comm IPC-6AUR (Membrane) Version 2.1

Size: px

Start display at page:

Download "comm IPC-6AUR (Membrane) Version 2.1"

Daniel Dorsey
6 years ago
Views:

1 IPC-6AUR (Membrane) Version 2.1

2 Thank you for purchasing our COMM Integrated Control Switches! COMM Integrated Control Switches (IPC Series) - Designed to control your Audiovisual Equipment in the most simplified ways via RS-232 ands; reasonably priced and works with most projectors and plasma displays. One Touch Selection with LED Back-Lit Indications on the selectors buttons, you can easily control your displays with its various selector buttons (e.g. select the different input source, volume and/or screen controls etc) Built-In Signal Amplifiers of 250MHz / 350MHz bandwidths to minimise signal-loss worries. Widely used in Classrooms, Auditoriums, Lecture Theatres, Conference Rooms etc. MAIN FEATURES Display Controller for your Projector, Plasma (Power ON/OFF, input source selections, volume control) via RS232 Commands One Touch Selection with LED Back-Lit Indications INPUTS : 2 VGA with 2 USB Type B and 2 mini audio, 1 Composite Video, 1 USB Type A, 1 mini audio Microphone. OUTPUTS: 2 VGA, 1 Video (Composite), 2 USB with repeater, 1 Audio Built-In Signal Amplifier of 250MHz Screen/ Audio Volume (Toggle button UP/ DOWN) Volume Control Knob for MIC Inputs sound adjustments A NEW FEATURES STANDBY mode - MIC Volume Control usable. PC1 with Audio : PC Monitor is usable even when projector is OFF. (need turn ON WizarSwitch) RS232 out capability 2 VGA Input with USB selection to interactive whiteboard or projector. Support HD1080i/1080p Internal USB connector Direct connection to interactive whiteboard and PC

3 TABLE OF CONTENTS 1 Function Keys Internal Board Connections Connections RGB Connections Power Connections Audio and Video Connections RS-232 Connections USB Connection Screen Connection Programming (Optional) Specifications Standard Package Troubleshooting. 10/11 7 Notes Connections Diagram 13 B

4 1. Function Keys Model No: IPC-6AUR Projector ON 2. Projector OFF 3. Picture Blank Toggle Button 4. Sync ON/OFF 5. Volume/ Screen Control DOWN 6. Screen/ Audio Toggle 7. Volume/ Screen Control UP 8. PC 1 / PC 2 Signal with USB In Selector 9. HDMI/ Video IN Selector 10. Wireless Selector (depending on the Projector whether there s WIRELESS presentation functions) 11. USB Type A 12. USB Type B for PC1 or PC2 13. MIC Volume Control Knob 14. MIC In 3.5mm 15. Video Audio Right Input 16. Video Audio Left Input 17. Video IN Selector 18. PC 1 Signal Input 19. PC 1 Audio Input 20. PC 2 Signal Input 21. PC 2 Audio Input 22. Monitor Signal Out 1

2. Internal Board Connections 1 2 3 4 5 6 9 8 7 1. RS232 Connection 2. Dip-Switch 3. Programming Connection 4. Power Connection 5.

5 2. Internal Board Connections RS232 Connection 2. Dip-Switch 3. Programming Connection 4. Power Connection 5. Internal USB connection 6. Audio Connection 7. Screen control (Optional CRM-1- contact relay mod ule) 8. Video Connection 9. RGB Connection 2

3.1. RGB Connections 1 2 3 4 5 6 7 8 9 1. Red 2. Red Ground 3. Green 4.

Vertical (V) 9. H/V Ground (GND) 1 2 3 3 1.

6 3.1. RGB Connections Red 2. Red Ground 3. Green 4. Green Ground 3.2. Power Connections 5. Blue 6. Blue Ground 7. Horizontal (H) 8. Vertical (V) 9. H/V Ground (GND) Connect the Power Adapter (Supplied) to the power connector, as shown. OR 2. Positive + on Power Adapter 3. Negative - on Power Adapter

3.3. Audio & Video Connections 1 2 1. Video- Signal (VID) 2.

Mini-Jack Female connection for audio out 3 3.4.

7 3.3. Audio & Video Connections Video- Signal (VID) 2. Video-Ground (GND) 3. Mini-Jack Female connection for audio out RS232 Connections Ground (GND) RS232 to Projector Ground (GND) 2. Transmit (TX) RS232 to Projector Received (RXD) 4

3.5. USB Connections 1 2 3 4 5 6 1 2 3 4 1. GND (Black) 2. D - (Green) 3. D + (White) 4. VBUS(RED) 5.

8 3.5. USB Connections GND (Black) 2. D - (Green) 3. D + (White) 4. VBUS(RED) 5. USB Type A for USB Pen Drive or any USB input ( Connection to the PC USB in from the screw connector) 6. USB white connector to Interactive Whiteboard or Projector (Connection from the front panel USB) 5

9 3.6. Screen Connections 1 1. Connection to CRM 1 (Contact relay module) Connection from CRM 1 to motorised screen 6

Parallel Port To connect to PC / Laptop / Notebook with Parallel Port) b.

10 3.7. Optional Programming Package IPC-6AUR 1 a 2 c a b d 3 Consists of: 1) 6 Pin Connector at IPC-6AUR CPU Board 2) Software Programmer Burner 3) Programming Cable Note: Programming Package Excludes IPC switches a. Parallel Port To connect to PC / Laptop / Notebook with Parallel Port) b. Programming Port To connect to your IPC-6AU Control Switch c. Beige/Black connector to IPC-6AU d. Beige / White Cable connector to Programming Burner 7

11 4. Specifications MODEL : IPC-6AUR A) Input PC1 / PC2 Signal - VGA (D-Sub 15-Pin Female) PC1 / PC2 Audio - 3.5mm Mini Jack PC1 / PC2 USB - USB Type B (Selection together with VGA ) Video Signal - Composite Video (RCA) Audio Signal - Stereo / Composite Audio (RCA) Microphone IN - 3.5mm Mini Jack USB - USB TYPE A B) Output PC Signal PC Signal Video Signal Audio Signal Microphone USB X 2 - VGA Bandwidth of 250MHz - Monitor OUT, VGA Bandwidth of 250MHz - 1 USB to interactive board or projector, 1 USB to PC C) Communication Control Serial Control Port - RS232 Baud Rate , 19200, 38400, Data / Stop Bits - 8 bits / 1 stop bit, No parity - Programmable to 2 stop bit and EVEN parity D) Selector Switch (with LED Back-Lit Indications) Projector ON/OFF Blank (Toggle Button) Auto Sync (Toggle Button) SCREEN/ AUDIO VOLUME (UP / DOWN) (for Screen or PC & Video Audio) VGA IN Selector (Switch between PC1 with USB 1 or PC2 with USB 2 Input) HDMI/ VIDEO IN Selector (Composite input) WIRELESS IN Selector (depend of device which got Wireless presentation) VOLUME Control Knob (For MIC Inputs) E) Power Supply 12V DC 500mA Power Adapter F) Product Dimension & Weight Unit Dimension (W x H x D) : 14.5cm x 8.6cm x 5.5cm (5.7 x 3.4 x 2.2 ) Unit Weight : 0.25 kg (0.55 lbs) Box Dimension (W x H x D) : 27.7cm x 10cm x 7cm (10.9 x 4 x 2.6 ) Weight (Incl. Power Adapter) : 0.64 kg (1.41 lbs) 8 All products information and specifications are subject to changes without prior notice.

12 5. Standard Package Consists of the following: (1) Integrated WizarSwitch Unit Membrane Silkscreen (2) 12V DC 500mA Power Adapter (3) User Guide 9

13 6. Troubleshooting Problem I have connected the power adapter to the control switch but there are still no LED lights indications on the control switch. Solution 1. Check the positive & negative on the power adapter is soldered at the right connection. (See page 3) 2. Verify the voltage of the power adapter is in accordance to your country current power voltage input I have soldered the RS232 connections to the projector/plasma control port, but still unable to control the switch accordingly. 1. Make sure the RS232 GND and TX soldering connections are soldered on the right pin on the controller PCB Board. (See page 4) 2. Check the RS232 connection settings on the projector/plasma for the correct baud rates or Pin Configurations. There may be a need to change the default baud rate setting on your projector/ plasma, if required. (See page 4) 3. Reprogramming is required. (Please refer to the programming manual) 4. Check RS232 connector is that short circuit I have connector the USB cable to IPC-4AU,but my Interactive WhiteBoard still unable to work. 1. Make sure you have connect USB internal connector to your Interactive WhiteBoard 2. Check the Internal USB cable I that connect at the right PIN. 3. Check your PC/Laptop USB driver. Flickering images projected out after the connections to the control switch. One of the colors projected out is missing, or the colors are washed off. 1. Make sure the RGB Soldering connections on the Horizontal and Vertical is soldered correctly. (See page 3) 1. Make sure the RGB Soldering connections on the Red, Green and Blue is soldered correctly. (See page 3) If all the LED are lighted up on the control switch. 1. Reprogramming is required. (Please refer to the programming manual) If these troubleshooting tips do not solve your problems, please us at support@product.com or call us at (+65)

14 6. Troubleshooting Problem I have connected the USB on the front panel but cannot detect it on the interactive board or projector Solution 1. Check the connection on the USB to the interactive board or projector. (See page 3.5) 2. Check whether the USB is detected on the PC or laptop. 3. If USB cable from the WizarSwitch to the interactive board or projector is more than 6 metres, please add a USB repeater. I have connected the USB pendrive or any other USB devices on the USB type A on the side WizarSwitch, but the PC or laptop cannot detect the USB devices. 1. Check the connection on the USB screw type to the PC or laptop (See page 3.5) 2. Check whether the USB is detected on the PC or laptop. 3. If USB cable from WizarSwitch to the PC or laptop is more than 6 metres, please add a USB repeater. I have connected my PC or laptop VGA and USB on the front panel but the image is projected by USB is not detected. 1. Please check whether the VGA and USB input is at the same port. (VGA and USB input must be at connected to VGA 1 and USB 1 or VGA2 and USB 2) 2. Please refer to the USB connection and the USB cables length If these troubleshooting tips do not solve your problems, please us at support@product.com or call us at (+65)

15 7. Notes 1. Please remember to switch OFF IPC switcher s POWER ADAPTER during the installation or soldering process. 12

8. Connection Diagram HDMI Cable VGA Cable

PENDRIVE / CAMERA (VIA USB DIRECT TO PC) USB IN

VGA 1 Signal with AUDIO and USB IN VGA 2 Signal

PROJECTOR Audio OUT (Left/Right) Video IN, Audio IN

16 8. Connection Diagram HDMI Cable VGA Cable PROJECTOR RCA Cable RS232 cable (TX and GND) PENDRIVE / CAMERA (VIA USB DIRECT TO PC) USB IN Power Supply POWER ADAPTER COMM IPC-6AU WIZARSWITCH VGA 1 Signal with AUDIO and USB IN VGA 2 Signal with AUDIO and USB IN USB Cable INTERACTIVE BOARD/ PROJECTOR Audio OUT (Left/Right) Video IN, Audio IN (L/R) MULTIMEDIA SPEAKER MIC IN MICROPHONE Monitor OUT (VGA OUT) MONITOR 13

COMM PRODUCTS TECHNOLOGIES PTE LTD For additional information, please contact us at: info@product.com Customer Care HelpDesk: support@product.

17 COMM PRODUCTS TECHNOLOGIES PTE LTD For additional information, please contact us at: Customer Care HelpDesk: All products information and specifications are subject to changes without prior notice. Last updated as at 29-October Comm Products Technologies Pte Ltd 2013

How to use A/V Podium Equipment at Niagara College

How to use A/V Podium Equipment at Niagara College Table of Contents Which Podium are you using?... 3 Meeting Room / Small Classroom... 7 What each control does... 8 External / Laptop Connections... 9