2.5-Inch SATA Solid State Drive

Transcription

1 RunCore Pro IV Solid State Product Manual RCP-IV-S25XX-MC Revision 2.0 Oct,

2 Table of Contents 1 General Description Features Key Feature Summary Device Certifications Electrical Characteristics Supply Voltage Power Consumption Environmental Specification R/W Performance Block Diagram Physical Dimensions Pin and Signal Descriptions Command Sets ATA Commands Flash Management Features SMART Subcommand Set Part Numbering Scheme Related Documentation Contact Us

3 1 General Description RunCore Pro IV 2.5" SATA SSD is designed for various fields. The product adopts advanced flash controller and NAND flash, contains the cache size of up to 64MB. With a higher performance in read/write rate than mechanism hard drive. Furthermore, its characteristics of low power consumption and anti-vibration are obvious. 2.5" SATA SSD complies with SATA 2.6 spec, which supports all major operating systems such as Windows9X /Me/NT/XP/CE/Vista/Windows7, MAC, Linux and Unix, Solaris, Vxworks. With no moving parts and seek time, it does not need to spin up into action or to seek files in the way that traditional hard disk drives do - enabling it to work much faster. It supports capacity from 64GB to 256GB with maximum transfer rate as high as 255MB/s. 2.5" SATA SSD is ideal for energy-efficient mobile PC to extend battery life. 3

4 2. Features 2.1 Key Feature Summary Table1 2.5" SATA SSD Features Interface SATA Dimension 2.5" 100.2mm 76.6mm 9mm Spec Capacity 64GB~256GB Cache 64 MB Flash Media 34nm MLC-NAND Flash Sequential Read 255 MB/s Sequential Write 165 MB/s Performance1 4KB Random Read 28 MB/s 4KB Random Write 8 MB/s Input Voltage 5V ± 5% Power Consumption2 Idle < 0.5 W 4KB Random write < 1.5 W Write endurance: >80years@10GB write/day(32gb) Reliability and Stability Read endurance: unlimited MTBF: >1,000,000 Hours Build-in EDC/ECC function Static and Dynamic Wear-leveling Bad Block Management Algorithm Operation Temperature Weight3 Commercial( 0 ~+70 ) < 120g Warranty 2 years,,:the read/write max rate, power consumption and weight vary with different capacity of products. 4

5 2.2 Device Certifications Certification/Compliance CE Compliant FCC Certified RoHS Compliant 2.3 Electrical Characteristics Supply Voltage Table2 Certifications Description Indicate conformity with the essential health and safety requirements set out in European. Directives Low Voltage Directive and EMC directive. Federal Communications Commission Certified Restriction of Hazardous Substance Directive Table3 Supply Voltage Symbol Description Min. Value Max. Value Unit TS Storage Temperature C Vin Analog Power Supply V Power Consumption Table4 Typical Power Consumption Capacity Mode Power Consumption(Unit:mA,Vin=5V) Idle 4K Read 4K Write 64GB GB GB :Test Version: Iometer

6 2.4 Environmental Specification The test objects about environment specification in manufacturing process as follow: Temperature Table5 Environmental Specification (Industrial) 0-70 (Commercial) (Wide Temperature) Degree /6h /6h /6h Humidity / / / Vibration / / / Shock / / / Altitude / / / Note: 1) Altitude: The drive is not sensitive to changes in altitude because it has no moving parts. Drive tested between -1K and 40K feet. 2) Acoustics: The drive has no moving or noise-emitting parts; therefore, it produces negligible noise (0 db) in all modes of operation. 2.5 R/W Performance ATTO Disk Bench Table6 Read/Write Performance1 Model P/N Read (MB/s) Write (MB/s) RCP-IV-S2564-MC RCP-IV-S2528-MC RCP-IV-S2556-MC Flash Media Type :MLC 6

7 3 Block Diagram Figure1 SATA SSD Block Diagram 7

8 4 Physical Dimensions Figure2 2.5" SATA SSD Physical Dimension Table8 2.5" SATA SSD Physical Dimension Dimension Millimeter Inch A ± ±0.010 A ± ±0.010 A3 76.6± ±0.010 A ± ±0.010 A ± ±0.010 A6 3± ±0.010 A7 4.8± ±0.010 A8 9.00± ±

9 5 Pin and Signal Descriptions This section identifies the pin locations and signal descriptions of the RunCore High Performance SSD. Figure3 Layout of Signal and Power Segment Pins Table9 Signal Description Pin Signal Description S1 GND 2 nd mate S2 A+ Differential signal pair A from Phy S3 A- S4 GND 2 nd mate S5 B- S6 B+ Differential signal pair B from Phy S7 GND 2 nd mate P1 P2 P3 V33 V33 V V power, pre-charge, 2 nd mate, not connected P4 GND 1 st mate P5 GND 2 nd mate P6 GND 2 nd mate P7 P8 P9 V5 V5 V5 5 V power, pre-charge, 2 nd mate 5 V power, pre-charge, 2 nd mate 9

10 P10 GND 2 nd mate P11 Reserved P12 GND 1 st mate P13 V12 P14 V12 12 V power, pre-charge, 2 nd mate, not connected P15 V12 10

11 6 Command Sets 6.1 ATA Commands The RunCore Pro Ⅳ 2.5"SATA SSD supports all the mandatory ATA commands defined in the ATA/ATAPI-7 specification. Command Name Table10 Supported ATA Command Lists Command Code (Hex) Command Name Command Code (Hex) CHECK POWER MODE E5h or 98h Disable write cache EFh/82h DEVICE CONFIGURATION - Set transfer mode EFh/03h DEVICE CONFIGURATION FREEZE LOCK DEVICE CONFIGURATION IDENTIFY DEVICE CONFIGURATION RESTORE B1h/C1h B1h/C2h B1h/C0h Enable DMA Setup FIS Auto-Activate optimization Disable DMA Setup FIS Auto-Activate optimization EFh/10h/02h EFh/90h/02h Enable Device-initiated interface power state transitions EFh/10h/03h DEVICE CONFIGURATION SET B1h/C3h Disable Device-initiated interface power state transitions EFh/10h/03h DOW NLOAD MICROCODE 92h SET MAX - EXECUTE DEVICE DIAGNOSTIC 90h SET MAX ADDRESS F9h/na FLUSH CACHE E7h SET MAX FREEZE LOCK F9h/04h FLUSH CACHE EXT EAh SET MAX LOCK F9h/02h IDENTIFY DEVICE ECh SET MAX SET PASSWORD F9h/01h IDLE E3h or 97h SET MAX UNLOCK F9h/03h IDLE IMMEDIATE E1h or 95h SET MAX ADDRESS EXT 37h INITIALIZE DEVICE PARAMETERS 91h SET MULTIPLE MODE C6h NOP 00h/00h SLEEP E6h or 99h 11

12 READ BUFFER E4h SMART - READ DMA C8h SMART DISABLE OPERATIONS B0h/D9h READ DMA EXT 25h SMART ENABLE OPERATIONS B0h/D8h READ FPDMA QUEUED 60h SMART ENABLE/DISABLE ATTRIBUTE AUTOSAVE B0h/D2h READ LOG EXT 2Fh SMART ENABLE/DISABLE AUTOMATIC OFF-LINE B0h/DBh READ MULTIPLE C4h SMART EXECUTE OFF-LINE IMMIDIATE B0h/D4h READ MULTIPLE EXT 29h SMART READ DATA B0h/D0h READ NATIVE MAX ADDRESS F8h SMART READ LOG B0h/D5h READ NATIVE MAX ADDRESS 27h SMART RETURN STATUS B0h/DAh EXT READ SECTOR(S) 20h SMART SAVE ATTRIBUTE VALUES B0h/D3h READ SECTOR(S) EXT 24h SMART W RITE LOG B0h/D6h READ VERIFY SECTOR(S) 40h STANDBY E2h or 96h READ VERIFY SECTOR(S) EXT SECURITY DISABLE PASSWORD 42h STANDBY IMMEDIATE E0h or 94h F6h WRITE BUFFER E8h SECURITY ERASE PREPARE F3h WRITE DMA CAh SECURITY ERASE UNIT F4h WRITE DMA EXT 35h SECURITY FREEZE LOCK F5h WRITE FPDMA QUEUED 61h SECURITY SET PASSWORD F1h WRITE LOG EXT 3Fh SECURITY UNLOCK F2h WRITE MULTIPLE C5h SEEK 70h WRITE MULTIPLE EXT 39h 12

13 SET FEATURES - WRITE SECTOR(S) 30h Enable write cache EFh/02h WRITE SECTOR(S) EXT 34h 6.2 Flash Management Features Bad block management Dynamic and static wear-leveling Defect management to extend NAND Flash life cycle Sudden power-off recovery 6.3 SMART Subcommand Set In order to select a subcommand the host must write the subcommand code to the device's Features Register before issuing the SMART function set command. The subcommands are listed below. Table11 SMART subcommand sets Command SMART READ DATA SMART ENABLE/DISABLE ATTRIBUTE AUTOSAVE SMART SAVE ATTRIBUTE VALUES SMART EXECUTE OFF-LINE IMMIDIATE SMART READ LOG SMART W RITE LOG SMART ENABLE OPERATIONS SMART DISABLE OPERATIONS SMART RETURN STATUS SMART ENABLE/DISABLE AUTOMATIC OFF-LINE Command Code (Hex) D0h D2h D3h D4h D5h D6h D8h D9h DAh DBh 13

14 7 Part Numbering Scheme R C X - X - X X X X X - X X X X ~2. Manufacturer Information RC: RunCore 3. Product Series P Pro Series E Elite Series X Invicible Series 5. Product Information Ⅰ Version No.1 Ⅱ Version No.2 Ⅲ Version No.3 Ⅳ Version No.4 7. Interface Type S SATA Interface P PATA Interface M MPCI-Express Interface Z ZIF Interface E PCIe Interface L LIF Interface 8~9. Product Dimension inch inch inch mm MPCI-Express mm MPCI-Express 01 1LanePCIe 04 4LanePCIe 08 8LanePCIe 10~11. Product Capacity 14

15 08 8GB 16 16GB 32 32GB 40 40GB 64 64GB 80 80GB GB GB GB GB 13. Flash type M MLC S SLC 14. Temperature Grade C Commercial Grade ( 0 ~ ~ + 70 ) I Industrial Grade (-20 ~ ~ + 70 ) W Extended Temperature Grade (-40 ~ ~ + 85 ) M Military Temperature Grade (-55 ~ ) 15. Input Voltage 3 3.3V 5 5V 16. Optional A F For MAC CF 8 Related Documentation For more information, visit or contact support@runcore.com. 15

16 9 Contact Us Hunan Runcore Innovation Technology Co., Ltd Address:Third floor,no.662, Lugu Avenue Yuelu District, Changsha P.R.C. Post Code: Runcore(Beijing)Co., Ltd Address:18/F, No.127,East Avenue, Xuanwumen,Xicheng District, Beijing,P.R.C. Post Code: Shenzhen Branch Address:Room.2314,HangGang FuChun Commercial Building NO.6031,Shennan Road,Futian District,Shenzhen,P.R.C. Post Code: Runcore (Shanghai)Co., Ltd Address:Room ,Putuo Private Enterprise Headquarters,No.226, Taopu Road,Putuo District, Shanghai. P.R.C Post Code: Runcore (Hangzhou)Co., Ltd Address:No.39. 3rd Avenue, Hangzhou Economic Development Zone,Hangzhou,Zhejiang,P.R.C. Post Code: Tel: / Fax: sales@runcore.com support@runcore.com 16