onlinecomponents.com
|
|
|
- Rosemary Holmes
- 6 years ago
- Views:
Transcription
1 Standard-type Connector- Conversion Units XWB CSM_XWB_DS_E Simplifies Connector and terminal block replacement, and requires less in-panel wiring. Mount to DIN Track or via screws. MIL Flat Cable Connectors and Multi-pole, Square Connectors are standard. Terminal blocks available with either M or M screws. Connecting Cables for Programmable Controllers available (sold separately). Ordering Information Connectors Flat Cable Twin-connector Type Connector No. of poles Appearance Model M screws M screws M screws Flat Cable Connectors * 0 XWB-0G XWB-G 0 XWB-0G XWB-G 60 XWB-60G 0 XWB-0G5 XWB-G5 0 XWB-0G5 XWB-G5 60 XWB-60G5 0 XWB-0G5-T Daisy Chain 0 XWB-0G5-D Multi-pole, Square Connector M screws M screws Multi-pole, Square Connector Plugs * Multi-pole, Square Connector Plugs * 0 XWB-0Y XWB-Y XWB-Y 0 XWB-0Y5 XWB-Y5 XWB-Y5 0 XWB-0X5 XWB-X5 XWB-X5 Board I/O M screws Multi-pole, Square Connector Plugs * 0 XWB-0F5-P *. Flat Cable Connectors have one polarity slot. *. These Plugs and Sockets are made by Honda Tsushin Kogyo. *. These Plugs are made by Fujitsu. Accessories (Order Separately) Connecting Cables for Connector- Conversion Units For details on the Connecting Cable used between XWB Daisy Chain-type Connectors, refer to the XWZ datasheet.
2 Ratings and Specifications XWB Type Item Flat Cable Units Rated current A Rated voltage 5 VAC Insulation resistance 00 MΩ min. (at 0 VDC) Dielectric strength Ambient operating temperature 0 VAC for min (leakage current: ma max.) 0 to 55 C XWB-@@Y@ Multi-pole, Square-connector Units XWB-0F5-P Board I/O Unit (Unit: mm) Flat Cable Units with a with M Screws XWB-@@G Wiring Diagram Flat Cable Connector Triangular mark Model Note: All pins on the Flat Cable Connector correspond -to- to the terminal of the same number on the terminal block as shown above. XWB-0G XWB-G XWB-0G XWB-G XWB-60G *. Either the XG5M-@@-N or the XG5M-@@5-N may be used. *. Each Connector requires two Semi-covers. N- N- N- N- N N- N- N 9.5 (order separately) Flat Cable Connectors, MIL Sockets with Discrete-wire IDC Connectors, Double-row Sockets Strain Reliefs Connectors * Semi-covers * XGM-00-T XGM-0-T XGM-00-T XGM-0-T XGM-600-T 5.08 Flat Cable Connector (MIL Plug) A XG5M-0-N XG5M-05-N XG5M--N XG5M-5-N XG5M-0-N XG5M-05-N XG5M--N XG5M-5-N XG5M-60-N XG5M-605-N 5.5 dia. 0.5 *Flat Cable Connectors have one polarity slot. Note: Terminal block pitch is 5.08 mm. Use a wire size between 0. and.5 mm (AWG to AWG6). The wire insertion holes are.8.5 (H W) mm (5.) Model No. of poles Dimension A (mm) Applicable Connector models * XWB-0G XGA-0 XWB-G.5 XGA- XWB-0G XGA-0 XWB-G 5.5 XGA- XWB-60G XGA-60 XG5S-00 XG5S-0 XG5S-00 XG5S- XG5S-00
3 XWB Flat Cable Units with a with M Screws XWB-@@G5 Flat Cable Connector (MIL Plug) dia Terminal Block Wiring Diagram Flat Cable Connector Triangular mark Model Note: All pins on the Flat Cable Connector correspond -to- to the terminal of the same number on the terminal block as shown above. XWB-0G5 XWB-G5 XWB-0G5 XWB-G5 XWB-60G5 *. Either the XG5M-@@-N or the XG5M-@@5-N may be used. *. Each Connector requires two Semi-covers. N- N- N- N- N N- N- N *Flat Cable Connectors have one polarity slot. Note: Terminal block pitch is 8.5 mm. (order separately) Flat Cable Connectors, MIL Sockets with Discrete-wire IDC Connectors, Double-row Sockets Strain Reliefs Connectors * Semi-covers * XGM-00-T XGM-0-T XGM-00-T XGM-0-T XGM-600-T XG5M-0-N XG5M-05-N XG5M--N XG5M-5-N XG5M-0-N XG5M-05-N XG5M--N XG5M-5-N XG5M-60-N XG5M-605-N Model No. of poles Dimension A (mm) Applicable Connector models * XWB-0G5 0.5 XGA-0 XWB-G XGA- XWB-0G XGA-0 XWB-G5.5 XGA- XWB-60G XGA-60 XG5S-00 XG5S-0 XG5S-00 XG5S- XG5S-00 (5.) 0.5
4 XWB Twin-connector Units with a with M Screws XWB-0G5-T 0.5 Flat Cable Connector (MIL Plug: XGA-0 ) dia (5.) Wiring Diagram Flat Cable Connector Triangular mark Model XWB-0G5-T Triangular mark *. Either the XG5M-@@-N or the XG5M-@@5-N may be used. *. Each Connector requires two Semi-covers. 0 9 Note: All pins on the Flat Cable Connector correspond -to- to the terminal of the same number on the terminal block as shown above (order separately) Flat Cable Connectors, MIL Sockets with Discrete-wire IDC Connectors, Double-row Sockets Strain Reliefs Connectors * Semi-covers * XGM-00-T 0 XG5M-0-N XG5M-05-N 0.5 XG5S-00
5 XWB Daisy Chain Units with a with M Screws XWB-0G5-D 9.5 Flat Cable Connector (MIL Plug: XGA-0 ) dia Wiring Diagram Flat Cable Connector Triangular mark Model XWB-0G5-D 0 9 Triangular mark 9 Note: All pins on the Flat Cable Connector correspond -to- to the terminal of the same number on the terminal block as shown above. *. Either the XG5M-@@-N or the XG5M-@@5-N may be used. *. Each Connector requires two Semi-covers (order separately) Flat Cable Connectors, MIL Sockets with Discrete-wire IDC Connectors, Double-row Sockets Strain Reliefs Connectors * Semi-covers * XGM-00-T XG5M-0-N XG5M-05-N.8 (5.) 0.5 XG5S-00 5
6 XWB Multi-pole, Square-connector Plug Units with a with M Screws XWB-@@Y A 9.5 Multi-contact Connector (Plug) 5.5 dia Wiring Diagram (Example for Terminal Block with Poles) Multi-contact, Square Connector Model * Hood * XWB-0Y XWB-Y XWB-Y 9 Note: All pins on the Multi-pole, Square Connector correspond -to- to the terminal of the same number on the terminal block as shown above. 5 6 MR-0F (soldered) MRP-0F0 (crimped) * MR-0FW (wrapped) MR-F (soldered) MRP-F0 (crimped) * MR-FW (wrapped) MR-F (soldered) MRP-F0 (crimped) * MR-FW (wrapped) MR-0L MR-L MR-L *. All applicable Connector Hoods are made by Honda Tsushin Kogyo. *. Use MRP-F or MRP-F0 crimp terminals made by Honda Tsushin Kogyo Model No. of poles Dimension A (mm) Applicable Connector models * XWB-0Y MR-0RMD XWB-Y.5 MR-RMD XWB-Y 5.5 MR-RMD *These Connectors are made by Honda Tsushin Kogyo. Note: Terminal block pitch is 5.08 mm. Use a wire size between 0. and.5 mm (AWG to AWG6). The wire insertion holes are.8.5 (H W) mm. 6
7 XWB Multi-pole, Square-connector Plug Units with a with M Screws XWB-@@Y5 Multi-contact, Square Connector (Plug) A dia Wiring Diagram (Example for Terminal Block with Poles) Multi-contact, Square Connector Model * Hood * XWB-0Y5 XWB-Y5 XWB-Y5 9 Note: All pins on the Multi-pole, Square Connector correspond -to- to the terminal of the same number on the terminal block as shown above. 5 6 MR-0F (soldered) MRP-0F0 (crimped) * MR-0FW (wrapped) MR-F (soldered) MRP-F0 (crimped) * MR-FW (wrapped) MR-F (soldered) MRP-F0 (crimped) * MR-FW (wrapped) MR-0L MR-L MR-L *. All applicable Connector Hoods are made by Honda Tsushin Kogyo. *. Use MRP-F or MRP-F0 crimp terminals made by Honda Tsushin Kogyo Model No. of Dimension A Applicable Connector poles (mm) models * XWB-0Y5 0.5 MR-0RMD XWB-Y MR-RMD XWB-Y5.5 MR-RMD *These Connectors are made by Honda Tsushin Kogyo. Note: Terminal block pitch is 8.5 mm
8 XWB Multi-pole, Square Connector Socket Units with a with M Screws XWB-@@X5 Multi-contact, Square Connector (Socket) A dia Wiring Diagram (Example for with Poles) Multi-contact, Square Connector Model * Hood * XWB-0X5 XWB-X5 XWB-X5 9 5 Note: All pins on the Multi-pole, Square Connector correspond - to- to the terminal of the same number on the terminal block as shown above MR-0M (soldered) MRP-0M0 (crimped) * MR-0MW (wrapped) MR-M (soldered) MRP-M0 (crimped) * MR-MW (wrapped) MR-M (soldered) MRP-M0 (crimped) * MR-MW (wrapped) MR-0L MR-L MR-L *. All applicable Connector Hoods are made by Honda Tsushin Kogyo. *. Use MRP-F or MRP-F0 crimp terminals made by Honda Tsushin Kogyo Model No. of poles Dimension A (mm) Applicable Connector models * XWB-0X5 0.5 MR-0RFD XWB-X MR-RFD XWB-X5.5 MR-RFD *These Connectors are made by Honda Tsushin Kogyo. Note: Terminal block pitch is 8.5 mm
9 XWB Board I/O Units with a with M Screws XWB-0F5-P M.6 I/O Board Connectors (0-pin Plug) dia Wiring Diagram FCN-6P00-AU Plug Model * Hood * XWB-0F5-P B A FCN6J00-AU (soldered) FCN6J00-AAU (crimped) FCN60C00- B Model No. of poles and Circuits * XWB-0F5-P 0 *These Connectors and circuits are made by Fujitsu. Note: Terminal block pitch is 8.5 mm. FCN-6P0-AU (Connector) FCN-60A (Anchor) *. All applicable Connectors and Covers are made by Fujitsu. *. Refer to the OMNUC U Series user's manual for details on the Connecting Cable used between the XWB-0F5-P and the U-series AC Servo Driver. 9
10 Safety Precautions XWB Precautions for Correct Use Wiring Always turn OFF the power supply before wiring. Otherwise, cables or other conductors can short the terminals and cause the Unit to fail. Do not connect or disconnect Connectors with the power turned ON. Otherwise, it may cause malfunctions. Wiring s Direct Wire Connections with a with M Screws. Use a wire size between 0. and.5 mm (AWG to AWG6).. Prepare the end of each wire as shown in the following diagram.. The wire insertion holes are.8.5 (H W) mm on the terminal block with M screws. Direct Wire Connections with a with M Screws Round. mm dia. Applicable crimp terminals Round Forked Y- (With a with M Screws) Round rod Dia. 6 mm 6.8 mm max. Forked Y- Blade W. mm 6.8 mm max. Applicable wires AWG to AWG6 (0.0 to.5 mm ) AWG6 to AWG (.5 to.0 mm ) AWG to AWG6 (0.0 to.5 mm ) AWG6 to AWG (.5 to.0 mm ) Terminal Screw Tightening Torque Select a tightening torque from the following table when connecting wires or crimp terminals to the terminal block. Tightening torque N m With M screws 0.0 With M screws 0.59 Mounting Units to and Removing Units from DIN Track For terminal blocks with M screws, use a flat-heat screwdriver like the one shown in the following diagram..9- to -mm blade Screw slot width: 0. XWB Connector- Conversion Units can be mounted side-to-side on DIN Track. The flanges for mounting screws are located on each side at the bottom of the XWB. Secure both ends of the XWB with End Plates. When removing the Unit from a DIN Track, insert a flat-head screwdriver into the slider and pull the lock out. Applicable crimp terminals Rod Blade t = 0.5 TC-05 Dia. = TC-.5S Dia. =.5 BT.5-9- BT.5-0- W =. Applicable wires AWG to AWG8 (0.0 to 0.5 mm ) AWG to AWG6 (0.0 to.5 mm ) AWG to AWG6 (0.0 to.5 mm ) Note: Round rod and blade crimp terminals are made by Nichifu. 0
Type Terminal Block Connector No. of poles Appearance Model 40 XW2B-40G4 50 XW2B-50G4 40 XW2B-40G5 *1 50 XW2B-50G5 60 XW2B-60G5 40 XW2B-40G5-T
Standard-type Connector- Conversion Units XWB CSM_XWB_DS_E Simplifies Connector and terminal block replacement, and requires less in-panel wiring. Mount to DIN Track or via screws. MIL Flat Cable Connectors
Type Terminal Block Connector No. of poles Appearance Model 40 XW2B-40G4 50 XW2B-50G4. 40 XW2B-40G5 Flat Cable Connectors
Standard-type Connector- Conversion Units XWB CSM_XWB_DS_E Simplifies Connector and terminal block replacement, and requires less in-panel wiring. Mount to DIN Track or via screws. MIL Flat Cable Connectors
Dimension A. Dimension B
Slim Connector-Terminal lock Conversion Units CSM DS_E_2_3 New Slim Connector-Terminal lock Conversion Units. Mounting area reduced by 35% (in comparison with 40-pole XW2 Units) to contribute to downsizing
Dimension A. Dimension B
Slim Connector- Conversion Units XW2D CSM_XW2D_DS_E_2_1 New Slim Connector- Conversion Units. Mounting area reduced by 35% (in comparison with 40-pole XW2 Units) to contribute to downsizing control panels
Digital I/O Units Compatible with MULTIPLE I/O TERMINAL
Digital I/O Units T-@D(-)/@DMX(-)/@DML(-)/@DML(-)/@DDS(-) Digital I/O Units Compatible with MULTIPLE I/O TERMAL Terminal block, connector, and high-density connector models are available. The circuit block
Materials. Specification Operating temperature range. 55 C to +105 C Current rating
PC BOARD CONNECTORS 700 SERIES Features The 700 series connector has a superior ejector with a unique flexible latch. Terminals are palladium plated and have an excellent cost performance ratio. The solder
Round Water-resistant Connectors (M12) XS2
Round Water-resistant Connectors (M) XS Water- and Environment-resistive FA Connectors Save Wiring and Maintenance Effort Compact FA connectors satisfy IP67 requirements and ensure a 9V-0 fire retardant
XC5. DIN-style Twin-contact Connectors. Expanding the DIN Concept. Materials and Finish. Ratings and Characteristics
DIN-style Twin-contact Connectors Expanding the DIN Concept Mates with DIN connectors. Ideal for automated soldering because the Connectors sit on top of the board. Mounting dimensions of the DIN Style-1
XW3B. Connector Terminal Boxes. Ratings and Specifications. Compatible Connectors. Materials and Finish
es XWB Series Includes New Lightweight, Low-profile Connector Terminal Boxes for Use Outside of Control Boxes to Centralize I/O with Reduced Labor and Greater Environmental Resistance Tough model with
Switches and Indicators 84
Switches and Indicators 84 84 Switches and Indicators Index Series 84 Description Page 177 Product Assembly Page 178 Mounting Instruction Page 179 Product Range - pushbuttons for flush mounting - accessories
XH2. Half-pitch Board-to-Board Connectors
Half-pitch Board-to-Board Connectors XH2 Allows High-density Mounting for Electronic Devices. A Half-Pitch Connector with a 1.27-mm Pitch for Compactness. A pitch of 1.27 mm for high-density mounting of
FOR PC BOARD TO FLAT CABLE
AXM FOR PC BOARD TO FLAT CABLE MIL CONNECTORS (AXM) Density mounting Long lever type Short lever type Compliance with RoHS Directive FEATURES 1. High density mounting is possible. Even with mounting right
Model Number Structure
Solid State Relays with Failure Detection Function G3PC CSM_G3PC_DS_E_1_1 Refer to Safety Precautions for All Solid State Relays. Detects failures in SSR used for heater temperature control and simultaneously
Solid-state Timer. Ordering Information. Specifications. Miniature Timer Compatible with the MY Relay. Accessories. Time Ranges
Solid-state Timer Miniature Timer Compatible with the MY Relay Large transparent time-setting knob facilitates time setting. Flat-blade and Phillips screwdrivers can also be used for time setting. Approved
Transistor drive 2c/4c 5A slim power relays
Transistor drive c/c 5A slim power relays NC RELAYS NC Flat type () NC (Plug-in type) RoHS compliant NC Flat type () NC () FEATURES 1. Compact, slim design Use of high-performance flat electromagnetic
Connector with mm square contacts DIC- 131 DIC- DIC- 129 DIC- 128A DIC- 129A AC 500V AC 1000V. 20 milliohms or less
mm Pitch Connectors DIC series mm Pitch Connectors Outline The DIC series provides various connectors for switching between circuits on PCB in combination with various male connectors, for various-pattern
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment
Artisan Technology roup is your source for quality new and certified-used/pre-owned equipment FAST SHIPPIN AND DELIERY TENS OF THOUSANDS OF IN-STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MANUFACTURERS SUPPORTED
Model Number Structure
Solid State Relays with Failure Detection Function G3PC Detects failures in SSR used for heater temperature control and simultaneously outputs alarm signal. This SSR supports the safe design of heater
Model Number Structure
Solid State Relays CSM DS_E_3_1 Compact, Low-cost, SSR Switching 5 to 20 A Wide load voltage range: 75 to 264 VAC. Both 100-V and 200-V loads can be handled with the same model. Dedicated, compact aluminum
IDC for 50mil(1.27mm) Falt Cable with One-touch Locking Ejector System 50mil(1.27mm) PITCH 2 PIECE CONNECTOR 8822E SERIES C-41
IDC for mil(1.27mm) Falt Cable with One-touch Locking Ejector System mil(1.27mm) PITCH 2 PIECE CONNECTOR 8822E SERIES C-41 8822E/8830E/8831E SERIES 1.27mm PITCH 2 PIECE CONNECTOR / IDC FOR 1.27mm (mil)
Solid-state Timer. Ordering Information. Miniature Timer with Multiple Time Ranges and Multiple Operating Modes H3YN- - Accessories (Order Separately)
Solid-state Timer Miniature Timer with Multiple Time Ranges and Multiple Operating Modes Minimizes stock. Pin configuration compatible with MY Power Relay. Standard multiple operating modes and multiple
G3PC. Model Number Structure. Solid State Relays with Failure Detection Function. Model Number Legend
Solid State Relays with Failure Detection Function G3PC Refer to Warranty and Application Considerations (page 1), Safety Precautions (page 4), and Technical and Safety Information (page 6). Detects failures
D2D. Door Interlock Switch. Ordering Information. Power Switch with Minimum Contact Gap of 3 mm. Model Number Legend.
Door Interlock Switch Power Switch with Minimum Contact Gap of 3 mm Offers the minimum contact gap of 3 mm required for power switches as standard equipment. Highly reliable design conforms to European
Round Water-resistant Connectors (M8) XS3
Round Water-resistant Connectors () XS Compact, Watertight, Round Connectors Water-resistive, compact connector meets IP67 requirements. Ideal for a wide variety of FA and OA applications. Using connectors
ORDERING INFORMATION: P/N 5 2 M D - x x M x HALF PITCH (1.27MM) D-SUB. IDC TYPE CABLE MALE CONNECTOR WITHOUT HOOD C0201
HALF PITCH (1.27MM) D-SUB. IDC TYPE CABLE MALE CONNECTOR WITHOUT HOOD Cover & Holder: Plastic Thermoplastic UL94V-0, P.B.T. UL94V-0, Black A B C D 20 20.20 15.80 9.30 15.00 26 24.00 19.65 9.30 15.00 36
Technical Explanation for Wiring Systems
CSM_Connector_TG_E_1_1 Introduction What Is a Wiring System? A Wiring System is a device that is used to convert a connection to a connector to connect (wire) a device or circuit. Converting connections
CABLE CONNECTOR 6100/6200/6200S/6230 SERIES. 2.54mm Pitch Flat Ribbon Cable Connector K-7
CABLE CONNECTOR 2.54mm Pitch Flat Ribbon Cable Connector 6/6/6S/62 SERIES K-7 6/6/6S/62 SERIES 2.5mm PITCH FC CONNECTOR 2.54mm Pitch FC Connector Product Line-up SERIES / FIGURE TYPE CONNECTOR STYLE TERMINATION
Connector-Terminal Block Conversion Unites XW2R Series Speedy Get Waste-free Connections in the Ideal Style Excellent Universal Different Styles
Connector Conversion Unites XWR Series Speedy Get Wastefree Connections in the Ideal Style Excellent Universal Select from Different Styles Select from Three Styles of Units for a Dramatic re You Wasting
Solid-state Timer H3YN
Solid-state Timer H3YN Miniature Timer with Multiple Time Ranges and Multiple Operating Modes Minimizes stock. Pin configuration compatible with MY Power Relay. Standard multiple operating modes and multiple
E3S-A. Built-in Amplifier Photoelectric Sensor (Medium Size) Ordering Information. Built-in Amplifier Photoelectric Sensors. Horizontal. 7 m.
Built-in Amplifier (Medium Size) ES-A Be sure to read Safety Precautions on page 0. Ordering Information Built-in Amplifier s Red light Infrared light Sensing method Appearance Connection method Sensing
E3S-A. Built-in Amplifier Photoelectric Sensor (Medium Size) Ordering Information. Built-in Amplifier Photoelectric Sensors. Horizontal. 7 m.
Built-in Amplifier (Medium Size) ES-A CSM_ES-A_DS_E Be sure to read Safety Precautions on page 0. Ordering Information Built-in Amplifier s Red light Infrared light Sensing method Appearance Connection
RUC-M industrial relays for DC loads
Contact data Number and type of contacts Contact material Rated / max. switching voltage Min. switching voltage Rated load Min. switching current Max. inrush current Rated current Min. breaking capacity
Switching Power Supply S8E1. Ordering Information. Compact and Economical Switching Power Supply
Switching Power Supply Compact and Economical Switching Power Supply Models range from 10 to 50 W Open-frame and covered types Wide range of output voltage: 5-, 12-, 15- and 24-V models UL, CSA approved
Industrial Control Relays Relays and terminal module RS type
Relaysandterminal module Relays-and-terminal module RS, N A very compact, space-saving terminal module containing four or six relays with one NO contact. Features The RS series relays-and-terminal module
(Applicable output load) to 264 (see note 2) (see note 1) (2Aat75to264VAC) G3R-202SLN-US PCB Yes 2 A at 100 to 120 VDC. (2 A at 75 to 132 VDC)
Solid-state Relay Compact SSRs Ideal for Built-in Applications Vertical, compact SSRs with an operation indicator offered in versatile variations. Can be mounted side by side with an electromagnetic relay
Slim Relay G2RV. Model Number Structure. Ordering Information. Model Number Legend. List of Models. Relay and Socket Combinations
Slim Relay G2RV The World's First Industrial Slim Relay Large plug-in terminals for reliable connection. LED indicator and mechanical flag to check operation. Transparent housing enables checking relay
Technical data: Pin Spacing
282 Female Connectors, Double-Row Pin Spacing: 3.5 mm Universal connection for all conductor types Unique, compact, double-row connector system for conductor cross sections up to 1.5 mm 2 High-density,
Wiring Systems I/O Blocks, I/O Terminals, and I/O Block Bases
Wiring Systems I/O Blocks, I/O Terminals, and I/O Block Bases Wiring Systems Programmable Controllers G7@ Relay I/O Blocks and Cables 383 G70A I/O Terminal Bases 386 G70D Relay Output Terminal Blocks 387
Special-purpose Basic Switch
Special-purpose Basic Switch DPDT Basic Switch for Two Independent Circuit Control Incorporates two completely independent built-in switches. Ideal for switching the circuits operating on two different
RUC industrial relays of small dimensions
Contact data Number and type of contacts Contact material Rated / max. switching voltage Min. switching voltage Rated load Min. switching current Max. inrush current Rated current Max. breaking capacity
Introduction. The information pages provide standard data common to all D-subminiature connectors. These include:
Connectors Information Introduction The D-subminiature is one of the most popular styles of connectors in the I/O category. It is used in computer, telecom, datacom, medical, and test instrumentation applications
D-Sub SEaled subminiature D connectors, 2.54 mm pitch
SE D-Sub SEaled subminiature D connectors, 2.54 mm pitch Page Technical characteristics.......................................... 02 IP 67 versions with turned solder cups......... 04 IP 67 versions with
XC7. DIN Sequence Connectors. An improved DIN-standard Sequence. Connectors. connectors. Ratings and Characteristics. Materials and Finish
DIN Sequence Connectors XC7 An improved DIN-standard Sequence Connector ows power line to daughter board connection first and removal last. Used the same way as regular DIN connectors. Dimensions are those
Powermate Range pitch 10.16
Contents owermate Range pitch.16 owermate Range pitch.16 owermate Range pitch.16 Male connectors with solder connection.2 Socket connectors with clamping yoke connection.8.1 owermate Range pitch.16 SU.16/9
S8VE (60/90/120/180/240-W Models)
Switch Mode Power Supply S8VE (60/90/120/180/240-W Models) CSM_S8VE_DS_E_1_1 60/90/120/180/240-W Models Improved Versions of Standard-type Power Supplies without Indication Monitor. Safety standards: UL508/60950-1,
RIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) 20 NOVO MIL/CTR 15DP,LEAD FREE 1658621-4
Replacing the Power Supply
APPENDIX B This appendix includes information on how to replace the power supply for the Cisco AS550XM universal gateway and contains the following sections: Safety Recommendations, page B-1 Required Tools
Functional configuration Rated input voltage Power ratings Output voltage Output current Part number Non-PFC
Switching Power Supply DIN-Rail Mount Power Supply With Capacity Up to 240 W for General or Industrial Applications Wide power range: 15 to 240 W 15 W and PFC Models with Universal voltage of 100 to 230
Time-limit contact Time ranges Supply voltage Mounting s to 3 h 24, 100 to 120, 200 to 230 VAC (50/60 Hz); 12, 24, 48, 125, 100 to 110 VDC
Solid-state Timer CSM DS_E_4_1 Miniature Timer Compatible with the MY Relay Semi-multi power supply voltage. Large transparent time setting knob facilitates time setting. A flat-blade and Phillips screwdriver
Oil-resistive, Long-range Photoelectric Sensor with Metal Housing
Oil-resistive, Long-range with Metal Housing ES-C Water- and Oil-resistive with Metal Housing Used for Long-range Sensing Satisfies the water- and oil-resistive requirements and safe enough for use in
Terminals Solder terminals Quick-connect. PCB terminals terminals (#110) 3 A Pin plunger SS-3GP SS-3GPT SS-3GPD SS-3GPB
Subminiature Basic Switch SS-P SS Series Compatible Mounting with a Simple Construction and Easy-to-Use Design Concept Insert molded base and improved case-to-base seal provides enhanced resistance to
Male header, 100% protected against mismating, (1 x 1) mm straight solder pins Pin spacing 3.5 mm 3.81 mm. light gray <_ 8,5_> 3,5 1x1 <_ 9,3_>
96 Male Headers with Solder Pins; Double-Deck Male Headers with Solder Pins, Pin Spacing 3.5 mm and 3.81 mm 160 V/.5 kv/ 300 V, 10 A U 10 A 300 V, 10 A 160 V/.5 kv/ 300 V, 10 A U 10 A 300 V, 10 A 160 V/.5
RUC industrial relays of small dimensions
with adaptor (V) with adaptor (H) Power relays of general application AC and DC coils Mounting: in sockets; 35 mm rail mount acc. to PN-EN 60715; on panel; PCB Versions: faston 187 (4,8 x 0,5 mm); faston
Varistor installation. Input logic. Voltage of relay coil
Features For driving various loads using PLC output signals Easily check operation status and high luminance LED turns on with input signals Choose various relays depending on each load voltage or current
VZBs. Power PCB Relay RT2 2 pole 8 A, DC and AC-coil. Features. Contact data
Features 2 C/O or 2 N/O contacts Sensitive coil 400 mw DC- or AC-coil 5 kv / 10 mm coil-contact Protection class II (VDE 0700) Height 15.7 mm Sockets with PCB-type or screw-type terminals Applications
RT-1 PC RELAY TERMINAL RT-1 PC TERMINAL
RT- Wide variation relay RT- PC RELAY TERMINAL RT- PC TERMINAL RT- PC Relay (PQ relays mounted) RT- PC points points points points FEATURES. Easy connecting and simplified wiring Connection to the various
masterelectronics.com onlinecomponents.com
Basic Switch MINIATURE Watertight Miniature Basic Switch High-quality watertight, high-precision miniature basic switch meets IP67 requirements (IEC 529) Monoblock construction assures high sealing capability
Inductive Proximity Sensor
Inductive Proximity Sensor Subminiature Sensor with Cable Amplifier Offers Greater Mounting Flexibility Programmable Controller-compatible Subminiature, shielded sensing head (3 or 8 dia.) allows the Sensor
PC RELAY TERMINAL/ PC TERMINAL
Input points Output points PC Relay (PC relays mounted) PC Input points Output points Input points Output points Input points Output points Input points Output points Output points ORDERING INFORMATION
Model Number Structure
Thumbwheel Switch Refer to Warranty and Application Considerations (page 1) and Safety Precautions (page 3). General-purpose Thumbwheel Switches A wide range of output codes are available. Use the back-mounting
SEPTEMBER C.CS.1000 / GB
SEPTEMBER 2005 - C.CS.1000 / GB C R I M P F L E X C O N N E C T O R S CRIMPFLEX connectors TECHNICAL DATA MATERIAL Phosphor bronze MALE SOLDER TAB PLATING The standard connector is tin plated (thickness
RM84 miniature relays
RM84 miniature relays RM84 Contact data Number and type of contacts Contact material Rated / max. switching voltage Min. switching voltage Rated load (capacity) AC AC1 AC15 DC1 DC13 Motor load acc. to
H3CA-8H-AC/100/110/120
Solid-State Timer 1/16 DIN, Digital-Set Timer with 0.1 Second to 9,990 Hours Range 8 field-selectable operation modes Universal AC/DC supply voltage timers available Operations include ON-delay, Repeat
Operation mode. Output configuration. Relay DC SSR. Light-ON Dark-ON (switch selectable) Relay DC SSR. Relay DC SSR
Built-in Power Supply Photoelectric Sensor CSM DS_E_12_3 Model Contribute to Overall Cost Reduction erminal Block Models Easy to wire and adjust. For the most recent information on models that have been
Basic Switch. Pin plunger Short hinge Hinge lever Long hinge lever Simulated hinge Short hinge Hinge roller lever lever roller lever lever
Basic Switch MINIATURE Watertight Miniature Basic Switch High-quality watertight, high-precision miniature basic switch meets IP67 requirements IEC 529 (lead wire type) Monoblock construction assures high
Classification Enclosure rating Input voltage Type of
Slim Relay G2RV The World's First Industrial Slim Relay Large plug-in terminals for reliable connection. LED indicator and mechanical flag to check operation. Special input type with gold plated contacts.
Inductive Proximity Sensor
Inductive Proximity Sensor Miniature, Slim-styled Proximity Sensor Space-saving Sensor ideal for timing cam and dog detection. Four mounting holes provided: two each mounting from side or rear of the housing.
RIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) IDC LOW PRO HDR 30P VERT LG LA AMP-LATCH
Standard Products Assembly Equipment Table 3M Electronic Products Division
Plug Connectors 3M plug connectors can be used with either flat cable or discrete wire and are the ideal interface for standard sockets. They can be used as a T-tap from a cable bus, a splice connector
PRODUCT SPECIFICATION. PC Board Relays. Series.
PRODUCT SPECIFICATION PC Board Relays 26 Series www.wernerelektrik.com Technical Data... Specifications...2 Model Number Structure - Relays...3 Model Number Selection...4 Dimensions... 5-6 Accessories...7
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. HIGH POWER CONNECTORS Panel Mounts and Cord Plugs HPC Series Switchcraft
Slim Relay G2RV. Features. Test switch operation. Protection cover: lock. Protection cover: unlock. Protection cover open. Protection cover close
Slim Relay GRV The only truly industrial 6 mm relay Lockable test switch models now available. Large plug-in terminals for reliable connection. LED indicator and mechanical flag for status indication.
4 mm. 8 mm. Proximity Sensor. Sensing head Sensing distance Output configuration Part Number M18 Shielded 4 mm DC 3-wire PNP-NO E2EZ-X4B1 M30
Sensing distance Supply voltage Output 4 mm 8 mm 12 to 24 VDC 100 to 220 VAC 200 ma max. 100 ma max. Proximity Sensor Detects Objects without Being Influenced by Aluminum and Cast Iron Cut Chips Sense
4 C/O. Contact material AgNi AgNi gold-plated Nominal contact current Inrush current
Quattro-Relais Quattro Relay 4 Quattro Relay 4A4 Standard type / With LED and protection diode on request Quattro-Relais Order Code Order Code Quattro Relay 4 A 4 4 V DC N Type of relay Quattro Relay 4
SRT2-ROC08, SRT2-ROC16
Ultra-miniature 8-point and 16-point Relaymounted Terminals Ultra-compact (8-point models: 101 x 51 x 51 mm (W x H x D); 16-point models: 156 x 51 x 51 mm (W x H x D)) MOS FET Relay and Relay models. DIN
WINSTA. Full Line Catalog 2008/2009
WINSTA Full Line Catalog 2008/2009 5 Contents FULL LINE CATALOG W4, Volume 1 Rail-Mounted Terminal Block Systems FULL LINE CATALOG W4 Rail-Mounted Terminal Blocks Volume 1 X-COM -SYSTEM Terminal Strips
- 1 - Product catalogue PCB connection systems PCB terminals Clamping yoke connection LM 5.00 / 5.08 LM 5.00/135
General ordering data Order No. 1715360000 Part designation LM5.00/3/135 OR Version EAN 4008190365240 Qty. 500 pc(s). PCB terminal, Clamping yoke connection, Soldered connection, Clamping range, max.:
TX1/TX2/TX3 SERIES CONNECTORS
TX 1 to 3 Series connectors are two-piece PC connectors with 1.27mm (.050") contact spacing. They are designed for board-to-cable applications. Configurations include IDC sockets (TX1 and TX2) for flat
SS Series Compatible Mounting with a Simple Construction and Easy-to-Use Design Concept
Subminiature Basic Switch SS Series Compatible Mounting with a Simple Construction and Easy-to-Use Design Concept One-piece terminal construction to keep out flux. A single leaf movable spring construction.
MODEL: R1M-A1. PC Recorders R1M Series. SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.)
PC Recorders R1M Series PC RECORDER (contact input, 32 points) Functions & Features Industrial recorder on PC 32-point dry contact inputs Easy system expansion via Modbus RTU Recorded data exportable to
60W Power over Ethernet Waterproof Adapter PoE IEEE BT Single Port Injector for Outdoor Application
WWW.PHIHONG.COM 60W Power over Ethernet Waterproof Adapter PoE IEEE BT Single Port Injector for Outdoor Application Features Compliant with the IEEE802.3bt Standard Non-Vented Case with Mounting Bracket
D2D. Door Interlock Switch. Ordering Information. Power Switch with Minimum Contact Gap of 3 mm. Model Number Legend.
Door Interlock Switch Power Switch with Minimum Contact Gap of 3 mm Offers the minimum contact gap of 3 mm required for power switches as standard equipment. Highly reliable design conforms to European
Operating voltages up to 40 kvdc Operating current up to 30 Amps Advanced contact technology Silver plated and gold plated contacts available High
Operating voltages up to 40 kvdc Operating current up to 30 Amps Advanced contact technology Silver plated and contacts available High performance insulation material General characteristics and technical
P7TF-IS16/OS16/OS08. I/O classification I/O points Internal I/O common Rated voltage Model 12 VDC P7TF-IS16 DC12 24 VDC P7TF-IS16 DC24 For inputs
I/O Terminal Socket PTF-IS/OS/OS CSM_PTF-IS_OS_OS_DS_E I/O Terminal Sockets to Flexibly Build Systems Mount either GT I/O Relays or GTA SSRs. Compact size for both Input and Output I/O Terminal Sockets:
Accessories Cassette Style Mating Connectors
Description All 19" cassette style converters are equipped with either H11, H15, H15S4, or H15S2 male connectors. Mating female connectors are available as accessories. The four H- type connector versions
Miniature Push-Pull Series Atto Miniature Push-Pull
J Miniature Push-Pull Series Atto Miniature Push-Pull Technical Data Panel connector Cable connector Coupler connector Panel connector, cable connector and coupler connector circular housing Locking Push-Pull,
RIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) A/L UNIV HDR 14P VERT AMP-LATCH Universal
Accessories Cassette Style Mating Connectors H11, H15, H15S2, H15S4
Description All 19" cassette style converters are equipped with either H11-, H15-, H15S4, or H15S2 male connectors. Mating female connectors are available as accessories. The four H-type connector versions
EXTreme Guardian Power Connector System
Exceed high-current and reliability requirements in topend server and high-power applications with Molex s compact,, providing EMI/RFI shielding, overmolding and discretewire options for design flexibility
Thermal-Magnetic Circuit Breaker 2216-S
Thermal-Magnetic Circuit Breaker 226-S Description One and two pole thermal-magnetic circuit breaker in compact design with slide actuator, trip-free mechanism, various trip characteristics and optional
7. Approved Standards US: UL, CSA UL: FILE No.E CSA: FILE No.LR31928) 8. Special Function None : Standard U : For ultrasonically cleanable
Subminiature, Sensitive SPDT Signal Switching Relay High sensitivity: 98-mW (Rated power consumption: mw) pickup coil power. Impulse withstand of 1,V ( 1 μs) meets FCC requirements. Stick packing employed
RACON short-travel keyswitches
General data short-travel keyswitches with sealed contact system and distinct key click, excellent switching reliability. For use under an overlay or with RK 90 keycaps. Print and SMD versions available
Combine Relays and P7TF Block Bases to match your application requirements. Use the table below to configure Relay Blocks.
9 Relay I/O Block Reduces Wiring within the Control Panel and Reduces Installation Time 1 Compact 16-pt models: 182 W l 85 D l 68 H mm; 8-pt block width is 102 mm 1 Can be connected to the PLC with a connecting
Data sheet. HDC insert HDC HQ 7 FC
The HQ series - big features in a compact design The electrical values speak for themselves. The standard HE crimp contacts can also be used here. The wire connection level is designed as a crimp contact
Overvoltage Protection
Overvoltage Protection Weidmuller has a complete line of overvoltage protection devices to effectively stop the harmful effects of electrical overvoltage and electrical noise. There is strong potential
LUMOTAST FK. General data. Content. Pushbuttons 1-9
General data TAST illuminated pushbutton range Illuminable pushbuttons and signal lamps with lamp socket T /T / 4. Please order lamps / LEDs separately. Mounting hole diameter 6.2 mm 42 V/00 ma max. Water-jet
Bulletin 700-SH Solid-State Relays. Overview/Product Selection. Bulletin 700-SH. Product Selection
Overview/Product Selection Bulletin 700-SH 40 A (resistive) Max. Continuous (Output) Current with Heat Sink 264V AC or 528V AC Max. Voltage Range Options 5 24V DC, 100 120V AC, 200 240V AC Control Input
G3NE. Ordering Information. Solid State Relay. Compact, Low-cost, SSR Switching 5to20A J ACCESSORIES (ORDER SEPARATELY) Solid State Relay G3NE
Solid State Relay G3NE Compact, Low-cost, SSR Switching 5to20A D Wide load voltage range: 75 to 264 VAC. D Dedicated, compact aluminum PCB and power elements used. D Built-in varistor effectively absorbs
G9SA. Ordering Information. Safety Relay Unit. The G9SA Series Offers a Complete Line of Compact Units. H Several types of 45-mm wide Units are
Safety Relay Unit The G9SA Series Offers a Complete Line of Compact Units H Several types of -mm wide Units are available: a -pole model, a -pole model, models with poles and OFF-delay poles H 7.-mm wide
Accessories Cassette Style Mating Connectors H11, H15, H15S2, H15S4
Description All 19" cassette type converters are equipped with either H11-, H15-, H15S4, or H15S2 male connectors. Mating female connectors are available as accessories according to the following tables.