ECP-PTU Series. ECP-PTU Series. 14-Point High-Voltage Programmable Power Terminal Unit Controller. Applications. Features

Size: px
Start display at page:

Download "ECP-PTU Series. ECP-PTU Series. 14-Point High-Voltage Programmable Power Terminal Unit Controller. Applications. Features"

Transcription

1 ECP-PTU Series 14-Point High-Voltage Programmable Power Terminal Unit Controller Applications Control of equipment such as: roof top units, fan coils, heat pumps, ventilator units, terminal units, lighting systems, refrigeration systems, etc. Control of many other types of HVAC and lighting equipment, as well as power measurement applications Features Supported Platforms LNS Niagara AX Framework Interoperability Based on LONWORKS technology for peer-to-peer communication between controllers LONMARK certified according to the Interoperability Guidelines Version 3.4 Hardware Controller power voltage ranging from 85 to 265VAC 6 universal inputs (jumper-less selection). Input types include: Resistance, 0-10VDC, 4-20mA, Digital and Pulse 4 digital relay (on/off) outputs (up to 277VAC) 4 digital (triac) outputs (up to 265VAC). Output types include: Digital, PWM or floating 1 1 Smart-Sensor supported 1 Integrated EnOcean 868.3MHz wireless receiver (ECP-PTU-W model) 1 Separable base plate allows base with connectors to be shipped to site for installation while engineering is done at the office Din-rail mounting integrated into the fire retardant plastic enclosure Transmit, receive and power LED indicators Status indicator on each output Software Can be programmed by EC-Program or ECgfxProgram More than 60 network variables NVIs & NVOs of changeable type and length Support of fan-in binding for zoning applications Programmable Object Configuration, code and label stored in the controller itself for advanced backup purposes Many programming features available such as PID loops, timers, optimum start, etc. View all internal points (e.g. constants, variables, ) Scheduler Objects All schedules are stored in Flash memory Schedule network variables are of changeable type and length Seven weekday templates per scheduler Four holiday templates per scheduler The are microprocessor-based programmable power terminal unit (PTU) controllers designed to control various building automation applications. Designed to control equipment such as rooftop units, fan coils, heat pumps, ventilator units and terminal units, the ECP- PTU Series can also be used for any lighting control and power measurement applications. The uses the LonTalk communication protocol and is LONMARK certified using the Sensor profile (#1) for its input objects and the Actuator profile (#3) for its output objects. The ECP-PTU wireless series features an integrated wireless receiver that can be used with a variety of wireless sensors and contacts. Distech Controls products offer sophisticated features within a user-friendly interface and this is why ease-of-use has been made their primary characteristic. The can be programmed by using either the EC-gfxProgram graphical programming interface or the EC-Program configuration tool. Both programming tools are available as a plug-in used by any LONWORKS-based software such as Distech Controls Lonwatcher or as a wizard used by a multi-protocol platform software supporting LONWORKS devices such as Distech Controls EC-Net AX Pro powered by the Niagara AX Framework. Distech Controls EC-gfxProgram is a state-of-the-art building automation system programming tool that replaces textual coding with object-oriented programming. The block object toolbox is a vast library of components and functions that users can simply drag and drop to create a control sequence. EC-gfxProgram was developed with Windows user interface (UI) standards using Visual Basic.Net. The EC-Program plug-in is unique in the controls industry because it combines a userfriendly interface with the power and flexibility of a code editor and compiler. Distech Controls EC-Program plug-in uses a unique and simplified version of BASIC that has been developed in-house and that is custom made to suit controls requirements. 1. Available only when programmed with EC-gfxProgram.

2 Product Warranty & Total Quality Commitment All Distech Controls product lines are built to meet rigorous quality standards and carry a two-year warranty. Distech Controls is an ISO 9001 registered company. Distech Controls' products provide both the contractor and the end user with the flexibility of using best-ofbreed products in system design. Available Controller Models ECP-PTU 14-Point High-Voltage Programmable Power Terminal Unit Controller - 6 universal inputs - 4 digital relay outputs (up to 277VAC) - 4 digital (triac) outputs (up to 265VAC ECP-PTU-W 14-Point High-Voltage Programmable Power Terminal Unit Wireless Controller Same as ECP-PTU but with integrated 868.3MHz receiver with internal antenna. Not intended for installation inside of a metal enclosure. ECP-PTU ECP-PTU-W (with External Antenna) 14-Point High-Voltage Programmable Power Terminal Unit Wireless Controller Same as ECP-PTU but with integrated 868.3MHz receiver with external antenna. Recommended when installed in a metal enclosure. All controller models requiring the external antenna must have the antenna ordered at the initial purchase. The external antenna cannot be added to the controller at a later time.

3 Supported Platforms LONWORKS Network Services (LNS) LNS is a client-server platform that allows multiple users, running different LNS-compatible applications, to access a common source for directory, installation, management, monitoring and control services for the network system being managed. Distech Controls Lonwatcher is an example of a LonWorks-based network management tools that can use Plug-Ins to configure and monitor controllers and devices in the control system. Niagara AX Framework The Niagara AX Framework is the next generation of Niagara that builds on the multi-protocol, web-based concept of its predecessor. Niagara AX normalizes the development environment for building new software. Distech Controls EC-Net AX Pro is a multi-protocol software platform that can use Wizards to configure and monitor controllers and devices in the control system. Distech Controls Software LNS Plug-Ins and EC-Net AX Wizards EC-gfxProgram Graphical Programming Tool Distech Controls EC-gfxProgram is a programming tool that allows for the building of control sequences by dragging and dropping block objects and then linking the objects with a simple click, select and release. Choose the desired block objects from a vast library of commonly used functions as well as designing custom blocks. With a user-friendly interface and intuitive programming environment, EC-gfxProgram makes HVAC programming easier than ever. Refer to the EC-gfxProgram datasheet for more information. EC-Program Programming Tool Distech Controls EC-Program is unique in the controls industry because it combines a user-friendly GUI (Graphical User Interface) with the power and flexibility of a code editor and compiler. The EC-Program configuration tool uses a special and simplified version of BASIC that has been developed in-house and that is custom made to suit control requirements. Refer to the EC-Program datasheet for more information. EC-gfxProgram Software features: Block-oriented programming Live debugging allows user to view code execution, input/output values and to detect errors in real-time EC-Program Software features: Line-by-line programming High-precision integers with 2 decimals places (± ) Uses integers ranging from ±32767 Direct support of SNVTs of 1 and 2 bytes (17 NVIs & 17 NVOs; changeable type and length) 5 NVI Fan-in bindings (changeable type) 3 NVI Hisel, Lowsel, Sum and Average (up to 85 NVs) 2 NVI Hisel and Lowsel 16 PID loops 2 Schedules. 2 changeable type and length NVI and NVO. Supported types are: SNVT_tod_event; SNVT_occupancy; and SNVT_hvac_mode Extensive block library of the most commonly used functions divided into 11 convenient categories containing over 80 block objects A code library to store favorite or most commonly used code or code sections Built-in screen to view and configure internal point values such as variables, constants, etc. 18 NVIs and 18 NVOs; changeable type and length 2 NVI Fan-in bindings 1 NVI High and Low selection 1 NVI Weighted Average 10 PID loops 4 Schedules. 4 changeable type and length NVO. Supported types are: SNVT_tod_event; SNVT_occupancy; and SNVT_hvac_mode Programming functions such as Reserved Words (SQRT, SWITCH, LIMIT, etc.) Up to 24 trend log objects for a total of 12,000 stored events in the controller Other Configuration Software EC-Scheduler Tool Distech Controls EC-Scheduler allows users to easily configure a week-based schedule and a special day schedule for holidays. Easily add and remove the special day event into the calendar by a simple click of the mouse! RTC Configuration Tool Distech Controls RTC Configuration Tool allows users to manage the time, date and daylight saving time for use with any device on the network.

4 Recommended Peripherals Supported Smart-Sensors (EC-gfxProgram Only) EC-Smart-Sensor-100: Occupancy override EC-Smart-Sensor-FC: Fan speed selection EC-Smart-Sensor-200: Fan speed selection Occupancy override HVAC mode selection EC-Smart-Sensor-FC-CF: Fan speed selection C/ F toggle button Temperature Sensors EC-SENSOR EC-SENSOR-LO EC-SENSOR-SLO-F EC-SENSOR-SLO-C EC-SENSOR-SLO-CW EC-SENSOR-AVG Room temperature sensor Room temperature sensor with LED and override push button Room temperature sensor with LED, override push button and setpoint adjustment ( F) Room temperature sensor with LED, override push button and setpoint adjustment ( C) Room temperature sensor with LED, override push button and setpoint adjustment (cool/warm) Averaging room temperature sensor, no setpoint (Up to 3 in parallel) Wireless Sensors (Wireless controllers with EC-gfxProgram only) SR04 Series Wireless, solar-cell powered room temperature sensor with optional setpoint adjustment, override button and fan speed control. SR04 rh Series Wireless, solar-cell powered room temperature/humidity sensor with optional setpoint adjustment and override button. SR65 Wireless, solar-cell powered outdoor temperature sensor. SR65 VFG Wireless, solar-cell powered surface temperature contact sensor. SR65 AKF Series Wireless, solar-cell powered duct temperature sensor. SR-PIR 360 Wireless motion detector. 2-channel Light Switch 4-channel Light Switch 2-/4-channel wireless light switches (European models). PTM265 PTM265D 2-/4-channel wireless light switched (North American models). For more information on these or other peripherals please refer to our web site at or contact.

5 Product Specifications Product Specifications Power Wireless Receiver 1 Voltage: VAC; 50/60HZ; Over-voltage category II Wireless Receiver: EnOcean RCM MHz Pollution degree 2 Number of Wireless Inputs: 5 14 Protection: 2.0A Fast-acting breaking capacity fuse Inputs ECP-PTU series: Quantity: 6 - Maximum Consumption: 20VA Input Types: Universal (software configurable) Double insulation devices -Voltage: 0-10VDC -Current: 4-20mA with 249Ω external resistor Environmental (wired in parallel) Operating Temperature: 0 o C to 50 o C; 32 o F to 122 o F (indoor use) -Digital: Dry contact Storage Temperature: -20 o C to 70 o C; -4 o F to 158 o F -Pulse: Dry contact; 500ms minimum ON/OFF Relative Humidity: 0 to 90% Non-condensing -Resistor: General Thermistor 2 : 10KΩ Type 2, 3 Processor: Neuron 3150; 8 bits; 10MHZ Range: -40 o C to 150 o C; -40 o F to 302 o F Memory: Non-volatile Flash 64K (APB application) Platinum: Pt1000 (1KΩ) Non-volatile Flash 128K (Storage) Range: -40 o C to 150 o C; -40 o F to 302 o F Communication: LonTalk protocol Pt100 (100Ω) Channel: TP/FT-10; 78Kbps Range: -40 o C to 135 o C; -40 o F to 275 o F Status Indicator: Green LEDs: power status & LON TX Nickel 3 : Ni1000 (1KΩ) Orange LEDs: service & LON RX Range: -40 o C to 150 o C; -40 o F to 302 o F Communication Jack: LON audio jack mono 1/8" (3.5mm) Potentiometer: Translation table configurable on several points Enclosure Input Resolution: 16-bit analog / digital converter Material: Color: ABS type PA-765A Blue casing & grey connectors Dimensions overall: 7.7 x 4.7 x 2.0 (195.6mm x 119.4mm x 50.8mm) Outputs Measurement Category: CAT I Shipping Weight: 1.17lbs (0.53kg) Quantity: 8 Installation: Direct din-rail mounting or wall mounting through 3 Digital Relay Contacts: Up to 277VAC, N.O. contacts mounting holes (see figure above for hole positions) (Fan Speeds) 3A (inductive or resistive) Electromagnetic Compatibility All share the same common CE -Emission: EN : 2001; Generic standards for 1 Digital Relay Contact: Up to 277VAC, N.O. contacts residential, commercial and light-industrial (Heater) 3A (inductive) and 10A (resistive) environments Dedicated common -Immunity: EN : 2001; Generic standards for 4 Digital: VAC Triac (digital - on/off, floating 3 residential, commercial and light-industrial or PWM) environments - PWM control: adjustable period from FCC: This device complies with FCC rules 2 seconds to 15 minutes part 15, subpart B, class B - Floating control: requires two consecutive outputs 3 Agency Approvals - Min pulse on/off: 500msec. - Adjustable drive time period UL Listed (CDN & US): UL Process Control Equipment, Electrical Protect the output with an external 4A fast-acting, Material 4 : UL94-5VA high-breaking fuse. 1 common per pair of outputs 1. Available only on the ECP-PTU-W model and when programmed with EC-gfxProgram. 2. For temperature type inputs it is recommended that a 10KΩ thermistor be used due to better accuracy over the Pt1000, Pt100 or Ni Available only when programmed with EC-gfxProgram. 4. All materials and manufacturing processes comply with the Waste Electrical and Electronic Equipment (WEEE) directive and the RoHS directive. 5. Some wireless sensors may use more than one wireless input from the controller.

6 Functional Profile (with EC-gfxProgram) Functional Profile (with EC-Program) Specifications subject to change without notice. Distech Controls logo is a trademark of Distech Controls Inc.; LONMARK, LONWORKS, LonTalk, LON and LNS are registered trademarks of Echelon Corporation; Niagara AX Framework is a registered trademark of Tridium, Inc.; Windows, Visual Basic.Net is a registered trademark of Microsoft Corporation. *05DI-DSEPTUX-20* 05DI-DSEPTUX-20

ECP-VAV Series. ECP-VAV Series. 10-Point Single Duct VAV / VVT Free Programmable Controller. Applications. Features

ECP-VAV Series. ECP-VAV Series. 10-Point Single Duct VAV / VVT Free Programmable Controller. Applications. Features ECP-VAV Series 10-Point Single Duct VAV / VVT Free Programmable Controller Applications Designed to meet the requirements of single duct variable air volume (VAV) or variable volume according to temperature

More information

LONMARK Certified 28-Point Programmable Controllers. Overview

LONMARK Certified 28-Point Programmable Controllers. Overview Datasheet LONMARK Certified 28-Point Programmable Controllers Applications Meets the requirements of the following applications: Air Handling Units Multi-Zone Applications Chillers Boilers Cooling Towers

More information

Datasheet. ECB-600 and ECx-400 Series. ECB-600 & ECx-400. Overview. Applications. Features & Benefits.

Datasheet. ECB-600 and ECx-400 Series. ECB-600 & ECx-400. Overview. Applications. Features & Benefits. Datasheet ECB-600 and ECx-400 Series BACnet Programmable Controllers and I/O Extension Modules Overview Applications Meets the requirements of the following applications: Central Plant Air Handling Units

More information

Datasheet ECB /6. BACnet B-ASC 10-Point Programmable Controller. Overview

Datasheet ECB /6. BACnet B-ASC 10-Point Programmable Controller. Overview Datasheet BACnet B-ASC 10-Point Programmable Controller Overview Applications Meets the requirements of the following applications: Fan Coil Units Heat Pumps Unit Ventilators Chilled Ceilings Improves

More information

LONMARK Certified 18-Point Programmable Controller. Overview

LONMARK Certified 18-Point Programmable Controller. Overview LONMARK Certified 18-Point Programmable Controller Applications Meets the requirements of the following applications: Air Handling Units Chillers Boilers Cooling Towers Heat-Exchangers Pumps Lighting Control

More information

Datasheet ECB /6. BACnet B-ASC 10-Point Programmable Controller. Overview

Datasheet ECB /6. BACnet B-ASC 10-Point Programmable Controller. Overview Datasheet ECB-103 BACnet B-ASC 10-Point Programmable Controller Overview Applications Meets the requirements of the following applications: Fan Coil Units Heat Pumps Unit Ventilators Chilled Ceilings Improves

More information

Datasheet. ECB-203 Series. 1/6. BACnet B-ASC 14-Point Programmable Controllers. Overview

Datasheet. ECB-203 Series.  1/6. BACnet B-ASC 14-Point Programmable Controllers. Overview Datasheet ECB-203 Series BACnet B-ASC 14-Point Programmable Controllers Overview Applications Meets the requirements of the following applications: Rooftop Units Fan Coil Units Chilled Ceilings Heat Pumps

More information

Datasheet. ECB-PTU Series. 1/14. BACnet B-ASC Powered Terminal Unit Programmable Controllers. Overview

Datasheet. ECB-PTU Series.  1/14. BACnet B-ASC Powered Terminal Unit Programmable Controllers. Overview Datasheet BACnet B-ASC Powered Terminal Unit Programmable Controllers Overview Applications Meets the requirements of the following applications: Fan Coil Units Heat Pumps Chilled Beams Reversible Ceiling

More information

Datasheet. ECB-300 Series. 1/6. BACnet B-AAC 18-Point Programmable Controllers. Overview

Datasheet. ECB-300 Series.  1/6. BACnet B-AAC 18-Point Programmable Controllers. Overview Datasheet ECB-300 Series BACnet B-AAC 18-Point Programmable Controllers Overview Applications Meets the requirements of the following applications: Air Handling Units Chillers Boilers Cooling Towers Heat-Exchangers

More information

LN Series Remote Input/Output (I/O) Modules

LN Series Remote Input/Output (I/O) Modules LN Series Remote Input/Output (I/O) Modules Product Bulletin LN-IO301-1, LN-IO401-1, LN-IO520-1 Code No. LIT-12011316 Issued June 5, 2012 Supersedes November 9, 2007 The LN Series Remote Input/Output (I/O)

More information

BACnet B-ASC Powered Terminal Unit Programmable Controllers. Overview

BACnet B-ASC Powered Terminal Unit Programmable Controllers. Overview Datasheet BACnet B-ASC Powered Terminal Unit Programmable Controllers Applications Meets the requirements of the following applications: Fan Coil Units Heat Pumps Chilled Beams Reversible Ceiling with

More information

ECB-VAVS and ECB-VAV Series

ECB-VAVS and ECB-VAV Series ECB-VAVS and ECB-VAV Series BACnet B-ASC VAV / VVT Controllers Overview Applications Meets the requirements of single duct VAV zone applications, including: Cooling Only VAV Boxes Cooling with Reheat VAV

More information

Overview. Integrated fail-safe mode in case of communication or power failure to comply with most regulation requirements

Overview. Integrated fail-safe mode in case of communication or power failure to comply with most regulation requirements Datasheet Lighting and Sunblind Expansion Modules Overview Applications When connected to any compatible HVAC programmable controller, the ECx-Light/Blind expansion modules allow to control up to 8 lights

More information

LX Series Free Programmable LX-PRG6x0-11 Controllers and LX Series Input/Output (I/O) Extension Modules

LX Series Free Programmable LX-PRG6x0-11 Controllers and LX Series Input/Output (I/O) Extension Modules LX Series Free Programmable LX-PRG6x0-11 Controllers and LX Series Input/Output (I/O) Extension Modules Product Bulletin LX-PRG600-11, LX-PRG610-11, LX-IOE400-0 LX-IOE410-0, LX-IOE420-0 Code No. LIT-12011854

More information

LX Series Remote Input/Output (I/O) Controller

LX Series Remote Input/Output (I/O) Controller LX Series Remote Input/Output (I/O) Controller Product Bulletin LX-IO520-1, LX-IO401-1, LX-IO301-1 Code No. LIT-12011491 Issued June 22, 2009 The LX Series Remote Input/Output (I/O) controller extends

More information

LN Series Free Programmable LN-PRG6x0-12 Controllers and LN Series Input/Output (I/O) Extension Modules

LN Series Free Programmable LN-PRG6x0-12 Controllers and LN Series Input/Output (I/O) Extension Modules LN Series Free Programmable LN-PRG6x0-12 Controllers and LN Series Input/Output (I/O) Extension Modules Product Bulletin LN-PRG600-12, LN-PRG610-12, LN-IOE400-0 LN-IOE410-0, LN-IOE420-0 Code No. LIT-12011800

More information

ECB-203 Series BACnet B-ASC 14-Point Programmable Controllers

ECB-203 Series BACnet B-ASC 14-Point Programmable Controllers Datasheet ECB-203 Series BACnet B-ASC 14-Point Programmable Controllers Overview Features & Benefits The ECB-203 Series controllers are microprocessor-based programmable controllers designed to control

More information

Overview. Seen as an extension of the main HVAC controller when configuring, allowing you to save engineering time.

Overview. Seen as an extension of the main HVAC controller when configuring, allowing you to save engineering time. Datasheet Lighting Expansion Modules Overview Applications On/Off lighting 1-10 V dimming lighting The Expansion Modules are microprocessor-based interfaces that extend the number of inputs and outputs

More information

LX Series Free Programmable Controllers

LX Series Free Programmable Controllers Code No. LIT-1900565 Issued November 5, 2012 LX-PRG203-1, LX-PRG300-1, LX-PRG4x0-1, LX-PRG5x0-1 LX Series Free Programmable Controllers Description The LX Series Free Programmable Controllers are microprocessor-based

More information

LONMARK Certified Powered Fan Coil Configurable Controllers. Overview

LONMARK Certified Powered Fan Coil Configurable Controllers. Overview Datasheet RCL-PFC Series LONMARK Certified Powered Fan Coil Configurable Controllers Overview Applications Meets the requirements of the following applications: Fan Coil Units Unit Ventilators Chilled

More information

Overview. Seen as an extension of the main HVAC controller when configuring, allowing you to save engineering time.

Overview. Seen as an extension of the main HVAC controller when configuring, allowing you to save engineering time. Datasheet Shades / Sunblinds Expansion Modules Overview Applications 100-240 VAC shades / sunblinds 24 VDC shades / sunblinds The Expansion Modules are microprocessor-based interfaces that extend the number

More information

ECB-300 Series BACnet B-AAC 18-Point Programmable Controllers

ECB-300 Series BACnet B-AAC 18-Point Programmable Controllers D a t a s h e e t ECB-300 Series BACnet B-AAC 18-Point Programmable Controllers Overview The ECB-300 Series controllers are microprocessor-based programmable controllers designed to control equipment such

More information

ECL-103 LONMARK Certified 10-Point Programmable Controller

ECL-103 LONMARK Certified 10-Point Programmable Controller Datasheet ECL-103 LONMARK Certified 10-Point Programmable Controller Overview Features & Benefits The ECL-103 is a microprocessor-based programmable controller designed to control terminal units such as

More information

Allure EC-Smart-Comfort Series

Allure EC-Smart-Comfort Series Datasheet Allure EC-Smart-Comfort Series Communicating sensors with Smart-Light and Smart-Blind add-on modules Overview Features & Benefits The Allure EC-Smart-Comfort Series are versatile communicating

More information

ECL-400 Series LONMARK Certified 24-Point Programmable Controllers

ECL-400 Series LONMARK Certified 24-Point Programmable Controllers D a t a s h e e t ECL-400 Series LONMARK Certified 24-Point Programmable Controllers Overview The ECL-400 Series controllers are microprocessor-based programmable controllers designed to control various

More information

LONMARK Certified 10-Point Programmable Controller. Overview

LONMARK Certified 10-Point Programmable Controller. Overview Datasheet ECL-103 LONMARK Certified 10-Point Programmable Controller Overview Applications Meets the requirements of the following applications: Fan Coil Units Heat Pumps Unit Ventilators Chilled Ceilings

More information

LONMARK Certified 24-Point Programmable Controllers. Overview

LONMARK Certified 24-Point Programmable Controllers. Overview Applications Meets the requirements of the following applications: Air Handling Units Multi-Zone Applications Chillers Boilers Cooling Towers Roof Top Units Improves energy efficiency when combined with:

More information

Allure EC-Smart-Comfort Series

Allure EC-Smart-Comfort Series Datasheet Allure EC-Smart-Comfort Series Communicating sensors with Smart-Light and Smart-Blind add-on modules Overview The Allure EC-Smart-Comfort series are versatile communicating sensor which provide

More information

Datasheet. ECB-VAV Series. 1/8. BACnet B-ASC Single Duct VAV / VVT Controllers. Overview

Datasheet. ECB-VAV Series.   1/8. BACnet B-ASC Single Duct VAV / VVT Controllers. Overview Datasheet ECB-VAV Series BACnet B-ASC Single Duct VAV / VVT Controllers Applications Meets the requirements of VAV zone applications, including: Cooling Only VAV Boxes Cooling with Reheat VAV Boxes Parallel

More information

Specification Sheet For electronically commutated motors

Specification Sheet For electronically commutated motors SC-VAV-N Specification Sheet For electronically commutated motors Used in constant pressure applications The SC-EFC is designed to control exhaust air in various building applications. The system includes

More information

Datasheet. ECB-VAV Series. 1/8. BACnet B-ASC Single Duct VAV / VVT Controllers. Overview

Datasheet. ECB-VAV Series.   1/8. BACnet B-ASC Single Duct VAV / VVT Controllers. Overview Datasheet BACnet B-ASC Single Duct VAV / VVT Controllers Overview Applications Meets the requirements of VAV zone applications, including: Cooling Only VAV Boxes Cooling with Reheat VAV Boxes Parallel

More information

ECB-VAVS. Features and Benefits. Applications Cooling Only VAV Boxes Cooling with Reheat VAV Boxes Room Pressurization.

ECB-VAVS. Features and Benefits. Applications Cooling Only VAV Boxes Cooling with Reheat VAV Boxes Room Pressurization. D a t a s h e e t ECB-VAVS Overview The ECB-VAVS controllers are microprocessorbased programmable variable air volume (VAV) controllers designed to control cooling only and cooling with reheat single duct

More information

ECL-VAV LONMARK Certified VAV Controller

ECL-VAV LONMARK Certified VAV Controller D a t a s h e e t ECL-VAV LONMARK Certified VAV Controller Overview The ECL-VAV Series controllers are microprocessor-based programmable variable air volume (VAV) controllers designed to control any variable

More information

BTL -listed WSP-Certified Powered Fan Coil Configurable Controllers. Overview

BTL -listed WSP-Certified Powered Fan Coil Configurable Controllers. Overview Datasheet BTL -listed WSP-Certified Powered Fan Coil Configurable Controllers Overview The are microprocessor-based configurable controllers designed to control a wide variety of terminal units such as

More information

TAC Xenta 121-FC Programmable Fan Coil Application

TAC Xenta 121-FC Programmable Fan Coil Application TAC Vista TAC Xenta 121-FC Programmable Fan Coil Application TAC Xenta 121-FC is an easily programmable controller intended for both 2-pipe and 4-pipe applications, with or without re-heat. It can be configured

More information

LonMark Certified 18-Point Programmable Controllers. Overview

LonMark Certified 18-Point Programmable Controllers. Overview Datasheet LonMark Certified 18-Point Programmable Controllers Overview Applications Meets the requirements of the following applications: Air Handling Units Chillers Boilers Cooling Towers Heat Exchangers

More information

LonMark Certified 10-Point Programmable Controller. Overview

LonMark Certified 10-Point Programmable Controller. Overview Datasheet LonMark Certified 10-Point Programmable Controller Overview Applications Meets the requirements of the following applications: Fan Coil Units Heat Pumps Unit Ventilators Chilled Ceilings Improves

More information

TAC Xenta 121-HP Programmable Heat Pump Application

TAC Xenta 121-HP Programmable Heat Pump Application TAC Vista TAC Xenta 121-HP Programmable Heat Pump Application TAC Xenta 121-HP is an easily programmable controller intended for heat pumps, with or without re-heat. It can be configured for use with 1,

More information

Datasheet. BACnet PFC Demo Case. 1/8. Distech Controls BACnet solution demo case. Overview

Datasheet. BACnet PFC Demo Case.  1/8. Distech Controls BACnet solution demo case. Overview Datasheet BACnet PFC Demo Case Distech Controls BACnet solution demo case Overview The BACnet PFC demo case is a simple and plug-and-play tool for qualitative and representative demonstrations aimed at

More information

ECB-VAV BACnet B-ASC VAV Controller

ECB-VAV BACnet B-ASC VAV Controller D a t a s h e e t ECB-VAV BACnet B-ASC VAV Controller Overview The ECB-VAV Series controllers are microprocessor-based programmable variable air volume (VAV) controllers designed to control any variable

More information

TAC Xenta 101-VF. 3-Speed Fan Coil Controller. TAC Xenta

TAC Xenta 101-VF. 3-Speed Fan Coil Controller. TAC Xenta TAC Xenta TAC Xenta 101-VF 3-Speed Fan Coil Controller TAC Xenta 101-VF is a zone controller intended primarily for fan coil applications with the ability to control fans with multiple speeds, with one

More information

LonMark Certified 14-Point Programmable Controllers. Overview

LonMark Certified 14-Point Programmable Controllers. Overview Datasheet LonMark Certified 14-Point Programmable Controllers Overview Applications Meets the requirements of the following applications: Rooftop Units Fan Coil Units Chilled Ceilings Heat Pumps Unit Ventilators

More information

LN Application Specific, Remote I/O, and Free Programmable Controllers

LN Application Specific, Remote I/O, and Free Programmable Controllers LN Application Specific, Remote I/O, and Free Programmable Controllers Installation Instructions LN-RTUL-1, LN-FCUL-1, LN-UVL-1, LN-HPUL-1, LN-IOxxx-1, LN-PRG203-2, LN-PRG300-2, LN-PRG4x0-2, LN-PRG5x0-2

More information

TAC Xenta 301. Controller, Freely Programmable

TAC Xenta 301. Controller, Freely Programmable TAC Xenta TAC Xenta 300 Controller, Freely Programmable TAC Xenta 300 belongs to a family of freely programmable controllers designed for small and medium-sized heating and air handling systems. A TAC

More information

Stryker Lon Configurable Controllers

Stryker Lon Configurable Controllers Stryker Lon Configurable Controllers SPECIFICATION DATA FEATURES GENERAL The CVL4022AS-VAV1 and CVL4024NS-VAV1 controllers are part of the Stryker family. The controllers are Free Topology Transceiver

More information

ECLYPSE Communication Modules

ECLYPSE Communication Modules Datasheet ECLYPSE Communication Modules Overview Features & Benefits Communication modules enable ECLYPSE Connected Controllers to communicate with a variety of devices. Scalable and Modular An ECY-RS485

More information

Shipping Now! Benefit from Unprecedented Adaptability! RCL/RCB-PFC Series Shipping Today!

Shipping Now! Benefit from Unprecedented Adaptability! RCL/RCB-PFC Series Shipping Today! Shipping Notification Document RCL/RCB-PFC Series November, 2012 RCL/RCB-PFC Series Shipping Today! + Shipping Now! Benefit from Unprecedented Adaptability! Inside System Architecture... 3 Benefit from

More information

ECLYPSE Communication Modules

ECLYPSE Communication Modules Datasheet ECLYPSE Communication Modules Overview Features & Benefits Communication modules enable ECLYPSE Connected Controllers to communicate with a variety of devices. Scalable and Modular An ECY-RS485

More information

ECLYPSE Connected Terminal Unit Controller

ECLYPSE Connected Terminal Unit Controller Datasheet ECLYPSE Connected Terminal Unit Controller Overview The ECLYPSE Connected Terminal Unit Controller is designed to control terminal units such as fan coil units, chilled beams, ceilings, and heat

More information

Datasheet. Smart-Sense Room Control. 1/6. Remote Room Control Application for iphone, ipad, and Android devices.

Datasheet. Smart-Sense Room Control.  1/6. Remote Room Control Application for iphone, ipad, and Android devices. Datasheet Smart-Sense Room Room Application for iphone, ipad, and Android devices Overview Applications The Smart-Sense Room application provides precise environmental zone control for temperature, fan

More information

Tracer Controllers. Tracer MP503 Input/Output Module BAS-PRC009-EN. January 2005

Tracer Controllers. Tracer MP503 Input/Output Module BAS-PRC009-EN. January 2005 Tracer Controllers Tracer MP503 Input/Output Module January 2005 BAS-PRC009-EN Introduction The Tracer MP503 input/output (I/O) module is a configurable, multi-purpose device used to provide data monitoring

More information

Tracer Controls. Tracer MP.501 Controller BAS-PRC008-EN. June 2001

Tracer Controls. Tracer MP.501 Controller BAS-PRC008-EN. June 2001 Tracer Controls Tracer MP.501 Controller June 2001 BAS-PRC008-EN Introduction The Tracer MP.501 controller is a configurable, multi-purpose controller used to provide direct-digital control for heating,

More information

Datasheet. RCL-Light/Blind Series. 1/8. LonMark Certified Configurable Lighting and Sunblind Controllers.

Datasheet. RCL-Light/Blind Series.  1/8. LonMark Certified Configurable Lighting and Sunblind Controllers. Datasheet LonMark Certified Configurable Lighting and Sunblind Controllers Overview Applications Meets the requirements of the following applications: On/Off Lighting Dimmable Lighting 24 VDC Sunblinds

More information

ECLYPSE Connected System Controller

ECLYPSE Connected System Controller Datasheet ECLYPSE Connected System Controller Overview Features & Benefits The ECLYPSE Connected System Controller is a modular and scalable platform used to control a wide range of HVAC applications.

More information

ECLYPSE Connected Terminal Unit Controller

ECLYPSE Connected Terminal Unit Controller Datasheet ECLYPSE Connected Terminal Unit Controller Overview Applications The ECLYPSE Connected Terminal Unit Controller (ECY-(P)TU) is designed to control terminal units such as fan coil units, chilled

More information

Product Catalog. Tracer Controls Tracer ZN517 Unitary Control BAS-PRC012-EN. August 2010

Product Catalog. Tracer Controls Tracer ZN517 Unitary Control BAS-PRC012-EN. August 2010 Product Catalog Tracer Controls Tracer Unitary Control August 2010 BAS-PRC012-EN Introduction The Tracer unitary controller provides digital control that is similar to that of a wall thermostat. It supports

More information

ECLYPSE Connected System Controller

ECLYPSE Connected System Controller Datasheet ECLYPSE Connected System Controller Overview Features & Benefits The ECLYPSE Connected System Controller is a modular and scalable platform used to control a wide range of HVAC applications.

More information

Tracer Controls. Tracer MP501 Controller BAS-PRC008-EN. January 2005

Tracer Controls. Tracer MP501 Controller BAS-PRC008-EN. January 2005 Tracer Controls Tracer MP501 Controller January 2005 BAS-PRC008-EN Introduction The Tracer MP501 controller is a configurable, multi-purpose controller used to provide direct-digital control for heating,

More information

Hardware Installation. Tracer MP581 Programmable Controller CNT-SVN01C-EN

Hardware Installation. Tracer MP581 Programmable Controller CNT-SVN01C-EN Hardware Installation Tracer MP581 Programmable Controller CNT-SVN01C-EN Hardware Installation Tracer MP581 Programmable Controller CNT-SVN01C-EN November 2005 Tracer MP581 Programmable Controller Hardware

More information

Viconics VT76x6W Water-source Heat Pump Controllers Engineering Guide Specification

Viconics VT76x6W Water-source Heat Pump Controllers Engineering Guide Specification Viconics VT76x6W Water-source Heat Pump Controllers Engineering Guide Specification General The VT76xxW series is designed for single-stage and multi-stage control of water source heat pumps with dedicated

More information

ECLYPSE nlight Solution

ECLYPSE nlight Solution Datasheet ECLYPSE nlight Solution nlight protocol Solution for ECLYPSE Connected System Controllers Figure 1: ECLYPSE nlight Solution shown with the power supply module, server module, and nlight communication

More information

Tracer Controls. Tracer ZN517 Unitary Controller BAS-PRC012-EN

Tracer Controls. Tracer ZN517 Unitary Controller BAS-PRC012-EN Tracer Controls Tracer Unitary Controller 7 April 2003 BAS-PRC012-EN Introduction The Tracer unitary controller provides digital control that is similar to that of a wall thermostat. It supports the following

More information

ECC-VAVS and ECC-VAV Series

ECC-VAVS and ECC-VAV Series LONMARK Certified Single Duct VAV/VVT Configurable Controllers Applications Designed to meet the requirements of single duct VAV zone applications, including: Cooling Only VAV Boxes Cooling with Reheat

More information

clarity 3 Programmable Controller

clarity 3 Programmable Controller clarity 3 Programmable Controller BACnet General Purpose Controllers (B-AAC) DESCRIPTION Taco Clarity 3 FPC series controllers are designed to control building systems and HVAC equipment. The integrated

More information

Product Catalog. Tracer Controller MP501 BAS-PRC008-EN. May 2012

Product Catalog. Tracer Controller MP501 BAS-PRC008-EN. May 2012 Product Catalog Tracer Controller MP501 May 2012 BAS-PRC008-EN Copyright 2012 Trane. All rights reserved. This document and the information in it are the property of Trane and may not be used or reproduced

More information

Tracer Controllers. Tracer MP503 Input/Output Module BAS-PRC009-EN. September 2001

Tracer Controllers. Tracer MP503 Input/Output Module BAS-PRC009-EN. September 2001 Tracer Controllers Tracer MP503 Input/Output Module September 2001 BAS-PRC009-EN Introduction The Tracer MP503 input/output (I/O) module is a configurable, multi-purpose device used to provide data monitoring

More information

TAC Xenta 280 UC-01 UC-02 UC-03

TAC Xenta 280 UC-01 UC-02 UC-03 TAC Xenta 280 UC-01 UC-02 UC-03 Programmable Controller 15 Dec 2002 TAC Xenta 280 belongs to a family of programmable controllers designed for Zone control or small sized heating and air handling systems.

More information

ECLYPSE Connected System Controller

ECLYPSE Connected System Controller ECLYPSE Connected System Controller D a t a s h e e t Overview The ECLYPSE Connected System Controller is a modular and scalable platform that is used to control a wide range of HVAC applications. It supports

More information

LN Series Free Programmable LN-PRGxxx-12 Controllers

LN Series Free Programmable LN-PRGxxx-12 Controllers LN Series Free Programmable LN-PRGxxx-12 Controllers Installation Instructions LN-PRG203-12, LN-PRG300-12, LN-PRG4x0-12, LN-PRG6x0-12 Code No. LIT-12011796 Issued April 24, 2014 Supersedes January 30,

More information

SLX Series. Application Specific Controllers (SLX-ASC-FCU-L, SLX-ASC-HPU-L, SLX-ASC-RTU-L, SLX-ASC-UV-L)

SLX Series. Application Specific Controllers (SLX-ASC-FCU-L, SLX-ASC-HPU-L, SLX-ASC-RTU-L, SLX-ASC-UV-L) SLX Series Document No. 997-1000 Application Specific Controllers (SLX-ASC-FCU-L, SLX-ASC-HPU-L, SLX-ASC-RTU-L, SLX-ASC-UV-L) Free Programmable Controllers (SLX-PC-203, SLX-PC-300, SLX-PC-400, SLX-PC-500

More information

Installation and Operation. Tracer MP501 Controller CNT-SVX08B-EN

Installation and Operation. Tracer MP501 Controller CNT-SVX08B-EN Installation and Operation Tracer MP501 Controller CNT-SVX08B-EN Installation and Operation Tracer MP501 Controller CNT-SVX08B-EN April 2005 CNT-SVX08B-EN Tracer MP501 Controller Installation and Operation

More information

RXB39.1. Room controller RXB. Communicating room controller for fan-coil applications FC-13

RXB39.1. Room controller RXB. Communicating room controller for fan-coil applications FC-13 s 3 875 RXB Room controller Communicating room controller for fan-coil applications FC-13 RXB39.1 The RXB39.1 room controller is used for temperature control in individual rooms. For 2-pipe or 4-pipe fan-coil

More information

ECLYPSE Series Connected IP and Wi-Fi Product Series and Accessories

ECLYPSE Series Connected IP and Wi-Fi Product Series and Accessories S o l u t i o n G u i d e Series IP and Product Series and Accessories Overview The series is a range of connected BACnet/IP controllers and accessories that are used to control a wide range of HVAC equipment

More information

Stryker Lon Configurable Controllers

Stryker Lon Configurable Controllers Stryker Lon Configurable Controllers SPECIFICATION DATA The Stryker controllers require the Stryker Feature to be licensed in the WEBpro workbench tool and the WEBS AX JACE Controller for programming and

More information

ECLYPSE Connected Terminal Unit Controller

ECLYPSE Connected Terminal Unit Controller Datasheet ECLYPSE Connected Terminal Unit Controller Overview Applications The ECLYPSE Connected Terminal Unit Controller (ECY-TU/PTU) is designed to control terminal units such as fan coil units, chilled

More information

RXC39.5. Room controller. Building Technologies. Desigo RXC. Communicating room controller for fan-coil applications

RXC39.5. Room controller. Building Technologies. Desigo RXC. Communicating room controller for fan-coil applications s 3 856 Desigo RXC Room controller RXC39.5 Communicating room controller for fan-coil applications The RXC39.5 room controller is used for temperature control in individual rooms. For fan-coil systems

More information

DESIGO RX Individual room controllers. for fan-coil systems, chilled ceilings and radiators, with LONMARK-compatible bus communications

DESIGO RX Individual room controllers. for fan-coil systems, chilled ceilings and radiators, with LONMARK-compatible bus communications 3 834 DESIO RX Individual room controllers for fan-coil systems, chilled ceilings and radiators, with MARK-compatible bus communications RXC20.1 RXC21.1 The RXC20.1 and RXC21.1 controllers are used for

More information

Lighting and Sunblind Control Solution. Open-to-Wireless TM : Wireless, Battery-less Sensing, Wireless Mesh Networks. Energy Management and Metering

Lighting and Sunblind Control Solution. Open-to-Wireless TM : Wireless, Battery-less Sensing, Wireless Mesh Networks. Energy Management and Metering 0UUV]H[P]L :VS\[PVUZ MVY.YLLULY )\PSKPUNZ;4 Our solutions are built from the ground up to deliver exacting performance meeting the strictest guidelines, achieving an unprecedented interoperable building

More information

TC-9102 Terminal Controller

TC-9102 Terminal Controller Metasys Network Sales Resource Manual 635 Application Specific Controllers Section Product Bulletin Issue Date 1095 TC-9102 Terminal Controller The TC-9102 Terminal Controller, the latest addition to the

More information

THERMOSTATS & CONTROLLERS

THERMOSTATS & CONTROLLERS DESCRIPTION The Belimo ZIP Economizer Series saves energy in buildings by using cool outside air as a means of cooling the indoor space. This application can drastically reduce HVAC energy costs while

More information

FX06 Field Controller

FX06 Field Controller Code No. LIT-1900406 Issued October 19, 2012 Facility Explorer FX06 Field Controller The FX06 is a high performance field controller designed specifically for commercial Heating, Ventilating, Air Conditioning,

More information

Onboard Inputs and Outputs. Remote User Interface. Integral LCD User Interface

Onboard Inputs and Outputs. Remote User Interface. Integral LCD User Interface Product Bulletin: FX06 Field Controller Issue Date: March 2006 FX06 Field Controller The FX06 is a compact field controller in the Facility Explorer range of products. The controller is designed specifically

More information

Scheduler Configuration Tool User Guide v3.0

Scheduler Configuration Tool User Guide v3.0 Scheduler Configuration Tool User Guide v3.0 Document Revision History: 1. Revision 1.0 - Initial release January 2004 2. Revision 2.0 May 2007 Added Lonwatcher start up section Added EC-Net AX Pro start

More information

FX Input/Output (I/O) Modules XM07 and XM14

FX Input/Output (I/O) Modules XM07 and XM14 Product Bulletin FX I/O Modules Issue Date July 6, 2009 FX Input/Output (I/O) Modules XM07 and XM14 The FX Input/Output (I/O) Modules provide additional physical input and output points for FX field controllers

More information

LX Series Application-Specific Controllers

LX Series Application-Specific Controllers LX Series Application-Specific Controllers Product Bulletin LX-FCUL-1, LX-RTUL-1,LX-HPUL-1, LX-UVL-1 Code No LIT-12011494 Issued June 22, 2009 The LX Series application-specific controller family includes

More information

RXM39.1. PL-Link IO Block. Desigo TRA. Use with PXC3 series room automation station

RXM39.1. PL-Link IO Block. Desigo TRA. Use with PXC3 series room automation station s 3 836 3836P01 Desigo TRA PL-Link IO Block Use with PXC3 series room automation station RXM39.1 The PL-Link IO Block contains the inputs and outputs controlled by a room automation station via PL-Link.

More information

Satchwell MicroNet. Building Management System MicroNet 50 Series

Satchwell MicroNet. Building Management System MicroNet 50 Series Satchwell MicroNet Building Management System MicroNet 50 Series MicroNet 50 Series THE NEW GENERATION OF MICRONET SOLUTIONS MicroNet is an easy-to-use, scaleable and modular building automation system

More information

LN Free Programmable PRG 600 Series Controllers

LN Free Programmable PRG 600 Series Controllers LN Free Programmable PRG 600 Series Controllers Installation Instructions LN-PRG600-2, LN-PRG610-2 Code No. LIT-12011691 Issued July 17, 2014 Refer to the QuickLIT website for the most up-to-date version

More information

MCX08M2 Programmable controller

MCX08M2 Programmable controller Data sheet MCX08M2 Programmable controller MCX08M2 is an electronic controller that holds all the typical functionalities of MCX controllers in the compact size of 8 DIN modules: programmability connection

More information

Hardware Installation Guide

Hardware Installation Guide Hardware Installation Guide BACnet Application Specific controller: ECB-203, ECB-300 and ECB-400 1. Product Description This document describes the hardware installation procedures for the ECB-series BACnet

More information

Programmable controller MCX06C

Programmable controller MCX06C MAKING MODERN LIVING POSSIBLE Technical brochure Programmable controller MCX06C Danfoss range of universal MCX programmable controllers offers the functionality and reliability you need to get the best

More information

DX-9100 Digital Controller, Version 2

DX-9100 Digital Controller, Version 2 Metasys European Sales Resource Manual Application Specific Controllers Section Product Bulletin Issue Date 1298 DX-9100 Digital Controller, Version 2 The DX-9100 Digital Controller is the ideal digital

More information

ComfortPoint Programmable Lon, VAV/Unitary Controllers

ComfortPoint Programmable Lon, VAV/Unitary Controllers ComfortPoint Programmable Lon, VAV/Unitary Controllers FEATURES SPECIFICATION DATA GENERAL The CP-UL1012S, CP-UL4024S, CP-UL6438S, CP-VL0000AS, CP-VL4022AS, CP-VL4024NS, CP-VL6436AS, and CP-VL6438NS controllers

More information

SEZ7000 Series. Wireless Commercial Zoning System

SEZ7000 Series. Wireless Commercial Zoning System SEZ7000 Series Wireless Commercial Zoning System A cost-effective, scalabe zoning system for the commercial market that delivers unparalleled flexibility via the ZigBee communication protocol. SEZ7000

More information

TALON Network Manager- 2 & 6 Express

TALON Network Manager- 2 & 6 Express Technical Specification Sheet October 30, 2010 TALON Network Manager- 2 & 6 Express Description The TALON Network Manager-2 & 6 Express (TNM-2 XPR and TNM-6 XPR) is an embedded controller/server platform

More information

Suitable for a wide range of installations with wall-mount, flush-mount and hand-held remote control options.

Suitable for a wide range of installations with wall-mount, flush-mount and hand-held remote control options. TUC03 Configurable Terminal Unit Controller Product Bulletin The TUC03 Configurable Terminal Unit Controller is designed specifically to provide direct digital control of terminal unit applications with

More information

LTEC Heat Pump DDC Controller

LTEC Heat Pump DDC Controller Document No. 09 Rev., May, 00 LTEC Heat Pump DDC Controller Product Description These instructions explain how to install or replace a LTEC (LonMark Terminal Equipment Controller) HP (Heat Pump) DDC Controller

More information

ECLYPSE Connected System

ECLYPSE Connected System Datasheet ECLYPSE Connected System Controller Overview Features & Benefits The ECLYPSE Connected System Controller (ECY-CSC) is a modular and scalable platform used to control a wide range of HVAC applications.

More information

LonMark Certified Powered Fan Coil Configurable Controllers. Overview

LonMark Certified Powered Fan Coil Configurable Controllers. Overview Datasheet LonMark Certified Powered Fan Coil Configurable Controllers Overview The are microprocessor-based configurable controllers designed to control a wide variety of terminal units such as powered

More information

Andover ContinuumTM. b3850 Series Terminal Controllers

Andover ContinuumTM. b3850 Series Terminal Controllers TM b3850 Series Terminal Controllers The TM b3850 series controllers are native BACnet controllers that communicate on an RS-485 field bus as Master devices using the MS/TP BACnet protocol. 02 Features

More information