Setup Guide. KD-CATHD500Pro. HDBT/HDMI via Single CAT6/STP (Tx/Rx) Extenders with EDID Control, RS-232, IR, HDMI Pass-through and Ethernet

Transcription

1 Rev 0 May 2013 Key Digital, led by digital video pioneer Mike Tsinberg, develops and manufactures high quality, cutting-edge technology solutions for virtually all applications where high quality video imaging is important. Key Digital is at the forefront of the video industry for Home Theater Retailers, Custom Installers, System Integrators, Broadcasters, Manufacturers, and Consumers. HDBT/ via Single (Tx/Rx) Extenders with EDID Control, RS-232, IR, Pass-through and Ethernet Setup Guide Key Digital Systems :: 521 East 3rd Street :: Mount Vernon, NY The Experts in Digital Video Technology and Solutions Phone : Fax : Web :

2 4 1 Table of Contents About... 1 Connections... 2 Extending Ethernet, IR and RS-232 Control... 4 Application Example... 5 Settings Specifications... 8 Important Product Warnings Safety Instructions How to Contact Key Digital Warranty cabling is required. All included specifications are based on the use of CAT6 STP with properly shielded RJ45 connectors You MUST use the Power Supply provided with your unit or you VOID the Key Digital Warranty and risk damage to your unit and associated equipment. About Description HDBT/ (Tx/Rx) Extenders extend 1080p/60, 1920x1200, 3D signals up to 400 ft. via single Key Digital KD-CAT6STP1X Super CAT6 Shielded cable, or up to 300 ft. using a single third-party CAT6 shielded cable. carries IR and RS-232 for controlling remotely located equipment. Ethernet ports allow 10/100 LAN Network extension. Key Features Auto-adjustment of feedback, equalization and amplification depending on the length of cabling used Internal EDID Library features 10 default EDID configurations including native EDID data from any Output/Display Features both Transmit and Receive IR, RS-232 and Ethernet for bi-directional control signals Full support for 12-Bit Deep Color Video Supports lossless compressed digital audio: Dolby TrueHD, Dolby Digital Plus and DTS -HD Master Audio Key Benefits, IR, RS-232 and Ethernet signals combined over a single pass-through port on Tx Balun connects additional devices up to 20 ft. Daisy chaining of Tx and Rx units allows almost unlimited extension of, RS-232, IR and Ethernet signals Supports HDBaseT Technology Advanced Features 3D Capability to pass 3D stereoscopic signal formats Accessories (2) 5V 2A DC Power Supplies (2) Mounting Brackets (3) Locking Cable Clips (1) Grounding Wire Please read all instructions to insure safe operation of the product Key Digital, Inc. All rights reserved.

3 2 3 Connections Before making any connections, power off your source and display devices. Tx Balun: Using a short cable, connect your source device to the port labeled Input. To connect DVI, use appropriate DVI to adapters. Additionally you may connect a 10/100 Ethernet LAN cable to the TCP/IP port and an RS-232 cable to the DB9 port to transmit RS-232 signals. Connect the CAT6 STP cable that connects to the Rx Balun at the port labeled CAT6 STP Output. Rx Balun: Using a short cable, connect your display device to the port labeled Output. You may use the port labeled Pass-Through to connect (up to 20 ft.) your AVR, display or other device to the Tx unit. Connect the CAT6 STP cable at the port labeled CAT6 STP Input. If desired, you may connect your IR signals to send (port labeled Tx), or receive (port labeled Rx).

4 4 5 If you are using IR, connect it at this time. For Ethernet, connect the cable to TCP/IP RJ45 port. Some 3.5mm Male plugs feature a plastic sleeve that extends longer than an average sleeve. This may cause poor grounding contact. See the example to the right of a sleeve that may cause poor contact. Application Example If you are using RS-232, connect to the RS-232 port. Ethernet LAN Pass-through Blu-Ray /DVI* Display IR Emitter IR Tx IR Receiver (to control TV) Power up the Baluns using the included power supplies and then power up your source and display equipment. IR Rx Extending Ethernet, IR and RS-232 Control TV Remote KD-IRKIT300 Ethernet IR Ethernet The can transmit standard 10/100BaseT LAN data. You can use TIA 568B standards for termination. RS-232 You can use the to send RS-232 commands for controlling remote equipment. Requires the use of a null-modem cable on one (either) side. IR You may transmit IR information in either direction. The IR input can be from a dedicated control system or a standard distribution block s emitter outputs. Use a fixed 5v input signal with a 3.5mm mono mini jack. The sleeve of the 3.5mm Male connector must have good physical contact with 3.5 mm Female input/output on the. Up to 400 with Key Digital KD-CAT6STP1X Up to 300 with 3rd Party IR Rx Ethernet LAN Display IR Emitter IR Tx IR Receiver (to control DVD) KD-IRKIT300 Blu Ray Remote Blu-Ray

5 KD-IRKIT300 Blu Ray Remote 6 7 Daisy Chain Example: Blu-Ray Settings 20 EDID Control EDID adjustments may be necessary when connecting to or from an AV Receiver, or for passing 3D content derived from a Cable or Satellite source. They can also speed up the switching process from Cable or Satellite. The possible EDID settings can range from 0 to 9 ( 0 is the default). 0 EDID from connected display i w/ PCM 2ch Digital Audio i w/ HD Audio 20 Achieved Distance: up to 860 Up to 400 with Key Digital KD-CAT6STP1X 20 Display The EDID controls are located on the Tx Balun. To change EDID settings, use a small flat bladed screwdriver to turn the rotary switch to the desired EDID number. The switch has click positions to make sure the arrow is pointing at a number and not in-between. There is no need to power the unit off when adjusting the EDID settings. The unit will automatically renegotiate the new handshake in a few seconds. Please follow this procedure for subsequent EDID changes. When selecting an EDID from the library, your source device will see the KD- CATHD500Pro EDID choice instead of the display s EDID, overriding the display s EDID information. If your display is not capable of accepting the video resolution or audio type selected, you may not see a picture or hear sound. In this case please choose another more compatible EDID, or use the default EDID. Range and Resolution: w/ KD-CAT6STP1X Super CAT6 Shielded cabling: All resolutions up to 1080p, 1920x1200, 3D up to 400ft w/ Third-Party cabling: All resolutions up to 1080p, 1920x1200, 3D up to 300ft NOTE: Use metal shielded RJ45 connectors with soldered ground wires when terminating the CAT6 STP. Key Digital SKU: KD-RJ45SC p w/ PCM 2ch Digital Audio p w/ HD Audio 5 3D w/ PCM 2ch Digital Audio 6 3D w/ Dolby Audio 7 3D w/ HD Audio 8 DVI 1080p (no audio) Rotary EDID Control Switch 9 DVI 1080p with Forced HPD (no audio)

6 8 9 Firmware Updates: The Tx and Rx have an Upgrade Mode switch located near the RS- 232 port. The 2 position slide switch is marked Normal and Program. This switch should only be used in the Program position when updating unit s firmware. Be sure the switch is in the Normal mode for standard operation. Specifications Technical: Inputs Tx (Each): 1, 1 Serial IR Rx, 1 RS-232, 1 TCP/IP Outputs Tx (Each): 1 CAT6 STP, 1 pass-through, 1 Serial IR Tx Inputs Rx (Each): 1 CAT6 STP, 1 Serial IR Rx Outputs Rx (Each): 1, 1 Serial IR Tx, 1 TCP/IP, 1 RS-232 and HDCP Licensing: Fully licensed and compatible with all and HDCP techologies Link and Range: 1080p/60, 1920x1200, 1080i/60, 720p, 1080p/24; up to 400ft when used with KD-CAT6STP1X cabling, 300ft when used with third-party cabling. Lossless Compressed Digital Audio Support: Dolby TrueHD, Dolby Digital Plus and DTS -HD Master Audio DDC Signal (Data): Input DDC Signal: 5 Volts p-p (TTL) Video/Audio Signal: Input Video Signal: 1.2 Volts p-p Connector: Type A, 19 Pin Female RJ45 Connector: Shielded Link Connector Ethernet RJ45 Connector: Shielded TCP/IP 10/100 BaseT IR Connector: 3.5 mm monaural mini jack RS-232 Connector: D-Sub 9 Pin I2C Communication: EDID and HDCP bi-directional transparency from Display to Source General Regulation: CE, FCC, RoHS, WEEE Enclosure: Black Metal Product Dimensions (Each): L = 6 W = 4.1 H = 1.2 Shipping Carton Dimensions: L = 15.4 W = 8.7 H = 3.6 Product Weight (Each): 1 lb Shipping Weight: 3 lbs Power: UL Certified Power Supply 5V / 2A, VAC, Hz Power Consumption: Tx Watts, Rx - 5 Watts Accessories: (2) Mounting Brackets, (3) Locking Cable Clips, (1) Grounding Wire

7 10 11 Important Product Warnings: 1. Connect all cables before providing power to the unit. 2. Test for proper operation before securing unit behind walls or in hard to access spaces. 3. If installing the unit into wall or mounting bracket into sheet-rock, provide proper screw support with bolts or sheet-rock anchors. Safety Instructions: Please be sure to follow these instructions for safe operation of your unit. 1. Read and follow all instructions. 2. Heed all warnings. 4. Do not use this device near water. 5. Clean only with dry cloth. 6. Install in accordance with the manufacturer s instructions. 7. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 8. Only use attachments/accessories specified by the manufacturer. 9. Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way including: Damage to the power supply or power plug Exposure to rain or moisture Power Supply Use: You MUST use the Power Supply provided with your unit or you VOID the Key Digital Warranty and risk damage to your unit and associated equipment. How to Contact Key Digital System Design Group (SDG) For system design questions please contact us at: Phone: sdg@keydigital.com Customer Support For customer support questions please contact us at: Phone: customersupport@keydigital.com Technical Support For technical questions about using Key Digital products, please contact us at: Phone: tech@keydigital.com Repairs and Warranty Service Should your product require warranty service or repair, please obtain a Key Digital Return Material Authorization (RMA) number by contacting us at: Phone: rma@keydigital.com Feedback Please any comments/questions about the manual to: customersupport@keydigital.com Warranty All Key Digital products are built to high manufacturing standards and should provide years of trouble-free operation. They are backed by a limited two-year parts and labor warranty.

8 12 13 Installation Notes Installation Notes