microsd Card Connectors

Size: px
Start display at page:

Download "microsd Card Connectors"

Transcription

1 NEW microsd Card Connectors DM Series Features Common to the entire Series. Extremely small size Small external dimensions and the above-the-board height make the connectors the smallest on the market.. Reverse card insertion protection Unique card slot design (patent pending) protects the connector from damage when the card is attempted to be inserted in reverse, allowing it to re-inserted correctly.. Effective ground and shield configuration 4-connection points of the metal cover to the printed circuit board assures secure connection of the ground circuit and provides EMI protection. 4. Rigid and strong construction Despite its small size, high-strengths materials used in the connectors produced a strong and rigid structure. 5. Card detection switch The card detection switch is Normally Open 6. RoHS compliant All components and materials comply with the requirements of the EU Directive 00/95/EC DMAT and DMB (Push - Push, with ejection mechanism) Card fall-out prevention Built-in card tray and the unique push insertion-push ejection mechanism (patent pending) prevent accidental card ejection or fall-out. Despite its small size the connectors will eject the card to a distance of 4.0 mm, allowing easy hold and removal of the card. Exposed termination leads Easy inspection and rework of the solder termination joints. DMC (Hinge, Push-Pull, manual, without ejection mechanism) Simple and reliable card insertion Hinged metal cover provides location and guides the card during the insertion / removal. Closing of the cover confirms the electrical and mechanical connection with a tactile click sensation. Reliable contact with the card contact pads Unique contact design and card slide action will clean the contact areas of the card. Accessible termination areas Contact solder terminations may be inspected and reworked. DMD (Push -Pull, manual, without ejection mechanism) Partial card insertion hold Card will not fall-out even when it is not fully inserted. Full insertion and electrical / mechanical connection is confirmed with a distinct tactile feel. Accessible termination areas An inner lead system that can be reworked is used in this design. Contact solder terminations may be inspected and reworked. Applications Mobile phone terminals, digital cameras, PDA's, miniature information terminals and any other portable device requiring use of small size high reliability microsd memory card connectors. etc. Card insertion-ejection Push-Push Hinge-manual insertion/ ejection Push-Pull manual insertion/ ejection Series Image Page DMAT DMB DMC DMD ~4 5~7 8~0 ~ 008.

2 DM Series microsd Card Connectors Specifications(DM Series) Ratings Current rating: 0.5A Voltage rating: 5V AC Operating temperature range: -5ç to +85ç (Note ) Storage temperature range : -40ç to +85ç (Note ) Operating humidity range: RH 95% max. (No condensation) Item Specification Conditions. Insulation resistance. Withstanding voltage. Contact resistance 000 Mø min. (Initial value) No flashover or insulation breakdown 00mø max. (Initial value) Measure at 500 V DC 500 V AC / minute ma 4. Vibration 5. Humidity 6. Temperature cycle 7. Durability No electrical discontinuity of 00 ns or longer No damage, cracks or parts dislocation. Contact resistance: 40 mø max. (change from initial value) Insulation resistance: 00 Mø min. No damage, cracks or parts dislocation. Contact resistance: 40 mø max. (change from initial value) Insulation resistance: 00 Mø min. No damage, cracks or parts dislocation. Contact resistance: 40 mø max. (change from initial value) Frequency: 0 to 55 Hz, single amplitude of 0.75 mm, directions for hours 96 hours at of 40 ± ç, and humidity of 90 to 95% -55ç 5 to 5ç 85ç 5 to 5ç Times: 0 min. 5 min. 0 min. 5 min. 5 cycles 0,000 cycles, 400 to 600 cycles per hour (DMAT, DMB) 5,000 cycles, 400 to 600 cycles per hour (DMC, DMD) 8. Resistance to soldering heat No deformation of components affecting performance. Note : Includes temperature rise caused by current flow. Note. The term "storage" refers to products stored for long period prior to mounting and use. Materials and Finishes DMAT, DMB Part Material Finish Insulator LCP Reflow : At the recommended temperature profile Manual soldering : 50ç for seconds Color: Black Remarks UL94V-0 Contacts Copper alloy Contact area: Gold plated Lead area: Gold plated Guide cover Stainless steel (DMAT) Copper alloy (DMB) Lead area: Gold plated Other components Stainless steel Piano wire Nickel plated DMC, DMD Part Material Finish Insulator LCP Color: Black Remarks UL94V-0 Contacts Copper alloy Contact area: Gold plated Lead area: Gold plated Guide cover Stainless steel Tin plated Ordering information DM AT SF PEJ 4 Series name: DM Connector type : AT Push-Push (ejection mechanism), Top board mounting (Standard) B Push-Push (ejection mechanism), Bottom board mounting (Reverse) C Hinge, Push-Pull (no ejection mechanism), Top board mounting (Standard) D Push-Pull (no ejection mechanism), Top board mounting (Standard) Number of contacts : 8 4 Termination type : SF Right-angle SMT(Standard) DSF Right-angle SMT(Reverse) Card ejection code : PEJ (Push insert/push eject) None : Manual card insertion/ejection

3 DM Series microsd Card Connectors DMAT Push-Push (ejection mechanism), Top board mounting (Standard) #6(VSS) #7(DAT0) #8(DAT) #5(CLK) #4(VDD) #(CMD) #(CD/DAT) #(DAT).85 ( 7.5) (. ).68 Part number CL No. RoHS DMAT-SF-PEJ YES 5.95 ( 5 ) 5.95 (6.75): Card pushed-in for ejection (7:55): Card fully inserted (.55): Card ejected Outline of the microsd card ( 5.5) LC ( ) ( 0.8).9±0.5 Recommended PCB mounting pattern 0MIN 9.5 MAX MIN MIN 5.7MAX MIN P=. 8.9 MIN 8.MIN 0.5MIN. 4.4MAX 6 MIN 4.MAX Note C L indicates the center line of the microsd card slot. Card detection switch Without the card Open Card inserted Closed MAX.9 (A) (B) (A) (B).8 LC 9. (. ).7.5 C 0.5. No conductive traces. Example of applications DMAT-SF-PEJ Portable device

4 DM Series microsd Card Connectors Packaging Specifications Embossed carrier tape dimensions (,500 pieces per reel).75 Ø.5 P=4 0 (. ) 8.4 ( 6.5) 4. Reel Dimensions End section Mounting section Lead section (400mm min.).4 Ø80 Ø80 (60mm min.) (00mm min.) Embossed carrier tape Top cover tape 4

5 DM Series microsd Card Connectors DMB, Push-Push (ejection mechanism), Bottom board mounting (Reverse) #4(VDD) #(CMO) #(CO/DAT) #(DAT) #5(CLK) #6(VSS) #7(DAT0) #8(DAT).8.85 (6.5) 0.4 Part number CL No. RoHS DMB-DSF-PEJ YES (.55): Card ejected (7:55): Card fully inserted (6.75): Card pushed-in for ejection (5) (0.55) Outline of the microsd card () (5.5) Recommended PCB mounting pattern 0MIN 9.5MAX ±0.05 P= MIN MIN 9.7. Note C L indicates the center line of the microsd card slot. Card detection switch Without the card Open Card inserted Closed C (A) (B) (A) (B) (.) No conductive traces. Example of applications DMB-DSF-PEJ Portable device 5

6 DM Series microsd Card Connectors Packaging Specifications Embossed carrier tape dimensions (,00pieces per reel) Ø.5 P=4 0 (.75).4 End section Mounting section Lead section (400mm min.) Ø80 Ø (6.5) Reel Dimensions (60mm min.) Embossed carrier tape (00mm min.) Top cover tape 6

7 DM Series microsd Card Connectors DMC, Hinge, Push -Pull (no ejection mechanism), Top board mounting (Standard).8 ( 6.9) ( 0.).8 ( 5.45 ):Card fully inserted Part number CL No. RoHS Outline of the microsd card ( 5.5) C L ( ) ( 0.9) (.78) DMC-SF YES #8(DAT) #7(DAT0) #6(VSS) #5(CLK) #(DAT) #(CD/DAT) #(CMD) #4(VDD) Recommended PCB mounting pattern.9 7.8MAX 5.4MIN.6.9MAX (.8 ) 8.5MIN 0.55MIN MIN 9.5MAX 4.MIN.5MAX MAX.4.9 ( 4. ) 4.4 Note C L indicates the center line of the microsd card slot. Card detection switch Without the card Card inserted Open Closed GND() GND() GND() GND() GND() GND() LC 0.7 P=. (.) GND(4) No conductive traces. GND(4) Example of Use applications DMC-SF (shown open for card insertion) DMC-SF (shown closed, with card inserted) Portable device 7

8 DM Series microsd Card Connectors Packaging Specifications Embossed carrier tape dimensions (,00pieces per reel).75 Ø.5 P=4 0 (.4 ).4 End section Mounting section Lead section (400mm min.) Ø80 Ø Reel Dimensions (60mm min.) Embossed carrier tape (00mm min.) Top cover tape 8

9 DM Series microsd Card Connectors DMD, Push-Pull (no ejection mechanism), Top board mounting (Standard) ( 6 ) ( 5.8 ):Card fully inserted ( 5) Part number CL No. RoHS DMD-SF YES ( 0.7) Outline of the microsd card, fully inserted ( 4.5) C L ( 5.5) ( ) #8(DAT) #7(DAT0) #6(VSS) #5(CLK) #(DAT) #(CD/DAT) #(CMD) #4(VDD) Recommended PCB mounting pattern 0.4MIN 8.MIN 5.05MIN.55MAX Note C L indicates the center line of the microsd card slot. 0.MIN MAX MIN 4MAX 0.8 ( 4.5 ) Card detection switch Without the card Open Card inserted Closed C L (A) (B) (A) (B) No conductive traces. Example of applications DMD-SF Portable device 9

10 DM Series microsd Card Connectors Packaging Specifications Embossed carrier tape dimensions (,000pieces per reel).5.75 Ø.5 P= End section (60mm min.) Mounting section Lead section (400mm min.) (00mm min.) Ø80 Ø80 (.85 ) 4.5 Reel Dimensions Embossed carrier tape Top cover tape 0

11 Recommended temperature profile DM Series microsd Card Connectors Temperature (ç) ç 0ç min. 00ç 90 to 0 seconds Preheating Time (Seconds) Peak:50ç MAX 50 seconds Soldering HRS test condition Solder method :Reflow, IR/hot air Environment :Room air Solder composition :Paste, 96.5%Sn/.0%Ag/0.5%Cu (Senju Metal Industry, Co., Ltd.'s Part Number:M705-GRN60-K-V) Test board :Glass epoxy 60mm 00mm.0mm thick Metal mask :0.mm thick The temperature profiles shown are based on the above conditions. In individual applications the actual temperature may vary, depending on solder paste type, volume / thickness and board size / thickness. Consult your solder paste and equipment manufacturer for specific recommendations. Precautions. Do not immerse or clean the entire connector with cleaning solutions as this may affect proper operation of the ejection mechanism and electrical performance of the connector. Do not apply excessive force to the connector when handling or after installation on the PC board.. The connectors will reliably connect and operate with the correctly inserted microsd TM cards. Follow the correct insertion / ejection procedure for the specific connector in use. Attempts of incorrect insertion of the card may cause damage to the connector or the card. 4. The connector must be correctly mounted on the PC board before the card can be inserted. Do not insert the card in the un-mounted connector. 5. Mounting on the Flexible Printed Circuit (FPC) To assure correct performance it is recommended that a flat reinforcement plate 0. mm min. thick be used under the FPC. 6. Small visible residual manufacturing fluids or tooling marks do not affect connector's performance. 7. Repeated insertions and removal of the cards may leave some marks on the card itself. This will have no affect on the connector performance.

microsd Card Connectors

microsd Card Connectors All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

microsd Card Connectors

microsd Card Connectors NEW microsd Card Connectors DM Series Features Common to the entire Series. Extremely small size Small external dimensions and the above-the-board height make the connectors the smallest on the market..

More information

microsd Card Connectors

microsd Card Connectors microsd Card Connectors DM Series Jan..08 Copyright 08 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features Common to the entire Series. Extremely small in size Small external dimensions and the above-the-board

More information

minisd TM Card Connectors

minisd TM Card Connectors All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

SD Memory Card Connectors

SD Memory Card Connectors SD Memory Card Connectors DM Series Withstands higher force of card insertion. Card Nov..6 Feb..8 Copyright 8 6 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features. Withstands higher force of card

More information

SD Memory Card Connectors

SD Memory Card Connectors SD Memory Card Connectors DM Series Withstands higher force of card insertion. Card Standard type Metal cover extends over the back of the connector. Features. Withstands higher force of card insertion

More information

0.4 mm Pitch, Space-saving Interface Connectors

0.4 mm Pitch, Space-saving Interface Connectors All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at your Hirose sales representative. NEW Series Small size.

More information

0.4 mm Pitch, 1.5 mm Board-to-Board Connectors with Dual Shields

0.4 mm Pitch, 1.5 mm Board-to-Board Connectors with Dual Shields All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

0.4 mm Contact Pitch 1.5 mm above the board Board-to-Board /Board-to-FPC Connectors

0.4 mm Contact Pitch 1.5 mm above the board Board-to-Board /Board-to-FPC Connectors All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

Interface Connectors for Miniature, Portable Terminal Devices

Interface Connectors for Miniature, Portable Terminal Devices All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

Memory Stick Connectors

Memory Stick Connectors Memory Stick Connectors CB1 Series Card Push Insert/Push Eject Card ejection distance of 1 mm Mounting height of mm Mounting area: Smaller design is 78% of former size Outline Receptacle

More information

0.5 mm Pitch, 6.18 mm Height, Vertical Mount, Shielded FFC High Speed Connectors

0.5 mm Pitch, 6.18 mm Height, Vertical Mount, Shielded FFC High Speed Connectors 0.5 mm Pitch, 6.18 mm Height, Vertical Mount, Shielded FFC High Speed Connectors FH48 Series Supports the next generation chip V-by-One HS* by THine *High speed serial interface technology for picture

More information

0.4 mm Contact Pitch Board-to-Board /Board-to-FPC Connectors

0.4 mm Contact Pitch Board-to-Board /Board-to-FPC Connectors .4 mm Contact Pitch Board-to-Board /Board-to-FPC Connectors DF4 Series Decrease in the board-occupied area Smaller width Other HRS connector DF4 3.38mm 5.mm Features 1. Higher density of the board-mounted

More information

Mini-B Connectors, SMT mount receptacles meeting requirements of USB 2.0 Standard

Mini-B Connectors, SMT mount receptacles meeting requirements of USB 2.0 Standard NEW Mini-B Connectors, SMT mount receptacles meeting requirements of USB 2.0 Standard UX60S Series Meets requirements of USB 2.0 Standard USB 2.0 certified Features. USB 2.0 Standard data transmission

More information

0.5mm Pitch Low-Profile Board-to-Board/Board-to-FPC Connectors

0.5mm Pitch Low-Profile Board-to-Board/Board-to-FPC Connectors NEW.5mm Pitch Low-Profile Board-to-Board/Board-to-FPC Connectors DF23 Series Low profile - 1.5 mm board-to-board distance Board-to-Board Application Plug Board Receptacle Plug Board FPC -.1 1.5 +.2 -.1

More information

SIM Card Sockets. ID1 Series. Features. Applications

SIM Card Sockets. ID1 Series. Features. Applications SIM Card Sockets ID1 Series Miniature and Thin Photograph (1) Features 1. Suited for Plug-in SIM Cards of the GSM Standard (11.11) In Europe, SIM card Subscriber Identity Modules are used for subscriber

More information

Interface Connectors for Portable Terminal Devices

Interface Connectors for Portable Terminal Devices Interface Connectors for Portable Terminal Devices ST Series Overview The ST Series interface connectors are specifically designed for use as Input/Output (I/O) connectors on portable information devices.

More information

Interface Connectors for Portable Terminal Devices

Interface Connectors for Portable Terminal Devices Interface Connectors for Portable Terminal Devices ST Series Strong locking mechanism Right Mating axial direction Jan..0 Copyright 0 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Overview The ST Series

More information

0.4 mm Contact Pitch, Board-to-FPC Connectors

0.4 mm Contact Pitch, Board-to-FPC Connectors .4 mm Contact Pitch, Board-to-FPC Connectors BM14 Series Mating Cross-Section Diagram (H =.8 mm type) Molded structure Two-point contact system Nov.1.217 Copyright 217 HIROSE ELECTRIC CO., LTD. All Rights

More information

PC Card Single Slot SMT Connectors for the AV Market (that Support 5 V Cards)

PC Card Single Slot SMT Connectors for the AV Market (that Support 5 V Cards) PC Card Single Slot SMT Connectors for the V Market (that Support 5 V Cards) IC15 Series Reliable card ejection 2-point card ejection Card ejection distance 6mm min Equipment outline Stroke: 11.7mm Ejection

More information

High Density FPC Connector (0.3mm/0.4mm/0.5mm Pitch)

High Density FPC Connector (0.3mm/0.4mm/0.5mm Pitch) High Density FPC Connector (0.3mm/0.4mm/0.5mm Pitch) FH16 Series FH16 Series Variation 0.3mm pitch 60 contact 0.3mm pitch 80 contact 0.3mm pitch 90 contact 0.4mm pitch 80 contact 0.5mm pitch 50 contact

More information

Interface Connectors for Portable Terminal Devices

Interface Connectors for Portable Terminal Devices Interface Connectors for Portable Terminal Devices ST Series Strong locking mechanism Right Mating axial direction Overview The ST Series interface connectors are specifically designed for use as Input/Output

More information

0.5 mm Pitch, 1.2 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors

0.5 mm Pitch, 1.2 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

USB 2.0 Standard Connectors

USB 2.0 Standard Connectors USB 2.0 Standard Connectors UX Series Meets requirements of USB 2.0 Standard USB 2.0 certified Features 1. Compatible to USB 2.0 Standard The UX series connectors are certified by a certification organization

More information

Compact Flash Card Connectors

Compact Flash Card Connectors Compact Flash Card Connectors Complies with Compact Flash Association MI2/2 Series (a)space-saving design 7. 5.75 Features. Compact design occupies minimum space Connectors are designed with small width

More information

0.8mm Pitch Stacking Height 5 to 9mm Connector

0.8mm Pitch Stacking Height 5 to 9mm Connector 0.8mm Pitch Stacking Height 5 to 9mm Connector FX6 Series Stacking Height: 5 to 9mm 5~9mm Features 1. Stacking Height 5 to 9mm The board to board stacking height can be set at every millimeter between

More information

USB 2.0 Standard Connectors

USB 2.0 Standard Connectors USB 2.0 Standard Connectors UX Series Meets requirements of USB 2.0 Standard USB 2.0 certified Features 1. Compatible to USB 2.0 Standard The UX series connectors are certified by a certification organization

More information

Meet requirements of USB 2.0

Meet requirements of USB 2.0 NEW Meet requirements of USB.0 UX Series Features 1. Certified to perform as required in USB.0 Standard Tested and certified by USB Association approved laboratory the connectors will perform at transmission

More information

1mm Pitch Double Rows Low Profile Wire-to-Board Connectors

1mm Pitch Double Rows Low Profile Wire-to-Board Connectors mm Pitch Double Rows Low Profile Wire-to-Board Connectors DF series Features. Contact Pitch mm contact pitch allows reliable solder and cable termination.. Reliable electrical connection wipe Effective

More information

0.4 mm Pitch, Horizontal Mating, Board-to-Micro-Coaxial Cable Connector

0.4 mm Pitch, Horizontal Mating, Board-to-Micro-Coaxial Cable Connector 0.4 mm Pitch, Horizontal Mating, Board-to-Micro-Coaxial Cable Connector DF81 Series Enhanced shielding capability Grounding connection between plug connector and receptacle connector 30 contacts: 5 locations

More information

1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors

1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

onlinecomponents.com

onlinecomponents.com 0.9 For FPC FPC connectors (0.3mm pitch) Back lock Y3B Series New FEATURES 1. Slim and low profile design (Pitch: 0.3 mm) The use of a back lock mechanism enables a 3.15 mm (with lever) low profile design.

More information

1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors

1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

1.25mm Pitch Miniature Crimping Connector

1.25mm Pitch Miniature Crimping Connector 1.25mm Pitch Miniature Crimping Connector DF13 Series Type Mounting Type Mounting Height(h) Features 1. Miniature Size Designed in the low profile at mounting height 5.8mm. (SMT mounting straight type)

More information

Micro-Miniature Interface Connectors For Power Supply/Signaling

Micro-Miniature Interface Connectors For Power Supply/Signaling All non-rohs have been discontinued, or will be discontinued soon. Please check the status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. NEW

More information

0.5mm and 1mm Pitch, 2mm Height, FPC/FFC ZIF Connectors

0.5mm and 1mm Pitch, 2mm Height, FPC/FFC ZIF Connectors .5mm and mm Pitch, 2mm Height, FPC/FFC ZIF Connectors FH52 Series Secure actuator retention Metal fittings are designed to hold and stabilize the actuator May..27 Copyright 27 HIROSE ELECTRIC CO., LTD.

More information

FPC connectors (0.2mm pitch) Back lock

FPC connectors (0.2mm pitch) Back lock 0.9 AYF21 For FPC FPC connectors (0.2mm pitch) Back lock Y2B Series New FEATURES 1. Slim and low profile design (Pitch: 0.2 mm) 0.2 mm pitch back lock design and the slim body with a 3.15 mm depth (with

More information

Low-Profile, Ultraminiature Lightweight SMT Coaxial Connectors or 1.2 mm Mated Height

Low-Profile, Ultraminiature Lightweight SMT Coaxial Connectors or 1.2 mm Mated Height NEW Features Low-Profile, Ultraminiature Lightweight SMT Coaxial Connectors - 0.94 or 1. mm Mated Height X.FL Series 1. A Low mated height of 0.94 or 1. mm (maximum of 1.0 or 1.3 mm) When connected this

More information

0.2 mm Pitch, 1.2 mm Height, FPC Connector

0.2 mm Pitch, 1.2 mm Height, FPC Connector 0.2 mm Pitch,.2 mm Height, FPC Connector FH29 Series Easy mounting with double-sided lead design.2 mm height,.55 mm mounting depth.2mm.55mm Features. Space saving 0.2 mm pitch FPC connector Super thin,

More information

Low-Profile, Ultraminiature Lightweight SMT Coaxial Connectors or 1.2 mm Mated Height

Low-Profile, Ultraminiature Lightweight SMT Coaxial Connectors or 1.2 mm Mated Height NEW Low-Profile, Ultraminiature Lightweight SMT Coaxial Connectors - 0.94 or 1. mm Mated Height X.FL Series Connector mated condition 0.94 1.0MAX X.FL-LP-040 X.FL-LP-03 09 X.FL-LP P -068 1. 1.3MAX 0.89

More information

Single Slot SMT Connectors for Card-Bus Based PC Cards

Single Slot SMT Connectors for Card-Bus Based PC Cards Single Slot SMT onnectors for ard-us ased P ards I14 Series P ard Standard ompliant oard Space-Saving SMT Unit Guide Unit Secure board retention Features 1. Space-Saving design facilitates pattern routing

More information

Ultra-Small Surface Mount Coaxial Connectors mm Mated Height

Ultra-Small Surface Mount Coaxial Connectors mm Mated Height All non- products have been discontinued, or will be discontinued soon. the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative. NEW Ultra-Small

More information

2mm Pitch Miniature Connector for HDD

2mm Pitch Miniature Connector for HDD 2mm Pitch Miniature Connector for HDD A3E Series Product Specifications Rating type without polarizing guide type with polarizing guide Features 1. Variation in Number of Contacts This connector can be

More information

NARROW PITCH (0.4 mm) CONNECTORS F4S SERIES

NARROW PITCH (0.4 mm) CONNECTORS F4S SERIES NARROW-PITCH, THIN AN SLIM CONNECTOR FOR BOAR-TO-FPC CONNECTION FEATURES 1. Space-saving (3.6 mm widthwise) The required space is smaller than our F4 series (40-contact type): 27% smaller, 38% smaller

More information

2mm Pitch, Multi functional Connector System. (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short Pin)

2mm Pitch, Multi functional Connector System. (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short Pin) NEW 2mm Pitch, Multi functional Connector System. (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short Pin) DF59 Series Floating Structure in Three xial Directions (Board-to-Board Structure) X

More information

USB3.0 Micro-B Connector

USB3.0 Micro-B Connector USB3.0 Micro-B Connector ZX360 Series General The ZX360 Series is a Micro-USB connector that is compliant with the MicroUSB 3.0 specifications and supports up to 5Gbps high speed data transmission. As

More information

2mm Pitch Miniature Connector

2mm Pitch Miniature Connector mm Pitch Miniature Connector A A Series Product Specifications Rating Features 1. Miniature Type and High Density Mounting These connectors are designed in a miniature and light weight product, and mounted

More information

The 2.5 mm wide ultra-slim body contributes to further miniaturization and functionality enhancement of target equipment.

The 2.5 mm wide ultra-slim body contributes to further miniaturization and functionality enhancement of target equipment. Compliance with RoHS Directive The 2.5 mm wide ultra-slim body contributes to further miniaturization and functionality enhancement of target equipment. FEATURES 1. 2.5 mm wide ultra-slim two-piece connectors

More information

Modular Jack Connectors for High-Speed LAN Transmission

Modular Jack Connectors for High-Speed LAN Transmission Modular Jack Connectors for High-Speed LAN Transmission TM2R Series Built-in Optical Indicators Dec..207 Copyright 207 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features. Supports High-Speed LAN Transmission

More information

2mm Pitch Miniature Connector

2mm Pitch Miniature Connector All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

2mm Pitch Miniature Connector

2mm Pitch Miniature Connector All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

2mm Pitch Miniature Connector for HDD

2mm Pitch Miniature Connector for HDD 2mm Pitch Miniature Connector for HDD A3E Series type without polarizing guide type with polarizing guide Features 1. Variation in Number of Contacts This connector can be chosen according to applications,

More information

Modular Jack Connectors for High-Speed LAN Transmission

Modular Jack Connectors for High-Speed LAN Transmission Modular Jack Connectors for High-Speed LAN Transmission TM2R Series Built-in Optical Indicators Optical indicator LED Optical pipe Features. Supports High-Speed LAN Transmission Meets requirements of TIA/EIA-568-B

More information

0.6 mm Pitch, Docking Station Connectors

0.6 mm Pitch, Docking Station Connectors All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

onlinecomponents.com

onlinecomponents.com YF53 For FPC/FFC* FPC connectors (0.5mm pitch) Back lock / Series New Low profile and space saving body of 1.0 mm high and mm deep (3.70 mm including the lever) and can have a minimum of four and two contacts

More information

1.27mm Pitch Two-Piece Connectors

1.27mm Pitch Two-Piece Connectors 1.7mm Pitch Two-Piece Connectors HIF6 Series Connector in combination with the HIF6 series connection type HIF3B Series (MIL-C-833) HIF Series (Board direct mount type) Features 1. Product Variation The

More information

1.27mm Pitch Multi-function Two Piece Connector

1.27mm Pitch Multi-function Two Piece Connector 1.27mm Pitch Multi-function Two Piece Connector FX2 Series Stacking connection (Stack height: 12~16mm) 12mm~16mm Features 1. Various connection with various product line 2. Easy One-Touch Operation Stacking

More information

USB Type-C Connector. Overview. Features. CX Series. 1. Easy mating due to the reversible form factor

USB Type-C Connector. Overview. Features. CX Series. 1. Easy mating due to the reversible form factor USB Type-C Connector CX Series Overview Note: Please contact us for TID acquisition status of each product. The CX series connector conforms to the next-generation USB standard USB Type-C. It is expected

More information

0.6 mm Pitch, Docking Station Connectors

0.6 mm Pitch, Docking Station Connectors mm Pitch, Docking Station Connectors EX0 Series Features 1. Secure electrical and mechanical connection The signal contacts wipe of 1.5 mm and built-in selfalignment assures reliable connection between

More information

2mm Pitch Miniature Connector

2mm Pitch Miniature Connector mm Pitch Miniature Connector A A Series Features 1. Miniature Type and High Density Mounting These connectors are designed in a miniature and light weight product, and mounted in the high density. The

More information

1.27mm Pitch Multi-function Two Piece Connector

1.27mm Pitch Multi-function Two Piece Connector 1.27mm Pitch Multi-function Two Piece Connector FX2 Series Stacking connection (Stack height: 12~16mm) 12mm~16mm Horizontal Connection Vertical Connection 25mm Features 1. Various connection with various

More information

1.27mm Pitch Two-Piece Connector

1.27mm Pitch Two-Piece Connector All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

Modular Jack Connectors for High-Speed LAN Transmission

Modular Jack Connectors for High-Speed LAN Transmission NEW Modular Jack Connectors for High-Speed LAN Transmission TM2R Series Built-in Optical Indicators Optical indicator LED Optical pipe Features. Supports High-Speed LAN Transmission Meets requirements

More information

1.27mm Pitch Two-Piece Connector

1.27mm Pitch Two-Piece Connector 1.7mm Pitch Two-Piece Connector HIF6 Series Connector in combination with the HIF6 series connection type HIF3B Series (MIL-C-83503) HIF Series (Board direct mount type) HIF5 Series 1 (Card edge type)

More information

Ultra Small Surface Mount Coaxial Connectors 1.4mm Mated Height

Ultra Small Surface Mount Coaxial Connectors 1.4mm Mated Height NEW Ultra Small Surface Mount Coaxial Connectors 1.4mm Mated Height W.FL Series Further downsizing of FL series in response to the market needs. Occupied Mounting Area.0.0 Features 1. Mounting area of

More information

7.92 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)

7.92 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) NEW 7.9 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) DF Series Complete Locking Function Completely enclosed locking system Protection from shorts circuits

More information

Ultra Small Surface Mount Coaxial Connectors 1.4mm Mated Height

Ultra Small Surface Mount Coaxial Connectors 1.4mm Mated Height NEW Ultra Small Surface Mount Coaxial Connectors 1.4mm Mated Height W.FL Series Further downsizing of FL series in response to the market needs. Occupied Mounting Area.0.0 Features 1. Mounting area of

More information

2.54mm Pitch High Density Connector

2.54mm Pitch High Density Connector All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

SFP Single Port Multi-Port Ganged

SFP Single Port Multi-Port Ganged Single Port Multi-Port Ganged Amphenol s SFP connector series is a 20 position connector and cage combo for mounting to a host PCB with a metal cage enclosing the connector. These connectors are similar

More information

0.635mm Pitch S.O. DIMM Socket

0.635mm Pitch S.O. DIMM Socket 0.635mm Pitch S.O. DIMM Socket SX1 Series Variation in Mounting Height Low Profile Type (Mounting Height: 4.0mm) Standard Type (Mounting Height: 5.5mm) Features 1. 72pos. Small Outline DIMM Socket SX1

More information

2.2 mm Ultra-slim body with the inherited high reliability

2.2 mm Ultra-slim body with the inherited high reliability For board-to-fpc Narrow pitch connectors DVNCED Series 0.4mm pitch 2.2 mm Ultra-slim body with the inherited high reliability 2011.07 panasonic-electric-works.net/ac XE1/XE2 For board-to-fpc Narrow pitch

More information

For board-to-board. Narrow pitch connectors (0.5mm pitch)

For board-to-board. Narrow pitch connectors (0.5mm pitch) Discontinued Discontinued as as of of September September 30, 30, 013 013 For board-to-board Narrow pitch connectors (0.5mm pitch) P5KL Series 5.8mm 3.3mm Products are discontinued. FEATURES 1. Low profile

More information

2.54mm Pitch High Density Connector

2.54mm Pitch High Density Connector All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

2.54mm Pitch Board to Board Connector

2.54mm Pitch Board to Board Connector All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

13~17 A Compatible, Position Misalignment Absorption Type Power Supply Connector for PCB Connections

13~17 A Compatible, Position Misalignment Absorption Type Power Supply Connector for PCB Connections 13~17 A Compatible, Position Misalignment Absorption Type Power Supply Connector for PCB Connections FX3B Series Example of Connector Mounted Next to Another Connector FX18 Series (without position misalignment

More information

Automotive Camera Module RF Connector POK15 Series

Automotive Camera Module RF Connector POK15 Series Features 1. Superior locking mechanism Our exclusive locking method keeps the mating part in constant contact with the electric reference plane(top Touch), ensuring high contact stability and reliability.

More information

1.25mm Pitch Miniature Crimping Connector

1.25mm Pitch Miniature Crimping Connector 1.mm Pitch Miniature Crimping Connector DF1 Series Type Mounting Type Mounting Height Straight Type DIP SMT.mm.mm Right Angle Type DIP SMT.mm Features 1. Miniature Size Designed in the low profile at mounting

More information

0.3 mm pitch, 0.9 mm height, back flip type dual-sided FPC connector

0.3 mm pitch, 0.9 mm height, back flip type dual-sided FPC connector 0.3 mm pitch, 0.9 mm height, back flip type dual-sided FPC connector FH35C Series 3.2 mm in depth Features 1. 0.3 mm pitch, Dual-sided connector This connector utilizes both a top and bottom contact and

More information

Y3BC. Pitch 0.3 mm and double top and bottom contacts construction

Y3BC. Pitch 0.3 mm and double top and bottom contacts construction For FPC FPC/FFC connectors (0.3mm pitch) Back lock Y3BC Pitch 0.3 mm and double top and bottom contacts construction FEATURES 1. Double top and bottom contacts construction 2. Lever open/close operation

More information

Mini PCI Express Card Socket

Mini PCI Express Card Socket Mini PCI Express Card Socket Document No: Page: 1 of 4 1. Scope This specification covers the material and performance requirements for the Mini PCI Express Card Socket series. 2. Applicable documents

More information

Narrow pitch connectors (0.4mm pitch) Radiation noise reduced by multi-point ground and shield construction

Narrow pitch connectors (0.4mm pitch) Radiation noise reduced by multi-point ground and shield construction For board-to-board For board-to-fpc Narrow pitch connectors (0.4mm pitch) P4S Shield type Radiation noise reduced by multi-point ground and shield construction FEATURES 1. Radiation noise is reduced thanks

More information

Product Change Notice: Y5B/Y5BW Series FPC Connectors (0.5mm pitch) Back Lock

Product Change Notice: Y5B/Y5BW Series FPC Connectors (0.5mm pitch) Back Lock Product Change Notice: Y5B/Y5BW Series FPC Connectors (0.5mm pitch) Back Lock PEWA Ref # ACBD257 1.17.2014 About this Notice: Addition of a manufacturing plant. Effective Date: March 2014 Change Details:

More information

0.3mm Contact Pitch, 1.25mm above the board, Flexible Printed Circuit Connectors

0.3mm Contact Pitch, 1.25mm above the board, Flexible Printed Circuit Connectors 0.3mm Contact Pitch, 1.mm above the board, Flexible Printed Circuit Connectors FH 23 Series Staggered termination configuration. Only 1. mm above the board. Leadless type Completely enclosed bottom surface

More information

0.3mm Contact Pitch, 1.25mm above the board, Flexible Printed Circuit Connectors

0.3mm Contact Pitch, 1.25mm above the board, Flexible Printed Circuit Connectors 0.3mm Contact Pitch, 1.mm above the board, Flexible Printed Circuit Connectors FH 23 Series Staggered termination configuration. Only 1. mm above the board. Leadless type Completely enclosed bottom surface

More information

USB Type-C TM Connector DX07 Series Receptacle. 2 row SMT Hybrid

USB Type-C TM Connector DX07 Series Receptacle. 2 row SMT Hybrid COMPONENTS PRODUCT INFORMATION NEW USB Type-C TM Connector DX07 Series Receptacle CONNECTOR MB-0297-3 December 2015 RoHS Compliant 2 row SMT Hybrid On-board Type Mid-mount Type On-board Type Mid-mount

More information

For board-to-fpc. Narrow pitch connectors (0.35mm pitch)

For board-to-fpc. Narrow pitch connectors (0.35mm pitch) For board-to-fpc Narrow pitch connectors (0.35mm pitch) A35S Contributes to device miniaturization and advanced functionality with 2.5 mm width, 0.35 mm pitch and 0.8 mm mated height! FEATURES 1. 0.35

More information

For board-to-fpc. Narrow pitch connectors (0.4mm pitch)

For board-to-fpc. Narrow pitch connectors (0.4mm pitch) For board-to-fpc Narrow pitch connectors (0.4mm pitch) A4S Being 2.5 mm in width, it facilitates ever-increasing device miniaturization and advanced functionality! FEATURES 1. TOUGH CONTACT construction

More information

For board-to-fpc. Narrow Pitch Connectors (0.35mm pitch) Excellent contact reliability and mating in a super miniature size (width 1.

For board-to-fpc. Narrow Pitch Connectors (0.35mm pitch) Excellent contact reliability and mating in a super miniature size (width 1. For board-to-fpc Narrow Pitch Connectors (0.35mm pitch) S35 Excellent contact reliability and mating in a super miniature size (width 1.7 mm) FEATURES 1. Slim: width 1.7mm 2. Low profile construction:

More information

USB Type-C TM Connector DX07 Series Receptacle

USB Type-C TM Connector DX07 Series Receptacle COMPONENTS PRODUCT INFORMATION NEW USB Type-C TM Connector DX07 Series Receptacle CONNECTOR MB-0297-4 December 2016 RoHS Compliant 2 Row SMT Hybrid The DX07 Series are connectors compatible

More information

Ultra-small Rack/Panel Crimp Connectors

Ultra-small Rack/Panel Crimp Connectors All non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.

More information

0.4mm Contact Pitch, 1.5mm above the board, Board-to-Board / Board-to-FPC Connectors DF18 Series

0.4mm Contact Pitch, 1.5mm above the board, Board-to-Board / Board-to-FPC Connectors DF18 Series 0.4mm Contact Pitch, 1.5mm above the board, BoardtoBoard / BoardtoFPC Connectors F18 Series Low profile Boardtoboard distance of 1.5 mm FPC Stiffener 0.1 1.5 +0.2 Board FPC Stiffener 0.1 1.5 +0.2 Board

More information

40-Position BGA/LGA PCBeam Connector for Texas Instruments Series 310 DMD

40-Position BGA/LGA PCBeam Connector for Texas Instruments Series 310 DMD PCBeam Connector for 40-Position BGA/LGA PCBeam Connector for Texas Instruments Series 310 DMD Neoconix P/N: FBX0040CMFF6AU00 FEATURES High density 0.7424mm area-array pitch Low profile, 1.06mm mated height

More information

P4S. High reliability, space saving type, 1.5 to 3.0 mm mated height

P4S. High reliability, space saving type, 1.5 to 3.0 mm mated height For board-to-board For board-to-fpc Narrow pitch connectors (0.4mm pitch) P4S High reliability, space saving type, 1.5 to 3.0 mm mated height FEATURES 1. TOUGH CONTACT construction provides high resistance

More information

USB Type-C TM Connector DX07 Series Receptacle

USB Type-C TM Connector DX07 Series Receptacle COMPONENTS PRODUCT INFORMATION NEW USB Type-C TM Connector DX07 Series Receptacle CONNECTOR MB-0297-4 December 2016 RoHS Compliant 2 Row SMT Hybrid The DX07 Series are connectors compatible

More information

For FPC. FPC connectors (0.3mm pitch) Back lock. FEATURES 1. Slim (width: 3.15 mm, including the lever) and low profile design (height: 0.9 mm) 3.

For FPC. FPC connectors (0.3mm pitch) Back lock. FEATURES 1. Slim (width: 3.15 mm, including the lever) and low profile design (height: 0.9 mm) 3. 0.9 For FPC FPC connectors (0.3mm pitch) Back lock Y3B/Y3BW Y3B Y3BW RoHS compliant FEATURES 1. Slim (width: 3.15 mm, including the lever) and low profile design (height: 0.9 mm) 3.15 Unit: mm 2. Mechanical

More information

Narrow pitch connectors (0.4mm pitch)

Narrow pitch connectors (0.4mm pitch) For board-to-fpc Narrow pitch connectors (0.4mm pitch) A4S Series 2.5mm Socket 2.0mm Header FEATURES 1. 2.5 mm wide slim two-piece type connector Compact and slim structure contributes overall miniaturization

More information

XSLS SERIES. Ultra Fine Pitch (0.25mm), Ultra Low Profile (1.44mm) Connector for Micro Coaxial Cable (Stacking Type) KEL CORPORATION

XSLS SERIES. Ultra Fine Pitch (0.25mm), Ultra Low Profile (1.44mm) Connector for Micro Coaxial Cable (Stacking Type) KEL CORPORATION Ultra Fine Pitch (0.25mm), Ultra Low Profile (1.44mm) Connector for Micro Coaxial Cable (Stacking Type) XSLS SERIES KEL CORPORATION KEL CONNECTORS,INC KEL Taiwan Co., Ltd. KEL Shanghai Co.,Ltd. www.kel.jp

More information

For board-to-board. Narrow pitch connectors (0.5mm pitch)

For board-to-board. Narrow pitch connectors (0.5mm pitch) For board-to-board Narrow pitch connectors (0.5mm pitch) P5K/ P5K 5.8mm 5.4mm Socket Socket 4.6mm 5.0mm Header Header Note: The external appearance and PC board pattern differs between the P5K and. RoHS

More information

For board-to-fpc. High Current Connectors. 20 pins signal terminals used. With power terminal. 20 pins signal terminals can be reduced.

For board-to-fpc. High Current Connectors. 20 pins signal terminals used. With power terminal. 20 pins signal terminals can be reduced. For board-to-fpc High Current Connectors A35US With Power Terminal 4. Power terminal type means power line is ensured without having to use signal line. Contributes to space savings New Power terminals

More information

A35P ORDERING INFORMATION. Narrow pitch connectors (0.35mm pitch) RoHS compliant. Rated current

A35P ORDERING INFORMATION. Narrow pitch connectors (0.35mm pitch) RoHS compliant. Rated current High current type For board-to-fpc Narrow pitch connectors (0.35mm pitch) A35P Rated current Number of power contacts Max. 4 pins Max. 8 pins Rated current Power contact Signal contact Total 1.5 A/pin

More information