DVI-HDCP-TPS-TX210. TPS (HDBaseT TM ) extender for DVI with local monitor out. Highlight features

Transcription

1 TPS (HDaseT TM ) extender for with local monitor out The is a compact video, and control transmitter over single T cable up to 170 meter distance for everchanging environments such as small board rooms and classrooms. The extender was designed to handle and 1.4 digital video, embedded and control signals. Part No: The handles H encryption. Using the factory, custom or transparent EDID emulation the user can fix and lock EDID data on each input connector. dvanced EDID Management forces the required resolution from any video source and fixes the output format to conform to the system requirements. The unit offers bi-directional and transparent IR, RS232 and transmission. Furthermore the RS232 and IR connection supports command injection. Remote powering is available through the single T 5e... T 7 cable, but a local power supply can also be used. ll devices can be mounted on a rack shelf or used in standalone formats. Due to Lightware s attentive design the - H-TPS-TX210 is compatible with both the HDaseT extenders and matrix switchers. Highlight features 4K and UHD video Extends, udio IR over a single T5e...T7e cable up to 170 m distance* Event Manager 10/100 extension i-directional and IR *Depends on cable category and quality HDaseT and the HDaseT lliance logo are trademarks of the HDaseT lliance 1/7

2 LIVE SRV TX RX LIVE TX RX D IN 12V 3 D IN 48V 5 Standalone application P 12V D power adaptor ccess point 12V D power adaptor -TPS-RX95 TPS OUT (PoE) SRV 12V 1 D Touch panel HD -D OUT switch Internet Tx up to 170m Local monitor pplication diagram -D OUT P TPS OUT (PoE) switch 12V 1 D MX--3D-O- OUT 1 OUT 2 OUT 3 OUT 4 OUT 5 OUT 6 OUT 7 OUT 8 8H OUTPUT ORD FOR WITH 3D ND NLOG UDIO TPS OUT 1 S/PDIF I/O 1 TPS OUT 2 S/PDIF I/O 2 TPS OUT 3 S/PDIF I/O 3 TPS OUT 4 S/PDIF I/O 4 TPS OUT 5 S/PDIF I/O 5 TPS OUT 6 S/PDIF I/O 6 TPS OUT 7 S/PDIF I/O 7 TPS OUT 8 S/PDIF I/O 8 IN 1 IN 2 IN 3 IN 4 IN 5 IN 6 IN 7 IN 8 MX-TPS2-O-S 8 H TPS OUTPUT ORD WITH DIGITL UDIO 12V power on TPS connector. Only use with compatible devices! MX-TPS-I-S 8 H TPS INPUT ORD 12V power on TPS connector. Only use with compatible devices! MX--3D-I- 8H INPUT ORD FOR WITH 3D ND NLOG UDIO TPS IN 1 TPS IN 2 TPS IN 3 TPS IN 4 TPS IN 5 TPS IN 6 TPS IN 7 TPS IN 8 MX-FR17 External power supply Tx up to 170m Power send V Receiver 5.1 speakers Local monitor -TPS-RX95 Power send Tx up to 170m Local monitor P Transmitter front and back view 2/7

3 Event Manager The Event Manager is a completely new feature of Lightware s UMX-TPS extender family. It s available through the Lightware Device ontroller and can be configured to detect LW3 protocol HNGE messages. The Event Manager was developed to handle tasks from the most simple; like displaying internal events on GPIO ports, and controlling the extender via GPIO inputs instead of front panel pushbuttons; to expert ones like controlling the rolling shutter, the air conditioning system or the lights based on any condition changes on the media ports, such as a new source being connected or removed. The Event Manager makes the UMX- TPS extender family an expert solution in a wider range of applications. Event Manager Wizard ssigning an action to a condition is quick and easy with the Event manager s smart Wizard function. The user can choose from the given port options in the dropdown menu and also add expressions to it. The Events menu contains 20 separately configurable Events The Event Wizard makes the setup easy with simple dropdown options There are many default Expression available to choose from Green lines show which Event is configured and active, the rest stay grey 3/7

4 TX RX TX RX LIVE LIVE Event Manager example VG -TPS-RX95 Tx up to 170m imac GPIO 12V 1 D SRV UDIO2 IN -I IN UMX-TPS-TX140 utton panel Relay box Lamp ondition ction INPUT OUTPUT Input select switch on Press button panel Lamp switch off With a connected button panel trough the GPIO port the UMX-TPS-TX140 can be controlled from a remote location, input swithcing is available even if the transmitter mounted underdesk. In the example above there are three actions followed by a condition. When an input selector button is pressed on the remote button panel, the input port is switched to the selected one, the lamp switches off, and the projector turns on as well. Event Manager example VG -TPS-RX95 Tx up to 170m imac GPIO 12V 1 D Projection screen SRV UDIO2 IN Relay box -I IN UMX-TPS-TX140 ondition ction INPUT OUTPUT Input select switch on Screen down The projector and the rolling screen (through the Relay box) are connected to the UMX-TPS-TX140. When the user connects a laptop through to the transmitter the connected input is selected automatically the screen goes down and the projector turns on to display the connected source. 4/7

5 VG UDIO TPS Link IR Event Manager example Tx up to 170m ETHERNET VIDEO SELET INPUT STTUS VIDEO UDIO O UDIO SELET utoselect WP-UMX-TPS-TX130-US SHOW ME RESET 2 IN 3 WP-UMX-TPS- TX130-US -TPS-RX95 Projection screen VG Macook ondition ction INPUT OUTPUT Input select Press remote controller switch on Screen down Macook with DisplayPort and another laptop with VG and analog are connected to the WP-UMX-TPS-TX130-US wallplate which means there are two signals and two video signals connected. With a remote controller via IR these inputs can be switched. For example the analog of the can be mixed with the DisplayPort video of the Macook. The Event Manager helps the user to assign actions like rolling the screen down and switch the projector on when the desired input is selected. 5/7

6 Port diagram -D in ompatibility products MX Series matrix frames with MX-TPS-I or MX-TPS2-I -TPS-RX90 -H-TPS-RX95 -TPS-RX95 pplications Small classrooms onference rooms, meeting rooms ontrol rooms Home cinemas Features Digital video in Video processor IR TPS -D out Resolution: Up to 4K UHD FullHD Digital formats: Supports up to 8 channel PM, Dolby TrueHD and DTS-HD Master udio 7.1 formats Input cable equalization: utomatic max 20 m EDID emulation: Yes, dvanced EDID Management EDID memory: 120 factory preset, 15 user programmable H pass-through: Yes pass-through: Yes, configurable (control option): 9600, 19200, 38400, 57600, aud Rx,Tx (through Tx) (default: 57600) Local power: Universal power adaptor, D 12V 2.5 Power over TPS: D 48V 1 Power consumption: 8W (typ) Enclosure: 1 mm metal Dimensions: 221 W x D x 26 H mm ompliance: E Warranty: 3 years onnectors Digital video input: Digital video output: : ontrol: TPS output: Serial port: Power: -D connector connector 1 x RJ45 IR 1 x RJ45 3-pole Locking D connector (2.1 / 5.5 mm) 4K and UHD video Extends, udio IR over a single T5e...T7e cable up to 170 m distance* udio and video connectors: (input and output) ny 3D formats supported dvanced EDID Manager Event Manager 10/100 extension i-directional and IR H compliant, E, EDID transparent *Depends on cable category and quality 6/7

7 Supplied accessories PSU-12VU Universal D adaptor (Part No: ) Wall power adaptor with interchangeable plug for international use. Universal input: V, Hz, output: 12 V D, 2.5 IR emitter and IR eye (Part No: TX, RX) IR emitter is supplied with TPS-TX, IR eye is supplied with TPS-RX units. Needed for IR extension. Optional accessories Under desk mounting kit double (Part No: ) The UD-kit double makes it easy to mount multiple devices on any flat surface (e.g. furniture). Rack shelf (Part No: ) 1U high rack shelf provides mounting holes for fastening four quarter-rack sized units. Pocket sized devices can also be fastened on the shelf. 7/7