Evaluates: MAX MAX31865PMB1 Peripheral Module. General Description. Features and Benefits. Peripheral Module Board Photo
|
|
|
- Elizabeth Banks
- 6 years ago
- Views:
Transcription
1 General Description The MAX31865PMB1 peripheral module (Pmod ) provides the necessary hardware to interface the MAX31865 RTD-to-digital converter to any system that utilizes Pmodcompatible expansion ports configurable for SPI communication. The IC is an easy-to-use resistance-to-digital converter optimized for platinum resistance temperature detectors (RTDs). This module is set up to operate with a PT100 platinum RTD. For full range accuracies, other RTD types, and detailed information regarding operation of the IC, refer to the MAX31865 IC data sheet. Features and Benefits Simple Conversion of Platinum RTD Resistance to Digital Value Handles 100Ω to 1kΩ (at 0 C) Platinum RTDs (PT100 to PT1000) Compatible with 2-, 3-, and 4-Wire Sensor Connections 6-Pin Pmod-Compatible Connector (SPI) RoHS Compliant Proven PCB Layout Fully Assembled and Tested Ordering Information appears at end of data sheet. Peripheral Module Board Photo Pmod is a trademark of Digilent Inc ; Rev 0; 1/14
2 Detailed Description SPI Interface The MAX31865PMB1 Pmod can plug directly into a Pmod-compatible port (configured for SPI) through connector J1. For information on the SPI protocol, refer to the MAX31865 IC data sheet. J1 provides connection of the module to the Pmod host. The pin functions and pin assignments adhere to the Pmod standard recommended by Digilent. See Table 1 for detailed descriptions. CON1 Connector CON1 provides connection to the IC pins, as follows: Connector CON1 pin 1 connects to FORCE+ and FORCE2 (pins 5 and 6) of the IC. Connector CON1 pin 2 connects to RTDIN+ (pin 7) of the IC. Connector CON1 pin 3 connects to RTDIN- (pin 8) of the IC. Connector CON1 pin 4 connects to FORCE- (pin 9) of the IC. J2 Two jumpers at J2 are provided to select either 2-wire or 3-wire RTD configuration. For 2-wire RTD, install both jumpers, from 1-2 and 3-4. For 3-wire RTD, install jumper from 3-4 only. Power Supplies The Pmod is powered directly by the +3.3V power supply from the MAXUSB2PMB Munich board, pins 6 and 12 of connector J1. Software Graphical User Interface (GUI) The Munich GUI is provided to facilitate the evaluation of the Pmod. Visit /evkitsoftware to download the latest version of the Munich GUI software, PMOD_SPI.ZIP. Refer to the MAX318650PMB1 peripheral module and Munich (USB2PMB1) adapter board Quick Start Guide for step-by-step evaluation using the Munich GUI. Table 1. Connector J1 (SPI Communication) PIN SIGNAL DESCRIPTION 1 SS Chip Select. Assert low to enable the SPI interface. 2 MOSI MAX31865 Serial-Data Input 3 MISO MAX31865 Serial-Data Output 4 SCLK MAX31865 Serial-Clock Input 5, 11 GND Ground 6, 12 V CC +3.3V Power Supplies 7 DRDY 8 10 No Connection Active-Low Push-Pull Data-Ready Output. DRDY goes low when a new conversion result is available in the data register. When a read-operation of an RTD resistance data register occurs, DRDY returns high. Maxim Integrated 2
3 Component List DESIGNATION QTY DESCRIPTION C1 1 C2 C4 3 CON1 1 J1 1 J2 1 1µF ±10%, 25V X7R ceramic capacitor (0603) TDK C1608X7R1E105K080AB 0.1µF ±10%, 25V XR7 ceramic capacitors (0603) TDK C1608X7R1E104K080AA 4-position screw terminal, 2.54mm pitch Phoenix Contact pin connector header,.100 R/A 15AU FC HLF 4-pin header Molex DESIGNATION QTY DESCRIPTION R kΩ ±5% resistor (0603) R2 R Ω ±5% resistors (0603) R Ω ±0.1% resistor (0603) R8 0 R9 0 U1 1 1 Not installed, 400Ω ±0.1% resistor (0805) Not installed, 400Ω ±0.1% resistor (1206) RTD-to-digital converter (20 TQFN-EP*) Maxim MAX31865ATP+ 100Ω platinum-chip temperature sensor, leaded Reichelt Elektronik PCA or equivalent *EP = Exposed pad. Component Suppliers SUPPLIER PHONE WEBSITE Molex Phoenix Contact Reichelt Elektronik 49 (0) TDK Corp Note: Indicate that you are using the MAX31865PMB1 when contacting these component suppliers. Maxim Integrated 3
4 Figure 1. MAX31865PMB1 Peripheral Module Schematic Maxim Integrated 4
5 Figure 2. MAX31865PMB1 Peripheral Module Component Placement Guide Top Figure 3. MAX31865PMB1 Peripheral Module Component Placement Guide Bottom Maxim Integrated 5
6 Ordering Information PART MAX31865PMB1# #Denotes RoHS compliant. TYPE Peripheral Module Maxim Integrated 6
7 Revision History REVISION NUMBER REVISION DATE DESCRIPTION PAGES CHANGED 0 1/14 Initial release For pricing, delivery, and ordering information, please contact Maxim Direct at , or visit Maxim Integrated s website at. Maxim Integrated cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim Integrated product. No circuit patent licenses are implied. Maxim Integrated reserves the right to change the circuitry and specifications without notice at any time. Maxim Integrated and the Maxim Integrated logo are trademarks of Maxim Integrated Products, Inc Maxim Integrated Products, Inc. 7
8 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Maxim Integrated: MAX31865PMB1#
MAX31723PMB1 Peripheral Module
19-6332; Rev 0; 5/12 MAX31723PMB1 Peripheral Module General Description The MAX31723PMB1 peripheral module provides the necessary hardware to interface the MAX31723 digital thermometer and thermostat to
Evaluates: MAX MAX31856 Evaluation System. General Description. Features. EV System Contents. MAX31856 EV Kit Files. MAX31856 EV System Photo
General Description The MAX31856 evaluation system (EV system) provides the hardware and software necessary to evaluate the MAX31856 thermocouple-to-digital converter. The EV system includes the MAX31856PMB1
Evaluates: MAX MAX14914 Peripheral Module. Features. General Description. Contents MAX14914PMB
General Description The MAX494 peripheral module provides the hardware to evaluate the MAX494 high-side/push-pull driver that operates as both an industrial digital output (DO) and an industrial digital
MAX5216PMB1 Peripheral Module
9-6; Rev 0; 5/ MAX56PMB Peripheral Module General Description The MAX56PMB peripheral module provides the necessary hardware to interface the MAX56 6-bit DAC to any system that utilizes PmodK-compatible
MAX44000PMB1 Peripheral Module
19-6335; Rev 0; 5/12 MAX44000PMB1 Peripheral Module General Description The MAX44000PMB1 peripheral module provides the necessary hardware to interface the MAX44000 ambient and infrared proximity sensor
Evaluates: MAX MAX14970 Evaluation Kit. General Description. Quick Start (Application Circuit) Features. Table 1. Default Shunt Positions
General Description The MAX14970 evaluation kit (EV kit) provides a proven design to evaluate the MAX14970 dual-channel buffer. The EV kit contains four sections: an application circuit, characterization
Quick Start. General Description. Features. Required Equipment. Procedure
General Description The MAX31875 evaluation kit (EV kit) demonstrates the MAX31875 ±2 C-accurate local temperature sensor with I2C/SMBus interface. The EV kit includes a graphical user interface (GUI)
Maxim Integrated Products 1
19-4581; Rev 0; 4/09 MAX4989 Evaluation Kit General Description The MAX4989 evaluation kit (EV kit) provides a proven design to evaluate the MAX4989 Hi-Speed 2-of-4 USB 2.0 crosspoint switch. The EV kit
MAX11205PMB1 Peripheral Module
9-60; Rev 0; / MAX0PMB Peripheral Module General Description The MAX0PMB peripheral module provides the necessary hardware to interface the MAX0 6-bit ADC to any system that utilizes PmodK-compatible expansion
General Description. Features. Component List. Component Suppliers
General Description The MAX5911 evaluation kit (EV kit) is a fully assembled and tested surface-mount circuit board that demonstrates the MAX5911 fully integrated hot-swap solution for negative supply
MAX3232PMB1 Peripheral Module
19-6319; Rev 0; 5/12 MAX3232PMB1 Peripheral Module General Description The MAX3232PMB1 peripheral module provides the necessary hardware to interface the MAX3232E true RS-232 transceiver to any system
S Application Circuit with SATA Input/Output S Eye Diagram Test Circuit with SMA Inputs/ Outputs
19-4953; Rev 0; 9/09 MAX4951AE Evaluation Kit General Description The MAX4951AE evaluation kit (EV kit) provides a proven design to evaluate the MAX4951AE dual-channel buffer. The EV kit contains four
+Denotes lead-free and RoHS compliant.
19-4387; Rev 0; 11/08 MAX9675 Evaluation Kit General Description The MAX9675 evaluation kit (EV kit) provides a proven design to evaluate the MAX9675 nonblocking 16 x 16 video crosspoint switch with buffered
MAX4951C Evaluation Kit Evaluates: MAX4951C
19-5944; Rev 0; 6/11 MAX4951C Evaluation Kit General Description The MAX4951C evaluation kit (EV kit) provides a proven design to evaluate the MAX4951C dual-channel buffer. The EV kit contains four sections:
S Proven PCB Layout S Fully Assembled and Tested. Maxim Integrated Products 1
19-5059; Rev 1; 4/10 General Description The MAX4951B evaluation kit (EV kit) provides a proven design to evaluate the MAX4951BE dual-channel redriver. The EV kit contains four sections: application circuit,
MAX14535E Evaluation Kit. Evaluates: MAX14535E
19-4510; Rev 0; 3/09 General Description The MAX14535E evaluation kit (EV kit) demonstrates the MAX14535E double-pole/double-throw (DPDT) analog switch featuring negative signal capability, low onresistance
MAX17116Q Evaluation Kit Evaluates: MAX17116 in a 24-Pin TQFN Package
19-5846; Rev 0; 5/11 MAX17116Q Evaluation Kit General Description The MAX17116Q evaluation kit (EV kit) is a fully assembled and tested surface-mount PCB that evaluates the MAX17116 dual-output DC/DC power
MAX14850PMB1 Peripheral Module
9-633; Rev 0; 5/2 General Description The MAX4850PMB peripheral module utilizes the MAX4850 digital isolator to isolate another SPI- or UARTbased module from any host system that utilizes Pmod K - compatible
MAX5097A Evaluation Kit. Evaluates: MAX5097A
19-0718; Rev 0; 1/07 MAX5097A Evaluation Kit General Description The MAX5097A evaluation kit (EV kit) demonstrates the MAX5097A in a standard application circuit demonstrating high efficiency. The EV kit
MAX14579E Evaluation Kit Evaluates: MAX14579E/MAX14579AE
19-5995; Rev 0; 8/11 General Description The MAX14579E evaluation kit (EV kit) provides a proven design to evaluate the MAX14579E headset detection IC. The EV kit is designed to demonstrate the IC s headset
MAX15096/A/D Evaluation Kits. Evaluate: MAX15096/MAX15096A/MAX15096D. General Description. Features. Component List
General Description The MAX15096/A/D evaluation kit (EV kit) provides a proven design to evaluate the MAX15096 hot-swap controller with an integrated 6A MOSFET. The EV kit is configured to pass 6A in a
MAX9729 Evaluation Kit/Evaluation System
19-0958; Rev 0; 8/07 MAX9729 Evaluation Kit/Evaluation System General Description The MAX9729 evaluation kit (EV kit) is a fully assembled and tested printed-circuit board (PCB) that evaluates the MAX9729
MAX9611PMB1 Peripheral Module
9-68; Rev 0; 5/ General Description The MAX96PMB peripheral module provides the necessary hardware to interface the MAX96 currentsense amplifier with -bit ADC and op amp, along with the MAX580 8-bit DAC,
MAX4899AE Evaluation Kit. Evaluates: MAX4899AE/MAX4899E
19-4025; Rev 0; 1/08 General Description The MAX4899AE evaluation kit (EV kit) provides a proven design to evaluate the MAX4899AE USB 2.0 high-speed, fault-tolerant 4:1 multiplexer. The EV kit routes a
+Denotes lead-free and RoHS-compliant.
9-4067; Rev 0; /08 MAX95 Evaluation Kit General Description The MAX95 evaluation kit (EV kit) is a fully assembled and tested printed-circuit board (PCB) that simplifies the evaluation of the MAX95 400Mbps,
MAX3804 Evaluation Kit. Evaluates: MAX3804. Features DC-Coupled EV Kit SMA Connectors for All High-Speed Inputs and Outputs Fully Assembled and Tested
19-2821; Rev 1; 2/09 General Description The MAX3804 DC-coupled evaluation kit (EV kit) simplifies evaluation of the MAX3804 12.5Gbps settable equalizer. The EV kit enables full testing of the device functions
+Denotes lead-free and RoHS-compliant.
19-3107; Rev 0; 12/07 MAX1493 Evaluation Kit General Description The MAX1493 is a low-power, 4.5-digit analog-to-digital converter (ADC) with integrated liquid-crystal display (LCD) drivers. The MAX1493
MAX5705A, MAX5705B, MAX5803, MAX5804, MAX5805A, MAX5805B
General Description The MAX5X05 evaluation kit (EV kit) demonstrates the MAX5705 and MAX5805 12-bit, single-channel, lowpower DACs with internal reference and buffered voltage output. The MAX5705 and the
Evaluates: MAX2120. MAX2120 Evaluation Kit. General Description. Features. Ordering Information. Component List
General Description The MAX2120 evaluation kit (EV kit) simplifies the testing and evaluation of the IC direct-conversion tuner. The evaluation kit is fully assembled and tested at the factory. Standard
MAX6620 Evaluation Kit/Evaluation System
19-4069; Rev 0; 3/08 MAX6620 Evaluation Kit/Evaluation System General Description The MAX6620 evaluation system (MAX6620EVCMAXQU+) consists of the MAX6620 evaluation kit (MAX6620EVKIT+) and the Maxim CMAXQUSB+
Evaluate: MAX14589E/MAX14594E/ MAX MAX14589E/MAX14594E/ MAX14689 Evaluation Kits. Features and Benefits. General Description.
Evaluation Kits General Description The MAX14589E/MAX14594E/ evaluation kits (EV kits) are fully assembled and tested circuit boards that demonstrate the functionality of the MAX14589E, MAX14594E, and
MAX14830 Evaluation Kit Evaluates: MAX14830
19-6127; Rev 1; 7/12 MAX14830 Evaluation Kit General Description The MAX14830 evaluation kit (EV kit) provides a proven design to evaluate the MAX14830 quad-channel universal asynchronous receiver-transmitter
Features. General Description. Component List
General Description The MAX5217 evaluation kit (EV kit) demonstrates the MAX5217, 16-bit, single-channel, low-power, buffered voltage-output DAC. The IC comes in an 8-pin µmax package. The EV kit provides
Evaluates: MAX98357A/MAX98357B (TQFN) MAX98357 Evaluation System (TQFN)
General Description The MAX98357 development board (DEV board) is a fully assembled and tested PCB that evaluates the MAX98357 I2S digital input Class D power amplifier. The DEV board operates from a single
S 27-Bit Parallel Interface S Rosenberger Connector (Cable Included) S Proven PCB Layout S Fully Assembled and Tested. Maxim Integrated Products 1
19-90; Rev 0; 9/09 MAX97/MAX98 Evaluation Kit General Description The MAX97/MAX98 evaluation kit (EV kit) provides a proven design to evaluate the MAX97 7-bit,.5MHz to MHz DC-balanced LVDS serializer and
MAX6966 Evaluation Kit/Evaluation System
19-3999; Rev 1; 5/08 MAX6966 Evaluation Kit/Evaluation System General Description The MAX6966 evaluation (EV) kit is an assembled and tested PCB that demonstrates the capabilities of the MAX6966 constant-current
DS1086LPMB1 Peripheral Module
General Description The DS1086LPMB1 peripheral module provides the necessary hardware to interface the DS1086L.V spread-spectrum EconOscillatorK to any system that utilizes PmodK-compatible expansion ports
S On-Board Clock Generator Capable of 33MHz and 16.5MHz. S Accessible Headers to All 8 Input/Output (I/O) Channels
19-5067; Rev 0; 11/09 MAX13055E Evaluation Kit General Description The MAX13055E evaluation kit (EV kit) provides a proven design to evaluate the MAX13055E 8-channel, bidirectional level translator. The
MAX15090/MAX15090A Evaluation Kits. Evaluate: MAX15090/MAX15090A. Features. General Description. Component List
General Description The MAX5090 evaluation kit (EV kit) provides a proven design to evaluate the MAX5090 hot-swap controller with an integrated 2A MOSFET. The MAX5090 EV kit is configured to pass 2A in
MAX14972 Evaluation Kit Evaluates: MAX14972
19-6165; Rev 0; 12/11 MAX14972 Evaluation Kit General Description The MAX14972 evaluation kit (EV kit) provides a proven design to evaluate the MAX14972 dual SuperSpeed USB 3.0 equalizer/redriver utilizing
S Complete 2:1 VGA Multiplexer S VGA Connections and Power S LED Indicators for Switch Connections S VGA Inputs/Outputs S Fully Assembled and Tested
19-5030; Rev 0; 10/09 MAX4885AE Evaluation Kit General Description The MAX4885AE evaluation kit (EV kit) is a fully assembled and tested circuit board that evaluates the MAX4885AE VGA 2:1 multiplexer.
S USB-PC Connection (Cable Not Included) S USB Powered (No External Power Supply Required) S Real-Time Data Acquisition Through the USB
19-5610; Rev 1; 8/11 MAXADClite Evaluation Kit General Description The MAXADClite evaluation kit (EV kit) evaluates the MAX11645, Maxim's smallest, very-low-power, 12-bit, 2-channel analog-to-digital converter
+Denotes lead(pb)-free and RoHS compliant.
19-4545; Rev 0; 4/09 General Description The MAX13235E evaluation kit (EV kit) provides a proven design to evaluate the MAX13235E, a 3Mbps RS-232 transceiver with low-voltage interface and enhanced electrostatic
+Denotes lead-free and RoHS-compliant
19-0997; Rev 0; 9/07 MAX4208 Evaluation Kit General Description The MAX4208 evaluation kit (EV kit) simplifies evaluation of the MAX4208 ultra-low offset/drift, adjustable gain, precision instrumentation
+Denotes lead(pb)-free and RoHS compliant. C76, C77, C83 C86
19-5061; Rev 0; 11/09 MAX11046 Evaluation Kit General Description The MAX11046 evaluation kit (EV kit) provides a proven design to evaluate the MAX11046 8-channel, 16-bit, simultaneous-sampling ADC. The
MAX54X Evaluation Kit Evaluates: MAX541/MAX542
19-6340; Rev 0; 5/12 MAX54X Evaluation Kit General Description The MAX54X evaluation kit (EV kit) provides a proven design to evaluate the MAX541/MAX542 serial-input, voltage-output, 16-bit digital-to-analog
+Denotes lead(pb)-free and RoHS compliant.
19-4161; Rev 1; 12/08 MAX5498 Evaluation Kit General Description The MAX5498 evaluation kit (EV kit) is an assembled and tested PCB that demonstrates the MAX5498 10-bit (1024-tap), dual, nonvolatile, SPI
+Denotes lead-free and RoHS compliant. C38 C43, C62, C64, C65, C66, C68, C70, C72, C73, C74, C76 C44 C49, C67, C75 C63, C69, C71, C77
19-4354; Rev 0; 10/08 MAX17108 Evaluation Kit General Description The MAX17108 evaluation kit (EV kit) is a fully assembled and tested surface-mount PCB that evaluates the MAX17108 10-channel, high-voltage
Evaluates: MAX14571 MAX MAX14571 Evaluation Kit. General Description. Features. MAX14571 EV Kit Photo
General Description The MAX14571 evaluation kit (EV kit) demonstrates the MAX14571 adjustable overvoltage and overcurrent protector in a 14-pin TSSOP surface-mount package with an exposed pad. The EV kit
MAX16128/MAX16129 Evaluation Kits. Evaluate: MAX16128/MAX General Description. Features. Component List
General Description The MAX16128/MAX16129 evaluation kits (EV kits) demonstrate high overvoltage protection of the MAX16128/ MAX16129 for automotive applications that must survive load-dump and high-voltage
MAX7311 Evaluation Kit. Evaluates: MAX7311
19-4151; Rev 0; 5/08 General Description The MAX7311 evaluation kit (EV kit) provides a proven design to evaluate the MAX7311 I 2 C-compatible 16-bit I/O port expander, with each port configurable as input
S Fully Assembled and Tested C4, C8, C12, C16 C5, C6, C9, C13. Maxim Integrated Products 1
19-5118; Rev 0; 1/10 MAX5393 Evaluation System General Description The MAX5393 evaluation kit (EV kit) is a fully assembled and tested PCB that features the MAX5393M 256-tap, 50kI, dual digital potentiometer.
Maxim Integrated Products 1
9-2479; Rev 0; 6/02 MAX28 Evaluation Kit General Description The MAX28 evaluation kit (EV kit) is designed to evaluate the MAX28. The MAX28 is a 2-bit, 2-channel (six differential-channel) ADC with a 2-wire
+Denotes lead-free and RoHS-compliant.
19-0993; Rev 0; 9/07 MAX4209 Evaluation Kit General Description The MAX4209 evaluation kit (EV kit) simplifies evaluation of the MAX4208 ultra-low offset/drift, fixed gain, precision instrumentation amplifier
S One SATA Host Connector S Two SATA Device Connectors
19-5166; Rev 0; 2/10 MAX4986 Evaluation Kit General Description The MAX4986 evaluation kit (EV kit) provides a proven design to evaluate the MAX4986 SAS/SATA 2:1/1:2 multiplexer/demultiplexer. The EV kit
Maxim Integrated Products 1
19-5229; Rev 0; 4/10 MAX14885E Evaluation Kit General Description The MAX14885E evaluation kit (EV kit) is a fully assembled and tested surface-mount PCB that utilizes the MAX14885E device to implement
+Denotes lead(pb)-free and RoHS compliant. C35 1 C36 1 D2 1 D3 1 FB1 1 P1 1
19-4306; Rev 0; 10/08 General Description The MAX9132 evaluation kit (EV kit) provides a proven design to evaluate the MAX9132 high-speed multipleport LVDS crossbar switches. The MAX9132 has three input
Features. General Description. Ordering Information. Component List
General Description The MAX2117 evaluation kit (EV kit) simplifies the testing and evaluation of the device direct-conversion tuner. The evaluation kit is fully assembled and tested at the factory. Standard
+Denotes lead(pb)-free and RoHS compliant. FOUTL-, FOUTL+, FOU TR-, FO U TR+, V D D, P G N D
19-4071; Rev 1; 9/09 MAX9736A Evaluation Kit General Description The MAX9736A evaluation kit (EV kit) is a fully assembled and tested printed-circuit board (PCB) that configures the MAX9736A Class D amplifier
S Low-Power Shutdown Input S Fully Assembled and Tested. Maxim Integrated Products 1
19-5599; Rev 0; 10/10 MAX98303 Evaluation Kit General Description The MAX98303 evaluation kit (EV kit) is a fully assembled and tested PCB that evaluates the MAX98303 stereo 3.1W Class D amplifier in a
Maxim Integrated Products 1
9-97; Rev 0; 8/04 MAX406 Evaluation Kit General Description The MAX406 evaluation kit (EV kit) is a fully assembled and tested surface-mount circuit board that demonstrates the MAX406 logarithmic amplifier.
Evaluates: EV Kits Requiring SPI/ Parallel to USB Interface. INTF3000 Interface Board. General Description. Quick Start. Benefits and Features
INTF3000 Interface Board Evaluates: EV Kits Requiring SPI/ Parallel to USB Interface General Description The INTF3000 interface board is designed to facilitate the interfacing of Maxim s evaluation kit
MAX6651 Evaluation Kit/Evaluation System
19-1980; Rev 1; 5/07 MAX6651 Evaluation Kit/Evaluation System General Description The MAX6651 evaluation kit (EV kit) is an assembled and tested printed-circuit board (PCB) that demonstrates the MAX6651
+Denotes lead-free and RoHS compliant.
19-2446; Rev 1; 6/08 MAX17062 Evaluation Kit General Description The MAX17062 evaluation kit (EV kit) is a fully assembled and tested surface-mount PCB that provides the voltages required for active-matrix,
S Fully Assembled and Tested. Maxim Integrated Products 1
19-4808; Rev 0; 1/10 MAX5386M Evaluation System General Description The MAX5386M evaluation kit (EV kit) is an assembled and tested PCB that features the MAX5386M 50kI dual digital potentiometers. The
INSTALL.EXE. Maxim Integrated Products 1
9-258; Rev 0; 9/02 MAX06 Evaluation Kit General Description The MAX06 evaluation kit (EV kit) is designed to evaluate the MAX06. The MAX06 is an 8-bit four-channel (two-differential-channel) ADC with a
Maxim Integrated Products 1
19-2467; Rev 0; 4/02 MAX1236 Evaluation Kit General Description The MAX1236 evaluation kit (EV kit) is designed to evaluate the MAX1236. The MAX1236 is a 12-bit, four-channel (two differential-channel)
S U1 Configured for Filterless Output S U2 Configured for Filtered Output S Fully Assembled and Tested. Maxim Integrated Products 1
19-5505; Rev 0; 9/10 MAX98400B Evaluation Kit General Description The MAX98400B evaluation kit (EV kit) configures the MAX98400B Class D amplifier to drive 2x12W into a pair of 8I speakers in stereo mode
+Denotes lead(pb)-free and RoHS compliant. Maxim Integrated Products 1
19-4957; Rev 0; 9/09 General Description The MAX3162 evaluation kit (EV kit) provides a proven design to evaluate the MAX3162 programmable RS-232/ RS-485/422 multiprotocol transceiver. The MAX3162 EV kit
MAX6642 Evaluation System/Evaluation Kit
19-3417; Rev 0; 9/04 MAX6642 Evaluation System/Evaluation Kit General Description The MAX6642 evaluation kit (EV kit) is an assembled and tested PC board with a mounted MAX6642. The EV kit allows full
Maxim Integrated Products 1
19-3093; Rev 0; 12/03 MAX3942 Evaluation Kit General Description The MAX3942 evaluation kit (EV kit) is an assembled demonstration board that provides electrical evaluation of the MAX3942 10.7Gbps modulator
MAX3160E Evaluation Kit. Evaluates: MAX3160E. Features
9-076; Rev 0; 4/07 MAX60E Evaluation Kit General Description The MAX60E evaluation kit (EV kit) circuit demonstrates the RS-/RS-485/RS-4 multiprotocol transceivers using the MAX60E IC. The circuit can
Detailed Description of Hardware. General Description. Features. Hardware Modification
General Description The MAX14750 evaluation kit (EV kit) is a fully assembled and tested circuit for evaluating the MAX14720/MAX14750 power-management solutions with I2C capability for space-constrained,
MAX3161E Evaluation Kit. Evaluates: MAX3161E. Features
19-0803; Rev 0; 4/07 MX3161E Evaluation Kit General Description The MX3161E evaluation kit (EV kit) circuit demonstrates the RS-232/RS-485/RS-422 multiprotocol transceivers using the MX3161E IC. The circuit
Maxim Integrated Products 1
9-366; Rev ; 2/06 General Description The MAX8727 evaluation kit (EV kit) is a fully assembled and tested surface-mount circuit board that contains a pulse-width-modulated (PWM) step-up DC-DC converter.
MAX544X Evaluation Kit Evaluates: MAX5441 MAX5444
19-6314; Rev 0; 5/12 MAX544X Evaluation Kit General Description The MAX544X evaluation kit (EV kit) provides a proven design to evaluate the MAX5441 MAX5442 serial-input, voltage-output, 16-bit digital-to-analog
MAXREFDES24EVSYS User Manual
MAXREFDES24EVSYS User Manual Rev 1; 1/15 ADCLITE2 ANALOG SIGNAL CAPTURE GUI Windows PC REFDES24 4-CHANNEL ANALOG OUTPUT GUI 20 30VDC (>150mA) MAXREFDES24 MAX1659 LDO MAX17498 FLYBACK CONTROL MAX6126 VREF
+Denotes lead-free and RoHS compliant. JU5, JU6, JU9 JU13 LED1, LED3 LED14
19-4303; Rev 0; 10/08 MAX6956 Evaluation Kit General Description The MAX6956 evaluation kit (EV kit) is a fully assembled and tested surface-mount PCB that contains a MAX6956 IC. The MAX6956 is a 28-port
MAX9768 Evaluation Kit/Evaluation System
9-; Rev 0; /07 MAX9768 Evaluation Kit/Evaluation System General Description The MAX9768 evaluation kit (EV kit) is a fully assembled and tested printed-circuit board (PCB) that demonstrates the capabilities
+Denotes lead(pb)-free and RoHS compliant. R1, R2, R3, R103
19-4544; Rev 0; 4/09 MAX6662 Evaluation Kit General Description The MAX6662 evaluation kit (EV kit) provides a proven design to evaluate the MAX6662 12-bit + sign temperature sensor with SPI -compatible
Maxim Integrated Products 1
9-904; Rev 0; 7/0 MAX406 Evaluation Kit General Description The MAX406 evaluation kit (EV kit) is a fully assembled and tested circuit board that uses the MAX406 lownoise microphone amplifier IC designed
Features The MAX31865 evaluation kit (EV kit) provides the hardware and software (graphical user interface) necessary. General Description
MAX865 Evaluation Kit General Description Features The MAX865 evaluation kit (EV kit) provides the hardware and software (graphical user interface) necessary to evaluate the MAX865 RTD-to-digital Converter.
MAX15501 Evaluation Kit Evaluates: MAX15500/MAX15501
General Description The MAX15501 evaluation kit (EV kit) provides a proven design to evaluate the MAX15501 analog output conditioner that provides a programmable current up to Q24mA, or a voltage up to
MAX5391L/MAX5391N Evaluation Systems
19-5104; Rev 0; 12/09 MAX5391L/MAX5391N Evaluation Systems General Description The MAX5391L and MAX5391N evaluation kits (EV kits) are fully assembled and tested PCBs that feature the MAX5391L (10kI) and
Maxim Integrated Products 1
19-1883; Rev 1; 2/07 MAX1799 Evaluation System/ General Description The MAX1799 evaluation system (EV system) consists of a MAX1799 evaluation kit (EV kit) and a companion Maxim CMAXQUSB board. The MAX1799
Evaluates: MAX MAX20326 Evaluation Kit. General Description. Quick Start. Features. EV Kit Contents. Required Equipment.
General Description The MAX20326 evaluation kit (EV kit) provides a convenient way to evaluate the MAX20326 dual precision bus accelerator IC. The EV kit breaks out the pins of the IC to test points enabling
MAX6692 Evaluation System/Evaluation Kit
19-2707; Rev 0; 10/02 MAX6692 Evaluation System/Evaluation Kit General Description The MAX6692 evaluation system (EV system) consists of a MAX6692 evaluation kit (EV kit) and a companion Maxim SMBus interface
Evaluates: MAX MAX20310 Evaluation Kit. Quick Start. General Description. Features. Detailed Description of Hardware. Required Equipment
General Description The MAX20310 evaluation kit (EV kit) is a fully assembled and tested circuit for evaluating the MAX20310 medical wearable, power-management solution with I2C capability for low-power
CLK1, CLKIN, CLKOUT, OUTA, OUTB
9-82; Rev 2; 5/ Evaluation Kit General Description The evaluation kit (EV kit) is a fully assembled and tested circuit board that contains all the components necessary for evaluating the. The is a dual,0-bit,
Evaluates: MAX35103, MAX MAX35103EVKIT2 Evaluation Kit. General Description. Benefits and Features. MAX35103EVKIT2 Example Application
General Description The MAX35103EVKIT2 provides an application example using the MAX35103 time-to-digital converter to measure water flow as part of an off-the-shelf residential irrigation system. The
MAX3983 SMA Connector Evaluation Kit
19-3340; Rev 0, 7/04 MAX3983 SMA Connector Evaluation Kit General Description The MAX3983 SMA Connector evaluation kit (EV Kit) is an assembled demonstration board that provides electrical evaluation of
S 16 Channels of Programmable Gamma S 10-Bit Resolution S On-Board Microcontroller to Generate I²C Commands
19-4918; Rev 0; 8/09 MAX9674 Evaluation Kit General Description The MAX9674 evaluation kit (EV kit) demonstrates the MAX9672/MAX9673/MAX9674 reference voltage generator for gamma correction in TFT-LCD
MAX1379 Evaluation Kit. Evaluates: MAX1379
19-4296; Rev 0; 10/08 General Description The MAX1379 evaluation kit (EV kit) is a fully assembled and tested PCB that evaluates the MAX1379 dual, 12-bit, 1.25Msps, simultaneous sampling ADC. The EV kit
MAX8858 Evaluation Kit. Evaluates: MAX8858
19-4449; Rev 0; 2/09 General Description The MAX8858 evaluation kit (EV kit) is a fully assembled and tested PCB for evaluating the MAX8858 powermanagement IC (PMIC). The MAX8858 PMIC provides a compact
S IEEE 802.3af/at-Compliant PSE Circuit. Maxim Integrated Products 1
19-5740; Rev 0; 1/11 MAX5971A Evaluation Kit General Description The MAX5971A evaluation kit (EV kit) is a fully assembled and tested surface-mount circuit board featuring an Ethernet single-port power-sourcing
Features. General Description. Component List
MAX5988A Evaluation Kit Evaluates: MAX5988A General Description The MAX5988A evaluation kit (EV kit) is a fully assembled and tested surface-mount circuit board featuring an Ethernet port, network powered-device
Maxim Integrated Products 1
19-3717; Rev 1; 11/05 MAX1179 Evaluation Kit General Description The MAX1179 evaluation kit (EV kit) is an assembled and tested circuit board that demonstrates the MAX1179 analog-to-digital converter.
MAX17048/MAX17049 Evaluation Kits Evaluate: MAX17048/ MAX17049
19-6239; Rev 0; 3/12 General Description The MAX17048/MAX17049 evaluation kits (EV kits) consist of the MAX17048/MAX17049 evaluation kit (EV kit) and the Maxim DS91230+ command module. A Windows XP M -,
JU1 JU6, JU15 JU20. Maxim Integrated Products 1
9-9; Rev 0; /0 MAX9 Evaluation Kit General Description The MAX9 evaluation kit (EV kit) contains a flowthrough low-voltage differential signaling (LVDS) quad differential line driver (MAX9) and receiver
AN I 2 S/TDM Output MEMS Microphone Flex Evaluation Boards
I S/TDM Output MEMS Microphone Flex Evaluation Boards GENERAL DESCRIPTION This user guide applies to the following MEMS microphone evaluation boards: EV_INMP FX EV_ICS FX EV_ICS 000 FX These are simple