4 4HDMI Matrix With 4 Cat 5e/6 Extender Outputs, Bi-Direction IR&Power over UTP

Transcription

1 HDMI Matrix With Cat 5e/6 Extender Outputs, Bi-Direction IR&Power over UTP 287

2

3 SAFETY AND NOTICE HDMI Matrix With Cat 5e/6 Extender Outputs, Bi-Direction IR&Power over UTP,has been tested for conformity to safety regulations and requirements, and been certified for international use. however, like all electronic equipment,the JTD-ID:287 should be used with care. please read and follow the safety instruction to protect yourself from possible injury and to minimize the risk of damage to the unit. PRODUCT INTRODUCTION 2 OPERATION INSTRUCTION 6-12 TROUBLE SHOOTING 1 APPENDIX-A GUI USER GUID 1-2

4 INTRODUCTION Product model and standard: HDMI x single Cat5e/6 extender output HD video matrix, which can accept HD HDMI signal inputs, as well HD HDMI and Cat5e/6 RJ5 outputs can select any one of video inputs. This x matrix can support maximum 1080p D or 1080p 60fs resolution, and also include a x dual direction IR matrix companion with video matrix extender output. The x HDMI matrix is fully compatible with HDMI 1.c (HDMI 1. D) and HDCP 1.. 1

5 IRIn IRIn IRIn IRIn APPLICATION CONFIG IRINPUT MadeInChina A B C D 1 2 UTPOUTD UTPOUTC HDMIOUTC HDMIIN HDMIIN HDMIIN2 HDMIIN1 HDMIOUTB UTPOUTB UTPOUTA HDMIOUTA Transmi ter Transmi ter HDMIOut HDMIOut Power/Video Power/Video Receiver HDMI IRReceiver IRTransmitter IRReceiver TV HDMIOUTD RS22 Transmi ter Power/Video HDMI Receiver HDMIOver CAT5e/6 IRTransmitter HDMIOut TV HDMIOver HDMIOver HDMIOver CAT5e/6 CAT5e/6 CAT5e/6 Transmi ter HDMIOut Power/Video Receiver HDMI IRTransmitter TV Receiver HDMI IRReceiver IRTransmitter PlayerIRController PlayerIRController IROUTPUT LEVEL IRReceiver Blue-rayPlayer MIN MAX LEVEL MIN MAX Blue-rayPlayer HDSTB GameBOX TV LEVEL LEVEL PlayerIRController IRReceiver IRReceiver IRReceiver PlayerIRController 2 LAN DC12V IRReceiver

6 SPECIFICATION&PACKAGE CONTENTS Interface Power consumption Dimension Net weight Input/Output Video formats HD interface standard Input Video SignalAmplitude Input DDC Signal HDMI Input/output audio formats HDMI input/output cable distance Extender output resolution and distance Indicators IR frequency ESD level Temperature range Compliance Package Contents HDMI input ports(female type A); HDMI outputs (female type A); CAT5e/6 extender outputs (RJ5); IR outputs (.5mm); IR inputs (.5mm);RS22 series port(db9); LAN port (RJ5); 12V DC in (Ø) <2W when the function of power over UTP of extender outputs are on. (L x W x H): mm (no including mm height rubber pad) 2.28kg per unit HDMI V1., 1080p/1080i/720p/576p/576i/80p/80i HDMI 1. standard (HDMI 1. D function), HDCP 1., EDID volts p-p 5 volts p-p (TTL) PCM, Dolby -AC, DTS 7.1, DSD,Maximum 8 channels 15m (26 AWG, and can be extended with amplifier in most cases) 1080P 170ft (50meters)-CAT5e/ 20ft (70meters)-CAT6 720P/1080i 20ft (70meters)-CAT5e/ 00ft (90meters)-CAT6 Power-Green, Extender output connected status-yellow, Matrix Status-Yellow Wide frequency 20-60kHz HBM ± kv(contact discharge) 0~0 C (operation), -20~60 C(stock) FCC CE 1 unit HDMI x matrix 1 unit DC 12V A adapter 1 IR remote controller IR extension transmitter cable(m) IR extension receiver cable(m) 1 user manual

7 IR DC12V A UTPOUTPUTSTATUS LAN B C D RS22 HDMIOUTPUTSTATUS A B C D HDMIOUTD UTPOUTD INPUTSTATUS INPUTSTATUS INPUTSTATUS INPUTSTATUS UTPOUTC OUTPUT A OUTPUT B OUTPUT C OUTPUT D HDMIOUTC 1 1 CONFIG HDMIIN IRINPUT 1 2 IROUTPUT A B C D POWER MadeInChina ON/OFF HDMIIN HDMIIN2 HDMIIN1 HDMIOUTB UTPOUTB UTPOUTA HDMIOUTA PRODUCT INTRODUCTION Input ports and output ports: ) Local IR receiver window 2)UTP extenderreceiverlinkstatus )Selected source indictors forhdmioutput A, B, C and D 5)Output selection buttons forhdmioutput A, B, C and D 6)Power status indicator 7)Power switch 8)12VDCinput 9)Local 100M LANEthernet port 10)LocalRS22 series port 11)HDMIoutput ports 12)UTPvideo output ports 1)CONFIGDIPswitch 1)IRextension transmitter outputs 15)IRextension receiver inputs 16)HDMIinput ports

8 Typical installation instruction 5

9 OPERATION INSTRUCTION HDMI Matrix: The product has HDMI input, and HDMI/UTP output, and all HDMI ports support HDMI 1. standard. HDMI/UTP outputs can select any one of HDMI different inputs, or same HDMI inputs. The user can control x matrix by front panel button, local IR remote, RS22 or local 100M LAN Ethernet port. Frout Panel Control: OUTPUT SELECTION button A to D can be used to select one of HDMI input to HDMI/UTP output A to D. INPUT STATUS INPUT STATUS INPUT STATUS INPUT STATUS OUTPUT A OUTPUT B OUTPUT C OUTPUT D

10 OPERATION INSTRUCTION A 1 2 B 1 2 C 1 2 D 1 2 7

11 LEVEL MIN LEVEL MAX CONFIG HDMIOUTD UTPOUTD UTPOUTC HDMIOUTC HDMIIN LEVEL MIN LEVEL MAX IRINPUT 1 2 LEVEL IROUTPUT A B C D MIN MadeInChina HDMIIN HDMIIN2 HDMIIN1 HDMIOUTB UTPOUTB UTPOUTA HDMIOUTA LEVEL MAX LEVEL MIN LEVEL MAX OPERATION INSTRUCTION Local IR matrix means IR transmission path is between local IR IN and OUT which is located in matrix s IR IN/OUT socket. HDMISource HDMISource HDMISource 2 HDMISource 1 IRemitter B IRemitter A HDMISink HDMISink HDMISink 2 HDMISink 1 8

12 OPERATION INSTRUCTION SWITCH ON OFF(Default) NUMBER Choose the higher definition display terminal s Choose the lower definition display terminal s 1 EDID forward to source EDID forward to source 2 Power over UTP function is ON Power over UTP function is OFF EDID dynamic selection will be done only EDID dynamic selection will be done only with two sinks connected to same source Local IR matrix is ON; Remote IR matrix is OFFLocal IR matrix is OFF; Remote IR matrix is ON 5 Reserved Reserved 9

13 OPERATION INSTRUCTION The x matrix has internal EDID function,support HDMI display terminal, EDID dynamic selection when each 2 HDMI display terminals choose the same HDMI source. There are two different EDID dynamic selection modes, one is to choosethe lower definition EDID as current EDID, and the other is to choose the higher definition EDID as current EDID. The user can set CON-FIG switch 1 to select EDID mode, when CONFIG switch 1 is set as off (default mode), the matrix will choose the lower definition HDMI display termi-nal EDID, when CONFIG switch 1 is set as on, the matrix will choose the higher definition HDMI display termianl EDID. For example, One TV is 1080P, the other is 1080i. The CONFIG switch 1 is set as OFF, the selected EDID will be 1080i, When 2 HDMI display terminal choosedifferent HDMI sources, the matrix just forward connected HDMI display terminal EDID to selected source, and don t change anything. This function is to keep maximum compatibility and flexibility. CONFIG IRINPUT IROUTPUT 1 2 A B C D MadeInChina HDMIOUTD UTPOUTD UTPOUTC HDMIOUTC HDMIIN HDMIIN HDMIIN2 HDMIIN1 HDMIOUTB UTPOUTB UTPOUTA HDMIOUTA 10

14 OPERATION INSTRUCTION which can make sure UTP extender receivers get the power from the UTP output ports without DC adapters. Please note that UTP extender receivers must also support power over UTP and get the matched UTP extender receiver model for this function.this power over UTP function should be turned on when set CONFIG switch 2 to ON, and default status is OFF. 11

15 OPERATION INSTRUCTION TIA/EIA-568B, refer to below pin definition. T5eorCAT6 Ethernet cables, Storage conditions Products storage temperature should be -20 C~60 C. For long time storage requirement, please use original carbon boxes, and avoid from high humid, acid base or dusty place. Maintenance 12

16 TROUBLE SHOOTING 1

17 APPENDIX-A GUI USER GUIDE Input Selection and Mapping 1) I/O: Select the input Click Send to change the I/O setting 2)Save Mapping: Select Mapping(1-8) )Preset mapping: Select Mapping(1-8) Click Send buttontorecallpreviousmappingwhicharesaved 1

18 APPENDIX-A GUI USER GUIDE Rename I/O Button 1) Rename I/O: Rename output name Rename input name 2) Rename Mapping: Rename Mapping name 15

19 APPENDIX-A GUI USER GUIDE 16

20 APPENDIX-A GUI USER GUIDE EDID Button Clik"View/Create"button,display"EDID Analysis" popup menu 17

21 APPENDIX-A GUI USER GUIDE NETWORK 18

22 APPENDIX-A GUI USER GUIDE 19

23 APPENDIX-A GUI USER GUIDE 20

24 APPENDIX-A GUI USER GUIDE 6) When matrix is power on, Update is working; Progress bar will show the update progress; Status bar will show Update successfully once update is completed 21

25 APPENDIX-A GUI USER GUIDE 22

26 APPENDIX-A GUI USER GUIDE Click button to change connection status, it will toggle between connect and disconnect status. Click button, Open the user manual document. 2

27 DC12V LAN RS22 HDMIOUTD UTPOUTD UTPOUTC HDMIOUTC 5 CONFIG HDMIIN IRINPUT 1 2 IROUTPUT A B C D MadeInChina HDMIIN HDMIIN2 HDMIIN1 HDMIOUTB UTPOUTB UTPOUTA HDMIOUTA CONTROL THE MATRIX BY IP LAN1 LAN2 Smartphone Cat 5e/6 Matrix Cat 5e/6 PC 2

28