Blue ID Communication module RS485 SC44

Size: px

Start display at page:

Download "Blue ID Communication module RS485 SC44"

Harvey Cameron
6 years ago
Views:

Blue ID Communication module RS485 Modular design An Blue ID Communication module RS485 provides the system with two RS485 ports for serial communication and is used to connect field bus devices.

system power supply monitoring clear labelling of ports LED for communication status per port LED for status of module Blue ID Lifeline text card for identification of ports All communication modules

1 Blue ID Communication module RS485 Modular design An Blue ID Communication module RS485 provides the system with two RS485 ports for serial communication and is used to connect field bus devices. Characteristics two RS485 ports for serial communication ports electrically isolated from system neutral ports electrically isolated from each other both ports have an A, B and 0 connection 24 V system power supply monitoring clear labelling of ports LED for communication status per port LED for status of module Blue ID Lifeline text card for identification of ports All communication modules (A) have the same base (B). You simply click the base with module onto the DIN rail (C). Hot swappable A module can easily be removed from and placed back in the base without tools. This can be done live (hot swappable). Electrical isolation The module's ports are electrically isolated from the system neutral. In addition the RS485 ports are electrically isolated from each other. 1

Clear indication Legend A B C D E F Blue ID Lifeline LED for status of port RS485-1 port RS485-1 LED for status of port RS485-2 port RS485-2 LED for status of module Blue ID Lifeline The modules are

2 Clear indication Legend A B C D E F Blue ID Lifeline LED for status of port RS485-1 port RS485-1 LED for status of port RS485-2 port RS485-2 LED for status of module Blue ID Lifeline The modules are equipped with blue LEDs. Together, these LEDs form the Blue ID Lifeline. If the blue line is continuously on, the modules and bases are in the correct place according to the configuration in TC Engineer. LEDs for status of ports Per port, an LED clearly indicates the port's status. The LED is continuously green when the module is working. In other situations, the LED flashes or is off. In the event of a communication error, the LED is red as long as the error is present. LED for status of module The LED shows the status of the module. The LED is on continuously when the module is working correctly. If not, and in special circumstances, the LED flashes. Connection examples Making a two-wire connection Termination and connecting base circuit 2

3 Specifications module General Module article description Module article number Base article description Base article number Number of RS485 ports Dimensions (XYZ) Weight Maximum power consumption MTBF¹ Construction Mounting of base Material Blue ID Communication module RS Blue ID SC Communication base x 40 x mm (6.36 x 1.57 x 3.94 inches) module: 110 grams base: 120 grams 2.0 W module: 4,380,000 hours base: 8,760,000 hours removable module on a base clicks onto DIN rail mixture of polycarbonate and ABS ¹ The MTBF is calculated according to the Telcordia SR-332 standard Issue 2 under the following conditions: - ambient temperature: C - supply voltage: 24 VDC - time in operation per day: 24 hours - reliability level: 60 % 3

4 Communication Standard used Bus load Bias resistance Baud rates Other parameters TIA/EIA-485 1/2 Unit Load 47 kω 1k2, 2k4, 4k8, 9k6, 19k2, 38k4, 57k6, 76k8 and 115k2 bps number of data bits: 7, parity: even, odd number of data bits: 8, parity: none, even, odd number of stop bits: 1 or 2 Internal termination and bias circuit with a baud rates above bps the network must be terminated at both ends and be equipped with a bias circuit termination and a bias circuit are not required for other baud rates Functional isolation of voltage between the ports mutually, and in relation to system neutral Accuracy of internal temperature measurement Protection of ports Cable type required Cross section Maximum cable length Connector type (supplied 2x) 240 V ± 2 C protected against incorrect connection of ± 30 VDC and 30 VAC twisted pair mm² (without ferrule connector) mm² (with ferrule connector) 500 m three-pin pluggable screw connector with A, B and 0 connection Indication Blue ID Lifeline red-green LEDs for status of ports green LED for status of module General specifications for controller, modules and bases Housing IP code Flammability class Recycle code Colour IP30 (NEN-EN-IEC 60529) FV-0 7 release surfaces of module and DIN rail release: blue (RAL5013) other parts: white (RAL9003) Mounting and connection Installation in control cabinet, accessible to authorised personnel only open device, to be used in an environment with a permitted pollution factor of 2 can be clicked onto mounting plate on horizontally or vertically positioned DIN rail Maximum width of I/O modules, bus extension modules and controller Environment Permitted temperature inside control cabinet during normal operation Permitted temperature inside control cabinet during transport and storage Permitted relative ambient humidity Shock and vibration resistance Installation category Permitted ambient pollution Note: The controller, SC module and SN module may only be mounted horizontally. 20 m 0 50 ºC 0 70 ºC 10 % - 95 % (non-condensing) IEC II pollution degree 2 4

5 Legislation and standards Canada / USA Europe CSA/UL approved, in compliance with: UL :2004 (measurement and control equipment) CSA C22.2 No (measurement and control equipment) ICES-003 Issue 4 Class B CE mark, in compliance with: Low voltage directive 2006/95/CE EMC directive 2004/108/EC RoHS directive 2011/65/EU in compliance with harmonised standard IEC :2010 (3rd Edition) in compliance with WEEE Directive 2002/96/EC International The Blue ID S10 Controller is BTL registered at BACnet International. The Blue ID S10 Controller is BACnet certified in accordance with ISO /6. Priva is a member of the BACnet Interest Group Europe. 5

6 Europe Office: UK Office: Canada Office: Your Priva partner: Priva Zijlweg 3 P.O. Box ZG De Lier The Netherlands T F sales.building@priva.nl Priva Zijlweg 3 PO Box ZG De Lier The Netherlands T +44 (0) F +44 (0) sales@priva.co.uk Priva North America Inc South Service Road Vineland Station Ontario LOR 2E0 Canada T +1(905) F +1(905) contact.priva@priva.ca _01.002_

Priva Blue ID Communication module RS485 SC44

Priva Blue ID Communication module RS485 Modular design An Priva Blue ID Communication module RS485 provides the system with two RS485 ports for serial communication and is used to connect field bus devices.