SGS Smart Gate Sensors

Transcription

1 TECHNICAL DESCRIPTI SGS Smart Gate Sensors Modular. Flexible. Self-synchronising.

2 SGS Smart Gate Sensors from SICK: Offering impressive versatility The latest opto-electronic know-how from SICK for countless new application areas Thanks to innovative Slim and Flat construction, the sophisticated and easy-to-use Click and Go assembly concept and the straightforward teach-in setup, the fl exibility of the SICK light grid has been signifi cantly increased for new areas of application. Whether for lifts, automatic doors, picking shelves or conveyor belts, the SGS light grid from SICK is the easy-to-install and reliable solution for many tasks. Its small size and the Slim and Flat principle open up completely new application areas. The light grids can be integrated into your application either slim or flat. You choose! Slim + Flat

3 Click and Go assembly concept Multiconnector for easy interlinking of several light grids Interfaces compatible with PNP industry standards Monitoring length 600 mm 00 mm Max. range: 0 m Response time: < 0 ms Resolution: 0 mm and 80 mm Easy Teach-in setup Muting function Optical synchronisation SICK SGS SMART GATE SENSORS

4 SGS Smart Gate Sensors Operating range m/7 m Through-beam light grid 0 mm beam spacing Optical synchronization Ultra slim housing for area saving installation Easy commissioning Dimensional drawing sender mm x (Beam ) + 7. = Housing height M8 5 Last beam Beam spacing 0 mm Detection height, 6 beams First beam Connection: cable with plug M8, - and -pin Connections types All types All types Accessories Cables and connectors Mounting systems Receiver M8, -pin L+ Teach/ M Sender M8, -pin L+ Test M SGS SMART GATE SENSORS SICK

5 SGS Technical data SGS- S08 PPS W00 F08 PPS W00 S08 P7PS W00 F08 P7PS W00 S0 PPS W00 F0 PPS W00 S0 P7PS W00 F0 P7PS W00 Operating range 0... m m Beam spacing 0 mm Number of beams 8 6 Detection height 080 mm 00 mm Switching output ) PNP Switching mode ) Light-switching MDO ) /resolution 5 mm/5 mm Profile type Slim Flat Light source LED, infrared Synchronization Optical Voltage supply V ) S V DC ± 0 % Residual ripple < 0 % within V S tolerances Current consumption sender Typ. < 0 ma + 6 ma/beam Current consumption receiver Typ. < 65 ma Output current I A max. 00 ma Response time 5) parallel beam/ 0 ms/60 ms multiple scan Response time 5) coded version 0 ms/0 ms Parallel beam/multiple scan Initialisation period s Output load Capazitive load: 00 nf Inductive load: H EMC test CE High immunity to ambient light 50,000 lx (sun light) Connection type sender Plug, M8, -pin Connection type receiver Plug, M8, -pin VDE protection class Circuit protection 5) A, B, C Enclosure rating IP 65 Ambient temperature Operation 5 C C Storage 0 C C Mechanical resistance Vibration: 5 g/0-55/s IEC Shock: 0 g/6 ms IEC Weight 0 (5 g/beam) 80 (5 g/beam) Material Housing: PMMA Front lens: PMMA ) NPN on request ) =, when no light beam is interrupted ) Multiple scan/parallel beam ) Limit values 5) With resistive load 6) A = V S -connections reverse-polarity protected B = Outputs short-circuit protected C = Interference pulse suppression LED display Sender LED green, Power Receiver LED yellow, when no object Order information Type SGS-S08PPSW00* ) SGS-F08PPSW00* ) SGS-S08P7PSW00* ) SGS-F08P7PSW00* ) SGS-S0PPSW00* ) SGS-F0PPSW00* ) SGS-S0P7PSW00* ) SGS-F0P7PSW00* ) Order no * ) Not a safety component according to EU machine regulations SICK SGS SMART GATE SENSORS 5

6 SGS8 Smart Gate Sensors Operating range m/7 m Through-beam light grid 80 mm beam spacing Optical synchronization Ultra slim housing for area saving installation Easy commissioning Dimensional drawing sender mm x (Beam ) + 7. = Housing height M8 5 Last beam Beam spacing 80 mm Detection height, beams First beam Connection: cable with plug M8, - and -pin Connections types All types All types Accessories Cables and connectors Mounting systems Receiver M8, -pin L+ Teach/ M Sender M8, -pin L+ Test M 6 SGS SMART GATE SENSORS SICK

7 SGS Technical data SGS8- S0F 7PS WA S0F 7PC WA Operating range m Beam spacing 80 mm Number of beams Detection height 00 mm Switching output ) PNP Switching mode ) Light-switching MDO ) /resolution 5 mm/ 85 mm Profile type Slim Flat Light source LED, infrared Synchronization Optical Voltage supply V ) S V DC ± 0 % Residual ripple < 0 % within V S tolerances Current consumption sender Typ. < 0 ma + 6 ma/beam Current consumption receiver Typ. < 65 ma Output current I A max. 5) 00 ma Response time 6) parallel beam/ 0 ms/60 ms multiple scan Response time 6) coded version 0 ms/0 ms Parallel beam/multiple scan Initialisation period s Output load Capazitive load: 00 nf Inductive load: H EMC test CE High immunity to ambient light 50,000 lx (sun light) Connection type sender Plug, M8, -pin Connection type receiver Plug, M8, -pin VDE protection class Circuit protection 7) A, B, C Enclosure rating IP 65 Ambient temperature Operation 5 C C Storage 0 C C Mechanical resistance Vibration: 5 g/0-55/s IEC Shock: 0 g/6 ms IEC Weight 0 g (5 g/beam x ) Material Housing: PMMA Front lens: PMMA ) NPN on request ) =, when no light beam is interrupted ) Multiple scan/parallel beam ) Limit values 5) = 50 ma and = 50 ma 6) With resistive load 7) A = V S -connections reverse-polarity protected B = Outputs short-circuit protected C = Interference pulse suppression LED display Sender LED green, Power Receiver LED yellow, when no object Order information Type SGS8-S0F7PSWA* ) SGS8-S0F7PCWA* ) Order no * ) Not a safety component according to EU machine regulations SICK SGS SMART GATE SENSORS 7

8 Menu control for parametrising the SGS Smart Gate Sensors flow diagram -IN MODE C s... 5 s RUN mode Func > 5 s/> 0 s if keylock Func Optimum light reception After 0 s automatically in RUN mode Func Light reception not optimised Activate alignment aid and align sensors After 0 s automatically in RUN mode Func No light received Activate alignment aid and check light path After 0 s automatically in RUN mode Crossed beam < s Parallel beam s... 5 s s... 5 s s... 5 s Alignment aid < s Alignment aid in s... 5 s s... 5 s s... 5 s Switching output < s Switching output s... 5 s s... 5 s s... 5 s Menu item Multiple scan Parallel beam: This function allows the user to parametrise the device for multiple scan of the sensor beams or operation in parallel alignment. With multiple scan, the light grid has an MDO of 5 mm and, with parallel beam, of 5 mm. Menu item Automatic sensor alignment Manual sensor alignment: In this option, the user decides bet ween manual and automatic alignment of the sensors. For fi ne adjustment, activation of the automatic alignment is recommended. Traffi c light function, LED x green, yellow. Menu item Output on: n = if all beams are free. = if a beam is interrupted. 8 SGS SMART GATE SENSORS SICK

9 FIGURATI MODE Auto teach AUTO s... 5 s Keylock s... 5 s Standard values s... 5 s Switching output s... 5 s Muting MUTING > 5 s or after 0 s (if not saved) automatically in RUN mode s... 5 s < s s... 5 s < s s... 5 s < s s... 5 s < s s... 5 s < s Auto teach in AUTO s... 5 s Keylock in s... 5 s Standard values in s... 5 s Switching output s... 5 s Muting in MUTING s... 5 s Menu item Automatic Teach-in on Automatic Teach-in off: After operation, the light grid becomes Auto Teach-in. The Teach-in button is locked. Unlock: press after > 0 s. Menu item Factory settings on Factory settings off: With this function, all parameters can be reset to the factory settings. Menu item Output on Output off: n = if all beams are free. = if a beam is interrupted. Menu item Muting function on Muting function off: = If a beam is permanently interrupted, the light grid goes after 60 s. = remains in as long as the beam is interrupted. SICK SGS SMART GATE SENSORS 9

10 Accessories Dimensional drawings and order information Mounting systems Retaining clip Type Retaining clip VZA-SLG Pieces Order no Pieces Mounting bracket Type BEF-SLG Order no SGS SMART GATE SENSORS SICK

11 Accessories Dimensional drawings and order information Mounting systems Mounting bracket Type BEF-SLG Pieces Order no SICK SGS SMART GATE SENSORS

12 807/ GO/FD Printed in Germany (008-) Subject to change without notice The specified product features and technical data do not represent any guarantee 0 A c int Australia Phone tollfree sales@sick.com.au Belgium/Luxembourg Phone + (0) info@sick.be Brasil Phone sac@sick.com.br Ceská Republika Phone sick@sick.cz China Phone ghk@sick.com.hk Danmark Phone sick@sick.dk Deutschland Phone info@sick.de España Phone info@sick.es France Phone info@sick.fr Great Britain Phone + (0)77 8 info@sick.co.uk India Phone info@sick-india.com Israel Phone info@sick-sensors.com Italia Phone info@sick.it Japan Phone +8 (0) 58 support@sick.jp Nederlands Phone + (0) info@sick.nl Norge Phone austefjord@sick.no Österreich Phone + (0) office@sick.at Polska Phone info@sick.pl Republic of Korea Phone / kang@sickkorea.net Republika Slowenija Phone +86 (0) office@sick.si România Phone office@sick.ro Russia Phone info@sick-automation.ru Schweiz Phone contact@sick.ch Singapore Phone admin@sicksgp.com.sg Suomi Phone sick@sick.fi Sverige Phone info@sick.se Taiwan Phone sickgrc@ms6.hinet.net Türkiye Phone info@sick.com.tr USA/Canada/México Phone +(95) tollfree info@sickusa.com More representatives and agencies in all major industrial nations at SICK AG Waldkirch Germany