Trendmaster* Galvanic Isolator
|
|
- Shon King
- 6 years ago
- Views:
Transcription
1 Trendmaster* Galvanic Isolator Product Datasheet Bently Nevada* Asset Condition Monitoring Description The Trendmaster Galvanic Isolator enables the Trendmaster system to connect to intrinsically safe transducer installations without the need for safety barriers or the need to specify, install and maintain a high integrity IS earth. The Trendmaster Galvanic Isolator provides an interface between Trendmaster scanning hardware, and all associated Programmable Transducer Interface Modules (ProTIMS) located in a hazardous area. The Trendmaster Galvanic Isolator is powered from an external power supply which enables several Galvanic Isolators to be connected in parallel to one TIM line from DSM or SPA. Each Galvanic Isolator can interface and power up to at most 32 ProTIM with maximum cable length (3500 ft.). Page 1 of 7
2 Specifications All values are specified over the full operating temperature range unless stated otherwise. All voltages are specified with respect to COM. References to protims relate to protim-r and protim-c. References to ProTIM relate to the Trendmaster 2000 Programmable Transducer Interface Modules. External Power Input. Nominal Input Voltage: Maximum Current Draw: +24 V ± 5 % 100 ma Power Dissipation. Including power supply to 32 ProTIMs and associated transducers V, Typical Environmental Specification Operating Temperature range: Storage Temperature Range: Relative humidity: -20 to +65 C -40 to +85 C 100 % condensing, non-submerged, power on when installed in a weatherproof housing. Compliance and Certifications Electromagnetic Compatibility Standards: European Community Directives: EN Immunity for Industrial Environments EN Emissions for Industrial Environments EMC Directive 2014/30/EU Hazardous Area Approvals For a detailed listing of country and product specific approvals, refer to the Approvals Quick Reference Guide (document 108M1756) located at the following website: North America: Ex na [ia] IIC T4 Gc Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx na [ia] IIC T4 Gc Class I, Division 2, Groups A, B, C, D 20 C < Ta < +65 C Install per Control Drawing in a safe area. Division 2/ Zone 2 area. ATEX/IECEx: II (1) GD II 3(1) GD [Ex ia Ga] IIC [Ex ia Da] IIIC Ex na [ia Ga] IIC T4 Gc Ex tc [ia Da] IIIC T140 C Dc IP5x 20 C < Ta < +65 C Must be housed in NEMA type 4 or IP 54 weatherproof housing when installed in a Zone 2 Area meg ohm static dissipation resistor fitted within the Galvanic Isolator per EN Page 2 of 7
3 Certification Parameters POWER SIG+/SIG- COMBINED Uo (V) ±14.34 ±9.56 ±23.9 Io (ma) Po (mw) IIA IIB IIC IIA IIB IIC IIA IIB IIC Co in(µf) Lo/Ro (µh/ω) Physical Weight: Dimensions: Mounting: AC Performance Accuracy: Noise Floor: Bandwidth ac Phase: 0.25 Kg (0.55 lb) 94 mm x 150 mm x 45 mm (3.7 x 5.9 x 1.77 ) DIN Rail ± 1 % ± 0.5% Trendmaster full-scale 1 % dc to 10 khz Hz absolute Dynamic Scanning Module (DSM): Maximum of Four Galvanic Isolators connected to each TIM line from DSM or SPA. Outputs Hazardous area connection to the following Intrinsically Safe Transducer Interface Module types: protim - C protim - R Number of TIMs A maximum number of 32 protims are allowed to connect to one Galvanic isolator. ± 600 Hz unit-to-unit skew 1 1 For phase-critical measurements all measured signals should be connected through isolators to preserve phase. DC Performance Accuracy: Inputs ± 1 % or 15 mv whichever is the greater Safe area connection to the following Trendmaster Host scanning hardware. Page 3 of 7
4 Ordering Information For the detailed listing of country and product specific approvals, refer to the Approvals Quick Reference Guide, document 108M1756, at Trendmaster Galvanic Isolator Product Number Including connectors required for installation. Accessories Power Supply Weatherproof Housing TIM Line Connector from SPA. TIM line Connector to TIMs Power Supply Connector Page 4 of 7
5 Graphs and Figures Reference drawing (162521) for the maximum number of 32 ProTIMs allowed to connect to one Galvanic Isolator. Figure 1: System Installation Page 5 of 7
6 Figure 2: Grounding * Each SPA channel must connect to instrument ground at one Galvanic Isolator. * Each Galvanic Isolator s IS shield must connect to IS ground. * Refer to BN Documents and for more information. Connector Pin Assignments Pin # Power Supply (SAFE) TIM Line Connected to DSM or SPA (SAFE) TIM Line Connected to protims (HAZ) 1 +24V SHIELD TIM SIG+ (GRN) 2 0V SPA PWR (RED) TIM SIG- (WHT) 3 GND SPA COM (BLK) TIM COM (BLK) 4 GND SPA SIG- (WHT) TIM PWR (RED) 5 N/A SPA SIG+ (GRN) SHIELD Page 6 of 7
7 Dimensional Drawings NOTE: Dimensions are in millimeters (inches) Figure 3: Trendmaster Galvanic Isolator 2017 Bently Nevada, LLC All rights reserved. * Denotes a trademark of Bently Nevada, LLC, a wholly owned subsidiary of General Electric Company. All product and company names are trademarks of their respective holders. Use of the trademarks does not imply any affiliation with or endorsement by the respective owners. The information contained in this document is subject to change without prior notice. Printed in USA. Uncontrolled when transmitted electronically Bently Parkway South, Minden, Nevada USA Phone: Page 7 of 7
3500 Internal Barriers Product Datasheet Bently Nevada* Asset Condition Monitoring
GE Measurement & Control 3500 Internal Barriers Product Datasheet Bently Nevada* Asset Condition Monitoring Description 3500 Internal Barriers are intrinsically safe interfaces that provide explosion protection
More information3500/77M Recip Cylinder Pressure Monitor
3500/77M Recip Cylinder Pressure Monitor Product Datasheet Bently Nevada* Asset Condition Monitoring Description The 3500/77M Recip Cylinder Pressure Monitor is a 4-channel monitor that accepts input from
More information3500/25 Enhanced Keyphasor*Module
3500/25 Enhanced Keyphasor*Module Product Datasheet Bently Nevada* Asset Condition Monitoring Description The 3500/25 Enhanced Keyphasor Module is a half-height, two-channel module used to provide Keyphasor
More informationVelomitor* CT Velocity Transducer
190501 Velomitor* CT Velocity Transducer Product Datasheet Bently Nevada* Asset Condition Monitoring Description The Velomitor CT Velocity Transducer is a low-frequency version of our standard Velomitor
More informationand High Temperature Velomitor * System
330750 and 330752 High Temperature Velomitor * System Product Datasheet Bently Nevada* Asset Condition Monitoring Description The standard 330500 Velomitor* Piezo-velocity Sensor has a limited temperature
More information1701/05 FieldMonitor* Terminal Base Bently Nevada* Asset Condition Monitoring
70/05 FieldMonitor* Terminal Base Bently Nevada* Asset Condition Monitoring Description The 70/05 Terminal Base is the mounting platform for the FieldMonitor* system for applications where transducers
More information3500/22M Transient Data Interface Module
3500/22M Transient Data Interface Module Product Datasheet Bently Nevada* Asset Condition Monitoring Description The 3500/22M Transient Data Interface (TDI) is the interface between the 3500 monitoring
More informationDescription. System Event List Alarm Event List All module and channel data Current alarm data (quick view) Nine custom display options.
3500/94M VGA Display Product Datasheet Bently Nevada* Asset Condition Monitoring The 3500/94M VGA Display uses a standard color VGA monitor with Touch Screen technology to display 3500 data. This product
More information9200, Seismoprobe* Velocity Transducers
9200, 74712 Seismoprobe* Velocity Transducers Product Datasheet Bently Nevada* Asset Condition Monitoring Description Bently Nevada* Seismoprobe Velocity Transducer Systems are designed to measure absolute
More information3500/32M 4-Channel Relay Module
3500/32M 4-Channel Relay Module Bently Nevada* Asset Condition Monitoring Description The 4-Channel Relay Module is a full-height module that provides four relay outputs. Any number of 4-Channel Relay
More informationCase Expansion Transducer Systems
Case Expansion Transducer Systems Product Datasheet Bently Nevada* Asset Condition Monitoring Description Thermal Case Growth Measurements in Large Turbines An important position measurement in Turbine
More information3500/65 16-Channel Temperature Monitor
3500/65 16-Channel Temperature Monitor Bently Nevada* Asset Condition Monitoring Description The 3500/65 monitor provides 16 channels of temperature monitoring and accepts both resistance temperature detector
More informationand High Temperature Velomitor * System
330750 and 330752 High Temperature Velomitor * System Bently Nevada* Asset Condition Monitoring Description The standard 330500 Velomitor* Piezo-velocity Sensor has a limited temperature range it can be
More information3500/33 16-Channel Relay Module Bently Nevada* Asset Condition Monitoring
3500/33 16-Channel Relay Module Bently Nevada* Asset Condition Monitoring Description The 16-Channel Relay Module is a full-height module that provides 16 relay outputs. Any number of 16-Channel Relay
More information2300 Vibration Monitors
2300 Vibration Monitors Product Datasheet Bently Nevada* Asset Condition Monitoring Description The 2300 Vibration Monitors provide cost-effective continuous vibration monitoring and protection capabilities
More information3500/15 Power Supply Bently Nevada* Asset Condition Monitoring
3500/15 Power Supply Bently Nevada* Asset Condition Monitoring Description The 3500 Power Supplies are half-height modules and must be installed in the specially designed slots on the left side of the
More information2300 Vibration Monitors
2300 Vibration Monitors Product Datasheet Bently Nevada* Asset Condition Monitoring Description The 2300 Vibration Monitors provide cost-effective continuous vibration monitoring and protection capabilities
More information200150, & Accelerometers Bently Nevada* Asset Condition Monitoring
200150, 200155 & 200157 Accelerometers Bently Nevada* Asset Condition Monitoring Description The 20015x Accelerometers are general purpose, wide frequency, case-mounted seismic transducers designed for
More information3500/22M Transient Data Interface Bently Nevada* Asset Condition Monitoring
3500/22M Transient Data Interface Bently Nevada* Asset Condition Monitoring Description The 3500 Transient Data Interface (TDI) is the interface between the 3500 monitoring system and GE s System 1* machinery
More information3500/45E Position Monitor
3500/45E Position Monitor Bently Nevada* Asset Condition Monitoring Description The 3500/45E Position Monitor is a 4-channel monitor that accepts input from proximity transducers, Rotary Position Transducers
More informationTermination Board FC-GPCS-SAI16-PF. Features. Assembly. Function. Connection. SAI-1620m HART 24 V DC (I), 24 V DC (II) Fault. Zone 0, 1, 2 Div.
Features Assembly System board for Honeywell Safety Manager For 6-channel AI card SAI-60m For 6 modules Recommended module: HiC05 (AI) 4 V DC supply Hazardous area: pluggable screw terminals, blue Non-hazardous
More informationVelomitor * Piezo-velocity Sensor
Velomitor * Piezo-velocity Sensor Bently Nevada* Asset Condition Monitoring Description Velomitor * Piezo-velocity Sensors measure absolute (relative to free space) bearing housing, casing, or structural
More information3500/15 Power Supply. Description
3500/15 Power Supply Description The 3500 Power Supplies are half-height modules and must be installed in the specially designed slots on the left side of the rack. The 3500 rack can contain one or two
More information3500/23E Transient Data Interface
3500/23E Transient Data Interface Bently Nevada* Asset Condition Monitoring Description The 3500/23E Transient Data Interface (TDI) is the interface between the 3500 ENCORE monitoring system and GE s System
More information3500 Galvanic Isolator Interface Bently Nevada* Asset Condition Monitoring
3500 Galvanic Isolator Interface Bently Nevada* Asset Condition Monitoring Description The 3500 Galvanic Isolator Interface is an intrinsically safe interface that can be located between a transducer system
More information9200, Seismoprobe * Bently Nevada* Asset Condition Monitoring
9200, 74712 Seismoprobe * Bently Nevada* Asset Condition Monitoring Description Bently Nevada Seismoprobe * Velocity Transducer Systems are designed to measure absolute (relative to free space) bearing
More informationTermination Board FC-GPCS-RIO16-PF. Features. Assembly. Function. Connection USIO/UPIO 24 V DC (I), 24 V DC (II) Fault. Zone 0, 1, 2 Div.
Features Assembly System board for Honeywell Universal Safety IO System board for Honeywell Universal Process IO For 6-channel cards USIO and UPIO For 6 modules Recommended modules: HiC8R (DI), HiC85R
More information3500/50E Tachometer Module
3500/50E Tachometer Module Bently Nevada* Asset Condition Monitoring Description The 3500/50E Tachometer Module is a 2-channel module that accepts input from proximity probes or magnetic pickups (except
More information5 Fieldbus Technology
5 Fieldbus Technology Ex e / Ex i 10922E00 The s Ex e/ex i connect intrinsically safe Foundation Fieldbus H1 or Profibus PA field devices to a non-intrinsically safe / Ex e trunk. Up to four intrinsically
More informationDeltaV Bulk Power Supplies
DeltaV Distributed Control System Product Data Sheet DeltaV Bulk Power Supplies DeltaV 5 A, 10A, 20 A, 40 A Bulk Power Supplies. DeltaV 20 A, 40 A and 80 A Bulk Power Supply Redundancy Modules. Easy to
More informationVibration Transducer Interface
Vibration Transducer Interface Description The Vibration Transducer Interface (VTI) is a galvanic isolation solution provided by GE s Bently Nevada product line. With the use of galvanic isolation, an
More informationDeltaV Bulk Power Supplies
DeltaV Distributed Control System Product Data Sheet DeltaV Bulk Power Supplies DeltaV 5 A, 10A, 20 A, 40 A Bulk Power Supplies. DeltaV 20 A, 40 A and 80 A Bulk Power Supply Redundancy Modules. Easy to
More informationAssembly MAU. MUX 4 Channels 8 Channels Zone 1
Multi-Input/Output Device for Cabinet Installation Features Assembly For discrete inputs and outputs Installation in Zone 1/Div. 1, intrinsically safe Sensors in Zone 0/Div. 1 Connection to fieldbus acc.
More informationTermination Board. HiCTB08-SCT-44C-SC-RA. Features. Assembly. Function. Connection. 24 V DC (I), 24 V DC (II), Fault. Zone 0, 1, 2 Div.
Termination Board HiCTB08-SCT-C-SC-RA Features Assembly For 8 modules V DC supply Supported signal types: DI/DO/AI/TI/AO Hazardous area: screw terminals, blue Safe area: screw terminals, black Function
More informationFLEX Ex Spring Clamp Terminal Base
Installation Instructions FLEX Ex Spring Clamp Terminal Base (Cat. No. 1797-TB3S) 1 10 11 4 Only remove this cover plug if connecting another terminal base unit. 3 5 6 12 2 7 8 9 41253 Component Identification
More informationInstallation Instructions
Installation Instructions (Cat. No. 1794-PS1) 1 2 3 4 5 7 6 Component Identification 1 Supply module 1794-PS1 2 Indicator 3 120/230V ac ground 4 120/230V ac common L2/N connections 5 120/230V ac power
More informationAssembly MAU. MUX 4 Channels 8 Channels Zone 1
Multi-Input/Output Device for Cabinet Installation Features Assembly For discrete inputs and outputs Installation in Zone 1/Div. 1, intrinsically safe Sensors in Zone 0/Div. 1 Connection to fieldbus acc.
More information4 Remote I/O. Analog Output Module HART Ex i / I.S. Outputs, 8 Channels Series 9466/12
0 4 Remote I/O 8 channels for controlling HART control valves and positioners Intrinsically safe outputs Ex ia IIC Galvanic isolation between outputs and system Open-circuit and short-circuit monitoring
More informationDescription. Specifications
R Specifications and Ordering Information 1701/15 FieldMonitor Proximitor Input Monitor for Radial Vibration and Thrust Position The 1701/15 FieldMonitor Proximitor Input Monitor is a 2-channel device
More informationBently Nevada 60M100 Monitor Bently Nevada* Asset Condition Monitoring
Bently Nevada 60M100 Monitor Bently Nevada* Asset Condition Monitoring Description The 60M100 Condition Monitoring System provides continuous on-line monitoring of Wind Turbine machine trains using sophisticated
More informationDigital Output Module 4-Channel Version for Zone 1 Series 9475/
www.stahl.de > 4-channel digital output > Intrinsically safe outputs Ex ib > Suitable for Ex i hydraulic valves and solenoid valves > Additional Ex i control input for (in accordance with IEC 61508 through
More informationDigital Output Module 8-Channel Version for Zone 2 Series 9475/
> 8-channel digital output > Intrinsically safe outputs Ex ia > For Ex i solenoid valves and display elements > Line fault monitoring per channel > Diagnostics based on NE107 > Module can be replaced in
More information3500/95 System Integrated PC Display Bently Nevada* Asset Condition Monitoring
3500/95 System Integrated PC Display Bently Nevada* Asset Condition Monitoring Description The 3500/95 System Integrated PC Display provides local or remote visual indication of all 3500 Machinery Protection
More informationDigital Output Module 8-Channel Version for Zone 2 Series 9475/
> 8-channel digital output > Intrinsically safe outputs Ex ia > For Ex i solenoid valves and display elements > Line fault monitoring per channel > Diagnostics based on NE107 > Module can be replaced in
More informationAssembly. Front view. LED yellow/red: Status output Ι/ Fault signal Function. Switch Power Rail
Switch Amplifier KCD-SR-Ex.LB Features Assembly -channel isolated barrier V DC supply (Power Rail) Dry contact or NAMUR inputs Usable as signal splitter ( input and outputs) Relay contact output Fault
More informationSIY. Features. PC-Programmable Signal Isolator/Converter
September 2017 Description Moore Industries Signal Isolator/Converter combines smart digital technology with advanced analog operation to deliver superior reliability, accuracy, and ease of use. The highly
More informationDigital Output Module 8-Channel Version for Zone 1 Series 9475/
www.stahl.de > 8-channel digital output > Intrinsically safe outputs Ex ia > For Ex i solenoid valves and display elements > Additional Ex i control input for "Plant STOP" (acc. IEC61508 up to SIL2) >
More information4 Remote I/O. Digital Output Module 8-Channel Version Series 9475/ from Rev. F
4 Remote I/O Digital Output Module 8-Channel Version 8 channels for Ex i / I.S. solenoid valves, piezo and booster valves Intrinsically safe outputs Ex ia IIC Additional input for "Outputs OFF" available
More informationDigital Output Module 4-Channel Version for Zone 1 Series 9475/
www.stahl.de > 4-channel digital output > Intrinsically safe outputs Ex ia > For Ex i solenoid valves and display elements > Additional Ex i control input for "Plant STOP" (acc. IEC61508 up to SIL2) >
More informationAssembly. Front view. LED yellow: Relay output. LED red: LB/SC Power Rail
Switch Amplifier Features Assembly -channel isolated barrier 4 V DC supply (Power Rail) Dry contact or NAMUR inputs Relay contact output Line fault detection (LFD) Reversible mode of operation Up to SIL
More informationSeparating and protective. Separating and protective instruments. VEGATRENN 149AEx Separator type KFDO Barrier type Product Information
Separating and protective instruments Separating and protective instruments VEGATRENN 149AEx Separator type KFDO Barrier type 9001 Product Information Content Content 1 Product description..........................................................................
More informationSegment Protector for Cabinet Installation R2-SP-IC* Features. Assembly. Function. Connection. Trunk, Ex na non-arcing. Spur.
egment Protector for Cabinet nstallation Features Assembly 4... 12 outputs Ex ic (FCO or Entity) or non-incendive (Div 2) Advanced fault isolation at the spur egment Protector in Zone 2/Div. 2 nstruments
More information21000,24701 Proximity Probe Housing Assemblies Bently Nevada Asset Condition Monitoring
21000,24701 Proximity Probe Housing Assemblies Bently Nevada Asset Condition Monitoring Description Proximity Probe Housing Assemblies Bently Nevada offers two all-metal Proximity Probe Housing Assemblies
More informationStartup instructions. AutoConfiguration Adapter ACA21-USB (EEC) ACA22-USB (EEC) ACA21-M12 (EEC) ACA22-M12 (EEC)
Startup instructions AutoConfiguration Adapter ACA21-USB (EEC) ACA22-USB (EEC) ACA21-M12 (EEC) ACA22-M12 (EEC) Release 02 04/2014 Technical Support https://hirschmann-support.belden.eu.com The naming of
More informationLevel-Lance Model 5400A
Sales Manual Section 100 PRODUCT SPECIFICATION 5400A GENERAL DESCRIPTION The ROBERTSHAW Level-Lance Model 5400A is a microprocessor based, multi-point On-Off capacitance type level detection system. Utilizing
More informationINSTRUCTION MANUAL. Universal AC Input Switching Power Supply 24 Vdc Output DIN-Rail Models PSD1000, PSD1000F PSD PSD1000F
PSD1000 - PSD1000F INSTRUCTION MANUAL Universal AC Input Switching Power Supply 24 Vdc Output DIN-Rail Models PSD1000, PSD1000F PSD1000 - Universal AC Input Switching Power Supply 24 Vdc Output ISM0089-4
More informationIntrinsically Safe Barriers
Intrinsically Safe Barriers Description Page No. Safety Barriers 464-472 Din Rail Isolated Barriers 473-488 477 Intrinsically Safe Barriers Product Overview We have simplified intrinsic safety! Cooper
More informationTHE BARRIER and the Universal Barrier Cabinets from Pepperl+Fuchs
THE BARRIER and the Universal Barrier Cabinets from Pepperl+Fuchs Overview This document provides information relating to the use of THE BARRIER HiC2, the SMART universal barrier from Pepperl+Fuchs, a
More information3500/53 Electronic Overspeed Detection System
3500/53 Electronic Overspeed Detection System Description The Bently Nevada Electronic Overspeed Detection System for the 3500 Series Machinery Detection System provides a highly reliable, fast response,
More informationProgramming unit VIATOR HART modems Model PU-H
Accessories Programming unit VIATOR HART modems Model PU-H WIKA data sheet SP 10.12 for further approvals see page 5 Applications Personal computer HART modem Communicates with all registered s Operates
More information3500/77M Recip Cylinder Pressure Monitor
3500/77M Recip Cylinder Pressure Monitor Bently Nevada Asset Condition Monitoring Description The 3500/77M Recip Cylinder Pressure Monitor is a 4-channel monitor that accepts input from Bently Nevada approved
More informationHIT/HIX HART Isolator
/ Isolator December 2017 Description Moore Industries Isolators provide highly economical solutions to common and costly problems that plague many of today s smart process loops. Protect and enhance your
More informationInstallation & Operation Manual
Via Enrico Fermi, 2 I-25015 Desenzano del Garda (BS) - Italy Phone: +39 030 7870787 Fax: +39 030 7870777 www.solexy.net BAF Intrinsically Safe Ethernet Coupler for signals operating in Hazardous Areas
More informationEthernet CPU Module & Power Module for Zone 1 / Div. 1 Series 9441/12 and 9444/12
www.stahl.de > Fieldbus connection Industrial Ethernet PROFINET, Modbus TCP or EtherNet/IP with 100 MBit/s > Redundant Ethernet connection (Modbus TCP) is possible > Explosion protected, optical inherently
More informationApprovals Quick Reference Guide Country Specific Ordering Options Bently Nevada* Asset Condition Monitoring
GE Measurement & Control Approvals Quick Reference Guide Country Specific Ordering Options Bently Nevada* Asset Condition Monitoring Document Summary This reference guide represents an overview of all
More informationSeries AMEL10-MJZ 10 Watt AC-DC / DC-DC Converter
Click on Series name for product info on aimtec.com Models Single output Model Input Voltage (VAC/Hz) FEATURES: Input Voltage (VDC) Max Output wattage (W) Output Voltage (V) Output Current max (A) Maximum
More informationSafety instructions. IECEx TUN Ex ia IIC T6 Gb
Safety instructions ÜSB62-36G.C_* and ÜSB62-30W.C_* IECEx TUN 07.0002 Ex [ia Ga] IIC T6 Gb Ex ia IIC T6 Gb 0044 39878 Content 1 Area of applicability 3 2 General 3 3 Electrical data 3 3.1 Application conditions
More informationIsolating repeater IRU 420
Isolating repeater IRU 420 Universal intrinsically safe isolating repeater of current signals 0/4 20 ma with option voltage output 0 10 V For supply sensors with output 0/4 20 ma in Galvanic separation
More information3500/22M Transient Data Interface
Specifications and Ordering Information 3500/22M Transient Data Interface Description The 3500 Transient Data Interface (TDI) is the interface between the 3500 monitoring system and Bently Nevada s System
More informationSafety instructions Overvoltage protection B81-35
Safety instructions Overvoltage protection B81-35 IECEx BVS 15.0084X Intrinsic safety Document ID: 51001 Contents 1 Area of applicability... 3 2 General information... 3 3 Technical data... 5 4 Application
More informationGeneral Specifications
General Specifications Field Wireless Communication Module GENERAL This General Specification (GS) describes the specifications for Field Wireless Communication Module. This product is based on the industrial
More information4 â Active barrier RN221N with optional HART diagnosis. Technical Information
Technical Information Active barrier with optional HART diagnosis Active barrier with power supply for safe separation of 4 to 20 ma current circuits Application Galvanic isolation of 4 to 20 ma current
More informationRanger* Pro Wireless Condition Monitoring
Ranger* Pro Wireless Condition Monitoring Datasheet Bently Nevada* Asset Condition Monitoring Product Datasheet The Ranger* Pro Wireless Condition Monitoring wireless vibration sensor allows you to monitor
More information9200, Seismoprobe
9200, 74712 Seismoprobe Description Bently Nevada Seismoprobe Velocity Transducer Systems are designed to measure absolute (relative to free space) bearing housing, casing, or structural vibration. The
More informationSFY Functional Safety Frequency-to-DC Transmitter with Display
Functional Safety -to-dc March 2017 Description The SFY Functional Safety SIL 3 capable -to-dc is part of Moore Industries FS Functional Safety Series. It monitors frequency, period, high or low pulse
More information991 Thrust Transmitter Bently Nevada* Asset Condition Monitoring
991 Thrust Transmitter Bently Nevada* Asset Condition Monitoring Description The 991 Thrust Transmitter is intended primarily for the original equipment manufacturers (OEMs) of centrifugal air compressors
More informationREDUNDANCY MODULE TSP-REM360 AND TSP-REM600
REDUNDANCY MODULE TSP-REM360 AND TSP-REM600 Operating Instructions Seite 1 Dimensions drawings: TSP-REM360 Weight: 0.882lb Gewicht: 0.40kg Seite 2 Dimensions drawings: TSP-REM600 Bottom view Top view Side
More informationS-series IS Electronic Marshalling
January 2013 Page 1 The DeltaV CHARM I/O Card (CIOC) with IS CHARMS Intrinsically Safe I/O anywhere you need it Integrated galvanic Isolation per channel Reduces installed cost of system Fully redundant
More informationInstallation Instructions
Installation Instructions (Cat. No. 1794-TBN) 6 1 5 9 4 2 3 10 6 7 8 Component Identification 1 Female flexbus connector 2 Terminal base unit (1794-TBN) 3 Male flexbus connector 4 Keyswitch Set to the
More informationMINI MCR-SL-RPS-I-I. Repeater power supply, active. Data sheet. 1 Description
Repeater power supply, active Data sheet 09_en_0 PHOENIX CONTACT 0--0 Description The. mm wide... repeater power supply supplies transmitters in the field and electrically isolates the input signal from
More informationSegment Protector for Cabinet Installation R2-SP-IC* Features. Assembly. Function. Connection. Trunk, Ex na non-arcing. Spur.
egment Protector for Cabinet nstallation Features Assembly 4... 12 outputs Ex ic (FCO or Entity) or non-incendive (Div 2) Advanced fault isolation at the spur egment Protector in Zone 2/Div. 2 nstruments
More informationArticle No. 6GK59230PS003AA2 6GK59240PS001AA2 Product Name. Power Supply SCALANCE PS924 PoE Input: 120/230V AC; Output: 54V/ 1.
Product Name Type of power supply Electrical data Input Waveform of the input Supply Power Supply SCALANCE PS924 PoE Input: 120/230V AC; Output: 54V/ 1.6A DC; NEC Class 2 single-phase AC Power Supply SCALANCE
More informationSafety Barriers. CEAG safety barriers can be used for all kinds of instrumentation applications.
Safety Barriers Description Safety barriers limit the energy fed to an intrinsically safe circuit so that neither sparks nor thermal effects (hot surfaces) can cause an explosion. CEAG safety barriers
More information4 Remote I/O. Digital Output Module 8-Channel Version Type 9475/ from Rev. F
4 Remote I/O Digital Output Module 8-Channel Version 8 channels for Ex i solenoid valves, piezo and booster-valves Intrinsically safe Ex ia IIC outputs Additional input for Plant-STOP available (acc. to
More information3500/23E Transient Data Interface
3500/23E Transient Data Interface Bently Nevada* Asset Condition Monitoring Description The 3500/23E Transient Data Interface (TDI) is the interface between the 3500 ENCORE monitoring system and GE s System
More informationSCOUT220-IS & SCOUT240-IS
SCOUT220-IS & SCOUT240-IS Product Datasheet Bently Nevada* Asset Condition Monitoring Description SCOUT220-IS and SCOUT240-IS are Intrinsically Safe portable data collector solutions designed for hazardous
More informationDistributed Intrinsically Safe Fieldbus Applications
Application Note FB01-1 - Distributed Intrinsically Safe Fieldbus Applications Emerson Process Management DeltaV DCS System Pepperl+Fuchs June 2003 Application Note FB01-2 - c Pepperl+Fuchs Inc. All rights
More informationSimple but elegant look and ease of installation make it ideal for various industrial applications.
This LDD240-WU DC/DC converter is the optimal response to the applications where compactness and high reliability are requested. It is isolated and offers a wide range of input and output voltages. Simple
More informationSeries AME25-JZ 25 Watt AC-DC / DC-DC Converter
FEATURES: Click on Series name for product info on aimtec.com Series AME-JZ I/O Isolation 000VAC Low Ripple and Noise Operating Temp: -0 C to +70 C Over Voltage Protection Over current Protection Up to
More information3300 XL 11mm Proximity Transducer System
33 XL 11mm Proximity Transducer System Bently Nevada* Asset Condition Monitoring Description Transducer System The 33 XL 11 mm Proximity Transducer System consists of: 33 XL 11 mm probe 33 XL 11 mm extension
More information3500/92 Communication Gateway
3500/92 Communication Gateway Description The 3500/92 Communication Gateway module provides extensive communication capabilities of all rack monitored values and statuses for integration with process control
More informationOperating Instructions
Introduction To protect the signal lines of field devices and systems in the cabinet against lightning. Pepperl+Fuchs covers the complete range of Surge Protection Barriers. Housing types Depending on
More informationPHOENIX CONTACT - 05/2007
Ex Universal Module Carrier (Motherboard) for Accommodating 3-Wire Measuring Transducers, Intrinsically Safe, for a Maximum of 8 PI Ex Modules INTERFACE Data Sheet 103030_00_en PHOENIX CONTACT - 05/2007
More informationMINI MCR-SL-UI-2I-NC. Extract from the online catalog. Order No.:
Extract from the online catalog MINI MCR-SL-UI-2I-NC Order No.: 2864176 4-way signal duplicator for electrical isolation and duplication of analog signals with screw connection, standard configuration
More informationmicroblox I/O Modules w/ Bluetooth Wireless Technology Introduction to the microblox Module Family
microblox I/O Modules w/ Bluetooth Wireless Technology Introduction to the microblox Module Family The microblox (ub) family of analog I/O modules and back-panel carriers offer a modern and flexible space-saving
More informationECHOMAX XPS-10 ULTRASONIC TRANSDUCER
Datasheet ECHOMX XPS-10 ULTRSONIC TRNSDUCER Supplied by.com Call us on + (0)118 916 920 Email info@27able.com Overview transducers use ultrasonic technology to measure level in a wide range of liquids
More informationSeries AME5-CJZ 5 Watt AC-DC / DC-DC Converter
Click on Series name for product info on aimtec.com FEATURES: I/O Isolation 000V Continuous Short circuit protection Operating Temp: -2 C to 0 C Energy Star compliant Input: -26V, -6Hz, or 20-0VDC pact
More informationNI REM Remote I/O Overview DATASHEET. Digital Input Module for Remote I/O
DATASHEET NI REM-11154 Digital Input Module for Remote I/O Read digital input frequencies up to 5 khz Adjustable filter time to improve measurement quality Spring-terminal connectors allow fast wiring
More informationRedundancy Module QUINT-DIODE/40
Redundancy Module QUT DIODE provides: 00% decoupling of power supplies connected in parallel Can be installed in potentially explosive areas Load currents up to 60 A supported Easy assembly by snapping
More informationTechnical Data. General specifications. Rated operating distance s n 3 mm
0102 Model Number Features Direct mounting on standard actuators Compact and stable housing with terminal compartment connection ATEX & IECEX certifications Usable up to SIL 2 acc. to IEC 61508 Weatherproof
More information