seal leak & temperature relays
|
|
- Avis Mills
- 6 years ago
- Views:
Transcription
1 seal leak & temperature relays 2014 catalog a of products sales@macromatic.com 1
2 SINGLE & DUAL CHANNEL SFP Series SFP Series Pump Seal Failure Relays are designed to monitor the shaft seals of submersible pumps. A resistive-measuring probe is installed in the pump seal cavity. If the seal starts to leak, contaminating fl uid enters the seal cavity. This lowers the resistance between the internal probe and the common connection. When the resistance drops below the user-adjustable sensitivity set-point of the relay, the output relay energizes and the LED turns Red ON. The relay output can be used to give an alarm indication of a leaking seal. These products will automatically reset when the fault condition clears. seal leak relays plug-in Single Channel Dual Channel Monitors Submersible Pump Seals for Leakage Single or Dual Channel for Monitoring 1 or 2 Pumps Two Adjustable Sensitivity Ranges Probe is Pulsed with a DC Voltage to Prevent Electroplating Low-Profi le Adjustment Knob Uses industry-standard 8 & 11 pin octal sockets with appropriate socket Three output confi gurations are offered: an 8 pin SPDT single channel relay and an 11 pin DPDT single channel relay to monitor a single pump, and an 8 pin dual channel relay (with 2 SPNO contacts) to monitor two pumps. Probes are pulsed with a DC voltage to prevent electroplating issues. INPUT SENSITIVITY PRODUCT WIRING/ CONFIGURATION VOLTAGE RANGE NUMBER SOCKET SINGLE 24V AC 4.7K to 100K SFP024A100 8 Pin Octal CHANNEL 1K to 250K SFP024A D 8 Pin SPDT 120V AC 4.7K to 100K SFP120A100 1K to 250K SFP120A V AC 4.7K to 100K SFP240A100 1K to 250K SFP240A250 DIAGRAM 163 SINGLE 24V AC 4.7K to 100K SFP024B Pin Octal CHANNEL 1K to 250K SFP024B D 11 Pin DPDT 120V AC 4.7K to 100K SFP120B100 1K to 250K SFP120B V AC 4.7K to 100K SFP240B100 1K to 250K SFP240B250 DIAGRAM 162 DUAL 24V AC 4.7K to 100K SFP024C100 8 Pin Octal CHANNEL 1K to 250K SFP024C D 8 Pin (2) SPNO 120V AC 4.7K to 100K SFP120C100 CHANNEL 1K to 250K SFP120C V AC 4.7K to 100K SFP240C100 1K to 250K SFP240C250 DIAGRAM sales@macromatic.com Sockets & Accessories available 2
3 SINGLE & DUAL CHANNEL SFP Series Application Data Voltage Tolerance: AC Operation: +10/-15% of nominal at 50/60 Hz. Load (Burden): 3 VA Probe Voltage: 5V DC Pulsed Response Time: Pick-up: 1 Second Drop-out: 1 Second LED Indicator: Green ON with input voltage applied; Red ON when seal leak detected and relay energized Temperature: Operating: -28 o to 65 o C (-18 o to 149 o F) Storage: -40 o to 85 o C (-40 o to 185 o F) Dimensions Single Channel (8 Pin SPDT Shown) Output Contacts: Single Channel Relays: 8 Pin SPDT: 240V AC / 28V DC, 120V AC (N.O.) 11 Pin DPDT: 240V AC / 28V DC, 120V AC (N.O.) Dual Channel Relays: (2) 240V AC / 28V DC, 120V AC (N.O.) Life: Mechanical: 10,000,000 operations Full Load: 100,000 operations Mounting: Requires Industry-Standard 8 Pin Octal Socket (Macromatic D or equivalent) or 11 Pin Octal Socket (Macromatic D or equivalent) Approvals: File #E Dual Channel with appropriate socket File #E seal leak relays plug-in 2.4 (60) All Dimensions in Inches (Millimeters) 1.7 (43) 2.9 (74) 3.0 (76) sales@macromatic.com 3
4 TEMPERATURE & SEAL LEAKAGE TCP Series seal leak & temperature relays plug-in Monitors Submersible Pumps for Overtemperature & Seal Leakage Two Adjustable Sensitivity Ranges for Seal Leak Seal Leak Probe is Pulsed with a DC Voltage to Prevent Electroplating Low-Profi le Adjustment Knob Full status indication on top of unit for easy troubleshooting Uses industry-standard 11 pin octal sockets with appropriate socket The TCP Series protects submersible pump motors against damage from both seal leakage and over temperature. Two wires are connected to a resistive-sensing probe and common in the seal cavity to monitor for seal leakage. Two additional wires are connected to a N.C. thermal switch in the windings of the pump motor to monitor for over-heating. The product has isolated output contact relays, one for seal leak and one for over temperature. The over temperature set-point isfi xed at 5K ohms. Two adjustable seal leak sensitivity ranges are available: 4.7K-100K ohms and 1K-250K ohms. Operation: With input voltage applied, normal temperature condition (thermal switch closed) and no seal leak, the over temperature relay is energized and the seal leak relay is de-energized. Both LEDs are Green. When the motor temperature rises and the N.C. thermal switch opens, the over temperature relay is de-energized, opening a contact that had been closed and turning off the pump contactor. The TEMP LED turns Red. If the seal starts to leak, contaminating fluid enters the seal cavity. This lowers the resistance between the internal probe and the common connection. When the resistance drops below the user-adjustable sensitivity set-point of the relay, the output relay energizes and closes a contact, which can be used to give an alarm indication of a leaking seal. The LEAK LED turns Red. These products will automatically reset when the fault condition clears. INPUT SENSITIVITY CATALOG WIRING/ VOLTAGE RANGE NUMBER SOCKET 24V AC 4.7K to 100K TCP8G Pin Octal 1K to 250K TCP8G D 120V AC 4.7K to 100K TCP2G100 1K to 250K TCP2G V AC 4.7K to 100K TCP1G100 1K to 250K TCP1G250 Seal-Leak is adustable - over temperature is fi xed at 5K. Sockets & Accessories available DIAGRAM sales@macromatic.com 4
5 TEMPERATURE & SEAL LEAKAGE TCP Series Application Data Voltage Tolerance: AC Operation: +10/-15% of nominal at 50/60 Hz. Load (Burden): 3 VA Probe Voltage: 5V DC Pulsed Resistance Sensitivity Range (Seal Leak): 4.7K - 100K or 1K - 250K Resistance Setting (Over Temperature): 5K Response Time: Pick-up: 1 Second Drop-out: 1 Second Temperature: Operating: -28 o to 65 o C (-18 o to 149 o F) Storage: -40 o to 85 o C (-40 o to 185 o F) Dimensions Output Contacts: 240V AC / 28V DC, 120V AC (N.O.) Life: Mechanical: 10,000,000 operations Full Load: 100,000 operations LED Indicator: Seal Leak: Green ON with input voltage applied and no seal leak; Red ON when seal leak detected and relay energized Over Temp: Green ON with input voltage applied, normal temperature condition and relay energized; Red ON when over temperature detected and relay de-energized Mounting: Requires Industry-Standard 11 Pin Octal Socket (Macromatic D or equivalent) Approvals: File #E with appropriate socket File #E seal leak & temperature relays plug-in All Dimensions in Inches (Millimeters) sales@macromatic.com 6
6 SOCKETS & ACCESSORIES 8 Pin Octal Socket Surface or DIN Rail-Mounted 600V 1 or 2 #12-22 AWG Wire Recommended Tightening Torque of 7 in-lbs. (12 in-lbs maximum) Pressure Wire Clamp Terminations Catalog Number: D File #E File #LR sockets & accessories 11 Pin Octal Socket Surface or DIN Rail-Mounted 600V 1 or 2 #12-22 AWG Wire Recommended Tightening Torque of 7 in-lbs. (12 in-lbs maximum) Pressure Wire Clamp Terminations File #E File #LR Catalog Number: D Hold Down Spring Can be used for: Panel-Mounted Sockets Sockets Mounted to 35mm DIN Rail* * Requires two machine screws with washers & nuts-contact Macromatic or for more information. Catalog Number: sales@macromatic.com
7 MACROMATIC INDUSTRIAL CONTROLS Macromatic Industrial Controls is a highly-responsive, independently owned manufacturer of industrial control and monitoring products. Located in America s Heartland, Macromatic s highly trained team uses state-of-the-art equipment and proven quality control methods to produce products with superior performance. Macromatic s extensive offering of relays include: Three-Phase Monitor Alternating Time Delay Seal Leak & Temperature Liquid Level Control Voltage Monitor Current Sensing Intrinsically Safe Custom Macromatic s customer-focus and quality is unparalleled in the industry. With almost 40 years of experience, Macromatic makes it simple and cost-effective to find a solution for any application. macromatic industrial controls sales@macromatic.com
8 MACROMATIC INDUSTRIAL CONTROLS FAMILY OF PRODUCTS macromatic industrial controls Specifications subject to change without notice Macromatic is a registered tradename of Macromatic Industrial Controls, Inc.
current sensing relays
2014 catalog a of products current sensing relays 800.238.7474 www.macromatic.com sales@macromatic.com 1 AC OVERCURRENT & UNDERCURRENT CAH, COH & CUH Series current sensing relays encapsulated Monitors
More informationvoltage monitor relays
voltage monitor relays catalog of products PRODUCT SUMMARY voltage monitor relays Voltage Monitor Relays monitor either AC single phase (50-60Hz) or DC voltages to protect equipment against voltage fault
More informationNON-PROGRAMMABLE ON DELAY, INTERVAL, TRUE OFF DELAY & FLASHER
time delay relays plug-in NON-PROGRAMMABLE ON DELAY, INTERVAL, TRUE OFF DELAY & FLASHER Onboard & remote adjustable or fi xed time delays from 0.05 seconds to 2 hours Uses industry-standard 8 pin octal
More informationNON-PROGRAMMABLE OFF DELAY, SINGLE SHOT
time delay relays plug-in NON-PROGRAMMABLE OFF DELAY, SINGLE SHOT & WATCHDOG 8 Pin SPDT Versions TR-5 Series These are 8 pin 10A SPDT versions of our standard 11 pin DPDT products Onboard & remote adjustable
More informationPROGRAMMABLE MULTI-FUNCTION
PROGRAMMABLE MULTI-FUNCTION DIP-Switch Digital-Set TD-8 Series time delay relays plug-in Sixteen user-selectable modes in one unit DIP-Switches for accurate digital set of time delay & selection of function
More informationPROGRAMMABLE MULTI-RANGE REPEAT CYCLE & DELAYED INTERVAL
PROGRAMMABLE MULTI-RANGE REPEAT CYCLE & DELAYED INTERVAL TR-6 Series Time Ranger tm INPUT VOLTAGE PRODUCT WIRING/ FUNCTION 50/60Hz. NUMBER SOCKET time delay relays plug-in Each unit has 16 timing ranges
More informationTIME DELAY RELAYS Product Summary
Product Summary Macromatic offers a wide variety of time delay relays and accessories. Each one has different features and operating characteristics, allowing you to choose the exact product to meet your
More informationPROGRAMMABLE MULTI-RANGE REPEAT CYCLE & DELAYED INTERVAL
PROGRAMMABLE MULTI-RANGE REPEAT CYCLE & DELAYED INTERVAL TR-6 Series Time Ranger tm The TR-6 Series offers the fl exible programmability of a multi-range time delay relay together with a universal input
More informationPROGRAMMABLE MULTI-RANGE ON DELAY, INTERVAL ON & FLASHER
PROGRAMMABLE MULTI-RANGE ON DELAY, INTERVAL ON & TR-6 Series Time Ranger tm The TR-6 Series offers the fl exible programmability of a multi-range time delay relay together with a universal input voltage.
More informationPROGRAMMABLE MULTI-RANGE OFF DELAY, SINGLE SHOT & WATCHDOG
PROGRAMMABLE MULTI-RANGE OFF DELAY, & TR-6 Series Time Ranger tm The TR-6 Series offers the fl exible programmability of a multi-range time delay relay together with a universal input voltage. These products
More informationTIME DELAY RELAYS TR-6 SERIES Time Ranger TM Programmable Multi-Range Plug-in Off Delay, Single Shot & Watchdog
TR-6 SERIES Time Ranger TM Programmable Multi-Range Plug-in Off Delay, Single Shot & Watchdog INPUT VOLTAGE PRODUCT WIRING/ FUNCTION 50/60Hz. NUMBER SOCKETS OFF 120V AC/DC TR-61622 11 PIN OCTAL Control
More informationPHASE MONITOR RELAYS Product Summary
Product Summary Phase Monitor Relays provide protection against premature equipment failure caused by voltage faults on 3 Phase systems. All Macromatic Phase Monitor Relays are designed to be compatible
More informationTIME DELAY RELAYS TD-7 Series Time Ranger TM Digital-Set Programmable Multi-Range Plug-in
TD-7 Series Time Ranger TM Digital-Set Programmable Multi-Range Plug-in The TD-781 Series offers an easy and accurate way to select a function & any time delay between 50ms & 999 hours. Programming is
More informationTIME DELAY RELAYS Product Summary
Product Summary Macromatic offers a wide variety of time delay relays and accessories. Each one has different features and operating characteristics, allowing you to choose the exact product to meet your
More informationVOLTAGE MONITOR RELAYS Product Summary
Product Summary Monitor Relays monitor either AC single phase (50-60Hz) or DC voltages to protect equipment against voltage fault conditions. No separate supply (input) voltage is required on any Macromatic
More informationVOLTAGE MONITOR RELAYS Product Summary
Product Summary Monitor Relays monitor either AC single phase (50-60Hz) or DC voltages to protect equipment against voltage fault conditions. No separate supply (input) voltage is required on any Macromatic
More informationPC-200-LLC-GM INSTALLATION INSTRUCTIONS. Revision A1 Rapid City, SD, USA, 10/2009 II_PC-XXX-LLC-GM_A1
INSTALLATION INSTRUCTIONS Revision A1 Rapid City, SD, USA, 10/2009 MODELS PC-100-LLC-GM PC-200-LLC-GM II_PC-XXX-LLC-GM_A1 2880 North Plaza Drive, Rapid City, South Dakota 57702 (800) 843-8848 (605) 348-5580
More informationCurrentWatch Current Sensors. EGF Series Ground Fault Sensors. Ground Fault Sensors with Solid-State or Mechanical Relay Outputs.
CurrentWatch Current Sensors Ground Fault Sensors with Solid-State or Mechanical Relay s 1 Contents Overview.................... 1 Model Selection, Switches...... 2 Model Selection, Accessories... 3 Wiring
More informationTime Counters mini "h", DC Version
Type 633-DC Time Counters mini "h", DC Version Type 633.0 Type 633.7 Type 633.8 High shock resistance Miniature dimensions Electrical connections in standard grid Suitable for PCB mounting Machine-solderable
More informationProduct Selection Guide
Product Selection Guide Automatic Timing and Controls Diversified Electronics TIMERS COUNTERS MOTOR PROTECTION POWER ALERTS NEW PRODUCT ADDITIONS FROM ATC & DIVERSIFIED ELECTRONICS SLU- 0201 Universal
More informationALLEN BRADLEY RELAY Bulletin 700-HF
ALLEN BRADLEY RELAY Bulletin 700-HF Contact Rating DPDT, 3PDT, 4PDT Plug-in Quick Connect Solder Terminals Options: LED, Push-to-Test Operator DEMENSIONS: Bulletin 700-HF Relay (DPDT) Bulletin 700-HF (3PDT)
More informationLatching, Sequence and Impulse Relays Application Data
Latching, Sequence and Impulse Relays Application Data Energy Conservation Relays In many applications it is important for the customer to conserve electrical energy. One approach to energy conservation
More informationTABLE OF CONTENTS Bulletin 700-HA General Purpose Relays and Timing Relays. Description Page Description Page. Description
9 Bulletin 700-HA Bulletin 700-HA 10 A Rating DPDT 3PDT Pin Style Terminals Standard ON/OFF Flag Indicator Finger Grips for Easy Installation and Removal Optional Manual Operator Optional Pilot Light Optional
More informationTransistor drive 2c/4c 5A slim power relays
Transistor drive c/c 5A slim power relays NC RELAYS NC Flat type () NC (Plug-in type) RoHS compliant NC Flat type () NC () FEATURES 1. Compact, slim design Use of high-performance flat electromagnetic
More informationTeSys IEC Contactors and Overload Relays
TeSys IEC Contactors and Overload Relays Making High-Fault Short-Circuit Current Ratings Simple Schneider Electric is an industry leader in IEC contactors and overload relays, and is recognized as the
More informationBulletin 700-HL 2-Pole Terminal Block Relay
Bulletin 700-HL 2-Pole Terminal Block Relay Bulletin 700-HL 2-Pole "Terminal Block Relay" Relay and socket assembled interface modules for high density interposing or isolation applications Screw terminal
More information78 Series Electromechanical Relay Selection Guide
78 Series Electromechanical Relay Selection Guide Specification 781 Series 782 Series 783 Series 784 Series Coil Voltages Configuration SPDT DPDT 3PDT 4PDT Contact Rating 15A 15A 15A 15A Base Socket 5
More informationMSR Level Control Relay Module Operating Instructions for Level Control Relay Module Model: MSR
Operating Instructions for Level Control Relay Module Model: MSR MSR Operation Instructions Rev. Apr 07 Page 1/8 1. Note Please read and take note of these operating instructions before unpacking and commissioning.
More informationBulletin 817 Thermistor Protection Relay
6 Bulletin 817 Accurate Temperature Monitoring for Critical Applications Automatic, Manual and Remote Reset Status Indicating LEDs DIN Rail or Panel Mounting Guarded Terminals IP20 1 N.O. and 1 N.C. Output
More informationQuantum III. Compact DC Drive Package. Slitter DC Drive Package. Quantum III
Compact DC Drive Package The delivers a DC drive package that integrates the intelligence of the Mentor II with a space saving design that incorporates many accessories typically required in the North
More informationMODELS DPDT DPDT DPDT-60MS DPDT-60MS
INSTALLATION INSTRUCTIONS Revision B1 Rapid City, SD, USA, 03/2010 MODELS 201-100-DPDT 201-200-DPDT 201-100-DPDT-60MS 201-200-DPDT-60MS II_201-XXX-DPDT_B1 II-201-DPDT-B BE SURE POWER IS DISCONNECTED PRIOR
More informationPGR-3200 MANUAL INSULATION MONITOR
Tel: +1-800-832-3873 E-mail: techline@littelfuse.com www.littelfuse.com PGR-3200 MANUAL INSULATION MONITOR REVISION 3-E-040918 Copyright 2018 by Littelfuse, Inc. All rights reserved. Document Number: PM-1025-EN
More informationPGR-2601 MANUAL DC GROUND-FAULT RELAY
POWR-GARD Ungrounded DC System PGR-2601 SERIES DC Ground-Fault Relay PGR-2601 MANUAL DC GROUND-FAULT RELAY AUGUST 31, 2009 REVISION 1 POWR-GARD DC GROUND-FAULT RELAY PWR TRIP 5 4 3 2 6 - BUS 8 10 15 20
More informationSwitching and controlling in the switch cabinet
Switching and controlling in the switch cabinet Relays Opto-coupler Solid state relays Intelligent interface technology 02 03 MIRO INTERFACE TECHNOLOGY MINIMUM SPACE MAXIMUM FUNCTIONALITY Application areas
More informationRelays & Sockets RR Series Power Relays. Part Number Selection
RR Series Power Relays Key features: SPDT through PDT, A contacts Midget power type relays Available in pin and blade terminal styles. Options include an indicator, check button for test operations and
More information29 $ Manual Motor Starters FREESHIPPING. MOTOR CONTROLS 25. Features: MMS-32H Frame. MMS-63H Frame.
www.factorymation.com/motorcontrols MOTOR CONTROLS 25 Manual Motor Starters High interrupt capacity Din rail and surface mounting Lockable handle (OFF position) IP20 finger safe terminals Class 10 thermal
More informationCat. No. (Spring Clamp. Input Voltage
Bulletin -HL Product Overview/Product Selection Product Selection Bulletin -HL "Terminal Block Relay" Relay and socket assembled interface modules for high density interposing or isolation applications
More informationThermistor motor protection relays CM-MSS.22 and CM-MSS.23
Data sheet Thermistor motor protection relays CM-MSS.22 and CM-MSS.23 The thermistor motor protection relays CM-MSS.22 and CM-MSS.23 monitor the winding temperature of motors and protect them from overheating,
More informationThermistor motor protection relays CM-MSS.12 and CM-MSS.13
Data sheet Thermistor motor protection relays CM-MSS.12 and CM-MSS.13 The thermistor motor protection relays CM-MSS.12 and CM-MSS.13 monitor the winding temperature of motors and protect them from overheating,
More informationOperating Instructions. For. Level Control Module. Model SSR 1000
Operating Instructions For Level Control Module Model SSR 1000 SSR Operation Instructions Rev. 1 Jan 01 Page 1/7 1. Note Please read and take note of these operating instructions before unpacking and commissioning.
More informationE-STOP relays, safety gate monitors
Safety relay for monitoring E-STOP pushbuttons and safety gates. Approvals Unit features Positive-guided relay outputs: 2 safety contacts (N/O), instantaneous 2 safety contacts (N/O), delay-on de-energisation
More informationTemperature Switches
ETS 00 Series Temperature Switch for Inline and Tank Mounting Applications Description The ETS 00 is a compact electronic temperature switch with 4-digit digital display. Pressure resistant to 8700 psi,
More informationBasic Switch. Pin plunger Short hinge Hinge lever Long hinge lever Simulated hinge Short hinge Hinge roller lever lever roller lever lever
Basic Switch MINIATURE Watertight Miniature Basic Switch High-quality watertight, high-precision miniature basic switch meets IP67 requirements IEC 529 (lead wire type) Monoblock construction assures high
More informationMSR178DP. Description. Features. Specifications
MSR178DP Description The MSR178DP is a multi-function time-delay relay for use in safety circuits. It can be configured by the user to perform on-delay, offdelay or single-pulse modes. It is used for applications
More informationTimers. GT3W Series Dual Time Range Timers. 250V AC/150V DC Time Range. 1: 0.1sec to 6 hours, 3: 0.1sec to 300 hours
GT3W Key features: Sequential start, sequential interval, on-delay, recycler, and interval ON timing functions 2 time settings in one timer 8 selectable operation modes on each model Mountable in sockets
More informationThermistor motor protection relays CM-MSS.32 and CM-MSS.33
Data sheet Thermistor motor protection relays CM-MSS.32 and CM-MSS.33 The thermistor motor protection relays CM-MSS.32 and CM-MSS.33 monitor the winding temperature of motors and protect them from overheating,
More informationALTERNATING RELAYS & CONTROLLERS ARM Series
ALTERNATING RELAYS & CONTROLLERS ARM Series Process Control Equipment for Hazardous Locations 7M26 UL913 INCLUDES INTRINSICALLY SAFE INPUTS Integrated Duplex Controller SOSO Operation (Sequence-on, Simultaneous-off)
More informationDeltaV Bulk Power Supplies
DeltaV Distributed Control System Product Data Sheet DeltaV Bulk Power Supplies DeltaV 5 A, 10A, 20 A, 40 A Bulk Power Supplies. DeltaV 20 A, 40 A and 80 A Bulk Power Supply Redundancy Modules. Easy to
More informationC-Series C142 Machine Controller Eurocard DIN Packaged Systems
C-Series C142 Machine Controller Eurocard DIN Packaged Systems FEATURES: Available as 2- or 3-axes CNC Controller Remote START/STOP/RESET Bidirectional serial communication at up to 192 baud 32K of on-board
More information02/11/2015
DIN Rail Mount 22.5 mm ETM2 Part number 84874023 Version ETM : Controls temperature of machines using built-in PTC probes Line break or probe short-circuit detection Version ETM2 / ETM22 : Fault latching
More informationLC-1 Level Controller & Flow Monitor
The Level Controller and Flow Monitor provides a fully integrated Duplex Controller. The unit allows collecting 'rate of flow' information and the verification of the run time characteristics of the external
More informationElectronic timer CT-ERS.21
2CDC 251 057 F0t07 Features Rated control supply voltage 24 240 V AC/DC Single function ON delay timer One device includes 10 time ranges (0.05 s 300 h) 2 c/o contacts 2 LEDs for status indication Width
More informationSection 5 Dedicated Timers
Section 5 Timers Note: DIN Rail Mounting Product pages are not included in this catalog. Go to: www.ssac.com/sg5.pdf Click on the Product Name (ie: CT-SDS) to open the catalog page. [dobe crobat Reader
More informationElectronic timer CT-AHD.22
2CDC 251 093 F0t06 a Rotary switch for the preselection of the time range b Potentiometer with direct reading scale for the fine adjustment of the time delay c U: green LED V control supply voltage applied
More informationPHOENIX CONTACT Features
Electronic monitoring relay for temperature monitoring Data sheet 107385_en_00 1 Description PHOENIX CONTACT - 2016-05-10 Features Safety and system availability requirements are constantly on the increase
More informationPGR-6101 MANUAL GROUND-FAULT & INSULATION MONITOR
Tel: +1-800-832-3873 E-mail: techline@littelfuse.com www.littelfuse.com PGR-6101 MANUAL GROUND-FAULT & INSULATION MONITOR Revision 0-C-041918 Copyright 2018 by Littelfuse, Inc. All rights reserved. Document
More informationMicro Contactor MA Series
Relay-sized contactor, making it the world s smallest >3mm contact clearance acc. to IEC 60335-1 for Safety Applications Reversing contactor with mechanical interlock 3 Pole and 1 Aux. Contact NO or NC
More informationBulletin 700-HA Tube Base Relay
Bulletin 700-HA Tube Base Relay Bulletin 700 HA Tube Base Relay 10 A contact rating DPDT, 3PDT Pin-style terminals Standard ON/OFF flag indicator Options: LED, push-to-test and manual override, socket-mounted
More informationE-STOP relay, safety gate monitor
Safety relay for monitoring E-STOP pushbuttons, safety gates and light barriers. Approvals Unit features Positive-guided relay outputs: 2 safety contacts (N/O), instantaneous 1 semiconductor output Connection
More information31.1. Motor Protection and Monitoring. For Immediate Delivery or Tech Support call KMParts.com at (866) Contents
.1 Motor Protection and Monitoring Product Overview Current Eaton offers two different series of current monitoring relays: CurrentWatch Series The CurrentWatch ECS and ECSJ Series from Eaton s electrical
More informationI/O Expansion Module Installation & Reference
Overview The In-Sight vision sensor supports up to ten discrete inputs and ten discrete outputs. Two inputs and two outputs are built-in to the In-Sight processor. The remaining eight inputs and outputs
More informationmxcontrol Multifunction Controller
mxcontrol Multifunction Controller Data and event logging One controller hardware with dozens of configuration possibilities quickly downloaded via SD card (supplied) or via USB interface Type 8620 can
More informationV-3000 Series Miniature Basic Switches
6 V-3000 Series Miniature Basic Switches Specifications FEATURES V-type Microswitches (JIS C 4505) That Feature Excellent Tracking and That Use Special Thermosetting Resin Used in Switch Cases and Covers.
More informationOVERLOAD RELAYS POWER & ACTUATION PROVEN. series
POWER & ACTUATION OVERLOAD RELAYS series Need reliable, accurate overload and phase-loss protection for your motors? c3controls Series Bimetallic Overload Relays provide unmatched protection and can be
More informationContinuous level measurement Ultrasonic controllers
Siemens AG 0 Overview is a complete ultrasonic level controller for monitoring and control of water distribution and wastewater collection systems, with energy-saving algorithms. Benefits Monitoring and
More informationThermistor motor protection relays CM-MSS.22 and CM-MSS.23
Data sheet Thermistor motor protection relays CM-MSS.22 and CM-MSS.23 The thermistor motor protection relays CM-MSS.22 and CM-MSS.23 monitor the winding temperature of motors and protect them from overheating,
More informationmasterelectronics.com onlinecomponents.com
Basic Switch MINIATURE Watertight Miniature Basic Switch High-quality watertight, high-precision miniature basic switch meets IP67 requirements (IEC 529) Monoblock construction assures high sealing capability
More informationSquare D General Purpose Relays
Square D General Purpose Relays Class 850R miniature control relays 850RS4 standard 850RS24 low level 850RS34 hermetically sealed Catalog 204 Contents Class 850R miniature control relays bbspecifications....................................................
More informationLC-5 Level Controller & Flow Monitor
The Level Controller and Flow Monitor provides a fully integrated Duplex Controller supporting both analog and discrete (float switch) level detection. The unit allows collecting 'rate of flow' information
More informationE-STOP relays, safety gate monitors
Safety relay for monitoring E-STOP pushbuttons, safety gates and light barriers. Approvals Block diagram Unit features Positive-guided relay outputs: 6 safety contacts (N/O), instantaneous 4 auxiliary
More informationThermistor motor protection relays CM-MSS.12 and CM-MSS.13
Data sheet Thermistor motor protection relays CM-MSS.12 and CM-MSS.13 The thermistor motor protection relays CM-MSS.12 and CM-MSS.13 monitor the winding temperature of motors and protect them from overheating,
More informationVoltage monitoring relays CM-ESS.1 For single-phase AC/DC voltages
Data sheet Voltage monitoring relays CM-ESS.1 For single-phase AC/DC voltages The CM-ESS.1 is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of
More informationAS-i Safety Relay Output Module with Diagnostic Slave and 1 EDM Input
Safety + standard I/O in one module Safety relay output with galvanically isolated contact sets, approved up to 230 V IEC 61508 SIL 3, EN ISO 13849-1/PLe Kat 4, EN 62061 SIL 3 Protection category IP20
More informationThermistor motor protection relay CM-MSS.11
Data sheet Thermistor motor protection relay CM-MSS.11 The thermistor motor protection relay CM-MSS.11 monitors the winding temperature of motors and protects them from overheating, overload and insufficient
More informationSP SP-T-9
INSTALLATION INSTRUCTIONS Revision B1 Rapid City, SD, USA, 04/2010 MODELS 201-100-SP 201-200-SP 201-200-SP-T-9 II_201-SP_B1 2880 North Plaza Drive, Rapid City, South Dakota 57702 (800) 843-8848 (605) 348-5580
More informationContacts Contact Arrangement. 8-Pole Relay. 12-Pole Relay
Bulletin -P Heavy-Duty Industrial s Product Selection DC-Operated s Rail Mount DIN Rail Mount Cat. No. Cat. No. -Pole DC-P DC-PD DC-P DC-PD -Pole DC-P DC-PD DC-P DC-PD -Pole DC-P DC-PD DC-P DC-PD DC Coil
More informationSpecial-purpose Basic Switch
Special-purpose Basic Switch DPDT Basic Switch for Two Independent Circuit Control Incorporates two completely independent built-in switches. Ideal for switching the circuits operating on two different
More informationSingle-phase ( V) voltage monitoring: Undervoltage Overvoltage Window mode (overvoltage + undervoltage) Voltage fault memory selectable
70 Series - Line monitoring relay 70 Features 70.11 70.31 70.41 Electronic voltage monitoring relays for single and three-phase applications Multifunctional types, providing the flexibility of monitoring
More informationUSB-PDISO8 Specifications
USB-PDISO8 Specifications Document Revision 1.2, February, 2010 Copyright 2010, Measurement Computing Corporation Typical for 25 C unless otherwise specified. Specifications in italic text are guaranteed
More informationCatalog Index Page Description C A Briggs Company -
1 Catalog Index Page Description 1 Catalog Index, page 1 2 Catalog Index, page 2 3 Catalog Index, page 3 4 Catalog Index, page 4 5 Phase Monitor Ordering Information Sheet 6 Phase Monitors, 8 Pin, Plug-In
More information24 V DC typ. 0,65 W. Liquid level with conductive probes (type SK1, SK5) Resistance measurement E1-E0, E2-E0, E3-E0, E4-E0
monitoring in conductive liquids 4 probe inputs for level monitoring Multifunction Adjustable sensor voltage Supply voltage 24-240V AC/DC Protective separation of measuring circuit 3 normally open contacts
More informationAdvantages of the 820 Series Time Delay Relays
Advantages of the 820 Series Time Delay Relays Time Setting Select Between 10 Different Time Scales. Fine Time Setting Ultimate Control in Accuracy. The new 820 Series Time Delay Relays are DIN rail mountable
More informationVEO. V2PF480Y/277VSY01 Art.Nr.: V2PF480Y/277VSY01P Art.Nr.: TECHNICAL DATA
Monitoring of phase sequence and phase loss Monitoring of asymmetry Supply voltage 208-480 V AC Supply circuit = measuring circuit 1 change-over contact Width 22,5 mm Control elements Asymmetry Status
More informationVEO. V2UF230V10 Art.Nr.: TECHNICAL DATA
Continous voltage monitoring Mains fluctuation detection Detects voltage drop / short interruptions of at least 10ms Prevents undefined states in switching and control systems Generates reset pulse after
More information407B 1/16 DIN Multi-Mode Timer
< Marsh Bellofram Group of Companies < Automatic Timing & Controls < Timer < 407B Series Downloadable Files: 407B Series 407B 1/16 DIN Multi-Mode Timer Selectable On-Delay/Off-Delay/Interval Timing Modes
More informationKILOVAC WD Series, DIN Rail or Screw Mounted Protective Relays
KILOVAC WD Series, DIN Rail or Screw Mounted Protective Relays n WD25 Paralleling (Synch Check) Relays n WD2759 Over/undervoltage Relays n WD32 Reverse Power Relays n WD47 Phase Sequence Relays n WD5051
More informationMotor Protection and Monitoring
Motor Protection and Monitoring Motor Protection Circuit Breaker Manual Motor Protector Overload Relay C440 C441, Motor Insight.1 Monitoring Relays Product Overview Monitoring Relays..............................
More informationIEC Type Industrial Control Relays; TeSys D-Line, K-Line, and SK-Line K-Line Ordering Informaiton
K-Line Ordering Informaiton K-Line Ordering Information Control Relays - Mounting on 35 mm DIN3 track or 4 screw direct mounting. - Screws in open ready-to-tighten position. Control Circuit Contact Configuration
More informationMotor Protection and Monitoring
Motor Protection and Monitoring Motor Protection Circuit Breaker.1 Monitoring Relays Product Overview Monitoring Relays........................ Current Monitoring Relays..................................
More informationMotor Protection and Monitoring
Motor Protection and Monitoring Motor Protection Circuit Breaker.1 Monitoring Relays Product Overview Monitoring Relays........................ Current Monitoring Relays..................................
More informationElectronic timer CT-APS.21 OFF-delayed with 2 c/o (SPDT) contacts
Data sheet Electronic timer CT-APS.21 OFF-delayed with 2 c/o (SPDT) contacts The CT-APS.21 is an electronic timer from the CT-S range with OFF-delay. It provides 10 time ranges and a continuous rated control
More informationPositive-guided relay outputs: 3 safety contacts (N/O), instantaneous. 1 auxiliary contact (N/C), instantaneous
Safety relay for monitoring E-STOP pushbuttons. Approvals Unit features Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous 1 auxiliary contact (N/C), instantaneous Safe separation of
More information70 SERIES. Line monitoring relay
70 SRIS 70 SRIS lectronic voltage monitoring relays for single and three-phase applications Multifunctional types, providing the flexibility of monitoring Undervoltage, Overvoltage, Window Mode, Phase
More informationThree-phase monitoring relay
2CDC 251 044 F0t08 Features Monitoring of three-phase mains for phase sequence and failure Powered by the measuring circuit 2 c/o (SPDT) contacts 1 LED for status indication Approvals R: yellow LED - relay
More informationDescription Basic devices with positive operation contacts. Standards IEC/EN 60947, EN , VDE 0660, UL, CSA
Delivery program Contactor relay, 3N/O+1N/C, DC current Part no. DILA-31(24VDC) Catalog No. 276379 Eaton Catalog No. XTRE10B31TD EL-Nummer 4130206 (Norway) Product range DILA relays Application Contactor
More informationElectronic timer CT-SDS.23 Star-delta change-over with 2 n/o contacts
Data sheet Electronic timer CT-SDS. Star-delta change-over with n/o contacts The CT-SDS. is an electronic timer from the CT-S range with Star-delta change-over and 7 time ranges. All electronic timers
More informationRELAYS MAGNECRAFT. Energy Conserving. Time Delay. Sockets. Relays. Relays. Power Relays. Solid State. Plug-In Relays PCB.
MAGNECRAFT RELAYS Sockets Time Delay Relays Energy Conserving Relays Plug-In Relays Power Relays Solid State Relays PCB Relays www.magnecraft.com Commitment to Continuous INNOVATION Why Magnecraft? Over
More informationElectronic timer CT-ERD.12
2CDC 251 092 F0t06 a Rotary switch for the preselection of the time range b Potentiometer with direct reading scale for the fine adjustment of the time delay c U: green LED V control supply voltage applied
More informationElectronic timer CT-ERS.12 ON-delayed with 1 c/o contact Data sheet
2CDC 251 056 F0t07 Features Rated control supply voltage 24-48 V DC, 24-240 V AC Single-function ON-delay timer One device includes 10 time ranges (0.05 s - 300 h) 1 c/o contact 2 LEDs for status indication
More informationTimers. RTE Series. RTE Series Analog Timers. Specifications. G-8 USA: (800) 262-IDEC or (408) , Canada (888) 317-IDEC
Analog Timers Key features of the RTE series include: time ranges and timing functions ON-delay, interval, OFF-delay, one-shot Time delays up to 0 hours Space-saving package (." x." x.0") High repeat accuracy
More information