Main Catalogue. Edition Cabinet accessories

Transcription

1 Edition Cabinet accessories

2 PROLINE Overview... 0 Cabinet accessories Cabinets... 1 Wall mounted cases... 2 Mechanics Accessories for cabinets and wall mounted cases... 3 Climate control... 4 Desk-top cases... 5 Subracks/ 19" chassis... 6 Front panels, plug-in units... 7 Telescopic slides Systems... 8 Power supply units... 9 Backplanes Electrics Connectors, front panel component system Appendix ( ) 3.0

3 Cabinet accessories Overview Mechanics 19" front panels with cable eyes, cable throughducting " cable tray " equipment support " drawers " distribution field " mounting tray for LSA " module support Assembly kit Cable ductings Cable supports Cable channels Monitor, keyboard Telescopic slides Electrics Cabinet lights Door contact switches " distributors Small distribution modules Supply modules GND/earthing rails 3.38 Equipment cables 3.39 Bus bars Socket strips Monitor, keyboard Monitor, keyboard " drawer with keyboard Socket strips 3.48 SCHUKO socket strips UTE socket strips IEC socket strips BS socket strips USA socket strips Socket strips Swiss version Socket strips, Wieland " power distributor 3-phase Power Control socket strips ( ) Zubehör 3.1

4 Cabinet accessories Electrics Cabinet light for 19" assembly Electrics With mains on/off switch Mounting height 1 U " cabinet light with fluorescent tube and mains switch, 1 U, IEC C14 plug 1 1 Assembly kit Part no. Cabinet light for 19" assembly Equipment cable, BS British Standard plug, IEC C13 socket, 2.5 m, 1 piece Equipment cable IEC C14 plug, IEC C13 socket, 2.5 m, 1 piece Equipment cable, SCHUKO/UTE SCHUKO/UTE plug, IEC C13 socket, 2.5 m, 1 piece Door contact switch, cabled SCHUKO/UTE plug, IEC C13 socket, 1 piece Delivery: mounted in cabinet or fixed on frame Part no./05 Technical data Mains/line voltage 230 V AC Performance 16 W Illuminant Fluorescent tube T8, base G13, diameter 26 mm, length 360 mm Connection IEC C14 connector Assembly 19" plane Dimensions Height 40 mm, width 483 mm, depth 100 mm Please order mains cable or door contact switch separately 3.30

5 Cabinet accessories Electrics Cabinet light for frame assembly With mains on/off switch VDE approved, non-interference 1 1 Incandescent light (plastic case) with connecting cable, IEC C13 plug and mains switch 2 1 Mounting angle, height 51 mm, width 309 mm, depth29mm 3 1 Assembly kit Part no. Cabinet light for frame assembly Equipment cable, BS British Standard plug, IEC C13 socket, 2.5 m, 1 piece Equipment cable IEC C14 plug, IEC C13 socket, 2.5 m, 1 piece Equipment cable, SCHUKO/UTE SCHUKO/UTE plug, IEC C 13 socket, 2.5 m, 1 piece Door contact switch, cabled SCHUKO/UTE plug, IEC C13 socket, 1 piece Delivery: mounted in cabinet or fixed on frame Part no./05 Technical data SZA45584 Mains/line voltage 230 V AC Performance 35 W Illuminant Light bulb S14s, diameter 30 mm, length 300 mm Connection IEC C14 connector Assembly With mounting angle on the cabinet frame Dimensions Height 35 mm, width 309 mm, depth 51 mm Please order mains cable or door contact switch separately 3.31

6 Cabinet accessories Electrics Cabinet light for magnetic mounting With mains on/off switch With integrated SCHUKO or UTE socket, 230 V AC, 16 A 1 1 Cabinet light (plastic case) with connecting cable IEC C14 plug, integrated mains switch and socket 007_1000 Part no. Cabinet light for magnetic mounting, with UTE socket Cabinet light for magnetic mounting, with SCHUKO socket Equipment cable, BS British Standard plug, IEC C13 socket, 2.5 m, 1 piece Equipment cable IEC C14 plug, IEC C13 socket, 2.5 m, 1 piece Equipment cable, SCHUKO/UTE SCHUKO/UTE plug, IEC C13 socket, 2.5 m, 1 piece Door contact switch, cabled SCHUKO/UTE plug, IEC C13 socket, 1 piece Technical data Mains/line voltage Performance Illuminant Connection Socket Assembly Dimensions 230 V AC 11 W Compact fluorescent lamp PL-S, G23 base, diameter 13 mm, length 200 mm IEC C14 connector 250 V AC, 16 A Magnet Height 355 mm, width 65 mm, depth 65 mm Please order mains cable or door contact switch separately 3.32

7 Cabinet accessories Electrics Door contact switch 1 1 Door contact switch (without connecting cable) 2 1 PG screw fitting M20 x 1.5 for cable diameter mm 3 4 Mounting angle for cabinet assembly (VARISTAR, PROLINE, eurorack) 4 1 Assembly kit Part no. Door contact switch Delivery: mounted in cabinet or fixed on frame Part no./ Door contact switch, cabled Connection to cabinet light via IEC C13 socket Connection with mains supply via SCHUKO/UTE connector Easy handling by Plug and Play (completely wired) (completely wired) Door contact switch with connecting cable to IEC C13 socket, plug and mains connection SCHUKO/UTE, fully wired 2 1 PG screw fitting M20 x 1.5 for cable diameter mm 3 4 Mounting angle for cabinet assembly (VARISTAR, PROLINE, eurorack) 4 1 Assembly kit Part no. Door contact switch, cabled Delivery: mounted in cabinet or fixed on frame Part no./

8 Cabinet accessories Electrics 19" distribution box For installation of power distribution modules on DIN central rails (DIN 43880) With cable support rail at the rear side, strain relief with clamps Two neutral conductors for connector clamps from mm (assembled) 1 1 Case, 2 parts, 3 U/84 HP, AlZn 2 1 Front panel with cut-out for power distribution module, St, 1 mm, RAL Neutral conductors for terminal clamps, Cu, 200 x 3 x 10 mm, zinc-plated, insulated assembly 4 1 DIN central rail, St, zinc-plated, depth-adjustable with spacing bolts 5 1 Cable support rail for clamps, zinc-plated 6 1 Brush strip, plastic, black, for cable entry 7 2 Sealing strip, fibre glass reinforced Polyester, for unused module positions 8 1 GND/earthing conductor, Cu, 1.5 mm 2, green/yellow, length 360 mm 9 1 Label strip Connection clamp Clamp sza Part no. 19" distribution box Connection clamps for 19" distribution box 4 mm 2, yellow/green, PU 10 pieces Connection clamps for 19" distribution box 4 mm 2, blue (N),PU 10 pieces Connection clamps for 19" distribution box 16 mm 2, yellow/green (PE),PU 10 pieces Connection clamps for 19" distribution box 16 mm 2, blue (N),PU 10 pieces Connection clamps for 19" distribution box 35 mm 2, yellow/green (PE),PU 10 pieces Connection clamps for 19" distribution box 35 mm 2, blue (N),PU 10 pieces Clamps for 19" distribution box, PU 14 pieces " assembly kit, see page 3.15 Power distribution module, see page

9 Cabinet accessories Electrics Small distribution module For the installation of power distribution modules on DIN profile rails (DIN 43880) 1 1 Small distribution module, plastic, light grey, with integrated DIN central rail 2 1 Mounting plate for cabinet mounting, Al, 2.5 mm 3 1 Cover strip, plastic, light grey, for unused module spaces 4 1 Assembly kit for cabinet assembly Part no. Small distribution module Power distribution module, see page 3.35 SZA45586 Power distribution modules in accordance with DIN For fitting into 19" distribution box or small distribution module Snaps onto DIN central rail Circuit breaker Width Part no. mm Circuit breaker 1 x 16 A Circuit breaker 3 x 16 A FI safety switch, 16 A, 30 ma SCHUKO socket 250 V, 16 A UTE socket 250 V, 16 A FI safety switch Socket

10 Cabinet accessories Electrics Distribution box 1 1 Distribution box, plastic, light grey 2 1 Terminal strip, 5-pin, for cable cross section 2.5 mm Mounting plate, Al, 2.5 mm, for cabinet assembly 4 1 Assembly kit for cabinet assembly Part no. Distribution box Distribution box with SCHUKO socket 1 1 Distribution box with SCHUKO socket, plastic, light grey, with terminal strip for cable cross section up to 4 mm Mounting plate 90 x 100 mm, AlZn, 1.5 mm, for assembly on cabinet uprights, 19" profiles and depth members 3 1 Assembly kit for cabinet assembly Part no. Distribution box with SCHUKO socket sc

11 Cabinet accessories Electrics Mounting plate for single sockets For common surface sockets 1 1 Mounting plate, Al, 2.5 mm, for cabinet assembly 2 1 Assembly kit for cabinet assembly Part no. Mounting plate for single sockets Surface socket not included in Schroff product range ela44796 GND/earthing clamp IBM compatible GND/earthing terminal for connection of a cabinet with the building Maximum cable cross-section 100 mm 2 Finish tin-plated, in accordance with IBM item no Part no. GND/earthing clamp, incl. assembly kit sc

12 Cabinet accessories Electrics GND/earthing rail To connect GND/earthing wire and stranded conductor via connection clamps Mounting insulated from the frame 1 1 Rail, Cu, cross section 35 mm Rail support block for max. 2 rails, plastic 3 1 Assembly kit for cabinet assembly sc5 Length Part no. mm Additional second GND/earthing rail, length 200 mm, 1piece Additional second GND/earthing rail, length 480 mm, 1piece Connecting clamps for GND/earthing rail, cable cross section 4 mm 2,PU 20 pieces Connecting clamps for GND/earthing rail, cable cross section 16 mm 2,PU 10 pieces Connecting clamps for GND/earthing rail, cable cross section 35 mm 2,PU 5 pieces Please order connecting clamps or second rail separately GND/earthing rail, flat strip To screw on GND/earthing cables with ring tags Threaded connection point M5 in intervals of 20 mm Mounting insulated from the frame 1 1 Rail, Ms, untreated, 1000 x 15 x 3 mm, fixing points M5 in intervals of 20 mm 2 2 Rail support block, plastic 3 1 Assembly kit for cabinet assembly SC6 Qty/PU Part no. GND/earthing rail, flat strip GND/earthing rail, flat strip Item 4 Panhead screw M5 x 10, St, zinc-plated, PU 100 pieces Please order panhead screw M5 to screw on GND/earth cable separately 3.38

13 Cabinet accessories Electrics Equipment cable For: Fans, cabinet lights,... Industrial PC connections Uninterruptable power supplies Systems 1 1 Equipment cable, PVC, max. 250 V AC, max. 10 A AZA43067 Connector, mains/line side SCHUKO/UTE Female connector IEC C13, equipment side Length mm Colour Application Approvals/ certifications Part no. black AZA43068 BS aza43071 aza grey (in accordance with DIN ) grey (in accordance with DIN ) Germany, France, Austria, Norway, The Netherlands, Sweden, Finland, Spain, Portugal, Turkey, Greece, Belgium, Luxemburg black Great Britain, Ireland AZA43069 USA aza black USA, Canada AZA43070 IEC C14 AZA black worldwide IEC

14 Cabinet accessories Electrics Busbar 3 and 4 pin Vertical voltage distribution in cabinets Can be sawn off to achieve required length Connections: FASTON connector 6.3 x 0.8 mm (assembled) 1 1 Insulating body for 4 inner conductors, length 1855 mm, PVC 2 3 (4) Inner conductor, pushed in 3 2 Fixing with insulating block, to be pushed in, PA 6, black, Material Length Part no. mm 3 pin E-Cu tin-plated pin E-Cu tin-plated pin Brass untreated Item 3 Mounting block PVC, black, PU 10 pieces with assembly kit Item 5 Mounting angle for cabinet assembly St, 1.5 mm, finish AlZn, PU 4 pieces Technical data Mains voltage 500 V AC (50 Hz) Nominal current CuZn conductor 32 A (T U = 40 C) Nominal current Cu conductor 63 A (T U = 40 C) Conductor resistance 6.8 m /m (CuZn), 1.9 m /m (Cu) Max. temperature of rail 70 C Flammability of the insulation body UL 94 V-0 Mounting with insulating block for busbar 3, 4 pin AZA42396 After cutting to length, please order fixings with insulating block separately Mounting angle for cabinet assembly AZA42393 aza

15 Cabinet accessories Electrics Busbar 1 and 2 pin Vertical current distribution in cabinet Can be shortened to any size by cutting Connections Faston 6.3 x 0.8 mm (assembled) 1 1 Insulating body for 2 inner conductors, length 1900 mm, PVC 2 1 (2) Inner conductor, pushed in 3 2 Insulating block, glued in, PA 6, grey Material Length Part no. mm 1 pin E-Cu tin-plated pin E-Cu tin-plated pin Brass untreated pin Brass tin-plated Technical data Mains voltage Isolation voltage Nominal current CuZn conductor Cu conductor Breakdown voltage/test voltage Conductor cross-section Conductor resistance Max. temperature of rail 70 C Flammability of the insulation body UL 94 V V AC (50 Hz) 750 V 50 A (T U =20 C), 32 A (T U =50 C) 110 A (T U =20 C), 60 A (T U =50 C) 2500 V/2 kv/1 min 18 mm² 4 m /m (CuZn), 1 m /m (Cu) For assembly please order insulating block or mounting bracket separately, see page 3.42 A4_

16 Cabinet accessories Electrics Mounting bracket for busbar 1, 2 pin Mounting of busbars in full length (max. 6 boards) After cutting to length, glue in new insulating blocks Numbers are stamped on for conductor identification 1 4 Mounting bracket, plastic, Noryl, black 2 8 Screw with cross recess, St, M4 x 30, zinc-plated Part no. Mounting bracket for busbar 1, 2 pin Item 3 Insulating block for shortened busbar 1, 2 pin Item 4 Identification label with transparent cover, PU per 10 pieces Item 5 Mounting angle for cabinet assembly St, 1.5 mm, finish AlZn, PU 4 pieces To ensure stability, mounting brackets should be fitted at 500 mm intervals A4-562A Mounting with insulating block for power rail 1 or 2pin Easy and space saving assembly of shortened busbars With integrated insulating block Mounting in rows possible 1 4 Mounting with insulating block, noryl, black 2 4 Screw, M4 x 25, St, zinc-plated ela44253 Part no. Mounting with insulating block for power rail 1 or 2pin Mounting angle for cabinet assembly St, 1.5 mm, finish AlZn, PU 4 pieces M6 screw, washer and nut for row mounting not included ELA

17 Cabinet accessories Electrics Contact protection for busbar pin Cover for the inner conductor (between the connectors) Can be shortened at any size 1 1 Protection against direct contact for busbar, length 1 m A4-566 Length Part no. m Protection against direct contact for busbar Insulating block for busbar pin The insulating block separates several circuits in between a rail 1 10 Insulating block, PVC Ø 4 x 20 mm Part no. Insulating block for busbar pin A4-1961c 3.43

18 Cabinet accessories Electrics Power connector for busbar pins, 63 A Nominal current max. 63 A for 40 C Cable cross section max. 16 mm² Power supply protected against direct contact 1 1 Power connector, ABS/E-Cu, tin-plated, ABS, selfextinguishing 2 1 Allen key, St, zinc-plated ela44252 Part no. Power connector for busbar pins, 63 A Power connector requires two FASTON slots Power connector for busbar pin, 125 A Nominal current max. 125 A for 40 C Cable cross section max. 25 mm² Power supply protected against direct contact 1 1 Power connector, PA, halogen-free, copper terminal, clamped Part no. Power connector for busbar pin, 125 A Power connector requires three FASTON slots 3.44

19 Cabinet accessories Monitor, keyboard Monitor-Keyboard-Touchpad, 1 U Monitor, keyboard Pull-out LCD colour monitor, 15", TFT, max. resolution 1024 x 768 pixels Connection to PS/2 or VGA interface Depth-adjustable for different pitches of server panel/slide mounts (Assembled and wired) U monitor with keyboard and touchpad (width 65.5, height 46.5 mm), RAL 9001, with telescopic slides, connection monitor via VGA (SUB-D 15), connection keyboard and touchpad via PS/2 2 2 Extension bracket for 1000 mm assembly, St, RAL Connecting cable PS/2, 1.8 m, for mouse 4 1 Connecting cable PS/2, 1.8 m, for keyboard 5 1 Connecting cable SUB-D 15, 1.8 m, for monitor 6 1 Connecting cable SCHUKO/UTE - IEC C13 socket, 1.8 m, for mains supply 7 1 Assembly kit and user manual Cable ducting Qty/PU Part no. German keyboard layout English keyboard layout French keyboard layout Equipment cable, BS British Standard plug, IEC C13 socket, 2.5 m, 1 piece Adaptor, USB - 2 x PS/2 USB connector, PS/2 female connector, length 160 mm, 1 piece Connections Technical data Mains voltage Power consumption Monitor Keyboard Touchpad Dimensions (with closed monitor) Dimensions (with open monitor, fully extracted) Weight MTBF V AC (50 Hz Hz) max. 30 W, in "off" mode < 1 W LCD, 15" Active Matrix TFT panel, pixel pitch x 0.297, max. resolution XGA 1024 x 768 pixels (60/70/75 Hz), 16.2 million colours, contrast 400:1, brightness 430 cd/m 2, connection 15-pin H-DSUB female connector 105 keys, PS/2 connection Industry standard, width 65.5 mm, height 46.5 mm, PS/2 connection Height 44 mm, width mm, depth 500 mm Height 350 mm, width mm, depth 950 mm 16 kg h Adaptor, USB 2 x PS/ Please order adaptor, USB plug and 2 x PS/2 sockets separately Adaptation of the English keyboard (IEC 60320) to other mains connections see page

20 Cabinet accessories Monitors, keyboards 19" drawer with keyboard 1 U Monitors, keyboards Pull-out keyboard incl. function keys, numeric keypad and touch pad Connection to PS/2 or USB interface with adaptor (please order separately) Colour light grey (RAL 7035) or black grey (RAL 7021) Touchpad can be switched off; double-click function may be adjusted Compatible with Microsoft Windows 2000, ME, XP Software drivers can be downloaded from Internet " drawer with keyboard, front panel, 1 U; connection with PS/2 connector, cable length 1 m Height Width Depth RAL 7021 RAL 7035 B U mm mm Part no. Part no German keyboard layout French keyboard layout UK keyboard layout USA keyboard layout Adaptor, USB - 2 x PS/2 USB connector, PS/2 female connector, length 160 mm, 1 piece Please order adaptor, USB plug and 2 x PS/2 sockets separately 19" assembly kit, see page Adaptor, USB 2 x PS/

21 Cabinet accessories Monitors, keyboards 19" keyboard drawer, 2 U For keyboards up to 425 mm wide, 210 mm deep, 45 mm high IP 40 when closed 1 1 Keyboard drawer with hinged front panel, AI, anodised (incl. locking) 2 2 Telescopic slide, St, zinc-plated 3 1 Keyboard support, St, 2.5 mm, RAL Front horizontal rail, AI extrusion, anodised Part no. 19" keyboard drawer, 2 U Lock for 19" keyboard drawer 1 lock incl. 2 keys Without keyboard 19" assembly kit, see page 3.15 A

22 Overview... 0 Cabinets... 1 Socket strips Cabinet accessories Socket strips Wall mounted cases... 2 Accessories for cabinets and wall mounted cases... 3 Climate control... 4 Desk-top cases Subracks/ 19" chassis... 6 Front panels, plug-in units... 7 Systems... 8 Single phase and multi-phase strips Strips with fixed connecting cables or with Wieland GST 18 connecting system Power supply units... 9 Backplanes Broad range of functional elements up to Master-Slave " power distribution for 3 phases, 2 performance classes Connectors, front panel component system Appendix Downloads and further important information can be found on the Internet under

23 Cabinet accessories Socket strips Overview Socket strips Socket strips Modular, compact assembly with a variety of functional elements Mains/line connection with country-specific connector or with Wieland system GST18 Horizontal assembly on the 19" plane (1 U) or vertical assembly on the cabinet frame Multi-phase feeding-in by 3-phase strips or IEC power distributor Socket strips with connecting cable Hardwired connecting cable (2 m) with country-specific mains connecting plug (IEC strips open end) Operational elements: residual current protection, overload protection, transient protection, interference suppression filter Socket strips with connecting cable SCHUKO SCHUKO socket strips SCHUKO socket strips, master-slave SCHUKO socket strips, 3 circuits UTE UTE socket strips UTE socket strips, master-slave UTE socket strips, 3 circuits IEC IEC socket strips BS BS socket strips Socket strips with connection via Wieland GST18 system Various connecting plugs and cable lengths Functional elements: Overcurrent protection Designed for connection to the 19" power distributor, 3-phase 19" power distributor, 3-phase 3-phase power distributor for connecting to single-phase consumers or socket strips Input 3-phase 400 V AC (32 A or 63 A) Output via IEC C19 sockets V AC in 32 A/phase version V AC in 63 A/phase version Overcurrent protection for each output ServicePLUS from page 3.65 e.g. Individual configuration: design, socket inserts, mains connection, function (filter, overcurrent, overload protection) US USA socket strips Switzerland Socket strips Swiss version Socket strips, Wieland SCHUKO socket strips, Wieland UTE socket strips, Wieland IEC socket strips, Wieland Connecting cables for Wieland " power distributor 3-phase ServicePLUS ServicePLUS configuration Power Control socket strips

24 Cabinet accessories Socket strips 0 SCHUKO socket strip Socket strips Socket strips with SCHUKO inserts, either with switch or functional elements Mounting height 1 U Connecting cable, 2 m, with SCHUKO/UTE connector For installation, socket strips can be rotated in all directions (in 90 increments) Horizontal and vertical assembly possible DTA V, 16 A In accordance with DIN 41494, DIN 57620, VDE 0620 Item 6 bracket for vertical mounting (assembled) 1 1 Al extrusion, 1 U, anodised, for socket inserts and functional elements 2 SCHUKO socket inserts (35 rotated, PA, RAL 7035), illuminated switch and functional elements, type and number, see Order information 3 2 End piece, PA, RAL Connecting cable, black, 2 m, 05VV-F 3G 1.5 mm 2, with SCHUKO/UTE connector, PVC, encapsulated 5 2 Mounting angle, PA, RAL 7035 (only with 10", 19" version) ServicePLUS see page 3.65 Socket inserts Length Length Depth Switch Functional element Part no. Inch mm mm " SCHUKO 9 19" " X SCHUKO - with switch X X X " Fault current protection " Overcurrent protection " Fault current protection, overcurrent protection SCHUKO with 7 19" Mains suppression filter functional elements 8 19" Transient protection " Transient protection, mains suppression filter Transient protection Item 6 Mounting angle for vertical mounting of socket strips, St, 2 mm, PU 2 pieces Delivery: mounted in cabinet or fixed on frame Part no./05 Please order mounting bracket for vertical assembly separately Individual online configuration

25 Cabinet accessories Socket strips SCHUKO socket strip, Master-Slave Socket strips When the master unit is switched on, the slave outputs are connected sequentially to the mains supply (with adjustable time delay) Mounting height 1 U Connecting cable, 2 m, with SCHUKO/UTE connector For installation, socket strips can be rotated in all directions (in 90 increments) Horizontal and vertical assembly possible DTA V, 16 A Conforms to DIN 41494, DIN (assembled) 1 1 Al extrusion, 1 U, anodised, for socket inserts 2 6 SCHUKO socket inserts (35 rotated, PA, RAL 7035) 3 2 End piece, PA, RAL Connecting cable, black, 2 m, 05VV-F 3G 1.5 mm 2, with SCHUKO/UTE connector, PVC, encapsulated 5 2 Mounting angle, PA, RAL 7035 Item 6 bracket for vertical mounting ServicePLUS see page Socket inserts Length Length Depth Part no. Inch mm mm 6 19" Item 6 Mounting angle for vertical mounting of socket strips, St, 2 mm, PU 2 pieces Delivery: mounted in cabinet or fixed on frame Part no./05 Please order mounting bracket for vertical assembly separately Individual online configuration

26 Cabinet accessories Socket strips SCHUKO socket strip, 3 circuits Socket strips 3 phases with 230 V, 16 A per phase Mounting height 1 U Connecting cable, 2 m, open end with ferrule For installation, socket strips can be rotated in all directions (in 90 increments) Vertical assembly In accordance with DIN 41494, DIN 57620, VDE DTA44115 (assembled) 1 1 Al extrusion, 1 U, anodised, for socket inserts 2 9 SCHUKO socket inserts (35 rotated, PA, RAL 7035), 3 phases x 3 inserts, different colours 3 2 End piece, PA, RAL Connecting cable, black, 2 m, 05VV-F 5G 2.5 mm 2, open end with ferrule Item 6 bracket for vertical mounting ServicePLUS see page Socket inserts Height Length Depth Part no. U mm mm Item 6 Mounting angle for vertical mounting of socket strips, St, 2 mm, PU 2 pieces Delivery: mounted in cabinet or fixed on frame Part no./05 Please order mounting bracket for vertical assembly separately Individual online configuration

27 Cabinet accessories Socket strips UTE socket strip Socket strips Socket strip with SCHUKO socket inserts, either with switch or functional elements Mounting height 1 U Connecting cable, 2 m, with SCHUKO/UTE connector For installation, socket strips can be rotated in all directions (in 90 increments) Horizontal and vertical assembly possible DTA V, 16 A In accordance with NFC Item 6 bracket for vertical mounting (assembled) 1 1 Al extrusion, 1 U, anodised, for socket inserts and functional elements 2 UTE socket inserts (35 rotated, PA, RAL 7035), illuminated switch and functional elements, type and number, see Order information 3 2 End piece, PA, RAL Connecting cable, black, 2 m, 05VV-F 3G 1.5 mm 2, with SCHUKO/UTE connector, PVC, encapsulated 5 2 Mounting angle, PA, RAL 7035 (only with 10", 19" version) ServicePLUS see page 3.65 Socket inserts Length Length Depth Switch Functional element Part no. Inch mm mm 4 10" " UTE UTE with switch 8 19" X X " Fault current protection " Overcurrent protection " Fault current protection, overcurrent protection UTE with functional element 7 19" Netzentstörfilter " Transient protection '' Transient protection, mains/line suppression filter Item 6 Mounting angle for vertical mounting of socket strips, St, 2 mm, PU 2 pieces Delivery: mounted in cabinet or fixed on frame Part no./05 Please order mounting bracket for vertical assembly separately Individual online configuration

28 Cabinet accessories Socket strips UTE socket strip, Master-Slave Socket strips During the "switch-on" of the master unit the slave outputs are connected in sequential order to the mains supply (delay is adjustable) Mounting height 1 U Connecting cable, 2 m, with SCHUKO/UTE connector For installation, socket strips can be rotated in all directions (in 90 increments) Horizontal and vertical assembly possible DTA V, 16 A In accordance with NFC (assembled) 1 1 Al extrusion, 1 U, anodised, for socket inserts 2 6 UTE socket inserts (35 rotated, PA, RAL 7035) 3 2 End piece, PA, RAL Connecting cable, black, 2 m, 05VV-F 3G 1.5 mm 2, with SCHUKO/UTE connector, PVC, encapsulated 5 2 Mounting angle, PA, RAL 7035 Item 6 bracket for vertical mounting ServicePLUS see page Socket inserts Length Length Depth Part no. Inch mm mm 6 19" Item 6 Mounting angle for vertical mounting of socket strips, St, 2 mm, PU 2 pieces Delivery: mounted in cabinet or fixed on frame Part no./05 Please order mounting bracket for vertical assembly separately Individual online configuration

29 Cabinet accessories Socket strips UTE socket strip, 3 circuits Socket strips 3 phases with 230 V, 16 A per phase Mounting height 1 U Connecting cable, 2 m, open end with ferrule For installation, socket strips can be rotated in all directions (in 90 increments) Vertical assembly In accordance with NFC DTA44116 (assembled) 1 1 Al extrusion, 1 U, anodised, for socket inserts 2 9 UTE socket inserts (35 turned, PA, RAL 7035), 3 phases x 3 inserts, different colours 3 2 End piece, PA, RAL Connecting cable, black, 2 m, 05VV-F 5G 2.5 mm 2, open end with ferrule Item 6 bracket for vertical mounting ServicePLUS see page Socket inserts Height Length Depth Part no. U mm mm Item 6 Mounting angle for vertical mounting of socket strips, St, 2 mm, PU 2 pieces Delivery: mounted in cabinet or fixed on frame Part no./05 Please order mounting bracket for vertical assembly separately Individual online configuration

30 Cabinet accessories Socket strips IEC socket strip Socket strips Socket strip with IEC C13 sockets, optionally with switch Mounting height 1 U Connecting cable, 2 m, open end with ferrules For installation, socket strips can be rotated in all directions (in 90 increments) Horizontal and vertical assembly possible 230 V, 10 A DTA44118 In accordance with IEC (assembled) 1 1 Al extrusion, 1 U, anodised, for socket inserts and functional elements 2 IEC socket inserts (PA, RAL 7035) and switch (illuminated), type and number, see Order information 3 2 End piece, PA, RAL Connecting cable, black, 2 m, open end with ferrule, 05VV-F 3G 1.5 mm Mounting angle, PA, RAL 7035, only for 19" versions Item 6 bracket for vertical mounting ServicePLUS see page IEC IEC with switch Socket inserts Length Length Depth Part no. Inch mm mm 8 19" " Item 6 Mounting angle for vertical mounting of socket strips, St, 2 mm, PU 2 pieces Delivery: mounted in cabinet or fixed on frame Part no./05 Please order mounting bracket for vertical assembly separately IEC socket strips, telemonitored and remote-controlled, see page 3.66 IEC socket strips with universal connections (Wieland connector), see page 3.62 Individual online configuration

31 Cabinet accessories Socket strips BS socket strip Socket strips Socket strips with British Standard socket inserts, alternatively with switch Mounting height 1 U Connecting cable 2 m with BS plug (fuse integrated) For installation, socket strips can be rotated in all directions (in 90 increments) Horizontal and vertical assembly possible DTA V, 13 A In accordance with BS-1363 Item 6 bracket for vertical mounting ServicePLUS see page (assembled) 1 1 Al extrusion, 1 U, anodised, for socket inserts and functional elements 2 BS socket inserts (PA, RAL 7035) and switch (illuminated), type and number see Order information 3 2 End piece, PA, RAL Connecting cable, black, 2 m, 05VV-F 3G 1.5 mm 2, with BS connector (integrated 13 A fuse), PVC, encapsulated 5 2 Mounting angle, PA, RAL 7035, only for 19" versions Socket inserts Length Length Depth Part no. Inch mm mm BS 7 19" BS BS with switch 6 19" Item 6 Mounting angle for vertical mounting of socket strips, St, 2 mm, PU 2 pieces Delivery: mounted in cabinet or fixed on frame Part no./05 Please order mounting bracket for vertical assembly separately Individual online configuration

32 Cabinet accessories Socket strips USA socket strip Socket strips Socket strips with USA socket inserts, alternatively with switch Mounting height 1 U Connecting cable, 2 m, with USA plug For installation, socket strips can be rotated in all directions (in 90 increments) Horizontal and vertical assembly possible 115 V, 15 A DTA44797 In accordance with UL-498, CSA (assembled) 1 1 Al extrusion, 1 U, anodised, for socket inserts and functional elements 2 USA socket inserts (PA, RAL 7035) and switch (illuminated), type and number see Order information 3 2 End piece, PA, RAL Connecting cable, black, 2 m, 05VV-F 3G 1.5 mm 2, with USA socket, PVC, encapsulated 5 2 Mounting angle, PA, RAL 7035, only for 19" versions Item 6 bracket for vertical mounting ServicePLUS see page Socket inserts Length Length Depth Part no. Inch mm mm US 11 19" US US with switch 11 19" Item 6 Mounting angle for vertical mounting of socket strips, St, 2 mm, PU 2 pieces Delivery: mounted in cabinet or fixed on frame Part no./05 Please order mounting bracket for vertical assembly separately Individual online configuration

33 Cabinet accessories Socket strips Swiss socket strip Socket strips Socket strips with Swiss version socket inserts, alternatively with switch Mounting height 1 U Connecting cable, 2 m, with Swiss version connector For installation, socket strips can be rotated in all directions (in 90 increments) Horizontal and vertical assembly possible DTA V, 10 A In accordance with SEV.IEC Item 6 bracket for vertical mounting ServicePLUS see page (assembled) 1 1 Al extrusion, 1 U, anodised, for socket inserts and functional elements 2 Swiss version socket inserts (PA, RAL 7035) and illuminated switch, type and number, see Order information 3 2 End piece, PA, RAL Connecting cable, black, 2 m, 05VV-F 3G 1.0 mm 2, with Swiss version connector, PVC, encapsulated 5 2 Mounting angle, PA, RAL 7035 Socket Length Length Depth Part no. inserts Inch mm mm Swiss version 10 19" Swiss version with switch 9 19" Item 6 Mounting angle for vertical mounting of socket strips, St, 2 mm, PU 2 pieces Delivery: mounted in cabinet or fixed on frame Part no./05 Please order mounting bracket for vertical assembly separately Individual online configuration

34 Cabinet accessories Socket strips SCHUKO socket strip with Wieland connection Input via Wieland GST 18 plug Output via SCHUKO sockets Versions with overcurrent protection Socket inserts in white, black or red colours Al extrusion, 1 U, anodised, length mm, depth 44 mm, height 44.45; to accept the socket inserts 2 6/8 Socket inserts (turned 35, polyamide), number and colour see Order information 3 2 Endpiece, PA, RAL Wieland connecting socket GST Mounting angle, PA, RAL 7035 Overcurrent protection switch Please order bracket for vertical mounting seperately Mains connection cables, see page " power distributor for connection of multiple socket strips, see page 3.64 Individual online configuration Item 6 bracket for vertical mounting ServicePLUS see page 3.65 Socket inserts Length Length Depth Functional element Part no. Inch mm mm SCHUKO, white, Wieland, with over-current protection switch 6 19" Overcurrent protection SCHUKO, black, Wieland, with over-current protection switch 6 19" Overcurrent protection SCHUKO, red, Wieland, with over-current protection switch 6 19" Overcurrent protection SCHUKO, white, Wieland 8 19" SCHUKO, black, Wieland 8 19" SCHUKO, red, Wieland 8 19" Item 6 Mounting angle for vertical mounting of socket strips, St, 2 mm, PU 2 pieces

35 Cabinet accessories Socket strips UTE socket strip with Wieland connection Input via Wieland GST 18 plug Output via UTE sockets Versions with overcurrent protection Socket inserts in white, black or red colours Al extrusion, 1 U, anodised, length mm, depth 44 mm, height 44.45; to accept the socket inserts 2 6/8 Socket inserts (turned 35, polyamide), number and colour see Order information 3 2 Endpiece, PA, RAL Wieland connecting socket GST Mounting angle, PA, RAL 7035 Overcurrent protection switch Please order bracket for vertical mounting seperately Mains connection cables, see page " power distributor for connection of multiple socket strips, see page 3.64 Individual online configuration Item 6 bracket for vertical mounting ServicePLUS see page 3.65 Socket inserts Length Length Depth Functional element Part no. Inch mm mm UTE, white, Wieland, with over-current protection switch 6 19" Overcurrent protection UTE, black, Wieland, with over-current protection switch 6 19" Overcurrent protection UTE, red, Wieland, with over-current protection switch 6 19" Overcurrent protection UTE, white, Wieland 8 19" UTE, black, Wieland 8 19" UTE, red, Wieland 8 19" Item 6 Mounting angle for vertical mounting of socket strips, St, 2 mm, PU 2 pieces

36 Cabinet accessories Socket strips IEC socket strip with Wieland connection Input via Wieland GST 18 plug Output via IEC C13 sockets Versions with overcurrent protection Socket inserts in white, black or red colours Traction protection by means of retaining clips Al extrusion, 1 U, anodised, length mm, depth 44 mm, height 44.45; to accept the socket inserts 2 6/12 Socket inserts (turned 35, polyamide), number and colour see Order information 3 2 Endpiece, PA, RAL Wieland connecting socket GST Mounting angle, PA, RAL 7035 Overcurrent protection switch Please order bracket for vertical mounting seperately Mains connection cables, see page " power distributor for connection of multiple socket strips, see page 3.64 Individual online configuration Item 6 bracket for vertical mounting Socket inserts Length Length Depth Functional element Part no. Inch mm mm IEC, white, Wieland, with over-current protection switch 6 19" Overcurrent protection IEC, black, Wieland, with over-current protection switch 6 19" Overcurrent protection IEC, red, Wieland, with over-current protection switch 6 19" Overcurrent protection IEC, white, Wieland 12 19" IEC, black, Wieland 12 19" IEC, red, Wieland 12 19" Item 6 Mounting angle for vertical mounting of socket strips, St, 2 mm, PU 2 pieces Retaining clips for IEC C13 plug PU 12 pieces Equipment cable IEC C14 plug, IEC C13 socket, 0.5 m, 1 piece Equipment cable IEC C14 plug, IEC C13 socket, 1 m, 1 piece

37 Cabinet accessories Socket strips Connecting cables for Wieland socket strips Enables simple connection to current supply (e.g. for socket strips) Different connecting plugs Different cable lengths available Pos. Menge Beschreibung 1 1 Connecting cable, 1.5 mm 2, black, input, output and cable lengths see Order information ServicePLUS see page 3.65 Input Current Output Length Part no. A m Open end 16 Wieland GST Open end 16 Wieland GST Open end 16 Wieland GST IEC Wieland GST IEC Wieland GST IEC Wieland GST IEC C20 16 Wieland GST IEC C20 16 Wieland GST IEC C20 16 Wieland GST SCHUKO/ UTE 16 Wieland GST SCHUKO/ UTE 16 Wieland GST BS plug 13 Wieland GST BS plug 13 Wieland GST Other inputs, outputs and cable lengths available on request Individual online configuration

38 Cabinet accessories Socket strips 19" power distributor, 3-phase 3-phase distributor for connecting to single-phase consumers or socket strips Input 3-phase 400 V AC (32 A or 63 A) Output via IEC C19 sockets V AC in 32 A/phase version V AC in 63 A/phase version Overcurrent protection for each output (assembled) " power distributor, 3 U, St, 1.5 mm, RAL 7021, with cable fitting M32, plastic, white 2 6/9 Socket inserts IEC C19, with plug retaining clip, quantity see Order information 3 6/9 Overcurrent protection switch, 16 A, quantity see Order information 4 2 Handle, Al, black, incl. assembly kit (supplied loose) Overcurrent protection switch (per phase and output socket) Rear: Plug retaining clips and cable fitting Height Width Depth Output Input Part no. mm mm mm (2 230 V AC per phase) 9 (3 230 V AC per phase) SCHUKO socket strip see page 3.60 UTE socket strip see page 3.61 IEC socket strip see page A (400 V AC ) 3 63 A (400 V AC ) Mains cable, IEC C20 plug, Wieland socket to connect 19" power distributor to Wieland sockets Length 1 m, 1 piece Mains cable, IEC C20 plug, Wieland socket to connect 19" power distributor to Wieland sockets Length 2.5 m, 1 piece Mains cable, IEC C20 plug, Wieland socket to connect 19" power distributor to Wieland sockets Length 5 m, 1 piece Mains cable for Wieland socket strips ServicePLUS see page

39 Cabinet accessories Socket strips ServicePLUS Three phase power distribution with 19" power distributor and socket strips with Wieland connection Socket strips ServicePLUS Modular structure The 19" power distributor (3-phase) in the cabinet needs connecting by an electrician Easy cabling of the socket strips with "Plug & Play" Cabling example Item 1 19" power distributor 2 Three-phase connecting cable 3 Socket strips with Wieland connection, red 4 Socket strips with Wieland connection, black 5 Mains cable, from 19" power distributor to socket strip 6 Mains cable, from socket strip to consumer (e.g. server) configuration Components can be varied and combined freely Simple. Fast. For the product you want. Configuration Various shapes (lengths) Different socket inserts Different euqipment cables Single phase and multi phase Combinations of functions (mains suppression filter, fault current protection FI, overcurrent protection, transient protection) Online configuration: solution Integration and custom developments Simple. Fast. From one source. Integration into cabinet incl. cabling and function test Special sizes, customised solutions Further information:

40 Overview... 0 Cabinets... 1 Power Control socket strips Cabinet accessories Power Control socket strips Wall mounted cases... 2 Accessories for cabinets and wall mounted cases... 3 Climate control... 4 Desk-top cases Subracks/ 19" chassis... 6 Front panels, plug-in units... 7 Mains connection plug to IEC 60309, 16 A or 32 A Interfaces: serial, feature or LAN Cable restraint of output connectors with cable retention rail Systems... 8 Power supply units... 9 Backplanes Local display and local operation Remote monitoring and parametrisation with web-based user interface Event logging Connectors, front panel component system Appendix Downloads and further important information can be found on the Internet under

41 Cabinet accessories Power Control socket strips Overview Power Control socket strips Power management in the server cabinet Monitoring of output, power and voltage of the complete socket strip or of every individual socket insert Remote monitoring or local display Remote control of each insert (switch on / off) Sequential switch on / off of the individual inserts can be programmed Individual user access authorisation for every individual socket insert 19" case 1 U for 8 outputs IEC C13 2 U for 2 x 8 outputs IEC C13 19" cases 1 U, 8 outputs U, 16 outputs Socket strips 12 outputs, 16 A outputs, 16 A outputs, 32 A Socket strips 12 outputs IEC C13, input current 16 A 20 outputs IEC C13, input current 16 A 20 outputs IEC C13, input current 32 A ServicePLUS from page 3.70 e.g. individual configuration (dimensions, socket inserts, mains connection ServicePLUS ServicePLUS configuration Socket strips with connecting cables

42 Cabinet accessories Power Control socket strips Telemonitored and remote-controlled socket strips in 19" case Power Control socket strips 19" socket strips 1 U or 2 U Outputs with C13 female connectors to IEC 60320, 230 V AC, 10 A Mains/line connector 230 V AC, 16 A connector to IEC 60309, cable length 4,5 m Cable restraint of outputs with cable retention rail Display and integrated Web interface Rear view 2 U U 2 U Case, black, with interfaces to front and socket inserts and display to rear Mains/line connector 230 V AC, 16 A connector to IEC 60309, cable length 4,5 m " mounting angle, St, 1 mm, black Cable retention rail, St, 1 mm, black Cable tie, 2.5 x 100 mm, white Serial interface cable with RJ 45 male and DB9F female connector, black Assembly kit Depth incl. 19" mounting brackets: 1 U mm, 2 U mm 19" mounting bracket at 1 U Height Width Depth Input Number of Part no. U mm mm mm outputs V AC, 16 A x 230 V AC, 16 A 2 x " assembly kit on page 3.15 User manual, current firmware: To download please enter part number at

43 Cabinet accessories Power Control socket strips Telemonitored and remote-controlled socket strips Socket strips for vertical mounting Outputs with C13 female connectors to IEC 60320, 230 V AC, 10 A Mains input 230 V AC, 16 A or 32 A plug to IEC 60309, cable length2m Hydraulic-magnetic circuit beakers in 32 A version Display and integrated Web interface Socket strip, black, with interfaces, socket inserts and display, mains connector 230 V AC, 16 A or 32 A plug to IEC 60309, cable length 4.5 m 2 2 Mounting bracket, plastic, grey, clip-on 3 1 Serial interface cable with RJ 45 male and DB9F female connector, black 4 1 User manual Circuit breaker Display and interface Height Width Depth Input Number of Part no. mm mm mm outputs V AC, 16 A V AC, 16 A V AC, 32 A User manual, current firmware: To download please enter part number at Construction example