Make sure that the MUTE button on your phone is depressed during the voice explanations.
|
|
- Natalie Long
- 6 years ago
- Views:
Transcription
1 If you are having trouble logging in, please call Carrie Tanke at (805) ext 432. Make sure that the MUTE button on your phone is depressed during the voice explanations. 1
2 Input / Output Rectangular connectors Connector Series shown in this presentation: DX, DXM, 3200, 3500, ST, EXT, MQ172, UK, UX (USB-Mini-B), The BIG Question: What are Input / Output connectors? By definition, the connectors primary function is to send / receive data from/to two (or more) connected devices. In case of nationally standardized I/O connectors (USB, 1394, D-subminiature, RJ, ) the exact configuration, contact pin assignment or markings are well defined. In other cases, companies decide what will be I/O connector for their device. Typically I/O connector is thought as being mated/unmated by the end user, between the separate devices, connected by cables. 2
3 DX Series Overview: Rugged Cable-to-Board die cast metal shell connectors capable of reliable performance under harsh industrial applications. Can be easily terminated by a small- volume user, without complex tooling. 1.27mm (0.050 ) contact spacing (pitch) IDC discrete wire termination, AWG 28 and AWG 30 conductors Solder terminations will accept larger wire gages Complete EMI protection Variety of contact positions, mounting styles (including signal + coaxial contacts and 3-coax only versions) Two-piece die-cast plug shell (easily installed) Screw Lock and Mechanical Latch Lock Applications: Industrial machinery, survey and geological equipment, I/O for factory equipment, instrumentation. 3
4 DX Series Strain relief clamp inside the back-shell Metal two-piece back-shell easily installed with 2 screws Die-cast lock hold 4
5 DXM Overview: Similar to DX Series but lighter-weight plug. The back-shell is a single plastic piece.the cable must be threaded through it BEFORE terminating the conductors. Full EMC protection, stamped/formed internal metal shells Terminates with variety of cable/conductor sizes Solder and IDC terminations. Solder terminations will accept wider wire gage range Latch and screw lock (for 68,80,100,110 contacts) Mates with 3M s MDR Series or Tyco s Champ 050 Series Applications: Industrial, medical, portable accessories and other commercial applications Hirose will pay $50.00 to any distributor salesperson who secures design registration and customer purchase order for crossing a current 3M MDR series application to our DXM series. 5
6 DX*M Series Single piece plastic back-shell. Metal shields are inside. Strain relief clamp is part of the shield. Longer cable bend protection DXM will NOT mate with DX! 6
7 DX vs. DXM What are the differences? DX DXM Back shell type EMC protection Two-piece metal (clam shell) Metal shell itself Single piece, plastic Separate, inside the back shell Back shell custom color Small volume cable termination/ ease of disassembly Applications environment Chemical corrosion resistance (back shell) Signal + coaxial version 3x coaxial version No Easier Heavy duty Less Yes Yes Yes Little harder Medium duty Better No No 7
8 3200 Series Overview: Small plug/receptacle connectors terminating with AWG #28 conductors. Up to 5.4 mm cable diameter. Top lock release button allows close mounting side-by-side. Small size 0.8mm contact spacing (pitch), 2.9mm receptacle s height. Easy inspection and repair of soldered terminations. Side-by-side mounting. Unique contact configuration assures high reliability electrical and mechanical connection. Built-in internal cable strain relief. 8, 10, 12 and 16 contact positions Applications: Personal computers, notebooks, office automation equipment, portable readers, mobile devices, mobile communication equipment. 8
9 3200 Series Plug. Plastic housing, internal metal shields Receptacle Top lock release button Open for solder joint inspection or repair 9
10 Receptacles 3200 Series P-C Plugs 8 pos S* P-C 10 pos S* P-TO-C 12 pos. 3260B-12S* * Ground cover DIP contact length. 1= 0.5mm, 2=1.0mm, 3= 1.5mm, 4= 0.8mm, 5= 2.0mm 10
11 Very strong board retention No damage to connectors when incorrect insertion is attempted Secure cable retention (built-in strain relief) and bend protection Small size and lightweight EMI and ESD protected Simple assembly 3500 Series Overview: Small 10 or 16 contact connector designed for extreme high durability consumer applications. Will disengage when cable is pulled by accident. Conductor size AWG # 28 for IDC or solder for different AWG sizes. 20,000 mating cycles (insertion/withdrawals) Applications: Hand held devices, mobile communication, consumer small devices, office automation equipment, laboratory instruments, measuring instruments and readers. 11
12 5.9 mm max cable dia Series Receptacle Plug Very strong and secure board attachment! Screws optional Side lock releases SMT tab Through hole 12
13 3500 Series Plastic top cover ESD protection The inside story! Insulator body Metal case Metal shell EMI protection Built-in strain relief clamp Plastic bottom cover Built-in locks Built-in self alignment for all components Integral lock release buttons 13
14 3500 Series Plugs Standard built-in strain relief Horizontal PCB mount (cradle application) 10 pos. 16 pos. 3530A-10P-CV P-CV P-CV PZ Receptacles S S 24 position is being released 14
15 ST Series Overview: Large variety, high durability connector series designed for the consumer use. Very strong lock, 49N max. cable pull force. Cable plug can be with/without the shield. Vertical and horizontal plug versions are used for small device cradle applications. Receptacle is only 3 mm high. Plug is 7 mm thick Multiple polarization keys prevent incorrect insertion Standard and reverse horizontal mounting Typical cable diameter 4 mm (7 mm cable dia. version is also made) Shielded plug versions can transmit USB protocol Very strong board attachment and retention Applications: Personal Digital Assistant, Notebook computers, Cellular phones, Portable readers, Mobile recorders, Cradle mounted portable devices, Cameras 15
16 ST Series For cradle applications Receptacle Plug, cable terminated, fully shielded Plug, PCB mounted, vertical Receptacle Side release locks Plug, PCB mounted, horizontal Shield connection 16
17 ST Series What mates with what? 10 pos. ST40X-10S-CV RECEPTACLE ST40X (Shielded) ST40X-10S-CVR ST60-10P ST40-10S-CV PLUGS Top surface Standard (-CV) ST40 (Without shield) ST40-10S-CVR Top surface Reverse (-CVR) ST80X-10S Vertical cradle 17
18 ST Series What mates with what- continuation ST40X-18S-CV 18 pos. Cable clamp (4mm) ST40X (Shielded) ST40-18S-CVR Receptacles ST60-18P ST40-18S-CV ST60-18P/4 ST40 (Without shield) SX40-18S-CVR Plugs SX60X-18S ST60X (Horizontal cradle) ST80X (Vertical cradle) ST80X-18S 18
19 ST Series What mates with what- continuation SX40X-24S-CV1 24 pos. ST60-24P Ø 5.8mm cable SX40X-24S-CV ST40X-24S-CV Ø 4mm cable ST80X-24S Receptacles ST40-36S-CV Vertical cradle ST60-36P 36 pos. ST40-36S-CV Plugs Top-board mount Ø 7mm cable ST60-36PR PCB ST60X-36S No photo available Reverse board mount Horizontal cradle 19
20 EXT Series Overview: Highly reliability plug/receptacle signal only or signal + power versions. Designed for high speed transmission. Side lock release. Plug s cable exit can be straight or angle. Horizontal PCB mount receptacle. Side lock release Used in LVDS, IEEE1394, USB 2.0 and other high speed differential signal applications Chassis ground, connector and PCB are fully interconnected Twisted pair conductors or twin axial cable. Hot pluggable power connection Receptacle designed for large self alignment. 20
21 EXT Series Standard Reverse logo Plug interface views Customized cable exit directions The same back housing Separate back housing 65 pos. (59 signal + 6 power) 45pos. (39 signal + 6 power) 71 pos. (All signal) 51 pos. (All signal) 6 power contacts rated at 2A each Signal contact rated 0.5A 21
22 EXT Series And why is it good for high speed signals? Time to get a little more technical! Adjacent contact-to-contact distance Insulator Contact Differential Impedance 100Ω GND DATA2A DATA2B GND DATA1A DATA1B Recommended wiring arrangement for LVDS Impedance (Ω) Connector area Time (ps) Upper contact Bottom contact Less variation of electrical path by concentrating higher speed lines on connector center paths. 22
23 MQ 172 Series Overview: Small power/signal connectors designed for consumer use. SMT mount receptacle. Easily assembled plug. Will un-mate when the cable is accidentally pulled. High reliability tuning fork 2-point contact Power applications: 3A (3 contacts), 2A (4 contacts) Interference lock Very small size (receptacle is 3.9 mm high) Superior cable side-pull stability 4 contacts, shielded Audible and tactile mating/un-mating 3 contacts Polarized interfaces Applications: Personal computers, Instrumentation, Notebooks, Cameras, Readers, Toy connections, Phone. 23
24 MQ 172 Series RECEPTACLES PLUGS MQ172-3PA-CV 3 pos. MQ172-3PA Shown without cables MQ172X-4PA-CV 4 pos. MQ172X-4PA 24
25 UK Series Receptacle- UK60-3P8 Overview: Small connector used primarily as a DC power supply. Plug UK40-3S 26mm 3 contacts, shielded connector 3A current rating Sequential contact engagement One configuration replaces several voltage classifications (up to 18V DC) 6.8mm 4.5mm 8.5mm 6.8mm 8.8mm Applications: Mobile devices, notebooks, PDA s, charging transformers, toys, cameras, readers any device requiring power connector 25
26 UX Series This is a fully USB Certified Mini-B connector Meets all electrical, mechanical and environmental requirements of USB 2.0 Will mate with other certified Mini-B connectors HRS can supply complete cable assemblies ( one side Mini-B other side standard style or both sides Mini B), with both plugs overmolded. USB2.0 certified Receptacles supplied on tape-and -reel Standard A plug Receptacle Mini B plug Receptacle 26
27 UX Series Receptacles Plugs UX60-MB-5ST (With positioning post, Metal shield SMT) UX40-MB-5P (Applicable cable dia.: mm) (4.1 to 4.6mm dia. cables can be supplied) UX60A-MB-5ST (Without positioning post, Metal shield SMT) New addition. Not yet in HRS brochure! UX60-MB-5S8 (With positioning post, Metal shield DIP) Vertical PCB mount, through hole termination. Certification symbol on the top surface PCB For cradle applications UX60RA-MB-5ST (Reverse ) Without positioning post, Metal shield SMT) 27
28 UX Series 1. Where are they used? As you had already deducted, application can be in any device requiring Mini-USB B connections! 2. How do these cable assemblies look like? Mini B plug Standard A plug Mini B plug Mini B plug Cut. Each end can terminate with other type of HRS connector. 28
29 Carrie? What is HRS HRS Additional information? 1. HRS website ( Product catalog, sample request and part search, location of representatives and distributors, authorized cable assemblers, HRS offices, latest product additions. 2. Connector drawing request: 3. HRS Technical Support in Simi,CA Carrie Tanke x Catalog/brochures from Hirose Marketing Dep t 29
30 30
31 31
Hirose s Small Interface Connectors
ITS-P-03010Q-.1 (Page 1 of 18) Hirose s Small Interface Connectors ITS-P-03010Q-.1 (Page 2 of 18) Agenda 1. ST Series (10, 18, 24, 36 pos.) 2. MQ203 Series (Pad / compression type) 3. 3200 Series (8, 10,
More informationInterface Connectors for Miniature, Portable Terminal Devices
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationHirose Micro-USB Connectors and C07
Page 1 of 28 Hirose Micro-USB Connectors and C07 Page 2 of 28 What is Micro-USB? Several connector suppliers including Hirose submitted new connector designs to the USB meeting upon request from mobile
More informationInterface Connectors for Portable Terminal Devices
Interface Connectors for Portable Terminal Devices ST Series Overview The ST Series interface connectors are specifically designed for use as Input/Output (I/O) connectors on portable information devices.
More informationInterface Connectors for Portable Terminal Devices
Interface Connectors for Portable Terminal Devices ST Series Strong locking mechanism Right Mating axial direction Overview The ST Series interface connectors are specifically designed for use as Input/Output
More informationInterface Connectors for Portable Terminal Devices
Interface Connectors for Portable Terminal Devices ST Series Strong locking mechanism Right Mating axial direction Jan..0 Copyright 0 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Overview The ST Series
More informationMeet requirements of USB 2.0
NEW Meet requirements of USB.0 UX Series Features 1. Certified to perform as required in USB.0 Standard Tested and certified by USB Association approved laboratory the connectors will perform at transmission
More informationHirose Circular Connectors
Hirose Circular Connectors Types, Applications, Competition HRS WebEx training 6/22/2004 1 Why use Hirose Circular Connectors? Broad range of types and mounting styles Unique and user-friendly designs
More informationDX SERIES HIGH-DENSITY I/O CONNECTORS
General DX SERIES HIGH-DENSITY I/O CONNECTORS DX series high-density I/O connectors with bellow contacts are perfect for tomorrow's miniaturized electronic devices. This new 1.27mm (0.050'') interconnect
More informationUltra-Small Surface Mount Coaxial Connectors mm Mated Height
All non- products have been discontinued, or will be discontinued soon. the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative. NEW Ultra-Small
More informationITS-Z0344 Half Pitch Interface Connectors
All non- product have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
More informationUSB 2.0 Standard Connectors
USB 2.0 Standard Connectors UX Series Meets requirements of USB 2.0 Standard USB 2.0 certified Features 1. Compatible to USB 2.0 Standard The UX series connectors are certified by a certification organization
More informationUSB 2.0 Standard Connectors
USB 2.0 Standard Connectors UX Series Meets requirements of USB 2.0 Standard USB 2.0 certified Features 1. Compatible to USB 2.0 Standard The UX series connectors are certified by a certification organization
More information07. har-link Interface Connectors
. Interface Connectors The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
More information07. har-link Interface Connectors
. Interface Connectors The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
More information07. har-link INTERFACE CONNECTORS
. INTERFACE CONNECTORS The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
More informationMini-B Connectors, SMT mount receptacles meeting requirements of USB 2.0 Standard
NEW Mini-B Connectors, SMT mount receptacles meeting requirements of USB 2.0 Standard UX60S Series Meets requirements of USB 2.0 Standard USB 2.0 certified Features. USB 2.0 Standard data transmission
More informationUSB Type-C TM Connector DX07 Series Receptacle
COMPONENTS PRODUCT INFORMATION NEW USB Type-C TM Connector DX07 Series Receptacle CONNECTOR MB-0297-4 December 2016 RoHS Compliant 2 Row SMT Hybrid The DX07 Series are connectors compatible
More informationIntroduction. The information pages provide standard data common to all D-subminiature connectors. These include:
Connectors Information Introduction The D-subminiature is one of the most popular styles of connectors in the I/O category. It is used in computer, telecom, datacom, medical, and test instrumentation applications
More informationPanel-to-Wire / Board-to-Wire, Crimp and Solder Connection Lever Mating Type Rectangular Connector with EMI Countermeasure QE6 Series
COMPONENTS PRODUCT INFORMATION RoHS Compliant NEW Panel-to-Wire / Board-to-Wire, Crimp and Solder Connection Lever Mating Type Rectangular Connector with EMI Countermeasure QE6 Series CONNECTOR MB-0281-3
More informationIntroduction. Purpose. Introduction to JAE s HDMI Connector, DC* Series
Purpose Introduction Introduction to Objectives Application examples Main features General specifications Materials and finishes Content X pages Learning Time: X mins v1.0 1 JAE DC* Series HDMI Connector
More informationHANDYLINK APPLICATION SPECIFICATION
HANDYLINK I/O CONNECTORS 44828 SMT Receptacle 45560 SMT Cradle Connector Connector 45339 and 45593 Plug Connector Modules A1 HANDYLINK I/O CONNECTOR SYSTEM 2 of 26 Table of Contents Section Page Section
More informationEXTreme Guardian Power Connector System
Exceed high-current and reliability requirements in topend server and high-power applications with Molex s compact,, providing EMI/RFI shielding, overmolding and discretewire options for design flexibility
More information1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors
ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationSpring Loaded Contacts
Spring Loaded Contacts Spring Probes ATE Test Probes Slim probes for automated testing Harwin supply a variety of Spring Probes, suitable for use on manual test jigs and automatic test equipment (ATE)
More information1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors
ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationIDC for 50mil(1.27mm) Falt Cable with One-touch Locking Ejector System 50mil(1.27mm) PITCH 2 PIECE CONNECTOR 8822E SERIES C-41
IDC for mil(1.27mm) Falt Cable with One-touch Locking Ejector System mil(1.27mm) PITCH 2 PIECE CONNECTOR 8822E SERIES C-41 8822E/8830E/8831E SERIES 1.27mm PITCH 2 PIECE CONNECTOR / IDC FOR 1.27mm (mil)
More information0.6 mm Pitch, Docking Station Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More information0.4 mm Contact Pitch 1.5 mm above the board Board-to-Board /Board-to-FPC Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationMake sure that the MUTE button on your phone is depressed during the voice explanations.
Make sure that the MUTE button on your phone is depressed during the voice explanations. 1 2 Development of memory cards PCMCIA Type III Type I & II LARGER Compact Flash Smart Media Express Card34 Express
More informationUltra Small Surface Mount Coaxial Connectors 1.4mm Mated Height
NEW Ultra Small Surface Mount Coaxial Connectors 1.4mm Mated Height W.FL Series Further downsizing of FL series in response to the market needs. Occupied Mounting Area.0.0 Features 1. Mounting area of
More informationminisd TM Card Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationUltra Small Surface Mount Coaxial Connectors 1.4mm Mated Height
NEW Ultra Small Surface Mount Coaxial Connectors 1.4mm Mated Height W.FL Series Further downsizing of FL series in response to the market needs. Occupied Mounting Area.0.0 Features 1. Mounting area of
More informationModular Connectors 75
75 Plug/Jack Compliant to Enhanced Category 5 standards Connector type Size Series Name Page plug connectors compliant to enhanced category 5 standards 8 TM21P 77 jack connectors for high-speed LAN transmission
More information0.4 mm Pitch, Horizontal Mating, Board-to-Micro-Coaxial Cable Connector
0.4 mm Pitch, Horizontal Mating, Board-to-Micro-Coaxial Cable Connector DF81 Series Enhanced shielding capability Grounding connection between plug connector and receptacle connector 30 contacts: 5 locations
More information8Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Subminiature Series Connectors 109 (Continued) Introduction Product Facts Military qualified connectors conform to the latest amendments of MIL-DTL-24308 Industrial versions available
More information0.5mm pitch stroke conforming to USB2.0 Standard. DD2 Series. [Plug] [Receptacle] [Cradle]
COMPONENTS PRODUCT INFORMATION NEW 0.5mm pitch stroke conforming to USB2.0 Standard DD2 Series CONNECTOR MB-0112-3 July 2007 RoHS Compliant [Plug] [Receptacle] [Cradle] The DD2 series of connectors are
More information0.5mm pitch stroke connector conforming to USB2.0 Standard. DD1 Series. [Plug] [Receptacle] [Cradle]
COMPONENTS PRODUCT INFORMATION NEW 0.5mm pitch stroke connector conforming to USB2.0 Standard DD1 Series CONNECTOR MB-0111-4 July 2006 RoHS Compliant Angle type Tilted type [Plug] [Receptacle] [Cradle]
More informationINTERCONNECT SOLUTIONS
INTERCONNECT SOLUTIONS Products Overview Connect with Us... Experience Makes the Difference Who We Are We have been designing and manufacturing interconnect products for over 40 years. Today we supply
More informationBOARD/WIRE-TO-BOARD CONNECTORS MINITEK UNSHROUDED VERTICAL HEADERS
BOARD/WIRE-TO-BOARD CONNECTORS MINITEK UNSHROUDED VERTICAL HEADERS MINITEK UNSHROUDED VERTICAL HEADERS TECHNICAL INFORMATION MATERIALS Housing: High temperature, black thermoplastic Flammability rating:
More informationN Series Connectors Medium sized connector for high-voltage applications Suited for critical applications and environments Performance to 11 GHz (commercial) and 18 GHz (hi frequency) Intermateable with
More information0.4 mm Contact Pitch, Board-to-FPC Connectors
.4 mm Contact Pitch, Board-to-FPC Connectors BM14 Series Mating Cross-Section Diagram (H =.8 mm type) Molded structure Two-point contact system Nov.1.217 Copyright 217 HIROSE ELECTRIC CO., LTD. All Rights
More informationSYSTEM CONNECTORS FOR W-CDMA
SYSTEM CONNECTORS COMPLINT WITH EIJ RC-5238 (CONNECTOR FOR IMT-2000 MOBILE PHONES) SYSTEM CONNECTORS FOR W-CDM Receptacle Signal 10 contacts with coaxial, with charging terminals ( type) Plug Signal 10
More informationSOFIX - A fully shielded front IO solution. Product Presentation
- A fully shielded front IO solution Product Presentation Product Description SOFIX is a front IO interconnection system comprised of R/A headers and cable plugs, suitable for the distribution of power
More informationUSB Type-C TM Connector DX07 Series Receptacle
COMPONENTS PRODUCT INFORMATION NEW USB Type-C TM Connector DX07 Series Receptacle CONNECTOR MB-0297-4 December 2016 RoHS Compliant 2 Row SMT Hybrid The DX07 Series are connectors compatible
More informationAMP- LATCH* Universal
AMP- LATCH* Universal Application Specification Input/Output 114-7011 Pin Connectors 21 MAR 11 Rev C NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions
More information1.27mm Pitch Two-Piece Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationM20 and M22. (2.54mm and 2.00mm pitch)
M20 and M22 (2.54mm and 2.00mm pitch) M20 and M22 Connectors Great Design Flexibility Today s electronics and PCB designers are faced with many connector challenges, including applications with increased
More information0.5mm pitch stroke connector conforming to USB2.0 Standard CONNECTOR MB November DD1 Series. Reverse type.
COMPONENTS PRODUCT INFORMATION NEW 0.5mm pitch stroke connector conforming to USB2.0 Standard CONNECTOR November 2006 DD1 Series RoHS Compliant Reverse type Standard type Angle type Tilted type [Plug]
More information2mm Pitch Miniature Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More information7.92 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
NEW 7.9 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) DF Series Complete Locking Function Completely enclosed locking system Protection from shorts circuits
More informationCONEC Industrial Ethernet Circular Sealed RJ45 Connector System consists of a RJ45 Plug Kit, a Receptacle Kit and a Protective Cover Assembly.
Revised Sept-28-2009 Sealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System Instructions CONEC Industrial Ethernet Circular Sealed RJ45 Connector System consists of a RJ45 Plug Kit, a Kit
More informationMicro USB Connector Meets The Requirements of USB 2.0
NEW Micro USB Connector Meets The Requirements of USB 2.0 ZX Series Figure 1 Comparison of size Micro - Mini USB Form Factor of Receptacles i Overview The Hirose ZX series was proposed and accepted as
More information0.5 mm Pitch, 6.18 mm Height, Vertical Mount, Shielded FFC High Speed Connectors
0.5 mm Pitch, 6.18 mm Height, Vertical Mount, Shielded FFC High Speed Connectors FH48 Series Supports the next generation chip V-by-One HS* by THine *High speed serial interface technology for picture
More informationAutomotive Camera Module RF Connector POK15 Series
Features 1. Superior locking mechanism Our exclusive locking method keeps the mating part in constant contact with the electric reference plane(top Touch), ensuring high contact stability and reliability.
More informationQUICKIE SHROUDED HEADERS LOW PROFILE
BOARD/WIRE-TO-BOARD CONNECTORS QUICKIE SHROUDED HEADERS LOW PROFILE FEATURES & BENEFITS Recessed pins assure proper alignment and eliminate damage during mating End windows for latching with IDC receptacle
More information2mm Pitch Miniature Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationQuadrax Contacts, Connectors and Cables
Quadrax Contacts, Connectors and Cables Introduction 2 mm centerlines Designed per ARINC 600 - Supplement 14 Fits into keyed connector inserts for connectors such as: ARINC 404 & 600, General Purpose Rectangular
More informationHan-Brid. Contents Han-Brid Features Han-Brid Data interfaces Han-Brid Overview Han-Brid Cu
Contents Page Features... 19.02 Data interfaces... 19.03 Overview... 19.04 Cu... 19.06 F.O.... 19.08 Quintax 3 A... 19.10 RJ45 C... 19.12 USB / FireWire... 19.14 Han 4 A SC... 19.16 Hoods/Housings... 19.18
More informationWelcome to the Hirose product presentation for April 2007
Welcome to the Hirose product presentation for April 2007 We will be starting shortly Make sure that the MUTE button on your phone is engaged during the voice explanations. This cuts down on the background
More informationFCC17 Series FILTERED STACKED D-SUB CONNECTORS
FCC17 Series FILTERED STACKED D-SUB CONNECTORS Ordering Information Stacked D-Sub FCC17 2 BP BS 4 5 5 X FCC17 2 VERTICAL MOUNTING DIMENSION BETWEEN CONNECTORS 1 =.625" [15.88 mm] 2 =.750" [19.05 mm] BP
More informationAMP-TWIST* 6S Series SL Jack
Product Specification 108-93003 16/Mar/2011 Rev E AMP-TWIST* 6S Series SL Jack 1. SCOPE 1.1 Content This specification covers performance, tests and quality requirements for AMP NETCONNECT*, AMP- TWIST*
More informationSmall Circular Connector. JN1/JN2 Series. Cap
COMPONENTS PRODUCT INFORMATION RoHS Compliant NEW Small Circular Connector JN1/JN2 Series CONNECTOR MB-0054-10 June 2012 Angle Plug [JN1] [JN2] [JN1] [JN2] Straight Plug Cable Connecting Individual Plug
More information(MR) Miniature Rectangular Connectors (Continued)
Product Facts Housings positively lock to help prevent accidental disengagement Either cap or plug housing can be mounted in same rectangular panel cutout without additional hardware UL94V-0 housings Plug
More informationUSB Type-C Connector. Overview. Features. CX Series. 1. Easy mating due to the reversible form factor
USB Type-C Connector CX Series Overview Note: Please contact us for TID acquisition status of each product. The CX series connector conforms to the next-generation USB standard USB Type-C. It is expected
More informationFISCHER MINIMAX TM SERIES
TECHNICAL SPECIFICATIONS FISCHER TM SERIES Fischer Connectors SA All rights reserved Web version 1.0-03.2016 Changes without prior notice FISCHER TM SERIES KEY FEATURES The Fischer MiniMax Series increases
More informationCONNECTORS & RECEPTACLES
STRAIGHT CORD PLUG with Extended Barrel TYPE 12BL6M TYPICAL Male plug with ground key-rib. Nickel-plated diecast handle. Contact friction coupling. Flexible black strain relief. Heavy duty cable clamp.
More informationUSB Type-C TM Connector DX07 Series Vertical Plug
COMPONENTS PRODUCT INFORMATION NEW USB Type-C TM Connector DX07 Series Vertical Plug CONNECTOR MB-0332-1 July 2018 RoHS Compliant *Plug will be packaged with protective cap on. Protective Cap The DX07
More information0.4 mm Pitch, Space-saving Interface Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at your Hirose sales representative. NEW Series Small size.
More informationExtract from new. Device Connectivity catalogue. HARTING har-flex. People Power Partnership
Extract from new Device Connectivity catalogue HARTING har-flex People Power Partnership . har-flex CONNECTORS The continuous scalability by an even number of contacts, i.e. from 6 to 100, of the HARTING
More informationPRODUCT SPECIFCATION GS MINI-SAS HD External Cable to Board Connector System. 1 of 14 F. Roger Cheng TYPE NUMBER
1 of 14 F TABLE OF CONTENTS 1.0 OBJECTIVE... 3 2.0 SCOPE... 3 3.0 APPLICABLE DOCUMENTS... 3 3.1 FCI SPECIFICATIONS... 3 3.2 OTHER STANDARDS AND SPECIFICATIONS... 3 3.3 FCI PRODUCT QUALIFICATION TEST REPORTS...
More informationSYSTEM CONNECTORS ULTRA-LOW PROFILE TYPE (AXR3) I/O CONNECTORS FOR PORTABLE EQUIPMENT (AXR5)
System connector ultra low profile 18, 22 and 24 contacts I/O connectors for portable equipment 18, 22, 24 and 26 contacts 50 contacts FOR CELLULR PHONE; ULTR LOW PROFILE TYPE FOR PORTBLE EQUIPMENT (0.5mm
More informationConnectors. product catalog no. 26
Connectors product catalog no. 26 ept GmbH I Tel. +49 (0) 88 61 / 25 01 0 I Fax +49 (0) 88 61 / 55 07 I E-Mail sales@ept.de I www.ept.de Product Groups Overview Explanation of Symbols Termination Application
More information1mm Pitch Double Rows Low Profile Wire-to-Board Connectors
mm Pitch Double Rows Low Profile Wire-to-Board Connectors DF series Features. Contact Pitch mm contact pitch allows reliable solder and cable termination.. Reliable electrical connection wipe Effective
More informationTE CONNECTIVITY (TE) 09 POS HDF RCPT, MS, LEAD FREE. AMPLIMITE HDF for Flat Ribbon Cable. TE Internal Number:
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS IDC D-SUB CONNECTORS TE CONNECTIVITY (TE) 09 POS HDF RCPT, MS, LEAD FREE AMPLIMITE
More information0.6 mm Pitch, Docking Station Connectors
mm Pitch, Docking Station Connectors EX0 Series Features 1. Secure electrical and mechanical connection The signal contacts wipe of 1.5 mm and built-in selfalignment assures reliable connection between
More informationAutomotive Digital Camera Compatible Connector MX55 Series
COMPONENTS PRODUCT INFORMATION NEW Automotive Digital Camera Compatible Connector MX55 Series CONNECTOR MB-0305-1 October 2015 Historically automotive camera modules have utilized analog image data, mainly
More informationUSB3.0 Micro-B Connector
USB3.0 Micro-B Connector ZX360 Series General The ZX360 Series is a Micro-USB connector that is compliant with the MicroUSB 3.0 specifications and supports up to 5Gbps high speed data transmission. As
More information3M Interconnect Products. MDR Connector Selection Guide
3M Interconnect Products MDR Connector Selection Guide 3 High Speed MDR Cable Assemblies 3M Mini Delta Ribbon (MDR) High Speed Transmission System The 3M MDR High Speed Transmission System is a digital
More information0.4 mm Pitch, 1.5 mm Board-to-Board Connectors with Dual Shields
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationSUBCON 15 HD (High-density) D-Subminiature Connectors
SUBCON 15 HD (High-density) D-Subminiature Connectors Installation Instructions 1896_en_D SUBCON SUBCON 15 15 HD HD 1 5 6 10 11 15 15-position High-density D-subminiature Plug 5604602 SUBCON SUBCON 15
More informationRJF RB Ethernet connection system for harsh environment Industrial Ethernet
RJF RB Ethernet connection system for harsh environment Industrial Ethernet ROHS compliant RJFRB allows you to use an Ethernet Class D / Cat 5e and Class E / Cat 6 connection for 10 BaseT, 100 BaseTX or
More informationUSB Type-C TM Connector DX07 Series Receptacle. 2 row SMT Hybrid
COMPONENTS PRODUCT INFORMATION NEW USB Type-C TM Connector DX07 Series Receptacle CONNECTOR MB-0297-3 December 2015 RoHS Compliant 2 row SMT Hybrid On-board Type Mid-mount Type On-board Type Mid-mount
More informationES3 Series (WF2 Type) (culus Certified Product)
COMPONENTS PRODUCT INFORMATION NEW Board-to Cable Connector For LED Lighting Power Supply ES3 Series (WF2 Type) (culus Certified Product) CONNECTOR MB-0227-3 July 2012 RoHS Compliant Receptacle (ES3B002WF2)
More informationFine-Coax Wire Connector for Portable Devices. FI-JH Series
COMPONENTS PRODUCT INFORMATION NEW Fine-Coax Wire Connector for Portable Devices FI-JH CONNECTOR MB-0179-1 November 2007 RoHS Compliant In addition to incorporating new functions such as one
More informationUTS UTS. UTS provides a connection that performs faster, easier, safer and more reliable, it makes :
Company Profile UTS Contents Company profile... 2 Contents... 3 Description... 3 Overview TRIM TRIO... 4 Major features & benefits 5-9 Contact styles... 5 Rapid and secure locking system... 6 Rapid and
More informationDura-ConTM Hermetic Connectors
Dura-ConTM Hermetic Connectors Standard Connectors With High Performance Hermetic Seals Catalog cinch.com Cinch Dura-Con Hermetic Connectors offers a high performance hermetic seal designed into our standard
More informationMezzanine connectors
Mezzanine connectors MezzSelect : a new brand in the industry 2 MezzSelect : A wide range of mezzanine connectors; An easy to use product selector: Web based; Printed. Why the MezzSelect portfolio? 3 The
More informationProduct Specifications (for connectors), and (for headers), provides product performance requirements and test result information.
This specification covers the requirements for application of Universal MATE N LOK Housings, Contacts, and Printed Circuit (PC) Board Headers. The housings are available in 1 through 15 circuit versions
More informationFLAT FLEXIBLE CABLE (FFC) CONNECTORS
FLAT FLEXIBLE CABLE (FFC) CONNECTORS TE Connectivity s (TE) family of FFC connectors includes a variety of high density cable-to-board and cable-to-cable connectors designed for automated assembly. The
More informationRectangular Connectors
31 Subminiature Interface Type Series Name Page compliant to USB 2.0 standard Interface connectores for miniature, portable terminal devices Interface connectors for mobile phone 20,000 times of mating
More informationmicrosd Card Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More information2 PIECE BOARD-TO-BOARD
2 PIECE BOARD-TO-BOARD 201-01-123 1. SPECIFICATION DISTRIBUTION No restrictions for issue 2. SCOPE This specification contains the application notes for the 9159 two part connectors. 3. PRODUCTS 10-9159
More informationDistributed by: www.jameco.com -800-8-44 The content and copyrights of the attached material are the property of its owner. Pin and Socket Mini-Universal MTE-N-LOK Product Facts Compact, durable housings
More information6000 Series Buccaneer. 30 twist locking Tamperproof lock prevents accidental un-mating. Cat 5e shielded coupler Maintains shielding
circular connectors that combine the ease of use of a push/pull coupling mechanism with proven environmental sealing. Available with metal or plastic bodies, the range supports both data (USB and Ethernet),
More informationTNC SERIES Miniature Coaxial Connectors
SERIES Miniature Coaxial Connectors FEATURES connectors, medium sized coaxial connectors with thread coupling, are designed for applications where extreme vibration is encountered.the increased rigidity
More informationCatalog Snapshot.
Catalog Snapshot EMC Shielding Board Level Shielding EMC SHIELDING EMC shielding products improve PCB layouts by eliminating the need for soldering cans to the board. This wide range of products is suitable
More informationDT Connectors. Features. Connector
DT Connectors DEUTSCH DT Series connectors offer field proven reliability and rugged quality. The DT design strengths include optional flange mounting, multi-pin arrangements, lower cost, and design flexibility.
More informationMicro-Miniature Interface Connectors For Power Supply/Signaling
All non-rohs have been discontinued, or will be discontinued soon. Please check the status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. NEW
More informationMTC High-Performance Modular Rectangular Connectors with Removable Contacts
Introduction Product Facts Low-profile rectangular design for high packaging density Environmental sealing for aerospace applications Modular components for design versatility and logistics savings Lightweight
More information