SGM MHz, Video Driver with Y-C Mixer and Chroma Mute
|
|
- Brice Norton
- 6 years ago
- Views:
Transcription
1 26MHz, Video Driver with Y-C PRODUCT DESCRIPTION The SGM9140 is a low power, low voltage operation video amplifier with Y/C mixer and driver. SGM9140A is 12.4dB gain driver, and SGM9140B is 6.4dB gain driver. The SGM9140 has chroma mute and power save functions, and is suitable for energy saving products and any low power systems (digital camera, DVC and etc). The SGM9140 is available in Green MSOP- package. It operates over an ambient temperature range of -40 to 5. FEATURES Low Operating Voltage: 2.V to 5.5V Internal Y/C MIX Circuit Y-Input: Clamp C-Input: Bias Quiescent Current: 9mA at V CC =.0V (TYP) Operating Current at Power Save Mode 1μA at V CC =.0V (TYP) Support 6.4dB and 12.4dB Gains Available in Green MSOP- Package -40 C to 5 C Operating Temperature Range APPLICATIONS DVD Players Security Cameras Set-Top Boxes Portable Media Players Communication Device Digital Still Cameras REV. A. 2
2 PACKAGE/ORDERING INFORMATION MODEL ORDER NUMBER GAIN SETTING PACKAGE DESCRIPTION MARKING INFORMATION PACKAGE OPTION SGM9140A SGM9140AYMSG/TR 12.4 MSOP- SGM9140AYMS Tape and Reel, 000 SGM9140B SGM9140BYMSG/TR 6.4 MSOP- SGM9140BYMS Tape and Reel, 000 ABSOLUTE MAXIMUM RATINGS Supply Voltage, V CC...6V Storage Temperature Range to 150 Junction Temperature Operating Temperature Range to 5 Lead Temperature Range (Soldering 10 sec) ESD Susceptibility HBM...000V MM...400V NOTE: Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. CAUTION This integrated circuit can be damaged by ESD if you don t pay attention to ESD protection. SGMICRO recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications. SGMICRO reserves the right to make any change in circuit design, specification or other related things if necessary without notice at any time. Please contact SGMICRO sales office to get the latest datasheet. 2
3 PIN CONFIGURATION (TOP VIEW) YIN 1 CIN GND 2 CMUTE VOUT 6 PS SAG 4 5 V CC MSOP- PIN DESCRIPTION PIN NAME FUNCTION 1 YIN S-Video Signal Y Input. 2 GND Ground. VOUT Video Signal Output. 4 SAG SAG Correction Input. 5 VCC Power Supply. 6 PS Power Save. CMUTE C-mute Input. CIN S-Video Signal C Input.
4 ELECTRICAL CHARACTERISTICS (V CC = V, T A = 25, V OUT = 2V PP, R L = 150Ω connected to GND, referenced to 400kHz, unless otherwise noted.) PARAMETER CONDITIONS MIN TYP MAX UNITS Operating Voltage Range (V CC) V Quiescent Current (I Q) No Signal ma Power Save Mode Current (I S ) Power Save Mode μa Maximum Output Voltage (V OM) f = 1kHz, THD = 1% 2.4 V PP Voltage Gain (G V ) -0.1dB Bandwidth -1dB Bandwidth -db Bandwidth Frequency Characteristics (G f) SGM9140A SGM9140B SGM9140A 1 SGM9140B 16 SGM9140A 22 SGM9140B 20 SGM9140A 26 SGM9140B 2 Y IN = 10MHz/100kHz SGM9140A 0. SGM9140B 0.1 Differential Gain (DG) V CC = V, 4.4MHz 0.4 % Differential Phase (DP) V CC = V, 4.4MHz 0.2 deg Chroma Mute Crosstalk (CT) C IN = 4.4MHz, 0.1V PP -52 db Signal-to-Noise Ratio (SNR) (1) 100kHz to 5MHz 65 db Second Order Distortion (H V ) V OUT = 1.4V PP,.5MHz, SGM9140A -9 C IN = AC to GND and R L = SGM9140B Input Resistance Chroma Input 21 kω Mute Switch Change Voltage Power Save Switch Change Voltage VthMH 1.4 VthML 0.4 VthPH 1.4 VthPL 0.4 db MHz MHz MHz db db V V NOTES: 1. SNR = 20 log (14mV/rms noise); 2. Sine Video Signal. 40μs < t < 50μs 14mV PP 5mV PP 26mV PP 4
5 SGM9140 TYPICAL PERFORMANCE CHARACTERISTICS At V CC = 5V, T A = 25, R L = 150Ω, all outputs AC-coupled with 220μF, unless otherwise noted. Normalized Gain (db) SGM9140A Frequency Response Normalized Gain (db) SGM9140B Frequency Response Frequency (MHz) Frequency (MHz) -51 Crosstalk vs. Supply Voltage 14 Voltage Gain vs. Supply Voltage Crosstalk (db) SGM9140A SGM9140B Voltage Gain (db) SGM9140A SGM9140B Supply Voltage (V) Supply Voltage (V) 12 Quiescent Current vs. Supply Voltage Quiescent Current (ma) Supply Voltage (V) 5
6 CONTROL TERMINAL EXPLANATION PARAMETER STATUS NOTE Chroma Mute Power Save H L OPEN H L OPEN Chroma Mute: ON Chroma Mute: OFF Chroma Mute: OFF Power Save: OFF Power Save: ON Power Save: ON BLOCK DIAGRAM PS V CC 6 5 Vref. YIN 1 Disc. Clamp Ω VOUT CIN Bias 4 SAG Level shift 1 Level shift 2 CMUTE 2 GND 6
7 TYPICAL APPLICATION CIRCUITS YIN 1 CIN VIDEO OUT 100μF 22μF 2 SGM kΩ 10kΩ 4μF CMUTE To External Power Supply or Control I/O PS To External Power Supply or Control I/O V CC Application 1: V CC = 2.V to 5.5V, One Video Load YIN 1 CIN VIDEO OUT1 VIDEO OUT2 100μF 22μF 2 SGM kΩ 6 10kΩ 4 5 4μF CMUTE To External Power Supply or Control I/O PS To External Power Supply or Control I/O V CC Application 2: V CC = 2.V to 5.5V, Two Video Loads NOTES:. A 10kΩ resistor must be serially connected to CMUTE or PS pin. 4. Power supply V CC must be sequenced on first before input video signals.
8 PACKAGE OUTLINE DIMENSIONS MSOP- b E1 E 4. e RECOMMENDED LAND PATTERN (Unit: mm) D L A A1 A2 c θ Symbol Dimensions In Millimeters Dimensions In Inches MIN MAX MIN MAX A A A b c D E E e BSC BSC L θ
9 TAPE AND REEL INFORMATION REEL DIMENSIONS TAPE DIMENSIONS P2 P0 W Q1 Q2 Q1 Q2 Q1 Q2 B0 Q Q4 Q Q4 Q Q4 Reel Diameter P1 A0 K0 Reel Width (W1) DIRECTION OF FEED NOTE: The picture is only for reference. Please make the object as the standard. KEY PARAMETER LIST OF TAPE AND REEL Package Type Reel Diameter Reel Width W1 A0 B0 K0 P0 P1 P2 W Pin1 Quadrant MSOP Q1 9
10 CARTON BOX DIMENSIONS NOTE: The picture is only for reference. Please make the object as the standard. KEY PARAMETER LIST OF CARTON BOX Reel Type Length Width Height Pizza/Carton
SGM Channel, 6th-Order Video Filter Driver for SD/HD
PRODUCT DESCRIPTION The SGM9346 video filter is intended to replace passive LC filters and drivers with an integrated device. Six 6th-order Butterworth filters provide improved image quality compared to
More informationSGM mA, Ultra Low Dropout, Low Power, RF Linear Regulators
GENERAL DESCRIPTION The is a low-power, low-noise, low-dropout, CMOS linear voltage regulator that operates from a 2.5V to 5.5V input voltage. It is the perfect choice for low voltage, low power applications.
More informationSGM2022 Dual, Low Dropout, 250mA LDO Regulator
GENERAL DESCRIPTION The SGM2022 is a dual, low-power, low-dropout, CMOS linear voltage regulator. It operates from a 2.5V to 5.5V input voltage and delivers up to 250mA at each channel. The SGM2022 is
More informationSGM2031 Low Power, Low Dropout, RF - Linear Regulators
RF - Linear Regulators GENERAL DESCRIPTION The series low-power, low-dropout, CMOS linear voltage regulators operate from a 2.5V to 5.5V input voltage in an ultra small package. They are the perfect choice
More informationSGM2019 Low Power, Low Dropout, RF-Linear Regulators
GENERAL DESCRIPTION The SGM2019 series low-power, low-noise, low-dropout, CMOS linear voltage regulators operate from a 2.5V to 5.5V input voltage. They are the perfect choice for low voltage, low power
More informationSGM mA, Low Power, Low Dropout 3 -Terminal, Linear Regulators
3 -Terminal, Linear Regulators GENERAL DESCRIPTION The series low-power, low-noise, low-dropout, CMOS linear voltage regulators operate from a 2.5V to 5.5V input voltage. They are the perfect choice for
More informationSGM2032 Low Power, Low Dropout, RF Linear Regulators
GENERAL DESCRIPTION The SGM2032 series low power, low noise, low dropout, CMOS linear voltage regulators operate from a 2.5V to 5.5V input voltage. They are the perfect choice for low voltage, low power
More informationSGM2020 Low Power, Low Dropout, RF - Linear Regulators
GENERAL DESCRIPTION The series low-power, low-noise, low-dropout, CMOS linear voltage regulators operate from a 2.5V to 5.5V input voltage. They are the perfect choice for low voltage, low power applications.
More informationSGM803/SGM809/SGM810 Microprocessor Supervisory Circuit in 3-Pin SOT-23
GENERAL DESCRIPTION The supervisory circuits monitor the power supply voltage in microprocessor and digital systems. They provide a reset output during power-up, power-down and brownout conditions. On
More informationSGM2019 Low Power, Low Dropout, RF - Linear Regulators
GENERAL DESCRIPTION The SGM219 series low-power, low-noise, low-dropout, CMOS linear voltage regulators operate from a 2.5V to 5.5V input voltage. They are the perfect choice for low voltage, low power
More informationSGM803/SGM809/SGM810 Microprocessor Supervisory Circuit in 3-Pin SOT23
GENERAL DESCRIPTION The SGM803//SGM810 supervisory circuits monitor the power supply voltage in microprocessor and digital systems. They provide a reset output during power-up, power-down and brownout
More informationBCT mA Buck/Boost Charge Pump LED Driver
BCT3140 GENERAL DESCRIPTION The BCT3140 is a current-regulated charge pump ideal for powering high brightness LEDs for camera flash applications. The charge pump can be set to regulate two current levels
More informationWS3210C62 WS3210C62 Over-Voltage Protection Load Switch Descriptions CSP-9L (Bottom View) Pin Configuration (Top View)
Over-Voltage Protection Load Switch http://www.sh-willsemi.com Descriptions The features a low R ON internal High Voltage Switch and an input range of absolute maximum 30V. An internal input clamp is capable
More informationWS3210 WS3210. Over-Voltage Protection Load Switch. Descriptions. Features. Order information. Applications.
Over-Voltage Protection Load Switch http://www.sh-willsemi.com WS3210 Descriptions The WS3210 features a low internal High Voltage Switch and an input range of absolute maximum 30V. An internal input clamp
More informationRev 1.0. One-ch, Features. The. line outputt. removal of designed to. The. Capacitors. while reducing components. 6dB. for noise. The.
2rms Audio Line Driver with Integrated Onech, 6 th Order SD ideo Filter Features Line Output: able to drive 600ohm and 10kΩ 2rms With 3.3 Supply oltage No Pop/Clicks Noise at the line outputt when Power
More informationJC GENERAL DESCRIPTION FEATURES APPLICATIONS TYPICAL APPLIC PIN ASSIGNMENT. 300mA, Low Consumption, Low Dropout, CMOS LDO
GENERAL DESCRIPTION The series arelowdropout linear regulators and optimized to provide a high performance solution for battery power system to delivery low quiescent current. The device offer a new level
More informationA8241. AiT Semiconductor Inc. APPLICATION ORDERING INFORMATION. Low 60mV Dropout at 20mA 4% LED Current Matching
DESCRIPTION The is a CMOS based White/Blue LED driver with stand-alone capability. The driver is primarily designed for LED backlighting of LCD display powered by Li-ion battery with its high efficiency,
More informationOmnidirectional Microphone with Bottom Port and Analog Output ADMP401
FEATURES 4.72 mm 3.76 mm 1.0 mm surface-mount package High SNR of 62 dba Sensitivity of 42 dbv Flat frequency response from 100 Hz to 15 khz Low current consumption of
More informationDIO5151B 700mA/1A Buck/Boost Charge Pump LED Driver
Rev 0.1 Features Output Current : DIO5151BED8: 700mA DIO5151BCD10: 1A Up to 90% Efficiency in Torch Mode Adjustable FLASH Mode Current 1 and 2 Automatic Modes for High Efficiency Input Voltage Range: 3V
More informationXRD87L85 Low-Voltage CMOS 8-Bit High-Speed Analog-to-Digital Converter
Low-Voltage CMOS 8-Bit High-Speed Analog-to-Digital Converter April 2002-1 FEATURES 8-Bit Resolution Up to 10 MHz Sampling Rate Internal S/H Function Single Supply: 3.3V VIN DC Range: 0V to V DD VREF DC
More information2:1 MULTIPLEXER CHIP FOR PCI-EXPRESS ICS Description. Features. Block Diagram DATASHEET
DATASHEET 2:1 MULTIPLEXER CHIP FOR PCI-EXPRESS ICS557-08 Description The ICS557-08 is a 2:1 multiplexer chip that allows the user to select one of the two HCSL (Host Clock Signal Level) or LVDS input pairs
More informationStereo PDM-to-I 2 S or TDM Conversion IC ADAU7002
Data Sheet FEATURES 64 decimation of a stereo pulse density modulation (PDM) bit stream to pulse code modulation (PCM) audio data Slave I 2 S or time division multiplexed (TDM) output interface Configurable
More informationVM1000 Low Noise Bottom Port Analog Single-Ended Piezoelectric MEMS Microphone
GENERAL DESCRIPTION Vesper presents the world s first piezoelectric MEMS microphone. The provides superior performance and quality in all environments. The is a low noise, high dynamic range, single-ended
More information2.5 V/3.3 V, 2-Bit, Individual Control Level Translator Bus Switch ADG3243
2.5 V/3.3 V, 2-Bit, Individual Control Level Translator Bus Switch ADG3243 FEATURES 225 ps Propagation Delay through the Switch 4.5 Switch Connection between Ports Data Rate 1.5 Gbps 2.5 V/3.3 V Supply
More informationSY89645L. General Description. Features. Block Diagram. Applications. Markets. Precision Low Skew, 1-to-4 LVCMOS/LVTTL-to-LVDS Fanout Buffer
Precision Low Skew, 1-to-4 LVCMOS/LVTTL-to-LVDS Fanout Buffer General Description The is a 3.3V, fully differential, low skew, 1:4 LVDS fanout buffer that accepts LVTTL or LVCMOS inputs. It is capable
More informationCW211 Specification High-Speed USB2.0(480Mbps)DPDT Switch
CW211 Specification High-Speed USB2.0(480Mbps)DPDT Switch Chipwiser Technology Co.Ltd Copyright@2009,Chipwiser Technology Co.Ltd All right reserved Chipwiser Technology 1/9 GENERAL DESCRIPTION CW211 is
More informationDIO V Current Limited Load Switch
Rev 1.0 DIO7527 Features Input voltage range: 2.7V to 5.5V 2A Maximum Load Current 70mΩ typical R DS(ON) 70μA quiescent current Under-Voltage Lockout High precision over current trigger point Open-drain
More information2:1 MULTIPLEXER CHIP FOR PCI-EXPRESS ICS Features
DATASHEET 2:1 MULTIPLEXER CHIP FOR PCI-EXPRESS ICS557-08 Description The ICS557-08 is a 2:1 multiplexer chip that allows the user to select one of the two HCSL (Host Clock Signal Level) input pairs and
More informationXRD8775 CMOS 8-Bit High Speed Analog-to-Digital Converter
CMOS 8-Bit High Speed Analog-to-Digital Converter April 2002-4 FEATURES 8-Bit Resolution Up to 20MHz Sampling Rate Internal S/H Function Single Supply: 5V V IN DC Range: 0V to V DD V REF DC Range: 1V to
More information2.5 V/3.3 V, 1-Bit, 2-Port Level Translator Bus Switch in SOT-66 ADG3241
2. V/3.3 V, -Bit, 2-Port Level Translator Bus Switch in SOT-66 ADG324 FEATURES FUNCTIONAL BLOCK DIAGRAM 22 ps propagation delay through the switch A B 4. Ω switch connection between ports Data rate. Gbps
More information2.5 V/3.3 V, 2-Bit Common Control Level Translator Bus Switch ADG3242
2.5 V/3.3 V, 2-Bit Common Control Level Translator Bus Switch ADG3242 FEATURES 225 ps propagation delay through the switch 4.5 Ω switch connection between ports Data rate 1.5 Gbps 2.5 V/3.3 V supply operation
More informationFeatures. Applications
3.3V Ultra-Precision 1:4 LVDS Fanout Buffer/Translator with Internal Termination General Description The is a 3.3V, high-speed 2GHz differential low voltage differential swing (LVDS) 1:4 fanout buffer
More informationFeatures. Applications
6GHz, 1:4 CML Fanout Buffer/Translator with Internal I/O Termination General Description The is a 2.5V/3.3V precision, high-speed, fully differential 1:4 CML fanout buffer. Optimized to provide four identical
More informationACE24AC128 Two-wire Serial EEPROM
Description The ACE24AC128 series are 131,072 bits of serial Electrical Erasable and Programmable Read Only Memory, commonly known as EEPROM. They are organized as 16,384 words of 8 bits (one byte) each.
More informationICS548A-03 LOW SKEW CLOCK INVERTER AND DIVIDER. Description. Features. Block Diagram DATASHEET
DATASHEET ICS548A-03 Description The ICS548A-03 is a low cost, low skew, high-performance general purpose clock designed to produce a set of one output clock, one inverted output clock, and one clock divided-by-two.
More information300mA, Low Power, Low Dropout, 3 -Terminal, Linear Regulators
3mA, Low Power, Low Dropout, 3 -Terminal, Linear Regulators GENERAL DESCRIPTION FEATURES The low-power, low-dropout, CMOS linear voltage regulators operate from a 2.5V to 5.5V input and deliver up to 3mA.
More informationFeatures. Applications
2.5/3.3V 1-to-1 Differential to LVCMOS/LVTTL Translator Precision Edge General Description Micrel s is a 1-to-1, differential-to-lvcmos / LVTTL translator. The differential input is highly flexible and
More informationSRV05-4L. Ultra Low Capacitance Array for ESD Protection. Features. Description. Main applications. Protection solution to meet. Ordering Information
Ultra Low Capacitance Array for ESD Protection Description The provides a typical line to line capacitance of 0.80pF and low insertion loss up to 3GHz providing greater signal integrity making it ideally
More informationTVS Diode Arrays (SPA Diodes) SP1005 Series 30pF 30kV Bidirectional Discrete TVS. General Purpose ESD Protection - SP1005 Series Flipchip SOD882
SP1005 Series 30pF 30kV Bidirectional Discrete TVS RoHS Pb GREEN Description The SP1005 includes back-to-back Zener diodes fabricated in a proprietary silicon avalanche technology to provide protection
More informationSP1050 Series for Power-over-Ethernet PSE Protection
SP1050 Series for Power-over-Ethernet PSE Protection RoHS Pb GREEN Description The SP1050-04BTG provides over-voltage protection for Power-over-Ethernet PSE equipment in a space saving SOIC-8 package.
More informationACE24AC64 Two-wire Serial EEPROM
Description The ACE24AC64 series are 65,536 bits of serial Electrical Erasable and Programmable Read Only Memory, commonly known as EEPROM. They are organized as 8192 words of 8 bits (one byte) each. The
More information1A Ultra Low Dropout Linear Regulator
General Description The is a low dropout three-terminal regulator with a typical dropout of 0.28V at 1A output current. The provides current limit and thermal shutdown. On-chip thermal shutdown provides
More informationACE24AC02A1 Two-wire Serial EEPROM
Description The ACE24AC02A1 is 2048 bits of serial Electrical Erasable and Programmable Read Only Memory, commonly known as EEPROM. They are organized as 256 words of 8 bits (1 byte) each. The devices
More informationSP5001 Series 4 Channel TVS Common Mode Filter
Low Capacitance ESD Protection - SP51 Series SP51 Series 4 Channel TVS Common Mode Filter RoHS Pb GREEN Description The SP51 Series is a highly integrated Common Mode Filter (CMF providing both ESD protection
More information2.5 V/3.3 V, 16-Bit, 2-Port Level Translating, Bus Switch ADG3247
V/3.3 V, 16-Bit, 2-Port Level Translating, Bus Switch FEATURES 225 ps Propagation Delay through the Switch 4.5 Switch Connection between Ports Data Rate 1.244 Gbps V/3.3 V Supply Operation Selectable Level
More informationPreamplifier Circuit for IR Remote Control
Preamplifier Circuit for IR Remote Control FEATURES Carrier-out-function: carrier frequency and burst length accurately correspond to the input signal Small QFN package with 2 mm width Can be used with
More information2 TO 4 DIFFERENTIAL CLOCK MUX ICS Features
DATASHEET 2 TO 4 DIFFERENTIAL CLOCK MUX ICS557-06 Description The ICS557-06 is a two to four differential clock mux designed for use in PCI-Express applications. The device selects one of the two differential
More informationA79LXX BIPOLAR LINEAR REGULATOR THREE TERMINAL NEGATIVE VOLTAGE REGULATOR
DESCRIPTION Three-terminal negative voltage regulator. FEATURES Maximum Output current IOM: 100mA Output voltage VO: -/-6V/-8V/-9V/-12V The is available in SOT-23 and TO-92 Packages. Continuous total dissipation
More informationSP5001 Series 4 Channel Common Mode Filter with ESD Protection
Low Capacitance ESD Protection - SP51 Series SP51 Series 4 Channel Common Mode Filter with ESD Protection RoHS Pb GREEN Description The SP51 Series is a highly integrated Common Mode Filter (CMF) providing
More information2.5 V/3.3 V, 8-Bit, 2-Port Level Translating, Bus Switch ADG3245
V/3.3 V, 8-Bit, 2-Port Level Translating, Bus Switch ADG3245 FEATURES 225 ps Propagation Delay through the Switch 4.5 Switch Connection between Ports Data Rate 1.244 Gbps V/3.3 V Supply Operation Selectable
More informationFeatures. Applications
Ultra-Precision 1:8 CML Fanout Buffer with Internal I/O Termination General Description The is a 2.5V/3.3V precision, high-speed, fully differential CML 1:8 fanout buffer. The is optimized to provide eight
More informationAOZ8900. Ultra-Low Capacitance TVS Diode Array PRELIMINARY. Features. General Description. Applications. Typical Application
Ultra-Low Capacitance TS Diode Array General Description The is a transient voltage suppressor array designed to protect high speed data lines from Electro Static Discharge (ESD) and lightning. This device
More information4-Channel 1-wire Dimming LED Driver with Ultra Low Dropout Current Source
4-Channel 1-wire Dimming LED Driver with Ultra Low Dropout Current Source FEATURES DESCRITION Ultra low dropout: 50mV/20mA(typical) Support up to 4 LEDs LED sink current up to 20mA ±1% LED current matching(typical)
More informationCraft Port Tiny RS-232 Transceiver for Portable Applications ADM101E. Data Sheet FUNCTIONAL BLOCK DIAGRAM
Data Sheet FEATURES 460 kbit/s Transmission Rate Single 5 V Power Supply Compatible with RS-232 Input/Output Levels 0.1 μf Charge Pump Capacitors One Driver and One Receiver On-Board DC-DC Converter ±4.2
More informationStereo Audio Volume Control
PGA2310 Stereo Audio Volume Control FEATURES DIGITALLY CONTROLLED ANALOG VOLUME CONTROL Two Independent Audio Channels Serial Control Interface Zero Crossing Detection Mute Function WIDE GAIN AND ATTENUATION
More informationUM3221E/UM3222E/UM3232E
General Description UM3221E/UM3222E/UM3232E Fail-Safe, Single Supply RS-232 Transceivers UM3221E/UM3222E/UM3232E The UM3221E/UM3222E/UM3232E series are 3.3V powered RS-232 transceivers intended for portable
More informationTVS Diode Arrays (SPA Diodes)
SP1005 Series 30pF 30kV Bidirectional Discrete TVS RoHS Pb GREEN Description The SP1005 includes back-to-back Zener diodes fabricated in a proprietary silicon avalanche technology to provide protection
More informationHX4002 HX1001. White LED Backlighting Li-Ion Battery Backup Supplies Local 3V to 5V Conversion Smart Card Readers PCMCIA Local 5V Supplies
HX1001 Low Noise, Regulated Charge Pump DC/DC Converter Features Fixed 5V±4% Output VIN Range: 2.7V ~ 5V Output Current: up to 250mA (V IN =4.5V) Low Noise Constant Frequency Operation Shutdown Current:
More information1.8 V, 12-LVDS/24-CMOS Output, Low Power Clock Fanout Buffer ADCLK854
.8 V, 2-LVDS/24-CMOS Output, Low Power Clock Fanout Buffer AD854 FEATURES 2 selectable differential inputs Selectable LVDS/CMOS outputs Up to 2 LVDS (.2 GHz) or 24 CMOS (250 MHz) outputs
More informationSTEF12E. Electronic fuse for 12 V line. Datasheet. Features. Applications. Description
Datasheet Electronic fuse for 12 V line Features DFN10 (3x3 mm) Continuous current typ. 3.6 A N-channel on-resistance typ. 45 mω Enable/fault functions Output clamp voltage typ. 15 V Undervoltage lockout
More informationMIC5281. Features. General Description. Applications. Typical Application. 120V IN, 25mA, Ultra-Low IQ, High-PSRR Linear Regulator
120V IN, 25mA, Ultra-Low IQ, High-PSRR Linear Regulator General Description The high-performance linear regulator offers a very-wide input operating voltage range, up to 120V DC, and supplies an output
More informationEVALUATION KIT AVAILABLE High-Bandwidth, VGA 2:1 Switch with ±15kV ESD Protection
19-5; Rev ; 1/9 EVALUATION KIT AVAILABLE High-Bandwidth, VGA :1 Switch General Description The integrates high-bandwidth analog switches, level-translating buffers, and level-translating FET switches to
More informationAOZ8809ADI. Ultra-Low Capacitance TVS Diode. Features. General Description. Applications. Typical Applications
Ultra-Low Capacitance TVS Diode General Description The AOZ889ADI is a transient voltage suppressor array designed to protect high speed data lines such as HDMI 1.4/2., USB 3./3.1, MDDI, SATA, and Gigabit
More informationA4732 DPDT ANALOG SWITCH LOW-POWER, TWO-PORT, HIGH-SPEED, USB2.0 (480Mbps)
DESCRIPTION The is a Low-Power, Two-Port, High-Speed, USB2.0 (480Mbps) double pole double-throw (DPDT) Analog Switch featuring an On-Resistance of 4.5 ohm at VCC=3V and a Low On Capacitance 3.7pf Typical.
More informationWE05R. Features. Transient Voltage Suppressor IEC COMPATIBILITY (EN ) SOT-143 (Top View) Document: W , Rev: A
Document: W0005, Rev: A Transient Voltage Suppressor Features 00Watts Peak Power per Line (tp = 8/0μs) Protects two I/O lines Low operating voltage: 5V Ultra Low capacitance(
More informationLow-Noise Bottom Port Piezoelectric MEMS Microphone
Low-Noise Bottom Port Piezoelectric MEMS Microphone Data Sheet PMM-3738-VM1000-R PUI Audio, featuring Vesper s exclusive technology, presents the world s first and only piezoelectric MEMS microphone. The
More informationUNISONIC TECHNOLOGIES CO., LTD URCZ1284-XX
UNISONIC TECHNOLOGIES CO., LTD URCZ1284-XX PARALLEL PORT SINGLE TERMINATION NETWORK WITH ±15KV ESD PROTECTION DESCRIPTION The UTC URCZ1284-XX is a high-speed parallel port single termination.here is two
More informationPI6C557-01BQ. PCIe 3.0 Clock Generator with 1 HCSL Outputs. Features. Description. Pin Configuration (16-Pin TQFN) Block Diagram
s Features ÎÎPCIe 3.0 compliant à à Phase jitter - 0.45ps RMS (High Freq. Typ.) ÎÎLVDS compatible output ÎÎSupply voltage of 3.3V ±10% ÎÎ25MHz crystal or clock input frequency ÎÎHCSL outputs, 0.8V Current
More informationZLED7002. Toggle (Side-Step) Dual-Channel LED Driver. Datasheet. Features. Brief Description. Benefits. Available Support. Physical Characteristics
Toggle (Side-Step) Dual-Channel LED Driver ZLED7002 Datasheet Brief Description The ZLED7002 toggle (side-step) dual-channel LED driver is one of our ZLED family of LED control ICs. It operates in the
More information2.5V, 3.2Gbps, DIFFERENTIAL 4:1 LVDS MULTIPLEXER WITH INTERNAL INPUT TERMINATION
2.5V, 3.2Gbps, DIFFERENTIAL 4:1 LVDS MULTIPLEXER WITH TERNAL PUT TERMATION FEATURES Selects among four differential inputs Guaranteed AC performance over temp and voltage: DC-to > 3.2Gbps data rate throughput
More informationUM Pin Microprocessor Reset Circuits UM803 SOT323/SOT23-3. General Description. Applications. Features
General Description UM803 3-Pin Microprocessor Reset Circuits UM803 SOT323/SOT23-3 The UM803 is a microprocessor (μp) supervisory circuit used to monitor the power supplies in μp and digital systems. It
More informationMAX9650/MAX9651 High-Current VCOM Drive Op Amps for TFT LCDs
General Description The MAX965/MAX9651 are single- and dual-channel VCOM amplifiers with rail-to-rail inputs and outputs. The MAX965/MAX9651 can drive up to 13mA of peak current per channel and operate
More informationCorrelated Double Sampler (CDS) AD9823
Correlated Double Sampler (CDS) AD9823 FEATURES 40 MHz correlated double sampler (CDS) Fixed 3.5 db CDS gain Low noise optical black clamp circuit 3 V single-supply operation 4-lead TSSOP package CCDIN
More informationSP2574NUTG 2.5V 40A Diode Array
TVS Diode Arrays (SPA Diodes 2.5V 40A Diode Array RoHS Pb GREEN Description The is a low-capacitance, TVS Diode Array designed to provide protection against ESD (electrostatic discharge, CDE (cable discharge
More informationF USB Charger Controller F Release Date: Dec., 2011 Version: V0.11P. Nov., 2011 Data Sheet
USB Charger Controller Release Date: Dec., 2011 Version: V0.11P F75204 Datasheet Revision History Version Date Page Revision History Data Brief 2011/10 - Data Brief 0.10P 2011/ 11 Up Date AC/DC SPECs 0.11P
More informationMAS6240 Piezo Driver with Multi-Mode Charge Pump
MAS624 Piezo Driver with Multi-Mode Charge Pump Both Single Ended and Differential Output Three-Step Volume Adjusting Up to 8Vpp Output from 3V Supply One Wire Audio & Shutdown Control High Efficiency
More informationYB1300S Switched Capacitor Boost Converter 5V/4.5V
Description The YB1300S is a switched capacitor DC/DC boost converter that produces a regulated 5V output. The input voltage range is from 2.7V to 5.0V that makes the YB1300S ideally for a single cell
More informationA6150 LOW DROPOUT VOLTAGE REGULATOR 150mA CMOS LOW NOISE
DESCRIPTION The series of fixed output low dropout linear regulators are designed for portable battery powered applications which require low noise operation, fast enable response time, and low dropout.
More information2 AA Cell to 3.3V USB On-The-Go Devices White LED Drivers Handheld Devices. The HM3200B is available in the 6-pin SOT23-6.
Low Noise, Regulated Charge Pump DC/DC Converter Features Fixed 3.3V ± 4% Output VIN Range: 1.8V to 5V Output Current: 100mA Constant Frequency Operation at All Loads Low Noise Constant Frequency (1.2MHz)
More informationUNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD MICROPROCESSOR IC DESCRIPTION The UTC UTC812 is a microprocessor (µp) reset circuit designed to monitor the power supplies in µp and digital systems. The UTC UTC812 has push-pull
More information1.5A Ultra Low Dropout Linear Regulator CL39150
General Description The CL39150 is a low dropout three-terminal regulator with a typical dropout of 375mV at 1.5A output current. The CL39150 provides current limit and thermal shutdown. On-chip thermal
More informationFeatures VCC MIC1810 RESET RESET
Microprocessor Reset Circuit General Description The is an inexpensive microprocessor supervisory circuit that monitors power supplies in microprocessor based systems. The function of these devices is
More information3.3V 1GHz PRECISION 1:22 LVDS FANOUT BUFFER/TRANSLATOR WITH 2:1 INPUT MUX
3.3V 1GHz PRECISION 1:22 LVDS FANOUT BUFFER/TRANSLATOR WITH 2:1 INPUT MUX FEATURES High-performance, 1GHz LVDS fanout buffer/ translator 22 differential LVDS output pairs Guaranteed AC parameters over
More informationMIC5282. General Description. Features. Applications. Typical Applications. 120V IN, 50mA, Ultra-Low I Q, High-PSRR Linear Regulator
12V IN, 5mA, Ultra-Low I Q, High-PSRR Linear Regulator General Description The high-performance linear regulator offers a very-wide input operating voltage range, up to 12V DC, and supplies an output current
More informationHM9708 HM9708. Battery-Powered Equipment Motherboard USB Power Switch USB Device Power Switch Hot-Plug Power Supplies Battery-Charger Circuits DC+ VIN
200mΩ Power Distribution Switches Features 200mΩ Typ. High-Side MOSFET 0.8A Current Limit (V IN =3.0V) Wide Input Voltage Range: 2V ~ 5.5V Soft Start Thermal Protection Small SOT-23-5 Package Minimizes
More information3.3V, 2.0GHz ANY DIFF. IN-TO-LVDS PROGRAMMABLE CLOCK DIVIDER FANOUT BUFFER W/ INTERNAL TERMINATION
3.3V, 2.0GHz ANY DIFF. -TO-LVDS PROGRAMMABLE CLOCK DIVIDER FANOUT BUFFER W/ TERNAL TERMATION FEATURES Guaranteed AC performance > 2.0GHz f MAX output toggle > 3.0GHz f MAX input < 800ps t PD (matched-delay
More informationDUAL TTL-to-DIFFERENTIAL PECL TRANSLATOR
DUAL TTL-to-DIFFERENTIAL PECL TRANSLATOR FEATURES DESCRIPTION 300ps typical propagation delay
More informationAOZ8204. Four-line TVS Diode Array. Features. General Description. Applications
AOZ80 Four-line TS Diode Array General Description The AOZ80 is a transient voltage suppressor diode array designed to protect data lines from high transient conditions and SD. This state-of-the-art device
More informationCEP8120 Rev 1.0, March, 2015
USB Dedicated Charging Port Controller FEATURES Supports USB DCP Shorting D+ Line to D Line per USB Battery Charging Specification, Revision 1.2 (BC1.2) Supports Shorted Mode (Shorting D+ Line to D- Line)
More information3.3V, 3.2Gbps DIFFERENTIAL 4:1 LVDS MULTIPLEXER with INTERNAL INPUT TERMINATION
3.3V, 3.2Gbps DIFFERENTIAL 4:1 LVDS MULTIPLEXER with TERNAL PUT TERMATION FEATURES Selects among four differential inputs Guaranteed AC performance over temp and voltage: DC-to > 3.2Gbps data rate throughput
More informationACE24AC16B Two-wire Serial EEPROM
Description The ACE24AC16B is 16,384 bits of serial Electrical Erasable and Programmable Read Only Memory, commonly known as EEPROM. They are organized as 2,048 words of 8 bits (1 byte) each. The devices
More informationMAX14653/MAX14654/ MAX14655/MAX High-Current Overvoltage Protectors with Adjustable OVLO
EVALUATION KIT AVAILABLE MAX14653/MAX14654/ General Description The MAX14653/MAX14654/ overvoltage protection devices feature a low 38mΩ (typ) R ON internal FET and protect low-voltage systems against
More informationAOZ8101. Ultra-Low Capacitance TVS Diode Array. General Description. Features. Applications. Typical Application
Ultra-Low Capacitance TS Diode Array General Description The AOZ8101 is a transient voltage suppressor array designed to protect high speed data lines from Electro Static Discharge (ESD) and lightning.
More informationEnhanced 1:2 VGA Mux with Monitor Detection and Priority Port Logic
EVALUATION KIT AVAILABLE MAX14983E General Description The MAX14983E integrates high-bandwidth analog switches, level-translating buffers, and 5V power switches to implement a complete 1: multiplexer for
More informationACE803ND 3-Pin Microprocessor Reset Circuits
Description ACE803ND The ACE803ND is a microprocessor (μp) supervisory circuit used to monitor the power supplies in μp and digital systems. It provides excellent circuit reliability and low cost by eliminating
More informationPI2PCIE2214. PCI Express 2.0, 1-lane, 4:1 Mux/DeMux Switch. Features. Description. Application. Pin Description. Block Diagram.
Features 2 Differential Channel, 4:1 Mux/DeMux PCI Express 2.0 performance, 5.0 Gbps Low Bit-to-Bit Skew, 7ps Max. Low Crosstalk: -23dB@3GHz Low Off Isolation: -23dB@3GHz Operating Range: 1.8V ±10% ESD
More informationMP201 Dying Gasp Storage and Release Control IC
The Future of Analog IC Technology MP201 Dying Gasp Storage and Release Control IC DESCRIPTION The MP201 is a dying gasp storage and release controller. It charges storage capacitor from the input during
More information1000 Base-T, ±15kV ESD Protection LAN Switches
19-0624; Rev 0; 8/06 1000 Base-T, ±15kV ESD Protection LAN Switches General Description The meet the needs of high-speed differential switching. The devices handle the needs of Gigabit Ethernet (10/100/1000)
More information0504A PESDR0504S2. 4-Line Low Capacitance TVS Diode Array. Mechanical Characteristics. Description. Applications. Features. Marking Information
4-Line Low Capacitance TVS Diode Array Description The is a low capacitance TVS array, utilizing leading monolithic silicon technology to provide fast response time and low ESD clamping voltage, making
More informationApplications +5V V CC V S EN SYNCH0, SYNCV0 SDA0, SCL0 RED SYNCH1, SYNCV1 SDA1, SCL1 MAX14895E BLU GND
19-5819; Rev ; 3/11 E V A L U A T I O N K I T A V A I L A B L E MAX14895E General Description The MAX14895E integrates level-translating buffers and features RED, GRN, and BLU (RGB) port protection for
More information