LED55WPG Programmable LED Driver

Size: px
Start display at page:

Download "LED55WPG Programmable LED Driver"

Transcription

1 Dimmable Constant Current Rev Electrical Specifications Input Voltage Range: Frequency: Power Factor: Inrush Current: Input Current (Max): -77 Vac Nom. (8-35 V Min/Max) 5/6 Hz Nom. (47-63 Hz Min/Max) full load, V through 77V <3. Amps 77 Vac.56 V, 6Hz.5 77V, 6Hz Maximum Power: 55W Line Regulation: ±% Load Regulation: ±3% THD: < > 6% full load Ripple Current: 5% (Max) Start-up Time: 5mS (typical) Protections Over-voltage Short Circuit Yes Auto Recovery Environmental Specifications Max Case Life Temp: (5 year warranty) 66 C Maximum Case Temp (UL): 8 C Type TL Rating: 86 C/ 6 C Minimum Starting Temp: -3ºC Storage Temperature: -4ºC to +85ºC Humidity: 5% to 9% RH Cooling: Convection Vibration Frequency: 5 to 55 Hz/g, 3 minutes Sound Rating: Class A Lifetime: 5, Tc point EMC: FCC 47CFR Part 5 Class A compliant Model E336 Output Current (ma +5%) Output Voltage (Vdc) Max Output Power (W) Type TL Rating Typical Efficiency LED55WPG-55-C5-D /6 C 88% Class : US/Canada TYPE TL Program driver with GUI software for fast setup Option to program output current with resistor Linear or logarithmic dimming curve options Flicker free output for comfort and critical applications -stage power supply design for better performance over wide range of outputs Auxiliary Vdc, ma output for powering controls or fans NTC option allows for themal protection of LED engine Adjustable Output Current: -5mA UL Dry & Damp Location Rated, Class, Type TL Dim to zero with -V dimming Metal housing Required Programming Tools Model PG-C3 PG-SW Safety Certification UL/CUL CE EMC Standard FCC, 47CFR Part 5 EN 555 EN 6-3- EN EN Energy Star Description TRP Programming Cord (3 ft. long); REQUIRED TRP Programming Software DOWNLOAD Standard UL875, UL3 for UL Class & CAN/CSA C. No. 5.3, UL Type TL 86/6 C EN6347-, EN Notes Class A Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment. Part 3-: Limits for harmonic current emissions Class C, 8% Rated Power Part 3-3: Limitation of voltage changes, voltage fluctuations and flicker. Part 4-5: Surge Immunity test, kv L-N, 4 kv L-FG & N-FG Energy Star transient protection: Ballast or driver shall comply with ANSI/IEEE C6.4.- and ANSI/IEEE C6.4.-, Category A operation. The line transient shall consist of seven strikes of a khz ring wave,.5 kv level, for both common mode and differential mode. Pg of 7

2 Dimensions 3.8 [78.3]. [5.6]. [5].64 [67] (TOP OF CASE).56 [6.5] (Tc) Point.689 [7.5].3 [8.]. [5] R. [R.5] WHITE (N) BLACK (L) GREEN (GND) USB NTC RSET +V V+ V- R. [R3]. [5].64 [67] PUSH IN CONNECTORS Wire Gauge: AWG mm.35 [9.] Insulation Strip Length LED Light Engine Remote Mounting Recommended maximum wiring distance at full load. R.6 [R.5].8 [4.5] 3.8 [96.6] 4.4 [7.7] AWG # # # Distance (m) 4 Distance (ft) #9 # [9.3] -RO. [R.5] 3.8[78.3]. [8].6 [5.9].47 [].69 [7.6] Power Characteristics. Power Factor / Load 3% THD / Load.95 5% PF.9.85 V/6Hz 3V/5Hz 77V/6Hz THD % V/6Hz 3V/5Hz 5% 77V/6Hz.8.75 % 5%.7 % % 6% 8% % % Load 6% 8% % Load Lifetime / Case Temperature Typical Efficiency / Load 4 % 95% Efficiency 9% 85% 8% 75% 7% V/6Hz 3V/5Hz 65% 77V/6Hz Case Hotspot Temperature ( C) Note: The area under the life-temperature curve represents where the driver has highly reliable operation within specification. performance may drift out of published specifications as the hours of operation exceed the curve at a given temperature. Higher operating temperatures increase the chances of a failure to function. Other electrical, mechanical and environmental factors affect driver lifetime but are not represented in this calculation. 6% % 6% 8% % Load UL Conditions of Acceptability See website for additional information Pg of 7

3 Wiring Connections (White) NEUTRAL (Black) LINE (Green) GND (NEUTRAL) (LINE) (GROUND) INING POWER USB Programming Cord (PG-C3) (Gray) NTC (Gray) RSET (Purple) (Gray) - (Gray) V@mA (Red) LED+ (Blue) LED- PURPLE + GRAY - OPTIONAL FOR NTC OPTION FOR RSET OPTION -V DIMMER or CONTROL RSET RESISTOR NTC LED ENGINE -Vdc Dimming Parameters Min Typical Max V Auxiliary Output V.V 3.V V Auxiliary Output Source Current ma - ma Absolute Voltage Range on -V Input () Source Current out of -V Input () -. V - +5 V ma -.5 ma. Single series strings of LEDs will perform best with deep dimming settings.. LEDs with parallel strings (discrete component or COB) may not perform well with deep dimming settings. 3. Specific LED and driver combinations must be tested to determine the lowest output setting for stable performance. Output Current % Output Current / -VDC Dimming Control Voltage Min set to % Linear Logarithmic V V V 3V 4V 5V 6V 7V 8V 9V V Purple-to-Gray Voltage (Vdc) Output Current % Output Current / -VDC Dimming Control Voltage Min set to % Linear Logarithmic V V V 3V 4V 5V 6V 7V 8V 9V V Purple-to-Gray Voltage (Vdc) Pg 3 of 7

4 Wiring Typical Dimming Circuit: -Wire Resistance Typical Dimming Circuit: -Wire -V Analog +V OUT (No Connection) Leviton IP7 Wall Dimmer (Example) +V OUT (No Connection) V -V Sink (Dimmer must be current-sink type control) Typical Dimming Circuit: 3-Wire Resistance Typical Dimming Circuit: V Powered Control +V OUT Potentiometer +V OUT +V IN + - -V OUT Dimmer/ Control/ Sensor. Part comes with, & +V auxiliary connectors. and +V return are connected to. This is for controls and sensors that need a V supply.. Part is compatible with most -V Wall Slide dimmers and direct -V analog signal. Recommended dimmer is Leviton IP7 or equivalent connected between Purple and wires. 3. Output current will be Minimum Programmed Value when Vdim.V. If set to % then this indicates dim to zero operation. 4. Output will be % with / open or above 9.V and Minimum Programmed Value with / Shorted. 5. Minimum dimming level is programmable with TRP Programming software. 6 OPERATING WINDOW Vout (Vdc) vs. Output Current Vout (Vdc) Minimum POC Pg 4 of 7

5 Programming The Output Select resistance (RSET) from the table for required output current (ILED). Connect as shown in the wiring diagram. Table (full range) POC POC POC POC POC POC POC GUI SET Reading Resistor Codes K % resistor Black Brown Red Orange Yellow Green Blue Purple Gray White figures figures figures multipliers tolerance K K K M M % Silver 5% Gold % %.5%.5%.%.5% Output Current vs POC Setting: If is open, TRP Programmer GUI can be used to set. Output Current vs. or GUI value is within ±5%. can be any /4W, ±%, V rated resistor. ¹ >9,9 Ohms will default to GUI setting Table (nominal output currents) (Ω) GUI SET. Minimum wattage resistor rating is /4W leaded.. Larger wattages can be used for easy installation. 3. RSET best placed in LED engine to avoid field replacement programmability issues. 4. If RSET is placed on LED engine, SMD 85 size is recommended. Pg 5 of 7

6 Module Temperature Protection using External NTC (Negative Temperature Coefficient) Select a Negative Thermal Coefficient (NTC) resistor with a resistance range that allows the full output current to flow at safe LED operating temperatures. NTC resistance should drop sufficiently to allow reduced output current at elevated or harmful LED temperature levels. NTC operation should be thoroughly tested to ensure proper operation over all the full temperature range of the and the LED Engine. Example: NTC High, NTC Low and NTC Minimum % can be programmed using TRP Programmer USB interface & TRP PC based GUI Software. Factory Default Settings: NTC Low =.K ~ %, NTC High = 6.3K, % settings: NTC Minimum Level (%), NTC Minimum Ohms, NTC Maximum Ohms. % Output Current (%) vs. NTC % 8% (%) 6% 4% % % NTC Module Temperature Protection Example NTC = 85SMD, R 5C = 5K Ohm ± %, R 64C = 37, Vishay Part #: NTCS85E353GMT With part set: NTC Max = 6.3K, NTC MIN =.K, Min = % % Output Current (%) vs. NTCS85E353GMT NTC Temp ( O C) % 8% (%) 6% 4% % % NTC Temp ( O C) Pg 6 of 7

7 Programming TRP s NTC Output Current (POC): from ma to 5mA NTC settings: NTC Minimum Level (%), NTC Minimum Ohms, NTC Maximum Ohms. Factory Default: NTC Minimum =.K, ~ %, NTC Maximum = 6.3K, % dimming curve: Linear or LOG Factory Default: Linear Dimming Curve Minimum Dim Level: % (OFF) to % programmed value. Factory Default: Min dim level % TRP Programming Tools: The TRP programming tools consists of programming software along with a special programming cord connected between the USB port of a computer and the TRP programmable LED driver being configured. The TRP programming software is a Windows PC based graphical user interface (GUI) that allows the user to program and configure the operating parameters of a TRP programmable LED driver. This interface allows the operator to set the LED drivers output current within its specified range. It also provides the ability to enable/disable and control features like "Dimming", "Auxiliary Output", "NTC Thermal Protection", "Constant Lumen Module", & "End-of-life indicator" when available in the LED driver being programmed. Programming Cord (PG-C3): This is a specially designed cord adapter with USB connectors for linking the computer and the LED driver being programmed. This unit also provides all power required to the LED driver being programmed. A standard USB cable can be used to extend the length of the Programming Cord from the computer USB port. The micro-usb connector on the Programming Cord must be connected directly to the TRP Drive. Programming Software (PG-SW): The programmer software is the windows based GUI that allows the user to assign custom part number(s) to the LED driver being programmed. The user can then save the driver profile to an external file and recall as needed. The "Auto Program" feature allows many LED drivers to be programmed to the same stored profile. This can be done by plugging the cord to each driver and a single click of the mouse. The programmer software supports bar code scanners. The barcode scanner can be used to automate the programming of the attached LED driver. This barcode scanner interface also provides an option to either enable or disable logging of the parameters to an Excel file. Download the PG-SW software from the TRP website: The programming of the LED driver does not require the input be connected to an AC power connection. The TRP Programming Tool and the required LED driver circuitry will be powered from the programmer module via the USB connection to a computer. For new GUI settings to take effect the AC input must be cycled off/on and the USB interface disconnected. Labeling s: It is highly recommended that the drivers be labeled with information traceable to the programming profile. It can include the programmed output current, dimming curve type, minimum dimming level and name of the file storing the profile. This information is critical to answering any field questions from the contractor or end user. Parameters Parameter Minimum Value Maximum Value Factory Default GUI RSET Output Constant Current () ma 5 ma ma YES YES Disable Dimming? NO YES NO YES N/A Dimming Curve LINEAR % N/A Fixed % % YES N/A LOG % N/A Fixed % % YES N/A NTC Minimum Ohms K Ω K Ω K Ω YES N/A NTC Minimum % ~% % ~% YES N/A NTC Maximum Ohms K Ω K Ω 6.3K Ω YES N/A Pg 7 of 7

S025W-056C W Programmable LED Drivers

S025W-056C W Programmable LED Drivers Rev 12-14-17 Electrical Specifications Maximum Power: 25W Typical Efficiency: 88% Input Voltage Range: 1-277 Vac Nom. (108-305 V Min/Max) Frequency: 50/ Hz Nom. (47-63 Hz Min/Max) Power Factor: 0.90 @

More information

Environmental. Electrical Specifications at 25 O C. Programmable Maximum Value. Factory Default

Environmental. Electrical Specifications at 25 O C. Programmable Maximum Value. Factory Default LED Optimized Drivers 55 Watt - -55-PC1500-RD FLICKER FREE LED DRIVER WITH 0-10V DIMMING & 12V AUX Model: Series Environmental 55W Drive Mode: Flicker Free Programmable Constant Current Technology: PFC

More information

Environmental. Electrical Specifications at 25 O C. Programmable Maximum Value. Factory Default

Environmental. Electrical Specifications at 25 O C. Programmable Maximum Value. Factory Default 25 Watt - -56-PC1300-RD FLICKER FREE LED DRIVER WITH 0-10V DIMMING & 12V AUX Model: Series Environmental Drive Mode: Flicker Free Programmable Constant Current Technology: PFC Corrected 2-Stage Switch

More information

Environmental. Electrical Specifications at 25 O C. Programmable Maximum Value

Environmental. Electrical Specifications at 25 O C. Programmable Maximum Value Model: LP Series Environmental LP Drive Mode: Flicker Free Programmable Constant Current Output Voltage: 12-56VDC Output Current: Set by resistor value (Rset) or GUI Programmable Output Current (POC):

More information

SAM Listed LED Optimized Drivers. Environmental. Electrical Specifications at 25 O C E Output Current. Voltage Accuracy

SAM Listed LED Optimized Drivers. Environmental. Electrical Specifications at 25 O C E Output Current. Voltage Accuracy Model: LP96W 480V UL SAM Series Drive Mode: Constant Voltage Technology: PFC Off-Line Switch Mode Power: 96W Max. Input Voltage: 77 to 480VAC, 50/60Hz Voltages: 4VDC Currents: 1000mA - 4000mA Environmental

More information

SAM Listed LED Optimized Drivers. Environmental. Electrical Specifications at 25 O C E Output Current. Voltage Accuracy

SAM Listed LED Optimized Drivers. Environmental. Electrical Specifications at 25 O C E Output Current. Voltage Accuracy Model: LD40W480 UL SAM Series Drive Mode: Constant Voltage Technology: PFC Off-Line Switch Mode Power: 40W Max. Voltages: 1VDC or 4VDC Currents: 418mA - 3330mA Environmental 1. Operating temperature: Tc

More information

SAM Listed LED Optimized Drivers. Environmental. Electrical Specifications at 25 O C E Output Current. Voltage Accuracy

SAM Listed LED Optimized Drivers. Environmental. Electrical Specifications at 25 O C E Output Current. Voltage Accuracy 17 Watt s Model: LD UL SAM Series Drive Mode: Constant Voltage Technology: PFC Off-Line Switch Mode Power: Max. Voltages: 1VDC or 4VDC Currents: 175mA - 1400mA Environmental 1. Operating temperature: Tc

More information

Environmental. Electrical Specifications at 25 O C E Output Constant Current

Environmental. Electrical Specifications at 25 O C E Output Constant Current 12 Watt - Model: Environmental Drive Mode: Constant Current or Constant Voltage Technology: PFC Off-Line Switch Mode : Max. Input Voltage: 120 to 277VAC, 47-63Hz Number of Outputs: One Output Voltages:

More information

Environmental. Electrical Specifications at 25 O C E Output Constant Current

Environmental. Electrical Specifications at 25 O C E Output Constant Current 17 Watt - LD Series LD Series Model: LD Series Environmental Drive Mode: Constant Current or Constant Voltage Technology: PFC Off-Line Switch Mode : Max. Input Voltage: 100 to 277VAC, 47-63Hz Number of

More information

AFLEX MAGNITUDE 40W PROGRAMMABLE LED DRIVER QUICK SPECS FEATURES WIRING DIAGRAM ENCLOSURE DETAILS

AFLEX MAGNITUDE 40W PROGRAMMABLE LED DRIVER QUICK SPECS FEATURES WIRING DIAGRAM ENCLOSURE DETAILS MAGNITUDE L I G H T I N G DIM DOWN TO 0.1% DIMMABLE AFLEX E465183 40W PROGRAMMABLE LED DRIVER CLASS P CLASS 2 E4 65 18 3 The AFlex Series of Constant Current Programmable LED Drivers offers high efficiency,

More information

Typical Efficiency (2) 350 ma 90 ~ 305 Vac 57~114Vdc 160 W 92.0% EUC-160Q035DT(ST) (3 ) Parameter Min. Typ. Max. Notes

Typical Efficiency (2) 350 ma 90 ~ 305 Vac 57~114Vdc 160 W 92.0% EUC-160Q035DT(ST) (3 ) Parameter Min. Typ. Max. Notes EUC160QxxxDT(ST) 160W Fourchannel Constant Current IP67 Driver Features Ultra High Efficiency (Up to 92%) Four Channels Output Active Power Factor Correction (0.99 Typical) Constant Current Output Input

More information

Max. Input Power (W) Input Current (Arms) / 83 <15% Dimming. Enclosure

Max. Input Power (W) Input Current (Arms) / 83 <15% Dimming. Enclosure Product Overview Input Voltage (Vac) Output Power (W) Output Voltage Range (V) Output Current (A) Efficiency@ Max Load and 70 C Case Max Case Temp. ( C) Input Current (Arms) Max. Input Power (W) Inrush

More information

I/P-O/P:3000VAC, I/P-FG:1750VAC, I/P-(0-10V) Dimming: 1750VAC, O/P-(0-10V) Dimming: 1750VAC,O/P-FG:500VAC Insulation Resistance

I/P-O/P:3000VAC, I/P-FG:1750VAC, I/P-(0-10V) Dimming: 1750VAC, O/P-(0-10V) Dimming: 1750VAC,O/P-FG:500VAC Insulation Resistance BLE Compatible Constant Current Programmable Driver Input Voltage: 120V-277V~ - 50/60Hz Constant Current Programmable 250-1500mA Class 2 LED Driver Output Voltage Range of 10-57V General Specifications

More information

Output Power. Parameter Min. Typ. Max. Unit Remark. Parameter Min. Typ. Max. Unit Remark

Output Power. Parameter Min. Typ. Max. Unit Remark. Parameter Min. Typ. Max. Unit Remark PISE-A240A (Pb-Free) 240W Selectable Output Power 180V - 310V / 0.5A - 0.7A - 1.0A / 240W Features Dimmable Type : 1-10 Dimming Input Cable : Double or Reinforced Insulation Mechanical Outline (Metal Case)

More information

Features. Applications and Benefits TRC ELECTRONICS, INC

Features. Applications and Benefits TRC ELECTRONICS, INC Features Gelo LED power supplies are designed specifically for use in LED lighting, particularly well-suited for refrigeration, retail display and sign applications. The industry standard footprint and

More information

Feature Ultra High Efficiency (Up to 94%)

Feature Ultra High Efficiency (Up to 94%) EUG240SxxxDT Feature Ultra High Efficiency (Up to 94%) Full Power at Wide Output Current Range (Constant Power) 05V/010V/PWM/Timer Dimmable Input Surge Protection: 6 kv lineline, 10 kv lineearth AllAround

More information

UL8750, UL1012, EN61347, BIS R Output Safety Certifications Approved. Output Power. Parameter Min. Typ. Max. Unit Remark

UL8750, UL1012, EN61347, BIS R Output Safety Certifications Approved. Output Power. Parameter Min. Typ. Max. Unit Remark PISE-A040A (Pb-Free) 40W Selectable Output Power 38V - 77V / 0.35A - 0.5A - 0.7A / 40W Features Dimmable Type : 1-10 Dimming Input Cable : Double or Reinforced Insulation Selectable Output Current (0.35A

More information

SL-LU US Type TL SL-LU US Class P

SL-LU US Type TL SL-LU US Class P ProductDataSheet Rev.1.0 2017.08 15 1# LED Driver Outdoor 55W Driver SL-LU1425501US Type TL SL-LU1425502US Class P Constant Current LED Driver High Efficiency Constant Current LED Driver With Active Power

More information

Typical Efficiency (2) 0 ~ 12.5 A 150 W 90.0% EUV-150S012DTA(STA) 0 ~ 6.25 A 150 W 90.5% EUV-150S024DTA(STA) (4)

Typical Efficiency (2) 0 ~ 12.5 A 150 W 90.0% EUV-150S012DTA(STA) 0 ~ 6.25 A 150 W 90.5% EUV-150S024DTA(STA) (4) EUV150SxxxDTA(STA) Features High Efficiency (Up to 90.5%) Isolated 010V Dimmable(DTA models) NonDimmable (STA models) Deep Dimming down to 0.1% Constant Voltage PWM Output Frequency up to 1.5kHz DimtoOff

More information

Gelo LED Driver 100W, Single output, Constant Voltage RGLD100-24

Gelo LED Driver 100W, Single output, Constant Voltage RGLD100-24 Features Gelo LED power supplies are designed specifically for use in LED lighting, particularly well-suited for refrigeration, retail display and sign applications. The industry standard footprint and

More information

Constant Voltage Mode

Constant Voltage Mode FEATURES: AC Input 1~277VAC Built-in Active PFC Function Protection: SCP / OVP / OTP Flicker Free High Operating Ambient Temp.: -3 ~+6 Surge protection: L-N 4KV, L-FG/N-FG 8KV Safety: UL 875 / PSE EMI:

More information

Gelo LED Driver 100W, Single output RGLD100-24

Gelo LED Driver 100W, Single output RGLD100-24 Features Gelo LED power supplies are designed specifically for use in refrigeration, retail display and sign applications. The industry standard footprint and very low profile design provide great benefits

More information

Outdoor 200w Driver SL-L2282B002US

Outdoor 200w Driver SL-L2282B002US Data Sheet Rev 1.0 2016. 07. 18 1# LED Driver Outdoor 200w Driver SL-L2282B002US Constant Current LED Driver Features & Benefits Output Current Range: TYP 5.6 A ( Fixed current ) Output Voltage Range:

More information

Outdoor 25W Driver SL-LA US

Outdoor 25W Driver SL-LA US Data Sheet Rev.1.0 2016. 7. 11 1# LED Driver Outdoor 25W Driver SL-LA7012502US Constant Current LED Driver Features& Benefits Output Current Range: 700mA Fixed Output Voltage Range: 18 ~ 36Vdc Output Power

More information

SAMSUNG ELECTRO-MECHANICS CO., LTD

SAMSUNG ELECTRO-MECHANICS CO., LTD Model Name : Features : ㅡ Suitable for LED lighting application ㅡ UL8750, UL1310 Class 2 ㅡ For use in Dry and Damp Location ㅡ Full-protection provided: OCP/OLP/OTP/SCP ㅡ Non potting product Electrical

More information

Max. Input Power (W) Input Current (Arms) / 100 <15% >0.9. Dimming

Max. Input Power (W) Input Current (Arms) / 100 <15% >0.9. Dimming Product Overview Input Voltage (Vac) Output Power (W) Output Voltage Range (V) Output Current (A) Efficiency@ Max Load and 70 C Case Max Case Temp. ( C) Input Current (Arms) Max. Input Power (W) Inrush

More information

Output Voltage Range. Power ma ma 700 ma 176~305 Vac 155~343 Vdc 240 W 94.0% 0.98 EBD-240S105DV

Output Voltage Range. Power ma ma 700 ma 176~305 Vac 155~343 Vdc 240 W 94.0% 0.98 EBD-240S105DV EBD240SxxxDV Features Ultra High Efficiency (Up to 94%) Full Power at Wide Output Current Range (Constant Power) Compact Package Design 05V/010V/PWM/Timer Dimmable Input surge protection: 6 kv lineline,

More information

Efficiency (1) 110Vac 220Vac. (2, 3) 3330 ma 90 ~ 305 Vac 11 Vdc 35 W 84% EUC-040S333DS(6) EUC-040S333PS(6)

Efficiency (1) 110Vac 220Vac. (2, 3) 3330 ma 90 ~ 305 Vac 11 Vdc 35 W 84% EUC-040S333DS(6) EUC-040S333PS(6) LED Driver EUC040SxxxDS 20110114 F Features High Efficiency (Up to 88%) Active Power Factor Correction (Typical 0.92) Constant Output Current Lightning Protection Waterproof (IP66) Dimming Control AllRound

More information

Application Package Dimension Output Input Output Output Protection Option Code Code Power Voltage Quantity Voltage Type (W) (VAC) (VDC)

Application Package Dimension Output Input Output Output Protection Option Code Code Power Voltage Quantity Voltage Type (W) (VAC) (VDC) Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE T A H 450 U S 12 - F2 Application Package Dimension Output Input Output Output Protection

More information

Typical Efficiency (2) Max. Output Power. 700 ma 160~305 Vac 30~60 Vdc 42 W 88% 0.95 EBC-042S105DV(SV)-0007

Typical Efficiency (2) Max. Output Power. 700 ma 160~305 Vac 30~60 Vdc 42 W 88% 0.95 EBC-042S105DV(SV)-0007 Features High Efficiency (Up to 88%) Constant Current Output 010V Dimmable Input Surge Protection: 6kV lineline, 10kV lineearth AllAround Protection: OVP, SCP, OTP Waterproof (IP67) SELV Output Suitable

More information

OPTOTRONIC LED Power Supply

OPTOTRONIC LED Power Supply www.osram-americas.com/optotronic OPTOTRONIC LED Power Supply OT180W/347-480/1250C/2DIMLT2/P6 - Technical Specifications GENERAL INFORMATION Item Number 79209 ELECTRICAL SPECIFICATIONS Input Input Voltage

More information

Output Voltage Range. Power ma ma 700 ma 176~305 Vac 97~214 Vdc 150 W 93.0% 0.98 EBD-150S105DVA

Output Voltage Range. Power ma ma 700 ma 176~305 Vac 97~214 Vdc 150 W 93.0% 0.98 EBD-150S105DVA EBD150SxxxDVA Features Ultra High Efficiency (Up to 93.0%) Full Power at Wide Output Current Range (Constant Power) Compact Package Design 05V/010V/PWM/Timer Dimmable Input surge protection: 6 kv lineline,

More information

Max. Input Power (W) Input. (Arms) 277V. Vin 41/ 100. Dimming Method. 1-10V Isolated UL Class 1 and Class 2 Wiring. Enclosure

Max. Input Power (W) Input. (Arms) 277V. Vin 41/ 100. Dimming Method. 1-10V Isolated UL Class 1 and Class 2 Wiring. Enclosure Output Power (W) Output Voltage (V) Output Current (A) Efficiency@ Max Load Max Case Temp. ( C) Input Current (Arms) Max. Input Power (W) Inrush Current (Apk/50%-µs) THD @ Max Load (%) Power Factor @ Max

More information

DRIVER BROWN (LED+) YELLOW (LED-) VIOLET (NTC) GREEN (SGND) GREEN (SGND) ORANGE (RSET2)

DRIVER BROWN (LED+) YELLOW (LED-) VIOLET (NTC) GREEN (SGND) GREEN (SGND) ORANGE (RSET2) LED Driver Xitanium 25W 0.1-1.0A 36V 0-10V INT XI025C100V036DNMX Philips Advance Xitanium Downlight LED Drivers are designed to give OEMs ultimate flexibility. With wide operating windows, compact size

More information

Efficiency (1) 110Vac 220Vac

Efficiency (1) 110Vac 220Vac LED Driver EUC025SxxxDS 20110110 G Features High Efficiency (Up to 84%) Active Power Factor Correction (Typical 0.92) Constant Output Current Waterproof (IP66) Dimming Control AllRound Protection: OVP,

More information

Xitanium. LED Driver. Philips Advance. PHILIPS ADVANCE Xitanium LED Driver XITANIUM 36W A 48V 0-10V XI036C100V048DNM1. Dimensions.

Xitanium. LED Driver. Philips Advance. PHILIPS ADVANCE Xitanium LED Driver XITANIUM 36W A 48V 0-10V XI036C100V048DNM1. Dimensions. Philips Advance Xitanium LED Driver Features UL Class 2 output with Adjustable Output Current (AOC) SmartMate style housing with 90 C Tcase max Compatible with Philips Fortimo Down Light Modules Benefits

More information

Output Voltage Range. Max. Output Power ma ma 700 ma 176~305 Vac 43~107 Vdc 75 W 90.5% 0.98 EBD-075S105DV

Output Voltage Range. Max. Output Power ma ma 700 ma 176~305 Vac 43~107 Vdc 75 W 90.5% 0.98 EBD-075S105DV EBD075SxxxDV Features High Efficiency (Up to 90.5%) Full Power at Wide Output Current Range (Constant Power) Compact Package Design 05V/010V/PWM/Timer Dimmable Input surge protection: 6 kv lineline, 10

More information

50W 0-10V LED Driver with Smooth Dimming to 1%

50W 0-10V LED Driver with Smooth Dimming to 1% 50W 0-10V LED Driver with Smooth Dimming to 1% ECOdrive Programmable digital ECOdrive LED driver providing standard LED fixtures with the smoothest flicker-free dimming to 1% light output, delivering value

More information

Series AMER120-AZ up to 5A AC-DC / DC-DC LED Driver / Converter

Series AMER120-AZ up to 5A AC-DC / DC-DC LED Driver / Converter Click on Series name for product info on aimtec.com Series AMER120-AZ FEATURES: AC-DC Constant Current or Constant Over Current Protection Voltage LED Driver Short Circuit Protection Input range 90-305VAC/47-440Hz

More information

Electrical Specifications VAC/390 VDC, Universal (Derate from 100% at 100V AC to 77% at 80V AC)

Electrical Specifications VAC/390 VDC, Universal (Derate from 100% at 100V AC to 77% at 80V AC) 180 Watt Industrial Features 4 x 2 x 0.75 Inches Form factor 180 Watts with Forced Air Cooling Efficiencies upto 92% -40 to 70 degree operating temperature* 12V / 0.5A Fan Output, Thermal Shut-Down feature

More information

OPTOTRONIC LED Power Supply OT100W/ /1250C/2DIMLT2/P6-Technical Specifications

OPTOTRONIC LED Power Supply OT100W/ /1250C/2DIMLT2/P6-Technical Specifications www.osram-americas.com/optotronic OPTOTRONIC LED Power Supply OT1W/347-48/125C/2DIMLT2/P6-Technical Specifications GENERAL INFORMATION Item Number 7927 ELECTRICAL SPECIFICATIONS Input Input Voltage (VAC)

More information

Max. Output Power. Typical Efficiency (1) 350 ma 90 ~ 305 Vac 107~214Vdc 75 W 92% EUC-075S035DT(3)

Max. Output Power. Typical Efficiency (1) 350 ma 90 ~ 305 Vac 107~214Vdc 75 W 92% EUC-075S035DT(3) EUC075SxxxDT Features High Efficiency (Up to 92%) Active Power Factor Correction (0.99 Typical) Constant Current Output Dimming Function Lightning Protection AllRound Protection: OVP, SCP, OTP Waterproof

More information

Electrical Specifications

Electrical Specifications Output Power (W) Output Voltage (V) Output Current (A) Efficiency@ Max Load Max Case Temp. ( C) Input Current Max. Input Power (W) Inrush Current (Apk/50%-µs) TH D @ Max Load (%) Power Factor @ Max Load

More information

SOLOdrive AC, 30W, 0-10V + AUX, 1 control channel, constant current, 1x 55V output, side feed, long metal

SOLOdrive AC, 30W, 0-10V + AUX, 1 control channel, constant current, 1x 55V output, side feed, long metal 30W 0-10V 'Dim to Dark' LED Driver SOLOdrive SOLOdrive offers industry-best Natural Dimming to dark - LED dimming made beautiful! With any dimmer, in any application. Symbiosis on SOLOdrive stands for

More information

LED Driver. Xitanium. 25W A 36V 0-10V INT (1% dim) with SimpleSet XI025C100V036DSM1 XI025C100V036DSM5. Specifications.

LED Driver. Xitanium. 25W A 36V 0-10V INT (1% dim) with SimpleSet XI025C100V036DSM1 XI025C100V036DSM5. Specifications. LED Driver Xitanium 25W 0.1-1.0A 36V 0-10V INT (1% dim) with SimpleSet XI025C100V036DSM1 XI025C100V036DSM5 The Philips Advance Xitanium range of downlight LED drivers is designed to provide OEMs with ultimate

More information

Flat. PIFN-C072B Flat 75W LED Driver. Features. Electrical Specifications. Input Specifications 1 / 8 18V - 23V / 2.00A - 3.

Flat. PIFN-C072B Flat 75W LED Driver. Features. Electrical Specifications. Input Specifications 1 / 8 18V - 23V / 2.00A - 3. PIFN-C072B Flat 75W LED Driver 18V - 23V / 2.00A - 3.26A / 75W Features Dimming Method: 0-10V Dimming (0V=10%) Mechanical Outline Constant Current Control (Metal Case) Adjustable Output Current - 424 30

More information

D10CC150HV10F. HRV ( V) Dimmable LED Driver 1050mA, Constant Current Output 0 10V Dimming to 10% Thermal Foldback Control.

D10CC150HV10F. HRV ( V) Dimmable LED Driver 1050mA, Constant Current Output 0 10V Dimming to 10% Thermal Foldback Control. HRV (347 480V) Dimmable LED Driver 1050mA, Constant Current Output 0 10V Dimming to 10% Thermal Foldback Control Performance Input Voltage 347 ~ 480 Vac ± 10% Input Current Max 0.48 /347V 0.34/480V Input

More information

XI040C110V054BPT1 Brand Name XITANIUM XITANIUM 40W A 54V 0-10V w/t

XI040C110V054BPT1 Brand Name XITANIUM XITANIUM 40W A 54V 0-10V w/t Product Overview Input Voltage (Vac) Output Power (W) Output Voltage Range (V) Output (A) Efficiency@ Max Load and 70 C Case Max Case Temp. ( C) Input (Arms) Max. Input Power (W) Inrush (Apk/50%-µs) THD

More information

OPTOTRONIC LED Power Supply OT100W/ V/1250C/2DIMLT2/P6 - Technical Specifications

OPTOTRONIC LED Power Supply OT100W/ V/1250C/2DIMLT2/P6 - Technical Specifications www.osram.us/optotronic OPTOTRONIC LED Power Supply OT1W/347-4V/125C/2DIMLT2/P6 - Technical Specifications GENERAL INFORMATION Item Number 7927 ELECTRICAL SPECIFICATIONS Input Input Voltage (VAC) 347V-4V

More information

240W Six-channel Constant Current IP67 Driver

240W Six-channel Constant Current IP67 Driver www.inventronicsco.com Tel: 8657156565800 Fax: 8657186601139 sales@inventronicsco.com EUC240HxxxDT(ST) 240W Sixchannel Constant Current IP67 Driver Features Ultra High Efficiency (Up to 91.0%) Six Channels

More information

Output Voltage Range. Max. Output Power. (4) 90~305 Vac 127~300 Vdc 8 ~54 Vdc 40 W 89.5% LUD-040S150BSF

Output Voltage Range. Max. Output Power. (4) 90~305 Vac 127~300 Vdc 8 ~54 Vdc 40 W 89.5% LUD-040S150BSF LUD040SxxxBSF Rev. C 40W Programmable IP20 Driver with DALI Features Dimtooff with Standby Power 0.5 W Alwayson Auxiliary Power: 12Vdc, 200mA Thermal Sensing and Protection for LED Module Full Power at

More information

Programmable Power Supply with DALI

Programmable Power Supply with DALI Programmable Power Supply with DALI Product picture Model Name ㅡ Features : ㅡ Suitable for LED lighting application ㅡ Programmable Power Supply Unit(Adjustable Output Current) ㅡ UL8750/UL1012(Non Class

More information

Features. Regulated Converter. RAC35-G/OF 35 Watt 4 x 2 Open Frame RAC35- SG/OF. AC/DC Converter

Features. Regulated Converter. RAC35-G/OF 35 Watt 4 x 2 Open Frame RAC35- SG/OF. AC/DC Converter Features Regulated Converter Description Universal input -264VAC Efficiency up to 86% Short circuit and over voltage/current protected UL/EN9 certified, CE marked Conformal coated product The RAC35-xxG/OF

More information

OLU550P102U1U PSOV550102*

OLU550P102U1U PSOV550102* Model Name Model Code PSOV550102U PSOV550102W PSOV550102V Features : ㅡ Flickerless ㅡ Full-protection provided: OCP/OVP/OTP/SCP/OLP ㅡ Low Power Dissipation (Stand-by mode :

More information

LED Driver. Xitanium. 75W A 54V 0-10V 1% 347V with SimpleSet XG075C200V054BST1. Specifications. Enclosure. Wiring Diagram

LED Driver. Xitanium. 75W A 54V 0-10V 1% 347V with SimpleSet XG075C200V054BST1. Specifications. Enclosure. Wiring Diagram LED Driver Xitanium 75W 0.1-2.0A 54V 0-10V 1% 347V with SimpleSet XG075C200V054BST1 Philips Advance Xitanium linear LED drivers with SimpleSet technology are designed to give OEMs ultimate flexibility.

More information

LL1x150-CR-DA. 150 W Dimmable DALI-2 LED driver. 150 W V 0 / Hz. Functional Description. Mains Characteristics

LL1x150-CR-DA. 150 W Dimmable DALI-2 LED driver. 150 W V 0 / Hz. Functional Description. Mains Characteristics 150 W Dimmable DALI-2 LED driver DALI-2 certified LED driver, 1-100 % dimming range Filtered hybrid dimming technology Very high efficiency up to 96 % Low ripple and flicker (according to IEEE 1789) Suitable

More information

LED Driver. Xitanium. 20W A 54V 0-10V INT (1% dim) with SimpleSet XI020C056V054BST2. Specifications

LED Driver. Xitanium. 20W A 54V 0-10V INT (1% dim) with SimpleSet XI020C056V054BST2. Specifications LED Driver Xitanium Class P Tp (110 C) UL Class 2 For Dry and Damp Location 20W 0.1-0.56A 54V 0-10V INT (1% dim) with SimpleSet XI020C056V054BST2 The Philips Advance Xitanium range of linear LED drivers

More information

Electrical Specifications

Electrical Specifications Output Power (W) Output Voltage (V) Output Current (A) Efficiency@ Max Load Max Case Tem p. ( C) Input Current Max. Input Power (W) Inrush Current (A pk/50%-µs) THD @ Max Load (%) Power Factor @ Max Load

More information

Output Voltage Range. Max. Output Power

Output Voltage Range. Max. Output Power EBS120SxxxBTE Features Ultra High Efficiency (Up to 93.5%) Full Power at Wide Output Current Range (Constant Power) Thermal Sensing and Protection for LED Module DALI/AC Dim/Timer Dimmable (3 Timer Modes)

More information

Typical Efficiency (2) Max. Output Power ma 176 ~ 305 Vac 260~400Vdc 420 W 94.0% 0.95 EBC-420S105DV(SV)

Typical Efficiency (2) Max. Output Power ma 176 ~ 305 Vac 260~400Vdc 420 W 94.0% 0.95 EBC-420S105DV(SV) EBC420SxxxDV(SV) Features Ultra High Efficiency (Up to 94.0%) Constant Current Output 010V Dimming Control Input Surge Protection: 6kV lineline, 10kV lineearth AllAround Protection: OVP, SCP, OTP Waterproof

More information

LED Driver. Xitanium. 25W A 54V 0-10V INT (1% dim) with SimpleSet XI025C070V054DSM1 XI025C070V054DSM5. Specifications.

LED Driver. Xitanium. 25W A 54V 0-10V INT (1% dim) with SimpleSet XI025C070V054DSM1 XI025C070V054DSM5. Specifications. LED Driver Xitanium 25W 0.1-0.7A 54V 0-10V INT (1% dim) with SimpleSet XI025C070V054DSM1 XI025C070V054DSM5 Class P Tp(90 C) Class 2 Power Unit Dry & Damp Location Conforms to UL STD 991 for SREC Safety

More information

Electrical Specifications VAC/390 VDC, Universal (Derate from 100% at 100V AC to 77% at 80V AC)

Electrical Specifications VAC/390 VDC, Universal (Derate from 100% at 100V AC to 77% at 80V AC) 180 Watt Medical Features 4 x 2 x 0.75 Inches Form factor 180 Watts with Forced Air Cooling Approval to EN60601 3rd Edition Efficiencies upto 92% -40 to 70 degree operating temperature* Dual fusing 12V

More information

LL1x80-CR-DA. 80 W Dimmable DALI-2 LED driver. 80 W V 0 / Hz. Functional Description. Mains Characteristics

LL1x80-CR-DA. 80 W Dimmable DALI-2 LED driver. 80 W V 0 / Hz. Functional Description. Mains Characteristics 80 W Dimmable DALI-2 LED driver Product code: 5559 80 W 220 240 V 0 / 50 60 Hz DALI-2 certified LED driver, 1-100 % dimming range Filtered hybrid dimming technology Very high efficiency up to 9 Low ripple

More information

Output Voltage Range. Max. Output Power. (4) 90~305 Vac 127~300 Vdc 16~78 Vdc 60 W 90% LUD-060S110BS2

Output Voltage Range. Max. Output Power. (4) 90~305 Vac 127~300 Vdc 16~78 Vdc 60 W 90% LUD-060S110BS2 LUD060SxxxBS2 Rev. B 60W Programmable IP20 Driver with DALI Features Dimtooff with Standby Power 0.5 W AlwaysOn Auxiliary Power: 12Vdc, 200mA Thermal Sensing and Protection for LED Module Full Power at

More information

VER05 Series. xxx Series. 5 Watt. AC-DC Power Supplies. Models & Ratings. Input. Output

VER05 Series. xxx Series. 5 Watt.   AC-DC Power Supplies. Models & Ratings. Input. Output 5 Watt xxx Series Energy Efficiency Level VI Barrel Jack & USB Versions Interchangeable Mains Connectors Included Universal Input Output Voltages from 5.0 V to 12.0 V Class II Construction Low Cost B R

More information

OPTOTRONIC LED Power Supply OT180/UNV/800C/2DIMLT2/P6 - Technical Specifications

OPTOTRONIC LED Power Supply OT180/UNV/800C/2DIMLT2/P6 - Technical Specifications www.osram-americas.com/optotronic OPTOTRONIC LED Power Supply OT180/UNV/800C/2DIMLT2/P6 - Technical Specifications GENERAL INFORMATION Item Number 79366 ELECTRICAL SPECIFICATIONS Input Input Voltage (VAC)

More information

Xitanium. LED Driver. Philips Advance. PHILIPS ADVANCE Xitanium LED Driver XITANIUM 75W 1.05A 0-10V HCN-F XH075C105V070CNF1. Dimensions.

Xitanium. LED Driver. Philips Advance. PHILIPS ADVANCE Xitanium LED Driver XITANIUM 75W 1.05A 0-10V HCN-F XH075C105V070CNF1. Dimensions. Philips Advance Xitanium LED Driver Features High drive current Isolated 0-10V dimming New housing with increased thermal capability Benefits Enables higher lumen per dollar fixture designs Helps to maximize

More information

LL1x50-E-DA. 1x50 W Dimmable DALI LED driver. 50 W V 0 / 50 Hz 60 Hz. Functional description. Mains characteristics

LL1x50-E-DA. 1x50 W Dimmable DALI LED driver. 50 W V 0 / 50 Hz 60 Hz. Functional description. Mains characteristics 1x50 W Dimmable DALI LED driver Hybrid dimming technique for high quality light 50 W 220 240 V 0 / 50 Hz 60 Hz Suitable for use in emergency lighting applications DALI control input, 1 % - 100 % dimming

More information

Max. Input Power (W) Input Current. (A pk/50%-µs) Dimming Method. 1-10V Isolated DALI

Max. Input Power (W) Input Current. (A pk/50%-µs) Dimming Method. 1-10V Isolated DALI Output Power (W) Output Voltage (V) Output Current (A) Efficiency@ Max Load Max Case Temp. ( C) 75 80 ~ 152 0.350 0.70 > 92% 80 C 1 2 0 Input Current 2 0 0 2 4 0 Max. Input Power (W) 2 7 7 85 Inrush Current

More information

LED Driver. Xitanium. 75W 0.1-2A 54V 0-10V INT (1% dim) with SimpleSet XI075C200V054BST1. Specifications

LED Driver. Xitanium. 75W 0.1-2A 54V 0-10V INT (1% dim) with SimpleSet XI075C200V054BST1. Specifications LED Driver Xitanium Class P Tp (110 C) UL Class 2 For Dry and Damp Location 75W 0.1-2A 54V 0-10V INT (1% dim) with SimpleSet XI075C200V054BST1 The Philips Advance Xitanium range of linear LED drivers is

More information

Snaptec Australia Pty. Ltd.

Snaptec Australia Pty. Ltd. KEY FEATURES Universal Input: 90-264 VAC With P.F.C. Function, PF>0.95 Remote ON/OFF Function Current Share Function Power Good Function High Efficiency up to 90~93% Protections: Over Load / Over Voltage

More information

LED Driver. Xitanium. 54W A 54V 0-10V INT (1% dim) with SimpleSet XI054C150V054BST1. Specifications

LED Driver. Xitanium. 54W A 54V 0-10V INT (1% dim) with SimpleSet XI054C150V054BST1. Specifications LED Driver Xitanium Class P Tp (110 C) UL Class 2 For Dry and Damp Location 54W 0.1-1.5A 54V 0-10V INT (1% dim) with SimpleSet XI054C150V054BST1 The Philips Advance Xitanium range of linear LED drivers

More information

LED Driver Compact dimming

LED Driver Compact dimming Driver LC 35W 150 700mA 54V 0-10V C EXC UNV EXCITE series (US applications) Product description Constant current LED Driver Dimmable via 0... 10 V interface Dimming range 1 100 % Adjustable output current

More information

LED Driver. Xitanium DALI 40W A 54V DALI XI040C110V054YPT2

LED Driver. Xitanium DALI 40W A 54V DALI XI040C110V054YPT2 LED Driver Xitanium DALI 40W 0.10-1.1A 54V DALI XI040C110V054YPT2 Specifications Input Voltage (Vrms) Output Power (W) Output Voltage (V) Output (A) Efficiency @ Max. Load Max. The Philips Advance Xitanium

More information

HEC-100RTN-48QSCA Rev A1.0

HEC-100RTN-48QSCA Rev A1.0 HEC100RTN48QSCA Rev A1.0 A. Features High Efficiency (Up to 90%). Active Power Factor Correction (Typical 0.96). Isolation Class I (With FG) AllRound Protection: OVP/SCP/OTP/OPP. Fully isolated Metal case

More information

Inventronics LED Driver 0 10V DMX RDM

Inventronics LED Driver 0 10V DMX RDM Features Converts DMX Signal to 0-10V Dimming Signal Complies with both DMX RDM and Traditional DMX Networks Use Driver Dim-to-Off Capability to Eliminate AC Switch or Relay Powered by 12Vdc with Simple

More information

Series AMEPR60C-AZ up to 5A AC-DC / DC-DC LED Driver / Converter

Series AMEPR60C-AZ up to 5A AC-DC / DC-DC LED Driver / Converter Click on Series name for product info on aimtec.com Series AMEPRC-AZ Models Single output Model Max Output Power (W) 1 FEATURES: Output Voltage Range (V) 3 Output Current 3 AMEPRC-120AZ 36-0 - 1.20 AMEPRC-361AZ

More information

LFWLP350 SERIES 350 Watt Open Frame Power Supply Measures: 5.00 x 3.00 x 1.00

LFWLP350 SERIES 350 Watt Open Frame Power Supply Measures: 5.00 x 3.00 x 1.00 Features 5 x 3 x 1 Inches Form factor 350 Watts with Forced Air Cooling & 200 Watts Convection Cooling Efficiencies upto 94% -40 to 70 degree operating temperature* 12V / 0.5A Fan Output, Thermal Shut-Down

More information

LED Driver Linear / area dimming. Driver LC 50W mA 54V 0-10V lp EXC UNV EXCITE series SELV

LED Driver Linear / area dimming. Driver LC 50W mA 54V 0-10V lp EXC UNV EXCITE series SELV Driver LC 50W 350 1050mA 54V 0-10V lp EXC UNV EXCITE series SELV Product description Constant current LED Driver Dimmable via 0... 10 V interface Dimming range 1 100 % Adjustable output current between

More information

Xitanium. LED Driver. Philips Advance. PHILIPS ADVANCE Xitanium LED Driver. Xitanium 40W 0.70A 0-10V INT-J XI040C070V056CNJ1. Dimensions.

Xitanium. LED Driver. Philips Advance. PHILIPS ADVANCE Xitanium LED Driver. Xitanium 40W 0.70A 0-10V INT-J XI040C070V056CNJ1. Dimensions. Philips Advance Xitanium LED Driver Features 3 drive current options available 700mA, 1050mA, 1200mA, with UL Class 2 output 0-10V dimming Compact housing Benefits Flexibility of design via multiple drive

More information

Efficiency (1) 110Vac 220Vac

Efficiency (1) 110Vac 220Vac LED Driver EUC050SxxxDT 20110110 F Features Description The EUC050SxxxDT Series operate from a 90 ~ 30ac input range. These units will provide up to a 4200 ma of output current and a maximum output voltage

More information

Electrical Specifications VAC/390 VDC, Universal (Derate from 100% at 100V AC to 95% at 85V AC)

Electrical Specifications VAC/390 VDC, Universal (Derate from 100% at 100V AC to 95% at 85V AC) 225 Watt Industrial Features 4 x 2 x 1 Inches Form factor 225 Watts with Forced Air Cooling Efficiencies upto 94% -40 to 70 degree operating temperature* 12V / 0.5A Fan Output, Thermal Shut-Down feature

More information

Power Factor Model Number Voltage Voltage

Power Factor Model Number Voltage Voltage LED Driver EUV040SxxxPS 20101014 D Features High Efficiency (Up to 87%) Active Power Factor Correction (Typical 0.92) Constant Output Current Lightning Protection Waterproof (IP66) Dimming Control AllRound

More information

LED Driver. Xitanium DRIVER. 180W A 0-10V Dimming with SimpleSet and Aux. Output XI180C125V200PSF1. Specifications. Enclosure.

LED Driver. Xitanium DRIVER. 180W A 0-10V Dimming with SimpleSet and Aux. Output XI180C125V200PSF1. Specifications. Enclosure. LED Driver Xitanium 180W 0.1-1.25A 0-10V Dimming with SimpleSet and Aux. Output XI180C125V200PSF1 Specifications Input Voltage (Vac) Output Power (W) Output Voltage (V) Output Current (A) Efficiency@ Max.

More information

Max. Output Power. Typical Efficiency (2) 143~286Vdc 200 W 93.5% EUD-200S070GV. 95~190Vdc 200 W 93.5%

Max. Output Power. Typical Efficiency (2) 143~286Vdc 200 W 93.5% EUD-200S070GV. 95~190Vdc 200 W 93.5% EUD200SxxxGV Features Ultra High Efficiency (Up to 93.5%) Programmable ConstantCurrent Output DMX512 Dimmable Standby Power 1 W Input surge protection: 4kV lineline, 6kV lineearth AllAround Protection:

More information

OPTOTRONIC LED Power Supply

OPTOTRONIC LED Power Supply www.osram.us/optotronic OPTOTRONIC LED Power Supply OT1W/UNV/C/2DIM/P6 - Technical Specifications Electrical Specifications Input General Information Item Number 79368 Type Constant Current Output Power

More information

LED Driver Linear / area dimming

LED Driver Linear / area dimming Driver LC 75W 900 1800mA 54V 0-10V lp EXC UNV EXCITE series SELV (US applications) Product description Constant current LED Driver Dimmable via 0... 10 V interface Dimming range 1 100 % Adjustable output

More information

Note1: Typ. efficiency is 230VAC and full load 12VDC 24VDC 48VDC ms 8ms 16ms 80ms

Note1: Typ. efficiency is 230VAC and full load 12VDC 24VDC 48VDC ms 8ms 16ms 80ms Features Regulated Converters Universal Input 9-264V Efficiency Up To 86% Short Circuit And Over Voltage/Current Protected UL/EN695 Certified, CE Marked Conformal Coated Product RECOM Connector Set Available

More information

Universal Power Supplies

Universal Power Supplies , Features Universal input: 90 264 VAC or 120 30 VDC Active power factor correction (>0.95) High efficiency up to 93% Load share function for up to 3 units in parallel Adjustable output voltage EMI/EMC

More information

Output Voltage Range. Parameter Min. Typ. Max. Notes. Leakage Current ma IEC ; 240Vac/ 60Hz

Output Voltage Range. Parameter Min. Typ. Max. Notes. Leakage Current ma IEC ; 240Vac/ 60Hz LMT080SxxxSTF Features 80W Nonisolated IP20 Driver Ultra High Efficiency (Up to 94.0%) Adjustable Output Current (AOC) with External Resistor Full Power at Wide Output Current Range (Constant Power) Flicker

More information

Universal input VAC <150mW No load power consumption

Universal input VAC <150mW No load power consumption Features Regulated Converter Description Universal input 85-64VAC

More information

Series AMEL20-AZ 20 Watt AC-DC / DC-DC Converter

Series AMEL20-AZ 20 Watt AC-DC / DC-DC Converter FEATURES: Click on Series name for product info on aimtec.com Models Single output Model Input Voltage (/Hz) Input Voltage (VDC) Max wattage (W) Voltage (V) Current max (A) Maximum capacitive load (µf)

More information

OPTOTRONIC LED Power Supply

OPTOTRONIC LED Power Supply www.osram.us/optotronic OPTOTRONIC LED Power Supply OT1W/347-4V/125C/2DIM/P6 Technical Specifications Electrical Specifications Input General Information Item Number 7927 Type Constant Current Output Power

More information

OPTOTRONIC LED Driver

OPTOTRONIC LED Driver www.osram.us/optotronic OPTOTRONIC LED Driver OTi55W Gen2 Programmable Technical Specifications General Information Electrical Specifications Item Number(s) Type Output Power Programming Tool Programmable

More information

275 Watt Medical Ultra low profile

275 Watt Medical Ultra low profile 127 x 76 x 19 mm Form factor 275 Watts with Forced Air Cooling Approval to EN60601 3rd Edition Efficiencies upto 92% -40 to 70 degree operating temperature* Dual fusing Electrical Specifications 12V /

More information

Electrical Specifications VAC/390 VDC, Universal (Derate from 100% at 100V AC to 90% at 90V AC)

Electrical Specifications VAC/390 VDC, Universal (Derate from 100% at 100V AC to 90% at 90V AC) WLP350 Industrial Features 5 x 3 x 1 Inches Form factor 350 Watts with Forced Air Cooling & 200 Watts Convection Cooling Efficiencies upto 94% -40 to 70 degree operating temperature* 12V / 0.5A Fan Output,

More information

Model Number AC-60CD1.4APPU

Model Number AC-60CD1.4APPU ELECTRICAL SPECIFICATIONS: Programmable, Digital, Wide-Range Ajustable Current & Dimming Class P Listed Constant Current LED Driver Model Number AC-6CD.4APPU Input Voltage: 2-277V Input Frequency: 5/6Hz

More information

H HOLUX Kft. H-1135 Budapest, Béke u Tel: (06 1) Fax: (06 1)

H HOLUX Kft. H-1135 Budapest, Béke u Tel: (06 1) Fax: (06 1) EBS040SxxxBTE Rev.C 40W Class I/II Programmable IP20 Driver with DALI Features High Efficiency (Up to 89.5%) Full Power at Wide Output Current Range (Constant Power) Thermal Sensing and Protection for

More information

Electrical Specifications

Electrical Specifications Electrical Specifications 913701213402 Max. Output Power (W) Output Voltage (V) Output Current (A) Tcase Max Max Input Current at 120V (A) Max. Input Power (W) Inrush Current (A pk - 50% µ s) Max. THD

More information

PART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1

PART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1 Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE T A H 450 U S 12 - F2 Application Package Dimension Output Input Output Output Protection

More information