Understanding 3M Ultra Hard Metric (UHM) Connectors
|
|
- Reynold Willis
- 6 years ago
- Views:
Transcription
1 3M Electronic Solutions Division 3MUHMWEBID_ Understanding 3M Ultra Hard Metric (UHM) Connectors Enabling performance of next generation 2 mm Hard Metric systems
2 3M Electronic Solutions Division Webinar Instructions Overview Scheduled for 30 minutes including a brief Q & A at the end. Recorded for rebroadcasting at a later date.. All questions need to be sent via chat feature; Incoming phone lines are muted Selected questions will be answered in Q&A. All other questions will be answered directly via or a phone call. Promo: Flip UltraHD Video Camcorder Registered participants will need to enter the promotional code: 3MUHM in the field provided in the post webinar survey ** Only Live Event participants ts eligible e for giveaway ay **
3 3M Electronic Solutions Division Understanding 3M Ultra Hard Metric (UHM) Connectors Enabling performance of next generation 2 mm Hard Metric systems Jim Vana 3M High Speed Interconnects Applications Engineer
4 2mm Hard Metric (HM) 2mm HM is the industry s most successful backplane connector system with a strong history. It is adopted by many backplane standards. Right Angle Female Receptacle ( Socket ) Vertical Male Pin Header cpci type backplane (5-row A22, B19, B22) VME 64x backplane (5-row B19) PXI backplane (5-row A22, B22) J2 J1 J1 Backplane 3U Front Plug-in board Widely available from many connector manufacturers with a vibrant supply chain 4
5 Crosstalk One of the major problems in high-speed, high density applications is Crosstalk. Increased Noise at 7 Gbps TDR TX FEXT NEXT 5
6 The 3M TM Ultra Hard Metric (UHM) Socket Connector The UHM connector offers the ability to support high-speed differential signals in 2mm HM systems without costly backplane and daughter card re-designs. The UHM connector is a shielded d HM socket, designed to be intermateable and footprint compatible to HM sockets with superior impedance control and crosstalk reduction. 6
7 Shielding of the 3M TM Ultra Hard Metric (UHM) Socket Connector The UHM socket features individual id coaxial shielding of each signal contact. This enables orientation of differential pairs in both rows and columns. 7 Vertical Contact Shielding Horizontal Contact Shielding
8 Performance Improvement by Crosstalk reduction UHM decreased noise at 7 Gbps TX NEXT TDR FEXT Increased Noise at 7 Gbps 8
9 Example of a 2mm HM Backplane Connector System with a 3M TM Ultra Hard Metric (UHM) Socket Connector UHM Right Angle Socket / Receptacle External ground / shield wipers Typical 5-row 2 mm HM Vertical Header ( +2 ground pins version shown ) UHM internal shielding 6 th row press fit pins 9
10 Compatibility to the HM PCB-footprint The 3M TM Ultra Hard Metric (UHM) Socket Connector s internal coaxial type shielding is connected to ground on the PCB through h the f/z-row. Two options are available: Every odd pin is connected (f) or all pins are connected (f/z). f /z ( shield) e d c 2 mm 2mm b a 10 Edge of Free Board Finished hole mm
11 3M TM Ultra Hard Metric (UHM) Socket Connector Signal Integrity Testing Connectors under test... RA Socket on Daughter Card: output 3M UHM B11 connector with external wipers input Header on Backplane PCB: cpci 5+2 Vertical Press fit header 3M Test Board Materials FR406 (loss tan approx > 500MHz) 1oz (35μm) Cu 0.3mm (11.8mil) trace width Header 55mm / Socket 72mm long Total trace length 127mm (5 inches) Test Board Electrical Specifications Surfacemount SMA connectors 50 +/- 3ps (20/80%) rise time approx. 23ps (20/80%) input step to DUT approx. 29ps (20/80%) step at header All signal vias backdrilled to minimize via capacitance 11
12 Row Differential Eye Patterns at 7Gb/s Recorded Eye Diagrams (including test board) at 7Gb/s show equal performance for all rows, with an eye opening of 60% or better A B C D E 12
13 Row Differential Impedance Profile [33ps (20/80) rise time, typical for 5Gb/s] cpci Vertical Header mated to the 3M TM Ultra Hard Metric (UHM) Right Angle Socket 110 UHM Row Differential Impedance 105 e (ohms) Differential Impedanc cpci Header Vias UHM Socket UHM Socket Vias Time (ns) A23 B23 C23 D23 E23 23 ps (20%-80%) 33 ps (20%-80%) 13
14 3M TM Ultra Hard Metric (UHM) Socket Connector Row Differential Insertion Loss cpci Vertical Header mated to UHM Right Angle Socket (Excluding PCB traces, including header and socket via effects) 14
15 TDR Multi-Aggressor Crosstalk [33ps (20/80) rise time, typical for 5Gb/s] Multi-Aggressor Crosstalk 8% 7% 2 NEXT+2 Time Dom main Crosstalk (%) 6% 5% 4% TDR 3% 2% TX FEXT 1% 0% NEXT A B C D E Row 15
16 3M TM Ultra Hard Metric (UHM) Socket mated to 2mm Hard Metric Header S-parameter Model A 40-port S-parameter model has been developed for 5 row UHM connector mated to a 5+2 row Hard Metric header. CST Microwave Studio was used to create a model using a bandwidth of 30GHz. The model does not include via effects. E Row 16
17 IEC VME 64X 6U Application 2 mm Hard Metric Connectors 5 rows x 19 columns (B19) Problem: Increasing I/O throughput through P0 2 mm Hard Metric connector Solution: The 3M TM Ultra Hard Metric (UHM) Socket Connector B19 enabled 4 lanes PCI Express data link through P0 between the computer board and the carrier 17
18 cpci 3U Application Rear I/O Problem: Increasing I/O throughput through rear I/O plug in board Solution: The 3M TM Ultra Hard Metric (UHM) Socket Connector B22 enabled SATA data link through J2 connector 3U Front Plug-in board 3U Rear Plug-in board Type B 1-22pos J2 P2 rj2 Type AB 1-22pos Type A 1-25pos J1 P1 Cable I/O option 18
19 6U Application Problem: Increasing I/O throughput through rear I/O plug in board Solution: The 3M TM Ultra Hard Metric (UHM) Socket Connector B22 enabled Multi-Gigabit data links 6U Front Plug-in board 6U Rear Plug-in board Type B22 J5 P5 rp5 rj5 Type AB 22pos Type A25 J4 P4 rp4 rj4 Type A 25pos Type B19 Type B22 J3 J2 P3 P2 rp3 rj3 Type AB 19pos Cable I/O Type A25 J1 P1 19
20 3M TM Ultra Hard Metric (UHM) Product family 2 mm Hard Metric Standard Connector System 2 mm x 2 mm contact interface 5 row: 2 mm x 2 mm PCB footprint (A, B, CL,CR, AB) 8 row: 1.5 mm x 2 mm PCB footprint (D, E, FL, FR, DE) Impedance Matched 50 Ω Single-Ended 100 Ω Differential Low Crosstalk <7% Multi aggressor when mated with Unshielded 2mm T r =33ps for typical configurations; UHM Socket alone has significantly less Crosstalk Press-fit sockets are designed to be intermateable to 2mm Hard Metric headers designed to IEC Press-fit sockets are PCB footprint compatible with 2mm Hard Metric Sockets
21 Outlook The 3M TM Ultra Hard Metric (UHM) Socket Connectors, 5- row and 8-row, are available today. UHM B22 socket is currently defined in next generation CompactPCI PICMG 2.30 Standard Draft to support Multi-Gigabit I/O ( 3M work group member ) Work is ongoing on a UHM header for further increased system performance with the same design goals and philosophy: to have internal shielding for higher performance and optimum ground connection, but still be foot print compatible to 5+2 HM headers. 21
22 For more information. Please visit for Tech Datasheets 3D models Sample orders White papers Product news And more.. 22
23 Important Notice The information we are furnishing you is being provided free of charge and is based on tests performed at 3M laboratory facilities or by our suppliers. While we believe that these test results are reliable, their accuracy or completeness is not guaranteed. Your results may vary due to differences in test types and conditions. This information is intended for use by persons with the knowledge and technical skills to analyze, handle and use such information. You must evaluate and determine whether the product is suitable for your intended application. The foregoing if information is provided d AS-IS. In providing this information 3M makes no warranties regarding product use or performance, including any implied warranty of merchantability or fitness for a particular use. For Product warranty information, please see Product Literature. 3M is a trademark of 3M Company. All other trademarks are the property of their respective owners. 23
24 3M Electronic Solutions Division Question & Answer Session 1. What is PICMG? 2. When will PICMG 2.30 draft standard d be released as final? 3. What are expected to be the most common applications driven by next generation CompactPCI? 4. Can UHM connector be used for Single-end transmission as well? 24 3M All Rights Reserved.
25 3M Electronic Solutions Division Closing Comments Link to webinar recording will be available on 3M s websites Remember to enter the promotional code: 3MUHM in the field provided in the post webinar survey 25 3M All Rights Reserved.
26 3M Electronic Solutions Division Thank you for your attention. 26 3M All Rights Reserved.
Thank you for downloading this product training module produced by 3M Electronic Solutions Division for Mouser. In this presentation, we will discuss
1 Thank you for downloading this product training module produced by 3M Electronic Solutions Division for Mouser. In this presentation, we will discuss a new 2mm hard metric connector that has been designed
More informationI N T E R C O N N E C T A P P L I C A T I O N N O T E. STEP-Z Connector Routing. Report # 26GC001-1 February 20, 2006 v1.0
I N T E R C O N N E C T A P P L I C A T I O N N O T E STEP-Z Connector Routing Report # 26GC001-1 February 20, 2006 v1.0 STEP-Z CONNECTOR FAMILY Copyright 2006 Tyco Electronics Corporation, Harrisburg,
More informationReport # 20GC004-1 November 15, 2000 v1.0
I N T E R C O N N E C T A P P L I C A T I O N N O T E Z-PACK HS3 Connector Routing Report # 20GC004-1 November 15, 2000 v1.0 Z-PACK HS3 6 Row 60 Position and 30 Position Connectors Copyright 2000 Tyco
More informationGT Micro D High Speed Characterization Report For Differential Data Applications. Micro-D High Speed Characterization Report
GT-14-19 Micro D For Differential Data Applications GMR7580-9S1BXX PCB Mount MWDM2L-9P-XXX-XX Cable Mount Revision History Rev Date Approved Description A 4/10/2014 C. Parsons/D. Armani Initial Release
More informationHigh Speed and High Power Connector Design
High Speed and High Power Connector Design Taiwan User Conference 2014 Introduction High speed connector: Electrically small Using differential signaling Data rate >100Mbps High power connector: Static
More informationI N T E R C O N N E C T A P P L I C A T I O N N O T E. Z-PACK TinMan Connector Routing. Report # 27GC001-1 May 9 th, 2007 v1.0
I N T E R C O N N E C T A P P L I C A T I O N N O T E Z-PACK TinMan Connector Routing Report # 27GC001-1 May 9 th, 2007 v1.0 Z-PACK TinMan Connectors Copyright 2007 Tyco Electronics Corporation, Harrisburg,
More informationI N T E R C O N N E C T A P P L I C A T I O N N O T E. Advanced Mezzanine Card (AMC) Connector Routing. Report # 26GC011-1 September 21 st, 2006 v1.
I N T E R C O N N E C T A P P L I C A T I O N N O T E Advanced Mezzanine Card (AMC) Connector Routing Report # 26GC011-1 September 21 st, 2006 v1.0 Advanced Mezzanine Card (AMC) Connector Copyright 2006
More informationAn Adaptable Test Socket Concept that Meets Both the Test and Burn-In Needs of 21st Century Array Packages
An Adaptable Test Socket Concept that Meets Both the Test and Burn-In Needs of 21st Century Array Packages Alexander Barr, 3M, awbarr@mmm.com Akihiko Furuta, Sumitomo 3M, Masahiko Kobayashi, Sumitomo 3M,
More informationModeling of Connector to PCB Interfaces. CST User Group Meeting, September 14, 2007 Thomas Gneiting, AdMOS GmbH
Modeling of Connector to PCB Interfaces CST User Group Meeting, September 14, 2007 Thomas Gneiting, AdMOS GmbH thomas.gneiting@admos.de Table of Content Introduction Parametric CST model of connector to
More informationSTRADA WHISPER. Backplane Connector DATA COMMUNICATIONS /// STRADA WHISPER BACKPLANE CONNECTOR
STRADA WHISPER Backplane Connector INTRODUCING STRADA Whisper Backplane Connector Blinding Speeds The STRADA Whisper backplane family was designed with your end customer s need for high-performing, high-bandwidth
More informationhm connectors ept GmbH & Co. KG I Phone +49 (0) 88 61/ I Fax +49 (0) 88 61/55 07 I I
26 Definitions 28 Technical specifications 29 Electrical properties 30 Cross talk 31 Hole specifications 32 System modularity 33 Pin lengths 34 Notes 35 hm 2.0 type A 36 hm 2.0 type B25 38 hm 2.0 type
More informationI N T E R C O N N E C T A P P L I C A T I O N N O T E. STRADA Whisper 4.5mm Connector Enhanced Backplane and Daughtercard Footprint Routing Guide
I N T E R C O N N E C T A P P L I C A T I O N N O T E STRADA Whisper 4.5mm Connector Enhanced Backplane and Daughtercard Footprint Routing Guide Report # 32GC001 01/26/2015 Rev 3.0 STRADA Whisper Connector
More informationMillipacs 2mm Hard Metric Connector Selector Guide
Millipacs 2mm Hard Metric Connector Selector Guide Millipacs product family offers 2mm modular Boardto-Board and Cable-to-Board backplane connector solutions. Millipacs product range include low speed
More informationCompactPCI PowerConnector
CompactPCI PowerConnector Table of Contents 1 Introduction............................................................. 2 Product Features......................................................... 3 Performance
More informationPCI Express Gen 4 & Gen 5 Card Edge Connectors
PCI Express Gen 4 & Gen 5 Card Edge Connectors Product Presentation Amphenol Information Communications ava and Commercial Products Agenda 1. Value Proposition 2. Product Overview 3. Signal Integrity Performance
More informationAirMax VSe High Speed Backplane Connector System
AirMax VSe High Speed Backplane Connector System July 2012 FCI Customer Presentation For External Use Where will AirMax VSe connectors be used & Why? More bandwidth density is being demanded from equipment
More informationMILLIPACS 2MM HARD METRICS SERIES - RIGHT ANGLE HEADER CONNECTORS
BACKPLANE CONNECTORS MILLIPACS 2MM HARD METRICS SERIES - Milipacs Hard Metric Right Angle header Modules are available in all popular versions - Type A, B, C, B19, B22, AB22 and AB25 with shielding row
More informationDesigning the Right Ethernet Interconnect to Increase High-Speed Data Transmission in Military Aircraft. White Paper
Designing the Right Ethernet Interconnect to Increase High-Speed Data Transmission in Military Aircraft White Paper May 216 Abstract: Designing the right high-speed Interconnect that enables systems to
More informationElma Bustronic CompactPCI Reference Sheet
Elma Bustronic CompactPCI Reference Sheet Rev. 4 5.10.10 The cpci reference sheet provides relevant reference material for the CompactPCI product line. The information provided may change at anytime. Elma
More informationRevolutionary High Performance Interconnect Which Maximizes Signal Density
Revolutionary High Performance Interconnect Which Maximizes Signal Density Tom Cohen and Gautam Patel Teradyne Connection Systems 44 Simon St. Nashua, New Hampshire 03060 Phone: 603-791-3383, 603-791-3164
More informationHigh Speed Characterization Report. DVI-29-x-x-x-xx Mated With DVI Cable
High Speed Characterization Report DVI-29-x-x-x-xx Mated With DVI Cable REVISION DATE: 07-18-2004 TABLE OF CONTENTS Introduction... 1 Product Description... 1 Overview... 2 Results Summary... 3 Time Domain
More informationQ2 QMS/QFS 16mm Stack Height Final Inch Designs In PCI Express Applications Generation Gbps. Revision Date: February 13, 2009
Q2 QMS/QFS 16mm Stack Height Final Inch Designs In PCI Express Applications Generation 2 5.0 Gbps Revision Date: February 13, 2009 Copyrights and Trademarks Copyright 2009 Samtec, Inc. Developed in conjunction
More informationUsing RJ45 Category 7 Cabling for 2 Lane, 1 and 2.5Gbps Serial Data Transmission
Using RJ45 Category 7 Cabling for 2 Lane, 1 and 2.5Gbps Serial Data Transmission Test 8561 (Category 7, 2 lane) J Sawdy, Sr. SI Engineer 4/14/10 Forward The RJ45 connector is found in enterprise installations
More informationEXAMAX HIGH SPEED BACKPLANE CONNECTOR SYSTEM Innovative pinless connector system delivering superior electrical performance at speeds 25 to 56Gb/s
EXAMAX HIGH SPEED BACKPLANE Innovative pinless connector system delivering superior electrical performance at speeds 5 to 5Gb/s SUPPORTS MANY INDUSTRY STANDARD SPECIFICATIONS; MIGRATION PATH TO HIGHER
More informationE L E C T R I C A L A N A L Y S I S R E P O R T. Use of Z-PACK 2mm HM for Fibre Channel Applications Application Note #20GC001-1 March 13, 2000
E L E C T R I C A L A N A L Y S I S R E P O R T Use of Z-PACK 2mm HM for Fibre Channel Applications Application Note #20GC001-1 March 13, 2000 Copyright 2000 AMP Incorporated, Harrisburg, PA All Rights
More informationcpci Series (2mm) Connectors
cpci Series (2mm) s Interchangeable with cpci COTS Systems Hi-Rel and Space Grade Versions Standard 2mm Footprint of cpci PICMG 2.0 Immune to Shock and Vibration LCP Insulator meets NASA Outgassing Requirements
More informationKeysight MOI for USB Type-C Cable Assemblies Compliance Tests Using Keysight M937XA Multiport PXIe VNA
Revision 1.01 Feb-24, 2017 Universal Serial Bus Type-C TM Specification Revision 1.1 Keysight Method of Implementation (MOI) for USB Type-C TM Cables Assemblies Compliance Tests Using Keysight For Type-C
More informationRiseUp RU8-DP-DV Series 19mm Stack Height Final Inch Designs in PCI Express Applications. Revision Date: March 18, 2005
RiseUp RU8-DP-DV Series 19mm Stack Height Final Inch Designs in PCI Express Applications Revision Date: March 18, 2005 Copyrights and Trademarks Copyright 2005 Samtec, Inc. Developed in conjunction with
More informationQ Pairs QTE/QSE-DP Final Inch Designs In PCI Express Applications 16 mm Stack Height
Application Note Q Pairs QTE/QSE-DP Final Inch Designs In PCI Express Applications 16 mm Stack Height Copyrights and Trademarks Copyright 2004 Samtec, Inc. Developed in conjunction with Teraspeed Consulting
More informationV.6-17 Colibri for COM Express
V.6-17 Colibri for COM Express 0.5 mm SMT Board-to-Board Connector System Introduction Colibri 0.5 mm SMT for 10+ Gbit/s Applications Connectors for COM Express Key Features: Termination ept s Colibri
More informationEasyCable CompactPCI Backplane
Description The Elma Bustronic CompactPCI backplane series is designed to be fully compliant with PICMG standards. The EasyCable line features power nuts along the side of the backplane for easy and convenient
More informationV.5/17. Connectors. product overview. Edition 5
V.5/17 Connectors product overview Edition 5 Editorial Good connections bear a name: ept Thomas Bernhard Claus Guglhör Guglhör Guglhör ept designs, produces and distributes electronic connectors for highquality
More informationUsing ADS to Post Process Simulated and Measured Models. Presented by Leon Wu March 19, 2012
Using ADS to Post Process Simulated and Measured Models Presented by Leon Wu March 19, 2012 Presentation Outline Connector Models From Simulation Connector Models From Measurement The Post processing,
More informationMillipacs 2mm Hardmetric Product Presentation
Millipacs 2mm Hardmetric Product Presentation Sep 2014 Millipacs Overview Millipacs is a 2.00 mm modular board to board or cable to board Interconnection system in hardmetric configuration designed in
More informationAmphenol ABSI VME64x Datasheet
Amphenol ABSI VME64x Backplanes Amphenol ABSI s VME64x high performance backplanes are available in both 3U & 6U form factors. All VME backplanes are compliant to VITA VME64x specifications. ABSI can customize
More informationExaMAX High Speed Backplane Connector System Innovative pinless connector system delivering superior electrical performance at speeds 25Gb/s to 56Gb/s
Innovative pinless connector system delivering superior electrical performance at speeds 5Gb/s to 5Gb/s SUPPORTS MANY INDUSTRY STANDARD SPECIFICATIONS; MIGRATION PATH TO HIGHER BANDWIDTH APPLICATIONS ExaMAX
More informationMDI for 4x25G Copper and Fiber Optic IO. Quadra (CFP4 proposal) Connector System
MDI for 4x25G Copper and Fiber Optic IO Quadra (CFP4 proposal) Connector System Nov 7, 2011 Nathan Tracy, TE Connectivity Tom Palkert, Molex 4x25Gb/s MDI Potential Requirements Critical Needs: Excellent
More informationSPECIFICATION AND PERFORMANCE CHARACTERISTICS OF DVI MALE AND FEMALE CONNECTOR SERIES
SPECIFICATION AND PERFORMANCE CHARACTERISTICS OF DVI MALE AND FEMALE CONNECTOR SERIES CIRCUIT ASSEMBLY CORP. 18 THOMAS STREET, IRVINE, CA 92618-2777 Page No. 1 CONTENTS CLAUSE PAGE 1.0 SCOPE.. 3 2.0 APPLICABLE
More informationPCIe on 3U and 6U CompactPCI Mark Wetzel Principal Engineer National Instruments
Copyright 2005, PCI-SIG, All Rights Reserved 1 PCIe on 3U and 6U CompactPCI Mark Wetzel Principal Engineer National Instruments Copyright 2005, PCI-SIG, All Rights Reserved 2 Agenda Overview of CompactPCI
More information2.0 Connector System IEC Definition of Terms Contact length of the rear and front mating area Connector according to IEC
Definition of Terms Connector according to The hardmetric connector system ept-hm 2.0 was developed according to the international standard. As a result, a worldwide standard for the combination of PCBs
More informationCEI-28G-VSR Channel Simulations, Validation, & Next Steps. Nathan Tracy and Mike Fogg May 18, 2010
CEI-28G-VSR Channel Simulations, Validation, & Next Steps Nathan Tracy and Mike Fogg May 18, 21 Summary of Contribution Updated information showing Tyco Electronics 25/28Gbps first generation modular interconnect
More informationDesign Test Deploy
Design Test Deploy 9-22-10 www.meritec.com 0142835 Table of Contents Overview2 Housing4-7 Hardware8-10 Wafers11-13 Wafer-Wafer Cables14-18 Wafer-I/O19-21 The 3 Dimensions of 22-25 Off-the-Shelf Product
More informationAgilent Bead Probe Technology
Agilent Bead Probe Technology Page 1 Abstract Lead-free, shrinking geometries, new packages and high-speed signaling present new challenges for ICT. The impact will be more defects, loss of access, lower
More information07. har-link Interface Connectors
. Interface Connectors The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
More informationConnectors. product catalog no. 26
Connectors product catalog no. 26 ept GmbH I Tel. +49 (0) 88 61 / 25 01 0 I Fax +49 (0) 88 61 / 55 07 I E-Mail sales@ept.de I www.ept.de Product Groups Overview Explanation of Symbols Termination Application
More informationDesign Test Deploy
Design Test Deploy 9-22-10 www.meritec.com 0142835 Table of Contents Overview2 Housing4-7 Hardware8-10 Wafers11-13 Wafer-Wafer Cables14-18 Wafer-I/O19-21 The 3 Dimensions of 22-25 Off-the-Shelf Product
More informationApplication Specification
1 of 22 C Millipacs HM 5 & 8 Row Header & Shrouds Application Specification 2 of 22 C TABLE OF CONTENTS 1. PURPOSE... 4 2. SCOPE... 4 3. GENERAL... 4 3.1. Method of Specifying... 4 3.2. Workmanship...
More informationHigh Speed Backplane Connectors. Catalog Issued 4-05
Catalog 773095 Issued 4-05 2 Disclaimer While Tyco Electronics has made every reasonable effort to ensure the accuracy of the information in this catalog, Tyco Electronics does not guarantee that it is
More informationAgilent Technologies Advanced Signal Integrity
Agilent Technologies Advanced Signal Integrity Measurements for Next Generation High Speed Serial Standards Last Update 2012/04/24 (YS) Appendix VNA or TDR Scope? ENA Option TDR Overview USB 3.0 Cable/Connector
More informationcpci SERIES Ruggedized cpci (2 mm) Connectors
cpci SERIES Ruggedized cpci (2 mm) Connectors Hyperboloid Technology Smiths Connectors offers an extensive range of superior contact technologies suitable for standard and custom solutions. Hypertac (HYPERboloid
More informationColibri for COM Express. 0.5 mm SMT Board-to-Board Connector System
V. 01/18 for COM Express 0.5 mm SMT Board-to-Board Connector System Singel 3 B-2550 Kontich Belgium Tel. +32 (0)3 458 30 33 info@alcom.be www.alcom.be Rivium 1e straat 52 2909 LE Capelle aan den Ijssel
More informationQPairs QTE/QSE-DP Multi-connector Stack Designs In PCI Express Applications 16 mm Connector Stack Height REVISION DATE: OCTOBER 13, 2004
Application Note QPairs QTE/QSE-DP Multi-connector Stack Designs In PCI Express Applications 16 mm Connector Stack Height REVISION DATE: OCTOBER 13, 2004 Copyrights and Trademarks Copyright 2004 Samtec,
More information2mm PITCH METRIC CONNECTORS FOR PCB CONNECTION
mm PITCH METRIC CONNECTORS FOR PCB CONNECTION FCN-86 /87 SERIES OVERVIEW Fujitsu s mm hard metric connector F-PACK-3 (FCN-86/87 series) are connectors for connecting boards developed to support high-speed
More informationBoard Mount Connector Footprint Design Process
Board Mount Connector Footprint Design Process STEP 1: Connector Selection Series Force to Engage (Max) Max SB LD FD Freq. SMP 2.0 lbs 10 lbs 15 lbs 40 GHz SMPM 3.5 lbs N/A 8.0 lbs 65 GHz SMPS 3.0 lbs
More information07. har-link Interface Connectors
. Interface Connectors The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
More informationTB Paladin Connector Design Guidelines. Revision A
Paladin Connector Design Guidelines Specification Revision Status Revision SCR No. Description Initial Date A S5664 New Release J.Dunham 4/4/17 Table of Contents Specification Revision Status... 1 1 Introduction...
More informationApplication Note. PCIE-RA Series Final Inch Designs in PCI Express Applications Generation GT/s
PCIE-RA Series Final Inch Designs in PCI Express Applications Generation 3-8.0 GT/s Copyrights and Trademarks Copyright 2012, Inc. COPYRIGHTS, TRADEMARKS, and PATENTS Final Inch is a trademark of, Inc.
More informationTCA connectors. ept GmbH & Co. KG I Phone +49 (0) 88 61/ I Fax +49 (0) 88 61/55 07 I I
10 ept GmbH & Co. KG I Phone +49 (0) 88 61/25 01 0 I Fax +49 (0) 88 61/55 07 I E-mail sales@ept.de I www.ept.de 11 Definitions AdvancedTCA /MicroTCA To give consideration to increasing data traffic and
More informationSEAM-RA/SEAF-RA Series Final Inch Designs in PCI Express Applications Generation GT/s
SEAM-RA/SEAF-RA Series Final Inch Designs in PCI Express Applications Generation 3-8.0 GT/s Copyrights and Trademarks Copyright 2011 Samtec, Inc. Developed in conjunction with Teraspeed Consulting Group
More information07. har-link INTERFACE CONNECTORS
. INTERFACE CONNECTORS The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
More information3M Connectors for Embedded Systems Connectors for AdvancedTCA, CompactPCI and MicroTCA Systems from 3M
3M Connectors for Embedded Systems Connectors for AdvancedTCA, CompactPCI and MicroTCA Systems from 3M 3M 2011. All Rights Reserved. Introduction Purpose To explain the features and benefits of the connectors
More informationSPICE Model Validation Report
EQCD (DV to DV) Cable Assembly Mated with: QTE-xxx-01-x-D-A QSE-xxx-01-x-D-A Description: Cable Assembly, High Data Rate, 0.8mm Pitch Samtec, Inc. 2005 All Rights Reserved TABLE OF CONTENTS INTRODUCTION...
More informationChannels for Consideration by the Signaling Ad Hoc
Channels for Consideration by the Signaling Ad Hoc John D Ambrosia Tyco Electronics Adam Healey, Agere Systems IEEE P802.3ap Signaling Ad Hoc September 17, 2004 Two-Connector Topology N2 H B September,
More informationSolder tail tin lead (60-40) per Mil-P Contact spacing. 125 signal 25 ground (top shield) Contact current rating. 95 signal 19 ground
HYPERTAC 2MM 2mm Connectors Interchangeable with cpci COTS Systems Hypertac contacts provide high reliability Standard 2mm footprint Immune to shock & vibration High-temp LCP insulator meets NASA outgassing
More informationA Design of Experiments for Gigabit Serial Backplane Channels
DesignCon 2008 A Design of Experiments for Gigabit Serial Backplane Channels Mr. Jack Carrel, Xilinx jack.carrel@xilinx.com (972) 246-0239 Mr. Bill Dempsey, Redwire Enterprises billd@redwireenterprises.com
More information2mm PITCH METRIC CONNECTORS FOR PCB CONNECTION
2mm PITCH METRIC CONNECTORS FOR PCB CONNECTION FCN-086 /087 SERIES OVERVIEW Fujitsu s 2mm hard metric connector F-PACK-3 (FCN-086/087 series) are connectors for connecting boards developed to support high-speed
More information100BASE-T1 EMC Test Specification for ESD suppression devices
IEEE 100BASE-T1 EMC Test Specification for ESD suppression devices Version 1.0 Author & Company Dr. Bernd Körber, FTZ Zwickau Title 100BASE-T1 EMC Test Specification for ESD suppression devices Version
More informationTHE NEXT-GENERATION INTEROPERABILITY STANDARD
THE NEXT-GENERATION INTEROPERABILITY STANDARD ABOUT OPEN VPX TM Open VPX TM is the next-generation interoperability standard for system-level defense and aerospace applications. It is ideal for rugged
More informationPCIEC PCI Express Jumper High Speed Designs in PCI Express Applications Generation GT/s
PCIEC PCI Express Jumper High Speed Designs in PCI Express Applications Generation 3-8.0 GT/s Mated with PCIE-RA Series PCB Connectors Copyrights and Trademarks Copyright 2015, Inc. COPYRIGHTS, TRADEMARKS,
More informationArea Array Probe Card Interposer. Raphael Robertazzi IBM Research 6/4/01. 6/4/01 IBM RESEARCH Page [1]
Area Array Probe Card Interposer Raphael Robertazzi IBM Research 6/4/01 6/4/01 IBM RESEARCH Page [1] Motivation: Outline Probe Cards for Testing Complex ICs in the Developmental Stage. Hand Wired Space
More informationCompactPCI Serial SBX-DUB
Product Information CompactPCI Serial SBX-DUB 6 Port.0 Hostadapter Document No. 706 6 September 206 SBX-DUB SBX-DUB CompactPCI Serial 6 Port.0 Hostadapter General The SBX-DUB is a peripheral slot board
More informationMolex s family of high-speed Micro SAS Connectors featuring the Dual-stack Receptacle with Pin Cover
Design-enhanced Micro SAS connectors now include dual-drive stacked receptacles with an integrated ground plane and a protective pin cover for greater reliability in compact storage applications Molex
More informationPXI The PXI-8210 is a Fast Ethernet/Ultra Wide SCSI interface for the PXI/CompactPCI bus.
INSTALLATION GUIDE PXI -8210 The PXI-8210 is a Fast Ethernet/Ultra Wide SCSI interface for the PXI/CompactPCI bus. Contents Hardware Overview...2 PXI-8210 Features...2 SCSI-3 Specification...2 Connectivity...3
More information1999 High Performance Systems Design Conference
ON99. 1999 High Performance Systems Design Conference 66 MHz Simulation Goal ON9999 As many slots as possible while maintaining system reliability! 66 MHz CompactPCI Considerations Complete Compatibility
More informationPI2EQX6874ZFE 4-lane SAS/SATA ReDriver Application Information
Contents General Introduction How to use pin strap and I2C control External Components Requirement Layout Design Guide Power Supply Bypassing Power Supply Sequencing Equalization Setting Output Swing Setting
More informationHardware Specification Revision 2.2 ECN 1. Revision 1.0 June 13, 2005
-1 Hardware Specification Revision 2.2 ECN 1 Revision 1.0 June 13, 2005 IMPORTANT INFORMATION Copyright Copyright 1997-2005 PXI Systems Alliance. All rights reserved. This document is copyrighted by the
More informationKeysight N7015A/16A Type-C Test Kit. User Guide
Keysight N7015A/16A Type-C Test Kit User Guide Notices Keysight Technologies 2015, 2016 No part of this manual may be reproduced in any form or by any means (including electronic storage and retrieval
More informationAPPLICATION SPECIFICATION. 1 of 22 B Millipacs HM 5 and 8 Row Right Angle Signal Receptacles Millipacs HM Right Angle Headers
1 of 22 B Millipacs HM 5 & 8 Row Receptacle & Right Angle Header Application Specification MPACS 5R RA RCP MPACS 8R RA RCP MPACS 5R RA HDR TABLE OF CONTENTS 2 of 22 B 1. OBJECTIVE...3 2. SCOPE...3 3. GENERAL...3
More informationERmet ZDplus.
www.erni.com Katalog Catalog D E XXXXXX 07458 Ausgabe 09/3 3, 03/05 www.erni.com Edition 4 www.erni.com Catalog E XXXXXX 09/3 Edition 4 The ERmet ZDplus connector is an enhancement of the ERmet ZD family.
More informationHigh Speed, Controlled Impedance Two-Piece Connectors (MICTOR, Micro-Strip and STEP-Z Interconnection Systems) Catalog Revised 8-04
High Speed, Controlled Impedance Two-Piece Connectors (MICTOR, Micro-Strip and STEP-Z s) Catalog 6594 Revised 8-04 High Speed Stacking Connectors (Parallel and Right-ngle Board-to-Board) Stacking Height
More informationFrequently Asked Questions (FAQs) Siemon 10G ip Solutions
Frequently Asked Questions (FAQs) Siemon 10G ip Solutions The world of enterprise cabling is evolving rapidly. Emerging, high-bandwidth services and the adoption of higher speed Ethernet standards, like
More informationAn Innovative Simulation Workflow for Debugging High-Speed Digital Designs using Jitter Separation
An Innovative Simulation Workflow for Debugging High-Speed Digital Designs using Jitter Separation C. Chastang, A. Amédéo V. Poisson, P. Grison, F. Demuynck C. Gautier, F. Costa Thales Communications &
More informationEDA365. DesignCon Impact of Backplane Connector Pin Field on Trace Impedance and Vertical Field Crosstalk
DesignCon 2007 Impact of Backplane Connector Pin Field on Trace Impedance and Vertical Field Crosstalk Ravi Kollipara, Rambus, Inc. ravik@rambus.com, (650) 947-5298 Ben Chia, Rambus, Inc. Dan Oh, Rambus,
More informationINSTITUTO DE PLASMAS E FUSÃO NUCLEAR
ATCA-PTSW-AMC4 Technical Manual INSTITUTO DE PLASMAS E FUSÃO NUCLEAR October 29, 2013 Authored by: M. Correia ATCA-PTSW-AMC4 Technical Manual Document Configuration COMPANY AUTHORS IPFN/IST- instituto
More informationCompuScope 3200 product introduction
CompuScope 3200 product introduction CompuScope 3200 is a PCI bus based board-level product that allows the user to capture up to 32 bits of singleended CMOS/TTL or differential ECL/PECL digital data into
More informationInterconnect Solutions for Semiconductor Designs
Interconnect Solutions for Semiconductor Designs FEBRUAR 2006 High Speed Interconnect Solutions Overview Samtec s Signal Integrity expertise and interconnect solutions are ideal for many of the physical
More informationApplication Note 1242
HFBR-5701L/5710L/5720L/5730L and HDMP-1687 Reference Design for 1.25 GBd Gigabit Ethernet and 1.0625 GBd Fiber Channel Applications Application Note 1242 Introduction Avago s objective in creating this
More information3M Twin Axial Cable Assembly for Medical Electronics Packaging
3M Electronic Solutions Division 3M Twin Axial Cable Assembly for Medical Electronics Packaging Charlie Staley MEPTEC September 2012 Risers Cards and Extender Cables Sometimes system mechanical configurations
More informationFiltered Combo D-Subminiature Connectors
Filtered Combo D-Subminiature Connectors Spectrum s line of filtered combo D-subs provide high insertion loss with tubular capacitive filtering. These connectors are available with 20 Amp power contacts,
More informationMicro Twinax Quick Disconnect NDL Size Package
Micro Twinax Quick Disconnect NDL Size Package Micro Twinax Quick Disconnect NDL Plug 100 and 150 Ohm WAY 014034-2049 100 Differential Twinax 540-1153-000 014034-2050 100 Flexible Twinax 540-1161-000 Ø.250
More informationMECT Series Final Inch Designs in SFP+ Applications. Revision Date: August 20, 2009
MECT Series Final Inch Designs in SFP+ Applications Revision Date: August 20, 2009 Copyrights and Trademarks Copyright 2009 Samtec, Inc. Developed in conjunction with Teraspeed Consulting Group LLC COPYRIGHTS,
More informationMIPI D-PHY REFERENCE TERMINATION BOARD (RTB) OVERVIEW AND DATASHEET
The InterOperability Laboratory MIPI D-PHY REFERENCE TERMINATION BOARD (RTB) OVERVIEW AND DATASHEET Abstract: This document serves as the primary documentation for the MIPI D-PHY Reference Termination
More informationDYNAMIC ENGINEERING 150 DuBois St. Suite 3, Santa Cruz Ca Fax Est
DYNAMIC ENGINEERING 150 DuBois St. Suite 3, Santa Cruz Ca. 95060 831-457-8891 Fax 831-457-4793 sales@dyneng.com www.dyneng.com Est. 1988 User Manual CPCI-J2-SCSI CPCI User IO for 3U J2 SCSI connector Rear
More informationXilinx Personality Module (XPM) Interface Specification
Xilinx Personality Module (XPM) Interface Specification For RocketIO MGT and LVDS Access R Xilinx is disclosing this Specification to you solely for use in the development of designs to operate on Xilinx
More informationModels 1417 and 1437 User s Manual. High-Speed Photodetector Modules
Models 1417 and 1437 User s Manual High-Speed Photodetector Modules Handling Precautions The detector is sensitive to electrostatic discharges and could be permanently damaged if subjected even to small
More informationSpecification and Design Guide
Specification and Design Guide Revision 1.00 May, 2011 Revision Date Comment 0.71 11/20/2009 Pre-release 0.8 12/1/2009 Initial release version 0.81 1/16/2010 Update finger drawings; remove LPC bus 0.82
More information100GbE Architecture - Getting There... Joel Goergen Chief Scientist
100GbE Architecture - Getting There... Joel Goergen Chief Scientist April 26, 2005 100GbE Architecture - Getting There Joel Goergen Force10 Networks joel@force10networks.com Subject : 100GbE Architecture
More informationThis front connection is composed of: 1. Right Angle Male Connector 2. Cable Connector Female
This specification covers the requirements for the application of Z PACK 2 mm HM Interconnection System for Board to Board Connections and provides information on the standard modules (Types A, B, C, A/B,
More information10/100 Application Note General PCB Design and Layout Guidelines AN111
10/100 Application Note General PCB Design and Layout Guidelines AN111 Introduction This application note provides recommended guidelines in designing a product that complies with both EMI and ESD standards
More informationApplication Note. PCIE-EM Series Final Inch Designs in PCI Express Applications Generation GT/s
PCIE-EM Series Final Inch Designs in PCI Express Applications Generation 3-8.0 GT/s Copyrights and Trademarks Copyright 2015, Inc. COPYRIGHTS, TRADEMARKS, and PATENTS Final Inch is a trademark of, Inc.
More information