Tubular Drives and Mechanical Accessories. Product Catalogue

Size: px
Start display at page:

Download "Tubular Drives and Mechanical Accessories. Product Catalogue"

Transcription

1 Tubular Drives and Mechanical Accessories Product Catalogue

2 The data contained in this catalogue is intended for information purposes and is given in good faith. No liability may be derived therefrom. The informa tion and illustrations are not binding and were correct to the best of our knowledge at the time of print. Becker- Antriebe reserves the right to modify dimensions and technical data. As of: 10/2007 Item No.: Today's requirements for house and building automation cannot always be fulfilled by standard drives. For more complex jobs BECKER offers a comprehensive range of "SMI" drives (with electronic limit switches). These drives dispose of special electronics, which, combined with the SMI-actor, constitute an interface to the KNX/EIB bus system. They offer unknown functions, such as giving feedback of the current position, which allows a visualisation on a touchscreen. Please ask for our SMI folder to find out more about this exciting technology.

3 No drive? Then Becker has just the right thing for you! Top-quality customer care at the push of a button! Regardless of whether it s a tubular drive for roller shutters, sun protection systems or a drive for your garage door if you wish to make your life more pleasant with pushbutton or programme-controlled drive systems for your roller shutters, sun protection systems and doors, Becker-Antriebe GmbH provides competent solutions you can rely on. Over 8 decades ago, brothers Emil and Adolf Becker founded a mechanical workshop in the region of Hessen which has since developed into a successful international enterprise. More than 80 years of experience have shown that at Becker quality is not merely a means to an end, but an enduring corporate philosophy. It is therefore no surprise that the improved tubular drives and control systems from Becker meet even the highest of demands, convincing customers with their extraordinary performance and reliability. Moreover, Becker systems ensure that your roller shutters and sun protection systems offer a maximum in user-friendliness and easy operability: fully automatic systems which render bothersome shutter belts unnecessary come as wired or wireless systems and are operated at the touch of a button or via timers. It couldn t be easier! Thanks to the innovative drives from Becker, you no longer need to extend your sunshade awnings with a hand crank. And with a suitable control system for your drive, you don t have to leave the comfort of your lounger to retract your awnings if the wind gets strong for your control system will automatically do it for you. In fact, you don t even have to be at home! With Becker drives, frequent use of roller shutters is child s play. And many facts are testimony to this: in summer any rooms which have large window areas will not heat up unnecessarily, whilst in winter roller shutters can reduce heating costs by up to one third a fact that is compatible with both your wallet and the environment. What s more, roller shutters keep out both unwanted eyes and even unwanted visitors for the intelligent tubular drives from Becker will automatically open and close your shutters every day when no one is at home, with the additional option of variable daily switching times. And you can simply relax, take it easy and enjoy all of these benefits! It therefore comes as no surprise that the well-known enterprise Becker-Antriebe GmbH has gained a strong foothold on the market. Excellent know-how, consistent improvements and convincing innovations form the firm basis of the company s strong position. And to reinforce this position, Becker offers its professional partners a full-service package that includes professional consultation and training programmes, plus other attractive extras. Don t miss out! 3

4 Contents Overview of Limit Switch Types Roller Shutter and Sun Protection Applications Tubular Drives with Mechanical Limit Switches for winding shafts from Ø 38 mm for winding shafts from Ø 50 mm for winding shafts from Ø 63 mm Tubular Drives with Hand Crank Connection for winding shafts from Ø 50 mm for winding shafts from Ø 63 mm Roller Shutter Applications Tubular Drives with Electronic Limit Switches for winding shafts from Ø 38 mm for winding shafts from Ø 50 mm Tubular Drives with Integrated Radio Receiver for winding shafts from Ø 38 mm for winding shafts from Ø 50 mm Sun Protection Applications Tubular Drives with Electronic Limit Switches for winding shafts from Ø 38 mm for winding shafts from Ø 50 mm for winding shafts from Ø 63 mm Tubular Drives with Electronic Limit Switches for Screens for winding shafts from Ø mm Tubular Drives with Integrated Radio Receiver for winding shafts from Ø 38 mm for winding shafts from Ø 50 mm for winding shafts from Ø 63 mm Special Applications D.C. Drives for winding shafts from Ø 63 mm Load Table Centronic Overview

5 Mechanical Accessories Drive Adapters, Rings and Counter Brackets Setting Tools Suspension Springs Rigid Safety Springs Anti-Lift Devices Connecting Elements Types P5/16 - P13/ Types R8/17 - R50/ Types R44/14 - R120/ Wall Bracket Plates and Awning Plates Types P5/16 - P13/9 and R8/17 - R50/ Box Brackets and System Brackets Types P5/16 - P13/9 and R8/17 - R50/ Wall Bracket Plates and Awning Plates Types R44/14 - R120/ Universal Wall Brackets for all model series Safety Brakes for Roller Shutters and Doors Safety Brakes, Shaft Bolts, Mounting Plates Accessories for Tubular Drives with Hand Crank Connection, Types R12/17HK - R120/11HK Eyes with Hexagonal Bar, Extensions Rocker Bearing with Hexagonal Bar Pivoting Crank Awning Crank and Connecting Elements Bracket Plates, Adapters and Bearings Wall Bearing Plates Order form Tubular Drive Mechanical Accessories General Terms and Conditions of Sale Possible Combinations of Connecting Elements and Wall Brackets

6 Overview of limit switch types R+S Type of limit switches Roller shutter Sun protection M HK R R+ PR+ PRF+ PS PS+ PSF PSF+ SE Mechanical limit switching Mechanical limit switching with hand crank operation Electronic limit switching with obstruction detection Electronic limit switching with obstruction detection, anti-lifting safety mode Electronic limit switching point to point, jamming detection, anti-lifting safety mode Electronic limit switching with radio 1) point to point, jamming detection, anti-lifting safety mode Electronic limit switching 1) with or without stoppers Electronic limit switching 1) higher closing force for cassette awnings Electronic limit switching with radio control 1) Electronic limit switching with radio control 1) higher closing force for cassette awnings Electronic limit switching with locking function for screens Type: P (Ø 35 mm) Octagonal shaft: starting from 40 mm Round shaft starting from: Ø 38x1 mm P5/16 P5/20 P5/30 P9/16 P13/9 Type: R (Ø 45 mm) Octagonal shaft: starting from 50 mm Round shaft starting from Ø 50x1,5 mm R8/17 R12/17 R15/17 R20/17 R25/17 R30/17 R40/17 R50/17 Type: R (Ø 58 mm) Octagonal shaft: starting from 70 mm Round shaft starting from Ø 63x1,5mm R44/14 R50/17 R60/11 R70/17 R80/11 R120/11 1) No installation set required! 6

7 G DC drives GHK Mechanical limit switching Mechanical limit switching with hand crank connection Connecting voltage (DC) Type: R (Ø 58 mm) Octagonal shaft: starting from 70 mm Round shaft starting from: Ø 63x1,5 mm R35/8 12 Volt R60/8 24 Volt R120/3 24 Volt 7

8 Roller shutter and sun protection applications P5/20M-P13/9M Tubular drives with mechanical limit switches for winding shafts from Ø 38 mm Multi-purpose tubular drive featuring precision mechanical limit switches Quiet, smooth operation Easy setting of final positions Overheat protection for motor Shutter/screen/cloth can be wound up around motor head For roller shutter and sun protection applications Technical data Driving torque 5 / 9 / 13 Nm Output speed P5 20 min -1, P5 30 min -1 Limit switch range Nominal voltage Type of operation Protection rating Connection cable Item number Name P9 16 min -1 P13 9 min revolutions 230V AC/50Hz S2 4 min IP44 3 m Nominal Power consumption current (A) (W) P5/20M P5/30M P9/16M P13/9M Suitable for left and right-hand installation No extra storage space required due to different types of drives No fixed buffers required for operation No stoppers in visible area Easy setting of final positions No special tools required to set final positions Flexible installation tool for final positions Precise final position settings even in non-easy access constructional designs For use in roller shutter and sun protection applications No extra storage space required due to different types of drives Shutter/screen/cloth can be wound up around motor head Suitable for use in applications with even very limited space Can be combined with many Becker wall brackets Adaptable to multiple applications Overheat protection for motor In the event of overheating, the temperature sensor will automatically switch off the motor to prevent damage to motor and shutter Each drive is being tested for its performance, insulation value, braking power and limit switch accuracy, this guarantees highest quality for our products. 8

9 Dimensions Designation a (mm) b (mm) c (mm) d (mm) e (mm) P5/20M P5/30M P9/16M P13/9M Order data Designation Torque (Nm) Output speed (min -1 ) Item number P5/20M P5/30M P9/16M P13/9M Tubular drives Designation Torque (Nm) Output speed (min -1 ) Item number P5/20M with bracket P5/30M with bracket P9/16M with bracket P13/9M with bracket Mechanical accessories can be found in the chapter with the same title starting on page 49. Possible combinations of connecting elements and wall brackets can be found at the end of this catalogue. Please find a load table on page 46. An overview of our radio controls can be found on page 47 of this catalogue. 9

10 Roller shutter and sun protection applications R8/17M R50/11M Tubular drives with mechanical limit switches for winding shafts from Ø 50 mm Multi-purpose tubular drive featuring precision mechanical limit switches Quiet, smooth operation Easy setting of final positions Overheat protection for motor Shutter/screen/cloth can be wound up around motor head For roller shutter and sun protection applications Technical data Driving torque 8 / 12 / 15 / 20 / 25 / 30 / 37 / 50 Nm Output speed R8 to R40 17 min -1 R50 11 min -1 Limit switch range 38 revolutions Nominal voltage 230V AC/50Hz Type of operation S2 4 min Protection rating IP44 Connection cable 3 m Item number Name Nominal Power consumption (W) current (A) R8/17M R12/17M R15/17M R20/17M R25/17M R30/17M R40/17M R50/11M Suitable for left and right-hand installation No extra storage space required due to different types of drives No fixed buffers required for operation No stoppers in visible area Easy setting of final positions No special tools required to set final positions Flexible installation tool for final positions Precise final position settings even in non-easy access constructional designs For use in roller shutter and sun protection applications No extra storage space required due to different types of drives Shutter/screen/cloth can be wound up around motor head Suitable for use in applications with even very limited space Can be combined with many Becker wall brackets Adaptable to multiple applications Overheat protection for motor In the event of overheating, the temperature sensor will automatically switch off the motor to prevent damage to motor and shutter Each drive is being tested for its performance, insulation value, braking power and limit switch accuracy, this guarantees highest quality for our products. 10

11 Dimensions Designation a (mm) b (mm) c (mm) d (mm) e (mm) R8/17M R12/17M R15/17M R20/17M R25/17M R30/17M R40/17M R50/11M Order data Designation Torque (Nm) Output speed (min -1 ) Item number R8/17M R12/17M R15/17M R20/17M R25/17M R30/17M R40/17M R50/11M Mechanical accessories can be found in the chapter with the same title starting on page 49. Possible combinations of connecting elements and wall brackets can be found at the end of this catalogue. Please find a load table on page 46. An overview of our radio controls can be found on page 47 of this catalogue. 11

12 Roller shutter and sun protection applications R44/14M R120/11M Tubular drives with mechanical limit switches for winding shafts from Ø 63 mm Multi-purpose tubular drive featuring precision mechanical limit switches Quiet, smooth operation Easy setting of final positions Overheat protection for motor Shutter/screen/cloth can be wound up around motor head For roller shutter and sun protection applications Technical data Driving torque 44 / 50 / 60 / 70 / 80 / 120 Nm Output speed R44 14 min -1 R50 and R70 17 min -1 R60, R80 and R min -1 Limit switch range 36 revolutions Nominal voltage 230V AC/50Hz Type of operation S2 4 min Protection rating IP44 Connection cable 3 m Item number Name Nominal Power consumption (W) current (A) R44/14M R50/17M R60/11M R70/17M R80/11M R120/11M Suitable for left and right-hand installation No extra storage space required due to different types of drives No fixed buffers required for operation No stoppers in visible area Easy setting of final positions No special tools required to set final positions Flexible installation tool for final positions Precise final position settings even in non-easy access constructional designs For use in roller shutter and sun protection applications No extra storage space required due to different types of drives Shutter/screen/cloth can be wound up around motor head Suitable for use in applications with even very limited space Can be combined with many Becker wall brackets Adaptable to multiple applications Overheat protection for motor In the event of overheating, the temperature sensor will automatically switch off the motor to prevent damage to motor and shutter Each drive is being tested for its performance, insulation value, braking power and limit switch accuracy, this guarantees highest quality for our products. 12

13 Dimensions Designation a (mm) b (mm) c (mm) d (mm) e (mm) R44/14M R50/17M R60/11M R70/17M R80/11M R120/11M Order data Designation Torque (Nm) Output speed (min -1 ) Item number R44/14M R50/17M R60/11M R70/17M R80/11M R120/11M Mechanical accessories can be found in the chapter with the same title starting on page 49. Possible combinations of connecting elements and wall brackets can be found at the end of this catalogue. Please find a load table on page 46. An overview of our radio controls can be found on page 47 of this catalogue. 13

14 Roller shutter and sun protection applications R12/17HK R50/11HK Tubular drives with hand crank connection for winding shafts from Ø 50 mm Multi-purpose tubular drive with hand crank connection and precision mechanical limit switches Compact motor head with hand crank connection Final positions can be set from 2 sides Quiet, smooth operation Easy setting of final positions Overheat protection for motor Suitable for use with roller shutters, roller doors and sun protection systems Technical data Driving torque 12 / 15 / 20 / 25 / 30 / 37 / 50 Nm Output speed R12 to R40 17 min 1 R50 11 min 1 Limit switch range 38 revolutions Nominal voltage 230V AC/50Hz Type of operation S2 4 min Protection rating IP44 Connection cable 3 m Item number Name Nominal Power consumption (W) current (A) R12/17HK R15/17HK R20/17HK R25/17HK R30/17HK R40/17HK R50/11HK Integrated hand crank connection System can be opened or closed manually, e.g. in the event of power outage Hand crank can be fitted at both ends Suitable for use in various construction designs Suitable for left and right-hand installation No extra storage space required due to different types of drives Compact motor head design Suitable for use in applications with even very limited space Easy setting of final positions from 2 sides No special tools required to set final positions Final positions can be easily set even in non-easy access constructional designs Flexible installation tool for final positions Tool for precise final position settings even in non-easy access constructional designs For use in roller shutter, roller door and sun protection applications No extra storage space required due to different types of drives Overheat protection for motor In the event of overheating, the temperature sensor will automatically switch off the motor to prevent damage to motor and shutter/screen/cloth No fixed buffers required for operation No stoppers in visible area Each drive is being tested for its performance, insulation value, braking power and limit switch accuracy, this guarantees highest quality for our products. 14

15 Dimensions Designation a (mm) b (mm) c (mm) d (mm) e (mm) R12/17HK R15/17HK R20/17HK R25/17HK R30/17HK R40/17HK R50/11HK Order data Designation Torque (Nm) Output speed (min -1 ) Item number R12/17HK R15/17HK R20/17HK R25/17HK R30/17HK R40/17HK R50/11HK Mechanical accessories can be found in the chapter with the same title starting on page 49. Possible combinations of connecting elements and wall brackets can be found at the end of this catalogue. Please find a load table on page 46. An overview of our radio controls can be found on page 47 of this catalogue. 15

16 Roller shutter and sun protection applications R44/14HK R120/11HK Tubular drives with hand crank connection for winding shafts from Ø 63 mm Multi-purpose tubular drive with hand crank and precision mechanical limit switches Compact motor head with hand crank connection Final positions can be set from 2 sides Quiet, smooth operation Easy setting of final positions Overheat protection for motor Suitable for use with roller shutters, roller doors and sun protection systems Technical data Driving torque 44 / 50 / 60 / 70 / 80 / 120 Nm Output speed R44 14 min 1, R50 and R70 17 min 1, R60, R80 and R min 1 Limit switch range 38 revolutions Nominal voltage 230V AC/50Hz Type of operation S2 4 min Protection rating IP44 Connection cable 3m Item number Name Nominal Power consumption (W) current (A) R44/14HK R50/17HK R60/11HK R70/17HK R80/11HK R120/11HK Integrated hand crank connection System can be opened or closed manually, e.g. in the event of power outage Hand crank can be fitted at both ends Suitable for use in various construction designs Suitable for left and right-hand installation No extra storage space required due to different types of drives No fixed buffers required for operation No stoppers in visible area Easy setting of final positions from 2 sides No special tools required to set final positions Final positions can be easily set even in non-easy access constructional designs Flexible installation tool for final positions Tool for precise final position settings even in non-easy access constructional designs For use in roller shutter, roller door and sun protection applications No extra storage space required due to different types of drives Overheat protection for motor In the event of overheating, the temperature sensor will automatically switch off the motor to prevent damage to motor and shutter/screen/cloth Compact hand crank design Suitable for use in applications with even very limited space Easy-mount mounting pins No special tools required to fit or remove mounting pins Each drive is being tested for its performance, insulation value, braking power and limit switch accuracy, this guarantees highest quality for our products. 16

17 Dimensions Designation a (mm) b (mm) c (mm) d (mm) e (mm) R44/14HK R50/17HK R60/11HK R70/17HK R80/11HK R120/11HK Order data Designation Torque (Nm) Output speed (min -1 ) Item number R44/14HK R50/17HK R60/11HK R70/17HK R80/11HK R120/11HK Mechanical accessories can be found in the chapter with the same title starting on page 49. Possible combinations of connecting elements and wall brackets can be found at the end of this catalogue. Please find a load table on page 46. An overview of our radio controls can be found on page 47 of this catalogue. 17

18 Roller shutter applications P5/16R+ P9/16R+ Tubular drives with electronic limit switches for winding shafts from Ø 38 mm Intelligent roller shutter drive with automatic shutter length adjustment for roller shutters with or without anti-lifting device Quiet, smooth operation For use with or without anti-lifting device Automatic switch-off in the event of jamming (e.g. due to frozen shutter) Automatic shutter length adjustment Parallel switching possible without cut-off relay Technical data Driving torque 5 / 9 Nm Output speed P5 16 min -1 P5 20 min -1 P9 16 min -1 Limit switch range 64 revolutions Nominal voltage 230V AC/50Hz Type of operation S2 4 min Protection rating IP44 Connection cable 3 m Item number Name Nominal Power consumption (W) current (A) P5/16R P5/20R P9/16R Automatic shutter length adjustment Identical appearance when shutters are open No change in position due to influencing factors such as temperature Suitable for roller shutters with or without anti-lifting device No extra storage space required due to different types of drives Automatic anti-lift device detection Roller shutter is pushed down to prevent break-ins Jam detection in the event of frozen shutter slats Roller shutter is protected from damage caused by overload Parallel switching possible without additional cut-off relay No additional costs, no extra work and no extra space requirements for cut-off relay Suitable for left and right-hand installation No extra storage space required due to different types of drives Soft upper buffer Less loading on shutter and buffer thanks to constant adjustment of the forces acting on the buffer Shutter curtain can be wound up around motor head Suitable for use in applications with even very limited space Overheat protection for motor In the event of overheating, the temperature sensor will automatically switch off the motor to prevent damage to motor and shutter Each drive is being tested for its performance, insulation value, braking power and limit switch accuracy, this guarantees highest quality for our products. 18

19 Dimensions Designation a (mm) b (mm) c (mm) d (mm) e (mm) P5/16R P5/20R P9/16R Order data Designation Torque (Nm) Output speed (min -1 ) Item number P5/16R P5/20R P9/16R Order data Designation Torque (Nm) Output speed (min -1 ) P5/16R+ with bracket P5/20R+ with bracket P9/16R+ with bracket Mechanical accessories can be found in the chapter with the same title starting on page 49. Possible combinations of connecting elements and wall brackets can be found at the end of this catalogue. Please find a load table on page 46. An overview of our radio controls can be found on page 47 of this catalogue. 19

20 Roller shutter applications P5/16PR+ P9/16PR+ Tubular drives with electronic limit switches for winding shafts from Ø 38 mm Highlights Intelligent roller shutter drive with automatic shutter length adjustment for roller shutters with or without anti-lifting device Quiet, smooth operation For use with or without anti-lifting device Automatic switch-off in the event of jamming (e.g. due to frozen shutter) Automatic shutter length adjustment Parallel switching possible without cut-off relay No installation set required to programme final positions Technical data Driving torque 5 / 9 Nm Output speed P5 16 min -1 P5 20 min -1 P9 16 min -1 Limit switch range 64 revolutions Nominal voltage 230V AC/50Hz Type of operation S2 4 min Protection rating IP44 Connection cable 3 m Item number Name Nominal Power consumption (W) current (A) P5/16PR P5/20PR P9/16PR Details Automatic shutter length adjustment in systems featuring buffers Identical appearance when shutters are open No change in position due to influencing factors such as temperature No fixed buffers required for operation Suitable for roller shutters with or without buffer systems No extra storage space required due to different types of drives Suitable for roller shutters with or without anti-lifting device No extra storage space required due to different types of drives Automatic anti-lift device detection Roller shutter is pushed down to prevent break-ins Jam detection in the event of frozen shutter slats Roller shutter is protected from damage caused by overload Parallel switching No additional costs, no extra work and no extra space requirements for cut-off relay Suitable for left and right-hand installation No extra storage space required due to different types of drives Final position programming without installation set No special installation set required to programme final positions Final position settings can be changed on site without any special installation set Soft upper buffer Less loading on shutter and buffer thanks to constant adjustment of the forces acting on the buffer Shutter curtain can be wound up around motor head Suitable for use in applications with even very limited space Each drive is being tested for its performance, insulation value, braking power and limit switch accuracy, this guarantees highest quality for our products. 20

21 Dimensions Designation a (mm) b (mm) c (mm) d (mm) e (mm) P5/16PR P5/20PR P9/16PR Order data Designation Torque (Nm) Output speed (min -1 ) Item number P5/16PR P5/20PR P9/16PR Order data Designation Torque (Nm) Output speed (min -1 ) Item number P5/16PR+ with bracket P5/20PR+ with bracket P9/16PR+ with bracket Mechanical accessories can be found in the chapter with the same title starting on page 49. Possible combinations of connecting elements and wall brackets can be found at the end of this catalogue. Please find a load table on page 46. An overview of our radio controls can be found on page 47 of this catalogue. 21

22 Roller shutter applications R8/17R(+) R40/17R Tubular drives with electronic limit switches for winding shafts from Ø 50 mm Intelligent roller shutter drive with obstruction detection and automatic shutter length adjustment for roller shutters with (R+) or without (R) antilifting device Quiet, smooth operation For use with or without anti-lifting device Automatic switch-off in the event of jamming (e.g. frozen shutter) Automatic shutter length adjustment Parallel switching possible without cut-off relay Obstruction detection Technical data Driving torque 8 / 12 / 20 / 30 / 37 Nm Output speed 17 min -1 Limit switch range 64 revolutions Nominal voltage 230V AC/50Hz Type of operation S2 4 min Protection rating IP44 Connection cable 3 m Item number Name Nominal Power consumption (W) current (A) R8/17R R12/17R R20/17R R30/17R R40/17R R8/17R R12/17R R20/17R Automatic shutter length adjustment Identical appearance when shutters are open No change in position due to influencing factors such as temperature Easy setting of final positions Upper and lower final positions are detected automatically Jam detection in the event of frozen shutter slats Roller shutter is protected from damage caused by overload Obstruction detection Roller shutter is protected from damage caused by obstructions such as window boxes Parallel switching No additional costs, no extra work and no extra space requirements for cut-off relay Suitable for left and right-hand installation No extra storage space required due to different types of drives Soft upper buffer Less loading on shutter and buffer thanks to constant adjustment of the forces acting on the buffer Automatic anti-lift device detection (R+) Roller shutter is pushed down to prevent break-ins Shutter curtain can be wound up around motor head Suitable for use in applications with even very limited space Overheat protection for motor In the event of overheating, the temperature sensor will automatically switch off the motor to prevent damage to motor and shutter Easy-mount mounting pins No special tools required to fit or remove mounting pins Each drive is being tested for its performance, insulation value, braking power and limit switch accuracy, this guarantees highest quality for our products. 22

23 Dimensions For applications without anti-lift device Designation a (mm) b (mm) c (mm) d (mm) e (mm) R8/17R R12/17R R20/17R R30/17R R40/17R For applications with anti-lift device Designation a (mm) b (mm) c (mm) d (mm) e (mm) R8/17R R12/17R R20/17R Order data For applications without anti-lift device Designation Torque (Nm) Output speed (min -1 ) Item number R8/17R R12/17R R20/17R R30/17R R40/17R For applications with anti-lift device Designation Torque (Nm) Output speed (min -1 ) Item number R8/17R R12/17R R20/17R Mechanical accessories can be found in the chapter with the same title starting on page 49. Possible combinations of connecting elements and wall brackets can be found at the end of this catalogue. Please find a load table on page 46. An overview of our radio controls can be found on page 47 of this catalogue. 23

24 Roller shutter applications R8/17PR+ R40/17PR+ Tubular drives with electronic limit switches for winding shafts from Ø 50 mm Highlights Intelligent roller shutter drive with automatic shutter length adjustment for roller shutters with or without anti-lifting device Quiet, smooth operation For use with or without anti-lifting device Automatic switch-off in the event of jamming (e.g. due to frozen shutter) Automatic shutter length adjustment Parallel switching possible without cut-off relay No installation set required to programme final positions Technical data Driving torque 8 / 12 / 20 / 30 / 37 Nm Output speed 17 min -1 Limit switch range Nominal voltage Type of operation Protection rating Connection cable 64 revolutions 230V AC/50Hz S2 4 min IP44 3 m Nominal Power consumption (W) Item number Name current (A) R8/17PR+ 0, R12/17PR+ 0, R20/17PR+ 0, R30/17PR+ 0, R40/17PR+ 1, Optionally these drives are available with a 5-wire cable (for power supply and data transfer) for KNX/EIB bus installations. The SMI actor forms the perfect interface to the KNX/EIB system. Details Automatic shutter length adjustment in systems featuring buffers Identical appearance when shutters are open No change in position due to influencing factors such as temperature No fixed buffers required for operation Suitable for roller shutters with or without buffer systems No extra storage space required due to different types of drives Suitable for roller shutters with or without anti-lifting device No extra storage space required due to different types of drives Automatic anti-lift device detection Roller shutter is pushed down to prevent break-ins Jam detection in the event of frozen shutter slats Roller shutter is protected from damage caused by overload Parallel switching No additional costs, no extra work and no extra space requirements for cut-off relay Suitable for left and right-hand installation No extra storage space required due to different types of drives Final position programming without installation set No special installation set required to programme final positions Final position settings can be changed on site without any special installation set Soft upper buffer Less loading on shutter and buffer thanks to constant adjustment of the forces acting on the buffer Shutter curtain can be wound up around motor head Suitable for use in applications with even very limited space Each drive is being tested for its performance, insulation value, braking power and limit switch accuracy, this guarantees highest quality for our products. 24

25 Dimensions Designation a (mm) b (mm) c (mm) d (mm) e (mm) R8/17PR R12/17PR R20/17PR R30/17PR R40/17PR Order data Designation Torque (Nm) Output speed (min -1 ) Item number R8/17PR R12/17PR R20/17PR R30/17PR R40/17PR Mechanical accessories can be found in the chapter with the same title starting on page 49. Possible combinations of connecting elements and wall brackets can be found at the end of this catalogue. Please find a load table on page 46. An overview of our radio controls can be found on page 47 of this catalogue. 25

26 Roller shutter applications P5/16PRF+ P9/16PRF+ Tubular drives with integrated radio receiver for winding shafts from Ø 38 mm Highlights Intelligent roller shutter drive with integrated radio receiver for roller shutters with or without anti-lifting device Interference-free radio frequency No roller shutter buffer necessary Quiet, smooth operation No wiring to control element required Simple programming Automatic switch-off in the event of jamming (e.g. frozen shutter) Technical data Driving torque 5 / 9 Nm Output speed 20 min -1, 16 min -1 Limit switch range 64 revolutions Nominal voltage 230V AC/50Hz Type of operation S2 4 min Protection rating IP44 Connection cable 3 m Radio frequency 868,3 MHz Item number Name Nominal Power consumption (W) current (A) P5/16PRF P5/20PRF P9/16PRF Details Integrated radio receiver No wiring to control elements required Easy and no-mess installation as no wiring to the control point has to be installed Control elements can be positioned at any chosen point Programming via transmitter No separate installation set is required for programming Easy, no-mess programming as roller shutter box does not have to be accessed Automatic shutter length adjustment in systems featuring buffers Identical appearance when shutters are open No change in position due to influencing factors such as temperature Automatic anti-lift device detection Roller shutter is pushed down to prevent break-ins No fixed buffers required for operation Suitable for roller shutters with or without buffer systems No extra storage space required due to different types of drives Jam detection in the event of frozen shutter slats Roller shutter is protected from damage caused by overload Individual, group and central control with up to 16 transmitters possible Group control possible at any time no wiring installations required No mess or extra work caused by wiring installations Each drive is being tested for its performance, insulation value, braking power and limit switch accuracy, this guarantees highest quality for our products. 26

27 Dimensions Designation a (mm) b (mm) c (mm) d (mm) e (mm) P5/16PRF P5/20PRF P9/16PRF Order data Designation Torque (Nm) Output speed (min -1 ) Item number P5/16PRF P5/20PRF P9/16PRF Order data Designation Torque (Nm) Output speed (min -1 ) Item number P5/16PRF P5/20PRF P9/16PRF Mechanical accessories can be found in the chapter with the same title starting on page 49. Possible combinations of connecting elements and wall brackets can be found at the end of this catalogue. Please find a load table on page 46. An overview of our radio controls can be found on page 47 of this catalogue. 27

28 Roller shutter applications R8/17PRF+ R40/17PRF+ Tubular drives with integrated radio receiver for winding shafts from Ø 50 mm Intelligent roller shutter drive with integrated radio receiver for roller shutters with or without anti-lifting device Interference-free radio frequency No roller shutter buffer necessary Quiet, smooth operation No wiring to control element required Simple programming Automatic switch-off in the event of jamming (e.g. frozen shutter) Technical data Driving torque 8 / 12 / 20 / 30 / 37 Nm Output speed 17 min -1 Limit switch range 64 revolutions Nominal voltage 230V AC/50Hz Type of operation S2 4 min Protection rating IP44 Connection cable 3 m Radio frequency 868,3 MHz Item number Name Nominal Power consumption (W) current (A) R8/17PRF R12/17PRF R20/17PRF R30/17PRF R40/17PRF Integrated radio receiver No wiring to control elements required Easy and no-mess installation as no wiring to the control point has to be installed Control elements can be positioned at any chosen point Programming via transmitter No separate installation set is required for programming Easy, no-mess programming as roller shutter box does not have to be accessed Automatic shutter length adjustment in systems featuring buffers Identical appearance when shutters are open No change in position due to influencing factors such as temperature Automatic anti-lift device detection Roller shutter is pushed down to prevent break-ins No fixed buffers required for operation Suitable for roller shutters with or without buffer systems No extra storage space required due to different types of drives Standard shutter speed of 17 min -1 Standard shutter speed when drives with different power ratings are used Jam detection in the event of frozen shutter slats Roller shutter is protected from damage caused by overload Individual, group and central control with up to 16 transmitters possible Group control possible at any time no wiring installations required No mess or extra work caused by wiring installations Easy-mount mounting pins No special tools required to fit or remove mounting pins Each drive is being tested for its performance, insulation value, braking power and limit switch accuracy, this guarantees highest quality for our products. 28

29 Dimensions Designation a (mm) b (mm) c (mm) d (mm) e (mm) R8/17PRF R12/17PRF R20/17PRF R30/17PRF R40/17PRF Order data Designation Torque (Nm) Output speed (min -1 ) Item number R8/17PRF R12/17PRF R20/17PRF R30/17PRF R40/17PRF Mechanical accessories can be found in the chapter with the same title starting on page 49. Possible combinations of connecting elements and wall brackets can be found at the end of this catalogue. Please find a load table on page 46. An overview of our radio controls can be found on page 47 of this catalogue. 29

30 Sun protection applications P5/20PS P9/16PS Tubular drives with electronic limit switches for winding shafts from Ø 38 mm Highlights Intelligent tubular drive with screen length adjustment for sun protection applications Quiet, smooth operation Automatic screen length adjustment Parallel switching possible without cut-off relay Optimum closing force adjustment Suitable for multiple applications No installation set required to programme final positions Technical data Driving torque 5 / 9 Nm Output speed P5 20 min -1 Limit switch range Nominal voltage Type of operation Protection rating Connection cable P5 30 min -1 P9 16 min revolutions 230V AC/50Hz S2 4 min IP44 3 m Nominal Power consumption (W) Item number Name current (A) P5/20PS P5/30PS P9/16PS Details Automatic screen length adjustment in systems featuring buffers Automatic screen length adjustment to compensate for changes caused by temperature influences or ageing No readjustment of sun protection system necessary No fixed buffers required for operation Suitable for awnings with or without buffer systems No extra storage space required due to different types of drives Optimum closing force adjustment Constant adjustment of closing forces to protect screen and seams Suitable for use in multiple sun protection applications No extra storage space required due to different types of drives Parallel switching No additional costs, no extra work and no extra space requirements for cut-off relay Suitable for left and right-hand installation No extra storage space required due to different types of drives Final position programming without installation set No special installation set required to programme final positions Final position settings can be changed on site without any special installation set Screen can be wound up around motor head Suitable for use in applications with even very limited space Overheat protection for motor In the event of overheating, the temperature sensor will automatically switch off the motor to prevent damage to motor and screen Jam detection Protective system shut-off in the event of screen jamming Each drive is being tested for its performance, insulation value, braking power and limit switch accuracy, this guarantees highest quality for our products. 30

31 Dimensions Designation a (mm) b (mm) c (mm) P5/20PS without connection piece d (mm) e (mm) P5/30PS without connection piece P9/16PS without connection piece Order data Designation Torque (Nm) Output speed (min -1 ) P5/20PS without connection piece P5/30PS without connection piece P9/16PS without connection piece Item number Mechanical accessories can be found in the chapter with the same title starting on page 49. Possible combinations of connecting elements and wall brackets can be found at the end of this catalogue. Please find a load table on page 46. An overview of our radio controls can be found on page 47 of this catalogue. 31

32 Sun protection applications R8/17PS R50/11PS(+) Tubular drives with electronic limit switches for winding shafts from Ø 50 mm Intelligent tubular drive with cloth length adjustment for open awnings and cassette awnings Quiet, smooth operation Automatic cloth length adjustment Parallel switching possible without cut-off relay Optimum closing force adjustment Suitable for multiple applications No installation set required to programme final positions Technical data Driving torque Item number Name 8 / 12 / 20 / 30 / 37 / 50 Nm Output speed R8 to R40 17 min -1 Limit switch range Nominal voltage Type of operation Protection rating Connection cable R50 11 min revolutions 230V AC/50Hz S2 4 min IP44 3 m Nominal Power consumption current (A) (W) R8/17PS R12/17PS R20/17PS R30/17PS R40/17PS R50/11PS R12/17PS R20/17PS R30/17PS R40/17PS R50/11PS Optionally these drives are available with a 5-wire cable (for power supply and data transfer) for KNX/EIB bus installations. The SMI actor forms the perfect interface to the KNX/EIB system. Automatic cloth length adjustment in systems featuring buffers Automatic cloth adjustment to compensate for changes caused by temperature influences or ageing No readjustment of sun protection system necessary No fixed buffers required for operation Suitable for awnings with or without buffer systems No extra storage space required due to different types of drives Final position programming without installation set No special installation set required to programme final positions Final position settings can be changed on site without any special installation set Optimum closing force adjustment Constant adjustment of closing forces to protect awning cloth and seams Greater closing force for cassette awnings (PS+) Prevents cloth from getting soiled through open cassettes Suitable for multiple applications with various types of awnings No extra storage space required due to different types of awnings Parallel switching No additional costs, no extra work and no extra space requirements for cut-off relay Suitable for left and right-hand installation No extra storage space required due to different types of drives Easy setting of final positions Final positions can be easily set from the ground no access to drive necessary Easy-mount mounting pins No special tools required to fit or remove mounting pins Each drive is being tested for its performance, insulation value, braking power and limit switch accuracy, this guarantees highest quality for our products. 32

33 Dimensions Designation a (mm) b (mm) c (mm) d (mm) e (mm) R8/17PS R12/17PS R20/17PS R30/17PS R40/17PS R50/11PS For cassette awnings with greater closing force R12/17PS R20/17PS R30/17PS R40/17PS R50/11PS Order data Designation Torque (Nm) Output speed (min -1 ) Item number R8/17PS R12/17PS R20/17PS R30/17PS R40/17PS R50/11PS For cassette awnings with greater closing force R12/17PS R20/17PS R30/17PS R40/17PS R50/11PS Mechanical accessories can be found in the chapter with the same title starting on page 49. Possible combinations of connecting elements and wall brackets can be found at the end of this catalogue. Please find a load table on page 46. An overview of our radio controls can be found on page 47 of this catalogue. 33

34 Sun protection applications R44/14PS(+) R120/11PS(+) Tubular drives with electronic limit switches for winding shafts from Ø 63 mm Intelligent tubular drive with cloth length adjustment for open awnings and cassette awnings Quiet, smooth operation Automatic cloth length adjustment Parallel switching possible without cut-off relay Optimum closing force adjustment Suitable for multiple applications No installation set required to programme final positions Technical data Driving torque 44 / 50 / 60 / 70 / 80 / 120 Nm Output speed R44 14 min 1 Limit switch range Nominal voltage Type of operation Protection rating Connection cable R50 and R70 17 min 1 R60, R80 and R min 1 64 revolutions 230V AC/50Hz S2 4 min IP44 3 m Nominal Power consumption (W) Item number Name current (A) R44/14PS R50/17PS R60/11PS R70/17PS R80/11PS R120/11PS R44/14PS R50/17PS R60/11PS R70/17PS R80/11PS R120/11PS Optionally these drives are available with a 5-wire cable (for power supply and data transfer) for KNX/EIB bus installations. The SMI actor forms the perfect interface to the KNX/EIB system. Automatic cloth length adjustment in systems featuring buffers Automatic cloth adjustment to compensate for changes caused by temperature influences or ageing No readjustment of sun protection system necessary No fixed buffers required for operation Suitable for awnings with or without buffer systems No extra storage space required due to different types of drives Final position programming without installation set No special installation set required to programme final positions Final position settings can be changed on site without any special installation set Optimum closing force adjustment Constant adjustment of closing forces to protect cloth and seams Greater closing force for cassette awnings (PS+) Prevents cloth from getting soiled through open cassettes Suitable for multiple applications with various types of awnings No extra storage space required due to different types of awnings Parallel switching No additional costs, no extra work and no extra space requirements for cut-off relay Suitable for left and right-hand installation No extra storage space required due to different types of drives Easy setting of final positions Final positions can be easily set from the ground no access to drive necessary Easy-mount mounting pins No special tools required to fit or remove mounting pins Each drive is being tested for its performance, insulation value, braking power and limit switch accuracy, this guarantees highest quality for our products. 34

35 Dimensions Designation a (mm) b (mm) c (mm) d (mm) e (mm) R44/14PS R50/17PS R60/11PS R70/17PS R80/11PS R120/11PS For cassette awnings with greater closing force R44/14PS R50/17PS R60/11PS R70/17PS R80/11PS R120/11PS Order data Designation Torque (Nm) Output speed (min -1 ) Item number R44/14PS R50/17PS R60/11PS R70/17PS R80/11PS R120/11PS For cassette awnings with greater closing force R44/14PS R50/17PS R60/11PS R70/17PS R80/11PS R120/11PS Mechanical accessories can be found in the chapter with the same title starting on page 49. Possible combinations of connecting elements and wall brackets can be found at the end of this catalogue. Please find a load table on page 46. An overview of our radio controls can be found on page 47 of this catalogue. 35

36 Sun protection applications R8/17SE Tubular drive with electronic limit switching for screens for Ø mm barrels Highlights Intelligent tubular drive with cloth length compensation for windproof screens equipped with locking device For use in conjunction with windproof screens Special control unit is not necessary Calm and quiet running Parallel switching possible without cut-off relay Optimum closing force adjustment Technical data Driving torque 8 Nm Output speed 17 min-1 Limit switch range 64 revolutions Nominal voltage 230V AC/50Hz Type of operation S2 4 min Protection rating IP44 Connection cable 3 m Item number Name Nominal Power consumption (W) current (A) R8/17SE Details For use in conjunction with locking device for screen applications 1 Windproof Screens remain under tension Separate control is not necessary for reversing movement No additional cost for special control unit as the control of the reversing movement is integrated in the drive Automatic screen length adjustment Automatic screen length adjustment to compensate for changes caused by temperature influences or ageing No readjustment of sun protection system necessary Optimum closing force adjustment Constant adjustment of closing forces to protect screen and seams Parallel switching No additional costs, no extra work and no extra space requirements for cut-off relay Suitable for left and right-hand installation No extra storage space required due to different types of drives Easy setting of final positions Final positions can be easily set from the ground No access to drive necessary Easy-mount mounting pins No special tools required to fit or remove mounting pins Soft upper buffer Less loading on screen and seams thanks to constant adjustment of the forces acting on the screen Screen can be wound up around motor head Suitable for use in applications with even very limited space Overheat protection for motor In the event of overheating, the temperature sensor will automatically switch off the motor to prevent damage to motor and screen 1 see chapter mechanical accessories for locking device other locking devices available on request 36

37 Dimensions Designation a (mm) b (mm) c (mm) d (mm) e (mm) R8/17SE Order data Designation Torque (Nm) Output speed (min -1 ) Item number R8/17SE Mechanical accessories can be found in the chapter with the same title starting on page 49. Possible combinations of connecting elements and wall brackets can be found at the end of this catalogue. Please find a load table on page 46. An overview of our radio controls can be found on page 47 of this catalogue. Locking system for screens Locking system Locking system for screens Item Number R8/17SE 37

38 Sun protection applications P5/20PSF P9/16PSF Tubular drives with integrated radio receiver for winding shafts from Ø 38 mm Highlights Intelligent tubular drive with integrated radio receiver for sun protection applications Interference-free radio frequency Quiet, smooth operation No wiring to control element required Simple programming Optimum closing force adjustment Automatic cloth length adjustment Technical data Driving torque 5/9 Nm Output speed P5 20 min 1 Limit switch range Nominal voltage Type of operation Protection rating Connection cable Radio frequency P5 30 min -1 P9 16 min revolutions 230V AC/50Hz S2 4 min IP44 3 m 868,3 MHz Nominal Power consumption (W) Item number Name current (A) P5/20PSF P5/30PSF P9/16PSF Details Integrated radio receiver No wiring to control elements required Easy and no-mess installation as no wiring to the control point has to be installed Control elements can be positioned at any chosen point Programming via transmitter No separate installation set is required for programming No fixed buffers required for operation Suitable for awnings with or without buffer systems No extra storage space required due to different types of drives Automatic cloth length adjustment in systems featuring buffers Automatic cloth adjustment to compensate for changes caused by temperature influences or ageing No readjustment of sun protection system necessary Optimum closing force adjustment Constant adjustment of closing forces to protect cloth and seams Suitable for left and right-hand installation No extra storage space required due to different types of drives Intermediate position High degree of comfort thanks to simple adjustment to any given intermediate position Individual, group and central control with up to 16 transmitters possible Group control possible at any time no wiring installations required No mess or extra work caused by wiring installations Each drive is being tested for its performance, insulation value, braking power and limit switch accuracy, this guarantees highest quality for our products. 38

39 Dimensions Designation a (mm) b (mm) c (mm) d (mm) e (mm) P5/20PSF P5/30PSF P9/16PSF Order data Designation Torque (Nm) Output speed (min -1 ) Item number P5/20PSF P5/30PSF P9/16PSF Mechanical accessories can be found in the chapter with the same title starting on page 49. Possible combinations of connecting elements and wall brackets can be found at the end of this catalogue. Please find a load table on page 46. An overview of our radio controls can be found on page 47 of this catalogue. 39

40 Sun protection applications R8/17PSF R50/11PSF(+) Tubular drives with integrated radio receiver for winding shafts from Ø 50 mm Highlights Intelligent tubular drive with integrated radio receiver for open awnings and cassette awnings Interference-free radio frequency Quiet, smooth operation No wiring to control element required Simple programming Optimum closing force adjustment Automatic cloth length adjustment Technical data Driving torque 8/12/20/30/37/50 Nm Output speed R8 to R40 17 min 1 R50 11 min -1 Limit switch range 64 revolutions Nominal voltage 230V AC/50Hz Type of operation S2 4 min Protection rating IP44 Connection cable 3 m Radio frequency 868,3 MHz Item number Name Nominal Power consumption (W) current (A) R8/17PSF R12/17PSF R20/17PSF R30/17PSF R40/17PSF R50/11PSF R12/17PSF R20/17PSF R30/17PSF R40/17PSF R50/11PSF Details Integrated radio receiver No wiring to control elements required Easy and no-mess installation as no wiring to the control point has to be installed Control elements can be positioned at any chosen point Programming via transmitter No separate installation set is required for programming No fixed buffers required for operation Suitable for awnings with or without buffer systems No extra storage space required due to different types of drives Automatic cloth length adjustment in systems featuring buffers Automatic cloth adjustment to compensate for changes caused by temperature influences or ageing No readjustment of sun protection system necessary Optimum closing force adjustment Constant adjustment of closing forces to protect cloth and seams Suitable for left and right-hand installation No extra storage space required due to different types of drives Intermediate position High degree of comfort thanks to simple adjustment to any given intermediate position Individual, group and central control with up to 16 transmitters possible Group control possible at any time - no wiring installations required No mess or extra work caused by wiring installations Each drive is being tested for its performance, insulation value, braking power and limit switch accuracy, this guarantees highest quality for our products. 40

41 Dimensions Designation a (mm) b (mm) c (mm) d (mm) e (mm) R8/17PSF R12/17PSF R20/17PSF R30/17PSF R40/17PSF R50/11PSF For cassette awnings with greater closing force R12/17PSF R20/17PSF R30/17PSF R40/17PSF R50/11PSF Order data Designation Torque (Nm) Output speed (min -1 ) Item number R8/17PSF R12/17PSF R20/17PSF R30/17PSF R40/17PSF R50/11PSF For cassette awnings with greater closing force R12/17PSF R20/17PSF R30/17PSF R40/17PSF R50/11PSF Mechanical accessories can be found in the chapter with the same title starting on page 49. Possible combinations of connecting elements and wall brackets can be found at the end of this catalogue. Please find a load table on page 46. An overview of our radio controls can be found on page 47 of this catalogue. 41

42 Sun protection applications R44/14PSF(+) R120/11PSF(+) Tubular drives with integrated radio receiver for winding shafts from Ø 63 mm Highlights Intelligent tubular drive with integrated radio receiver for open awnings and cassette awnings Interference-free radio frequency Quiet, smooth operation No wiring to control element required Simple programming Optimum closing force adjustment Automatic cloth length adjustment Technical data Driving torque Output speed R44 14 min 1 Limit switch range Nominal voltage Type of operation Protection rating Connection cable Radio frequency Item number Name 44 / 50 / 60 / 70 / 80 / 120 Nm R50 and R70 17 min 1 R60, R80 and R min 1 64 revolutions 230V AC/50Hz S2 4 min IP44 3 m 868,3 MHz Nominal Power consumption current (A) (W) R44/14PSF R50/17PSF R60/11PSF R70/17PSF R80/11PSF R120/11PSF R44/14PSF R50/17PSF R60/11PSF R70/17PSF R80/11PSF R120/11PSF Details Integrated radio receiver No wiring to control elements required Easy and no-mess installation as no wiring to the control point has to be installed Control elements can be positioned at any chosen point Programming via transmitter No separate installation set is required for programming No fixed buffers required for operation Suitable for awnings with or without buffer systems No extra storage space required due to different types of drives Automatic cloth adjustment in systems featuring buffers Automatic cloth adjustment to compensate for changes caused by temperature influences or ageing No readjustment of sun protection system necessary Optimum closing force adjustment Constant adjustment of closing forces to protect cloth and seams Suitable for left and right-hand installation No extra storage space required due to different types of drives Intermediate position High degree of comfort thanks to simple adjustment to any given intermediate position Individual, group and central control with up to 16 transmitters possible Group control possible at any time no wiring installations required No mess or extra work caused by wiring installations Each drive is being tested for its performance, insulation value, braking power and limit switch accuracy, this guarantees highest quality for our products. 42

43 Dimensions Designation a (mm) b (mm) c (mm) d (mm) e (mm) R44/14PSF R50/17PSF R60/11PSF R70/17PSF R80/11PSF R120/11PSF For cassette awnings with greater closing force R44/14PSF R50/17PSF R60/11PSF R70/17PSF R80/11PSF R120/11PSF Order data Designation Torque (Nm) Output speed (min -1 ) Item number R44/14PSF R50/17PSF R60/11PSF R70/17PSF R80/11PSF R120/11PSF For cassette awnings with greater closing force R44/14PSF R50/17PSF R60/11PSF R70/17PSF R80/11PSF R120/11PSF Mechanical accessories can be found in the chapter with the same title starting on page 49. Possible combinations of connecting elements and wall brackets can be found at the end of this catalogue. Please find a load table on page 46. An overview of our radio controls can be found on page 47 of this catalogue. 43

44 Special applications R35/8G R120/3G D.C. drives for winding shafts from Ø 63 mm Highlights Multi-purpose tubular drive for applications in which protective extra-low voltage is necessary, featuring precision mechanical limit switches Quiet, smooth operation Easy setting of final positions Operation with protective extra-low voltage possible Shutter/screen/cloth can be wound up around motor head Suitable for use with swimming pool covers and automobile superstructures Technical data Driving torque 35 / 60 / 120 Nm Output speed R35 and R60 8 min 1 Limit switch range Limit switch range R60/8GHK Nominal voltage Type of operation Protection rating Connection cable R120 3 min 1 36 revolutions 38 revolutions R35 12V/DC R60 and R120 24V/DC S2 8 min IP44 4 m Nominal Power consumption (W) Item number Name current (A) R35/8G R60/8G R120/3G R60/8GHK Details Suitable for left and right-hand installation No extra storage space required due to different types of drives No fixed buffers required for operation No stoppers in visible area Easy setting of final positions No special tools required to set final positions Flexible installation tool for final positions Precise final position settings even in non-easy access constructional designs Suitable for protective extra-low voltages and automobile applications Multi-purpose drive Shutter/curtain/cloth can be wound up around motor head Suitable for use in applications with even very limited space Combinable with many Becker wall bracket plates Adaptable to multiple applications Operation via rechargeable battery pack possible System can be opened or closed in the event of power outage Operation at 12 or 24V These drives can be used in applications where protective extra-low voltages are necessary, e.g. for swimming pool covers Each drive is being tested for its performance, insulation value, braking power and limit switch accuracy, this guarantees highest quality for our products. 44

45 Dimensions Designation a (mm) b (mm) c (mm) d (mm) e (mm) R35/8G R60/8G R120/3G Order data Designation Torque (Nm) Output speed (min -1 ) Item number R35/8G R60/8G R120/3G Dimensions Designation a (mm) b (mm) c (mm) d (mm) e (mm) R60/8GHK Order data Designation Torque (Nm) Output speed (min -1 ) Item number R60/8GHK Mechanical accessories can be found in the chapter with the same title starting on page 49. Possible combinations of connecting elements and wall brackets can be found at the end of this catalogue. Please find a load table on page 46. An overview of our DC controls can be found in our catalogue Electrical accessories. Control units and other drive variations on demand. 45

46 Load Table For the following types: M, R, R+, PR, PRF+ and HK Shaft diameter (mm) Roller shutter height (m) Profile thickness (mm) Type Nm/Umin -1 P5/16 5/ P5/20 5/ P9/16 9/ P13/9 13 / R8/17 8/ R12/17 12 / R15/17 15 / R20/17 20 / R25/17 25 / R30/17 30 / R40/17 37 / R50/11 50 / R44/14 44 / R50/17 50 / R60/11 60 / R70/17 70 / R80/11 80 / R120/ / The tensile loading figures given are approximate values for solid roller shutters. The friction which typically occurs in roller shutter systems has been taken into account! The most common values for roller shutter applications are marked in colour. Tensile loading in kg

47 Overview Centronic Control Programme Wireless Solutions EC211 EC311 EC541 EC545 MC411 MC441 TC445 TC511 SWC411 SWC441 SW 442 SWC545 SC431 SC561 SC811 SC861 SWC510 VC220 VC320 VCJ470 VC410 VC420 VC421 VC520 UCS520 UCR520 Centronic Controls Wireless Solutions Applications Roller Shutters External Sun Protection 1 3 Internal Sun Protection Lighting (with VC ) Functions Handheld Transmitter Wall-Mounted Transmitter Display Seperate Up/Stop/Down Buttons Handheld Transmitter, 1-Channel Handheld Transmitter, 2-Channel Handheld Transmitter, 5-Channel Receiver/Control Sensor (Transmitter) Manual/Automatic Mode Individual Control Group Control Central Control Jogging Operation for Venetian Blinds Intermediate Position Ventilation Position/ Turn/Fabric Stretching Memory Function Date/Time Summer/Winter Time Auto. Astro Function Switching Times Blocking Times Sun (Threshold Regulation) Wind (Threshold Regulation) Winter Operation Switch/Pushbotton Solar Operation Compatible Receivers VC220 VC320 VCJ470 VC410 VC420 VC520 UCS520 UCR520 SWC510 Compatible Drives PRF-Models PSF-Models 1 for example awning, venetian blind; 2 for example roller blind, venetian blind; 3 exept for awning

48 Overview Centronic Control Programme Wired Solutions Centronic Controls Wired Solutions EC41 EC42 EC52 UC42 UC45 UC52 MC42 TC42 TC52 SC41 SC43 SWC52 SC71 SC81 Applications Rolller Shutters External Sun Protection Internal Sun Protection Functions Surface Mounted Flush-Mounted Top Hat Rail Mounting Fxed to Window via Suction Cup Display Separate Up/Stop/Down Buttons Switch/Pushbotton Combination Sensor Manual/Automatic Mode Individual Control Group/Central Control Jogging Operation for Venetian Blinds Intermediate Position Ventilation Position/ Turn/Fabric Stretching Memory Function Date/Time Summer/Winter Time Auto. Astro Function Switching Times Blocking Times Sun (Threshold Regulation) Wind (Threshold Regulation) Winter Operation Compatible Sensor Equipment SC41 SC43 SC71 SC81 Compatible Drives M-Models PR-Models R-Models PS-Models SE-Models HK-Models G-Models 1 for example awning, venetian blind 2 for example roller blind, venetian blind 48

49 Mechanical Accessories Product Catalogue Mechanical Accessories

50 Drive Adapters, Rings and Counter Brackets for Tubular Drives, Types P5/16 - P13/9, R8/17 - R50/11 and R44/14 - R120/11 Octagonal shaft Manufacturer Selve V. Müller Selve Selve, Weisbender, Staffer, V.Müller SHG Selve,SHG, Weisbender, Eckermann Staffer, V. Müller Heroal Alulux Heroal Name P5/20-P13/9 R8/17-R50/11 R44/14-R120/11 Drive adapter (S40) Ring (S40) Drive adapter (S40VM) Ring (S40VM) Shaft clamp for suspendable springs (S40) Drive adapter (S50) Ring (S50) Drive adapter (S60) Ring (S60) Intermediate ring (50x1,5) Drive adapter (M60) Ring (M60) Drive adapter (ROLM60) Ring (ROLM60) Drive adapter (SM70) Ring (SM70) Drive adapter (ST70) Ring (ST70) Drive adapter (70) Ring (70) Drive adapter (SW102) Ring (SW102) Drive adapter (125) Ring (125) Octagonal shaft Manufacturer Name P5/20-P13/9 R8/17-R50/11 R44/14-R120/11 Forjas Drive adapter (SW58) Ring (SW58) Profiled shaft Manufacturer Name P5/20-P13/9 R8/17-R50/11 R44/14-R120/11 Hoos, Metalpreß, Weisbender Eckermann, Imbac Alukon Drive adapter (HM65) Ring (HM65) Drive adapter (E65) Ring (E65) Drive adapter (A128) Ring (A128) All of the components are suitable for use with tubular drives with mechanical limit switches (M), electronic limit switches (R(+), PR, PRF+, PS(+), PSF(+)) as well as with a hand crank connection (HK). 50

51 Profiled shaft Manufacturer Name P5/20-P13/9 R8/17-R50/11 R44/14-R120/11 Deprat Drive adapter (Deprat 62) Ring (Deprat 62) Profiled shaft Manufacturer Name P5/20-P13/9 R8/17-R50/11 R44/14-R120/11 Deprat Drive adapter (Deprat 89) Ring (Deprat 89) Profiled shaft Manufacturer Name P5/20-P13/9 R8/17-R50/11 R44/14-R120/11 Zurflüh-Feller Drive adapter (ZF45x0.5) Ring (ZF45x0.5) Drive adapter (ZF54x0.5) Drive adapter (ZF64x0.8) Ring (ZF64x0.8) Drive adapter (ZF80x1.2) Ring (ZF80x1.2) Hexagon shaft Manufacturer Name P5/20-P13/9 R8/17-R50/11 R44/14-R120/11 Butzbach, Rieko Butzbach Drive adapter (B60) Ring (B60) Drive adapter (B75) Ring (B75) Intermediate ring (B75) Drive adapter (B85) Ring (B85)

52 Drive Adapters, Rings and Counter Brackets for Tubular Drives, Types P5/16 - P13/9, R8/17 - R50/11 and R44/14 - R120/11 Bourdon tube Manufacturer Name P5/20-P13/9 R8/17-R50/11 R44/14-R120/11 Siral Drive adapter (SIRAL 50) Grooved tube Manufacturer Name P5/20-P13/9 R8/17-R50/11 R44/14-R120/11 Drive adapter (Forjas 70) Ring (Forjas 70) Grooved tube Manufacturer Name P5/20-P13/9 R8/17-R50/11 R44/14-R120/11 Imbac Drive adapter (Imbac 85) Ring (Imbac 85) Grooved tube Manufacturer Name P5/20-P13/9 R8/17-R50/11 R44/14-R120/11 Drive adapter (50x2) Ring (50x2) Drive adapter (DW 70N) Ring (DW 70N) All of the components are suitable for use with tubular drives with mechanical limit switches (M), electronic limit switches (R(+), PR, PRF+, PS(+), PSF(+)) as well as with a hand crank connection (HK). 52

53 Grooved tube Manufacturer Name P5/20-P13/9 R8/17-R50/11 R44/14-R120/11 Drive adapter (DW 74N) Ring (DW 74N) Drive adapter (DW 78 R+F) Diecast 1) Ring (DW 78 R+F) Drive adapter (DW 78x1) Ring (DW 78x1) Drive adapter (DW 78N) Ring (DW 78N) Drive adapter (DW 85N) Ring (DW 85N) Grooved tube Manufacturer Name P5/20-P13/9 R8/17-R50/11 R44/14-R120/11 Drive adapter (63N) Plastic * Drive adapter (63N) Diecast Ring (63N) * R8/17-R20/17 Round tube Manufacturer Name P5/20-P13/9 R8/17-R50/11 R44/14-R120/11 Clauss, Ates Drive adapter (38x1/40x2) Drive adapter (40x1/42x2) Ring (40x1/42x2) Drive adapter (50x1.5) Intermediate ring (50x1.5) Drive adapter (40x1.3/40x1.5) Ring (40x1.3/40x1.5) Drive adapter (40x1.3/40x1.5) Ring (40x1.3/40x1.5)

54 Drive Adapters, Rings and Counter Brackets for Tubular Drives, Types P5/16 - P13/9, R8/17 - R50/11 and R44/14 - R120/11 Precision tube Manufacturer Name P5/20-P13/9 R8/17-R50/11 R44/14-R120/11 Drive adapter (60x1,5) Ring (60x1,5) Drive adapter (63x1,5) Ring (63x1,5) Drive adapter (70x1,5) Ring (70x1,5) Drive adapter (70x2) Ring (70x2) Drive adapter (85x2,5/83x1,5) Ring (85x2,5/83x1,5) Drive adapter (98x2) Ring (98x2) Drive adapter (133x2) Ring (133x2) Intermediate ring (98x2) Drive adapter (108x3,6) Ring (108x3,6) Mounting clamps for actuator Name R8/17-R20/17 R30/17-R120/11 R44/14-R120/11 Actuator locking device Screw M Lock washer Disk Screw M6 for actuator 102/125-octagonal Disk for actuator 102/125-octagonal Counter brackets for winding shaft Manufacturer Name P5/20-P13/9 R8/17-R50/11 R44/14-R120/11 Counter bracket (50x1,5) Roller bracket (50x1,5) Counter bracket (63x1,5) Counter bracket (70x1,5) Counter bracket (108x3,6) All of the components are suitable for use with tubular drives with mechanical limit switches (M), electronic limit switches (R(+), PR, PRF+, PS(+), PSF(+)) as well as with a hand crank connection (HK). 54

55 Setting tool for drives with mechanical limit switches Flexible setting tool Item Number Setting tool Item Number Setting screw Item Number Suspension springs for roller shutter curtain Minature suspension springs for roller shutter curtains with small slats, width 8 mm, length 160 mm Item Number Maxi suspension springs for roller shutter curtains with large slats, width 14 mm, length 200 mm Item Number Minature Maxi 55

56 Rigid Safety Springs for Roller Shutters 100 mm 50 mm Ø 4,5 Rigid safety springs 1-part for 8 mm sections Item Number mm P5/16R+ - P9/16R+ (from shaft diameter S50) R8/17R+ - R20/17R+ (from shaft diameter S60) R8/17PRF+ - R20/17PRF+ (from shaft diameter S60) R8/17PR+ - R20/17PR+ 100 mm 50 mm Ø 4,5 Rigid safety springs 1-part for 14 mm sections Item Number mm P5/16R+ - P9/16R+ (from shaft diameter S50) R8/17R+ - R20/17R+ (from shaft diameter S60) R8/17PRF+ - R20/17PRF+ (from shaft diameter S60) R8/17PR+ - R20/17PR+ 100 mm 50 mm Ø 4,5 Rigid safety springs 2-part for 8 mm sections Item Number mm P5/16R+ - P9/16R+ (from shaft diameter S50) R8/17R+ - R20/17R+ (from shaft diameter S60) R8/17PRF+ - R20/17PRF+ (from shaft diameter S60) R8/17PR+ - R20/17PR+ 56

57 100 mm 50 mm Ø 4,5 Rigid safety springs 2-part for 14 mm sections Item Number mm P5/16R+ - P9/16R+ (from shaft diameter S50) R8/17R+ - R20/17R+ (from shaft diameter S60) R8/17PRF+ - R20/17PRF+ (from shaft diameter S60) R8/17PR+ - R20/17PR+ 100 mm 50 mm Ø 4,5 Rigid safety springs 3-part for 8 mm sections Item Number mm P5/16R+ - P9/16R+ (from shaft diameter S50) R8/17R+ - R20/17R+ (from shaft diameter S60) R8/17PRF+ - R20/17PRF+ (from shaft diameter S60) R8/17PR+ - R20/17PR+ 57

58 Anti-Lift Devices with Ring Fastener for Roller Shutters Anti-lift device Name Discription Item Number Anti-lift device* Anti-lift device 1-part, 8 mm profile section Anti-lift device* Anti-lift device 2-part, 8 mm profile section Anti-lift device* Anti-lift device 3-part, 8 mm profile section Anti-lift device* Anti-lift device 2-part, 8 mm profile section Anti-lift device* Anti-lift device 3-part, 14 mm profile section Anti-lift device* Anti-lift device 4-part, 14 mm profile section *2 ring fasteners are required for each anti-lift device. The distance between two anti-lift devices must not exceed 70 cm. Ring fastener Name Discription Item Number Ring fastener Ring fastener SW Ring fastener Ring fastener SW Ring fastener Ring fastener SW P5/16R+ - P9/16R+ R8/17R+ - R20/17R+ R8/17PRF+ - R20/17PRF+ R8/17PR+ - R20/17PR+ 58

59 Connecting Elements for Tubular Drives, Types P5/16 - P13/9 14 mm 39 mm 21,2 mm Connecting element Connecting element incl. screws, square mounting, 10 mm Item Number mm 40 mm 20 mm Connecting element Connecting element incl. screws, with round mounting pin, Ø 20 mm M4 Item Number mm 39 mm 20,1 mm Connecting element Connecting element incl. screws, square mounting, 10 mm Item Number mm 20 mm 48 mm M6 Mini bracket Mini bracket M6/48 incl. screws 9 mm Item Number

60 Connecting Elements for Tubular Drives, Types R8/17 - R50/11 Mounting pin 1/10 Mounting pin 1/10 (square mounting, 10 mm) Item Number Mounting pin 2/10 Mounting pin 2/10 (square mounting, 10 mm) Item Number Ø 20 mm Mounting pin 3/20 Mounting pin 3/20 (round mounting, d=20 mm) Item Number

61 Mounting pin 4/16 Mounting pin 4/16 (square mounting, 16 mm) Item Number Note: For wall bracket plate with 16 mm square mounting ( ) 20 mm 60 mm 48 mm Mini bracket Mini bracket M6/48 incl. screws Item Number M6 9 mm R8/17-R20/17 26 mm 82,5 mm 68 mm 60 mm 48 mm B bracket B bracket incl. screws Item Number M6 7 mm Drives for applications (single-ended load) R8/17-R40/17 61

62 120 mm 100 mm Connecting Elements for Tubular Drives, Types R44/14 - R120/11 Mounting pin 1/16 Mounting pin 1/16 (square mounting, 16 mm) Item Number Mounting pin 2/16 Mounting pin 2/16 (square mounting, 16 mm) Item Number Ø 25 mm Mounting pin 3/25 Mounting pin 3/25 (round mounting, d=25 mm) Item Number B bracket Item Number mm 62 mm Drives for roller shutters (single-ended load) R44/14-R80/11 62

63 Wall Bracket Plates and Awning Plates for Tubular Drives, Types P5/16 - P13/9 and R8/17- R50/11 4 mm 75 mm 67 mm 8 mm 13 mm 9 mm 94 mm 113 mm Box bracket Box bracket with 10 mm square mounting for mounting pins 1/10 and 2/10 and connection element 10 mm Item Number mm 40 mm Drives for roller shutters (single-ended load) P5/16-P13/9 R8/17-R50/17 40 mm 9 mm 4 mm 23 mm 42 mm Plaster bracket Plaster bracket with 10 mm square mounting for mounting pins 1/10 and 2/10 and connection element 10 mm Item Number mm 71 mm Drives for roller shutters (single-ended load) P5/16-P13/9 R8/17-R30/17 11 mm M6 48 mm 60 mm Awning plate Awning plate with 10 mm star mounting for mounting pins 1/10 and 2/10 and connection element 10 mm Item Number mm M6 48 mm 60 mm Awning plate Awning plate with 10 mm star mounting for mounting pins 1/10 and 2/10 and connection element 10 mm Item Number

64 12,3 mm Wall Bracket Plates and Awning Plates for Tubular Drives, Types P5/16 - P13/9 and R8/17- R50/11 11 mm 4 mm 30 mm 6.5 mm 48 mm 68 mm 82 mm Awning plate Awning plate with 10 mm square mounting for mounting pins 1/10 and 2/10 and connection element 10 mm Item Number mm 63 mm 128 mm 13 mm Multi-purpose wall bracket plate Multi-purpose wall bracket plate for mounting pin 3/20 and connection element ø 20 mm Item Number mm 9 mm 69 mm Drives for roller shutters (single-ended load) P5/16-P13/9 R8/17-R40/17 16 mm 3 mm 113 mm Box bracket Box bracket, complete for mounting pin 3/20 and connection element ø 20 mm 9 mm Item Number mm 40 mm 9 mm Drives for roller shutters (single-ended load) P5/16-P13/9 R8/17-R40/17 64

65 117 mm Facing cap bracket Facing cap bracket for facing caps of firms Veka and Rehau and for mini bracket 100,5 mm 90 mm 75 mm Item Number P5/16-P9/13 R8/17-R20/ mm Plaster bracket Plaster bracket, complete for mounting pin 3/20 40 mm 23 mm 55 mm Item Number mm Drives for roller shutters (single-ended load) P5/20-P13/9 R8/17-R30/17 65 mm 52 mm Retrofit plate Retrofit plate for plaster bracket for mounting pin 3/20 42 mm 70 mm Item Number Drives for roller shutters (single-ended load) P5/20-P13/9 R8/17-R30/17 65

66 Wall Bracket Plates and Awning Plates for Tubular Drives, Types P5/16 - P13/9 and R8/17 - R50/11 80,5 mm 67 mm 13,5 mm 67 mm 80,5 mm Plate bearing Plate bearing, complete for mounting pin 3/20 Item Number mm 12 mm 7 mm Drives for roller shutters (single-ended load) P5/20-P13/9 R8/17-R30/17 50 mm 43 mm Conversion kit complete conversion kit for mortar bracket with mounting pin 3/20 Item Number ,5 mm Drives for roller shutters (single-ended load) P5/20-P13/9 R8/17-R40/ mm 98 mm 98 mm 120 mm Plate bearing Plate bearing, complete for mounting pin 3/20 Item Number mm 10 mm 6,5 mm 12,5 mm Drives for roller shutters (single-ended load) P5/20-P13/9 R8/17-R40/17 66

67 100,5 mm 85 mm 85 mm 100,5 mm Motor bearing Motor bearing for facing cap for mounting pin 3/20 18 mm Item Number Ø 5,5 mm Ø 9 mm Drives for roller shutters (single-ended load) P5/20-P13/9 R8/17-R40/17 Awning plate Awning plate M6 with centering edge guide for mounting pin 3/20 11,5 mm M6 48 mm 60 mm Item Number Drives for roller shutters (single-ended load) P5/20-P13/9 R8/17-R40/17 Drives for awnings (single-ended load) P5/20-P13/9 R8/17-R40/17 Drives for winter garden sunshades (alternating load) R8/17-R20/17 Awning plate Awning plate M6 without centering edge guide for mounting pin 3/20 11,5 mm M6 48 mm 60 mm Item Number Drives for roller shutters (single-ended load) P5/16-P13/9 R8/17-R40/17 Drives for awnings (single-ended load) P5/20-P13/9 R8/17-R40/17 Drives for winter garden sunshades (alternating load) R8/17-R20/17 67

68 Wall Bracket Plates and Awning Plates for Tubular Drives, Types P5/16 - P13/9 and R8/17 - R50/11 Awning plate Awning plate M8 with centering edge guide for mounting pin 3/20 Item Number ,5 mm M8 48 mm 60 mm Drives for roller shutters (single-ended load) P5/16-P13/9 R8/17-R40/17 Drives for awnings (single-ended load) P5/20-P13/9 R8/17-R40/17 Drives for winter garden sunshades (alternating load) R8/17-R20/17 Awning plate Awning plate M8 without centering edge guide for mounting pin 3/20 Item Number ,5 mm M8 48 mm 60 mm Drives for roller shutters (single-ended load) P5/16-P13/9 R8/17-R40/17 Drives for awnings (single-ended load) P5/20-P13/9 R8/17-R40/17 Drives for winter garden sunshades (alternating load) R8/17-R20/17 68

69 Box brackets and system brackets for Tubular Drives, Types P5/16 - P13/9 and R8/17 - R50/11 Wall bearing plate with snap-in locking Wall bearing plate with snap-in locking for mini bracket Ø 74 mm 60,4 mm Item Number Drives for roller shutters (single-ended load) P5/16-P13/9 R8/17-R25/ Wall bearing plate with snap-in locking 2 Wall bearing plate with snap-in locking for mini bracket Ø 74 mm 60,4 mm Item Number Drives for roller shutters (single-ended load) P5/16-P13/9 R8/17-R25/ Wall bearing plate with snap-in locking Veka Wall bearing plate with snap-in locking for mini bracket and VEKA head Item Number Drives for roller shutters (single-ended load) P5/16-P13/9 R8/17-R25/17 69

70 Box brackets and system brackets for Tubular Drives, Types P5/16 - P13/9 and R8/17 - R50/11 Wall bearing plate with snap-in locking Kömmerling Wall bearing plate with snap-in locking for mini bracket and Kömmerling head Item Number Drives for roller shutters (single-ended load) P5/16-P13/9 R8/17-R25/17 Wall bearing plate with snap-in locking Thyssen Wall bearing plate with snap-in locking for mini bracket and Thyssen head Item Number Available as of middle 2006 Drives for roller shutters (single-ended load) P5/16-P13/9 R8/17-R25/17 85 mm 14 mm Plate bearing Plate bearing 85x85 for B bracket Item Number mm Drives for roller shutters (single-ended load) R8/17-R40/17 70

71 82 mm 66 mm 48 mm Ø 7,5 mm M 6 35 mm Plate bearing Plate bearing for B bracket Item Number mm 5 mm 20 mm Drives for roller shutters (single-ended load) 8/17-R40/17 Offset box bracket Offset box bracket for mounting pin 3/20 Item Number R8/17R-R40/17R R12/17M-R40/17M 71

72 Wall Bracket Plates and Awning Plates for Tubular Drives, Types R44/14 - R120/11 6 mm 8 mm 75 mm 13 mm 9 mm 113 mm Box bracket Box bracket with star mounting, for mounting pins 1/16, 2/16 and 4/16 Item Number mm 9 mm Drives for roller shutters (single-ended load) R44/14-R120/11 12 mm 50 mm Ø7 Ø8,5 60 mm 100 mm 120 mm Drive bearing Drive bearing with star mounting, for mounting pins 1/16, 2/16 and 4/16 Item Number mm 40 mm M6 48 mm 66 mm Awning plate Awning plate with star mounting M6 for mounting pins 1/16, 2/16 and 4/16 Item Number

73 12 mm 40 mm M8 48 mm 66 mm Awning plate Awning plate with star mounting M8, for mounting pins 1/16, 2/16 and 4/16 Item Number Awning plate Awning plate flat with star mounting M6 for pin 1/16 and 2/16 Item Number Antriebe für Rollläden (einseitige Last) R44/14-R120/11 23 mm 128 mm 63 mm 9 mm 9 mm 70 mm 13 mm Multi-purpose wall bracket plate Multi-purpose wall bracket plate for mounting pin 3/25 Item Number Drives for roller shutters (single-ended load) R44/14-R60/11 73

74 Wall Bracket Plates and Awning Plates for Tubular Drives, Types R44/14 - R120/ mm 98 mm 12,5 mm 98 mm 120 mm Plate bearing Plate bearing, complete for mounting pin 3/25 Ø8 24 mm 6,5 mm Ø12 Item Number Drives for roller shutters (single-ended load) R44/14-R120/11 24 mm 13 mm 109 mm Combination bearing Combination bearing for mounting pin 3/25 55 mm 9 mm 70 mm 9 mm Item Number Drives for roller shutters (single-ended load) R44/14-R120/11 4 mm 50 mm Plaster bracket Plaster bracket, complete for mounting pin 3/ mm 32,5 mm Item Number mm Drives for roller shutters (single-ended load) R44/14-R60/11 74

75 2 mm 100,5 mm 85 mm 85 mm 100,5 mm Drive bearing Drive bearing for facing caps for mounting pin 3/25 23,5 mm Item Number Ø 5,5 mm Ø 9 mm Drives for roller shutters (single-ended load) R44/14-R60/11 100,5 mm 85 mm 85 mm 100,5 mm Drive bearing Drive bearing for facing caps for mounting pin 3/25 23 mm Item Number Ø 5,8 mm Drives for roller shutters (single-ended load) R44/14-R80/11 19,7 mm 48 mm 60 mm Awning plate Awning plate M6 with centering edge guide for mounting pin 3/25 Item Number Drives for awnings (single-ended load) R44/14-R80/11 M6 Drives for winter garden sunshades (alternating load) R44/14-R50/17 75

76 Wall Bracket Plates and Awning Plates for Tubular Drives, Types R44/14 - R120/11 19,7 mm M6 48 mm 60 mm Awning plate Awning plate M6 without centering edge guide for mounting pin 3/25 Item Number Drives for awnings (single-ended load) R44/14-R80/11 Drives for winter garden sunshades (alternating load) R44/14-R50/17 19,7 mm M8 48 mm 60 mm Awning plate Awning plate M8 with centering edge guide for mounting pin 3/25 Item Number Drives for awnings (single-ended load) R44/14-R80/11 Drives for winter garden sunshades (alternating load) R44/14-R50/17 19,7 mm M8 48 mm 60 mm Awning plate Awning plate M8 without centering edge guide for mounting pin 3/25 Item Number Drives for awnings (single-ended load) R44/14-R80/11 Drives for winter garden sunshades (alternating load) R44/14-R50/17 76

77 4 mm 100,5 mm 85 mm 85 mm 100,5 mm Plate bearing Plate bearing for B bracket 21 mm Item Number Ø 5,5 mm Drives for roller shutters (single-ended load) R44/14-R80/11 77

78 Universal wall brackets for all model series 80 mm 190 mm 33 mm 50 mm 124 mm Wall bracket Wall bracket M6 for roller shutter doors Item Number mm 190 mm 33 mm 50 mm 124 mm Wall bracket Wall bracket M8 for roller shutter doors Item Number

79 Safety Brakes for Roller Shutters and Doors Safety brake* TA-=-RD/Z, square mounting, 13 mm max. operational torque: 145 Nm, max. operational number of revolutions: 15, max. catch momentum: 365 Nm Item Number Shaft bolt Shaft 60, square mounting, 13 mm Item Number mm 42,5 mm 52,5 mm 62,6 mm Safety brake* TA-=-RD/Z, square mounting, 16 mm max. operational torque: 145 Nm, max. operational number of revolutions: 15, max. catch momentum: 365 Nm Item Number ,5 mm 130 mm 85 mm 105 mm 125 mm Ø 13,15 mm Shaft bolt Shaft S70, square mounting, 16 mm Item Number Shaft bolt Shaft 125, square mounting, 16 mm Item Number Mounting plate for lateral connection Item Number Mounting plate for installation as pedestal bearing Item Number * Please pay attention to the maximum allowed torque resp. the maximum allowed catch momentum. 79

80 52,5 mm 52,5 mm 52,5 mm Accessories for Tubular Drives with Hand Crank Connection, Types R12/17HK - R120/11HK 70 mm 6-kt. SW7 Eye with hexagonal bar Eye with hexagonal bar SW 7 mm Item Number mm 6-kt. SW7 Eye with hexagonal bar Eye with hexagonal bar SW 7 mm Item Number mm 6-kt. SW7 Eye with hexagonal bar Eye with hexagonal bar SW 7 mm Item Number

81 52,5 mm 330 mm 450 mm 6-kt. SW7 Eye with hexagonal bar Eye with hexagonal bar SW 7 mm, may be shortened Item Number Extension rod Extension rod, hexagonal SW 7 mm Item Number mm Ø12 mm 6-kt. SW7 Connection sleeve Connection sleeve with hexagon socket, SW 7 mm Item Number

82 Accessories for Tubular Drives with Hand Crank Connection, Types R12/17HK - R120/11HK 315 mm Rocker bearing with hexagonal bar 90 rocker bearing with hexagonal bar SW 7 mm Connection pin for crank Ø 12 mm Ø12 mm Item Number Note: Accessories for fixed-mounted cranks only 315 mm Rocker bearing with hexagonal bar 45 rocker bearing with hexagonal bar SW 7 mm Connection pin for crank Ø 12 mm Ø12 mm Item Number Note: Accessories for fixed-mounted cranks only 200 mm 1600 mm Pivoting crank Item Number Note: Fixed-mounted cranks Connection for pivoting crank Pivoting crank Item Number Note: Accessories for fixed-mounted cranks Item No.:

83 315 mm Rocker bearing with hexagonal bar 90 rocker bearing with hexagonal bar SW 7 mm, connecting eye Item Number Note: Accessories for detachable cranks only 200 mm 1600 mm Pivoting crank, long Item Number Note: Detachable cranks 200 mm 660 mm Pivoting crank, short Item Number Note: Detachable cranks 83

84 Accessories for Tubular Drives with Hand Crank Connection, Types R12/17HK - R120/11HK 40 mm 200 mm 1400 mm Awning crank Item Number Note: Detachable cranks 12 mm 5mm Connecting element HC connecting element, with 16 mm square mounting Item Number mm 16 mm 16 mm Drives for roller shutters (single-ended load) R12/17-R120/11 (Always take into account that the wall bracket plates have certain restrictions) Drives for awnings (single-ended load) R12/17-R120/11 (Always take into account that the awning plates have certain restrictions) 40 mm 23 mm 86 mm 105 mm Connecting element HC connecting element with round mounting pin (3/25) Item Number Drives for roller shutters (single-ended load) R44/14-R120/11 (Always take into account that the wall bracket plates have certain restrictions) Drives for awnings (single-ended load) R12/17-R80/11 (Always take into account that the awning plates have certain restrictions) 84

85 105 mm 66 mm 30 mm 48 mm Awning plate Awning plate HK M6, complete with fastening screws to HK Item Number M6 8 mm Drives for awnings (single-ended load) R44/14-R120/ mm 66 mm 30 mm 48 mm Awning plate Awning plate HK M8, complete with fastening screws to HK Item Number M 8 8 mm Drives for awnings (single-ended load) R44/14-R120/11 100,5 mm 85 mm 100,5 mm 85 mm Adapter plate Adapter plate HK, complete with fastening screws (for facing caps) Ø 86 Ø8 mm Item Number Drives for roller shutters and rollerdoors (single-ended load) R44/14-R120/11 85

86 Accessories for Tubular Drives with Hand Crank Connection, Types R12/17HK - R120/11HK 10 mm Ø9 mm Ø22 mm 69,5 mm 31mm 100 mm 151 mm 60,8 mm 100 mm 132 mm Adapter plate Plate bearing, complete with adapter plate and fastening screws Item Number mm 10 mm 80 mm 100 mm 60,8 mm 88 mm Drives for roller shutters and rollerdoors (single-ended load) R44/14-R120/11 Insert system HK insert guide for hexagonal bar Item Number

87 Wall Bearing Plates for Tubular Drives, Types R12/17HK - R120/11HK 6 mm 8 mm Box bracket Box bracket with square mounting, for HK connecting element (16 mm square) 75 mm 9 mm 40 mm 13 mm 9 mm 113 mm Item Number Drives for roller shutters (single-ended load) R12/17-R120/11 in combination with a connecting element (Page 87) Item Number mm Drive bearing Drive bearing with square mounting, for HK connecting element (16 mm square) 50 mm Item Number Ø7 Ø8,5 60 mm 100 mm 120 mm Drives for roller shutters (single-ended load) R12/17-R120/11 in combination with a connecting element (Page 87) Item Number mm 98 mm Plate bearing Plate bearing for HK connecting element (with round mounting pin 3/25) 12,5 mm 98 mm 120 mm Item Number Ø8 24 mm 6,5 mm Ø12 Drives for roller shutters (single-ended load) R12/17-R120/11 in combination with a connecting element (Page 87) Item Number mm Combination bearing Combination bearing for HK connecting element (with round mounting pin 3/25) 109 mm Item Number mm 13 mm 9 mm 70 mm 9 mm Drives for roller shutters (single-ended load) R12/17-R120/11 in combination with a connecting element (Page 87) Item Number

88 Order Form Tubular Drives Despatch address Customer ID. Company Address Town/city, Postcode Ordering party Order No./Consignment Company Contact person Address Town/city, Postcode Telephone Delivery by Parcel post Forwarding agent Fixed time deliv. by forwarding agent hrs Standard post c.o.d TNT hrs Requested delivery date (of dispatch from Becker) Fax number: Becker Exports Department: +49 (0 ) 27 72/ Quantity Drive Type (M, R,...) Item No. Mounting pin/ bracket Item No. Drive adapter/ Ring Item No. Price in Comments Becker Internal Reference No. Handling Note 88

89 Order Form Mechanical Accessories Despatch address Customer ID. Company Address Town/city, Postcode Ordering party Order No./Consignment Company Contact person Address Town/city, Postcode Telephone Delivery by Parcel post Forwarding agent Fixed time deliv. by forwarding agent hrs Standard post c.o.d TNT hrs Requested delivery date (of dispatch from Becker) Fax number: Becker Exports Department: +49 (0 ) 27 72/ Quantity Discription Item No. Price in Quantity Discription Item No. Price in Comments Becker Internal Reference No. Handling Note 89

90 General Terms and Conditions of Sale Clause 1 Applicability of Terms and Conditions As from 1 January 2005, all contractual relations between BECKER-Antriebe GmbH (hereinafter also referred to as the "Manufacturer") and its customers (hereinafter also referred to as the "Buyer") shall be exclusively governed by the following Standard Terms and Conditions of Sale. They shall also govern all business relations formed in the future, even if this has not been expressly agreed. The Buyer shall be deemed to have accepted these Terms and Conditions on ordering the goods on the basis of the Manufacturer's offers/quotations. Any counter acknowledgements by the Buyer with reference to its own terms and conditions of business or terms and conditions of sale are hereby rejected. They shall only apply if the Manufacturer has expressly agreed to them beforehand. All agreements between the Manufacturer and the Buyer for the purpose of executing the order must be recorded in writing. Clause 2 Quotations and placing orders Quotations provided by the Manufacturer that are not expressly designated as binding in written form are subject to change without notice. The Buyer's orders shall be held to be offers to form a contract and shall be binding on the Buyer. The documents belonging to the offer, such as catalogues, illustrations, drawings, weights and measurements, are only approximate unless they are expressly designated as binding and as long as the utility and the functionality of the goods, as agreed by contract, are not impaired by subsequent deviations. The Manufacturer reserves rights of ownership and copyright to cost estimates, drawings, samples and other documents. They may not be made accessible to third parties. If the Buyer has designated certain plans as confidential, the Manufacturer may only make them available to third parties if the Buyer has given its consent. Clause 3 Prices In as far as nothing else is stated in the acknowledgement of the order, the prices are quoted ex works, including loading at the works. However, they do not include packaging, freight charges, postage and insurance. The Manu - facturer shall only insure the goods against damage during transport at the Buyer's express wish and for the Buyer's account. The prices do not include statutory value added tax. Value added tax shall be added at the statutory rate on the date that the invoice is issued and shown separately in the invoice. Additional deliveries or services shall be charged separately. Clause 4 Time allowed for performance and delivery Binding dates or time limits for delivery or the performance of services must be agreed in writing. If the delivery or the services are delayed, either partially or completely, due to circumstances that are not the fault of the Manufacturer, particularly due to Acts of God such as traffic disturbances, strikes, fire, water damage, power cuts, operational disturbances, measures taken by the authorities, lock-outs, shortage of material or other unavoidable incidents, the Manufacturer shall have the right to extend the delivery period for as long as the impediment lasts, plus a reasonable start-up time, or to terminate the contract, either in part or in full, as regards that part of the contract which has not yet been performed. If the impediment lasts for longer than three months, the Buyer, after setting a reasonable extended deadline, shall have the right to terminate the contract as regards that part of the contract that has not yet been performed. If the delivery period is extended or if the Manufacturer is released from its obligation, the Buyer may not use this as a reason to claim damages. If the Manufacturer is to comply with its obligations in relation to delivery and the performance of services, the Buyer must duly fulfil its own obligations in good time. If the Buyer delays in accepting the goods, the Manufacturer shall have the right to claim compensation for the damage sustained. As soon as the Buyer is late in accepting the goods, the risk of their accidental deterioration and accidental destruction shall pass to the Buyer. Clause 5 Partial deliveries The Manufacturer shall at all times have the right to make partial deliveries and render partial services. Clause 6 Industrial property rights of third parties If the Manufacturer is obliged to deliver the goods according to the Buyer's specifications (drawings, models, samples, sketches etc.), the Buyer must guarantee that this will not infringe any industrial property rights applicable to third parties. If the Buyer is in wilful or negligent breach of its obligations, the Buyer must indemnify the Manufacturer against any claims made by third parties. Clause 7 Passage of risk In as far as nothing else is stated in the acknowledgement of the order, the risk of the consignment becoming lost or damaged shall pass to the Buyer when the consignment is handed over to the forwarding agent, the carrier or any other person or body engaged to effect shipping. After the passage of risk, the Buyer shall bear the risk for any loss of or damage to the consignment or to the work. Clause 8 Warranty The following provisions apply to claims made under warranty if there should be any damage to drives for roller shutters, sunshades/awnings and doors as well as their control components: 1. General 1.1 These terms of warranty and guarantee are valid for products that are used in roller shutter, sunshade/awning and door systems. 1.2 The Manufacturer guarantees that any defects in new products shall be repaired during a period of 2 years in accordance with the statutory provisions in as far as nothing else is agreed in these Standard Terms and Conditions of Sale. The warranty period shall be one year in the case of second-hand products. 1.3 In order for a claim to be made under the warranty, a defect that is the fault of the Manufacturer must be identified during an inspection on the Manufacturer's premises. 1.4 The warranty period shall commence on the delivery of our products to our customers. 1.5 No claim may be made under the warranty if an inspection in accordance with point 1.3. reveals that the complaint is based on improper handling of the product or if the defect is not the fault of the Manufacturer for other reasons. 1.6 If a defect is ascertained, the Manufacturer shall have the right to first make three attempts at subsequent correction. The Manufacturer reserves the right to decide whether a repair shall be carried out, whether to provide a replacement for the equipment or whether to deliver a new piece of equipment. 1.7 If the attempt at subsequent correction has finally failed, the Buyer, after setting a deadline, may exercise the rights set out in Section 437 points 2 and 3 of the German Civil Code (Bürgerliches Gesetzbuch). The deadline must be set in writing; the time limit must be reasonable and be at least 14 working days. If the Buyer has a statutory right of rescission, this shall only obviate the obligation to provide compensation for lost value under Section 346 (3) point 3 of the German Civil Code if the Buyer has exercised the care of a conscientious businessman. 1.8 The Manufacturer's right to make subsequent correction shall not lapse until damages are paid, even if the Buyer has first made a request to this effect. 1.9 Claims under warranty shall be exclusively governed by the law of the Federal Republic of Germany. The provisions of the UN Sales Convention shall not apply In purchasing the Manufacturer's products, the Buyer acknowledges the terms of the warranty and the guarantee in their currently applicable form. 2. Guarantee for drive mechanisms for roller shutters and sunshades/ awnings 2.1 In addition, the Manufacturer gives a three-year guarantee beyond the term of the warranty. 90

91 2.2 Drive mechanisms will be repaired free of charge for a period of 5 years as from the date of manufacture. The decision whether to carry out a repair, to provide a replacement of equivalent value for the equipment or whether to deliver a new piece of equipment shall be taken by the Manufacturer on the basis of economic considerations. 2.3 The Manufacturer shall not bear any further costs. 3. Obligation to inspect the goods and give notification of defects In relation to all deliveries and services provided by the Manufacturer the Buyer undertakes to inspect the goods and give notification of defects in accordance with Section 377 of the German Commercial Code (Handelsgesetzbuch). Section 377 of the German Commercial Code shall apply accordingly if a contract for work and services is formed. After accepting the service or after the passage of risk in relation to the product, the Buyer must immediately inspect the product to ascertain whether it is in good working condition and must immediately (within 10 days) give the Manufacturer comprehensible written notification of any defects found. After the expiry of this time limit, the goods shall be deemed to have been free of defects at the time of the passage of risk. The Buyer must provide the Manufacturer with all information and verifiable documents that are necessary in order to ascertain the defects. If the Manufacturer inspects the goods and fails to find any defect, the Buyer shall bear the costs of such an inspection. Clause 9 Reservation of title Until the satisfaction of all claims that the Manufacturer may have against the Buyer, now or in the future and on any legal grounds (including all balance claims from a current account), the Manufacturer shall be granted the following securities, which it shall release on request in as far as their value permanently exceeds the sum of the claims by more than 10%, the Manufacturer having the right to choose which securities to release. The goods shall remain the property of the Manufacturer. Any processing or redesign of the goods shall always be carried out for the Manufacturer as Manufacturer, but without implying any obligation on the Manufacturer's part. If the Manufacturer's (co-) ownership of the goods should lapse due to their being amalgamated with other goods, it is hereby agreed that the Buyer's (co-) ownership of the amalgamated item shall pass to the Manufacturer to the extent of the value represented by its own item (the value of the invoice). The Buyer shall store the (jointly owned) property of the Manufacturer free of charge. Goods to which the Manufacturer has a right of (co-) ownership are referred to below as goods under reservation of title. The Buyer has the right to process and sell the goods under reservation of title in ordinary business transactions as long as the Buyer is not in default. It is not permissible to pledge the goods or assign them by way of security. The Buyer hereby assigns to the Manufacturer by way of security all claims in relation to the goods under reservation of title (including all balance claims from a current account) and resulting from the resale of the goods or arising on other legal grounds (insurance, tort). The Manufacturer grants the Buyer revocable powers to collect the claims assigned to the Manufacturer for the Manu facturer's account in the Buyer's own name. This authorisation to collect claims may only be revoked if the Buyer does not duly comply with its payment obligations. If third parties attempt to take possession of the goods under reservation of title and particularly in the case of attachment, the Buyer must draw their attention to the fact that they are the property of the Manufacturer and immediately notify the Manufacturer so that the Manufacturer may enforce its rights of ownership. If the third party is not in a position to reimburse the Manufacturer for the costs incurred in this connection, either in or out of court, the Buyer shall be liable for such costs. If the Buyer is in breach of its contractual obligations particularly in the case of late payment the Manufacturer shall have the right to demand the surrender of the goods under reservation of title or, if applicable, to demand the assignment of the Buyer's claims to the surrender of the goods by third parties. If the Manufacturer takes back or seizes the goods under reservation of title, this shall not mean that the Manufacturer has rescinded the agreement. Clause 10 Payment In the absence of any other agreement the Manufacturer's invoices are payable within 30 days of the date of the invoice without any deductions. If payment is made within 10 days of the date of the invoice, the Manufacturer shall grant the Buyer a cash discount of 2%. If delivery is made to a country other than Germany, the Manufacturer shall have the right to demand that the Buyer provide an absolute guarantee of unlimited duration from a German bank to cover the value of the goods in order to secure the Manufacturer's claims to payment. In the case of partial deliveries or partial services, the Manufacturer shall have the right to charge for the services already rendered. If the Buyer does not punctually comply with its payment obligations in relation to partial deliveries or partial services, the Manufacturer shall have the right to withhold further partial deliveries or partial services or to make further partial deliveries only in return for cash on delivery (C.O.D.) or at the Buyer's expense. In as far as the Manufacturer has justified doubts concerning the Buyer's creditworthiness or if the Buyer has been late in paying for a previous delivery or partial delivery, the Manufacturer shall have the right to make partial deliveries only in return for cash on delivery (C.O.D.) or at the Buyer's expense. The Buyer shall not have any right of retention or the right to set off claims against the Manufacturer's claims to payment unless these are recognised or undisputed counterclaims or unless they have been established by a final court judgment. If the Buyer is late in paying the invoices, the Manufacturer shall have the right to claim interest at a rate of 10% above the applicable base rate of the European Central Bank in damages as from the date that the claim becomes due for payment. The interest shall be charged at a lower rate if the Buyer proves that the actual loss was lower. The Manufacturer shall be entitled to prove that the loss was greater. Clause 11 Limitation of liability Claims to damages regardless of the legal grounds shall be excluded both against the Manufacturer and against its vicarious agents in as far as they have not acted with wilful intent or gross negligence. In the case of a grossly negligent act or omission, the Manufacturer's liability shall be limited to the typical, foreseeable damage. In the case of an ordinary negligent breach of major contractual obligations through an act or an omission on the part of non-executive staff, the Manufacturer's liability shall be limited to the typical, reasonably foreseeable damage. At no event shall this affect the Manufacturer's liability for death, physical injury or damage to health, liability under the Product Liability Act and other claims arising from its liability as producer and claims under any Manufacturer's guarantee. If the Buyer invokes the Manufacturer's guarantee, the Buyer shall bear the burden of proving the damage is covered by the terms of the guarantee. The provision in clause 11 shall also apply to the Buyer's claims to damages in connection with control components and drives for doors, roller shutters and sunshades/awnings. Clause 12 Liability for defects on processing materials provided When processing materials provided, the Manufacturer shall not be liable for defects resulting from the behaviour of the material. If parts provided are unfit for use due to material defects or other defects occurring during processing, the Manufacturer must be compensated for the processing costs. Clause 13 Applicable law, place of jurisdiction, severability These Terms and Conditions of Sale and all legal relations between the Manufacturer and the Buyer shall be governed by the law of the Federal Republic of Germany. The provisions of the UN Sales Convention shall not apply. In as far as the Buyer deals as a business (a "full merchant" in the meaning of the German Commercial Code), is a legal person under public law or a special public fund, the Manufacturer's principal place of business shall be the sole place of jurisdiction for all disputes directly or indirectly arising under the contractual relations. The same shall apply if the Buyer has no general place of jurisdiction in Germany or if the Buyer's place of residence or usual place of abode is not known at the time that legal action is brought. If any term of these Terms and Conditions of Sale or any term of other contracts should be or become void, this shall not affect the validity of any other terms or agreements. In this case, the completely or partially void term shall be replaced by a term which is valid and whose commercial purpose comes as close as possible to that of the invalid term. Status: 1 January

92 Notes 92

93 Notes 93

94 94

95

96 Possible Combinations of Connecting Elements and Wall Brackets Example: Drive P5/16 with connection mini-bracket M6/48 mounted to the drive head and combined with wall bracket with snap in locking for mini-bracket Tubular drive P5/xx - P13/xx R8/xx - R50/xx R44/xx - R120/xx HK Connecting element (operating head mounted) Name Square mount. 10 mm Round mount. ø 20 mm Mini bracket M6/48 Mount. pin 1/10 Mount. pin 2/10 Mount. pin 3/20 Mount. pin 4/16 Mini bracket M6/48 B bracket Mount. pin 1/16 Mount. pin 2/16 Mount. pin 3/25 B bracket Square mount.16 mm Round mount. 3/25 Storage label Page Box bracket 1/10, 2/10 Plaster bracket 1/10, 2/10 Awning plate star 1/10, 2/10 Awning plate 1/10, 2/10 Multi-purpose wall br. plate 3/20 Box bracket 3/20 Plaster bracket 3/20 Retrofit plate 3/20 Plate bearing 3/20 Plate bearing 3/20 Motor bearing 3/20 Awning plate M6, 3/20 Awning plate M8, 3/20 Wall bear. plate snap-in-lock. for mini bracket Plate bearing 85x85 for B bracket Plate bearing for B bracket Offset box bracket 3/20 Box bracket star, 1/16, 2/16, 4/16 Awning plate star, 1/16, 2/16, 4/ /

97 Possible Combinations of Connecting Elements and Wall Brackets Example: Drive P5/16 with connection mini-bracket M6/48 mounted to the drive head and combined with wall bracket with snap in locking for mini-bracket Tubular drive P5/xx - P13/xx R8/xx - R50/xx R44/xx - R120/xx HK Connecting element (operating head mounted) Name Square mount. 10 mm Round mount. ø 20 mm Mini bracket M6/48 Mount. pin 1/10 Mount. pin 2/10 Mount. pin 3/20 Mount. pin 4/16 Mini bracket M6/48 B bracket Mount. pin 1/16 Mount. pin 2/16 Mount. pin 3/25 B bracket Square mount.16 mm Round mount. 3/25 Storage label Page Awning plate M6, star, 1/16, 2/16, 4/16 Awning plate M8, star, 1/16, 2/16, 4/16 Multi-purpose wall br. plate 3/25 Plate bearing 3/25 Combination bearing 3/25 Plaster bracket 3/25 Drive bearing 3/25 Drive bearing 3/25 Awning plate M6, 3/25 Awning plate M8, 3/25 Plate bearing for B bracket /

98 BECKER-Antriebe GmbH Friedrich-Ebert Str Sinn Deutschland Tel.: +49 (0) 27 72/ Fax: +49 (0) 27 72/

Making the automation of roller shutters and sun protection systems easier.

Making the automation of roller shutters and sun protection systems easier. Making the automation of roller shutters and sun protection systems easier. Complete catalogue for drives, control units and accessories from BECKER. Our greatest strength: finding ways to make your job

More information

Making complex building automation simpler together.

Making complex building automation simpler together. Making complex building automation simpler together. KNX/SMI tubular drives for roller shutters and sun protection: with Becker. 2 Your own living room is a very special place. Here you can be who you

More information

SELVE always has the right drive. Electronic motors for roller shutters and awnings: everything the professional needs

SELVE always has the right drive. Electronic motors for roller shutters and awnings: everything the professional needs SELVE always has the right drive. Electronic motors for roller shutters and awnings: everything the professional needs SELVE-SE-motors. Provide security in every life situation Stay secure Closed roller

More information

P5/20M - P13/9M R7/17M - L120/11M

P5/20M - P13/9M R7/17M - L120/11M P5/20M - P13/9M R7/17M - L120/11M en Assembly and Operating Instructions Roller Shutter and Awning Drives with mechanic limit switching Important information for: Fitters Electricians Users Please forward

More information

Roller shutters and awning operators Convenient controls for comfortable living

Roller shutters and awning operators Convenient controls for comfortable living Roller shutters and awning operators Convenient controls for comfortable living 2 About SOMMER About SOMMER WE DELIVERY THE QUALITY YOU ENJOY THE CONVENIENCE! With reliable gate operators from SOMMER,

More information

Mechanical Motors. We offer the complete programme! Mechanical Motors for roller shutters and awnings: everything the professional needs

Mechanical Motors. We offer the complete programme! Mechanical Motors for roller shutters and awnings: everything the professional needs Mechanical Motors. We offer the complete programme! Mechanical Motors for roller shutters and awnings: everything the professional needs Mechanical Motors. Convincingly simple, comfortable and reliable.

More information

Assembly and Operating Instructions Tubular drives for sunshades

Assembly and Operating Instructions Tubular drives for sunshades R8/17C PS - L120/11C en Assembly and Operating Instructions Tubular drives for sunshades New: With pluggable Becker connecting cable Important information for: Fitters Electricians Users Please forward

More information

Roller Shutter Door Kits. Diversity in profiles

Roller Shutter Door Kits. Diversity in profiles Roller Shutter Door Kits - fast online configuration - certified according to DIN EN 13241-1 - high quality components - everything from one source Diversity in profiles Roller shutter door kits Configuration

More information

Roller Shutter Guide. Radio Motors with Wireless Controls

Roller Shutter Guide. Radio Motors with Wireless Controls Roller Shutter Guide Radio Motors with Wireless Controls Technology an integral part of everyday life Introducing the next generation roller shutter motor and control solutions from SWS UK. In todays world,

More information

Roller Shutter Guide. Radio Motors with Wireless Controls

Roller Shutter Guide. Radio Motors with Wireless Controls Roller Shutter Guide Radio Motors with Wireless Controls Technology an integral part of everyday life Introducing the next generation roller shutter motor and control solutions from SWS UK. In todays world,

More information

Roller shutter systems Built-on roller shutters and solutions integrated into the facade

Roller shutter systems Built-on roller shutters and solutions integrated into the facade Roller shutter systems Built-on roller shutters and solutions integrated into the facade The energy saving programme for new constructions and renovations High-end products made of long-lasting, non-corroding

More information

Marantec Openers for Industrial Sectional Doors

Marantec Openers for Industrial Sectional Doors Marantec Openers for Industrial Sectional Doors STA1 STAC1 www.marantec.com Industrial Sectional Door Opener with Integrated Control Unit Our STA openers with an integrated or external control unit are

More information

Glass sensors 35. Supplementary products 39

Glass sensors 35. Supplementary products 39 Understatement is an art, and the makes it perfect. Up to eight functions are concealed under a pure surface that is practically flush with the wall, and can be custom-labelled on request. A single touch

More information

SAFEGUARD Roller Shutter Systems

SAFEGUARD Roller Shutter Systems SAFEGUARD Roller Shutter Systems Designed and manufactured for building security New Doors, Repairs, Service & Maintenance Shutter Curtain Specification SAFEGUARD 76 SOLID Constructed from 76mm galvanised

More information

Garage Door Automation

Garage Door Automation Garage Door Automation Controlling your garage door has never been easier. www.bnd.com.au The name Australia knows and trusts Home means different things to different people. A place to relax and unwind,

More information

High Security Roller Shutters. factories retail shops loading bays warehouses industrial units

High Security Roller Shutters. factories retail shops loading bays warehouses industrial units High Security Roller Shutters Where higher levels of security is a main concern, the LPS1175 approved Centurion Shutter resists attempts at forced entry from SR1 right up to SR4 to combat the most determined

More information

KNX Building Automation

KNX Building Automation KNX A building which can think for itself? The future is here. Our building automation offer in Tebis.KNX can turn a building into an intelligent machine. It provides true control of heating, lighting

More information

ROLLER SHUTTER DOORS EXTRUDED ALUMINIUM - SELF-BLOCKING - PROFILED ALUMINIUM

ROLLER SHUTTER DOORS EXTRUDED ALUMINIUM - SELF-BLOCKING - PROFILED ALUMINIUM feel the space ROLLER SHUTTER DOORS EXTRUDED ALUMINIUM - SELF-BLOCKING - PROFILED ALUMINIUM ROLLER SHUTTER DOORS When you buy a home or a commercial area, the first thing you think about is decoration

More information

Product and functional description

Product and functional description Product and functional description The RS 520/23 shutter / blind actuator is a KNX device with one relay output. The device is installed in an AP 118 Control Module Box or an AP 641 Room Control Box. The

More information

Pergola io. The only range of radio motors specifically designed for pergolas. With Somfy, offer pergolas with a difference!

Pergola io. The only range of radio motors specifically designed for pergolas. With Somfy, offer pergolas with a difference! Pergola io The only range of radio motors specifically designed for pergolas With Somfy, offer pergolas with a difference! With Somfy, enjoy a market presence with a difference! Pergola io for all types

More information

Berker TS Sensor Product information

Berker TS Sensor Product information Berker TS Sensor Product information PERFECT COMBINATION EXCLUSIVE DESIGN INNOVATIVE TECHNOLOGY Even at first glance the Berker TS Sensor is anything but a conventional switch. Its glass surface is completely

More information

Roller shutter systems Built-on roller shutters and solutions integrated into the facade

Roller shutter systems Built-on roller shutters and solutions integrated into the facade Roller shutter systems Built-on roller shutters and solutions integrated into the facade The energy saving programme for new constructions and renovations High-end products made of long-lasting, non-corroding

More information

GRM SERIES. Mechanical stamping and forming machines GRM 80E / GRM 80P

GRM SERIES. Mechanical stamping and forming machines GRM 80E / GRM 80P GRM SERIES Mechanical stamping and forming machines GRM 80E / GRM 80P More economical large-scale production Produce stamped and formed parts in large batches with even higher productivity. Benefit from

More information

Wireless Control Systems

Wireless Control Systems Wireless Control Systems Leading the way in intelligent automation contents Range Overview Typical Installations Transmitters Combined Modules Receivers Accessories Programming Switching & Dimmer Functions

More information

bidirectionally as well as the rotation sense of shafts. With absolute encoders instead, each incremental

bidirectionally as well as the rotation sense of shafts. With absolute encoders instead, each incremental and draw-wire sensors Spot-on and trailblazing technology measure rotation speed, sense, position, angle and length. For this purpose, they convert mechanical motion in electrical signals. There are incremental

More information

InBin-P Pressure switches from 5 Pa Pa

InBin-P Pressure switches from 5 Pa Pa InBin-P Pressure switches from 5 Pa...100 Pa Electrical, binary pressure or differential pressure switches with adjustable switch activation delay 24 VAC/DC supply voltage, potential free switching contact

More information

IDE Load break switches for machine control Remotely trippable switch from 32 to 160 A

IDE Load break switches for machine control Remotely trippable switch from 32 to 160 A The solution for Load break switches > Industry. > Non critical buildings. > Public Access Sites. > High Rise Buildings. ide_021_a_1_cat ide_022_a_1_cat IDE 4x40 A External operation IDE 4x40 A Direct

More information

Electrical actuator AME 855

Electrical actuator AME 855 Data sheet Electrical actuator AME 855 Description Actuator AME 855 can be controlled by electronic controllers with modulating or 3-point control output. Actuator can be used with VF3 valves (DN 200-300).

More information

ROLLING COUNTER SHUTTERS

ROLLING COUNTER SHUTTERS 500 ROLLING COUNTER SHUTTERS EXCEPTIONAL SECURITY AND AESTHETICS WAYNE DALTON COMMERCIAL DOOR SYSTEMS The Wayne Dalton Rolling Counter Shutter system provides the perfect solution for smaller openings

More information

RoHS. High shaft load capacity. Shock / vibration resistant

RoHS. High shaft load capacity. Shock / vibration resistant Due to their sturdy bearing construction in Safety-Lock Design, the Sendix 5000 and 5020 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up

More information

ECS servo system MCS servo motors

ECS servo system MCS servo motors ECS servo system MCS servo motors for multi-axis applications Lenze Global Drive dynamic, powerful, compact ECS, MCS dynamic, powerful, compact The ECS servo system Servo drives with a high overload capacity

More information

Compact single actuator systems for box spring beds

Compact single actuator systems for box spring beds Compact single actuator systems for box spring beds LINAK.COM/HOMELINE Powerful actuator system for box spring beds Electric adjustment of the bed is something you should experience not something you should

More information

VLT The general purpose drive. Phone: Fax: Web: -

VLT The general purpose drive. Phone: Fax: Web:  - MAKING MODERN LIVING POSSIBLE VLT 2800 The general purpose drive The pace-setter among general purpose drives The VLT 2800 series are among the smallest multi-purpose drives in the market, designed for

More information

instabus EIB System Actuator

instabus EIB System Actuator Product name: 4-channel blind/shutter actuator with manual control, 230 V Design: Modular rail-mounting device Item no.: 1048 00 ETS search path: shutter / shutter / shutter/blind actuator 4-gang 230V

More information

Seceuro Range CD38 Built On

Seceuro Range CD38 Built On Seceuro Range CD38 Built On Technical Specifications www.hag.co.uk Advice Line 0800 072 3444 Seceuro Range CD38 Built On What is it made from The Seceuro range offers an all Aluminium Construction Typical

More information

Wireless Key fob, Key pad & Receiver Range

Wireless Key fob, Key pad & Receiver Range Wireless Key fob, Key pad & Receiver Range 4Ch Wireless Receiver 4x Voltage Free relay outputs (NO + NC) 100m Transmission range Multiple user codes 2 Channel wireless control Clear hinge up lid 12V DC

More information

ARPAC HANAGATA L-SERIES

ARPAC HANAGATA L-SERIES ARPAC HANAGATA L-SERIES PACKAGING SOLUTIONS THAT MEAN BUSINESS ARPAC HANAGATA L-SERIES AUTOMATIC L-BAR SEALER 1 STANDARD FEATURES The ARPAC HANAGATA L-SERIES Automatic L-Sealer offers you the latest in

More information

Sense it! Connect it! Bus it! Solve it! ENCODERS

Sense it! Connect it! Bus it! Solve it! ENCODERS Sense it! Connect it! Bus it! Solve it! ENCODERS Incremental encoders Incremental encoders use electrical pulses to measure rotation speed or position. The dual-channel incremental encoders of the Ri series,

More information

Multiturn Kit Encoders Without Batteries or Gears: A Cost-Efficient Approach for Rotary Position Measurement in Servomotors and Rotating Equipment

Multiturn Kit Encoders Without Batteries or Gears: A Cost-Efficient Approach for Rotary Position Measurement in Servomotors and Rotating Equipment Multiturn Kit Encoders Without Batteries or Gears: A Cost-Efficient Approach for Rotary Position Measurement in Servomotors and Rotating Equipment POSITAL is introducing a new set of componentlevel products

More information

Silent Gliss. Roman Blind Systems

Silent Gliss. Roman Blind Systems Roman Blind Systems 2 Battery Operated Roman Blind System Product Information Battery operated, radio controlled Roman blind system for contract and residential applications. Motor contained within headbox.

More information

W Economic: Can be installed quickly and efficiently. W Compact and versatile: Top technology for limited

W Economic: Can be installed quickly and efficiently. W Compact and versatile: Top technology for limited Incremental and Absolute Encoders especially for Drive Technology RoHS 2/22 Complete Solutions for geared motors W Sturdy: Withstands even the toughest conditions. W Economic: Can be installed quickly

More information

Home control system....powered by ROJAL

Home control system....powered by ROJAL Home control system...powered by ROJAL What is the NERO system? NERO is a new type of control system that is capable of controlling the complete sun protection offered by one or several devices as a perfectly

More information

RACO-ELECTRIC CYLINDER MODULAR SYSTEM HEAVY DUTY SERIES (TYPE 1) SIZE 4,5,6,7,8

RACO-ELECTRIC CYLINDER MODULAR SYSTEM HEAVY DUTY SERIES (TYPE 1) SIZE 4,5,6,7,8 SIZE,,,, HIGH-PERFORMANCE ELECTRIC CYLINDERS: ROBUST, RELIABLE AND FLEXIBLE RETRO-FITTING The RACO actuator system is of modular design, and thus enables the combination of the most important integral

More information

Original instructions

Original instructions Original instructions Tubular motor with electronic end point switch off and blockage recognition RoHS compliant 2011/65/EU Valid for the following models: For shaft sizes 40 mm and over: TDEP - 10/14

More information

IT S TIME FOR COMFORT LIVING

IT S TIME FOR COMFORT LIVING IT S TIME FOR COMFORT LIVING LIGHT UP YOUR LIFE WITH FINDER MANAGING YOUR LIGHTING WITH FINDER PRODUCTS MEANS A MORE RESTFUL AND COMFORTABLE ENVIRONMENT, A MORE EFFECTIVE WORKING SPACE AND A MORE EFFICIENT

More information

OptoPulse EIL580. The benchmark for incremental encoders.

OptoPulse EIL580. The benchmark for incremental encoders. OptoPulse EIL580 The benchmark for incremental encoders. OptoPulse EIL580 the established standard. OptoPulse EIL580 sets a benchmark in incremental encoders with 58 mm diameter. Cutting edge sensing technology

More information

Shutter/Blind Controls

Shutter/Blind Controls /2 Inserts /5 /11 Accessories and spare parts /1 Siemens AG 2007 Inserts Selection and ordering data 5TA2 154 (front view) General information Non-insulated parts of inserts covered by molded plastic Self-retracting

More information

L u x u r y S h u t t e r s, L u x u r i o u s L i v i n g.

L u x u r y S h u t t e r s, L u x u r i o u s L i v i n g. L u x u r y S h u t t e r s, L u x u r i o u s L i v i n g What are Window Rolling Shutters? SafeHome shutters ride in tracks mounted on the side of the window. The shutter can be raised or lowered with

More information

Section 8. Electronics. Switches / Switch Plates Switches operate a motorized shutter. Choice of switch is determined by style.

Section 8. Electronics. Switches / Switch Plates Switches operate a motorized shutter. Choice of switch is determined by style. Section 8 Electronics Switches / Switch Plates Switches operate a motorized shutter. Choice of switch is determined by style. Transmitters Transmitters remotely operate shutters. Transmitters are capable

More information

HOMELINE. Product overview LINAK.COM/HOMELINE

HOMELINE. Product overview LINAK.COM/HOMELINE HOMELINE Product overview LINAK.COM/HOMELINE The clever move ZERO technology LINAK uses ZERO technology to lower standby power consumption to just 0.1W. Our CBH control boxes and TWINDRIVE motors with

More information

NT4550S. S: Standard Non Manual. S Series TUBULAR MOTORS. Tel: Fax:

NT4550S. S: Standard Non Manual. S Series TUBULAR MOTORS. Tel: Fax: TUBULAR MOTORS S: Standard Non NT4550S Awning Roller Blinds Projec on Screen Roller Doors Non 45mm in diameter, 8Nm 50Nm Suitable for Window Blinds, Garage Doors, Awnings and small Roller Shu ers up to

More information

P7000 Stepper Drives. P7000 Introduction

P7000 Stepper Drives. P7000 Introduction P7 Introduction P7 Stepper Drives Danaher Motion introduces the P7 Series Stepper Drives. Previously unheard of stepper features allow the P7 to provide true servo-like performance at a fraction of the

More information

LOSS PREVENTION CERTIFICATION BOARD (LPCB) APPROVED PRODUCTS

LOSS PREVENTION CERTIFICATION BOARD (LPCB) APPROVED PRODUCTS LOSS PREVENTION CERTIFICATION BOARD (LPCB) APPROVED PRODUCTS Technical Datasheets www.rocheystems.co.uk E37 ELITE SR1 Insurance-approved shutter suitable for high security domestic and commercial applications

More information

Building Control GAMMA instabus

Building Control GAMMA instabus The worldwide standard for home and building control Building Control GAMMA instabus siemens.com/gamma The comprehensive GAMMA instabus product portfolio comprises intelligent devices and is your key to

More information

gesis FLEX Decentralized room automation Modular Compact Pluggable Room for the future.

gesis FLEX Decentralized room automation Modular Compact Pluggable Room for the future. gesis FLEX gesis FLEX Decentralized room automation Modular Compact Pluggable Room for the future. 2 gesis FLEX Room automation of the future Decentralized room automation with gesis FLEX In terms of flexibility,

More information

Actuator FD61. Product Data Sheet Feature. Option

Actuator FD61. Product Data Sheet   Feature. Option Product Data Sheet www.moteck.com FD61 FD61 is a quiet and powerful actuator designed for use in furniture application. Compared to FD6, the motor size of FD61 is more compact. There are several models

More information

The Four Layers Elevator Control System Design Based on S7-200 PLC Xianjie Feng

The Four Layers Elevator Control System Design Based on S7-200 PLC Xianjie Feng Advances in Engineering Research (AER), volume 107 2nd International Conference on Materials Engineering and Information Technology Applications (MEITA 2016) The Four Layers Elevator Control System Design

More information

FIRE RESISTANT ROLLER SHUTTER DOOR

FIRE RESISTANT ROLLER SHUTTER DOOR FIRE RESISTANT ROLLER SHUTTER DOOR OPERATING & MAINTENANCE INSTRUCTIONS Page 1 Operating Instructions for Phoenix Tube Motor Fire Resisting Roller Shutters Opening and Closing the Shutter This is done

More information

Parts Manual Kleen Sweep 32R Rider Sweeper

Parts Manual Kleen Sweep 32R Rider Sweeper Parts Manual Kleen Sweep 32R Page 2 Table of Contents Side broom R.H., part 1... Side broom R.H., part 2... Front wheel drive... Accelerator... Steering... Seat group... Group of main sweeper roller, part

More information

8200 vector frequency inverter

8200 vector frequency inverter 8200 vector frequency inverter 0.25... 90.0 kw Lenze Global Drive Created as a system 8200 vector created as a system A universal product range offering all you need for user-friendly operation, diagnostics

More information

Surface-Mounting Product Ranges

Surface-Mounting Product Ranges Introduction Overview Light signals SCHUKO socket outlets Two-circuit switches Garages, laundry rooms, laboratories and workshops are often exposed to a lot of heavy-duty activity, which includes the odd

More information

Two-stage lifting column - RKPowerlift

Two-stage lifting column - RKPowerlift Two-stage lifting column - RKPowerlift The power pack for high bending moments Fixing Tapped hole for simple mounting technic design classic design wave design Fixing slot To accommodate clamping bars

More information

Tebis application software

Tebis application software Tebis application software TL207A V 3.x Lighting and Shutters / Blinds TL208A V 3.x Lighting and Shutters / Blinds TL223B V 3.x Shutters TL225B V 3.x Shutters TL224B V 3.x Shutters / Blinds TL226B V 3.x

More information

ROLLER SHUTTER LOUVER WINDOWS. Contact us now for more information on Thailand or visit us at

ROLLER SHUTTER LOUVER WINDOWS. Contact us now for more information on Thailand or visit us at The ONLY Roller Shutter With Adjustable Slats. More Than Just A Roller Shutter LLER SHUTTERS ROLLER SHUTTER LOUVER WINDOWS http://www.kssthailand.com 1 Roller Shutters With Adjustable Slats NEW to Thailand

More information

Operating instructions. Switching amplifier DN0210 DN / / 2015

Operating instructions. Switching amplifier DN0210 DN / / 2015 Operating instructions Switching amplifier DN0210 DN0220 UK 80011079 / 00 01 / 2015 Contents 1 Preliminary note...4 1.1 Symbols used...4 1.2 Warning signs used...4 2 Safety instructions...5 2.1 General...5

More information

RLS - 51 Geared CAM Limit Switches

RLS - 51 Geared CAM Limit Switches RLS - 5 Geared CAM Limit Switches 2 Page Title www.powerjacks.com Power Jacks is the largest and most experienced manufacturer of actuators and mechanical jacks in the UK. Our products are used in a wide

More information

An intercom completes any access control system by providing a means for the user of screening visitors before granting access, thereby significantly

An intercom completes any access control system by providing a means for the user of screening visitors before granting access, thereby significantly INTERCOM SYSTEMS An completes any access control system by providing a means for the user of screening visitors before granting access, thereby significantly increasing security. traffic barriers POLOphone

More information

DL8. Data sheet LINAK.COM/DESKLINE

DL8. Data sheet LINAK.COM/DESKLINE DL8 Data sheet LINAK.COM/DESKLINE DL8 The DL8 is a 2-part DESKLINE column with round profiles. The upside down construction gives a very compact and clean design, which also arises from the fact that the

More information

KNX/EIB KNX Blind actuator. 1 Safety instructions. 2 Device components. Blind actuator 4-gang 24 V DC Order-No. :

KNX/EIB KNX Blind actuator. 1 Safety instructions. 2 Device components. Blind actuator 4-gang 24 V DC Order-No. : Blind actuator 4-gang 24 V DC Order-No. : 2154 00 Blind actuator 4-gang 230 V AC Order-No. : 2160 00 Blind actuator 2-gang 230 V AC Order-No. : 2152 00 Blind actuator 4-gang 230 V AC Order-No. : 1039 00

More information

Gladiator Lift Services Ltd OPTIO MRL Controller Specification

Gladiator Lift Services Ltd OPTIO MRL Controller Specification Gladiator Lift Services Ltd OPTIO MRL Controller Specification 1 Control System Specification General Requirements Control Cabinet A new MRL control panel shall be provided being of the enclosed steel

More information

Electric Actuators Type 5824 (without fail-safe action) Type 5825 (with fail-safe action)

Electric Actuators Type 5824 (without fail-safe action) Type 5825 (with fail-safe action) Electric Actuators Type 5824 (without fail-safe action) Type 5825 (with fail-safe action) Application Electric actuators designed for valves used in heating, ventilation and air-conditioning systems as

More information

DIS-2 series Decentralised servo drive

DIS-2 series Decentralised servo drive DIS-2 series Decentralised servo drive Connection types Software tools Universal in applications Rugged in use Flexible in the connection of motors and fieldbuses has developed, produced, and distributed

More information

Incremental Encoder with Hollow Shaft

Incremental Encoder with Hollow Shaft Incremental Encoder Type RI 36-H n miniature industry encoder for high number of pulses n short mounting length n easy mounting procedure n Application e.g.: - Motors - Machine tools - Packaging Machines

More information

600 Series Databook. HOME MOTION by

600 Series Databook. HOME MOTION by 600 Series Databook HOME MOTION by Somfy is the leading global manufacturer of strong, intelligent, quiet motors and electronic controls for interior and exterior window coverings with more than 110 million

More information

Building Automation KNX. Conservatory Automation

Building Automation KNX. Conservatory Automation Building Automation KNX Conservatory Automation New Products April 2010 Sensors The Weather Station Suntracer KNX-GPS provides the current meteorological data (brightness, wind speed, pecipitation and

More information

High-tech for the eye, progress through expertise

High-tech for the eye, progress through expertise Nautik Line 2012 NAUTIK LINE High-tech for the eye, progress through expertise MINOX a brand with a long tradition and decades of experience a manufacturer of optical and high quality fine mechanics precision

More information

Weather station AP 257/51

Weather station AP 257/51 Gamma instabus Weather station GPS AP 257/61 Weather station AP 257/51 Technical product information 5WG1 257-3AB61 5WG1 257-3AB51 Weather station with sensors to survey temperature, brightness, rain and

More information

DIS-2 series Decentralised servo drive

DIS-2 series Decentralised servo drive DIS-2 series Decentralised servo drive Connection types Software tools Universal in applications Rugged in use Flexible in the connection of motors and fieldbuses has developed, produced, and distributed

More information

Nice USA Era Range Catalog 2017

Nice USA Era Range Catalog 2017 Nice USA Era Range Catalog 2017 The new range of automation systems for awnings, blinds, rolling shutters and projection screens. Nice Group USA. San Antonio,Texas 78247 Ph. 877-786-7133 Visit www.niceforyou.us

More information

Automatio made easy

Automatio made easy Life made easy Automatio made easy n Comunello s Mowin project is based on our long experience with mechanical movement systems for windows and gates, developed since the company was founded in 1965. With

More information

Description: Detailed procedure on removing old bushing and installing new Brake Bushing Replacement Kit 10447

Description: Detailed procedure on removing old bushing and installing new Brake Bushing Replacement Kit 10447 Procedure: BRAKE BUSHING REPLACEMENT PROCEDURE Product: Document #: Rev: Page: MODEL 7000, 7000A, & 8000 GYRO 078 1 1 of 14 Description: Detailed procedure on removing old bushing and installing new Brake

More information

Desklift DL10. Data sheet LINAK.COM/DESKLINE

Desklift DL10. Data sheet LINAK.COM/DESKLINE Desklift DL1 Data sheet LINAK.COM/DESKLINE DL1 The DESKLIFT DL1 is a round 2-part column perfect for a wide range of different desk applications. The column is very compact and clean in design, which also

More information

Product documentation. KNX Blind- a.heating-act.fm w.3 Inputs Art.-No. MEG

Product documentation. KNX Blind- a.heating-act.fm w.3 Inputs Art.-No. MEG Product documentation KNX Blind- a.heating-act.fm w.3 Inputs Issue: 22.12.2010 KNX Product documentation Contents 1 Product definition... 3 1.1 Product catalogue... 3 1.2 Function... 3 2 Installation,

More information

AUTOMATE C 1.2 MTACRFDR-50KG - ARC DRAPERY MOTOR

AUTOMATE C 1.2 MTACRFDR-50KG - ARC DRAPERY MOTOR AUTOMATE C 1.2 MTACRFDR-50KG - ARC DRAPERY MOTOR 433 MHZ BI-DIRECTIONAL ELECTRONIC LIMIT FAVORITE POSITION LEVEL CONTROL SOFT TOUCH QUIET OPERATION AUTOMATE ARC drapery motor is compatible with popular

More information

8200 vector frequency inverter

8200 vector frequency inverter 8200 vector frequency inverter 0.25... 90.0 kw Lenze Global Drive Created as a system 8200 vector created as a system A universal product range offering all you need for user-friendly operation, diagnostics

More information

Programmed performance

Programmed performance Variable speed drives Altivar 58 Programmed performance For asynchronous motors from 0.37 to 55 kw Altivar 58 exceptional adaptability... Due to its open access to all industrial communication networks

More information

Products no longer available

Products no longer available echnical data sheet NVF4-MF(-E)-R Modulating linear actuator with emergency function for -way and 3-way globe valves Actuating force 800 N Nominal voltage AC/DC 4 V Modulating control DC 0... 10 V Position

More information

Control Panel for Swing Gates. Model: CP-12 / January 2007

Control Panel for Swing Gates. Model: CP-12 / January 2007 Control Panel for Swing Gates Model: CP-12 / January 2007 INDEX Page 1- INTRODUCTION 3 1.1 1.2 Electrical and mechanical specification General Features 2- INSTALLATION AND SETUP 2.1.1 Installation of actuator

More information

Blu2Light Light Management Installation in Luminaires

Blu2Light Light Management Installation in Luminaires BLUETOOTH WIRELESS TECHNOLOGY DEVICES FOR INSTALLATION IN LUMINAIRES BLUETOOTH WIRELESS TECHNOLOGY DEVICES FOR INSTALLATION IN LUMINAIRES Blu2Light The intelligent wireless lighting control solution Blu2Light

More information

Vario roller blinds. Creating atmosphere with light and shadow

Vario roller blinds. Creating atmosphere with light and shadow Vario roller blinds Creating atmosphere with light and shadow Vario roller blinds variations of light and shadow Perfectly regulating how the light is shed No matter whether you are blinded by the sun

More information

The new MiniCODER Absolute multi-talent for hollow shaft drives

The new MiniCODER Absolute multi-talent for hollow shaft drives ABSOLUTE New LENORD +BAUER... automates motion. The new MiniCODER Absolute multi-talent for hollow shaft drives Innovative, absolute measuring MiniCODER Absolute position acquisition with magnetic measuring

More information

Intelligent Positioning Drive GEL 6111 CANopen, PROFIBUS DP, Ethernet etc.

Intelligent Positioning Drive GEL 6111 CANopen, PROFIBUS DP, Ethernet etc. Intelligent Positioning Drive GEL 6111 CANopen, PROFIBUS DP, Ethernet etc. Technical Information Version 11.10 Features Nominal torque 5 Nm Self-locking system for wear-free holding torque On-board controls

More information

General catalogue Export SMOUTS ARCHITECTEN

General catalogue Export SMOUTS ARCHITECTEN General catalogue 2011-2012 Export SMOUTS ARCHITECTEN 01 NIKO HOME CONTROL INTERIEUR DEWAIDE Project management Configuratie Installatie Help Niko Home Control (available from 1 August 2011) Live it, love

More information

Mentor Range. Our flagship charging trolley range

Mentor Range. Our flagship charging trolley range Mentor Range Our flagship charging trolley range 2 Introduction The Mentor trolley range offers the ultimate in safe storage, charging and updating of laptops, Chromebooks, tablets and similar devices.

More information

New XUY roller sensors

New XUY roller sensors Do you want to simplify the sensor integration in your conveyor systems? New XUY roller sensors for packet, boxes, letters on roller conveyors. Telemecanique Sensor s OsiSense TM XUY photoelectric sensors

More information

Sockets & Accessories

Sockets & Accessories Sockets & Accessories Sidchrome socket sets give you the choice of socket you need to get the job done. Our sets have been designed with flexibility, quality and portability in mind. You can easily carry

More information

Premium INSTALLATION AND USER GUIDE ENGLISH TAHOMA BOX. - INSTALLATION AND USER GUIDE. Rev A _01-16

Premium INSTALLATION AND USER GUIDE ENGLISH TAHOMA BOX.  - INSTALLATION AND USER GUIDE. Rev A _01-16 Premium INSTALLATION AND USER GUIDE ENGLISH - INSTALLATION AND USER GUIDE TAHOMA BOX Rev A _01-16 www.somfy.com TaHoma, connected homes the Somfy way! Remotely control and manage the devices in your home

More information

The brightest thinking in garage door openers.

The brightest thinking in garage door openers. Amarr 860 and 840 Smart Wi-Fi Garage Door Openers The brightest thinking in garage door openers. www.amarr.com Control is everywhere. Amarr garage door openers do more than work bright; they work smart.

More information

CLIPLINE complete. The modular terminal block system for all applications

CLIPLINE complete. The modular terminal block system for all applications CLIPLINE complete The modular terminal block system for all applications CLIPLINE complete All connection technologies, one system With CLIPLINE complete, the unique modular terminal block system from

More information

Operating instructions. Speed monitor D / / 2014

Operating instructions. Speed monitor D / / 2014 Operating instructions Speed monitor D200 80005257 / 00 05 / 2014 Contents 1 Preliminary note...4 1.1 Symbols used...4 1.2 Warning signs used...4 2 Safety instructions...5 2.1 General...5 2.2 Target group...5

More information