VITA 67 Series. Ideal For Blind Mate Applications. Electrical, Mechanical & Environmental Specifications
|
|
|
- Bennett Singleton
- 6 years ago
- Views:
Transcription
1
2 VITA 67 Series Delta Electronics Manufacturing Corp. introduces 4 position (VITA 67.1) and 8 position (VITA 67.2) RF connector housings designed for 3U and 6U formats within the OpenVPX architecture. Ideal for blind mating daughtercards to motherboards, the SMPM RF contacts provide +/-.010 radial misalignment tolerance and excellent return loss up to 40 GHz. Precision machined from either stainless steel or aluminum, the 4 and 8 position housings are available with pre-loaded SMPM adapters or a cost effective, direct snap-in, cable mount SMPM contact. The right angle daughtercard solutions are offered with the direct snap-in SMPM contacts designed for both.047 and.086 flexible semi-rigid cable. Ideal For Blind Mate Applications 8 Position SMPM Housing Direct Snap-In SMPM Male Electrical, Mechanical & Environmental Specifications Electrical SMPM Contacts Characteristic Impedance: 50 ohms Operating Frequency: DC to 40 GHz VSWR: 1.25:1 TYP. DC to 26.5 GHz (Connectors Only) 1.4:1 TYP GHz to 40 GHz (Connectors Only) Insertion Loss: 0.12 * f (GHz), DC to 26.5 GHz Isolation: > 100 db, DC to 26.5 GHz Operating Voltage: 200 volts AC Mechanical Axial Travel:.079 Min Radial Float: ±.010 Min Engage Force: 3.5 lbs (typical per contact) Environmental Temperature Range: -55 to 105 C
3 VITA 67 Product Overview Vita 67 Applications VITA OpenVPX compliant solution. VITA 67.1: 4 position RF housing. VITA 67.2: 8 position RF housing. Housings machined from stainless steel or aluminum..240 center-to-center spacing. SMPM dimensions in accordance with Mil-STD-348. SMPM RF contacts operate to 40 GHz. Motherboard Solutions Vertical two-piece housings, 4 and 8 positions. Direct snap-in SMPM contacts. Designed for either.047 or.086 semi-rigid or flexible equivalent. Cost effective solution eliminating the need for adapters. Improved insertion loss and return loss versus adapter solution. Housings can be selectively loaded. Opposite end of SMPM direct snap-in cable assembly, can be terminated with a variety of Delta RF interfaces. Jack-to-Jack Adapters, within and between series. Daughterboard Solutions Right angle housings, 4 and 8 positions. Direct snap-in, floating SMPM contacts. Designed for either.047 or.086 Semi-Rigid or flexible equivalent. Cost effective solution eliminating the need for adapters. Housings can be selectively loaded. SMPM (Catchers Mitt) to SMPM (Full Detent) Adapters. SMPM (Catchers Mitt) to DM45 Jack Adapters. Housings can be selectively loaded.
4 VITA 67 Adapter Interconnects VITA 67 Series.104 ± ± ±.002 SMPM Catcher's Mitt Interface X ± ± ± ±.006 X 4 SMPM Full Detent Interface 8 X X 1/16 X 3/16 Sping Pins 2 X G SMPM Male (CM-SB) To SMPM Male (FD) Adapter Plate - 8 Positions (Passivate & Gold Plating) 4 Delta Electronics Mfg. Corp. deltarf.com sales@deltarf.com
5 VITA 67 Series VITA 67 Adapter Interconnects.053 ± ± ± SMPM Catcher's Mitt Interface 4X.245 ± ±.006 X x4 SMPM Full Detent Interface 4X 1/16 x 3/16 Spring Pin G SMPM Male (CM-SB) To SMPM Male (FD) Adapter Plate - 4 Positions (Passivate & Gold Plating) The Delta Difference - Delivering Interconnect Solutions That Make A Difference 5
6 VITA 67 Adapter Interconnects VITA 67 Series ± ± ±.002 SMPM CATCHER'S MITT INTERFACE - 8X.740 ± ±.010-8X DM45 FEMALE INTERFACE - 8X 6-40 UNF-2A THREADS - 8X THRU HOLE C'SINK 100º TO X 1/16 X 3/16 SPRING PINS - 2X.397 ±.006-8X.062 ± ± G SMPM Male (CM-SB) To DM 45 Female Adapter Plate - 8 Positions (Passivate & Gold Plating) 6 Delta Electronics Mfg. Corp. deltarf.com sales@deltarf.com
7 VITA 67 Series VITA 67 Adapter Interconnects ± ± ± ±.002 SMPM R.060 TYP CATCHER'S INTERFACE - 4X.740 ± ±.010-4X DM45 FEMALE INTERFACE - 4X 6-40 UNF-2A THREADS - 4X 1/16 X 3/16 SPRING PIN.138 ± ±.006-4X.062 ± G SMPM Male (CM-SB) To DM 45 Female Adapter Plate - 4 Positions (Passivate & Gold Plating) The Delta Difference - Delivering Interconnect Solutions That Make A Difference 7
8 VITA 67 Adapter Interconnects VITA 67 Series.033 Panel Thickness ± G Direct Snap-In SMPM Direct Solder Male - CM For.085 S.R. Cable (Gold Plating) 8 Delta Electronics Mfg. Corp. deltarf.com sales@deltarf.com
9 VITA 67 Series VITA 67 Adapter Interconnects.033 Panel Thickness Accepts Center Conductor G Direct Snap-In SMPM Direct Solder Male - CM For.047 S.R. Cable or Flex Cable (Gold Plating) The Delta Difference - Delivering Interconnect Solutions That Make A Difference 9
10 VITA 67 Adapter Interconnects VITA 67 Series.025 Panel Thicknes ± Accepts Center Conductor G Direct Snap-In Float Mount SMPM Direct Solder Female For.085 S.R. Cable (Gold Plating) 10 Delta Electronics Mfg. Corp. deltarf.com
11 VITA 67 Series VITA 67 Adapter Interconnects.025 Panel Thickness ± Accepts Center Conductor G Direct Snap-In Float Mount SMPM Direct Solder Female For.047 S.R. or Flex Cable (Gold Plating) The Delta Difference - Delivering Interconnect Solutions That Make A Difference 11
12 VITA 67 Connector Adapter Interconnects Type VITA 67 Series.164 X X ± ±.001 1/16 X 3/16 Spring Pin X Right Angle 8 Position SMPM Housing 12 Delta Electronics Mfg. Corp. deltarf.com sales@deltarf.com
13 VITA 67 Series Connector Type ± ± ±.001 X /16 X 3/16 Spring Pins X ± ± Vertical 8 Position SMPM Housing The Delta Difference - Delivering Interconnect Solutions That Make A Difference 13
14 VITA 67 Adapter Interconnects VITA 67 Series X x4 1/16 X 3/16 Spring Pin X ± ± Right Angle 4 Position SMPM Housing 14 Delta Electronics Mfg. Corp. deltarf.com sales@deltarf.com
15 VITA 67 Series VITA 67 Adapter Interconnects X /16 X 3/16 Spring Pins.170 ± ± Vertical 4 Position SMPM Housing The Delta Difference - Delivering Interconnect Solutions That Make A Difference 15
16 Delta Electronics Mfg. Corp PO Box Cabot St. Beverly, MA 01915
Connectors. High Performance to 65 GHz. Applications. PDF Volume 1. Click Here for Table of Contents Click Here for Specifications
SMP/SMPM Applications DELTA ELECTRONICS MANUFACTURING CORP. Connectors High Performance to 65 GHz PDF Volume 1 Click Here for Table of Contents Click Here for Specifications (978) 927-1060 FAX (978) 922-6430
SMP connectors. the easy connection. Products overview. Applications
Products overview PCB mount SMD mount plug and Centre pin in SMD, BGA or throughhole configurations Surface mount technology plug and Centre pin in SMD, BGA or throughhole configurations Bulkhead mount
Board Mount Connector Footprint Design Process
Board Mount Connector Footprint Design Process STEP 1: Connector Selection Series Force to Engage (Max) Max SB LD FD Freq. SMP 2.0 lbs 10 lbs 15 lbs 40 GHz SMPM 3.5 lbs N/A 8.0 lbs 65 GHz SMPS 3.0 lbs
Ganged Board to Board SMP Solutions. Catalog. belfuse.com/cinch
Ganged Board to Board SMP Solutions Catalog belfuse.com/cinch SMP CONNECTORS One of the key benefits of the SMP connector interface is its use in high frequency blind-mate applications. The design of the
GMS Interconnect Series Product Information
GMS Interconnect Series Product Information Microwave Products Product Features: Frequency range: DC up to 23 GHz, Force to engage/disengage: 10 ounces min./2.5 pounds max., Male connectors have full self-centering
OSMP Microminiature Push-On Coaxial Connectors
Introduction Features Intermateable with Gilbert GPO Series Enhanced performance features Simplified ssembly etween Series dapters For OSMP etween Series dapters, see Page 438. OSMP microminiature push-on
SMP. Description. Compatibility. Content. Interface dimensions (mm/inches) SMP female. Interface dimensions conformable to the following standards:
Description Compatibility HUBER+SUHNER Astrolab connectors provide a robust, proven and fully compatible plug-in solution for applications up to 40 GHz. HUBER+SUHNER Astrolab connectors have been MIL-SPEC
Microwave Gilbert Push-on Interconnects
Microwave Gilbert Push-on Interconnects Table of Contents Table of Contents Connect to Precision and Performance 4 Custom Designs 5 Corning Optical Communications RF LLC 6 Reference Guide 8 GPO Products
Our Most Important Connection is with You. SECTION 3. Board-to-Board: MMBX / SMP-MAX R223 / R222M
SECTION 3 Board-to-Board: MMBX / R223 / R222M Contents MMBX Introduction... 3-4 Interface... 3-5 Characteristics... 3-6 Plugs... 3-7 PCB receptacles... 3-7 to 3-8 Adapters... 3-9 Demo board... 3-10 Panel
SSMP Interconnect Series
SSMP Interconnect Series INTRODUCTION Carlisle Interconnect Technologies (CarlisleIT) designed the SSMP connector product line to further improve package density of RF/Microwave systems. The SSMP interface
Series PC 3.5 precision subminiature connectors
Series PC 3.5 precision subminiature connectors Description Content HUBER+SUHNER PC 3.5 connectors are precision connectors for use in microwave applications up to 26.5 GHz. They are especially suitable
SMK Connectors. General Description. Contents (Click on any line to go to the indicated page) Test Data
SMK Connectors General Description These high-performance SMK (2.92 mm) connectors feature maximum VSWR for cable connectors of 1.15:1 from DC to 18 GHz, and 1.3:1 from 18 to 40 GHz. The maximum VSWR for
Applications & Features, Type SSMP When using blind mate connectors in an application, careful consideration has to be given to choosing the right con
SSMP Push-On Connectors & Adapters THE SSMP (Sub-Sub-Miniature-Push-On) is a 1.7 mm connector, using solid dielectric interface. The connector is 70% of the size of the SMP and therefore allows even higher
N Series Connectors Medium sized connector for high-voltage applications Suited for critical applications and environments Performance to 11 GHz (commercial) and 18 GHz (hi frequency) Intermateable with
SMA - 50 Ohm Connectors
142-0701-621 4 142-0701-626 4 142-0701-631 4 142-0701-636 4 142-0701-701 7 142-0701-706 7 142-1701-011 5 142-1701-016 5 142-1701-031 4 142-1701-036 4 142-1701-041 5 142-1701-046 5 142-1701-121 5 142-1701-126
SMA - 50 Ohm Connectors
Alphabetical Index 142-0701-201 4 142-0701-206 4 142-0701-231 4 142-0701-235* 4 142-0701-236 4 142-0701-301 5 142-0701-306 5 142-0701-335* 6 142-0701-421 5 142-0701-426 5 142-0701-491 5 142-0701-496 5
SMP / SMP-COM / SMP-MAX series R222
3 SMP / SMP-COM / SMP-MAX series R222 SMP-MAX INTRODUCTION BOARD TO BOARD SOLUTIONS The Best Systems Radiall s engineers work with your engineers allowing us to develop the best competitively priced misalignment
SMA Series. Specification. Description. Applications Civil & Military Telecommunication Instrumentation SMA SMA. Interface Mating Dimensions
Series Specification 50 ohm 0-18 GHZ connectors are adaptable to interconnection requirements of both systems and components. S-Conn offers a wide variety of cable connectors, receptacles, feed thrus,
Series SMPM-T. Description. Compatibility. Content. Interface dimensions (mm/inches) SMPM-T male (pin contact), smooth bore
Series Description The is the smallest threaded open source connector on the market. Its unique and innovative combination of a MIL- STD-348 SMPM female interface connector together with a retractable
BMA. 1. Applications & Features, Specifications & Interface Dimensions 2. Connectors of Type BMA 3. Adapters to BMA
CONTENT BMA INTRODUCTION to CONNECTORS & ADAPTERS Page 9 7/16 Page 15 N BMA Page 45 SBX SBY Page 61 Page 85 1. Applications & Features, Specifications & Interface Dimensions 2. Connectors of Type BMA 37
Type SMP Connectors Product Catalog
Type SMP Connectors Product Catalog Connectivity for SMP Connectors Table of Content Connectivity for Table of Contents PAGE Introduction....................................3-4 Specifications...................................5-8
Cannon 50 Ohm Connectors
SMB / SMC Cannon's SMB Snap-on and SMC Screw-on subminiature coaxial connectors have been specifically engineered for high performance and high reliability applications in both military and commercial
SERIES MCX 50 MICRO MINIATURE CONNECTORS
SERIES MCX 50 MICRO MINIATURE CONNECTORS DESCRIPTION CONTENT PAGE HUBER+SUHNER MCX micro miniature snap-on connectors offer you an excellent blend of size, weight, durability and performance for applications
MCX Connectors. Alphabetical Index. Johnson Components P.O. Box 1732 Waseca, MN Fax:
MCX Connectors Alphabetical Index 133-3701-201 3 133-3701-206 3 133-3701-211 3 133-3701-216 3 133-3701-221 3 133-3701-226 3 133-3701-231 4 133-3701-236 4 133-3701-301 5 133-3701-306 5 133-3701-311 5 133-3701-316
In-Series and Between-Series Adapters SMA
Adapters SMA In-Series and Between-Series Adapters SMA If your choice of SMA Adapter is not shown in this section, please refer to the Table below to determine other possible locations. Should you not
Mating Interfaces 1,63 (.064) 3,45 (.135) Ø3,71 (.146) MAX Ø6,61 (.260) MAX Ø3,71 (.146) MAX
SMB / SMC Cannon's SMB Snap-on and SMC Screw-on subminiature coaxial connectors have been specifically engineered for high performance and high reliability applications in both military and commercial
SECTION 12 SSMA/SSMB/SSMC R121/R203/R202 SIMPLIFICATION IS OUR INNOVATON. Visit for more information
SECTION 12 SSMA/SSMB/SSMC R121/R203/R202 SIMPLIFICATION IS OUR INNOVATON Visit www.radiall.com for more information Contents SSMA Introduction... 12-4 Characteristics... 12-4 Plugs... 12-5 Receptacles...
The Custom Interconnect Leader
SC Series.337.307.040.003.085.194 MIN FLARE TO MEET GAGE TEST.276 MIN.549.781 ELECTRICAL Nominal Impedance: Frequency Range: Voltage Rating: Dielectric Withstanding Voltage: Insulation Resistance: VSWR:
Board-to-Board connections
Board-to-Board connections MBX/MFBX/MMBX connectors Edition 2014/08 Innovative connections Your partner for system solutions The HUBER+SUHNER Group is a leading global supplier of components and systems
SMA. Precision 26.5GHz Connectors
SMA Precision 26.5GHz Connectors SMA Precision Connectors SMA subminiature connectors are 50 ohm precision connectors initially designed for performance through 18GHz, however the standard interface is
SECTION 1 IMP / UMP R107
1 SECTION 1 / UMP R107 Contents Introduction... 1-4 to 1-6 Characteristics...1-7 Board to board connectors...1-8 Receptacle packaging...1-9 Assembly instructions... 1-9 to 1-10 UMP Characteristics...1-11
Vertical Launch Connectors
Microwave Farm s Vertical Launch Connectors are specially designed for solderless vertical PCB launch on test & measurement board. These connectors have excellent electrical transition performance up to
Vertical Launch Connectors
Microwave Farm s are specially designed for solderless vertical PCB launch on test & measurement board. These connectors have excellent electrical transition performance up to 26.5 GHz, 40 GHz,50 GHz &
Prices, specifications, statement of warranty, and other terms and conditions are subject to change without notice by Lighthorse Technologies, Inc.
Section Index Connectors Specifications... 93 Flexible Cable... 95 Panel Mount... 99 Bulkhead... 100 PCB Mount... 101 In Series Adaptors... 103 Other Information Assembly Instructions... 176 Cable Assembly...
SEMS-4069-DPDT-K DATA SHEET
Transfer Latching Electro-Mechanical Relay Switch From DC to 40 GHz, 10 Watts with Indicators, Self Cut Off, 2.92mm The SEMS-4069-DPDT-K is a Transfer Electromechanical Relay Switch that operates over
2.92mm (SMK) Connectors
2.92mm (SMK) Connectors Catalog belfuse.com/cinch The Johnson 2.92mm Connector provides an excellent solution for demanding applications requiring high frequency transmission. Although similar to the SMA
SMA SERIES COAXIAL CONNECTORS
General Information Features Part Number Index Applications Coupling types and interface mating dimensions Semi-rigid conformable cable connectors Flexible cable connectors Connectors for modules Bulkhead
SEMS-4066-DPDT-SMA DATA SHEET
Transfer Latching Electro-Mechanical Relay Switch From DC to 18 GHz, 100 Watts with Indicators, TTL, Self Cut Off, SMA The SEMS-4066-DPDT-SMA is a Transfer Electromechanical Relay Switch that operates
The Custom Interconnect Leader
7-16 Series.354.276.843.811 ELECTRICAL Nominal Impedance: Frequency Range: Voltage Rating: Dielectric Withstanding Voltage: Insulation Resistance: VSWR: Intermodulation: 50 ohms DC to 7 GHz 2,700 volts
Corona 70,000 Ft. Permeability Risetime Degradation (Mated Pair) 2.0 max MH z
NDL Ultraminiature Triaxial Connectors Connector Specifications Interface Dimensions Ø.020 Ø.082 Ø.168 Ø.162 Electrical Specifications Dielectric Center contact to intermediate contact: 1000 Vrms min Withstanding
Catalog C-035 Rev. C
Catalog C-035 Rev. C P O S I T R O N I C I N D U S T R I E S Today, some customer applications have requirements for high bandwidth transfer between VMEbus cards. Requirements which even the most updated
TNC SERIES Miniature Coaxial Connectors
SERIES Miniature Coaxial Connectors FEATURES connectors, medium sized coaxial connectors with thread coupling, are designed for applications where extreme vibration is encountered.the increased rigidity
Product Performance Specification Mini Coaxial Connector
Product Performance Specification Mini Coaxial Connector 1. Scope 1.1 Content This specification covers the performance, tests and quality requirements for the Mini Coaxial connector and connector system.
SEMS-4052-SPDT-SMA DATA SHEET
SPDT Latching Electro-Mechanical Relay Switch From DC to 18 GHz, 100 Watts with Indicators, Self Cut Off, SMA The is an SPDT Electromechanical Relay Switch that operates over a wide frequency band from
Amphenol High Density HDB 3 /HSB 3 Connectors
Amphenol HDB 3 /HSB 3 Connectors TABLE OF CONTENTS Amphenol HDB 3 and HSB Connectors 3 Table of Contents..............................45 Introduction - Features, Options, Performance...............................
SMA Series - Crimp Plug and Jack
Plug Features: SMA connectors are semi-precision, subminiature devices that provide repeatable electrical performance. These devices offer broadband performance with low reflection. These properties, along
Product Specification. Mezza-pede SMT Connector Low Profile 1.0mm Pitch
Mezza-pede SMT Connector Low Profile 1.0mm Pitch Rev. 1 December 7, 2016 1.0 Scope This product specification applies to 1.0mm pitch Mezza-pede SMT Connectors, designed for the mating and unmating of a
SMA Connectors. RF Coax Connectors. Product Facts
SMA Connectors Product Facts Performance to 12.4 GHz and beyond Available in various base metal options, including stainless steel, brass and zinc diecast Uses industry standard crimp tools and processes
ASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES
ASSEMBLY, INSTALLATION, AND REMOVAL OF S AND MODULES FOR 40 GHz COAXIAL S AND MODULES Table of Contents SECTION 1 INSTALLATION AND REMOVAL SECTION 2 MODULE INSTALLATION AND REMOVAL SECTION 3 CROSS REFERENCE
End Launch Connector Series. Introduction Specifications Model Numbers Installation Procedures... 63
End Launch Connector Series Index End Launch Connectors (to 50 GHz).... Page Introduction... 60 Specifications... 61 Model Numbers... 62 Installation Procedures... 63 Test Data (Grounded Coplanar)... 64
INCHES (MILLIMETERS) CUSTOMER DRAWINGS AVAILABLE ON REQUEST
TNC Connectors Flexible Cable... 3 In-Series Adapters... 4 Specifications... 2 RF Adapter Kit Adapters... 6 N Connectors Panel Mount and In-Series Adapters... 10 Flexible Cable... 8 Specifications... 7
SMA Connectors Series
SMA Connectors Series Content Page Description.. 2 Interface Dimensions.. 2 Interface Dimensions in mm/inches.. 2 Characteristics. 3 Cable Connectors 4 PCB Connectors 11 Panel Receptacles.. 13 Adapter
Adapter 2.92 mm-f to 2.92 mm-m
Coaxial Adapter 2.92 mm-f to 2.92 mm-m 50Ω DC to 40 GHz The Big Deal Ultra-wideband, DC-40 GHz Flat response Low insertion loss, 0.09 db Excellent, 1.04:1 CASE STYLE: DJ1861 Product Overview Mini-Circuits
SEMS-4080-SP12T-SMA DATA SHEET
SP12T Latching Electro-Mechanical Relay Switch From DC to 12.4 GHz, 120 Watts with Self Cut Off, Auto Reset, Indicators, Diodes, SMA SEMS-4080-SP12T-SMA The SEMS-4080-SP12T-SMA is an SP12T Terminated Electromechanical
Amphenol. Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN.
Amphenol Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN. UHD FEATURES & BENEFITS 0.100 x 0.050 staggered grid - High density optimizes trace routing through the backplane
SPECIFICATION AND PERFORMANCE CHARACTERISTICS OF DVI MALE AND FEMALE CONNECTOR SERIES
SPECIFICATION AND PERFORMANCE CHARACTERISTICS OF DVI MALE AND FEMALE CONNECTOR SERIES CIRCUIT ASSEMBLY CORP. 18 THOMAS STREET, IRVINE, CA 92618-2777 Page No. 1 CONTENTS CLAUSE PAGE 1.0 SCOPE.. 3 2.0 APPLICABLE
Micro D Series Filtered Connectors
Micro D Series Filtered Connectors For designs that require even smaller connector packages, API s Spectrum Control brand has designed a line of filtered Micro D-Subminiature connectors. This line of connectors
APPLICATION NOTES. Connectors for LED Lighting Applications. Co-Planar Board Mating FIG. 1
APPLICATION NOTES Connectors for LED Lighting Applications Mill-Max addresses the connector needs of the growing field of LED lighting applications with products such as receptacles and sockets suitable
SUBMINIATURE SERIES R 591. SUBMINIATURE SPnT up to 40 GHz. Our Most Important Connection is with You. SMA SMA 2.9 QMA
PART Number Selection RF Connectors: 3: SMA up to 6 GHz 7: SMA up to 26.5 GHz 8: SMA 2.9 up to 40 GHz (6) E: QMA up to 6 GHz (5) Type: 0: Normally open 2: Latching, global reset 6: Latching, separated
Series 3402 lightning EMP protectors Gas discharge tube (GDT) technology up to 2.5 GHz
lightning EMP protectors Gas discharge tube (GDT) technology up to 2.5 GHz Description HUBER+SUHNER gas discharge tube protectors make the best of the traditional spark gap protection principle for general
SSMC Connectors. Microminiature, screw-on mating High performance to 12.4 GHz. General Description
SSMC Connectors Microminiature, screw-on mating High performance to 12.4 GHz General Description Delta SSMC connectors are microminiature, 50Ω impedance connectors with 6-40 threaded coupling. SSMC connectors
R Actuator Terminals: 0: Solder pins 5: D-Sub connector
Terminated and non Terminated up to 40 GHz SMA - SMA2.9 - QMA - DIN 1.6 / 5.6 COAXIAL RADIALL R573 & R574 multithrow coaxial switches are offered in many configurations (over 40,000 possible possible combinations)
RF & MW Connectors RF & MW Adapters RF Connectivity. RF & MW Connectors
RF & MW Connectors - 2.4 mm Connectors - 2.92 mm(k) Connectors - Hermetic Seal (0.02 Glass Bead) - SMP Connectors - BMA Connectors - High Performance End Lanch Connectors - High Performance SMA Connectors
HIGH POWER HOT PLUGGABLE INTERCONNECTION SYSTEM. US Patent # 6,299,492 B1 2. POWER, RIGHT ANGLE EARLY 3. POWER, RIGHT ANGLE EARLY
HIGH POWER HOT PLUGGABLE INTERCONNECTION SYSTEM US Patent # 6,299,492 B1 The HOTMATE board to board interconnection system provides a unique method of transferring hot pluggable power requirements within
Southwest Microwave, Inc. Tempe, Arizona, USA +1 (480) mm (V) Series DC to 67.
The Performance Leader in Microwave Connectors 1.85 mm (V) Series DC to 67.0 GHz Connectors Supplement to Catalog Southwest Microwave, Inc. Tempe, Arizona, USA +1 (480) 78-0201 infompd@southwestmicrowave.com
11525A 11524A
8 Typical Configuration 11900A 11901A 11904A 8059A 1250-1159 1250-1748 85058-60007 11900C 11901C 11901D 11904C 11904D 8059C 1250-1462 85058-60009 1190A 1250-166 1250-174 11525A 11524A 11852B 11852B Option
Amphenol. Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN.
Amphenol Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN. FEATURES & BENEFITS Available in 2 through 4 rows - Offers maximum design flexibility Tested and qualified to
N Connectors Specifications Flexible Cable Semi-Rigid Cable Panel Mount Bulkhead In Series Adaptors...
Section Index Connectors Specifications... 137 Flexible Cable... 139 Semi-Rigid Cable... 145 Panel Mount... 147 Bulkhead... 148 In Series Adaptors... 149 Other Information Assembly Instructions... 176
CompactPCI PowerConnector
CompactPCI PowerConnector Table of Contents 1 Introduction............................................................. 2 Product Features......................................................... 3 Performance
SYSTEMS ELECTRONICS GROUP
SYSTEMS ELECTRONICS GROUP SYSTEMS M4500 MACHINE COMPONENTS RSV34-MS1 RESOLVER with MS CONNECTOR Brushless, Single-turn Resolver Rated to 3,000 RPM Rotary Position Transducer for M4500, M4020, M4040, M4041,
SECTION 7 SMA/SMA-COM/BMA R125/R124/R128 SIMPLIFICATION IS OUR INNOVATON. Visit for more information
SECTION 7 /COM/BMA R125/R124/R128 SIMPLIFICATION IS OUR INNOVATON Visit www.radiall.com for more information Contents BMA Introduction... 74 Characteristics... 75 Plugs... 76 Jacks... 77 to 78 Receptacles...78
MULTIGIG RT 2, RT 2-R, and RT 3 Signal Connectors
MULTIGIG RT 2, RT 2-R, and RT 3 Signal Connectors Application Specification 114-163004 21 MAR 18 Rev A Abstract This specification covers the requirements for application of MULTIGIG RT 2, RT 2-R, and
Hybrid Couplers 3dB, 90º Type PC2025A2100AT00
GENERAL DESCRIPTION The PC2025A2100AT00 is a RoHS compliant low profile wideband 3dB hybrid coupler which can support mobile applications, including PCS and DCS applications. The power coupler series of
Adapter 3.5mm-F to 3.5mm-M
Coaxial Adapter 3.5mm-F to 3.5mm-M 50Ω DC to 34 GHz Maximum Ratings Operating Temperature -55 C to 100 C Storage Temperature -55 C to 100 C Permanent damage may occur if any of these limits are exceeded.
PC/104, PC/104 Plus Specification
PC/104, PC/104 Plus Specification Industry Standard bus connection systems, typically used on embedded PC applications. Designed for oard-to-oard stacking with a common bus. PC/104 Connectors mm pitch
Labs. Introduction. Application Notes
Introduction Application Notes Florida RF has provided an extensive collection of Application Notes in this section to help designers select and specify cable assemblies. These Application Notes cover
Description. Specifications and Ordering Information 9200, 74712, Seismoprobe Velocity Transducer System
R Specifications and Ordering Information 9200, 74712, 47633 Seismoprobe Velocity Transducer System Description Bently Nevada Seismoprobe Velocity Transducer systems are designed to measure absolute (relative
RAMSES SERIES R 57. SPnT Terminated & non Terminated up to 40 GHz. Our Most Important Connection is with You.
SPnT Terminated & non Terminated up to 40 GHz SMA SMA 2.9 QMA - DIN 1.6 / 5.6 Radiall's R573 & R574 multithrow coaxial switches are offered in many configurations (over 40,000 possible combinations) including
Series 3400 lightning EMP protectors Quarter-wave stub technology
Series 3400 lightning EMP protectors Quarter-wave stub technology Description HUBER+SUHNER quarter-wave lightning EMP protectors offer the best lightning protection available in the market, as they form
PRODUCT SPECIFCATION GS MINI-SAS HD External Cable to Board Connector System. 1 of 14 F. Roger Cheng TYPE NUMBER
1 of 14 F TABLE OF CONTENTS 1.0 OBJECTIVE... 3 2.0 SCOPE... 3 3.0 APPLICABLE DOCUMENTS... 3 3.1 FCI SPECIFICATIONS... 3 3.2 OTHER STANDARDS AND SPECIFICATIONS... 3 3.3 FCI PRODUCT QUALIFICATION TEST REPORTS...
ndl-q & ndl-t SerieS CONNECTORS
ndl-q & ndl-t SerieS CONNECTORS TRIAXIAL CONNECTORS Interface Dimensions Mechanical & Environmental Specifications (Ø.168) Temperature Rating Corrosion -65 C to + 165 C MIL-STD-202 Method 101, Test Condition
PRODUCT SPECIFICATION CUSTOM CONFIGURABLE MODULAR POWER DOCK CONNECTOR SYSTEM
1.0 SCOPE This Product Specification covers the custom configurable modular printed circuit board (PCB) Dock Connector System with gold plating. 2.0 PRODUCT DESCRIPTION 2.1 PRODUCT NAME AND SERIES NUMBER(S)
Extensive range of QPL standard and custom audio connectors trusted by our fighting forces for 35 years. MIL-DTL audio connectors
Extensive range of QPL standard and custom audio connectors trusted by our fighting forces for 35 years MIL-DTL-55116 audio connectors MIL-DTL-55116 solutions Eaton s MIL--DTL--55116 connectors and cable
PERFORMANCE SPECIFICATION ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY, (BETWEEN SERIES SMA TO SERIES TNC), CLASS 2, STRAIGHT PLUG
INCH POUND MIL-PRF-55339/48B w/amendment 1 15 June 2017 SUPERSEDING MIL-PRF-55339/48B 30 April 2015 PERFORMANCE SPECIFICATION ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY, (BETWEEN SERIES SMA TO SERIES
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. 0.80mm (.031") Pitch Small Form-Factor Pluggable (SFP) Receptacle 74441
High Performance SMA Connector Data Sheet
: PSF-S00-000 (SMA 4-Hole Panel Mount Jack) Technical Data Max. Frequency 50 Ω 26.5 GHz Min. 5 GΩ Material Surface Plating Material Data Center Contact Body BeCu Brass Insulator PTFE Captivation Low Loss
AMPMODU* MOD I Interconnection System
Product Specification AMPMODU* MOD I Interconnection System 03 JUN 2013 Rev E All Paragraphs Revised 1. SCOPE This specification covers performance and test requirements for the AMPMODU MOD I Interconnection
PLATINUM SERIES R PART NUMBER SELECTION. High performance SPDT up to 40 GHz. Our Most Important Connection is with You. SMA - SMA 2.
PART NUMBER SELECTION Frequency Range: 3: SMA up to 6 GHz 4: SMA up to 20 GHz F: SMA up to 26.5 GHz 8: SMA 2.9 up to 40 GHz Type: 3: Latching (1) 4: Latching + I.C. (1) 5: Latching + S.C.O. (1) 6: Latching
HD DIGITAL VIDEO A/B SWITCH INSTALLATION MANUAL
DVS772HD HD DIGITAL VIDEO A/B SWITCH INSTALLATION MANUAL IB6445-01 DESCRIPTION The DVS772HD high definition DIGITAL VIDEO SWITCH is a high isolation high frequency relay used to switch digital signals
DETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-553/3F w/amendment 8 July 7 SUPERSEDING MIL-DTL-553/3F May 6 DETAIL SPECIFICATION SHEET CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, STRAIGHT-THRU, 3 thru CONTACT POSITIONS,
Modular FLATPAQ. provided, and Elcon will provide samples, typically within one week.
Modular FLATPAQ Modular FLATPAQ connectors provide custom solutions to hot pluggable AC and DC power needs in a board-to-board format. By using off-the-shelf modular components, power and signal modules,
IDC for 50mil(1.27mm) Falt Cable with One-touch Locking Ejector System 50mil(1.27mm) PITCH 2 PIECE CONNECTOR 8822E SERIES C-41
IDC for mil(1.27mm) Falt Cable with One-touch Locking Ejector System mil(1.27mm) PITCH 2 PIECE CONNECTOR 8822E SERIES C-41 8822E/8830E/8831E SERIES 1.27mm PITCH 2 PIECE CONNECTOR / IDC FOR 1.27mm (mil)
IEEE 1394 Connector. Range Overview IP Receptacle to Overmolded with Cable In Line. Accessories. IEEE 1394 Connector I Range Overview
Amphenol TW Innovation in Waterproof Solution CATAOGUE http://www.amphenolltw.com IEEE 1394 Connector I Range Overview IEEE 1394 Connector IP 67. 68 Unmated or Mated 9 Range Overview to In ine Accessories
decoupled connectors RF Coax Connectors Product Facts
Decoupled Connectors Product Facts Built-in chip capacitors filter high-frequency noise to panel ground PC board mounting with vertical and standard or low-profile right-angle configurations Cable mount
Elma Bustronic CompactPCI Reference Sheet
Elma Bustronic CompactPCI Reference Sheet Rev. 4 5.10.10 The cpci reference sheet provides relevant reference material for the CompactPCI product line. The information provided may change at anytime. Elma
2.6 GHz capable, 10 W carrying power (at 2.6 GHz), 50Ω/75Ω impedance and 1 Form C relays
.6 GHz capable, W carrying power (at.6 GHz), 5Ω/75Ω impedance and Form C relays RE RELAYS (ARE)..44..44 mm inch FEATURES Excellent high frequency characteristics (to.6ghz) Surface-mount type also available
FISCHER MINIMAX TM SERIES
TECHNICAL SPECIFICATIONS FISCHER TM SERIES Fischer Connectors SA All rights reserved Web version 1.0-03.2016 Changes without prior notice FISCHER TM SERIES KEY FEATURES The Fischer MiniMax Series increases
The Series 79 Micro-Crimp Connector
The Series 79 Micro-Crimp Connector Covered in This Session 1. The architecture of the MicroCrimp connector, including supported contacts, layouts, and connector styles. 2. The purpose for blind-mate applications.
Labs. Introduction. Application Notes
Introduction Application Notes Florida RF has provided an extensive collection of Application Notes in this section to help designers select and specify cable assemblies. These Application Notes cover
PCB Single Row Connectors
PB Single Row onnectors Right ngle Mount Thru Hole PB onnectors with Mounting Ears - How to Order Right ngle Thru Hole PB Nano onnectors with Mounting Ears feature gold alloy TwistPin contacts. These nanomimiature