M4Y/M4W/M5W/M4M Series

Size: px

Start display at page:

Download "M4Y/M4W/M5W/M4M Series"

Priscilla Fitzgerald
6 years ago
Views:

1 4Y/4W/5W/4 Series Panel selection Ⅱ This panel selection is except T4N / T4Y / T4W Series. Digital panel 4 1 / 2 Digit 3 1 / 2 Digit digit Indicator Single output setting Dual output setting Output 5W Series 4Y Series 4W Series 4 Series 4W1P Series 41P Series 4W2P Series 42P Series Series DC Voltage AC Current DC Current AC Current rpm speed Scaling factor (4WP) easurement L52 L54 L56 L57 L58 L59 Page L48

2 Digital Panel eter Specifications Classification Indicator Single preset output type Dual preset output type easurement DC, AC voltage DC, AC ampere AC power (010VDC) rpm, speed (010VDC) (010VAC) factor (DC420mA) ax. allowable input Allowable voltage range 4YDA 4YAA 5WDA 5WAA 4YW 5WW 4YT 4YS 5WT 5WS 4YDV 4YAV 5WDV 5WAV 4WDV 4WAV 4DV 4AV 4WDA 4WAA 4DA 4AA 4WW 4W 4WT 4WS 4T 4S 4WP (Refer to L57) 150% for each input specification(at 400VAC:120%) VAC 50/60Hz 5VDC (Except for 5W) 2470VDC 90 to 110% of rated voltage 110/220VAC 50/60Hz 2470VDC VAC 50/60Hz " " symbol in power is optional. (customizable) Environment resistance is rated at no freezing or condensation. 4W1PDV 4W1PAV 41PDV 41P AV 4W1PDA 4W1PAA 41PDA 41PAA 4W1PW 41PW 4W1PT 4W1PS 41PT 41PS consumption DC: 2W, AC: 4VA DC: 3W, AC: 5VA method Character height accuracy Sampling period A/D conversion method Response time frequency Contact capacity Insulation resistance Dielectric strength Noise strength Vibration Shock Relay life cycle Environment Unit weight echanical alfunction echanical alfunction 7 Segment LED display 4Y, 4W, 5W : 14mm / 4W1P, 4W2P, 41P, 42P : 10mm DC : F.S. ±0.2% rdg ±1digit AC : F.S. ±0.5% rdg ±1digit 300ms Dual slope integral method 2sec.(0 to ax.) 2.5 times/sec. 100Ω(at 500VDC megger) 2000VAC 50/60Hz for 1 minute Relay contact output : 250VAC 3A 1c ±1kV the square wave noise (pulse width: 1us) by the noise simulator 4W2PDV 4W2PAV 42PDV 42PAV 4W2PDA 4W2PAA 42PDA 42PAA 4W2PW 42PW 4W2PT 4W2PS 42PT 42PS Relay contact output : 250VAC 3A 1c mm amplitude at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 1 hour 0.5mm amplitude at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 10 minutes 300m/s²(approx. 30G) in X, Y, Z directions for 3 times 100m/s²(approx. 10G) in X, Y, Z directions for 3 times echanical in. 10,000,000 operations alfunction in. 100,000 operations (250VAC 3A resistive load) Ambient temperature 10 to 50, storage: 20 to 60 Ambient humidity 35 to 85%RH, storage: 35 to 85%RH 4Y: Approx. 144g 5W: Approx. 172g 4W: Approx. 168g 4: Approx. 262g (4P: Approx. 268g) 4W1P: Approx. 253g 41P: Approx. 290g 4W2P: Approx. 278g 42P: Approx. 316g (A) Photo electric (B) Fiber optic (C) Door/Area (D) Proximity (E) Pressure (F) Rotary encoder (G) Connector/ Socket (H) Temp. (I) SSR/ (J) Counter (K) Timer (L) Panel () Tacho/ Speed/ Pulse (N) unit (O) Sensor (P) Switching mode power (Q) Stepper motor& Driver&Controller (R) Graphic/ Logic panel (S) Field network device (T) Software (U) Other L49

3 4Y/4W/5W/4 Series Dimensions 4Y Panel cutout (unit: mm) in. 40 in Unit will be displayed in 4W of front panel. 4W1P 4W2P 5W (unit: mm) Panel cutout in in Unit will be displayed in of front panel. 4 41P 42P (unit: mm) Panel cutout in in Unit will be displayed in of front panel. L50

4 Digital Panel eter Connections 4Y 4W W 1 INPUT INPUT INPUT 10 OUT INPUT 2 2 INPUT GH 2 4W1P 4W2P NC HOLD HOLD VAC 50/60Hz 5VDC(Option) 2470VDC(Option) N.C VAC 50/60Hz 2470VDC(Option) 14 6 OUT N.O. CO HOLD RELAY CONTACT NO OUT :250VAC 3A 1c NC CO RESISTIVE LOAD HOLD 5 220VAC 110VAC 50/60Hz 50/60Hz 0V NO CO OUT 220VAC 110VAC 50/60Hz 50/60Hz 0V 220VAC 110VAC 50/60Hz 50/60Hz 0V DC SPS VDC option AC SPS VAC 50/60Hz 4VA RELAY CONTACT OUT : 250VAC 3A 1c RESISTIVE LOAD DC SPS 2470VDC option AC SPS DC SPS 2470VDC option VAC 50/60Hz 4VA AC SPS VAC 50/60Hz 5VA P 42P 9 15 INPUT HOLD VAC 220VAC 18 0V 50/60Hz 50/60Hz DC SPS VDC 2W DC SPS 2470VDC 2W option option AC SPS VAC 50/60Hz 4VA 15 INPUT HOLD 17 NO NC VAC 220VAC 18 0V 50/60Hz 50/60Hz CO AC SPS DC SPS 2470VDC 3W option SET OUT : 250VAC 3A 1c RESISTIVE LOAD VAC 50/60Hz 5VA 15 INPUT HOLD 17 CO VAC 220VAC NO NC 18 0V 50/60Hz 50/60Hz CO NO NC SET OUT : 250VAC 3A 1c RESISTIVE LOAD AC SPS VAC 50/60Hz 5VA SET OUT : 250VAC 3A 1c RESISTIVE LOAD (A) Photo electric (B) Fiber optic (C) Door/Area (D) Proximity (E) Pressure (F) Rotary encoder (G) Connector/ Socket (H) Temp. (I) SSR/ (J) Counter (K) Timer (L) Panel () Tacho/ Speed/ Pulse (N) unit (O) Sensor (P) Switching mode power (Q) Stepper motor& Driver&Controller (R) Graphic/ Logic panel (S) Field network device (T) Software (U) Other L51

5 4Y/4W/5W/4 Series DIN W72 H36mm, W96 H48mm, W72 H72mm Digital panel for measuring voltage Features ax. display: 19999(5W), 1999(Others) Auto zero function or Hold function(except for 5W) RS/AVG value selection function(ac Voltage) 7 Segment LED Case size by DIN specification Indicator, Single preset output type, Dual preset output type Please read Caution for your safety in operation manual before using. Ordering information 4 W AV 1 Item Digit Output Input AC measuring method easuring input 1 4Y / 4W / 4 5W NO DC INPUT AC INPUT DC INPUT AC INPUT mV 199.9mV mV mV V 1.999V V V V 19.99V V V V 199.9V V V V 300.0V 400.0V V XX Option Option No mark R 3 DV DA AV AA No mark 1P 2P Y 4 W 4 AVG value RS value DC Volt DC Ampere AC Volt AC Ampere Indicator Single setting Dual setting DIN W72 H36mm DIN W96 H48mm DIN W72 H72mm (3½digit) (4½digit) eter 1: easuring input and display are 1:1. 2: Available input can be direct connection if under 300VDC, 400VAC. 3: 5W AC measurement type has RS only. It does not have "R" in model name. 4: 4Y, 5W are indicator. L52

6 Digital Panel eter The application of connections easuring DC voltage (Fig. 1) easuring lower than 300VDC of measurement voltage (V1) V1 V1 (Fig. 2) easuring higher than 300VDC of measurement voltage When measuring voltage is higher than 300VDC, please select R1 and R2 with multiplying resistance on the external to make V2 less than max. measurement voltage. V3 = ultiplier R1 V2 R2 R2 V1 R1 > R2 R1 R2 (Fig. 3) easuring lower than 400VAC of measurement voltage (V1) P.T (Fig. 4) easuring higher than 400VAC of measurement voltage (V1) V2 = N2 V1 N1 Ex)Ordering D.P. for measuring 1000VAC Select the P.T having 1000VAC of 1st part voltage and 220VAC of 2nd part voltage and order the D.P. indicating 1000V for 220VAC. D.P. D.P. Ex)Ordering D.P. for measuring 1000VDC As above Fig. 2, select the R1 value to make 300VDC on R2. (Generally R1 value will be higher than R2 value.) Order the D.P. indicating 1000V for 300VDC. easuring AC voltage V1 V1 N1 N2 D.P. V2 D.P. When measuring voltage is higher than 400VAC, please use the P.T on the external. (V2 voltage must be lower than max. measurement voltage) Proper usage Please notice the product customized by requirement cannot be replaced. If it displays arbitrary number even though the power is ON, please remove the input signal and check whether it displays "000" after short the measurement terminal. (Checking auto zero function) If it does not display "000", please connect to our A/S center. Note)5W Series does not have auto zero function. If it indicates "1999" or "`999" during input signal is ON, please turn OFF the power and check the connection condition. It is because the input signal is too low or high. Note) 5W Series indicates "19999" or "`9999". The specification of measurement input, which is indicated in ordering information, is a standard specification, 1:1 of measurement input and process value. When it is an optional specification of AC volt, please mark the specification of P.T after select a model. Please notice P.T is not included. The D.P. for measuring AC voltage has both AVG type and RS type separately. Because it is produced with AVG type, please mark the model name accurately. Ex)In case of 4Y, 4W, 4 Series (Include setting type) The model of RS type: 4WAVR6 The model of AVG type: 4WAV6 The specification will be set by sign "R". 5W Series has RS type only, and it is not indicated "R" on the model name. In case of D.P. for measuring AC voltage, please check if it is AVG type or RS type when comparison measuring with other company's products. (A) Photo electric (B) Fiber optic (C) Door/Area (D) Proximity (E) Pressure (F) Rotary encoder (G) Connector/ Socket (H) Temp. (I) SSR/ (J) Counter (K) Timer (L) Panel () Tacho/ Speed/ Pulse (N) unit (O) Sensor (P) Switching mode power (Q) Stepper motor& Driver&Controller (R) Graphic/ Logic panel (S) Field network device (T) Software (U) Other L53

7 4Y/4W/5W/4 Series DIN W72 H36mm, W96 H48mm, W72 H72mm Digital panel for measuring ampere Features ax. display: 19999(5W), 1999(Others) Auto zero function or hold function(except for 5W) RS/AVG value selection function(ac Voltage) 7 Segment LED display Case size by DIN specification Indicator, single preset output type, Dual preset output type Please read Caution for your safety in operation manual before using. Ordering information 4 W AA 1 AC measuring method easuring input 1 4Y / 4W / 4 5W NO DC INPUT AC INPUT DC INPUT AC INPUT μA 19.99mA μA mA mA 199.9mA mA mA mA 1.999A mA A mA 19.99A mA A A 199.9A A A A 1999A A A A A A A XX Option Option No mark AVG value RS value R 2 Input DV DA AV AA DC Volt DC Ampere AC Volt AC Ampere Output No mark Indicator 1P Single setting 2P Dual setting Item Digit Y 3 W 3 DIN W72 H36mm DIN W96 H48mm DIN W72 H72mm (3½digit) (4½digit) eter 1: easuring input and display is 1:1 for DC INPUT No.1to 5 and AC INPUT No.1 to 3, DC INPUT No.6 to 8 is used with DC50mV Shunt, AC INPUT No.4 to 6 are used with C.T(Current transformer) 2: 5W AC measurement type has RS only. It does not have "R" in model name. 3: 4Y, 5W are indicator. L54

8 Digital Panel eter Connections easuring DC ampere V D.P. (Fig. 1) easuring lower than DC2A of current Shunt V I D.P. (Fig. 2) easuring higher than DC2A of current I I DC50mV D.P. (Fig. 3) easuring lower than AC5A of current gher than DC2A is using shunt for measuring current. Basically the 2nd part of shunt value is DC50mV. Ex) Ordering D.P. in case of DC10A of measuring ampere: Select DC10A/50mVDC of shunt and 50mVDC/DC10.00A of D.P.. easuring AC ampere Ex) Ordering D.P. in case of lower than AC5A of measuring ampere : Select 4WAAXX AC5A/5.00A Proper usage Please notice the product customized by requirement cannot be replaced. If it displays arbitrary number even though the power is ON, please remove the input signal and check whether it displays "000"after short the measurement terminal. (Checking auto Zero function) If it does not display "000", please connect to our A/S center. Note) 5W Series does not have auto zero function. If it indicates "1999" or "`999"during input signal is ON, please turn OFF the power and check the connection condition. It is because the input signal is too low or high. Note) 5W Series indicates "19999" or "`9999". The specification of measurement input, which is indicated in ordering information, is a standard specification, 1:1 of measurement input and process value. Please notice a shunt and C.T are not included. The D.P. for measuring AC ampere has both AVG type and RS type separately. Because it is produced with AVG type, please mark the model name accurately. Ex) In case of 4Y, 4W, 4 Series(Include setting type) The model of RS type: 4WAAR5 The model of AVG type: 4WAA5 The specification will be set by sign "R". 5W Series has RS type only, and it is not indicated "R" on the model name. In case of D.P. for measuring AC ampere, please check if it is AVG type or RS type when comparison measuring with other company's products. (A) Photo electric (B) Fiber optic (C) Door/Area (D) Proximity (E) Pressure (F) Rotary encoder (G) Connector/ Socket (H) Temp. (I) SSR/ (J) Counter (K) Timer (L) Panel () Tacho/ Speed/ Pulse (N) unit (O) Sensor I (P) Switching mode power C.T D.P. (Q) Stepper motor& Driver&Controller (Fig. 4) easuring higher than AC5A of current If the current is higher than AC5A, please use C.T. (R) Graphic/ Logic panel (S) Field network device Ex) How to order D.P. in case of AC300A of measuring ampere : Select AC300A/5A of C.T and AC5A/300A of D.P.. (T) Software (U) Other L55

9 4Y/4W/5W/4 Series DIN W72 H36mm, W96 H48mm, W72 H72mm Digital panel for measuring power Features ax. display : 19999(5W), 1999(Others) Auto zero function and hold function(except for 5W) the output(010vdc) from power converter. (It is available to correspond when output is DC4 20mA, 15VDC.) 7 Segment LED display Case size by DIN specification. Indicator, single preset output type, Dual preset output type Please read Caution for your safety in operation manual before using. Ordering information 4 W W 1 scale 1 easurement function NO 4Y / 4W / 4 5W DISPLAY DISPLAY W W kW kW kW kW kW kW kW kW XX Option Option W Watt eter Output No mark Indicator 1P Single setting 2P Dual setting Item Digit Y 2 W 2 DIN W72 H36mm DIN W96 H48mm DIN W72 H72mm (3½digit) (4½digit) eter 1: When output specification of power converter is 010VDC, display value is maximum. 2: 4Y, 5W are indicator. If output specification of Converter or power converter is DC420mA or 15VDC, please use scaling. Application of connection L1 L2 L3 C.T C.T P.T P.T Output : DC010V D.P. The specification of measuring input indicated in ordering information, is display value output specification is 010VDC. When the output of transducer or converter is DC420mA or 15VDC, please use scaling. (Transducer) L56

10 Digital Panel eter DIN W72 H36mm, W96 H48mm, W72 H72mm Digital panel for measuring Revolution/Speed Features ax. display: 19999(5W), 1999(Others) Auto zero function or hold function(except for 5W) RS/AVG value selection function(ac voltage) 7 Segment LED display Case size by DIN specification Indicator, single preset output type, Dual preset output type Please read Caution for your safety in operation manual before using. Ordering information 4 W T 1 (A) Photo electric (B) Fiber optic (C) Door/Area (D) Proximity (E) Pressure (F) Rotary encoder (G) Connector/ Socket (H) Temp. Item Digit Output AC measuring method easurement function easuring input NO 4Y / 4W / 4 5W INPUT INPUT 1 010VDC / VDC / VAC / VAC / DX DC Input option DC Input option XX AC Input option AC Input option No mark AVG value RS value 1: AC measuring type of 5W only applies to RS and it is not marked with "R" in the model name. 2: 4Y, 5W are indicator. R 1 T S Tacho(rpm) Line Speed eter(m/min) No mark Indicator 1P Single setting output 2P Dual setting output Y 2 W (3½digit) (4½digit) DIN W72 H36mm DIN W96 H48mm DIN W72 H72mm eter (I) SSR/ (J) Counter (K) Timer (L) Panel () Tacho/ Speed/ Pulse (N) unit (O) Sensor (P) Switching mode power (Q) Stepper motor& Driver&Controller (R) Graphic/ Logic panel Application of connection T.G D.P. POWER otor Tacho Generator Tacho/Speed Tacho Generator(T.G) This generator makes a voltage in proportion to revolution speed of motor. The D.P. receives the voltage and displays the number of revolution and please check the specification of T.G. The specification of measuring input indicated in ordering information, is display value when output specification is 010VDC and 010VAC. Different output specification of tacho generator is optional. (S) Field network device (T) Software (U) Other L57

11 4Y/4W/5W/4 Series DIN W72 H36mm, W96 H48mm, W72 H72mm Digital scaling Features ax. display : 19999(5W), 1999(Others) 7 Segment LED display Case size by DIN specification Linear display function by INPUT specification Indicator, single preset output type, dual preset output type Please read Caution for your safety in operation manual before using. Ordering information 4 W DI X Input scale X range(option) DI DC420mA(15VDC : Option 1 ) Output No mark Indicator 1P Single setting 2P Dual setting Digit (3½digit) (4½digit) Item eter 1: 15VDC of measuring input specification is available by option. It will be a default value if there is no request for order. 2: 4Y, 5W are indicator. Application of connection () Y 2 W 2 DIN W72 H36mm DIN W96 H48mm DIN W72 H72mm Temperature Sensor Pressure Sensor CONVERTER (Transducer) Output:DC420mA (15VDC: Option) () D.P. The measurement input specification of ordering information, is an output specification of converter and DC420mA is the standard specification. In case, the output of converter is 15VDC, it is customizable. DC volt can be produced by requirement, in case, it is out of the 15VDC output specification. L58

Digital Panel eter DIN W96 H48mm, Digital panel for displaying power factor Features indicator of power factor Input : DC420mA(Output specification of power factor transducer) : 0.50 to 1.00 to 0.

12 Digital Panel eter DIN W96 H48mm, Digital panel for displaying power factor Features indicator of power factor Input : DC420mA(Output specification of power factor transducer) : 0.50 to 1.00 to 0.50 Please read Caution for your safety in operation manual before using. (A) Photo electric (B) Fiber optic (C) Door/Area (D) Proximity Ordering information (E) Pressure 4 W P Item Digit Specifications odel 4WP easurement function factor Input DC420mA 0.50 to 1.00 to 0.50 cosø 110/220VAC 50/60Hz Allowable voltage range 90 to 110% of rated voltage consumption 4VA method 7 Segment LED display Character height 14mm accuracy F.S: ±3% rdg ±1digit Sampling period 300ms Response speed 2sec.(0 to ax.) Point display Fixed point Insulation resistance in. 100Ω(at 500VDC megger) Dielectric strength 2000VAC 50/60Hz for 1 minute Noise strength ±1kV the square wave noise(pulse width : 1μs ) by the noise simulator 0.75mm amplitude at frequency of 10 to 55Hz echanical (for 1 min.) in each of X, Y, Z directions for 1 hour Vibration 0.5mm amplitude at frequency of 10 to 55Hz alfunction (for 1 min.) in each of X, Y, Z directions for 10 minutes Shock echanical 300m/s²(approx. 30G) in each of X, Y, Z directions for 3 times alfunction 100m/s²(approx. 10G) in each of X, Y, Z directions for 3 times Ambient Environ 10 to 50, storage : 25 to 60 temperature ment Ambient humidity 35 to 85%RH, storage : 35 to 85%RH Unit weight Approx. 317g Environment resistance is rated at no freezing or condensation. Dimension easurement function 12 P W Factor DIN W96 H48mm (4digit) eter 104 L1 Connections INPUT Application of connection C.T L2 LOAD L3 C.T P.T P.T Output : DC420mA Panel cutout in VAC 110VAC 50/60Hz 50/60Hz ( factor transducer) DP 0V (unit: mm) (F) Rotary encoder (G) Connector/ Socket (H) Temp. (I) SSR/ (J) Counter (K) Timer (L) Panel () Tacho/ Speed/ Pulse (N) unit (O) Sensor (P) Switching mode power (Q) Stepper motor& Driver&Controller (R) Graphic/ Logic panel (S) Field network device (T) Software (U) Other in L59

PRD/PRDW Series. Long Distance Type

PRD/PRDW Series. Long Distance Type Long Distance Type Long distance proximity Features Long sensing distance (. to times longer sensing distance guaranteed compared to existing models) Improved the noise resistance with dedicated IC Built-in