DIGITAL INDICATORS S_DIAL

Size: px
Start display at page:

Download "DIGITAL INDICATORS S_DIAL"

Transcription

1 DIGITAL IDICATORS S_DIAL The electronic indicators are equipped with a linear sensor and an engraved scale glued on the measuring spindle. A sensor replaces the gears. The analogic display is transformed into a digital display. The SYLVAC electronic indicator program covers the entire range of mechanical indicators with resolutions 0.1 to mm and measuring range up to 150mm, and with much better accuracy. Sylvac inductive measuring system (patented) Data output Power supply: Lithium battery 3V, Type CR 2032 Operational temperature: +5 to +40 C mm/inch conversion 37

2 SUMMARY OF ALL TYPES S233 S234 S_Dial OE S_Dial BASIC RAGE 0.5 mm 0.8 mm 5 mm 12.5 mm 25 mm 50 mm 100 mm 150 mm RESOLUTIO 0.01 mm mm mm MECHAIC Diameter 8 mm h6 Diameter 25mm g7 Dove tail M1.4 contact point M2.5 contact point Rubber boot IP65 (IEC 60529) IP67 (IEC 60529) DIAL Diameter 44 mm Diameter 60 mm Rotating Vertical display FUCTIOS mm/inch Preset Preset onmin/max Measuring direction Hold Min / Max / Delta Tolerances Function (ABS) Absolute system* Auto off Analog display Setting by PC Programmable menus Powered by connector Multiplication factor * description on page 5 38

3 S_Dial SUMMARY OF ALL TYPES ADVACED ADVACED IP67 BLUETOOTH Smart AO & AO BT AALOG S_Dial PRO BASIC RAGE 0.5 mm 0.8 mm 5 mm 12.5 mm 25 mm 50 mm 100 mm 150 mm RESOLUTIO 0.01 mm mm mm MECHAIC Diameter 8 mm h6 Dove tail M1.4 contact point M2.5 contact point Rubber boot IP65 (IEC 60529) IP67 (IEC 60529) DIAL Diameter 44 mm Diameter 60 mm Rotating Vertical display FUCTIOS mm/inch Preset Preset on Min/Max Measuring direction Hold Min / Max / Delta Tolerances Absolute system* Auto off Analog display BLUETOOTH Smart Setting by PC Programmable menus Powered by connector Multiplication factor * description on page

4 Digital test indicators DESCRIPTIO S_Dial S234 Digital and analog display Water and coolant resistant Data output RS 232 combined with external power Automatic switch OFF Stem Ø 8 mm and dovetail back Rotating display over 360 Digital display LCD, Height of digits 6 mm Polyamide case, rotating display over 360 Zero setting by turning the case Analog display Measuring insert with tungsten carbide ball Ø 2 mm, movable over 270, interchangeable, M

5 Digital test indicators S_Dial S234 DIMESIOAL DRAWIG X 5:1 L 9.2 X 37 TECHICAL SPECIFICATIOS Measuring range Probe length mm mm Max Error fe µm Hysteresis fu µm Resolution mm Repeatability µm Measuring force Weight Protection rating according to IEC S_Connect : Power Zero setting min / max / delta display Analog scale range ratio Selection of resolution Preset 1) ± 1 digit 2) see cables chapter ) 4 1) ± 15% 0.07 ± 15% IP65 USB / RS232 / Wireless 2) max

6 Digital test indicators S_Dial S234 DISPLAY Direct mm/inch conversion Analog display Min/max/delta mode Analogic resolution display Zero setting BASIC ISTRUMET Instrument according to technical specifications Lithium battery CR2032 included Instruction manual Stem Ø 8 mm APPLICATIOS Run-out measurement Checking the alignment on milling machine. 42

7 43

8 Mini digital indicators DESCRIPTIO S_Dial S233 Compact, small diameter (Ø44 mm) Water and coolant resistant, protection rating IP65 according to IEC Data output RS 232 combined with external power supply. Interchangeable contact point M2.5 Clamping stem Ø 8-h6 of hardened and ground stainless steel. Dovetail back Automatic power shut down Standard Analog Vertical Polyamide case, fi xed display Digital display LCD, Height of digits 6 mm Clamping Ø 8-h6 Stainless steel measuring pin, ground Interchangeable contact point, stainless steel with TC ball Rubber boot on protected version

9 Mini digital indicators DIMESIOAL DRAWIGS S_Dial S233 Standard Analog Vertical S = standard P = protected 45

10 Mini digital indicators TECHICAL SPECIFICATIOS S_Dial S233 Measuring range mm Display 90 Analog scale Resolution mm Execution 3) Max. Error fe µm Repeatability µm Measuring force Zero setting REL and ABS measurement Resolution selection PRESET = (max. 130 mm) Min / max / delta display Selection of measuring direction S_Connect : Power S S S P 10 1) ) ) ) ) USB / RS232 / Wireless 4) Measuring range mm Analog scale Resolution mm Execution 3) Max. Error fe µm Repeatability µm Measuring force Zero setting REL and ABS measurement Resolution selection PRESET = (max. 130 mm) Min / max / delta display Selection of measuring direction Multiplication factor S_Connect : Power S P S P S 10 1) 10 1) USB / RS232 / Wireless 4) 1) ± 1 digit 2) Values ± 20%, indicator in vertical position, outgoing measuring spindle 3) S = Standard P = Protected 4) see cables chapter 46

11 Mini digital indicators S_Dial S233 BASIC ISTRUMET Instrument according to technical specifications Lithium battery CR2032 included Instruction manual Calibration certificate for instruments with resolution mm MEASURIG FORCE FOR RAGE 12.5 mm Standard Low 1) High 1) S P Tolerance ±20%, indicator in vertical position, spindle in outgoing measurement. 1) on request APPLICATIOS Checking of an internal Ø with a mechanical device Measurent of the vertical displacement of an element Measurement of internal chamfer 47

12 DESCRIPTIO BASIC Robust construction Water and coolant resistant Standard functions (mm/inch, preset 3), direction of measurement) Automatic wake-up and sleeping mode (S.I.S system), absolute System* Lifting cap PROXIMITY data output Version resolution Version 0.01 resolution Programmable according to your needs Plastic case External power supply and data transfer using one cable only Hardened steel clamping Ø 8-h6 Reinforced clamping shaft Interchangeable contact point M2.5, stainless steel with TC ball * description on page 5 48

13 DIMESIOAL DRAWIGS BASIC A Ø12 B C B C A n 8h6 S 2 Ø4 Ø5 (150mm) TECHICAL SPECIFICATIOS Measuring range mm Resolution mm Max. Error fe µm 10 1) ) ) 7 Repeatability Model type 2) µm 2 S A B C S_Connect : Proximity / Power Programmable by PC USB / RS232 / Wireless Standard functions (customized by PC) mm/inch, preset 3) (max ), direction of measurement 1) ± 1 digit 2) S = Standard 3) Preset configuration only by PC BASIC ISTRUMET MEASURIG FORCE Instrument according to technical specifications Lithium battery CR2032 included Instruction manual Calibration certificate for instruments mm Standard Low 3) High 3) 49 S 12.5 S 25 S Tolerance ± 20%, spindle in outgoing measurement position. 23 on request

14 DESCRIPTIO ADVACED Robust construction Water and coolant resistant ew technology with configurable menus Broad choice of functions (MI/MAX/DELTA, TOL, Factor, PRESET, AUTO OFF, etc.) Automatic wake-up and sleeping mode (S.I.S system), absolute System* Maximum error of 3 µm PROXIMITY data output Lifting cap Large display with integrated LEDs tolerances Optional lifter Aluminium case rotating display over 270 Programmable according to your needs External power supply and data transfer using one cable only Interchangeable contact point M2.5, stainless steel with TC ball Reinforced clamping shaft Hardened steel clamping Ø 8-h6 * description on page 5 50

15 DIMESIOAL DRAWIGS ADVACED A Ø12 C C A B 7 B Buttom view 2 n 8h6 Ø4 Ø5 (150mm) 19 Ø58 S mm S mm TECHICAL SPECIFICATIOS Measuring range Resolution Max. Error fe Repeatability Model type 2) A B C S_Connect : Proximity / Power Programmable by PC Standard functions (customized by PC) 1) ± 1 digit 2) S = Standard mm mm µm 10 1) ) ) ) ) 10 µm 2 mm mm mm S USB / RS232 / Wireless mm/inch, ref I/II, preset (max ) min/max/delta, toleances, resolution, direction of measurement, multiplication factor, automatic or manual switch off, key lock BASIC ISTRUMET MEASURIG FORCE Instrument according to technical specifications Lithium battery CR2032 included Instruction manual Calibration certificate for instruments mm Standard Low 2) High 2) Tolerance ± 20%, spindle in outgoing measurement position. 2) on request 51

16 DESCRIPTIO ADVACED IP67 Robust construction Water and coolant resistant Protection rating IP67 according to IEC 60529, even connected ew technology with configurable menus Broad choice of functions (MI/MAX/DELTA, TOL, Factor, PRESET, AUTO OFF, etc.) Automatic wake-up and sleeping mode (S.I.S system), absolute System Maximum error of 3 µm PROXIMITY data output Brake valve Large display with integrated LEDs tolerances Dust cover Aluminium case rotating display over 270 Programmable according to your needs External power supply and data transfer using one cable only Interchangeable contact point M2.5, stainless steel with TC ball Reinforced clamping shaft Hardened steel clamping Ø 8-h * description on page 5 52

17 DIMESIOAL DRAWIGS ADVACED IP67 B B C A A P mm P 50mm TECHICAL SPECIFICATIOS Measuring range Resolution Max. Error fe Repeatability Model type 2) IP67 (IEC 60529) A B C S_Connect : Proximity / Power Programmable by PC Standard functions (customized by PC) 1) ± 1 digit 2) P= Protected mm mm µm µm 2 P mm mm mm USB / RS232 / Wireless mm/inch, ref I/II, preset (max ) min/max/delta, toleances, resolution, direction of measurement, multiplication factor, automatic or manual switch off, key lock BASIC ISTRUMET MEASURIG FORCE Instrument according to technical specifications Lithium battery CR2032 included Instruction manual Calibration certificate for instruments mm Standard Low 2) High 2) 53 P 12.5 P 25 P Tolerance ± 20%, spindle in outgoing measurement position. 2) on request

18 DESCRIPTIO BLUETOOTH SMART IP67 Integrated data transmission Robust construction Protection rating IP67 according to IEC 60529, even connected Water and coolant resistant ew technology with configurable menus Broad choice of functions (MI/MAX/DELTA, TOL, Factor, PRESET, AUTO OFF, etc.) Automatic wake-up and sleeping mode (S.I.S system), absolute System* Maximum error of 3 µm PROXIMITY data output Large display with integrated LEDs tolerances Lifting cap Optional lifter Aluminium case rotating display over 270 Programmable according to your needs External power supply and data transfer using one cable only Reinforced clamping shaft Hardened steel clamping Ø 8-h Interchangeable contact point M2.5, stainless steel with TC ball * description on page 5 54

19 DIMESIOAL DRAWIGS BLUETOOTH SMART IP67 A Ø12 C C 25.4 A B B 19 2 Ø4 Ø5 (150mm) 7 19 Buttom view S S n 8h6 19 Ø TECHICAL SPECIFICATIOS Measuring range Resolution Max. Error fe Repeatability Model type 1) IP67 (IEC 60529) A B C S_Connect : Proximity / Power Programmable by PC Standard functions (customized by PC) 1) S = Standard mm mm µm µm 2 S mm mm mm USB / RS232 / BLUETOOTH Smart* mm/inch, ref I/II, preset (max ) min/max/delta, toleances, resolution, direction of measurement, multiplication factor, automatic or manual switch off, key lock * 100% compatible with BLUETOOTH Smart dongle See page 6 for availability according to the country BASIC ISTRUMET MEASURIG FORCE Instrument according to technical specifications Lithium battery CR2032 included Instruction manual Calibration certificate for instruments mm Standard Low 2) High 2) Tolerance ± 20%, spindle in outgoing measurement position. 2) on request 55

20 DESCRIPTIO AALOG Adaptive analog display (up to 0.2 µm per segment) Robust construction Water and coolant resistant ew technology with configurable menus Broad choice of functions (MI/MAX/DELTA, TOL, Factor, PRESET, AUTO OFF, etc.) Automatic wake-up and sleeping mode (S.I.S system), absolute System* Maximum error of 3 µm PROXIMITY data output Lifting cap Quick access to tolerances limits and analog resolution Large display with integrated LEDs tolerances and analog scale Programmable according to your needs External power supply and data transfer using one cable only Hardened steel clamping Ø 8-h6 Aluminium case rotating display over 270 Reinforced clamping shaft Interchangeable contact point M2.5, stainless steel with TC ball * description on page

21 DIMESIOAL DRAWIGS AALOG B C A S TECHICAL SPECIFICATIOS Measuring range Resolution Max. Error fe Repeatability Model type 1) A B C mm mm µm 3 4 µm 2 S mm mm mm S_Connect : Proximity / Power Programmable by PC Standard functions (customized by PC) USB / RS232 mm/inch, ref I/II, preset (max ) min/max/delta, toleances, resolution, direction of measurement, multiplication factor, automatic or manual switch off, key lock 1) S = Standard BASIC ISTRUMET MEASURIG FORCE Instrument according to technical specifications Lithium battery CR2032 included Instruction manual Calibration certificate Standard Low 2) S 12.5 S High 2) Tolerance ± 20%, spindle in outgoing measurement position. 2) on request 57

22 DESCRIPTIO AO & AO BLUETOOTH 0,1 µm resolution Robust construction Water and coolant resistant ew technology with configurable menus Broad choice of functions (MI/MAX/DELTA, TOL, Factor, PRESET, AUTO OFF, etc.) Automatic wake-up and sleeping mode (S.I.S system), absolute System* Maximum error of 1.8 µm PROXIMITY data output Lifting cap Large display with integrated LEDs tolerances Programmable according to your needs External power supply and data transfer using one cable only Hardened steel clamping Ø 8-h6 Aluminium case rotating display over 270 Reinforced clamping shaft Interchangeable contact point M2.5, stainless steel with TC ball Max error 1.8 µm Repeatability 0,5 µm * description on page 5 58

23 DIMESIOAL DRAWIGS AO & AO BLUETOOTH B C A TECHICAL SPECIFICATIOS S Measuring range Resolution Max. Error fe Repeatability Model type 1) A B C S_Connect : Proximity / Power Programmable by PC Standard functions (customized by PC) 1) S = Standard mm mm µm µm 0.5 mm mm mm USB / RS232 S USB / RS232 / BLUETOOTH Smart* mm/inch, ref I/II, preset (max ) min/max/delta, toleances, resolution, direction of measurement, multiplication factor, automatic or manual switch off, key lock * 100% compatible with BLUETOOTH Smart dongle See page 6 for availability according to the country BASIC ISTRUMET MEASURIG FORCE Instrument according to technical specifications Lithium battery CR2032 included Instruction manual Calibration certificate Standard Low 2) High 2) 59 S 12.5 S Tolerance ± 20%, spindle in outgoing measurement position. 2) on request

24 DESCRIPTIO Resolution of 0.1 µm Broad choice of functions (MI/MAX/DELTA, TOL, Facteur, PRESET, AUTO OFF, etc.) Max error 1.5 µm / 50mm Constant measuring force (depending on model) Clamping stem ø8 or ø25 (depending on model) Mixed ceramic bearing / ball bearing system Measuring system with homing Battery life : 2 years! Data output PROXIMITY and POWER S_Dial PRO BASIC Data output PROXIMITY Large display with integrated LEDs tolerances Aluminium case rotating display over 270 Customizable button Clamping ø25 - g7 Stainless steel chrome CR2032 battery or external power combined with data output POWER Aluminium tube Clamping ø8 - h6 Stainless hardened steel Lifter

25 DIMESIOAL DRAWIGS S_Dial PRO BASIC 34.2 Ø Ø 25g Ø Ø 8h6 Ø 5 Ø 25 7 TECHICALS SPECIFICATIOS Measuring range Resolution Max. Error fe Repeatability S_Connect : Proximity /Power Programmable by PC Clamping Spring Measuring force Standard functions (customized by PC) mm 50 mm µm 1.5 µm 0.2 USB / RS232 ø8 h6 ø25 g7 ø8 h6 ø25 g7 1) ) ) 1) Model without spring : Constant measuring force, use only in a vertical position 2) The values agree within ± 20% (vertical down, measuring rod outgoing) mm/inch, ref I/II, preset (max ) min/max/delta, tolerances, resolution, measuring direction, multiplier, automatic extinction/manual, keylock ISTRUMET DE BASE Instrument according to technical specifications Lithium battery CR2032 included Lifter included Manual Calibration certificate 61

26 DESCRIPTIO S_Dial OE Strong construction Water and coolant resistant, protection rating IP67 according to IEC 60529, even connected Increased accuracy to 5 µm Automatic switch-off Data output Proximity Lifting device integrated (left or right) in standard for versions 12.5 and 25 mm (optional for version 50mm) External power supply and data transfer using one cable only RS-Power Clamping Ø 8-h6 Digital display LCD, height of digits 10,5 mm Interchangeable contact point, stainless steel with TC ball

27 DIMESIOAL DRAWIGS S_Dial OE Ø19 Ø19 Ø60 course 12.5 = 52.3 course 25 = 65.5 Ø Ø 8 h Ø 8 h course 12.5 = 73.7 course 25 = TECHICAL SPECIFICATIOS Measuring range Resolution Max. Error fe mm mm µm 10 1) ) Repeatability µm 2 S_Connect : Proximity / Power Programmable by PC Zero setting Preset Selection of measuring direction USB / RS232 / Wireless max ) ± 1 digit BASIC ISTRUMET MEASURIG FORCE Instrument according to technical specifications Lithium battery CR2032 included Instruction manual Calibration certificate for instruments mm Ultra-high * - - Tolerance ± 20%, spindle in outgoing measurement position. * Be careful, do not pull and release quickly the lifting cap, otherwise it will unhooks. Only with Spring SPM Standard Increased

28 APPLICATIOS S_Dial Measurement of a span with equipped with measuring ball probe Indicator, range 150 mm on stand mounted on a Sylvac PS15 bench BLUETOOTH SMART working in duplex mode and connected to D300S to measure concentricity, roundness, etc. connected to a PLC Analog used on bore gauge system 64

29 LIFTIG DEVICES S_Dial Lower lifting lever, type Upper lifting device type Pneumatic lifting device type Vacuum lifting device type Lifting device with photo-cable type Lifting device type Upper lifting lever type,

30 ACCESSORIES S_Dial Contact points M2.5 S233 S234 ( ) S234 ( ) 12,5-25 mm mm S_Dial OE R M2.5 M Ø7.7 Ø Short probe, TC ball Short standard probe, TC ball Short probe, TC ball Long probe, TC ball Long standard probe, TC ball Long probe, TC ball 66

31 Clamping stem Clamping stem Spanner for probe ) ) n ) 1) S233 S234 12,5-25 mm mm S_Dial OE 1 Digital indicators S_Dial ACCESSORIES Lifting device, range 12.5 mm Lifting device, range 25 mm Lifting device, range 50 mm Lifting device, range 12.5 mm Lifting device, range 25 mm Lug back Lug back ) Excepted Basic 67

32 ACCESSORIES S_Dial S233 S234 12,5-25 mm mm S_Dial OE Lifting device Upper lifting device Lifting device with photo-cable Pneumatic lifting device with foot pedal Lifter only for Pneumatic foot pedal for Vacuum lifting device with foot pedal Ø4/2 L=2m Pressure controller Ø6/4 L=2m Vacuum foot pedal for

33 ACCESSORIES S_Dial S233 S234 12,5-25 mm mm S_Dial OE Dust protection for indicator, range 12.5 mm Dust protection for indicator, range 25 mm Depth measuring base Snap connector for pneumatic lifter x Snap connector for pneumatic lifter x Center lug back 69

34 ACCESSORIES S_Dial Ø8 1) 1) 1) 1) Lower lifting device, range 12.5 mm 10 4 S233 S234 12,5-25 mm mm S_Dial OE Upper lifting device for S (Standard) execution, except vertical type Pneumatic lifting device for standard type 1) used on range 20 mm max 70

35 71

36 Measuring stands DESCRIPTIO A selection of universal measuring stands for fixing all probes, test indicators and dial gauges Clamping on Ø 8 mm or dovetail on magnetic stand Threaded column for height positioning accuracy Articulated arm Fine adjustment Magnetic base Granite base Ceramic base 72

37 Measuring stands TECHICAL SPECIFICATIOS Base magnetic 1) granite grade 00 granite grade 00 cast iron, ceramic table granite grade 00 granite grade 00 Base dimensions 70x46x65 mm 100x150x40 mm 200x130x40 mm 85x85x25 mm 240x140x50mm 300x210x60 Central locking 1 handle Column --- Steel Ø 20 mm Steel Ø 20 mm Chr.st. Ø 25 mm Hard Chr. Ø 35 mm Hard Chr. Ø 35 mm Clamping dimension Ø 8 mm Ø 8 mm Ø 8 mm Ø 8 mm Ø 8 mm Ø 8 mm Dist. Column.-meas. point mm 60 mm 78 mm 67 mm 100 mm Measuring range mm mm mm mm mm Total height 430 mm 240 mm 240 mm 215 mm 280 mm 360 mm Weight 2.2 kg 2.6 kg 2.6 kg 4.3 kg 8 kg 16 kg Fine adjustment 1) Gripping coefficient :

S_Cal EVO. Professionnal Caliper DESCRIPTION

S_Cal EVO. Professionnal Caliper DESCRIPTION Professionnal Caliper DESCRIPTION S_Cal EVO Integrated data transmission New extra-large display Prograable button according to your needs Water protected for heavy-duty work with coolants and lubricants,

More information

d for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529, even connected absolute system S_Connect Proximity

d for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529, even connected absolute system S_Connect Proximity HAND TOOLS In 1981, Sylvac launches the first caliper with digital read-out on the market. Quickly, other models followed and the market of these handtools took an incredible rise. Sylvac did not remain

More information

HEIGHT GAUGE Hi_Cal & Hi_Gage ONE

HEIGHT GAUGE Hi_Cal & Hi_Gage ONE HEIGHT GAUGE & Hi_Gage ONE Specially developed and optimized for use in production lines, HI_CAL offers a great efficiency thanks to its large screen which can simultaneously display diameters and centerlines.

More information

S_Cal PRO. Professionnal Caliper DESCRIPTION

S_Cal PRO. Professionnal Caliper DESCRIPTION HND TOOLS In 1981, Sylvac launched the first caliper with digital read-out on the market. Quickly, other models followed and the market of these handtools took an incredible rise. Today, Sylvac remains

More information

HEIGHT GAUGE Hi_Cal 150 / 300

HEIGHT GAUGE Hi_Cal 150 / 300 HEIGHT GAUGE 150 / 300 Especially developed and optimized for use in production lines, HI_CAL offers a great efficiency thanks to its large screen which can simultaneously display diameters and centerlines.

More information

Summer Promo Precision Tool & Instruments Prices effective July 1st through Sept. 30th, Unless noted otherwise

Summer Promo Precision Tool & Instruments Prices effective July 1st through Sept. 30th, Unless noted otherwise S u m m e r 2 0 1 4 S p e c i a l s Summer Promo 2014 Precision Tool & Instruments Prices effective July 1st through Sept. 30th, 2014. Unless noted otherwise Season 2014 S u m m e r 2 0 1 4 S p e c i

More information

MICROMETERS. Traditional External Micrometer 1961 Series. Traditional External Micrometer 1965 Series. For more information visit

MICROMETERS. Traditional External Micrometer 1961 Series. Traditional External Micrometer 1965 Series. For more information visit Traditional External Micrometer 1961 Series Standard: BS870, DIN 863/1, ISO361 All models feature Tungsten carbide measuring faces 6.5mm spindle diameter Speeder type ratchet Locking lever Choice of standard

More information

HEIGHT GAUGES. Moore & Wright Vernier Height Gauge 190 Series. Digital Mini Height Gauge 192 Series. Partners in Precision

HEIGHT GAUGES. Moore & Wright Vernier Height Gauge 190 Series. Digital Mini Height Gauge 192 Series. Partners in Precision Moore & Wright Vernier Height Gauge 190 Series Zero reference point can be adjusted for calibration Hardened stainless steel beam Measuring faces are micro-lapped for high accuracy Chrome plated scale

More information

No Gimmicks No Hurdles

No Gimmicks No Hurdles LIFETIME WARRANTY No Gimmicks No Hurdles e s n e s n o N o N We are proud to announce another industry first for Fowler. In our 67th year as a familyowned, independent USA metrology company, Fowler continues

More information

d for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529, even connected Absolute System S.I.

d for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529, even connected Absolute System S.I. HND TOOLS In 1981, Sylvac launched the first caliper with digital read-out on the market. Quickly, other models followed and the market of these handtools took an incredible rise. Today, Sylvac remains

More information

Indicator not included

Indicator not included Baty Dual Plane Digital Height Gauge Range up to 0-600mm Measures offset components Can be used as an ordinary digital caliper Easy to use clear readout Large ground face to ensure component square when

More information

mm range nonius mm/inch mm range nonius mm/inch

mm range nonius mm/inch mm range nonius mm/inch Measuring tools Vernier Calipers MIB Messzeuge Germany Precision micrometers Dial indicators Dial supports Magnetic dial supports Digital thickness gauges Precision inside micrometers Vernier caliper standard

More information

d for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529, even connected Absolute System S.I.

d for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529, even connected Absolute System S.I. HND TOOLS In 1981, Sylvac launched the first caliper with digital read-out on the market. Quickly, other models followed and the market of these handtools took an incredible rise. Today, Sylvac remains

More information

Digital Indicators 1075 / 1080 / Features. Technical Data IP MarCator. Digital Indicators

Digital Indicators 1075 / 1080 / Features. Technical Data IP MarCator. Digital Indicators - 5-38 Digital Indicators 175 / 18 / 181 IP51 Features Functions: ON/OFF (Set display to zero) mm/inch Reversal of counting direction PRESET (for entering a numerical value) DATA (data transmission with

More information

Micrometers / Micrometer heads

Micrometers / Micrometer heads Micrometers / Micrometer heads of micrometers according DIN 863 Max. permissible range () errors (µm) 0-25 4 25-50 4 50-75 5 75-100 5 100-125 6 125-150 6 150-175 7 175-200 7 200-225 8 225-250 8 250-275

More information

No Gimmicks No Hurdles No Nonsense

No Gimmicks No Hurdles No Nonsense No Gimmicks No Hurdles No Nonsense We are proud to announce another industry first for Fowler. In our 67th year as a familyowned, independent USA metrology company, Fowler continues to lead the way. NEW!

More information

S_Cal PRO. Caliper. Proximity output data! DESCRIPTION PROXIMITY

S_Cal PRO. Caliper. Proximity output data! DESCRIPTION PROXIMITY HND TOOLS In 1981, Sylvac launched the first caliper with digital read-out on the market. Quickly, other models followed and the market of these handtools took an incredible rise. Today, Sylvac remains

More information

CALIPERS. Workshop Vernier Caliper 100 Series. Large Workshop Vernier Caliper 150 Series. Partners in Precision

CALIPERS. Workshop Vernier Caliper 100 Series. Large Workshop Vernier Caliper 150 Series. Partners in Precision Workshop Vernier Caliper 100 Series Standard DIN 862 Standard workshop model with stop screw Assembly slider model 4-way measurement Made of hardened alloyed stainless steel Chromed scale with engraved

More information

MarCator. Dial and Digital Indicators

MarCator. Dial and Digital Indicators MarCator. Digital and Dial Indicators MarCator. Dial and Digital Indicators Digital Indicators Overview 5-2 MarCator 175 R Standard versions with digital display 5-4 MarCator 186 R / 186 WR With tolerance

More information

Thickness Gages SERIES 547, 7

Thickness Gages SERIES 547, 7 Thickness Gages SERIES 547, 7 Thickness Gages offer a quick and efficient means of inspection with their convenient grip handle, thumb trigger and springloaded spindle. The various models cover a wide

More information

PRECISION MEASURING INSTRUMENTS

PRECISION MEASURING INSTRUMENTS PRECISION MEASURING INSTRUMENTS STANDARD GAGE PROFESSIONNEL MEASURING INSTRUMENTS AFFORDABLE TO EVERYONE The instruments of the STANDARD GAGE product line were created to satisfy the clients on their query

More information

STANDARD GAGE ACTION CONTENT. 03 Calipers Depth Calipers Micrometers Depth Micrometers Tool Sets Dial Gauges...

STANDARD GAGE ACTION CONTENT. 03 Calipers Depth Calipers Micrometers Depth Micrometers Tool Sets Dial Gauges... STANDARD GAGE ACTION CONTENT 03 Calipers... 09 Depth Calipers... 12 Micrometers... 15 Depth Micrometers... 16 Tool Sets... 17 Dial Gauges... 18 Lever Indicators... 19 Caliper Gauges... 19 Dial Bore Gauges...

More information

Head office. Sales offices. ISRAEL NOGA Engineering Ltd. Tel: Fax:

Head office. Sales offices. ISRAEL NOGA Engineering Ltd. Tel: Fax: C A T A L O G Head office ISRAEL NOGA Engineering Ltd. Tel: 972-4-9808080 Fax: 972-4-9808638 noga@noga.com www.noga.com Sales offices ISRAEL NOGA Tools Tel: 972-9-835-3243 Fax: 972-9-835-3307 nogatools@nogatools.co.il

More information

DIGICO 1 and 2 Electronic Indicators Both models are remarkable for their versatile functions, large measuring span and high accuracy.

DIGICO 1 and 2 Electronic Indicators Both models are remarkable for their versatile functions, large measuring span and high accuracy. DIGICO 1 and 2 Both models are remarkable for their versatile functions, large measuring span and high accuracy. LC display with colored background 6 digits plus minus sign.34" x.177"/ 9 x 4. mm digit

More information

DOES EVERYTHING ROTATE AROUND PRECISION? NO PROBLEM WITH MICROMAR.

DOES EVERYTHING ROTATE AROUND PRECISION? NO PROBLEM WITH MICROMAR. - s DOES EVERYTHING ROTATE AROUND PRECISION? NO PROBLEM WITH MICROMAR. Micrometers belong alongside calipers to the most frequently used hand measuring instruments. With their precision ground spindle,

More information

500 mm INTERNAL MEASURING INSTRUMENTS

500 mm INTERNAL MEASURING INSTRUMENTS INTERNAL MEASURING INSTRUMENTS SYLVAC offers a large range of internal measuring instruments made of interchangeable or points mechanical heads and electronic units with digital display, integrated in

More information

TESA UPD Gauge Block Comparator with a 25 mm Measuring Span

TESA UPD Gauge Block Comparator with a 25 mm Measuring Span TESA UPD Gauge Block Comparator with a 25 mm Measuring Span Direct measurement of gauge blocks with a variation in nominal length of up to 25 mm or 1 in. Allows the number of required reference gauge blocks

More information

Dial gauge testing stand M3

Dial gauge testing stand M3 Dial gauge testing stand M3 DESCRIPTION probes (like P10 and P50) (P10 calibrated on channel 1 and P50 calibrated on channel 2) Fast fixing by knob-pulley Delivered with inspection software SYCOPRO II

More information

YOUR STABLE PARTNER FOR MANUFACTURING. MARSTAND

YOUR STABLE PARTNER FOR MANUFACTURING. MARSTAND - YOUR STABLE PARTNER FOR MANUFACTURING. MARSTAND MarStand Indicator Stands, Comparator Stands and Run out Testing Instruments offer high stablity which ensures precise measurements; regardless of whether

More information

Electronic calipers Dial calipers Vernier calipers. External micrometers Internal micrometers Depth micrometers

Electronic calipers Dial calipers Vernier calipers. External micrometers Internal micrometers Depth micrometers CONTENT Calipers Electronic calipers Dial calipers Vernier calipers Depth calipers Special purpose calipers Calipers accessories A Micrometers External micrometers Internal micrometers Depth micrometers

More information

Electronic indicators, Dial Gauges, Precision Indicators

Electronic indicators, Dial Gauges, Precision Indicators Electronic indicators, Dial Gauges, Precision Indicators F-1 E LECTRONIC I NDICATORS AND D IAL G AUGES EASY-TO-USE AND VERSATILE As manufacturer of a full range of precision dial gauges for more than 50

More information

NEW WEBSITE SPC WW.INSIZE-UUSA.COM OMING SSOON! QUALITY INNOVATION SERVICE VALUE SERIALIZED TOOLS ONE-YEAR WARRANTY FITTED CASES. Electronic Calipers

NEW WEBSITE SPC WW.INSIZE-UUSA.COM OMING SSOON! QUALITY INNOVATION SERVICE VALUE SERIALIZED TOOLS ONE-YEAR WARRANTY FITTED CASES. Electronic Calipers Precision Measuring Instruments Instrument s QUALITY Electronic Calipers INNOVATION SERVICE EDP # Item # VALUE 0-6/0-150 817000 1108-150 0-8/0-200 817001 1108-200 80.00 SERIALIZED TOOLS 0-12/0-300 817002

More information

نﺎﻤﻟ آ ﻲﻧﺎﭙﻤﻛ يرﺎﺼﺤﻧا هﺪﻨﻳﺎﻤﻧ

نﺎﻤﻟ آ ﻲﻧﺎﭙﻤﻛ يرﺎﺼﺤﻧا هﺪﻨﻳﺎﻤﻧ ا زما صنعت گراد Mahr - your stable partner for manufacturing. Marstand. The latest information on MARSTAND products can be found on our website: www.mahr.com, WebCode 210 marstand Indicator Stands, Comparator

More information

INSTRUCTIONS FOR USE UNIVERSEL DIAL GAUGE. Fabrique d'instruments de mesure de précision. Chemin du Closalet 16 Case Postale 1023 Crissier/Suisse

INSTRUCTIONS FOR USE UNIVERSEL DIAL GAUGE. Fabrique d'instruments de mesure de précision. Chemin du Closalet 16 Case Postale 1023 Crissier/Suisse INSTRUCTIONS FOR USE DIAL GAUGE UNIVERSEL Fabrique d'instruments de mesure de précision Chemin du Closalet 16 Case Postale 1023 Crissier/Suisse Tél. (021) 635 11 74 Fax (021) 634 54 71 Contents INSTRUCTION

More information

SPECIAL PROMOTIONS! Summary. Swiss manufacturer of precision measuring instruments since 1969

SPECIAL PROMOTIONS! Summary. Swiss manufacturer of precision measuring instruments since 1969 Swiss manufacturer of precision measuring instruments since 1969 µ_prices Validity 01.01.14-31.12.14 Summary S_Cal PRO & S_Cal PRO µm p.2 S_Cal UL III p.3 S_Mike PRO p.4 S_Depth PRO p.5 X_TREME p.6 S_Dial

More information

Precision Bench Centres Page 338. Universal Bevel Protractors Pages 339 to 341, 357. Steel Squares and Rules Pages 342 to 346

Precision Bench Centres Page 338. Universal Bevel Protractors Pages 339 to 341, 357. Steel Squares and Rules Pages 342 to 346 Stands and Bench Tools Stands Pages 325 to 331 Magnetic Stands Pages 332 to 337 Precision Bench Centres Page 338 Universal Bevel Protractors Pages 339 to 341, 357 Steel Squares and Rules Pages 342 to 346

More information

Dial Gauge M 2 T. Accuracy according to DIN 878 Dimensions according to DIN EN ISO 463

Dial Gauge M 2 T. Accuracy according to DIN 878 Dimensions according to DIN EN ISO 463 Dial Gauge M 2 T Dial Gauge MU 52 T Strengthened rack-ø 5 mm Accuracy according to DIN 878 Dimensions according to DIN EN ISO 463 Dial Gauge M 2 TK Particularly clear reading due to concentrically positioned

More information

SPECIAL PROMOTIONS! Summary. Swiss manufacturer of precision measuring instruments since 1969

SPECIAL PROMOTIONS! Summary. Swiss manufacturer of precision measuring instruments since 1969 Swiss manufacturer of precision measuring instruments since 1969 µ_prices Validity 01.01.14-31.12.14 Summary S_Cal PRO & S_Cal PRO µm p.2 S_Cal UL III p.3 S_Mike PRO p.4 S_Depth PRO p.5 X_TREME p.6 S_Dial

More information

i-checker SERIES 170 Inspection Instrument for Dial Indicator

i-checker SERIES 170 Inspection Instrument for Dial Indicator i-checker SERIES 170 Inspection Instrument for Dial Indicator The i-checker is specially designed to calibrate dial indicators, dial test indicators, and other electronic comparison gage heads with a stroke

More information

Sliding Prices this Winter. Local Distributor. Supporting your. Large Workshop Vernier Caliper. Traditional Feeler Gauge Set.

Sliding Prices this Winter. Local Distributor. Supporting your. Large Workshop Vernier Caliper. Traditional Feeler Gauge Set. Supporting your Local Distributor Large Workshop Vernier Caliper See page 2 for details. Traditional Feeler Gauge Set See page 12 for details. Digital Indicator See page 8 for details. Issue 44 Valid until

More information

DIAL GAUGES. K-1

DIAL GAUGES.   K-1 DIAL GAUGES K-1 IP65 Digital Indicator IP65 Protection Level, against liquids. With large digital display. Preset function. ABS/INC. Tolerance setting and indication. Metric/inch conversion. Data output

More information

Height Gauges. Height Gauges K-1

Height Gauges. Height Gauges K-1 Height Gauges K-1 Made To Measure in the Course of the Manufacturing Process Height gauges perform one-dimensional measurements on a surface plate, preferably in granite. TESA-µHITE we offer to you in

More information

Auxiliary Equipment and Miscellaneous Stands, Bench Tools, Vices, V-Blocks, Plates, Protrectors, Levels, Squares, Rules, Spring Calipers Page 320

Auxiliary Equipment and Miscellaneous Stands, Bench Tools, Vices, V-Blocks, Plates, Protrectors, Levels, Squares, Rules, Spring Calipers Page 320 Auxiliary Equipment and Miscellaneous Stands, Bench Tools, Vices, V-Blocks, Plates, Protrectors, Levels, Squares, Rules, Spring Calipers Page 320 319 Gauge Stand with Hardened Steel Anvil Series 7 Standard

More information

ALL-INCLUSIVE, EASY TO USE

ALL-INCLUSIVE, EASY TO USE THE ESSENTIAL METROLOGY CATALOGUE 16/17 Partners in Precision Micrometers INNOVATIVE NEW PRODUCTS THROUGHOUT THIS ALL-INCLUSIVE, EASY TO USE REFERENCE INTRODUCTION ISO 9001:2015 Quality Guaranteed In 2016

More information

Dial gauges Electronic and Analogue

Dial gauges Electronic and Analogue Dial gauges Electronic and Analogue 1F-1 Dial gauges Electronic and Analogue EASY-TO-USE AND VERSATILE For more than 50 years we have been producing and distributing a wide range of easy-to-use and versatile

More information

CALIPERS. Workshop Vernier Caliper 100 Series. Workshop Vernier Caliper 105 Series. Features. Features

CALIPERS. Workshop Vernier Caliper 100 Series. Workshop Vernier Caliper 105 Series. Features. Features Workshop Vernier Caliper 100 Series Standard DIN 862 Standard workshop model with locking screw Made of hardened alloyed stainless steel Chromed scale with engraved graduations Packed in plastic box WORKSHOP

More information

NEW. Premium Micro Vickers Hardness Tester NOVA 240. See page 7 for details. NEW

NEW. Premium Micro Vickers Hardness Tester NOVA 240. See page 7 for details. NEW Special SPRING / SUMMER 2016 Valid until 30th September 2016 (subject to availability) www.bowersgroup.co.uk Offers Sylvac S_Cal EVO Bluetooth Caliper See page 5 for details. See Bowers Group at MACH 2016,

More information

Swiss manufacturer of precision measuring instruments since 1969 PROMOTIONS JULY - SEPTEMBER. Summer 2017

Swiss manufacturer of precision measuring instruments since 1969 PROMOTIONS JULY - SEPTEMBER. Summer 2017 Swiss manufacturer of precision measuring instruments since 1969 TIONS JULY - SEPTEMBER Summer 2017 Validity : 30.09.2017 200 EUR MARKET LEADING DIGITAL INDICATORS AT PREFERENTIAL PRICES ONE CONFIGURABLE

More information

YOUR MEASURING TASKS ARE SENSITIVE. MARTEST IS HIGHLY SENSITIVE.

YOUR MEASURING TASKS ARE SENSITIVE. MARTEST IS HIGHLY SENSITIVE. - and Touch Probes YOUR MEASURING TASKS ARE SENSITIVE. MARTEST IS HIGHLY SENSITIVE. Since 1936 Mahr is one of the leading global producers of test indicators, we have achieved this with the continuous

More information

Dial Gauge KM 4/5 T. of our Precision Dial Gauge series offer reliability, The well thought-out design, accurate components and robust construction

Dial Gauge KM 4/5 T. of our Precision Dial Gauge series offer reliability, The well thought-out design, accurate components and robust construction Dial Gauge M 2 T Dial Gauge M 2/30 T Range 30 mm Accuracy according to Käfer works standard Dial Gauge KM 4/5 T Range 5 mm Bezel-Ø 40 mm Precision Dial Gauges The well thought-out design, accurate components

More information

i-checker SERIES 170 SPECIFICATIONS DIMENSIONS F-54

i-checker SERIES 170 SPECIFICATIONS DIMENSIONS F-54 i-checker SERIES 170 EATURES The i-checker is specially designed to calibrate dial indicators, dial test indicators, and other electronic comparison gage heads with a stroke of up to 100mm (4"). ±(0.2+L/100)µm

More information

Bestsellers n 1. p.2 p.6 p.4 p.10

Bestsellers n 1. p.2 p.6 p.4 p.10 Bestsellers 2018 n 1 p.2 p.6 p.4 p.10 Validity: 1. 2. 2018 31. 7. 2018 2 S_Dial WORK Basic & Advanced Very easy to use Best ratio quality/price on the market Basic or advanced functions Data output Proximity/Power

More information

TABLE OF CONTENTS WARRANTY

TABLE OF CONTENTS WARRANTY WARRANTY ELECTROMATIC Equipment Co., Inc. (ELECTROMATIC) warrants to the original purchaser that this product is of merchantable quality and confirms in kind and quality with the descriptions and specifications

More information

Measuring instruments

Measuring instruments Vernier calipers 26804 Stainless steel - DIN 862 Range Jaw Nonius /inch 135 40 1/20-1/128 160 40 1/20-1/128 180 40 1/20-1/128 Until end of stock 26808 Stainless steel, chrome satin finish - DIN 862 Range

More information

MICRO-HITE 350 / 600 / 900 Height Gages MICRO-HITE main instruments 350 / 600 / 900

MICRO-HITE 350 / 600 / 900 Height Gages MICRO-HITE main instruments 350 / 600 / 900 Two-dimensional measurement operations are efficient and cost-effective with the MICRO-HITE Electronic Height Gage. The MICRO-HITE Electronic Height Gage measures in two dimensions in either rectangular

More information

Does everything rotate around precision? no problem with Micromar.

Does everything rotate around precision? no problem with Micromar. Does everything rotate around precision? no problem with Micromar. The latest information on MICROMAR products can be found on our website: www.mahr.com, WebCode 2 Micrometers belong alongside calipers

More information

Inch Dial Test Indicators Lever Type see page 97.

Inch Dial Test Indicators Lever Type see page 97. Dial Test Indicators Most modern methods are applied in the production of our high quality Dial Test Indicators. They are both sensitive and shock-resistant. Here are some of the advantages applicable

More information

نﺎﻤﻟ آ ﻲﻧﺎﭙﻤﻛ يرﺎﺼﺤﻧا هﺪﻨﻳﺎﻤﻧ

نﺎﻤﻟ آ ﻲﻧﺎﭙﻤﻛ يرﺎﺼﺤﻧا هﺪﻨﻳﺎﻤﻧ ا زما صنعت گراد Mahr MARSHAFT I MANUAL SHAFT MEASURING UNITS V02-May 2009 MarShaft MAN Data Sheets 1 MarShaft MAN Shaft Measuring Unit Advantages at first sight A measuring instrument for multiple measuring

More information

50 NEW. Over. items! Valid January 1 st - April 30 th

50 NEW. Over. items! Valid January 1 st - April 30 th Over 50 NEW items! Valid January 1 st - April 30 th Fowler - Trimos V3, V4 & V5 Electronic Height Gages The Fowler-Trimos V3, V4 and V5 vertical measuring instruments have been developed for the most difficult

More information

NEW. Visit our NEW Website Over 100. Items! INDICATORS

NEW. Visit our NEW Website  Over 100. Items! INDICATORS Over 100 NEW Items! INDICATORS Visit our NEW Website www.fowlerprecision.com Tool-A-Thon 15.2 Highlightes Calipers up to 33% off, page 14 Outside Micrometer Sets 20% off, page 6 Fowler-Sylvac Indicators

More information

AUGUST - OCTOBER 2017

AUGUST - OCTOBER 2017 AUGUST - OCTOBER 07 DIGITAL INDICATOR Digital indicator with ABS, Max./Min., TOLERANCE functions and more. With flat back + lug back. Measuring range: 0-,7 mm : Ø diameter: 56 mm Shank Ø: 8 mm 540 0000

More information

Vane wheel probe BFA25 for flow measurement of gases and liquids with integrated, configurable transducer UFA in Ex-d housing

Vane wheel probe BFA25 for flow measurement of gases and liquids with integrated, configurable transducer UFA in Ex-d housing Vane wheel probe BFA25 for flow measurement of gases and liquids with egrated, configurable transducer UFA in Ex-d housing Drawing 5 Vane wheel flow probe BFA25 (Dimensions see Page 3) Measurable variables

More information

DO YOU WANT TO AIM EVEN HIGHER? FOR THIS THERE IS DIGIMAR.

DO YOU WANT TO AIM EVEN HIGHER? FOR THIS THERE IS DIGIMAR. - DO YOU WANT TO AIM EVEN HIGHER? FOR THIS THERE IS DIGIMAR. Mahr offers you the complete product program in order for you to obtain the most reliable solution for all your measuring tasks. Whether it

More information

Bore Gages SERIES 526 for Extra Small Holes

Bore Gages SERIES 526 for Extra Small Holes Bore Gages SERIES 526 for Extra Small Holes These Bore Gages measure diameters of small holes. The radial displacement of split-ball contact is converted to axial displacement of measuring rod, which is

More information

HEIGHT GAGES YES. Frontal Squareness Deviation "/0.005mm "/.008mm "/0.011mm Air Cushion

HEIGHT GAGES YES. Frontal Squareness Deviation /0.005mm /.008mm /0.011mm Air Cushion Over 80 NEW items! HEIGHT GAGES Fowler-Trimos V3, V4 & V5 Electronic Height Gages The Fowler-Trimos V3, V4 and V5 vertical measuring instruments have been developed for the most difficult workshop environments.

More information

Micromar. a new generation with the reference-system

Micromar. a new generation with the reference-system - 2 Micromar. micrometers Micromar. a new generation with the reference-system WATERPROOF MICROMETERS with this new generation of reference micrometers, mahr once again sets a new standard in the micrometer

More information

Electronic Length Measuring Equipment

Electronic Length Measuring Equipment Electronic Length Equipment www.tesatechnology.com O-1 ELECTRONIC LENGTH MEASURING EQUIPMENT TESA INDUCTIVE PROBES AND ELECTRONIC EQUIPMENT TESA probes: At the cutting edge of technology TESA develops,

More information

Digimatic Caliper Gages SERIES 209 Internal Tube Thickness Measurement Type

Digimatic Caliper Gages SERIES 209 Internal Tube Thickness Measurement Type Digimatic Caliper Gages SERIES 209 Internal Tube Thickness Measurement Type Versatile ID measuring gages for hole diameters, groove thickness, tube diameter, and hard-to-reach dimensions. The Digimatic

More information

MarTest. Test Indicators

MarTest. Test Indicators - - Overview Order on our SECURE website: - Versions Measuring Dial style Readings Styli Order no. Order no. range with Kit* Standard S ±." --.". mm 6 S ±." --.". mm 6 SG ±." --.". mm 7 SGI ±." (±. mm)

More information

MarTest. Test Indicators

MarTest. Test Indicators - - Overview - Versions Standard Measuring Dial style Readings Styli Order no. Order no. range with Kit* S ±. mm --. mm. mm SG ±. mm --. mm. mm 7 SA ±. mm --. mm. mm SGA ±. mm --. mm. mm S ±." --.". mm

More information

Metrology CONTENTS BRANDS. Page. Digital Calipers. Depth Gauges Digital depth gauges Micrometers

Metrology CONTENTS BRANDS. Page. Digital Calipers. Depth Gauges Digital depth gauges Micrometers 800 SECTION H Metrology Cutwel s metrology range from Mahr, Insize and JBO provides high quality measuring, from basic hand tools to advanced digital measuring tools. All tools are available with UKAS

More information

Application Series Page. Electronic Indicators 900, 901, 903 E.2 E.3. Dial Indicators 450, 451, 458 E.4 E.5. Transducer Probes 971 E.

Application Series Page. Electronic Indicators 900, 901, 903 E.2 E.3. Dial Indicators 450, 451, 458 E.4 E.5. Transducer Probes 971 E. E Electronic Indicators, Dial Indicators, Digital Probes, Digital Readouts TABLE OF CONTENTS Application Series Page Electronic Indicators 900, 901, 903 E.2 E.3 Dial Indicators 450, 451, 458 E.4 E.5 Transducer

More information

Calipers. B-1

Calipers.  B-1 alipers www.tesatechnology.com -1 alipers THE ESSENTILS alipers are the most popular length measuring instruments used worldwide. Owing to their simple construction, ease of handling and quick operation,

More information

Visit us at Booth No September 10 th - 15 th. Enter For A Chance ToWIN! Register at

Visit us at Booth No September 10 th - 15 th. Enter For A Chance ToWIN! Register at Visit us at Booth No. 135616 September 10 th - 15 th Enter For A Chance ToWIN! Register at www.fowlerprecision.com/win Fowler-Bowers BLUETOOTH XTH3 Holematic Pistol Grip Sets FREE TABLET! with Complete

More information

SPECIAL OFFERS 16,995 METROLOGY DIRECT 4,000. Micro-Vu Vertex 110 Vision Measuring System 2008 AUTUMN / WINTER PROMOTION

SPECIAL OFFERS 16,995 METROLOGY DIRECT 4,000. Micro-Vu Vertex 110 Vision Measuring System 2008 AUTUMN / WINTER PROMOTION Micro-Vu Vertex 110 Vision Measuring System Comprises: Vertex 110 with 200x150x150mm measuring range Dell PC and 17 TFT monitor Windows XP Inspec automated vision software High resolution video system

More information

VECTRA-TOUCH

VECTRA-TOUCH 179 introduction The «Vectra-Touch» height measuring instruments are of universal use in any production field. They are the result of 30 years of experience in development and manufacturing. This experience

More information

Calipers. B-1

Calipers.   B-1 alipers -1 L I P E R S THE ESSENTILS alipers are the most popular length measuring instruments used worldwide. Owing to their simple construction, ease of handling and quick operation, they are a favourite

More information

CALIBRATION. Sylvac Dial Gauge Calibrator

CALIBRATION. Sylvac Dial Gauge Calibrator Sylvac Dial Gauge Calibrator The Sylvac stand is custom designed for calibrating all types of dial gauges, lever indicators and transducers. It utilises a 25mm / 1" travel Sylvac probe linked to a digital

More information

ABS Digimatic Indicator ID-C

ABS Digimatic Indicator ID-C Small Tool Instruments and Data Management Standard Digital Indicator ABS Digimatic Indicator ID-C Bulletin No. 1966 Digital indicators offer dramatically improved readability, usability and functionality

More information

New Products. Small Tool Instruments and Data Management INDEX. Micrometers. Micrometer Heads. Coolant Proof. Micrometer. Digimatic.

New Products. Small Tool Instruments and Data Management INDEX. Micrometers. Micrometer Heads. Coolant Proof. Micrometer. Digimatic. Small Tool Instruments and Data Management Micrometers Micrometer Heads New Products Coolant Proof Micrometer Digimatic Micrometer Ratchet Thimble Micrometer Digimatic Spline Micrometer Fine Pitch Micrometer

More information

Robust Clamps Shock-proof load range

Robust Clamps Shock-proof load range Robust Clamps Shock-proof load range Your application takes centre stage Robust Clamps Stainless steel Features: Extremly strong Vibration proof Impact and shock load... specific demands require specific

More information

Kvalitet skydelære inklusiv DKD certifikat! 700,00 kr

Kvalitet skydelære inklusiv DKD certifikat! 700,00 kr - + M A H R L I G H T S Tilbud gældende indtil 31. december 2009 Kvalitet skydelære inklusiv DKD certifikat! 700,00 kr MarCal 16 EX med rund eller rektangulær dybdemål til vores tilbudspris 565,00 kr,

More information

Digimatic. Height Gages. Linear Height. Depth Gages. SuperCaliper ABSOLUTE. Coolant Proof Caliper. ABSOLUTE Digimatic Caliper ABSOLUTE

Digimatic. Height Gages. Linear Height. Depth Gages. SuperCaliper ABSOLUTE. Coolant Proof Caliper. ABSOLUTE Digimatic Caliper ABSOLUTE D Small Tool Instruments and Data Management Digimatic Caliper Digimatic Height Gages Linear Height Depth Gages SuperCaliper ABSOLUTE Coolant Proof Caliper ABSOLUTE Digimatic Caliper ABSOLUTE Digimatic

More information

Horizon Premium. Length Measuring and Setting Instrument. The new Trimos Horizon Premium

Horizon Premium. Length Measuring and Setting Instrument. The new Trimos Horizon Premium 410 Horizon Premium Length Measuring & Setting Instrument The new Trimos Horizon Premium Length Measuring and Setting Instrument fulfills todays requirements of high accuracy quality control equipment.

More information

U. pr. E Calibration group

U. pr. E Calibration group of measuring and testing equipment easily ordered Primarily according to VDI/VDE/DGQ 2618 For many measuring and test devices a calibration logo with indication of a calibration group is stated. From the

More information

Measuring range X / Y mm 100 / / /170 Z travel mm 200 / 400** Max. table load kg 20

Measuring range X / Y mm 100 / / /170 Z travel mm 200 / 400** Max. table load kg 20 - 10 MarVision. Optical Measuring Instruments Workshop Measuring Microscope MarVision MM 220 Applications For measuring distances (QC 100); bore holes and angles and determination of geometric elements

More information

INTERAPID Depth Feet. Brown & Sharpe CENTER FINDER. Model with a flat measuring face. Model with a prismatic measuring face H-16

INTERAPID Depth Feet. Brown & Sharpe CENTER FINDER. Model with a flat measuring face. Model with a prismatic measuring face H-16 INTERAPID Depth Feet Model with a flat measuring face ø28 ø8 Finish lapped measuring faces. Clamp with lock for mounting a dial gauge or an electronic probe Supplied ø6.5 without indicator 80 Suited carrying

More information

Heavy duty frame Extra large display

Heavy duty frame Extra large display Over 50 NEW items! Bluetooth Ultra-Cal VI Electronic Calipers 54-100-167-0 NOW available with ISO Cert. IP67 rated Available with or without Bluetooth Heavy duty frame Extra large display Order No. Description

More information

V-Anvil Micrometers SERIES 314, Flutes and 5 Flutes

V-Anvil Micrometers SERIES 314, Flutes and 5 Flutes V-Anvil Micrometers SERIES 314, 114 3 Flutes and 5 Flutes Measures the outside diameter of cutting tools (such as taps, reamers, end mills) which have three or five flutes. With Ratchet Stop for constant

More information

ELECTRONIC CALIPER. Range 0-150mm/0-6" 0-200mm/0-8" 0-300mm/0-12" Code

ELECTRONIC CALIPER. Range 0-150mm/0-6 0-200mm/0-8 0-300mm/0-12 Code ELECTRONIC CALIPER Code 1114-150 1114-200 1114-300 Range 0-150mm/0-6" 0-200mm/0-8" 0-300mm/0-12" Zinc alloy case Resolution: 0.01mm/0.0005" Buttons: zero, power on/off, inch/mm Battery SR44, with one spare

More information

TH240g+Ko TH240g+Ko Pneumatic vise grip TH240g+2Ko Pneumatic vise grip TH240g + Ko TH240g + 2Ko Ordering information

TH240g+Ko TH240g+Ko Pneumatic vise grip TH240g+2Ko Pneumatic vise grip TH240g + Ko TH240g + 2Ko Ordering information Pneumatic vise grip Single pneumatic cylinder Sample size: 0 18 mm (depending on jaws) Weight: 1.55 kg each grip (without jaws) TH240g+2Ko Pneumatic vise grip Dual pneumatic cylinder Sample size: 0 18

More information

Noga Head Office. simply sophisticated

Noga Head Office. simply sophisticated Noga Head Office NOGA ENGINEERING & TECHNOLOGY (2008) LTD Noga Engineering and Technology was established in 1980. Over the years the company has grown to become the world leader in the manufacturing of

More information

BEST DEALS. TESA Brown & Sharpe quality measuring instruments at the best prices. HexagonMI.com TESAtechnology.com

BEST DEALS. TESA Brown & Sharpe quality measuring instruments at the best prices. HexagonMI.com TESAtechnology.com BEST DEALS TESA quality measuring instruments at the best prices. Valid until 08.31.2018 s exclude VAT Version B&S - EN - USD HexagonMI.com TESAtechnology.com TESA-HITE 400/700 Robust and reliable. Ideally

More information

Single Leaf Measurement Transducers

Single Leaf Measurement Transducers Single Leaf Measurement Transducers A new range of Flexure Measurement Sensors Sensors to measure hard to reach areas such as bores and gaps Excellent resolution and repeatability Robust designs, good

More information

Inside Micrometers. Bore Gages

Inside Micrometers. Bore Gages Holtest ABSOLUTE Borematic Holtest ABSOLUTE Borematic Inside Micrometers Inside Micrometers Small Tool Instruments Inside Measurement INDEX Holtest Digimatic Holtest -3 Holtest -7 Holtest (Type II) -11

More information

Explanations. 6 Protection (IP-Code) acc. to DIN / IEC etc. Several Icons. Manufacturing process

Explanations. 6  Protection (IP-Code) acc. to DIN / IEC etc. Several Icons. Manufacturing process info@vogel-germany.de - ww.vogel-germany.de Explanations 1 2 8 9 10 In our catalogue you will find several pictograms beside the text description. They should be helpful for a quick and easier explanation

More information

Holtest ABSOLUTE. Borematic. Inside Micrometers. Bore Gages. Digimatic. Holtest. Absolute Borematic. Digimatic Inside Micrometer. Digimatic Bore Gage

Holtest ABSOLUTE. Borematic. Inside Micrometers. Bore Gages. Digimatic. Holtest. Absolute Borematic. Digimatic Inside Micrometer. Digimatic Bore Gage C Small Tool Instruments and Data Management Holtest ABSOLUTE Borematic Inside Micrometers Bore Gages Digimatic Holtest INDEX Holtest Digimatic Holtest C-2, 3 Holtest C-4, 5 Holtest (Type II) C-6, 7 Borematic

More information

ALL-INCLUSIVE, EASY TO USE

ALL-INCLUSIVE, EASY TO USE THE ESSENTIAL METROLOGY CATALOGUE 16/17 Calipers INNOVATIVE NEW PRODUCTS THROUGHOUT THIS ALL-INCLUSIVE, EASY TO USE REFERENCE INTRODUCTION ISO 9001:2015 Quality Guaranteed In 2016 Bowers achieved the latest

More information

HOLTEST / BOREMATIC. Holtest Series micrometers make three-point / two-point bore diameter measurements at top accuracy. Catalog No.

HOLTEST / BOREMATIC. Holtest Series micrometers make three-point / two-point bore diameter measurements at top accuracy. Catalog No. Small Tool Instruments and Data Management HOLTEST / BOREMATIC Catalog No. E12006 Holtest Series micrometers make three-point / two-point bore diameter measurements at top accuracy World Class, High Performance,

More information

7 Micrometers. 47 Calipers. 77 Depth & Height Gauges. 89 Indicator & Dial Gauges. 131 Bore Gauges. 137 Other Gauges. 161 Gauges

7 Micrometers. 47 Calipers. 77 Depth & Height Gauges. 89 Indicator & Dial Gauges. 131 Bore Gauges. 137 Other Gauges. 161 Gauges CATALOG NO. AS7 I N D E X 7 Micrometers 7 Calipers 77 Depth & Height Gauges 89 Indicator & Dial Gauges Bore Gauges 7 Other Gauges Gauges 8 Testers & Optical Instrument A S I M E T O C A T A L O G 7 Precision

More information