Xitanium LED drivers spot- and downlight SELV. Retail via the Philips MultiOne configurator ('TD' drivers) or

Transcription

1 Xitanium LED driver Datasheet Xitanium LED drivers spot- and downlight Enabling future-proof LED technology Our Xitanium prograable window LED drivers ensure OEMs have complete flexibility and control in producing high quality luminaires. Available in application dedicated form factors, our LED point drivers provide further customization via wide operating windows. Additionally, almost all drivers feature the following specifications:, improved ripple current, temperature derating, hot wiring, providing OEMs the tools to produce, and even alter later if necessary, premium downlights and spotlights. enefits Features Application High reliability underpinned by 5 year Operating windows - output current can be adjusted Retail via the Philips MultiOne configurator ('TD' drivers) or Office warranty Future-proof flexibility - with a resistor outside the driver or SimpleSet application-oriented operating Power ratings: 10-75W windows enable LED generation and hoice of housing designs -linear housing for tracks in complexity management ompatibility - can also be used for other manufacturers' modules or OEMs' own P designs '3 in 1' in design, conventional HID housings for down and Spotlighting and WH housing for independent use with strain relief and loop through

2 Electrical input data Nominal input voltage Vac performance range Nominal input frequency Hz Nominal input current 0.26 A Input voltage 230 Vac Nominal input power 60 W Power factor 0.9 Total harmonic distortion full load. See graph. full load Nominal input voltage D Vdc Nominal input current D 0.32 A Input voltage 230 Vdc, full load Input voltage A Vac Operational range Input frequency A Hz Maximum permissible range Input voltage D Vdc Maximum permissible range Isolation Input full full load. See graph. Electrical output data Regulation method onstant urrent Output voltage Vdc Output voltage max. 60 V Peak voltage at open load Output current A Full output current setting Output current tolerance ±5 Output current ripple LF 4 Ripple = peak / average Output power W Full output ontrol method Touch and DALI diing Diing range Default range Electrical data controls input Logistical data Product name Order code Logistic code 12N EAN Pieces per box 20 2/8

3 Wiring & onnections Input wire cross-section WAGO250 (3.5 ), solid / stranded wire AWG WAGO250 (3.5 ), solid / stranded wire Input wire strip length Input wire cross-section WAGO804, solid / stranded wire AWG WAGO804, solid / stranded wire Input wire strip length Output wire cross-section WAGO250 (3.5 ), solid / stranded wire AWG WAGO250 (3.5 ), solid / stranded wire Output wire strip length Maximum cable length 600 Total length of wiring including LED module, one way Insulation Insulation input input output DALI asic 3/8 output DALI asic

4 Dimensions and weight Length (A1) 200 Width (1) 74.2 Height (1) 32 Fixing hole diameter (D1) Fixing hole distance (A2) Weight 215 gram Operational temperatures and humidity Ambient temperature Higher ambient temperature allowed as long as Tcase-max is not Tcase-max 90 Maximum temperature measured at Tcase-point Tcase-life 80 Measured at Tcase-point Maximum housing temperature 110 In case of a failure Relative humidity Non-condensing Ambient temperature Relative humidity exceeded. Storage temperature and humidity 4/8 Non-condensing

5 Lifetime Driver lifetime 50,000 hours Measured temperature at Tcase-point is Tcase-life. Maximum failures = 10 Prograable features Remark Set output current (AO) SimpleSet See Design-in guide. Default output current: 700 ma onstant Lumen Over Lifetime (LO) D emergency diing (DemDIM) orridor mode Energy metering Diagnostics output power to 15 Features Open load protection Remark Automatic recovering Short circuit protection Automatic recovering Over power protection Automatic recovering Hot wiring Suitable for fixtures with protection class I and II per IE60598 ertificates and standards Approval marks E / ENE Ingress Protection classification 20 5/8

6 Inrush current Inrush current Ipeak 24.9 A Input voltage 230V Inrush current Twidth 186 µs Input voltage 230V, measured at 50 Ipeak Drivers / M 16A type 27 pcs M Rating Relative number of LED drivers 10A 63 13A 81 16A 100 (stated in datasheet) 20A A A A A A A 260 Driver touch current Typical touch current 0.7 ma peak Acc. IE LED module contribution not included Mains surge iunity (diff. mode) 1 kv Acc. IE Ohm, 1.2/50us, 8/20us Mains surge iunity (co. mode) 2 kv Acc. IE Ohm, 1.2/50us, 8/20us ontrol surge iunity (diff. mode) 1 kv Acc. IE Ohm, 1.2/50us, 8/20us ontrol surge iunity (co. mode) 2 kv Acc. IE Ohm, 1.2/50us, 8/20us AO 700 ma LO 100 6/8 Surge iunity Additional information

7 Graphs Operating window Power factor versus output power 7/8

8 Efficiency versus output power THD versus output power 2016 Philips Lighting.V. All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Data subject to change. Date of release: June 29,