Canopy 400 Series AP and SM CAP and CSM Extend Video, Voice and Data Services into nlos and NLOS Environments

Transcription

1 Canopy 400 Series AP and SM CAP and CSM Extend Video, Voice and Data Services into nlos and NLOS Environments

2 Reach New Locations NLOS/nLOS Video Surveillance in metro areas High Throughput Enterprise Applications Extend Networks into Urban Areas Extend Networks into Areas with Foliage

3 Network Operator Benefits Enterprise Network Operators Municipal Network Operators Wireline Service Providers Wireless Service Providers Quickly build outdoor private network to connect islands of coverage Quickly extend video surveillance coverage areas Rapidly extend network into DSL Red areas Rapidly extend network into urban areas with foliage and obstructions Deliver Video, Voice and Data Connectivity to New Locations

4 Canopy 400 Series Advantages Feature nlos and NLOS coverage Increased Throughput Longer Range GPS Synchronization Simple Installation Benefit Expand broadband coverage into areas where foliage or obstructions limited wireless broadband deployment 21 Mbps of Total Aggregate throughput provides more capacity for video, voice and data applications LOS range 5 miles and beyond provides greater coverage from AP location, reducing the number of towers required Reduction in self interference enables the network to scale from small to large deployments. Access Points and Subscriber Modules can be deployed in hours, reducing the cost and delay of service Higher Performance with Canopy Reliability

5 Canopy 400 Series Specifications Typical Aggregate Throughput 21 Mbps Maximum Frequency Range UNII Channel Width 10 MHz Typical LOS Range Encryption Latency 5 mile (8 km) at lowest modulation DES 5-7 msec

6 Canopy 400 Series Elements Access Point Integrated or Connectorized Zero Footprint Four 90 degree sector configuration; N=2 Frequency Re-use (ABAB) Tower 84 Mbps Throughput Supports up to 200 SM s in a sector 27 dbm EIRP GPS synchronized Compatible with CMMmicro & CMM4, standard hardware, software, Prizm and CNUT Subscriber Module Integrated 17dBi antenna Power over Ethernet Simple Installation 27 dbm EIRP Compatible with existing power supplies, surge suppressors, brackets, software, Prizm and CNUT

7 Canopy 400 Series Performance 400 Series Canopy Modulation Throughput Range 64QAM(3/4) 21 Mbps 1.25 miles 16QAM(3/4) 14 Mbps 2.5 miles QPSK(3/4) 7 Mbps 5.0 miles Range is based on free-space. Throughput is per-sector aggregate throughput. All specifications are subject to change

8 Canopy 400 Series 21 Mbps Canopy 400 Series 14 Mbps Advantage Canopy 400 Series 7 Mbps Canopy Canopy 400 Series Miles

9 Canopy 400 Series Link Budget Calculation Data (5.4 GHz) Access Point Subscriber Module Receiver Sensitivity Integrated Access Point 1X: -89 dbm 2X: -78 dbm 3X: -70 dbm Subscriber Module 1X: -89 dbm 2X: -78 dbm 3X: -70 dbm Antenna Gain 17 dbi 17 dbi Transmit Power 10 dbm 10 dbm Fade Margin Customer Specific

10 Co-location with Existing Canopy Networks Canopy 400 Series products can co-exist with existing 5 GHz Canopy Networks GPS synchronization is essential to co-location and overlaying OFDM-based Canopy with traditional Canopy Co-locating 5.4 GHz 400 Series with Canopy (5.7 or 5.4) requires careful channel planning (recommend 5MHz guard band and 3 ft. vertical separation between OFDM and FSK channels; no guard band required between adjacent OFDM channels) Each environment is unique so co-location will require field experience to understand limitations Detailed co-location guidelines will be published in a Deployment Guide published on the Canopy web site.

11 Product Comparison Traditional Canopy 400 Series Canopy Throughput Near- / Non-Line-of-Sight Range Interference Immunity Network Reliability Security Ease of Deployment Power Consumption Higher Performance with Proven Canopy Reliability

12 Product List Prices Element Canopy 400 Series 5.4GHz Access Point (CAP54400) Radio Mechanical housing External 90 o 17dBi antenna Integrated tilt bracket Canopy 400 Series 5.4GHz Subscriber Module (CSM54400) Radio Integrated internal antenna Mechanical housing Part Number List Price 5440APAA $1, SMAA $3,495

13 Product Configuration - Accessories AP Antenna For spares or repair purposes Cluster Management Module (CMMmicro) Processor/Switch 30VDC power supply Mechanical Assembly for outdoor mounting GPS antenna and mounting bracket CMMmicro Power Supply CMMmicro 30VDC Power Supply for spares only SM Power Supply SM 29.5VDC Power Supply Surge Suppressors Canopy Surge Suppressor Subscriber Module Mounting Bracket Mounting bracket Optional pole-mount kit E CKDB (N. American linecord) 1070CK-02DB (no line cord) 1070CK-03DB (no power supply) ACPS112WA (N. American line cord) ACPS112W-02A (no line cord) ACPSSW-13B (N. America) 600SSB or 600SSC SMMB2A BH-1209A

14 Availability and Launch Key Remaining Milestones For Launch: FCC Certification for DFS Testing Complete Factory Pilot Builds Launch Activities: Marketing literature ready to go live upon launch Demo units at IWCE - Feb 27-29, 2008 Internal training for support organizations - mid Feb Customer training webinars - TBD Launch target is March

15 Rural Business Residential Multi-Unit Point-to- Point Metro Wireless Broadband with Purpose Motorola General Business Information, MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners. Motorola, Inc. 2007