Online data sheet. MLG10N-0890P10501 MLG-2 ProNet MEASURING AUTOMATION LIGHT GRIDS

Transcription

1 Online data sheet MLG0N-0890P00 MLG- ProNet

2 MLG0N-0890P00 MLG- ProNet A B C D E F Ordering information Type Part no. MLG0N-0890P00 78 Other models and accessories Detailed technical data Features H I J K L M N O P Q R S T Version ProNet Technology Sender/receiver Minimum detectable object (MDO) 0 mm, mm ) ) ) Beam separation 0 mm Number of beams 90 Detection height 890 mm ) ) ) MDO min. detectable object at high measurement accuracy. MDO min. detectable object for standard measurement accuracy. Depending on beam separation without cross beam setting. Performance Maximum range 7 m ) Minimum range 0 mm Operating range m Response time 8. ms ) ) ) ) ) No reserve for environmental issue and deterioration of the diode. Without high speed. With resistive load. Interfaces Data interface PROFIBUS Communication interface PROFIBUS DP Mechanics/electronics Wave length 80 nm Supply voltage Vs DC 8 V... 0 V ) ) ) ) Without load., Without load with V. Operating in outdoor condition only with a external protection housing. Online data sheet ::7 Subject to change without notice

3 MLG0N-0890P00 MLG- ProNet Power consumption sender 9. ma ) Power consumption receiver 8 ma ) Ripple < Vpp Output current Imax. 00 ma Output load capacitive 00 nf Output load inductive H Initialization time <s Dimensions (W x H x D) mm x 97. mm x 0.6 mm Housing material Aluminum Indication LED Enclosure rating IP6, IP67 ) Circuit protection UV connections, reverse polarity protected, Output Q short-circuit protected, Interference pulse suppression Weight.07 kg Front screen PMMA Option Nonexistent ) ) ) Without load., Without load with V. Operating in outdoor condition only with a external protection housing. Ambient data Protection class III EMC EN Ambient operating temperature 0 C + C Ambient storage temperature 0 C +70 C Ambient light immunity Direct: 0,000 lx ) Indirect: 00,000 lx ) Vibration resistance Sinusoidal oscillation 0-0 Hz g Shock load Continuous shocks 0 g, 6 ms, 000 shocks Single shocks g, ms per axle UL File No. NRKH.E89 (Sensor) NRAQ.E8799 (Fieldbus module) ) ) Outdoor mode. Light resistance indirect. Classifications ECl@ss ECl@ss ECl@ss ECl@ss ECl@ss ECl@ss ECl@ss ECl@ss ::7 Online data sheet Subject to change without notice

4 MLG0N-0890P00 MLG- ProNet A B C D E F H I J K L M N O P Q R S T ETIM.0 EC009 ETIM 6.0 EC009 UNSPSC Online data sheet ::7 Subject to change without notice

5 MLG0N-0890P00 MLG- ProNet Dimensional drawing (Dimensions in mm (inch)) Receiver (.) Sender (.) (.) Sender (.) (0.9) B (0.9) Receiver 6. (.) 6 (8.0) 8. (.).6 (0.6) 9.7. (0.9) (0.9) (0.9) (0.9) (0.78) (0.) (.) 07 (8.) A. (0.0) 8. (.0) 0.6 (.0) 6. (.) 8. (.) 7.7 (0.70). (0.9) 0.6 (.60) Ø M (.) A ) B ) Beam separation. mm 6. (.) 7. (0.68) Beam separation mm 6. (.9) 6. (0.6) Beam separation 0 mm 68. (.69) 6. (0.6) Beam separation 0 mm 68. (.69)/78. (.08) ) 6. (0.6) Beam separation mm 8. (.8) 6. (0.6) Beam separation 0 mm 88. (.69) 6. (0.6) Beam separation 0 mm 08. (.6) 6. (0.6) ) ) ) ① ② ③ ④ ⑤ Ø M Distance: MLG- edge - first beam Distance: MLG- edge - last beam MLG0x-xx0: 68. mm MLG0x-xx80: 78. mm Detection height (see optical performance) Beam separation (RM) Status indicator: green, yellow, red LEDs Safty screw M; turning moment 0, Nm For thread bold M; turning moment 0, Nm ::7 Online data sheet Subject to change without notice

6 MLG0N-0890P00 MLG- ProNet Adjustments (0.9) red 7. H I J K L M N O P Q R S T grn 9 (.). (.) yel (.68) A B C D E F ① Status indicator: green, yellow, red LEDs Connection type and diagram PROFIBUS, CANopen brn wht blu blk gra Receiver DEVICE POWER brn Sync A wht - (M) blu Test in blk Sync B gra +(L+) Sender - (M) Q Sync B BUS IN +(L+) Sync A red blk wht blu BUS OUT Shield M CAN H CAN L red blk wht blu CONFIG Shield wht/ora wht/grn M CAN H ora grn Tx+ Rx+ Tx Rx CAN L Connection to fieldbus module Not connected 6 Online data sheet ::7 Subject to change without notice

7 MLG0N-0890P00 MLG- ProNet Connection type ProNet Ethernet 7 6 ① ② ③ ④ ⑤ ⑥ ⑦ Connection cable receiver (DSL-0-GxxMC) T-piece Connection cable (DOL-0-GxxM) Connection receiver DEVICE Connection cable POWER (DSL-0-GxxMC) Ethernet Connection cable BUS IN, BUS OUT Ethernet connection cable CONFIG ::7 Online data sheet Subject to change without notice 7

8 MLG0N-0890P00 MLG- ProNet H I J K L M N O P Q R S T Connection diagram Connection diagram T-junction T-Junction, -pin Fieldbus module I/O Test_In Test_In A B C D E F Recommended accessories Other models and accessories Brief description Type Part no. SBO-0G-SM 6090 Head A: female connector, M, -pin, straight Head B: open cable ends Cable: PVC, unshielded, m DOL-0-G0M Head A: female connector, M, -pin, straight, A-coded Head B: male connector, M, -pin, straight, A-coded Cable: digital I/Os, drag chain use, PUR, halogen-free, unshielded, m DSL-0-G0MC 6098 Head A: female connector, M, -pin, straight Head B: male connector, M, -pin, straight Cable: PVC, shielded, m Connection cable, extension cable :, shielded, for TTK70 inspector and MLG DSL--G0MAC 6076 Head A: female connector, M, -pin, straight Head B: male connector, M, -pin, straight Cable: drag chain use, PUR, halogen-free, shielded,.7 m Connection cable, extension cable :, shielded DSL--GM7AC Adapters and distributors Plug connectors and cables 8 Online data sheet ::7 Subject to change without notice

9 MLG0N-0890P00 MLG- ProNet Brief description Type Part no. Head A: male connector, M, -pin, D-coded Head B: male connector, M, -pin, D-coded Cable: Ethernet, twisted pair, PUR, halogen-free, shielded, m SSL-0-G0ME 60 Head A: male connector, M, -pin, straight, D-coded Head B: male connector, RJ, 8-pin, straight Cable: Ethernet, twisted pair, PUR, halogen-free, shielded, m SSL-J0-G0ME ::7 Online data sheet Subject to change without notice 9

10 Online data sheet SICK at a glance SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applications. A unique range of products and services creates the perfect basis for controlling processes securely and efficiently, protecting individuals from accidents and preventing damage to the environment. We have extensive experience in a wide range of industries and understand their processes and requirements. With intelligent sensors, we can deliver exactly what our customers need. In application centers in Europe, Asia and North America, system solutions are tested and optimized in accordance with customer specifications. All this makes us a reliable supplier and development partner. Comprehensive services complete our offering: SICK LifeTime Services provide support throughout the machine life cycle and ensure safety and productivity. For us, that is Sensor Intelligence. Worldwide presence: Contacts and other locations SICK AG Waldkirch Germany