base is an element of the flexible, powerful, expandable, and affordable joystick family of mobile machine management products.
More informationProduct Discontinuation Notices. Discontinuation Notice of Safety Laser Scanner Type OS3101 series
PRODUCT NEWS Product Discontinuation Notices July 4, 2011 Presence Detection Sensors No. 2011195E Discontinuation Notice of Safety Laser Scanner Product Discontinuation Safety laser scanner Accessories
More informationSAFETY & MESUREMENT SERIE SG-BODY BIG
safety BODY PROTECTION LIGHT CURTAINS SERIE SG-BODY BIG reflector The new SG BODY BIG safety light curtain series thanks to its new housing together with the innovative design optical-electronic platform
More informationElectronic SD1, AS 8, ASR 14, ASR 20
Electronic SD1, AS 8, ASR 14, ASR 20 2 Electronic SD1, AS 8, ASR 14, ASR 20 Contents Page List of contents..................................................... 3 Function and characteristics.........................
More informationTechnical Datasheet clima RCM-CC
Technical Datasheet 1. Product description The is a room control panel with an integrated temperature sensor for measuring the room temperature. The device is featured with a turn wheel to adjust the set
More informationAnalog electric proportional joysticks JEP
Analog electric proportional joysticks JEP 2.01.09 Index: Description: Page 3 Technical features: Page 4 Metering curve: Page 5 Overall dimensions: Pages 6 9 Control handles: Page 10 Rubber boot: Page
More informationMore Precision. wiresensor // Draw-wire displacement sensors
More Precision wiresensor // Draw-wire displacement sensors 42 Long distance draw-wire sensors wiresensor P200 digital - Robust aluminium profile housing - Customized versions for OEM - Incremental/absolute
More informationJ3C-H20DPS 25Nm Smart Electric Actuator Type: J3C Model: H20DPS
JC-H20DPS 25Nm Smart Electric Actuator Modulating Type: JC Model: H20DPS Feature rich J+J multi-voltage smart electric actuator with LED status light and function conversion kits. Overview The JC-H20DPS
More informationInductive sensor For rotary actuators NI4-DSU35-2Y1X2-H1140
ATEX category II 2 G, Ex zone 1 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
More informationC5 Series Stainless Steel Photoelectric
C5 Series Stainless Steel Photoelectric Part Number Sensing Range M5 (5 mm) stainless steel - DC 14 models available Diffuse and through-beam styles Long operating distances Compact stainless steel housing
More informationTechnical data. General specifications. factory setting: 125 ms Memory Non-volatile memory Write cycles Indicators/operating means
Model Number Single head system Features IO-link interface for service and process data Programmable via DTM with PACTWARE Switch output and analog output Selectable sound lobe width Synchronization options
More informationOperating instructions. Switching amplifier DN0210 DN / / 2015
Operating instructions Switching amplifier DN0210 DN0220 UK 80011079 / 00 01 / 2015 Contents 1 Preliminary note...4 1.1 Symbols used...4 1.2 Warning signs used...4 2 Safety instructions...5 2.1 General...5
More informationAnalog display for resistance current
www.reinhausen.com Analog display for resistance current Operating Instructions BA 2220061/01 NOTE The product may have been modified after this document went to press. We expressly reserve the right to
More information