Sub-Station Station. Secondary Sub. Sub- Distribution. Network. Distribution Panel. Distribution. Panel

Transcription

1 DLC-200 BOX Mini-RTU for Multi Utility and Pipeline Purposes Our strength Low Cost Your benefit! High Performance Only a few types of different modules Simplified cost-effective spares inventory and modular construction for high flexibility) High performance central processing unit with 32- bit processor and multiple interfaces High processing capacity and flexibility Integrated power supply with wide-range input Flexible power supply for the device Support of standard transmission protocols Communication with many different kinds of control- and sub-systems Real-time acquisition with GPS receiver Precise analysis of network incidents, system- wide Parameters can be set locally or remotely during operation Easy adaptation to system modifications User-oriented programming and testing system based on a PC Up-to-date, easy to handle and self- documenting Linux operating system Open, safe, stable and low cost Aluminium case Robust, mountable on DIN rails Management Level Host Sub-Station Station Level Sub- Station DLC-200 Master Gateway Level Secondary Sub DLC-200 Gateway Network Device Level Panel Panel DLC-100 Box iad GmbH Gesellschaft für Informatik, Automatisierung und Datenverarbeitung mbh Unterschlauersbacher Hauptstr. 10 D Großhabersdorf Tel. +49 (0) , Fax +49 (0) info@iad-de.com Universal scalable communication gateway controller (Ethernet, CAN, USB 1.1, ISDN, M-Bus, RS232/RS485, EN (IEC1107),...)

2 DLC-200 BOX C-2BC-2BC-2BC-2BC-2B The is an intelligent stand alone telecontrol device with multiple interfaces. The architecture of the is designed in such a way that, thanks to its modularity and flexibility, it can be adapted to the conditions and sizes of the different stations. It is also open for later extensions of virtually any type. The device is capable of collecting data from many different sources in numerous ways and to control remote operations with its digital I/O s. Raw data can be processed by a powerful 32-Bit RISC Microcontroller before being send to any other system via the integrated communication interfaces. Application and System Telecontrol Application. The main task of an RTU is carried out in the telecontrol component. The DLC- 200 Box supports all the main functions that are needed for the process signals. Each process signal is operated by the according to the configured parameters and functions. Communication. The has a highly flexible capacity for adaption to telecontrol communication protocols. It is also able to communicate with different hierarchical levels of a network control system. System concept. The software and hardware concept is based on modularity. All field wiring is terminated into removable connectors so that if a device ever needs replacement the wiring is not disturbed. General Features Highly adaptable to a wide range of use through three different combinations of modules. High end variant with DLC-200 PLM, DLC-200 HCB32M and module for a maximum need of interfaces Low end variant with DLC-200 PLM and DLC- 200 HCB32M module for power-line communication purposes Low end variant with DLC-200 HCB32M and modules for purposes without power-line communication Interface System connector with CPU and GIO interface used to interconnect the modules Power supply Integrated power supply with wide range AC voltage input or dedicated DC voltage input. Connectors Use of standard Interface connectors provides easy and fast connection to the device interfaces and power supply. Case Dedicated robust aluminium case mountable on standard DIN rails Power. With its integrated power supply containing a wide-range input and a powerfail detection the only requirement for operation is a power supply point. Design and quality components along with flexible power options, accuracy, and user configurability provide exceptional reliability.

3 The Modules DLC-200 HCB32M Processor Module HyNet32XS 32-Bit RISC processor Memory Working memory: max. 2 banks SDRAM, up to 256 MByte Program memory: Flash up to 64 MByte nvsram for storing of data that have to be existent even on a suddenly power loss 2x Ethernet 10BaseT/100BaseTX electrical or 100BaseFX optical variant. 2x RS232/RS485, mode selectable by software control CAN-Bus, fully compliant with the ISO standard, high speed and low speed mode USB compliant with the USB specification 1.1, device mode ISDN in operating modes NT or TE, full duplex 2B + D S/T interface according to ITU-T I,430 3 x EN (IEC1107) metering interface M-Bus Master metering interface Smartcard Reader for standard SIM-cards compliant to ISO 7816 standard Module 8-Bit Microcontroller Memory Working memory: SRAM 128k 4x digital outputs 8x digital inputs 4x analog inputs telecontrol bus master wide range bus plug-in module interface for GSM module Modem module ISDN module Ethernet module DLC-200 PLM Power-Line Modem Module 2-wire power-line interface for single phase coupling (9 khz 500 khz) external AMO interface for connection of an amplifier module that provides 3- phase coupling (4 khz 500 khz) Power supply Wide range input for AC supply voltages or dedicated DC supply voltages. Buffer and power loss detection.

4 Technical Data Processor - 32-Bit RISC/DSP processor Memory DLC-200 HCB32M processor module - SDRAM max. 256 MByte, 7.5 nsec cycle time, 32-Bit data width - Flash max. 64 MByte, 90 nsec access time, 16-Bit data width - nvsram, 32 kbyte, 45 nsec access time - SRAM 128 kbyte, 8-Bit data width Interfaces DLC-200 HCB32M - Ethernet, 10 MBit/s or 100 MBit/s, RJ45 jack (electrical) ST-connector (optical). Galvanic isolation 1000 V minimum. - RS232/RS485, COM H1 (service) up to 1 MBit/s, COM H2 up to 2 MBit/s. 10 pin TAJ jack, shielded. Galvanic isolation 1000 V minimum. - CAN, up to 1 MBit/s, 9-pin DSUB connector. Galvanic isolation 1000 V minimum. - ISDN, NT or TE mode, 8-pin TAJ connector. Galvanic isolation 1000 V minimum. - USB 1.1, 12 MBit/s full speed or 1,5 MBit/s low speed, USB jack Type B. - EN (IEC1107), max. 7 slaves at every channel, 2-pin MicroFit jack. Galvanic isolation 1000 V - M-Bus Master, max. 10 slaves - Others - Digital outputs, V, max 30 VA. Galvanic isolation 1500 V minimum. - Digital inputs, V. Galvanic isolation 500 V minimum - Analog inputs, 12-Bit resolution, input filter f g 10 Hz. Galvanic isolation - Telecontrol bus, 6-wire RS485, line length max m. - extended range interface, 4-wire RS GSM 900/1800 MHz - Ethernet - ISDN - Modem 56 kbit/s Power supply - Input range 90 VAC VAC - Input protection - Powerfail detection at V IN < 90 VAC - Output voltages - 5 V DC - ±24 V DC - Output voltage filter System connector 4 rows DIN (180 ) Operating conditions Temperature Range 0 70 C Humidity 5 95% non condensing DLC-200 PLM - 2-wire power-line coupling (9 khz 500 khz) - External amplifier module interface for 3- phase coupling (4 khz 500 khz)

5 Mechanical Data DLC-200 PLM DLC-200 HCB32M 20 mm 14 mm 20 mm Case Dimensions (L x B x H) 161 x 108 x 90 Material Aluminium