1Certified LR R Inner-housing lock. Outer-housing lock

Size: px

Start display at page:

Download "1Certified LR R Inner-housing lock. Outer-housing lock"

Elfrieda Sims
6 years ago
Views:

.mm pitch/disconnectable Crimp style connectors (Combined use for both wire-to-board and wire-to-wire connections) a 0 This VL connector is designed for wire-towire and wire-to-board.

1 .mm pitch/disconnectable Crimp style connectors (Combined use for both wire-to-board and wire-to-wire connections) a 0 This VL connector is designed for wire-towire and wire-to-board. mm pitch connector corresponding to large current. Secondary retainer, which prevents from insufficient insertion of contact and coming off contact, may use and large current circuit can be connected certainly and safety. Housing lances for contact retention Secondary retainer Suited for large current Two kinds of connections Specifications Current rating: 0 A AC, DC (Refer to the table below.) Voltage rating: 00 V AC, DC Temperature range: - C to +90 C (including temperature rise in applying electrical current) Contact resistance: Initial value/ mω max. After environmental tests/ 0 mω max. Insulation resistance:,000 MΩ min. Withstanding voltage:,000 VAC/minute Applicable wire: AWG # to # Applicable PC board thickness:. mm * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. * Compliant with RoHS. Note: The current rating differs depending on the number of circuits and the wire size used in each connector. The table below lists the current rating as a function of the number of circuits and the wire size. Current unit: A Note: Do not branch in parallel current which exceeds the rated current (e.g. more than A in the case of circuits with AWG #). If branched in parallel, current imbalance or other problems may develop. If it is absolutely necessary to branch such a large current in parallel, design the circuits without causing any imbalance and provide an extra margin for each circuit. Standards 0 Recognized E09 Certified LR0 R90 PC board layout and Assembly layout <,, (Single-row) circuits> <,,, circuits> circuits (Single-row), circuits. 0.0 Note:. The above figure is the figure viewed from soldering side.. Tolerances are non-cumulative: ±0.0 mm for all centers.. Hole dimensions differ according to the type of PC board and piercing method. The dimensions above should serve as a guideline. Contact JST for details.

2 Contact Model No. SVF-T-P.0 SVF-T-P.0 SVF-T-P.0 Applicable wire mm AWG # and Finish Insulation O.D. (mm) Q'ty/ reel Phosphor bronze, tin-plated (reflow treatment) SVF-T-P.0 SVF-T-P.0 SVF-T-P.0 Housing () < circuits> < circuits> < circuits> < circuits> < circuits> < circuits> VLP-0V VLP-0V VLP-0V VLP-0V VLP-0V VLP-V PA, UL9V-0, natural (white)

3 Housing () < circuits> < circuits> < circuits> < circuits (Single-row)> < circuits> < circuits> < circuits> (single-row) VLP-0V- VLP-0V- VLP-0V- VLP-0VN- VLP-0V- VLP-0V- VLP-V- PA, UL9V-0, natural (white)

4 Retainer <, circuits> <, circuits>,, (single-row), VLS-0V VLS-0V VLS-0V VLS-V Glass-filled PA, UL9V-0, natural (ivory) < circuits (Single-row), circuits> < circuits> Shrouded header <, circuits> <, circuits> < circuits (Single-row)> <, circuits> Circuits (single-row) Model No. B0P-VL B0P-VL B0P-VL B0P-VL-VN-. B0P-VL B0P-VL BP-VL Dimensions (mm) Q ty/ box and Finish Post: Copper-alloy, tin-plated (reflow treatment) Wafer: PA, UL9V-0, natural (white)

5 Contact position location numbers < circuits> < circuits> < circuits> < circuits> < circuits> < circuits> 0 9 < circuits> < circuits> < circuits> < circuits (Single-row)> < circuits> < circuits> < circuits> 0 9

6.2mm pitch/disconnectable Crimp style connectors. 1Certified LR R <Inner-housing lock>

6.2mm pitch/disconnectable Crimp style connectors. 1Certified LR R <Inner-housing lock> 6.mm pitch/disconnectable Crimp style connectors a 0 This VL connector is designed for wire-towire and wire-to-board 6.mm pitch connector corresponding to large current. Secondary retainer, which prevents