ODU-MINI-SNAP. Series S - IP50 and IP68 FP-Locking Concept Keying with Insulation Body. Series S

Size: px

Start display at page:

Download "ODU-MINI-SNAP. Series S - IP50 and IP68 FP-Locking Concept Keying with Insulation Body. Series S"

Sherman Tate
6 years ago
Views:

1 OU-MINI-SNAP Series S - IP and IP68 FP-Locking Concept Keying with Insulation Body Series S

2 OU-MINI-SNAP Series S The Push-Pull Locking Principle: FP Locking roove Conical Sleeve Locking Fingers Outer Housing Back Nut Receptacle Plug OU-MINI-SNAP connector in unmated condition. OU-MINI-SNAP connector in mated condition. Pulling on the cable or on the back nut causes the locking fingers to grip tighter into the groove inside the receptacle. A separation is virtually impossible. Pulling on the outer plug housing disengages the locking fingers from the receptacle groove and the connector separates easily. Page 96 OU-Steckverbindungssysteme mbh & Co. K, Pregelstr., -8 Mühldorf/Inn, Tel. +9/86 /6 6-, Fax +9/86 /6 6 9,

3 Series S OU-MINI-SNAP OU-MINI-SNAP with FP-Locking Scheme in Cross Section Cable Collet Nut OU-MINI-SNAP Plug Shield Locking Ring EMI Ring Back Nut Single Conductor Inner Housing Half Shells Lamella Contacts Locking Finger Insulator uide Ring Outer Housing Hex Nut Conical Sleeve Locking roove Contacts Press Ring Insulator Housing OU-MINI-SNAP Receptacle OU-Steckverbindungssysteme mbh & Co. K, Pregelstr., -8 Mühldorf/Inn, Tel. +9/86 /6 6-, Fax +9/86 /6 6 9, Page 97

4 OU-MINI-SNAP Series S Available Housing Sizes (Scale : ) O = Outside iameter (Plug) S = Size O: 9, S: Page 98 OU-Steckverbindungssysteme mbh & Co. K, Pregelstr., -8 Mühldorf/Inn, Tel. +9/86 /6 6-, Fax +9/86 /6 6 9,

5 Series S OU-MINI-SNAP The S. Type = Receptacle K = In-Line Receptacle S = Straight Plug. Style - 9 and A - Z X = Special. Size -. Series S. Coding 6. Material/Surface - Housing (Page ) 7. empty 8. Material - Insulator (Page ) Contact Insert (Page 7-) e.g. 8-way = 8. Contact Type/Surface (Page ). Contact iameter (Page ) M = mixed arrangement. +. Term. Cross Section (Page ). for special Contact Configurations 9. empty Collet System (Page ) Cable Bend Relief (Page 6) Example: S C T 8 L J Receptacle - Style - Size - Series S - Brass matt chromate Housing - PBT Insulator - 8pos. - Socket & Pin (solder),7 µm Au -Term. Cross Section AW S S C T 8 M J 7 E P Plug - Style - Size - Series S - Brass matt chromate Housing - PBT Insulator - 8pos. - Pin & Socket (solder),7 µm Au - Term. Cross Section AW - Cable iameter Blue Cable Bend Relief - Material PUR OU-Steckverbindungssysteme mbh & Co. K, Pregelstr., -8 Mühldorf/Inn, Tel. +9/86 /6 6-, Fax +9/86 /6 6 9, Page 99

6 OU-MINI-SNAP Series S S S S S S Straight Plug - IP with Standard Back Nut - IP with Back Nut for Cable Bend Relief - IP 68 watertight with Standard Back Nut - IP 68 watertight with Back Nut for Cable Bend Relief IP Contact configuration from page 7 IP 68 L L (Suitable for all following receptacles and in-line receptacles) S S L L L L S S L L imensions in mm Size L L ~ 7 ~ 8 9, 8 7 ~ 7 ~ ~ ~ 8 imensions in mm Size L L ~ ~ 9, 8 7 ~ 9 ~ 8 ~ ~ Page OU-Steckverbindungssysteme mbh & Co. K, Pregelstr., -8 Mühldorf/Inn, Tel. +9/86 /6 6-, Fax +9/86 /6 6 9,

7 Series S OU-MINI-SNAP S A A Panel-Mounted Plug - IP with hex nut, non latching (Suitable for all following receptacles and in-line receptacles) L L A A L Contact configuration from page 7 imensions in mm Ø Panel Size L L L Cut-Out 7,8, 8, SW 8, / Ø 9,, 9,, SW,6 / Ø,, 9,7, 8, 7 SW,6 / Ø, 9 6, SW 6,6 / Ø 8, SW OU-Steckverbindungssysteme mbh & Co. K, Pregelstr., -8 Mühldorf/Inn, Tel. +9/86 /6 6-, Fax +9/86 /6 6 9, Page

8 OU-MINI-SNAP Series S S K K K K In-Line Receptacle - IP with Standard Back Nut - IP with Back Nut for Cable Bend Relief - IP 68 watertight with Standard Back Nut - IP 68 watertight with Back Nut for Cable Bend Relief IP Contact configuration from page 7 IP 68 L L K K L L K K imensions in mm Size L ~ ~ ~ imensions in mm Size L ~ 8 7 ~ 6 OU-MINI-SNAP In-Line Receptacle connect to plug for cable-to-cable connection. Page OU-Steckverbindungssysteme mbh & Co. K, Pregelstr., -8 Mühldorf/Inn, Tel. +9/86 /6 6-, Fax +9/86 /6 6 9,

9 Series S OU-MINI-SNAP S ) L = Maximum Length incl. Contact Insert ) L = Length of Housing Receptacle Style OU-MINI-SNAP RECEPTACLE IP, installation from front of panel L L L C Technical ata IP anti-rotation feature contact configuration from page 7 M imensions in mm Ø Panel Size ) ) L L L M C Cut-Out ~9, ~ 9,, 9x,,, 8,, SW 8, / Ø 9, ~, ~ 8, 6, x,,,,, SW, / Ø, ~, ~, 8, x, 8, 7,,, SW,6 / Ø, SW Style OU-MINI-SNAP WATERTIHT RECEPTACLE IP 68*, installation from front of panel L L C Technical ata IP 68 contact configuration from page 7 distance ring for wall-thickness adjustment, see page 6 d imensions in mm Panel Ø Size ) ) ) L L L M C d Cut-Out ~7, ~,, 6x,, 9, 7,, 6, Ø 6, ) Min. wallthickness without using a distance ring Style OU-MINI-SNAP WATERTIHT RECEPTACLE IP 68*, installation from front of panel with low rear profile L L L C Technical ata IP 68 contact configuration from page 7 M imensions in mm Ø Panel Size ) ) L L L M C Cut-Out ~, ~, 8, 9x,,,,, SW 8, / Ø 9, ~, ~,, x, 8, 7,,, SW, / Ø, *Reference: Potted Receptacle please see page 8 III. SW OU-Steckverbindungssysteme mbh & Co. K, Pregelstr., -8 Mühldorf/Inn, Tel. +9/86 /6 6-, Fax +9/86 /6 6 9, Page

10 OU-MINI-SNAP Series S S ) L = Maximum Length incl. Contact Insert ) L = Length of Housing Receptacle Style OU-MINI-SNAP RECEPTACLE IP, CONTINUOUS THREA, installation from rear or front of panel. Front extension adjustable L L L M C Technical ata IP anti-rotation feature contact configuration from page 7 SW-C imensions in mm Ø Panel Size ) ) L L L M SW-C C SW Cut-Out ~9, ~ 8,, 9x,,, 8,,, SW 8, / Ø 9, ~, ~ 7, 6, x,,,,,, SW,6 / Ø, 6 Style 6 OU-MINI-SNAP RECEPTACLE IP WITH STRAIN RELIEF, without flange, with two nuts, installation from rear or front of panel L L C Technical ata SW-C M SW- IP anti-rotation feature contact configuration from page 7 7 imensions in mm Ø Panel Size L L M SW-C SW- SW Cut-Out ~, ~, x,,,,,,, SW,6 / Ø, ~9, ~ 7, x,, 7,,, 7,, SW,6 / Ø, Style 7 OU-MINI-SNAP RECEPTACLE IP, WITH STRAIN RELIEF, installation from front of panel L L C Technical ata IP anti-rotation feature contact configuration from page 7 SW-C M imensions in mm Ø Panel Size L L M SW-C C Cut-Out ~6, ~7, 9x,,, 8, 7,, SW 8, / Ø 9, SW Page OU-Steckverbindungssysteme mbh & Co. K, Pregelstr., -8 Mühldorf/Inn, Tel. +9/86 /6 6-, Fax +9/86 /6 6 9,

11 Series S OU-MINI-SNAP S ) L = Maximum Length incl. Contact Insert ) L = Length of Housing 8 Receptacle Style 8 OU-MINI-SNAP WATERTIHT RECEPTACLE IP 68*, with slotted nut, installation from rear of panel L L Technical ata M IP 68 anti-rotation feature contact configuration from page 7 nutdriver for slotted mounting nut see page 68 L C imensions in mm Ø Panel Size ) ) L L L M C Cut-Out ~, ~, 8, x,, 6, SW 9, / Ø, ~7, ~,, 6x,, 8, SW, / Ø 6, Style OU-MINI-SNAP RECEPTACLE IP 68*, with round nut, installation from rear of panel L L M Technical ata SW IP anti-rotation feature contact configuration from page 7 L C Q imensions in mm Ø Panel Size ) ) L L L M C Cut-Out ~, ~, 8, x,,, 9, 6, SW 9, / Ø, ~9, ~,, 6x,, 9,, 8, SW, / Ø 6, Style Q OU-MINI-SNAP RECEPTACLE IP, CONTINUOUS THREA, (see style, but special nuts) installation from rear or front of panel. Extension in front of panel is adjustable SW L M L L C Technical ata IP anti-rotation feature contact configuration from page 7 nutdriver for slotted mounting nut, see page 68 imensions in mm Ø Panel Size ) ) L L L M C Cut-Out ~9, ~ 7,, 9x,, 8,, SW 8, / Ø 9, *Reference: Potted Receptacle please see page 8 III. OU-Steckverbindungssysteme mbh & Co. K, Pregelstr., -8 Mühldorf/Inn, Tel. +9/86 /6 6-, Fax +9/86 /6 6 9, Page SW

12 OU-MINI-SNAP For your notes Page 6 OU-Steckverbindungssysteme mbh & Co. K, Pregelstr., -8 Mühldorf/Inn, Tel. +9/86 /6 6-, Fax +9/86 /6 6 9,

13 Contact Configuration Series S PCB and solder contacts are factory-installed in the insulation body. Crimp contacts are shipped separately.

14 OU-MINI-SNAP Series S Size S Terminations ) Size Series Positions Positions Contact ) Ø mm Nominal Signal Contact Current Load in A* Test Voltage acc. VE 67 ) Solder Crimp 7) PCB View on termination side Pin Part Socket Standard-Polbilder A) S S S,9 87,7 7 87,7 7 S S B S ) In most cases the operating voltage according to MIL-ST-, Method is twice as high as according to VE. ) Termination cross section see page ) Termination and surface see page 7) Tools for assembly see page 6 to 68 * erating Factor see page 86 A) Standard Contact Configuration (compatible with other manufacturers) Crimp and Print Termination on request Coaxial and triaxial connectors please see on page 6 Page 8 OU-Steckverbindungssysteme mbh & Co. K, Pregelstr., -8 Mühldorf/Inn, Tel. +9/86 /6 6-, Fax +9/86 /6 6 9,

15 Series S OU-MINI-SNAP Size S Terminations ) Size Series Positions Positions Contact ) Ø mm Nominal Signal Contact Current Load in A* Test Voltage acc. VE 67 ) Solder Crimp 7) PCB View on termination side Pin Part Socket Standard-Polbilder A) S, S, S,9 S B S,9 S B S x,9 x,7 7 S 6,7 7 S 6 B 6 ) In most cases the operating voltage according to MIL-ST-, Method is twice as high as according to VE. ) Termination cross section see page ) Termination and surface see page 7) Tools for assembly see page 6 to 68 * erating Factor see page 86 A) Standard Contact Configuration (compatible with other manufacturers) Crimp and Print Termination on request Coaxial and triaxial connectors please see on page 6 OU-Steckverbindungssysteme mbh & Co. K, Pregelstr., -8 Mühldorf/Inn, Tel. +9/86 /6 6-, Fax +9/86 /6 6 9, Page 9

16 OU-MINI-SNAP Series S Size S Terminations Size Series Positions Positions Contact ) Ø mm Nominal Signal Contact Current Load in A* Test Voltage acc. VE 67 ) Solder Crimp 7) PCB View on termination side Pin Part Socket S,6 7 S B Standard Contact Configuration A S S S 6,,, 87,9 S S 8 S S S S B B B 6 8 B 7 6 S 87,9 9 S B 7 6 ) In most cases the operating voltage according to MIL-ST-, Method is twice as high as according to VE. ) Termination cross section see page ) Termination and surface see page 7) Tools for assembly see page 6 to 68 * erating Factor see page 86 A) Standard Contact Configuration (compatible with other manufacturers) Crimp and Print Termination on request Page OU-Steckverbindungssysteme mbh & Co. K, Pregelstr., -8 Mühldorf/Inn, Tel. +9/86 /6 6-, Fax +9/86 /6 6 9,

17 etails for the : Housing Materials / Surfaces Insulation Body Material Contacts Contact Termination Cross Section (AW) Collet System Bend Protection Sleeves

18 OU-MINI-SNAP etails for the Housing Materials / Surfaces S C Standard Cu-alloy / matt chromate Special materials and surfaces on request. N Cu-alloy / nickel S Cu-alloy / black chromate Insulation Body Material S T PBT P PEEK Additional materials on request. Turned Contact Article Number PBT PEEK Solder Termination Crimp Termination PCB Termination = available - Page OU-Steckverbindungssysteme mbh & Co. K, Pregelstr., -8 Mühldorf/Inn, Tel. +9/86 /6 6-, Fax +9/86 /6 6 9,

19 etails for the OU-MINI-SNAP Contact Type / Contact Surface - Contact iameter S Type Socket Pin Socket Pin Socket Pin Surface L -,7 µm Au (min.) L -,7 µm Au (min.) C-,7 µm Au (min.) C -,7 µm Au (min.) P -,7 µm Au (min.) P -,7 µm Au (min.) L M N P Q R Contact Ø,7,9,,6 Has to match with selected contact inserts F J P S L = Solder termination C = Crimp termination P = PCB termination OU-Steckverbindungssysteme mbh & Co. K, Pregelstr., -8 Mühldorf/Inn, Tel. +9/86 /6 6-, Fax +9/86 /6 6 9, Page

20 OU-MINI-SNAP etails for the Contact Termination Cross Sections S Crimp Contact Contact Ø Size AW mm,9 /6,/,,9,8,9 /6,/, Tools for crimping and their adjustments see Page 66.,9 /,/,8 H, 8, L Solder Contact Contact Ø Term. Ø Term. Cross AW mm,7,6 6,,9,8,8,,, H,6, 8, N PCB Contact Contact Ø Term. Ø,9,7 Page OU-Steckverbindungssysteme mbh & Co. K, Pregelstr., -8 Mühldorf/Inn, Tel. +9/86 /6 6-, Fax +9/86 /6 6 9,

21 etails for the OU-MINI-SNAP Collet System Kabel-Ø Schirmklemmring Verdrehsicherung S Cable diameter in mm Size Spannzange >, -, >, -, Insert: for all Plugs and In-Line Receptacles. >, -, Application: Collet nut for strain relief, EMI ring for conductive path between shield and housing. >, -, >, -, >, -, >, -, >, - 6, 6 > 6, - 6, > 6, - 7, > 7, - 7, > 7, - 8, > 8, - 8, 8 > 8, - 9, 9 without collet system OU-Steckverbindungssysteme mbh & Co. K, Pregelstr., -8 Mühldorf/Inn, Tel. +9/86 /6 6-, Fax +9/86 /6 6 9, Page

22 OU-MINI-SNAP etails for the Cable Bend Relief S Color of the Cable Bend Relief Color / RAL-Number (similar) red RAL A white RAL 9 B yellow RAL 6 C green RAL 69 blue RAL E grey RAL 7 F black RAL 9 orange RAL H purple RAL J brown RAL 86 K light green RAL 68 L light blue RAL M Temperature range PUR - ºC up to +8 ºC Short-term up to + ºC Material PUR without cable bend relief P Page 6 OU-Steckverbindungssysteme mbh & Co. K, Pregelstr., -8 Mühldorf/Inn, Tel. +9/86 /6 6-, Fax +9/86 /6 6 9,

ODU MINI-SNAP PC Product Description. ODU MINI-SNAP PC: The Connector with Push-Pull-Locking in Plastic

ODU MINI-SNAP PC Product Description ODU MINI-SNAP PC: The Connector with Push-Pull-Locking in Plastic Cylindrical Connectors are generally available with several locking mechanisms: The most frequently