EVO3 Pro/Pista User manual

Transcription

1 EVO Pro/Pista User manual

2 EVO Pro/Pista Release.0 Dear Customer, EVO Pro/Pista belongs to the last generation of AIM data loggers for car/bike installations: a powerful, compact, reliable and expandable system. EVO is available in two versions: Pista and Pro, with different memory dimensions, different number of channels and different hardware. EVO Pro/Pista monitors RPM, speed, engaged gear number, lap (split) times and custom sensors. Moreover, thanks to the bi-axial integrated accelerometer it is possible to create track maps. All EVO kits come with infra receiver and transmitter. Expandable thanks to ECT AIM Easy Connection Technology EVO Pro/Pista connects via CAN bus to the wide range of (optional) external expansion modules in a click. Compatible expansions are: GPS Module: to compare data and position on the track with GPS technology precision. LCU-ONE Lambda Controller: the best solution to keep under control the engine stoichiometric ratio. USB MemoryKey: a simple and quick way to backup data. Sampled data can also be visualized connecting EVO Pro/Pista to one of AIM high technology displays (TG Dash, MyChron Dash, Volante Formula), keeping all under control in a glance. Last but not least, EVO Pro/Pista includes the powerful AIM Race Studio software, to control and configure the system so to download and analyze their data through the USB port.

3 EVO Pro/Pista Release.0 INDEX Chapter EVO: versions, kits and part number.... Available versions..... EVO Pro..... EVO Pista.... Kits and part number.... EVO Pro/Pista expansions... Chapter EVO Pro/Pista: the channels The speed channel EVO Pro speed channels EVO Pista speed channel The RPM channel Sampling RPM via the CAN bus/rs Sampling the RPM from the ECU through a square wave signal (EVO Pro) Sampling the RPM from the coil: RPM low voltage input Sampling the RPM from the spark plug The lap channel How to install and power the infra receiver..... How to install and power the lap transmitter ECU connection..... How to connect EVO Pro to the ECU..... How to connect EVO Pista to the ECU... Chapter How to install and power EVO Pro/Pista.... EVO Pro/Pista front led... Chapter EVO Pro/Pista memory... Chapter EVO software, driver, configuration, transmission, data download, online and maintenance... Appendix A Loggers pinout... Appendix B EVO Pro wiring... 8 Appendix C EVO Pista wiring... Appendix D EVO Pro connection schemes... 8 Appendix E EVO Pista connection schemes

4 EVO Pro/Pista Release.0 0Chapter EVO: versions, kits and part number EVO is available in two versions: Pista and Pro, with different kits and part numbers. Thanks to the wide range of optional it fits any need. 0. Available versions EVO versions Pro and Pista have different characteristics. 8.. EVO Pro EVO Pro has this characteristics: Internal Memory: Mb Analog channels: Speed digital inputs: Connectors: Deutsch Professional Autosport.. EVO Pista EVO Pista has this characteristics: Internal Memory: 8Mb Analog channels: 8 Speed digital input: Connectors: AMP + ( pin female for connection with the external expansions and pin female for infra receiver connection)

5 EVO Pro/Pista Release.0. Kits and part number EVO Pro standard kit (part number X0EVOPRO) includes: EVO Pro (); speed sensor () to be chosen among: o car with m extension cable o bike (in the above image) o Contrinex with m extension cable temperature () sensors to be chosen among: o M water thermo resistor with 0 cm extension cable (in the above image) o Rotax thermo resistor with 0 cm extension cable o Exhaust gas Thermocouple with 0 cm compensated extension cable o Water thermocouple with 0 cm compensated extension cable 7 pins Autosport Professional female Deutsch connector () pins Autosport Professional female Deutsch connector () Infra transmitter with external power cable () Infra receiver (7) USB cable for PC connection and data download (8) Race Studio software CD and EVO Pro technical documentation () EVO Pro optional are: wiring for 7 pins Deutsch connector part number: V00A; wiring for pins Deutsch connector part number: V000; TG Dash display part number XVDAM0 MyChron Dash display part number X0VDAM0 Formula Steering wheel display part number V07VOLFORM It is also possible to buy an EVO Pro kit with Formula steering wheel included. In this case the kit part number is: X07VOLFORSGPR. Warning: there are two available versions of EVO Pro optional wiring for pins Deutsch connector; one labelled V00A and a previous one labelled V00. Their difference is in pin of the Deutsch connector that in the new version is cabled with +VB ext on the CAN connector (pin ). See technical drawings in appendix B for further information.

6 EVO Pro/Pista Release.0 EVO Pista standard kit (part number X0EVOPISTA) includes: EVO Pista (); speed sensor () to be chosen among: o car with m extension cable o bike (in the above image) o Contrinex with m extension cable temperature sensor () to be chosen among: o M water thermo resistor M with 0 cm extension cable (above image) o Rotax thermo resistor with 0 cm extension cable o exhaust gas thermocouple with 0 cm compensated extension cable o water thermocouple with 0 cm compensated extension cable standard cable () infra transmitter with external power () and infra receiver () USB cable for PC connection and data download (7) Race Studio software CD and EVO Pista technical documentation (8) EVO Pista optional are: TG Dash display part number XVDAM0 MyChron Dash display part number X0VDAM0 Formula Steering wheel display part number V07VOLFORM It is also possible to buy an EVO Pista kit with Formula steering wheel included. In this case the kit part number is: X07VOLFORSGPI.. EVO Pro/Pista expansions Channel expansion: Data Hub with 0 cm cable: Data Hub with 0 cm cable: LCU-ONE CAN: LCU-ONE CAN+Analog: GPS0 Module with 0 cm cable: GPS0 Module with 00 cm cable: TC Hub (CAN): X08CHEXUC X08HUB00 X08HUB0 X08LCU0K0 X08LCUKAOCRS X0GPSB0 X0GPSB00 X08UTCCTC Warning: when connecting EVOPro/Pista to any external expansion modules ensure that both devices are OFF.

7 EVO Pro/Pista Release.0 Chapter EVO Pro/Pista: the channels EVO Pro/Pista have different analog and digital channels. Some of them are already configu while others are freely configurable according on the sensor that is connected them. See Race Studio Configuration user manual that can be freely downloaded from download area, software section of website for information on configurable channels settings.. The speed channel EVO Pro/Pista have respectively and speed channels. 0.. EVO Pro speed channels To sample the speed corresponding to EVO Pro speed channels connect: the speed sensor to cable labelled Speed and ending with a pins 7 female connector of EVO Pro 7 pins Deutsch connector; the speed sensor to cable labelled Speed and ending with a pins 7 female connector of EVO Pro 7 pins Deutsch connector; the speed sensor to cable labelled Speed and ending with a pins 7 female connector of EVO Pro pins Deutsch connector; the speed sensor to cable labelled Speed and ending with a pins 7 female connector of EVO Pro pins Deutsch connector; AIM standard wiring for 7 and pins Deutsch connector are already labelled. Refer to the appendixes technical drawings for further information concerning EVO Pro wirings... EVO Pista speed channel To sample EVO Pista speed channel connect the speed sensor to the cable labelled Speed and ending with pins 7 female connector of EVO Pista standard wiring; AIM standard wiring is already labelled. Refer to the appendixes technical drawings for further information concerning EVO Pista wiring.. The RPM channel RPM signal can be sampled in a lot of different ways: from the ECU via CAN bus or RS; from the ECU through a square wave signal (from 8 to 0V); from the coil: RPM low voltage input (from 0 to 00V); from the spark plug: converting RPM signal sampled from the spark plug in a square wave signal... Sampling RPM via the CAN bus/rs To sample the RPM signal via CAN bus or RS, refer to paragraph.... Sampling the RPM from the ECU through a square wave signal (EVO Pro) To sample the RPM from the ECU through a square wave signal (from 8 to 0V) connect pin of 7 pins Deutsch connector ( cable) to ECU RPM output (if present).this sampling way is only available on EVO Pro. 7

8 EVO Pro/Pista Release Sampling the RPM from the coil: RPM low voltage input To sample RPM signal from the coil on a low voltage RPM input (from 0 to 00V) connect pin of 7 pins Deutsch connector ( cable) to the ECU coil input... Sampling the RPM from the spark plug To sample the RPM from the spark plug an AIM ARP-0 adaptor is needed (part number X0ADRPM000) to be installed as shown here below. Installation steps are: connect RPM clip to the spark plug; connect the cable labelled to pin of the logger; connect the cable labelled +V to the positive pole (+) of the vehicle battery: battery voltage has to be V; connect the blu cable labelled RPM to EVO Pro/Pista RPM (8-V) input. The image here below shows a drawing of RPM adapter top view.. The lap channel To sample the lap time connect the infra receiver included in the kit: to cable labelled Lap ending with a pins 7 female connector of 7 pins Deutsch connector wiring of EVO Pro; to pins 7 female connector placed right on the front of EVO Pista and highlighted in the image here below. 8

9 EVO Pro/Pista Release How to install and power the infra receiver The infra receiver has to see the transmitter placed on the side of the circuit. Install it with the eye pointed to the transmitter. In the image here below the receiver eye is highlighted. Be sure that the receiver has a straight line with the transmitter on the correct side of the vehicle as shown here below. The transmitter is powe by the logger.

10 EVO Pro/Pista Release.0.. How to install and power the lap transmitter AIM produces an infra lap transmitter shown here below. The transmitter can be internally or externally powe: internally: with 8 AA batteries (placed in the transmitter case); when the batteries are flat Power led starts blinking each second ( Hz); externally: with a V power cable; when the battery is flat Power led starts blinking each second. The transmitter has two working ways: Low power mode: for tracks less than 0m (0ft) wide; High Power mode: for tracks more than 0m (0ft) wide; in this second case external V power is needed and both led switches on when the transmitter is powe on. To activate High/Low power mode it is necessary to open the transmitter as shown here below on the left. The images here below on the right shows the possible working options. When bought the transmitter is set on low power mode: images top on the right. To set high power mode insert both clips in the jumper as shown in the image bottom on the right. WARNING: verify the number of transmitters installed on the circuit before installing one s own. It is in fact possible that there are other transmitter additional to the one placed on the start/finish line. The simplest way to record correct lap times is using one only transmitter for all drivers. Use Obscuring time function (set through via software configuration) to ensure that EVO Pro/Pista reads only the wished transmitter(s). Refer to Race Studio Configuration user manual for further information concerning the system configuration. 0

11 EVO Pro/Pista Release.0 7. ECU connection EVO Pro/Pista can sample data out coming from the vehicle ECU using the CAN/RS cable, that comes with the kit. To know if the vehicle ECU is or not supported by AIM loggers and for further and updated information concerning AIM loggers refer to download area, ECU connection section of Always refer to the ECU user manual to know its pinout and cable connections... How to connect EVO Pro to the ECU The connection is made through the pins Deutsch connector. Using the CAN bus connect: cable labelled CAN + to pin 0 of pins Deutsch connector; cable labelled CAN - to pin of pins Deutsch connector. Using RS line connect: RSRX pin 7 cable RSTX pin 8 cable.. How to connect EVO Pista to the ECU The connection is made through pins AMP connector. Using the CAN bus connect: cable labelled CAN + to pin of pins AMP connector; cable labelled CAN - to pin of pins AMP connector. Using RS line connect: cable labelled RSRX to pin of pins AMP connector; cable labelled RSTX to pin of pins AMP connector.

12 EVO Pro/Pista Release.0 Chapter How to install and power EVO Pro/Pista To install EVO Pro/Pista on the vehicle: choose a position where the logger is not in contact with oil or fuel; ensure that the system is not installed too near to heat sources; install system and wirings far from sources of electromagnetic interference like spark plugs or coil. EVO Pro/Pista has one internal bi-axial accelerometer: to correctly sample in-line (parallel to the vehicle speed) and lateral (perpendicular to the vehicle speed) acceleration install the logger as shown in example of the below image. To install the logger differently change Acc_ and Acc_ settings as explained in examples and. In case of bike application it is possible to install an external gyroscope, optional to EVO Pro/Pista, to create track maps. This sensor can be installed only on these channels that supply the V power force it needs; to say: on channels CH_8, CH_, CH_0 e CH_ of EVO Pro; on channels CH_, CH_, CH_, CH_7 e CH_8 of EVO Pista.

13 EVO Pro/Pista Release.0 To power EVO Pro/Pista: check power voltage: EVO Pro/Pista needs an external /8 VDC power source (the vehicle battery): do not exceed these limits; connect cable labelled to the vehicle battery negative (-) pole and cable labelled /8 VDC to the vehicle battery positive (+) pole; power EVO Pro/Pista through the vehicle master switch to save the vehicle battery charge;. EVO Pro/Pista front led EVO Pro/Pista has a little green led on the front panel. As shown in the above image the led position is top left on EVO Pista and bottom central on EVO Pro. The led has a double function: it switches on when EVO is powe and shows the logger status: Led blinking Hz ( time/second) Led steady (not blinking) Led blinking Hz ( times/second) EVO waiting to record EVO sampling Status EVO non ok

14 EVO Pro/Pista Release.0 Chapter EVO Pro/Pista memory All EVO Pro/Pista models have an internal memory whose characteristics are: non volatile Flash type: data are sto also when the logger is off or disconnected; round: when it fills up older data are over written; different dimensions according to the system version: o EVO Pista: 8 MB; o EVO Pro: MB.

15 EVO Pro/Pista Release.0 Chapter EVO software, driver, configuration, transmission, data download, online and maintenance EVO Pro/Pista connects easily to a PC with an USB cable and can be configu only using Race Studio, the powerful software supplied free developed by AIM to configure its loggers and analyse sto data. EVO Pro/Pista standard kit includes an USB cable and Race Studio and USB driver installation CD. WARNING: it is possible to configure the logger only after having installed software and driver. Periodically check for new Race Studio software and/or EVO Pro/Pista firmware releases. Race Studio Configuration user manual, that can be downloaded from download area, software section of AIM corporate website contains all information about how to: install Race Studio under Microsoft Windows Xp, Microsoft Windows Vista (both and bit only) and Microsoft Windows 7 ; configure EVO Pro/Pista and set its channel; set and manage standard and custom sensors; calibrate and auto-calibrate sensors; transmitting the configuration to EVO Pro/Pista once set; calculate the engaged gear; download sampled data; enter online mode. EVO Pro/Pista does not need any special maintenance. The only suggested maintenance is a periodical software / firmware update when released by AIM (periodically check To update software/firmware connect to download area, software/firmware area and select in sequence firmware and software options. Check if software and/or firmware updates have been released, download them, run them and follow the instructions that appears on the PC monitor.

16 EVO Pro/Pista Release.0 Appendix A Loggers pinout N.rev. / Rev. N. Descrizione / Description Data / date Firma / Sign Contr. da / Ckd. by EVO Pro pinout 7 Pins Deutsch Conn. Pins Deutsch Conn Segnalazione Status logger PIN CONNECTION +Vb ext +Analog Input +Analog Input Analog Analog V reference V reference +Analog Input +Analog Input +Analog Input Analog RPM -8 V Rpm in +Vb +Vb +Vb +Analog Input +Analog Input V reference V reference +Analog Input 0 V reference +Analog Input +Analog Input 8 Analog +Vb Speed Analog +Analog Input +Analog Input 7 V reference Analog Speed Lap in PIN CONNECTION +Vb CAN 0- CAN 0+ Speed Speed D+ D- +Vb +Vb CAN Ext. Gear Flash Ext. Input Ext. Input RX TX CAN + CAN - Vb Ext. Logger state signalling Led Status Blinking Hz On (not blinking) Blinking Hz Logger Status Waiting to record Recording Logger status non ok LI Pinout EVO Pro Rev. / Rev. Foglio / Sheet of

17 EVO Pro/Pista Release.0 N.rev. / Rev. N. Descrizione / Description Data / date Firma / Sign Contr. da / Ckd. by EVO Pista pinout Logger Status Signalling pins AMP pins AMP pins 7 pins 7 "B" connector "A" connector "B" "A" pins 7 connector pins AMP "A" connector pins 7 connector PIN CONNECTION PIN CONNECTION PIN CONNECTION CAN 0+ +V battery CAN 0- - V external battery Segnalazione stato logger Led status Logger status Blinking Hz Waiting to record Steady Recording Blinking Hz Logger status non ok V External battery CAN - (ECU interface) CAN + (ECU interface) RSTx (ECU interface) RS Rx (ECU interface) USB D- RPM 0-00 V coil & square wave (>8V) +V battery +V battery Speed Magnetic Lap +V battery Optic Lap pins AMP "B" connector PIN CONNECTION Analog channel V reference Analog Analog channel Analog channel V reference 7 Analog 8 Analog channel Analog channel 8 0 USB D+ Analog Analog channel 7 Analog channel V reference Analog Analog channel LI Pinout EVO Pista Rev. / Rev. Foglio / Sheet of 7

18 EVO Pro/Pista Release.0 Appendix B EVO Pro wiring N.rev. / Rev. N. Descrizione / Description Data / date Firma / Sign Contr. da / Ckd. by EVO Pro - pins Deutsch connector harness A N. - *0. mm² cables Heat Shrink Ringale cover Heat Shrink pins Deutsch male connector N. - *0. mm² cable A N. 0 - *0. mm² cables SEZ A-A pins 7 female connector pinout Solder termination view pins 7 female connector pinout Solder termination view pins Deutsch male connector pinout Contact insertion view N. - pins 7 female connector pins 7 female connector LI Cavo EVO Pro - Connettore Deutsch pin 0../A Rev. / Rev. Foglio / Sheet of 8

19 EVO Pro/Pista Release.0 N.rev. / Rev. N. Descrizione / Description Data / date Firma / Sign Contr. da / Ckd. by Table - Channels cabled with connectors pins Deutsch connector pin Cable colour Destination connector Destination connector pin Cable type Lenght Channel Label 7 8 n.c. USB x0. mm² 00 mm USB D+ USB D- USB 0 n.c. Speed x0. mm² 00 mm Speed V battery Speed 0 n.c. Speed x0. mm² 00 mm Speed V battery Speed orange Exp. x0. mm² 0 mm CAN 0+ V battery CAN 0- +Vb ext. Exp. gear flash x0. mm² 0 mm Gear flash gear flash V battery Gear flash pins Deutsch connector pin Table - Chanels cabled without connector Cable colour Not cabled channel Cable type Lenght Channel Digit input x0. mm² x0. mm² 0 mm IN yellow Digit input x0. mm² x0. mm² 0 mm IN CAN RS x0. mm² x0. mm² x0.mm² x0. mm² x0. mm² x0. mm² 0 mm 0 mm CAN + CAN - RS RX RS TX LI EVO Pro cavo connettore Deutsch pin 0.. Rev. / Rev. Foglio / Sheet of

20 EVO Pro/Pista Release.0 N.rev. / Rev. N. Descrizione / Description Data / date Firma / Sign Contr. da / Ckd. by 7 pins Deutsch male connector EVO Pro - 7 pins Deutsch connector harness A Heat Shrink Ringale cover Heat shrink N. - *0. mm² cable N - pins 7 female connectors A N. - *0. mm² cables SEZ A-A pins Deutsch connector pinout contact insertion view pins 7 female connector pinout solder termination view LI Cavo EVO Pro - Connettore Deutsch 7 pin 0..0 Rev. / Rev. Foglio / Sheet of 0

21 EVO Pro/Pista Release.0 N.rev. / Rev. N. Descrizione / Description Data / date Firma / Sign Contr. da / Ckd. by Table - channels cabled with connectors 7 pins Deutsch connector pin Cable colour Destination connector Channel Channel Channel Channel Channel Channel Channel 7 Channel 8 Channel Channel 0 Channel Channel Optic Lap Speed Speed Destination Connector pin Cable type x0. mm² x0. mm² x0. mm² x0. mm² x0. mm² x0. mm² x0. mm² x0. mm² x0. mm² x0. mm² x0. mm² x0. mm² x0. mm² x0. mm² x0. mm² Lenght 0 mm 0 mm 0 mm 0 mm 80 mm 80 mm 00 mm 00 mm 0 mm 0 mm 0 mm 0 mm 0 mm 0 mm 0 mm Channel Analog Input V Reference Analog Input V Reference Analog Input V Reference Analog Input V Reference Analog Input V Reference Analog Input V Reference Analog Input 7 V Reference Analog Input 8 V Battery V Reference Analog Input V Battery V Reference Analog Input 0 V Battery V Reference Analog Input V Battery V Reference Analog Input V Battery V Reference Lap V Battery Lap Speed V Battery Speed V Battery LI Cavo EVO Pro - connettore Deutsch 7 pin 0..0 Rev. / Rev. Foglio / Sheet of

22 EVO Pro/Pista Release.0 N.rev. / Rev. N. Descrizione / Description Data / date Firma / Sign Contr. da / Ckd. by Table of channels cabled without connector 7 pin Deutsch connector 8 Cable colour Not cabled channel RPM Cable Type x0. mm² x0. mm² x0. mm² Lenght 0 mm Channel RPM input RPM +8V Power x0. mm² x0. mm² 0 mm -V power input LI Cavo EVO Pro - connettore Deutsch 7 pin Rev. / Rev. Foglio / Sheet 0..0 of

23 EVO Pro/Pista Release.0 N.rev. / Rev. N. Descrizione / Description Data / date Firma / Sign Contr. da / Ckd. by EVO Pro - pins Deutsch connector harness A N. - *0. mm² cables Heat Shrink Ringale cover Heat Shrink pins Deutsch male connector N. - *0. mm² cable A N. 0 - *0. mm² cables SEZ A-A pins 7 female connector pinout Solder termination view pins 7 female connector pinout Solder termination view pins Deutsch male connector pinout Contact insertion view N. - pins 7 female connector pins 7 female connector LI Cavo EVO Pro - Connettore Deutsch pin 0.. Rev. / Rev. Foglio / Sheet of

24 EVO Pro/Pista Release.0 N.rev. / Rev. N. Descrizione / Description Data / date Firma / Sign Contr. da / Ckd. by Table - Channels cabled with connectors pins Deutsch connector pin 7 8 n.c. 0 n.c. 0 n.c. Cable colour Destination connector USB Speed Speed Exp. gear flash Destination connector pin Cable type x0. mm² x0. mm² x0. mm² x0. mm² x0. mm² Lenght Channel Label 00 mm 00 mm 00 mm 0 mm 0 mm USB D+ USB D- Speed V battery Speed V battery CAN 0+ V battery CAN 0- Gear flash gear flash V battery USB Speed Speed Exp. Gear flash pins Deutsch connector pin Table - Chanels cabled without connector Cable colour Not cabled channel Cable type Lenght Channel Digit input x0. mm² x0. mm² 0 mm IN yellow Digit input x0. mm² x0. mm² 0 mm IN 0 CAN x0. mm² x0. mm² x0.mm² 0 mm CAN + CAN RS x0. mm² x0. mm² x0. mm² 0 mm RS RX RS TX LI EVO Pro cavo connettore Deutsch pin 0.. Rev. / Rev. Foglio / Sheet of

25 EVO Pro/Pista Release.0 7Appendix C EVO Pista wiring N.rev. / Rev. N. Descrizione / Description Data / date Firma / Sign Contr. da / Ckd. by EVO Pista harness "B" - pins AMP female connector Heat shrink Ringale cover Heat shrink "A" - pins AMP female connector "A" "B" "A" - pins AMP female connector pinout contact insertion view "B" - pins AMP female connector pinout contact insertion view N. - *0. mm² cable N. - pins 7 female connector N.7 - *0. mm² cable N. - *0. mm² cable N. - pins 7 female connector pins 7 female connector pinout solder termination view pins 7 female connector pinout solder termination view LI Cavo EVO Pista Rev. / Rev. Foglio / Sheet of

26 EVO Pro/Pista Release.0 N.rev. / Rev. N. Descrizione / Description Data / date Firma / Sign Contr. da / Ckd. by Table - 7 female connector Label pin Cable type Cable colour AMP pin AMP pin Connection Lenght Ch. x0. mm² 8 7 Analog input Analog V reference 0 mm Ch. x0. mm² 7 Analog input Analog V reference 0 mm Ch. x0. mm² Analog input Analog V reference 0 mm Ch. x0. mm² Analog input Analog +V battery V reference 00 mm Ch. x0. mm² Analog input Analog +V battery V reference 00 mm Ch. x0. mm² Analog input Analog +V battery V reference 00 mm Ch. 7 x0. mm² Analog input 7 Analog + V battery V reference 0 mm Ch. 8 x0. mm² Analog input 8 Analog +V battery V reference 0 mm Speed x0. mm² 0 Speed +V battery 0 mm Table - 7 female connector Etichetta Pin Tipo cavo Colore cavo Pin AMP Pin AMP Connessione Lunghezza USB x0. mm² bianco nero rosso blu USB D+ USB D- 000 mm LI Cavo Evo Pista Rev. / Rev. Foglio / Sheet of

27 EVO Pro/Pista Release.0 N.rev. / Rev. N. Descrizione / Description Data / date Firma / Sign Contr. da / Ckd. by Table - Not cabled channels Channel Cable type Cable colour AMP pin AMP pin Connection Lenght Power x0. mm² x0. mm² - VDC 00 mm RPM x0. mm² 8 RPM coil-square wave 00 mm CAN x0. mm² x0. mm² blue CAN+ CAN- 00 mm RS x0. mm² x0. mm² blue RSRX RSTX 00 mm LI Cavo EVO Pista - 7 Rev. / Rev. Foglio / Sheet 0.. of 7

28 EVO Pro/Pista Release.0 8Appendix D EVO Pro connection schemes N.rev. / Rev. N. Descrizione / Description Data / date Firma / Sign Contr. da / Ckd. by Connection scheme EVO Pro + Formula Steering wheel TF TF TF TF TF...TF Function buttons Formula Steering wheel Car panel-steering wheel connection cable Draw code 0..0 EVO Pro - Formula Steering wheel connection cable Draw code 0.. Exp. Car panel-logger Connection cable Draw code 0..0 Exp. L.I. EVO Pro + Formula Steering wheel - versione senza giunto cablato Rev. / Rev. Foglio / Sheet of 8

29 EVO Pro/Pista Release.0 N.rev. / Rev. N. Descrizione / Description Data / date Firma / Sign Contr. da / Ckd. by Example of network connection scheme with EVO Pro, Formula Steering wheel, GPS Module and LCU-ONE TF TF Free function buttons TF... TF TF TF Car panel - logger harness - Draw code 0..0 Formula steering wheel Formula Steering wheel- car panel harness Draw code 0..0 EVO Pro connection harness Draw code 0.. Exp. GPS Module Data Hub Lambda probe LCU-ONE EVO Pro Exp. L.I Esempio schema di collegamento: EVO Pro, Formula Steering Wheel, Modulo GPS, LCU-ONE Rev. / Rev. Foglio / Sheet of

30 EVO Pro/Pista Release.0 Appendix E EVO Pista connection schemes N.rev. / Rev. N. Descrizione / Description Data / date Firma / Sign Contr. da / Ckd. by Connection scheme of EVO Pista + Formula Steering wheel TF TF Free function buttons TF...TF TF TF Car panel-loggers connection cable Draw code 0..0 Formula Steering wheel Steering wheel-car panel conection cable Draw code 0..0 Exp. EVO Pista LI Volante Formula + EVO Pista - versione senza giunto cablato Rev. / Rev. Foglio / Sheet of 0

31 EVO Pro/Pista Release.0 N.rev. / Rev. N. Descrizione / Description Data / date Firma / Sign Contr. da / Ckd. by Example of network connection scheme with EVO Pista, Formula Steering wheel, GPS Module and LCU-ONE TF TF TF TF Free function buttons TF...TF Car panel-logger harness Draw code 0..0 Formula steering wheel Formula steering wheel car-panel harness Draw Code 0..0 Exp GPS Module Data Hub EVO Pista Lambda probe LCU-ONE LI Esempio schema di collegamento : EVO Pro, Volante formula, Modulo GPS, LCU-ONE Rev. / Rev. Foglio / Sheet of