MHAP HDmag. Features
|
|
|
- Ernest Christian Russell
- 6 years ago
- Views:
Transcription
1 Features MHP Version for axial screw mounting bsolute encoder with magnetic sensing and without bearings with integrated FPG signal processing bsolute resolution max. 17 bit singleturn dditional incremental output Robust and wearless Electronics is fully encapsulated High protection standard Large tolerances: axial, radial max. 0.5 mm Simple mounting, easy adaptation Several mounting possibilities Technical data - electrical ratings Interference immunity EN Emitted interference EN pprovals CE, RoHS Technical data - electrical ratings (SSI) Voltage supply Interface Function Steps per turn Sensing method Code Code sequence dditional output signals Technical data - electrical ratings (square-wave) Voltage supply Consumption w/o load VDC < 300 m Pulses per revolution Phase shift 90 ±10 Scan ratio % Sensing method Output frequency Magnetic 2 MHz Output signals +, -, B+, B- Output stages VDC SSI Singleturn / 17 bit Magnetic Gray or binary CW default Square-wave TTL (RS422) Square-wave universal HTL/ TTL SinCos HTL-P (power linedriver) TTL/RS422 Technical data - electrical ratings (sinewave) Voltage supply VDC Consumption w/o load < 300 m Sinewave cycles per turn Phase shift 90 ±5 Sensing method Magnetic Output signals +, -, B+, B- Output stages SinCos 1 Vpp Difference of SinCos 20 mv amplitude Harmonics typ. -40 db DC offset 20 mv Bandwidth 400 khz (-3 db) Technical data - mechanical design Sensing head Size (flange) xial tolerance Radial tolerance FPG signal processing ø203.1 mm (wheel/head) mm (wheel/head) Shaft type ø mm (through hollow shaft) Protection DIN EN IP 67 (head), IP 68 (wheel) Operating temperature C Operating speed 4000 rpm Resistance IEC Vibration 30 g, Hz IEC Shock 300 g, 2 ms ccuracy of magnetic ±200 measure Connection Flange connector M23, 17-pin 1
2 Part number MHP 200 B5 S D Pulse number/sinewave cycles - see table P R U Z Voltage supply / signals 4, VDC / SinCos 4, VDC / square-wave (TTL) VDC / square-wave (5 VDC = TTL / VDC = HTL universal) Without additional output signals O E N Parity Odd Even None Resolution Singleturn (bit) 8, 9, 10, 11, 12, 13, 14, 15, 16, 17 B G Code Binary code Gray code Mounting type / hollow shaft (ø mm) Screw mounting G50, G75, G80, G85, G90, G95, G100, G110, G115, G120, G130, G150, G160, G170, G180 Clamping set mounting Z70, Z75, Z80, Z85, Z90, Z95, Z100, Z110, Z120, Z130, Z140, Z150 Shrink fit mounting H50, H75, H80, H85, H90, H95, H100, H110, H115, H120, H130, H150, H160, H170, H180 Clamping ring mounting K70, K75, K80, K85, K90, K95, K100, K105, K110, K115, K120, K140, K150 Pulse number/sinewave cycles Maximum sinewave cycles for SinCos output. 2
3 Data transfer Clock Data + - B+ B- t 1 T = µs t 1 = µs t 2 = µs (depending on clock frequency) Clock frequency f Output signals MSB T nt Bit 1 Bit 0 LSB 2 MHz Version with additional square-wave signals HTL oder TTL at positive rotating 90 t 2 Terminal assignment View Flange connector M23, 17-pin, male contacts, CW Pin ssignment 1 Do not use 2 Do not use 3 Do not use 4 Do not use 5 Do not use 6 Do not use 7 +UB 8 SSI CLK+ 9 SSI CLK V 11 Internal shield 12 B+ / SIN+ * 13 B- / SIN- * 14 SSI DT / COS+ * 16 - / COS- * 17 SSI DT- * Do not use in version without incremental output Version with additional sinewave signals at positive rotating 2.5 V = [COS+] [COS-] B = [SIN+] [SIN-] 360 el. 90 el V 1 V 1 V 3
4 Dimensions Version for axial screw mounting 6x ø5.5 bsolute track 3x Jack-screw thread M5 Zero position Check the ush alignment of the encoder wheel and the sensor head on mounting ir gap ø = øb = ø+15 (for ø = ) HM08M28750 Version for clamping set mounting ir gap Zero position ø = bsolute track Check the ush alignment of the encoder wheel and the sensor head on mounting HM08M
5 Dimensions Version for shrink fit mounting bsolute track 3x Jack-screw thread M6 Zero position Check the ush alignment of the encoder wheel and the sensor head on mounting ir gap ø = øb = ø+15 (für ø = ) HM08M28865 Version for clamping ring mounting Clamping ring Zero position ir gap ø = bsolute track Check the ush alignment of the encoder wheel and the sensor head on mounting HM09M
6 6
Encoders without bearings - incremental Magnetic sensing, through hollow shaft max. ø180 mm pulses or 128 sinewave cycles per turn
Features Sinewave or square-wave signals Robust and wearless High protection through fully encapsulated electronics Large tolerances: axial ±3 mm, radial max. 2.2 mm Very compact dimensions Simple mounting,
MHAD 50 - HDmag. Features
MHAD 50 with cable Features Absolute encoder with magnetic sensing and without bearings Absolute resolution max. 16 bit singleturn Additional incremental signals Robust and wearless Protection IP 67 Large
HMG 11. Features. Optional Additional incremental output (TTL / HTL) HMG 11. Technical data - mechanical design. Technical data - electrical ratings
Features Multiturn / SSI / Profibus / CANopen / DeviceNet / PROFINET Optical sensing method Singleturn 1 bit, multiturn 1 bit / 16 bit Blind or through hollow shaft or cone shaft ø16-0 mm Multiturn sensing
Incremental encoders Solid shaft with EURO flange B pulses per revolution
Solid shaft with EURO flange B 0 5000 pulses per revolution EIL580 - EURO flange B - OptoPulse Features Size ø58 mm Precise optical sensing Output signal level TTL or HTL EURO flange B Connection axial,
Absolute encoders - SSI
Features Encoder multiturn / SSI Optical sensing Resolution: singleturn 14 bit, multiturn 12 bit Compact design Cost-efficient mounting High reliability by self-diagnostics Counting direction input Available
AMG 11. Features. Optional. Additional incremental output (TTL / HTL) AMG 11. Technical data - mechanical design. Technical data - electrical ratings
Features Multiturn SSI / Profibus / CANopen / DeviceNet / PROFINET Optical sensing method Singleturn 1 bit, multiturn 1 bit / 16 bit EURO-flange B10 / solid shaft ø11 mm Multiturn sensing with microgen
PRELIMINARY EAMH 58 B / C - 63 A / D / E BIT PARALLEL - SSI SOLID SHAFT MULTITURN ABSOLUTE ENCODER ORDERING CODE BIT PARALLEL
EAMH 58 B / C - 63 A / D / E BIT PARALLEL - SSI SOLID SHAFT MULTITURN ABSOLUTE ENCODER MAIN FEATURES Industry standard multiturn absolute encoder for factory automation applications. Optical sensor technology
POG 10 + DSL. Features
Features Freely programmable on and off switching speed Programming via included software (RS485 interface) TTL or HTL, EURO-flange and/or housing foot 3 / solid shaft ø11 mm DSL.R: 3 outputs speed controlled
Absolute Shaft Encoders ACURO industry
bsolute Shaft Encoders CURO industry Type C 58 Synchro flange Compact design: 5mm length for single or multiturn ids for start up and operation: diagnostic LED, preset key with optical response, status
Speed switches Programmable, digital speed switch With incremental encoder HOG 10
Features Freely programmable on and off switching speed Operation via included software (RS485 interface) Additional incremental signals (HTL/TTL) Combination with end shaft ø16 mm DSL.R: 3 outputs speed
Speed switches Programmable, digital speed switch With incremental encoder POG 10
Features Freely programmable on and off switching speed Operation via included software (RS485 interface) Additional incremental signals (HTL/TTL) EURO-flange B10 / shaft ø11 mm DSL.R: 3 outputs speed
EAM 58 B / C - 63 A / D / E BIT PARALLEL - SSI
EAM 58 B / C - 63 A / D / E BIT PARALLEL - SSI SOLID SHAFT MULTITURN ABSOLUTE ENCODER MAIN FEATURES Industry standard multiturn absolute encoder for factory automation applications. Optical sensor technology
Absolute encoders - bus interfaces Solid shaft with clamping or synchro flange Magnetic single- or multiturn encoders 14 bit ST / 18 bit MT
Features Encoder single- or multiturn / CANopen Precise magnetic sensing Angular accuracy up to ±0.15 Additional incremental signals High protection up to IP 67 High resistance to shock and vibrations
The pages in this document have been extracted from a larger document and as such any page numbers are relevant only to the original document.
The pages in this document have been extracted from a larger document and as such any page numbers are relevant only to the original document. Rotary Encoder Solutions Limited Dutton Road Redwither Business
Incremental encoders Solid shaft with clamping or synchro flange pulses per revolution
GI55, GI56 Features Encoder with solid shaft ø mm or ø6 mm Max. 6000 pulses per revolution Optical sensing method Clamping or synchro flange Industrial standard High rotation speed up to 000 rpm Optional
DATA SHEET ABSOLUTE ROTARY ENCODER SSI
Main Features - Compact and Robust Industrial Model - Synchronous Serial Interface SSI (RS-422 / TTL) - Optional Incremental Output RS-422 or Push-Pull (TTL, HTL compatible) - Standard 59 mm Housing -
Absolute encoders - bus interfaces Encoder kit Magnetic single- or multiturn encoders 14 bit ST / 18 bit MT
Magnetic single- or multiturn encoders 1 bit ST / 18 bit MT Features single- or multiturn / CANopen Precise magnetic sensing Angular accuracy up to ±0.1 Additional incremental signals High protection up
Absolute encoders - bus interfaces
Features Absolute encoder multiturn Optical sensing method Max. resolution: singleturn 18 bit, multiturn 16 bit LED status indicator PROFINET IO Maximum resistant against magnetic fields Optional EAL580
Absolute Encoders Multiturn
The multiturn encoders 6 and 8, with interface and combined optical and magnetic sensor technology, offer a maximum resolution of 5 bits. These encoders are programmable via the Ezturn software. The hollow
TECHNICAL DATASHEET Absolute Motorfeedback Series AD 34
For brushless servo motors Light duty encoder Unique mounting concept: Save installation time and cost Mounting Depth: 25 mm (ST), 34 mm (MT) Up to 9 Bit ST - resolution + 2 Bit MT - resolution +20 C operating
Integrated in the motor Mounting via spread shaft Mounting via plug-in shaft Mounting via hollow shaft Mounting via coupling and solid shaft
Encoders Product description Encoders.1 Product description.1.1 Description The encoder types in the DR.. modular motor system were developed in such a way that the requirement has been met for both a
Absolute encoders - bus interfaces Solid shaft with synchro flange Magnetic single- or multiturn encoders 14 bit ST / 18 bit MT
EAM60 - solid shaft CANopen - MAGRES Features Encoder single- or multiturn / CANopen Precise magnetic sensing Angular accuracy up to ±0.1 Additional incremental signals High protection up to IP 67 High
Absolute encoders - modular bus covers Solid shaft with clamping or synchro flange Optical single and multiturn encoders 13 bit ST / 16 bit MT
Features Encoder single- or multiturn / bus cover Optical sensing method Resolution: singleturn 13 bit, multiturn 16 bit Clamping or synchro flange CANopen /DeviceNet/EtherCAT/EtherNet-IP SAEJ1939/PROFINET/POWERLINK/Profibus/SSI
SERIE 59. Rear clamp. Frontal clamp HIGH RESOLUTION HOLLOW SHAFT INCREMENTAL ENCODER FOR INDUSTRIAL APPLICATIONS
HIGH RESOLUTION HOLLOW SHAFT INCREMENTAL ENCODER FOR INDUSTRIAL APPLICATIONS Resolution up to 50.000 pulses per turn External diameter 58 mm Hollow shaft from Ø 10 to 14 mm Protection class IP67 according
Encoder WDGA 58B SSI.
Encoder WDGA 58B SSI www.wachendorff-automation.com/wdga58bssi Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer
TECHNICAL DATASHEET Absolute Encoder AC 58 - SUCOnet
Compact design SUCOnet or Hengstler-G1-Protocol Parameterizable: preset, direction, scaling factor, resolution PC communication via RS 485 with Hengstler-G1-Protocol Clamping flange TECHNICAL DATA mechanical
Absolute encoders - bus interfaces Solid shaft with clamping or synchro flange Optical multiturn encoders 13 bit ST / 12 bit MT, RS485
Optical multiturn encoders 1 bit ST / 12 bit MT, RS485 Features Encoder multiturn / RS485 Optical sensing method Resolution: singleturn 1 bit, multiturn 12 bit Clamping or synchro flange Fieldbus protocol
NOVOHALL Rotary Sensor non-contacting. Series RSC2800 digital SSI, SPI, Incremental
NOVOHALL Rotary Sensor non-contacting Series RSC2800 digital SSI, SPI, Incremental The contactless sensor utilizes the orientation of a magnetic field for the determination of the measurement angle. The
NOVOTURN Multiturn-Sensor non-contacting. Series RSM2800 digital SSI, SPI
NOVOTURN Multiturn-Sensor non-contacting Series RSM2800 digital SSI, SPI Special features True Power On System: counts turns even when not powered. Patented non-volatile technology does not require gears
RoHS. Shock / vibration resistant. Short circuit proof. Flexible. . XXXX e. . XXXX e
The Sendix multiturn encoders 5862 and 5882, with SSI or RS485 interface and combined optical and magnetic sensor technology, offer a maximum resolution of 25 bits. These encoders are programmable via
Rotary Measuring Technology Absolute encoders, Multiturn, optional with incremental track
Electronic multiturn gear with intelligent sensing technology (IST) Integrative Technology Max. 4 programmable outputs* for the SSI version Programmable parameters include*: code type, resolution per revolution,
Rotary Position Technology Incremental Encoders
-40 to 85 C IP Bearing-Lock High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit protected Reverse polarity protection Optical
ABSOLUTE ROTARY ENCODER ETHERNET/IP
Main Features - Compact and heavy duty industrial model - Interface: EtherNet/IP - Conformance tested by ODVA - Housing: 58 mm - Full shaft: 6 or 10 mm / hollow shaft15 mm - Resolution: max. 30 Bit = 1,073,741,824
RoHS. High shaft load capacity. Shock / vibration resistant
Due to their sturdy bearing construction in Safety-Lock Design, the Sendix 5000 and 5020 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up
Rotary Measuring Technology Absolute singleturn encoder shaft version
Highest shock resistance on the market ( 2500 m/s 2, 6 ms acc. to DIN IEC 68-2-27) SSI, parallel or current (4... 20 ma) interface Divisions: up to 16384 (14 bits), singleturn Housing Ø 58 mm IP 65 Various
Delivery. Connection. C. AA+BB Helicoidal cable 2. Radial M12 8p CCW. 3. Radial M23 12p CCW
PROGRAMMABLE INCREMENTAL HOLLOW SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS Programmable incremental optical encoder from 1 to 65.536 pulses per rotation Programmable via USB, without an additional programming
Data Sheet MEM 16. Absolute Encoder Multiturn
Absolute Encoder Multiturn Features Resolution: Singleturn: up to 8,192 (13 Bit) steps per revolution Multiturn: up to 4,294,967,296 (32 Bit) revolutions Interface: SSI (synchron serial interface) or BiSS
Optical Absolute Encoder Singleturn or Multiturn with hollow shaft Profibus-DP, CAN, CANopen, DeviceNet GX, G1, G2AMH / GX, G1, G2MMH
TM Optical Absolute Encoder Singleturn or Multiturn with hollow shaft,, open, GX, G1, G2AMH / GX, G1, G2MMH Features Interfaces:,, open, Resolution: 13 bit singleturn, 29 bit multiturn Parameterizable
SSI GENERAL INFORMATION ABSOLUT AND PROGRAMMABLE ABSOLUT SSI ENCODERS
GENERAL INFORMA SSI ABSOLUT AND PROGRAMMABLE ABSOLUT SSI ENCODERS In many cases, the data transmitted from one system to another are subjected to magnetic fields and noise, by using standard interfaces,
Product Information ECI 1118 EQI 1130 ECI 1119 EQI Absolute Rotary Encoders without Integral Bearing
Product Information ECI EQI 0 ECI 9 EQI Absolute Rotary Encoders without Integral Bearing 0 ECIEQI 00 Absolute rotary encoders Synchro flange 0F) for axial mounting Blind hollow shaft A) Without integral
ABSOLUTE ROTARY ENCODER INTERBUS
Main Features - Compact and heavy duty industrial model - Interface: Remote-Bus - ENCOM-Profile: K (programmable) - Housing: 58 mm - Shaft: 6 or 10 mm, hollow- 15 mm - Resolution: max. 25 Bit =,554,42
Rotary Measurement Technology Absolute Encoders, Multiturn
-40 to 80 C IP Mechanical drive Safety-LockTM High rotational speed Temperature High IP High shaft load capacity Shock/ vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection
Rotary Measurement Technology Absolute Encoders, Singleturn
-40 to 80 C IP Safety-LockTM High rotational speed Temperature High IP High shaft load capacity Shock/ vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Reliable
DATA SHEET ABSOLUTE ROTARY ENCODER SSI
Main Features - Compact and Robust Industrial Model - Synchronous Serial Interface SSI (RS-422 / TTL) - Optional Incremental Output RS-422 or Push-Pull (TTL, HTL compatible) - Standard 59 mm Housing -
Rotary Measuring Technology
--20 40... 60 + C 85 Temperature Shock/vibration resistant Short-circuit proof Reverse polarity protection One type for every situation: Version "flameproof-enclosure": approval zones 1, 2 and 21, 22 Zones
Rotary Measuring Technology Absolute encoders, Singleturn, Profibus-DP
Safety-Lock TM High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Reliable Increased ability
Rotary Position Technology Absolute Encoders, Singleturn
-20 to 85 C High rotational speed Temperature Shock/vibration resistant Short-circuit proof Reverse polarity protection Optical sensor Magnetic field proof Rugged Highest shock resistance on the market:
ABSOLUTE ROTARY ENCODER SSI PROGRAMMABLE
Main Features - Compact and heavy-duty industrial model - Interface: Synchronous-serial (RS422/485) - Housing: 58 mm - Shaft: 6 or 10 mm - Resolution: Max. 25 Bit =,554,42 steps over 4,096 revolutions
bidirectionally as well as the rotation sense of shafts. With absolute encoders instead, each incremental
and draw-wire sensors Spot-on and trailblazing technology measure rotation speed, sense, position, angle and length. For this purpose, they convert mechanical motion in electrical signals. There are incremental
TECHNICAL DATASHEET Absolute Encoder AC 58 - Profibus
Diagnostic LED Cable or M12 connector Output of speed, acceleration Programmable: Resolution, Preset, Direction, Operation time Option: Display "tico" Address via interface parameterizable (optional) hubshaft
ENC-IQ58S-H-PROG-ZCW-4-06-A-L1
IQ58/ IQ58S/ CKQ58 Hollow Shaft Magnetic Encoder Series FEATURES Programmable Incremental Encoder Resolution from 1 to 16384 PPR Selectable Index length 90 or 180 el. Push-Pull and Line Driver Compatible
Rotary Position Technology Incremental Encoders
-40 to 85 C IP Safety-Lock High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Optical sensor
Encoders Absolute Singleturn Encoder Types A58CS8
Types A58CS8 Sturdy design with hardened bearings High rotation speed -40...+80 C/-40...+76 F operating temperature range High shock and vibration resistance Magnetic field proof also available as explosion
Encoder WDG 58A.
Encoder WDG www.wachendorffautomation.com/wdga Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions Maximum
Data Sheet MEM 22. Absolute Encoder Multiturn
Absolute Encoder Multiturn Features Resolution: Singleturn: up to 16,384 (14 Bit) steps per revolution Multiturn: up to 16,777,216 (24 Bit) revolutions Interface: SSI (synchron serial interface) or BiSS
Encoder WDGA 36A SSI.
Encoder WDGA 36A SSI www.wachendorff-automation.com/wdga36assi Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer
Material: Weight: Shaft Loads: Cable: Connector:
Absolute Encoder Type 2RMHF-SSI Absolute Encoder - Ø 24 mm Blind Hollow Shaft - Ø 3 mm to Ø 1/4 inch Singleturn or Multiturn SSI Interface Binary or Gray Code Preset of Zero Position Choice of Counting
Rotary Measuring Technology Absolute encoders, Multiturn, Profibus-DP
Mechanical drive Safety-Lock TM High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Reliable
Shaft: Ø 10 mm or Ø 12 mm. Material: Weight: Bearing Life: Shaft Speed: Shaft Loads: Shock: Vibration: Bump:
Explosion Proof / Absolute Type EXAG - SSI Ex d - Proof Shaft Encoder - Ø 78 mm Shaft: Ø 10 mm or Ø 12 mm Synchronous Serial Interface (SSI) (RS422/TTL) Resolution up to 30 bits Removable End Cap for on-site
Encoders IE Series. Magnetic Encoders 6,1 12, Features: 64 to 512 Lines per revolution 2 Channels Digital output
Encoders Magnetic Encoders Features: 64 to 52 Lines per revolution 2 Channels Digital output Series IE2 52 Lines per revolution Signal output, square wave Supply voltage Current consumption, typical (V
Absolute encoders - modular bus covers
BMMH 58 flexible with blind hollow shaft Features Encoder single- or multiturn / bus cover Robust magnetic sensing Resolution: singleturn bit, multiturn 8 bit Modular fieldbus interfaces CANopen /DeviceNet/EtherCAT/EtherNet-IP
Rotary Measurement Technology Absolute Encoders, Singleturn
-20 to 85 C High rotational speed Temperature Shock/ vibration resistant Short-circuit proof Reverse polarity protection Rugged Highest shock resistance on the market: ( 200 g (2,500 m/s 2 )), 6 ms acc.
Incremental Encoder with Hollow Shaft
Incremental Encoder Type RI 36-H n miniature industry encoder for high number of pulses n short mounting length n easy mounting procedure n Application e.g.: - Motors - Machine tools - Packaging Machines
TECHNICAL DATASHEET Heavy Duty - Absolute Encoder AR 62/63
AR 6 Single and Multi turn: Resolution up to 8 Bit Wearless electronic multi turn: contact -and battery less, self-energetic 300 N axial and radial load 00 g shock resistance/ 0 g vibration resistance
ABSOLUTE OPTICAL ROTARY ENCODER SINGLETURN BIT PARALLEL
Main Features - Compact and Heavy-Duty Industrial Model - Interface: Bit Parallel, Push Pull, Short Circuit Proof Housing: 58 mm - Shaft: 6 or 10 mm hollow- 15 mm - Resolution: Max. 16 Bit = 65,56 Steps
Encoder WDG 115T - Discontinued product
Encoder WDG T Discontinued product www.wachendorffautomation.com/wdgt Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and
Multiturn absolute encoder
Release date: 207-0-2 :0 Date of issue: 207-0-2 t79_eng.xml Model Number Features Industrial standard housing Ø58 mm PROFINET IRT 0 Bit multiturn Servo or clamping flange Network loop through by means
Absolute Encoder Multiturn
Absolute Encoder Multiturn Features Resolution: Singleturn: up to 16,384 (14 Bit) steps per revolution Multiturn: up to 16,777,216 (24 Bit) revolutions Interface: SSI (synchron serial interface) or BiSS
Technical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 130 a at 40 C Mission Time (T M ) L 10
Model Number Features Solid shaft 0 Bit multiturn Free of wear magnetic sampling High resolution and accuracy Mechanical compatibility with all major encoders with fieldbus interface Status LEDs Description
NOVOHALL Rotary Sensor touchless transmissiv. Series RFC4800 SSI, SPI, Incremental
NOVOHALL Rotary Sensor touchless transmissiv Series RFC4800 SSI, SPI, Incremental The sensor utilizes the orientation of a magnetic field for the determination of the actual position. Therefore, a magnet
ENC-CKP58-H-PROG-ZCW-4-06-A-L1
IP58/IP58S/CKP58 Programmable Incremental Encoders FEATURES Programmable Incremental Encoder Resolution from 1 to 65536 PPR Voltage 5 VDC or 10-30 VDC Push-Pull and Line Driver Compatible Output IP 65
Encoder WDG 40E.
Encoder WDG 0E www.wachendorffautomation.com/wdg0e Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions
ENCODER. Profibus Multiturn. Series , Key-Features:
ENCODER Profibus Multiturn Series 8.5868, 8.5888 Key-Features: Content: Order Code Technical Data Profibus Interface Connection Technical Drawing......3...4...4...5 - Solid shaft: maximum diameter 0 mm
Encoder WDG 40A.
Encoder WDG 0 www.wachendorffautomation.com/wdg0a Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions
Encoder WDG 40A.
Encoder WDG 0 www.wachendorffautomation.com/wdg0a Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions
TECHNICAL DATASHEET Absolute Encoder AC 58 - CANlayer2
Diagnostic LED Poll and auto mode Programmable: Direction, limit values Option: Display "tico" Clamping flange TECHNICAL DATA mechanical Housing diameter 58 mm Shaft diameter 6 mm / 10 mm (Solid shaft)
TECHNICAL DATASHEET Incremental Encoder RI 58-F
Incremental hollow shaft encoder Up to 10 000 ppr Through hollow shaft and hubshaft up to 12 mm (14 mm optional) Optimized stator coupling Applications: Feedback for asynchronous motors, industrial applications
ABSOLUTE ROTARY ENCODER PROFIBUS-DP
Main Features - Compact and heavy-duty industrial model - Certified: By Profibus Trade Org., CE - Interface: Profibus-DP - DPV2-Functionality - Housing: 58 mm - Full or hollow shaft: 6 or 10 mm / 15 mm
AKS16 Absolute Magnetic Sensing Head
Measuring Positioning KS1 bsolute Magnetic Sensing ead - Rotary applications - Linear applications - Non-contact, quick position measurement Features Lower case incremental 1 to 18 it absolute resolution
Product Information. ECI 119 Absolute Rotary Encoder
Product Information ECI 119 Absolute Rotary Encoder November 2010 ECI 119 Rotary encoders without integral bearing for integration in motors Hollow through shaft 50 mm Inductive scanning principle A =
More Precision. wiresensor // Draw-wire displacement sensors
More Precision wiresensor // Draw-wire displacement sensors 30 Industrial draw-wire sensors wiresensor P60 analog - Robust aluminum profile housing - Customized versions for OEM - Potentiometer, current
Rotary Measuring Technology
Multiturn Type 8 Profibus-DP Very compact (only 87.8 mm installation depth); Ideal for dynamic applications thanks to its non-contact multiturn stage Solid shaft or blind hollow shaft Long service life
Encoder WDG 115T.
Encoder WDG T www.wachendorffautomation.com/wdgt Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions
EAM PARALLEL - SSI MULTITURN ABSOLUTE ENCODER
EAM PARALLEL - SSI MULTITURN ABSOLUTE ENCODER ABSOLUTE MULTITURN PARALLEL ENCODER DESCRIPTION This series is designed for application where a very high precision is required, even also on extended linear
Technical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 480 a at 40 C Mission Time (T M ) L 10
Model Number Features Very small housing Up to 31 bit overall resolution CANopen interface Free of wear magnetic sampling High resolution and accuracy Description This absolute rotary encoder provides
Product Information. ECN 1023 EQN 1035 Rotary Encoders with EnDat 2.2 for Safety-Related Applications
Product Information ECN 1023 EQN 1035 Rotary Encoders with EnDat 2.2 for Safety-Related Applications January 2009 ECN 1023/EQN 1035 Series Rotary encoders for safety-related applications With integral
ABSOLUTE ROTARY ENCODER INTERBUS
Main Features - Compact and heavy duty industrial model - Interface: Remote-Bus - ENCOM-Profile: K3 (programmable) - Housing: 58 mm - Shaft: 6 or 10 mm, hollow- 15 mm - Resolution: max. 25 Bit = 33,554,432
Encoder WDG 58B.
Encoder WDG www.wachendorffautomation.com/wdgb Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions Maximum
Encoder WDG 63Q.
Encoder WDG Q www.wachendorffautomation.com/wdgq Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions
Time Counters mini "h", DC Version
Type 633-DC Time Counters mini "h", DC Version Type 633.0 Type 633.7 Type 633.8 High shock resistance Miniature dimensions Electrical connections in standard grid Suitable for PCB mounting Machine-solderable
Absolute Shaft Encoders ACURO industry
Compact design Aids for start up and operation: diagnostic LED, preset key * with optical response, status information Output Tristate short circuit-proof Gray or Binary code Encoder monitoring Synchro
NOVOHALL Rotary Sensor non-contacting. Series RSB-3600 Series RMB-3600
NOVOHALL Rotary Sensor non-contacting Series RSB-3600 Series RMB-3600 Special features Non-contacting, hall technology Measuring range up to 5760 Single- and multiturn True-power-on system: counts turns
Standard PROFINET IO. RoHS. High shaft load capacity. High protection level. Flexible
The encoders Sendix 5868 and 5888 with PROFINET interface and optical sensor technology are ideal for use in all applications with PROFINET technology. The encoder supports the isochronous (IRT) mode and
Product Information ROC 425 ROQ 437. Absolute Rotary Encoders with EnDat 2.2 for Safety-Related Applications
Product Information ROC 425 ROQ 437 Absolute Rotary Encoders with EnDat 2.2 for Safety-Related Applications 10/2016 ROC 425, ROQ 437 with synchro flange Rotary encoders for absolute position values with
Absolute Encoders Multiturn
The multiturn encoders 5868 and 5888 with interface and optical sensor technology are ideal for use in all applications with a interface. The encoder supports the isochronous (IRT) mode and is therefore
Technical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 480 a at 40 C Mission Time (T M ) L 10
Model Number Features Solid shaft Up to 31 bit overall resolution CANopen interface Free of wear magnetic sampling High resolution and accuracy Highly shock / vibration and soiling resistant Sturdy construction
Absolute Encoders. SSI & BiSS. CANopen CANlift
Absolute Encoders SSI & BiSS Profibus -DP CANopen CANlift www.turck.com www.turck.com Kübler by TURCK Absolute Encoders Safety-Lock Sendix Absolute with Fieldbus Interface Singleturn, Multiturn - with
Absolute Encoders Multiturn
The Sendix multiturn encoders 5868 and 5888 with CANopen or CANlift interface and optical sensor technology are the right encoders for all CANopen or CANlift applications. With a maximum resolution of
Sense it! Connect it! Bus it! Solve it! ENCODERS
Sense it! Connect it! Bus it! Solve it! ENCODERS Incremental encoders Incremental encoders use electrical pulses to measure rotation speed or position. The dual-channel incremental encoders of the Ri series,
Rotary Measurement Technology Absolute Encoders, Multiturn
-40 to 80 C IP Mechanical drive Safety-LockTM High rotational speed Temperature High IP High shaft load capacity Shock/ vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection