Radiation Tolerant Analog I/O Module KM6782.1
|
|
- Amberly Todd
- 6 years ago
- Views:
Transcription
1 Radiation Tolerant Analog I/O Module KM MAIN FEATURES Power Consumption: 2W Voltage channels: 16 diff. signals Temperature Channels: 22 x AD590 & 6 PT1000 Onboard Calibration Dimensions: 160x100 mm 2 (Europe Card Size) Mass: 0.26 kg ITAR USML XV (e). APPLICATIONS Part of the payload supply system for small and medium satellites (data handling module) Instrument control computer (ICU) General purpose Analog I/O module for space. DESCRIPTION OHB System AG s radiation tolerant Analog I/O Module has been developed as a part of Payload Supply System (PSS) modular architectures for small and medium satellites. The Analog I/O Module consists of: Measurement of analog differential signals external and internal Excitation of the PT1000 and AD590 temperature sensors Measurement of analog differential HK signals of the PSS power modules and the appropriate signal conditioning Performance of self-calibration routines. Two 16-Bit ADCs are used on the analog module for redundancy. The measured analog data is available on two SPI busses on the connected CPU modules. The Analog I/O Module has been successfully operated as a part of the PSS of the TET-1 Satellite mission, launched in Top side of the Analog I/O Module RADIATION HARDENING PARAMETER MIN TYP MAX UNIT COMMENTS TID 5 Krad SEL 58,7 MeV-cm 2 /mg SEE 30 MeV- cm2/mg More information about radiation hardening features and radiation test conditions is available upon request. AVAILABLE OPTIONS PRODUCT PART COMPONENT FUNCTIONAL TEMP. NUMBER TEMP. RANGE RANGE Analog I/O Module EM KM6782.1A -25 C +85 C -20 C- +60 C Analog I/O Module FM KM6782.1B -55 C 125 C -20 C- +60 C ARQUIMEA DEUTSCHLAND GmbH 1
2 MAIN PARAMETERS Nº PARAMETER VALUE UNIT COMMENTS 1 Analog Differential Inputs 0 to 6 V Can be adjusted to other values 2 AD590 Temperature Inputs -20 to +50 C 3 PT1000 Temperature Inputs 0 to 120 C 4 HK-Voltage/Current Inputs 0 to 6 V 5 HK-Temperature Inputs -20 to +50 C 4 SPI Bus 1(speed)[nominal] 0.1 MHz 5 SPI Bus 2(speed)[redundant] 0.1 MHz 8 Calibration AD590 9 Calibration PT Calibration differential voltage C C V Can be adjusted to other temperature values Can be adjusted to other temperature values Channel switching and analog bus control (nominal) Channel switching and analog bus control (redundant) BLOCK DIAGRAM Analog I/O Module architecture Payload Supply System (PSS) architecture ARQUIMEA DEUTSCHLAND GmbH 2
3 APPLICATION NOTES OHB SYSTEM AG s Radiation Tolerant analog I/O Module has been successfully used in the on-orbitverification satellite TET-1. The TET-1 mission is a German program funded by the German Space Agency (DLR). The goal of the small satellite TET (120 kg mass and 880x670x580 mm 3 ) is support to the German industry and research institutes with the On-Orbit-Verification (OOV) of new innovative satellite technologies. In total, eleven payloads were accommodated on the satellite. TET-1 was launched in summer OHB SYSTEM AG was the prime contractor for the phase C/D. The TET-2 mission is already planned. Measurement and excitation of the PT1000 temperature sensors of the payloads and the appropriate signal conditioning. Measurement and excitation of the AD590 temperature sensors of the payloads and the appropriate signal conditioning. Measurement of analog differential HK signals of the PSS power modules and the appropriate signal conditioning. Multiplexing of the analog measurement signals, analog to digital conversion, and digital data transmission to the CPU upon request. Performance of self-calibration routines. The TET satellite consists of three basic elements: satellite bus, payloads, and payload supply system (PSS). The PSS separates the bus from the different payloads. The PSS is an advanced data and power system for small low earth orbit satellites. The Analog I/O module is part of the PSS architecture. The analog I/O module has the following functions: Measurement of analog differential signals of the payloads and the appropriate signal conditioning. The Analog I/O Module contains two 12-Bit ADconverter with SPI bus control for each converter for redundant use. The Analog I/O Module contains two multiplexers to interface to the HK-values of the DC/DC modules KM6788 and the power distribution modules KM6790 either on the primary and the secondary power side. The Analog I/O module contains also two times 5 HKtemperature inputs for housekeeping on the KM67xx family modules. Sensors used are the AD590 type. ARQUIMEA DEUTSCHLAND GmbH 3
4 ELECTRICAL CHARACTERISTICS PARAMETER Remarks MIN TYP MAX UNIT SPI Bus 1 nominal: * MHz Data SPI Clk SPI CS SPI SPI Bus 2 redundant: * MHz Data SPI Clk SPI CS SPI INPUTS *2) Analog Differential 0 to V Temperature AD590 0 to C HK Voltage/Current 0 to 7 priminary 0 6 V HK Voltage/Current 0 to 7 secondary 0 6 V HK Temperature AD590 0 to 4 primary C HK Temperature AD590 0 to 4 secondary C PT to C Calibration functions Analog Differential 50%value 3 V Analog Differential 0%value 0 V Temperature AD590 0 to 18 : 50 C 50 C Temperature AD590 0 to 18 : 0 C 0 C PT to 5 : 97 C 97 C PT to 5 : 0 C 0 C POWER SUPPLY Module Supply V Module Supply V TEMPERATURE RANGE Engineering Model * C Flight model * C *1) SPI Bus compatible with the CPU Module KM6792 and the other modules of the family KM67xx. *2) Standard levels; levels can be adapted to user defined values. *3) With industrial components and thermal performance test (OHB test procedure, available upon request) *4) Environmental tests according to ECSS: Shock/Vibration, Thermal Vacuum, EMC (procedures available upon request) RADIATION TEST PERFORMANCE The radiation performance is defined via a radiation analysis which is based on available test data of the radiation sensitive parts. The result on component basis is listed in the Declared Components List. ARQUIMEA DEUTSCHLAND GmbH 4
5 QUALITY STANDARDS OHB System AG develops its activities under the premises of quality and sustainability, offering efficient, liable and innovative technologies and solutions to its customers. OHB System AG is certified for development, production and distribution of systems for science, space transportation and industrial applications (ISO 9001:2008 DEKRA certificate No /5). In order to meet the highest quality and reliability, OHB System AG designs and develops its aerospace product line according to space standards. ABOUT OHB SYSTEM AG OHB SYSTEM AG is a medium-sized space company located in Munich and is system prime for complex scientific instruments, small satellites and space missions. We play a leading role in national and international space projects We create superior systems in optics, electronics, robotics and mechanics We transfer space technology into industrial applications. OHB System AG's technology solutions aim high and reach their mark. When it comes to space activities even several hundred thousands of kilometers. Developments originally made for space applications find their way back to earth and into applications in the railway sector which is also a focal point of OHB System AG's activities. OHB SYSTEM AG listed on the Prime Standard (ISIN: DE ). CONTACT (information and sales) ARQUIMEA DEUTSCHLAND GmbH Im Technologiepark 1 Raum 310, Frankfurt (Oder) DE Tel.: +49 (0) deutschland@arquimea.de ARQUIMEA DEUTSCHLAND GmbH 5
6 IMPORTANT NOTICE ARQUIMEA DEUTSCHLAND GmbH and its linked companies (hereinafter referred to as ARQUIMEA) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products or third parties licensed products at any time and to discontinue any product without notice. Customers must obtain the latest relevant information before placing orders and must verify that such information is current and complete. All products are sold subject to ARQUIMEA s terms and conditions of sale supplied at the time of order acknowledgment. ARQUIMEA warrants performance of its hardware products and third parties licensed products to the specifications applicable at the time of sale in accordance with ARQUIMEA s standard warranty. Testing and other quality control techniques are used to the extent ARQUIMEA deems necessary to support this warranty. Except where mandated by legal requirements, testing of all parameters of each product is not necessarily performed. ARQUIMEA assumes no liability for applications assistance or customer product design. Customers are responsible for their systems and applications using ARQUIMEA s products and third parties licensed products. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. ARQUIMEA does not warrant or represent that any license, either express or implied, is granted under any ARQUIMEA patent right, copyright, mask work right or other ARQUIMEA intellectual property right relating to any combination, machine or process in which ARQUIMEA products and third parties licensed products are used. Reproduction of ARQUIMEA information in ARQUIMEA data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. ARQUIMEA is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of ARQUIMEA products and third parties licensed products with statements different from or beyond the parameters stated by ARQUIMEA for that product or service voids all express and any implied warranties for the associated ARQUIMEA or third parties licensed product and is an unfair and deceptive business practice. ARQUIMEA is not responsible or liable for any such statements. ARQUIMEA products and third parties licensed products are not authorized for use in safety-critical applications (such as life support) where a failure of the product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of ARQUIMEA products or third parties licensed products in such safetycritical applications, notwithstanding any applications-related information or support that may be provided by ARQUIMEA. Further, Buyers must fully indemnify ARQUIMEA and its representatives against any damages arising out of the use of ARQUIMEA products and third parties licensed products in such safety-critical applications. Only products designated by ARQUIMEA as military-grade or space-grade meet military or space specifications. Buyers acknowledge and agree that any such use of ARQUIMEA products and third parties licensed products which ARQUIMEA has not designated as military-grade or space-grade is solely at the Buyer's risk and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. ARQUIMEA DEUTSCHLAND GmbH 6
Radiation Tolerant Digital I/O Module KM6784.1
Radiation Tolerant Digital I/O Module KM6784.1 MAIN FEATURES Power Consumption: 1W Digital I/O: Discrete signals SpaceWire: 3x UARTS with RS422: 6x Dimensions: 160x100 mm 2 (Europe Card Size) Mass: 0.32
More informationPower Supply DC/DC 1 KM6788
Power Supply DC/DC 1 MIN FETURES Power consumption: 0.7W (no load) Regulated output power (isolated) max. 3 voltages Primary power with LCL (2 lines) Current sources for D590 sensors Primary power path
More informationIndoTraq Development Kit 1: Command Reference
IndoTraq Development Kit 1: Command Reference April 2016 Page 1 of 9 Copyright 2016, IndoTraq LLC DK1 Command Reference v1.0 Contents 1 Introduction... 3 1.1 Writing Conventions... 3 2 Basics... 3 2.1
More informationStereo Dac Motherboard application information
Stereo Dac Motherboard application information 1 Introduction The "Stereo Dac Motherboard" is a high end solution to create a complete dac system. Just one board is needed to create a stereo system. Several
More informationHSKT TM Technology Specifications
HSKT TM Technology Specifications September 2018 Page 1 of 6 Copyright 2018, IndoTraq LLC Datasheet v1.3 HSKT This high-speed technology combines 12 axes of information into a tiny package to give a precise
More informationTLK10081 EVM Quick Start Guide Texas Instruments Communications Interface Products
TLK10081 EVM Quick Start Guide Texas Instruments Communications Interface Products 1 Board Overview +5 V Adapter Input Connector for voltage monitor board Connector for SMA break-out or FPGA board. Allows
More informationThe photograph below shows the PMP9730 Rev E prototype assembly. This circuit was built on a PMP9730 Rev D PCB.
1 Photos The photograph below shows the PMP9730 Rev E prototype assembly. This circuit was built on a PMP9730 Rev D PCB. 2 Standby Power No Load Pin AC (W) 120VAC/60Hz 0.187 230VAC/50Hz 0.238 Page 1 of
More informationSN65DSI86 SW Examples
Application Report December 30, 2013 SN65DSI86 SW Examples Mike Campbell CCI ABSTRACT The document contains examples of how to program the SN65DSI86 for different purposes. All examples in the document
More information1 Photo. 7/15/2014 PMP10283 Rev A Test Results
1 Photo The photographs below show the PMP10283 Rev A assembly. This circuit was built on a PMP10283 Rev A PCB. Top side: Bottom side: Page 1 of 17 2 Efficiency 120V AC /60Hz Vin(ac) Iin(A) Pin(W) PF Vo1(V)
More informationXIO1100 NAND-Tree Test
Application Report June 15, 2007 XIO1100 NAND-Tree Test Mike Campbell DIBU ABSTRACT Checking the interconnections between integrated circuits (IC) once they have been assembled on a PCB is important in
More informationDS25BR204 Evaluation Kit
3.125 Gbps 1:4 LVDS Buffer/Repeater with Transmit Pre-emphasis and Receive Equalization DS25BR204 Evaluation Kit USER MANUAL Part Number: DS25BR204EVK NOPB For the latest documents concerning these products
More informationAC Induction Motor (ACIM) Control Board
AC Induction Motor (ACIM) Control Board Ordering Information Order No. MDL-ACIM RDK-ACIM Description Stellaris ACIM Control Board Only Stellaris ACIM Control Board Reference Design Kit (includes MDL-ACIM
More informationApplication Report. 1 System Requirements. 2 Using the DM643x Pin Multiplexing Utility. Bernard Thompson...
Application Report SPRAAN3 July 2007 TMS320DM643x Pin Multiplexing Utility Bernard Thompson... ABSTRACT The DM643x devices use a great deal of internal pin multiplexing to allow the most functionality
More informationFeatures. Applications
DATASHEET epc635 Card Edge Connector Carrier 3D TOF imager epc635 160 x 60 pixel on mounting carrier General Description The epc635 Card Edge Connector Carrier is an easy-to-use board with an epc635 chip
More informationDSP/BIOS Link. Platform Guide Published on 20 th JUNE Copyright 2009 Texas Instruments Incorporated.
DSP/BIOS Link Platform Guide 1.63 Published on 20 th JUNE 2009 Copyright 2009 Texas Instruments Incorporated. 2 Platform Support Products Version 1.63 IMPORTANT NOTICE Texas Instruments Incorporated and
More informationStacking the REF50xx for High-Voltage References
Stacking the REF50xx for High-Voltage References Application Report Alexander Smolyakov and Mihail Gurevich ABSTRACT This application note describes the additional ways of using the REF50xx. The application
More informationWolverine - based microcontrollers. Slashing all MCU power consumption in half
Wolverine - based microcontrollers Slashing all MCU power consumption in half Wolverine: Industry s lowest power MCU platform Unique mixed signal ultra-low leakage process technology Enables variety of
More informationSingle Cell Battery Power Solution
Single Cell Battery Power Solution Input 5V DC Output 2.80.. 4.28V (dependent on charge state of battery) Current limited to 500mA max. Devices TPS2113A Autoswitching Power MUX TPD4S012 4-Channel USB ESD
More informationTIDA V Stepper Motor Controller with Integrated Current Sense Reference Design
Test Report TIDA-00867 November 2015 TIDA-00867 24V Stepper Motor Controller with Integrated Current Sense Reference Design Design Overview TIDA-00867 showcases the benefits of integrated current sensing
More informationSystem-on-Chip Battery Board User s Guide
System-on-Chip Battery Board User s Guide swru241 Table of Contents 1 Introduction...3 2 About this Manual...3 3 Acronyms and Definitions...3 4 Kit Contents...4 5 Hardware Description...5 5.1 LED, Button
More informationTest Report PMP Test Data For PMP /20/2015
Test Data For PMP10748 09/20/2015 1 09/20/2015 Table of Contents 1. Design Specifications... 2 2. Circuit Description... 3 3. Block Diagram... 4 4. Board Schematic... 5 5. PMP10748 Board Photos... 6 6.
More informationTIDA Test Report
Test Report October 2015 TIDA-00623 Test Report Jing Zou BMS/WLPC Abstract TI design TIDA-00623 wireless power supply transmitter is an application of the bq50002 and bq500511 devices in a 5W Qi compliant
More informationTIDA Test Report
Test Report January 2015 TIDA-00334 Test Report Bill Johns BMS/WLPC Abstract TI design TIDA-00334 wireless power supply transmitter is an application of the bq500212a IC in a small form factor design targeted
More informationdescription VCC 1PRE 1OC 1D1 1C 1Q1 1Q2 1Q3 1Q4 2Q1 2Q2 2Q3 2Q4 2C 2PRE 1D2 1D3 1D4 2D1 2D2 2D3 2D4 2OC GND 1PRE 1OC 1Q1 1D1 1Q2 1Q3 1Q4 1D2 1D3 1D4
3-tate Buffer-Type Outputs Drive Bus Lines Directly Bus-tructured Pinout AL873B is Alternative Version With Noninverting Outputs Package Optio Include Plastic mall Outline Packages, Both Plastic and Ceramic
More informationThe photographs below show the top and bottom view of the PMP11282Rev A board, which is built on PMP11064 Rev B PCB. Top Side
1 Photo The photographs below show the top and bottom view of the PMP11282Rev A board, which is built on PMP11064 Rev B PCB. Top Side Bottom Side Page 1 of 22 2 Efficiency The efficiency curves of total
More informationWL1271 ini File Description and Parameters User's Guide
WL1271 ini File Description and Parameters User's Guide Literature Number: SPRUGT8 January 2010 Contents Contents... 2 Revision History... 4 Reference Documents... 4 About This Document... 4 Chapter 1...
More informationCUSTOM GOOGLE SEARCH. User Guide. User Guide Page 1
User Guide User Guide Page 1 Important Notice reserves the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue
More informationIncrease Current Drive Using LVDS
Application Report SLLA100 May 2001 Increase Current Drive Using LVDS Steve Corrigan DSBU LVDS ABSTRACT The most common configuration for an LVDS connection is the one-way transmission topology. A single
More informationHands-On: Implementing an RF link with MSP430 and CC1100
Hands-On: Implementing an RF link with MSP430 and CC1100 Keith Quiring MSP430 Applications Engineer Texas Instruments 2006 Texas Instruments Inc, Slide 1 Overview Introduction Target Hardware Library File
More informationProtecting the TPS25810 from High Voltage DFPs
Application Report Nick Smith... Power Interface ABSTRACT The TPS25810 is a USB Type-C Downstream Facing Port (DFP) controller that monitors the Type-C Configuration Channel (CC) lines to determine when
More informationTCI6616/C6670/TCI6608/C6678 Device Simulator EMAC Model I/O user-guide
TCI6616/C6670/TCI6608/C6678 Device Simulator EMAC Model I/O user-guide IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements,
More informationThe examples in this application report require the Flash API Modules (SPRC236) within the "Tools & Software" folder.
Application Report SPNA093A February 2006 Revised December 2007 In-System Programming With Catalog TMS470 Devices John Mangino.. TMS470 Applications ABSTRACT This document gives two examples of reprogramming
More informationSystems ATE report. All output measurements are taken with 1uF and a 0.1uF MLCC across the DUT output.
Systems ATE report Substrate - Description PMP - BOM E deg ambient Test Notes CH = Vout CH = Vin AC CH = Iout Vout measurements taken with output cable All output measurements are taken with uf and a.uf
More informationez430-rf2480 Sensor Monitor SWRU Low-Power RF
s e r ' s G u i d e User's Guide ez430-rf2480 Sensor Monitor SWRU157 2008 Low-Power RF Contents EZ430-RF2480 SENSOR MONITOR...1 1. INTRODUCTION...2 2. INSTALLATION...3 3. DRIVER INSTALLATION...3 3.1.
More informationINVENTORY HISTORY REPORT EXTENSION. User Guide. User Guide Page 1
INVENTORY HISTORY REPORT EXTENSION User Guide User Guide Page 1 Important Notice JtechExtensions reserves the right to make corrections, modifications, enhancements, improvements, and other changes to
More informationBootstrap Loader (BSL) Scripter User s Guide
Bootstrap Loader (BSL) Scripter 3.0.1.0 User s Guide Copyright 2015 Texas Instruments Incorporated. 2 Copyright Copyright 2015 Texas Instruments Incorporated. All rights reserved. MSP430 and MSP432 are
More informationTMS320C6414T/15T/16T Power Consumption Summary
Application Report SPRAA45A February 2008 TMS320C6414T/15T/16T Power Consumption Summary Todd Hiers Matthew Webster C6000 Hardware Applications ABSTRACT This document discusses the power consumption of
More informationTFP101, TFP201, TFP401, TFP401A 2Pix/Clk Output Mode
Application Note SLLA137 March 2003 TFP101, TFP201, TFP401, TFP401A 2Pix/Clk Output Mode Digital Visual Interface ABSTRACT This document explains the recommended configuration to operate the TFP101/201/401(A)
More informationADD RELATED PRODUCTS TO CART. User Guide. User Guide Page 1
ADD RELATED PRODUCTS TO CART User Guide User Guide Page 1 Important Notice reserves the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services
More informationPMC to PCI Express Adapter with JN4 Connector Breakout
Innovative Integration Real time solutions! Mar 2009, Rev 1.1 PMC to PCI Express Adapter with JN4 Connector Breakout FEATURES Adapt one PMC to a PCI Express slot 4 lane PCI Express Host Interface PCI 64
More informationOctober 2002 PMP Portable Power SLVU074
User s Guide October 2002 PMP Portable Power SLVU074 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
More informationApplication Report. 1 Hardware Description. John Fahrenbruch... MSP430 Applications
Application Report SLAA309 June 2006 Low-Power Tilt Sensor Using the MSP430F2012 John Fahrenbruch... MSP430 Applications ABSTRACT The MSP430 family of low-power microcontrollers are ideal for low-power
More informationDebugging Shared Memory Systems
Application Report SPRA754 - May 2001 Debugging Shared Memory Systems Jeff Hunter Software Development Systems/Emulation Team ABSTRACT Multiple cores on a single processor often share a common block of
More information4-Level Strap Device Configuration
Application eport obert odrigues ABSTACT serves as a guide to configure Texas Instruments Ethernet PHYs that feature 4-level strap pins. 4-level straps require more consideration than simple 2-level straps.
More informationXMC Adapter for 3U cpci/pxi
PCI Express XMC to Compact PCI Adapter with PXI support; Air or Conduction Cooling V 1.3 FEATURES Adapt one XMC.3 (PCI Express VITA 42.3) module to a 3U compact PCI/PXI PCI/PCI-X 64 bit, 133MHz interface
More informationINVENTORY REPORT EXTENSION. User Guide. User Guide Page 1
INVENTORY REPORT EXTENSION User Guide User Guide Page 1 Important Notice JtechExtensions reserves the right to make corrections, modifications, enhancements, improvements, and other changes to its products
More informationFebruary 2003 PMP EVMs SLVU081
User s Guide February 2003 PMP EVMs SLVU081 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and
More informationMaximizing Endurance of MSC1210 Flash Memory
Application Report SBAA91 April 23 Maximizing Endurance of MSC121 Flash Memory Ramesh Saripalli saripalli_ramish@ti.com ABSTRACT Data Acquisition Products Microsystems The MSC121 embeds an 851 CPU, a high-performance,
More informationTPS62290EVM-279. User's Guide SLVU217 July 2007
User's Guide SLVU217 July 2007 TPS62290EVM-279 This user s guide describes the characteristics, operation, and use of the TPS62290EVM-279 evaluation module (EVM). This EVM demonstrates the Texas Instruments
More informationApplication Report. 1 Introduction. MSP430 Applications. Keith Quiring... ABSTRACT
Application Report SLAA325 July 2006 MSP430 Interface to CC1100/2500 Code Library Keith Quiring... MSP430 Applications ABSTRACT The MSP430 is an ideal microcontroller solution for low-cost, low-power wireless
More informationPMP11140 TPS40400 / CSD85301Q2 Test Report 12V to 1.8V 3A / 4A Texas Instruments
-Table of Contents: Comments & GUI settings page 1 Thermal images at 3A load w/o fan & at 4A load w/o & with fan page 2 Major switching waveform: Full load: 1 pulse and 10 cycles page 3 Ripple out at full
More informationPROGRAMMING THE MSC1210
Application Report SBAA076 - April 2002 PROGRAMMING THE MSC1210 By Russell Anderson SERIAL FLASH PROGRAMMING AUTOBAUD AND SETUP The BootROM start address is F800 H for User Application Mode (UAM), and
More informationTMS470R1x External Clock Prescale (ECP) Reference Guide
TMS470R1x External Clock Prescale (ECP) Reference Guide Literature Number: SPNU202B November 2004 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections,
More informationTechniques for Profiling on ROM-Based Applications
Application Report SPRA761 June 2001 Techniques for Profiling on ROM-Based Applications Harsh Sabikhi Code Composer Studio, Applications Engineering ABSTRACT This application report describes the methods
More informationThis document describes the features of the GUI program used to control Power Line Modem with E-Meter Platform.
Overview This document describes the features of the GUI program used to control Power Line Modem with E-Meter Platform. Program Startup The first time the program is run, three menus will be displayed
More informationPWM INTELLIGENT POWER HIGH SIDE SWITCH
July, 2nd 2010 Automotive grade PWM INTELLIGENT POWER HIGH SIDE SWITCH Features Integrated bootstrap for 100kHz switching Charge pump for DC operation Over temperature shutdown Over current shutdown 3.3V
More informationFMC-SFP+ FEATURES APPLICATIONS SOFTWARE. FMC Module with Four SFP+ Ports DESCRIPTION
V1.2 5/17/17 FMC Module with Four SFP+ Ports FEATURES Four SFP+ ports Up to 5 Gbps per port Programmable low jitter clock supports 0.16 to 350 MHz range with 1PPM step Spreadspectrum clock support 10 MHz,
More informationCOMMUNICATIONS WITH THE MULTI- CHANNEL HOST P RT INTERFACE
Multiple Channels COMMUNICATIONS WITH THE MULTI- CHANNEL HOST P RT INTERFACE With the HPI and McHPI, applications can create a single physical channel and multiple virtual channels to provide communications
More informationSavvyCube Ecommerce Analytics Connector by MageWorx. User Guide
SavvyCube Ecommerce Analytics Connector by MageWorx User Guide Getting started with SavvyCube A SavvyCube account is required in order to use this extension. You can sign up for an account here: https://appbeta.savvycube.com/account/register
More informationFMC-QSFP+ FEATURES APPLICATIONS SOFTWARE. FMC Module with Dual QSFP+ Ports DESCRIPTION
V1.1 2/12/17 FMC Module with Dual QSFP+ Ports FEATURES Two QSFP+ ports Up to 40 Gbps per port (IEEE 802.3ba) 2wire I2C communication interface and other lowspeed electrical interface compliant to SFF 8436
More informationTIDA DS125BR820 40GbE/10GbE QSFP Reference Design User s Guide
User s Guide May 2015 TIDA-00417 DS125BR820 40GbE/10GbE QSFP Reference Design User s Guide Version 2 May 2015 The information and/or drawings set forth in this document and all rights in and to inventions
More informationIMPORT/EXPORT Newsletter Subscribers. User Guide. User Guide Page 1
IMPORT/EXPORT Newsletter Subscribers User Guide User Guide Page 1 Important Notice reserves the right to make corrections, modifications, enhancements, improvements, and other changes to its products and
More informationNO P.O. BOXES ALLOWED AT CHECKOUT. User Guide. User Guide Page 1
NO P.O. BOXES ALLOWED AT CHECKOUT User Guide User Guide Page 1 Important Notice reserves the right to make corrections, modifications, enhancements, improvements, and other changes to its products and
More informationPCI Express XMC to PCI Express Adapter with J16 Connector Breakout DESCRIPTION
PCI Express XMC to PCI Express Adapter with J16 Connector Breakout FEATURES Adapt one XMC.3 (PCI Express VITA 42.3) module to a PCI Express slot PCI Express x1 lane interface Active signal equalization
More informationWM8805_6152_DS28_EV1_REV3 Schematic and Layout. WM8805_6152_DS28_EV1_REV3 Schematic and Layout. Customer Information 1 of 18 June 2007, Rev 3.
Customer Information 1 of 18 June 2007, Rev 3.1 Top Level Customer Information 2 of 18 June 2007, Rev 3.1 S/PDIF Inputs Customer Information 3 of 18 June 2007, Rev 3.1 WM8805 Customer Information 4 of
More informationTable 1. Proper Termination of Unused (Port) Pins in a Single-Port PSE System
Application Report SLVA231A June 2006 Revised November 2006 Proper Termination of Unused Port Connections Dale Wellborn... PMP Systems Power The TPS2384 quad integrated power sourcing equipment (PSE) power
More informationUser s Guide for Sonic MDIO Software
User's Guide This guide explains the usage of the TI Sonic MDIO Software to provide a means of communication with an MDIO compatible device. It communicates through the serial port of the host PC. The
More informationPassing CISPR25-Radiated Emissions Using TPS54160-Q1
Application Report Mahmoud Harmouch... MSA-ASI Todd Toporski... Analog FAE ABSTRACT This application report provides a summary of CISPR25-Radiated Emissions test results using the TPS54160-Q1 high-frequency
More informationHV Solar MPPT DC-DC GUI Overview. Getting Started Guide
HV Solar MPPT DC-DC GUI Overview Getting Started Guide Literature Number: TIDU403 September 2014 Contents 1 Getting Started... 5 2 Running the Application... 6 2.1 GUI Structure... 9 2.2 Using the GUI...
More informationDRV8833 Evaluation Module. User's Guide
DRV88 Evaluation Module User's Guide Literature Number: SLVU98 July 0 SLVU98 July 0 Copyright 0, Texas Instruments Incorporated Contents Introduction... Schematic... PCB... 6 Connectors... 7. Motor Outputs...
More informationWM CS20-M-REV2
DOC TYPE: BOARD REFERENCE: BOARD TYPE: WOLFSON DEVICE(S): SCHEMATIC AND LAYOUT WM8533-2011-CS20-M-REV2 Customer Mini Board WM8533 DATE: November 2011 DOC REVISION: Rev1.0 Customer Information 1 SCHEMATIC
More information18-Line SCSI Terminator (Reverse Disconnect) UCC5617 FEATURES DESCRIPTION BLOCK DIAGRAM
UCC5617 18-Line SCSI Terminator (Reverse Disconnect) FEATURES Complies with SCSI, SCSI-2, SCSI-3, SPI and FAST-20 Standards 2pF Channel Capacitance During Disconnect 50mA Supply Current in Disconnect Mode
More informationApplication Note AN045
AN045 Z-Tool By B.Selvig Keywords Z-Tool Z-Script CC2420DB CC2430DB SmartRF04EB ZigBee Introduction This application note describes the Z-Tool application, and how this tool can be used during development
More informationCalibration Routines and Register Value Generation for the ADS1216, ADS1217 and ADS1218
Application Report SBAA099 August 2003 Calibration Routines and Register Value Generation for the ADS1216, ADS1217 and ADS1218 Joseph Wu Data Acquisition Group ABSTRACT In order to achieve the best possible
More informationPACKAGE OPTION ADDENDUM
PACKAGE OPTION ADDENDUM www.ti.com 4-Jun-2007 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3) SN54LS375J
More informationWM DS28-EV1-REV2 Schematic and Layout WOLFSON DEVICE(S):
DOC TYPE: BOARD REFERENCE: BOARD TYPE: WOLFSON DEVICE(S): DATE: DOC REVISION: WM8716-6042-DS28-EV1-REV2 Customer Standalone WM8716 May 2008 Rev 1.0 Customer Information 1 SCHEMATIC Sheet 1: Top Level Customer
More informationUCD3138 Responding to Multiple PMBus Slave Addresses
Application Report SLUA758 October 2015 UCD3138 Responding to Multiple PMBus Slave Addresses Jack Tan, Ian Bower High Voltage Power Solution ABSTRACT The use of digital power controllers is becoming mainstream
More informationGUEST CHECKOUT TO REGISTERED CUSTOMERS. User Guide. User Guide Page 1
GUEST CHECKOUT TO REGISTERED CUSTOMERS User Guide User Guide Page 1 Important Notice reserves the right to make corrections, modifications, enhancements, improvements, and other changes to its products
More informationAntMiner S9 Installation Guide
AntMiner S9 Installation Guide Document Version 0.1 June 2016 Copyright Bitmain Technologies Ltd. 2007 2016. All rights reserved. Bitmain Technologies Ltd. (Bitmain) reserves the right to make corrections,
More informationPRODUCT DATASHEET. Features. IPNetCam Reference Design on DM365 Product Release 1.5.0, Nov 2009
Features Supports following Codec Combos: o Triple Stream Usecases: o H.264 HP 30fps 720p encode @1-6mbps + H.264 HP 15fps QVGA encode @128-512kbps + MJPEG 15fps VGA encode @Quality=3-95 + g711 encode
More informationSN54LS169B, SN54S169 SN74LS169B, SN74S169 SYNCHRONOUS 4-BIT UP/DOWN BINARY COUNTERS
SN54LS169B, SN54S169 SN74LS169B, SN74S169 SYNCHRONOUS 4-BIT UP/DOWN BINARY COUNTERS SDLS134 OCTOBER 1976 REVISED MARCH 1988 PRODUCTION DATA information is current as of publication date. Products conform
More informationEthernet-Enabled Intelligent Display Modules (IDMs)
Ethernet-Enabled Intelligent Display Modules (IDMs) Ordering Information Product No. MDL-IDM MDL-IDM-B MDL-IDM28 Description Display Module (with PoE) for Single-Unit Packaging Display Module (with PoE)
More informationEV Software Rev Evaluation System User Guide. Introduction. Contents. Hardware and Software Setup. Software Installation
Contents Evaluation System User Guide Software Rev 2.0.1 Introduction Section Page No. Introduction 1 Kit Contents 1 Hardware and Software Setup 1 Software Installation 1 Hardware Connection 1 Operation
More informationWM DS28-EV2-REV1 Schematic and Layout
DOC TYPE: BOARD REFERENCE: BOARD TYPE: WOLFSON DEVICE(S): SCHEMATIC AND LAYOUT WM8741-6060-DS28-EV2-REV1 Customer Standalone WM8741 DATE: October 2008 DOC REVISION: Rev 1.0 Customer Information 1 SCHEMATIC
More informationTMS320C64x DSP Peripheral Component Interconnect (PCI) Performance
Application Report SPRA965 October 2003 TMS320C64x DSP Peripheral Component Interconnect (PCI) Performance Stéphane Smith C6x Device Applications ABSTRACT This application report describes the number of
More informationWM DT16-EV1. Customer Standalone Board WOLFSON DEVICE(S): DATE: August 2009
DOC TYPE: BOARD REFERENCE: BOARD TYPE: WOLFSON DEVICE(S): WM8524-6228-DT16-EV1 Customer Standalone Board WM8524 DATE: August 2009 DOC REVISION: Rev 1.0 Customer Information 1 SCHEMATIC Sheet 1: Main Schematic
More informationA DSP/BIOS AIC23 Codec Device Driver for the TMS320C5510 DSK
Application Report SPRA856A June 2003 A DSP/BIOS AIC23 Codec Device for the TMS320C5510 DSK ABSTRACT Software Development Systems This document describes the implementation of a DSP/BIOS device driver
More informationPARAMETER MIN TYP MAX UNIT COMMENTS TID krad SEL MeV cm 2 /mg SEE performance Err/Bit/day For a GEO orbit (TBC)
ARQ-LVD001 RAD-HARD 500 Mbps Bus LVDS Quad Driver FEATURES 500.0 Mbps low jitter data path 3.3 V power supply Low Power Consumption 24 ma output driver short circuit (OUT+, OUT ) Cold sparing on all pins
More informationGUEST CHECKOUT TO REGISTERED CUSTOMERS
GUEST CHECKOUT TO REGISTERED CUSTOMERS FOR MAGENTO 2 User Guide User Guide Page 1 Important Notice reserves the right to make corrections, modifications, enhancements, improvements, and other changes to
More informationTMS320VC5409A Digital Signal Processor Silicon Errata
TMS320VC5409A Digital Signal Processor Silicon Errata June 2001 Revised May 2003 Copyright 2003, Texas Instruments Incorporated Literature Number REVISION HISTORY This revision history highlights the technical
More informationWM DT20-EV1. Customer Standalone Board WOLFSON DEVICE(S): DATE: September 2009
DOC TYPE: BOARD REFERENCE: BOARD TYPE: WOLFSON DEVICE(S): SCHEMATIC AND LAYOUT WM8523-6228-DT20-EV1 Customer Standalone Board WM8523 DATE: September 2009 DOC REVISION: Rev 1.0 Customer Information 1 SCHEMATIC
More informationAntMiner L3+ Installation Guide
AntMiner L3+ Installation Guide Document Version 0.1 April 2017 Copyright Bitmain Technologies Ltd. 2017 2027. All rights reserved. Bitmain Technologies Ltd. (Bitmain) reserves the right to make corrections,
More informationGetting Started with Evaluation Board EVB001
GreenArrays AN004 Getting Started with Eval Board EVB001 Application Note AN004 Revised 10/08/11 Getting Started with Evaluation Board EVB001 The GreenArrays EVB001 Evaluation Board is a versatile and
More informationTMS320UC5409/TMS320VC5409 Digital Signal Processors Silicon Errata
TMS320UC5409/TMS320VC5409 Digital Signal Processors Silicon Errata January 2000 Revised October 2001 Copyright 2001, Texas Instruments Incorporated Contents 1 Introduction........................................................................................
More informationSN5476, SN54LS76A SN7476, SN74LS76A DUAL J-K FLIP-FLOPS WITH PRESET AND CLEAR
SN5476, SN54LS76A SN7476, SN74LS76A DUAL J-K FLIP-FLOPS WITH PRESET AND CLEAR SDLS121 DECEMBER 1983 REVISED MARCH 1988 PRODUCTION DATA information is current as of publication date. Products conform to
More informationA DSP/BIOS AIC23 Codec Device Driver for the TMS320C6416 DSK
Application Report SPRA909A June 2003 A DSP/BIOS AIC23 Codec Device for the TMS320C6416 DSK ABSTRACT Software Development Systems This document describes the usage and design of a device driver for the
More informationUCC3917 Floating Hot Swap Power Manager Evaluation Board
User s Guide SLUU03 - June 00 UCC397 Floating Hot Swap Power Manager Evaluation Board Power Distribution & Power Supply Contents Introduction.........................................................................
More informationUsing the TMS320C5509 USB Bootloader
Application Report SPRA840 - October 2002 Using the TMS320C5509 USB Bootloader Mathew George, Jr. (Joe) Clay Turner ABSTRACT C5000 DSP Applications Boot loading the TMS320VC5509 digital signal processor
More informationAntMiner T9 Installation Guide
AntMiner T9 Installation Guide Document Version 0.1 Jan 2017 Copyright Bitmain Technologies Ltd. 2007 2016. All rights reserved. Bitmain Technologies Ltd. (Bitmain) reserves the right to make corrections,
More informationDesign Considerations for Avoiding Timing Errors during High-Speed ADC, High-Speed ADC, LVDS Data Interface with FPGA
Application Report Design Considerations for Avoiding Timing Errors during High-Speed ADC, Purnachandar Poshala... High Speed DC ABSTRACT This application note describes the design considerations for designing
More information