Wireless Laser Barcode Scanner User Manual V.D1508

Transcription

1 Wireless Laser Barcode Scanner User Manual V.D

2 Thank you for choosing our company s product.to have a better operating experience,please read this manual carefully. Packing list: Barcode scanner*1 USB cable/charging cable*1 User manual*1 Power Plug (optional) *1 Charging cable*1 CONTENT Housing Design Description Technical Parameters How to Use Bluetooth Adapter Installation Guide-Windows XP Bluetooth Adapter Installation Guide-Windows 7 Bluetooth Adapter Installation Guide-Windows Paired with Android/IOS/MAC Devices Charging Reading Angle Wired and Wireless Mode Switchover LED Indicator & Beeper Scanning Mode Setup User ID Settings Sleep Time Settings (for wireless & Bluetooth) Language Settings Bluetooth RF Reliability Bluetooth Transmit Speed Control (only for Bluetooth) Beep1: Scan bar code successfully (default as on) Beep2: RF upload successfully (default as on) Shutdown/Initialization/Version information Function Settings Trigger Mode IMAGE Add Bar Code ID(Bar Code identifying Code) Language Setting Capital and Lower-case Bar Code Termination Characters Settings Barcode Setting Code 11 Code 93 Code 39 Code 12 Interleaved/ITF25 Industrial 25 MSI/PLESSEY UPC-A UPC-E EAN-13 EAN- UPC/EAN ISBN CODABAR Code32 Appendix

3 Housing Design Description indicator light shock resistance cover Scanning width Prompt mode Contrast Scan angles Cylinder Horizontal 5cm 30cm Buzzer, indicator light 30% Roll30 Pitch75 Yaw65 Diameter 35mm trigger button USB adapter Physical Parameters Material ABS+PC+PVC Size L*W*H:93mm*mm*160mm Power supply DC 5V ±5% Power 10mw(operating); 25mw(standby); 360mw(MAX) Battery 3.7V 750mAH Lithium polymer battery Charging time 2 hours Weight 136g (without cable) Technical Parameters Performance Parameters Interface USB wired/wireless Transmission Distance 2.4G 30M / Bluetooth 10M Light Source Storage Decoding capability Resolution Depth of field Decoding speed Error rate Trigger mode Sensing distance Sensing delay Sensing speed Reading width Reading distance Laser LED 650± 20nm (National laser safety standard class 1) 64K(About b id barcodes)(the memory capacity can be customized) UPC-A,UPC-E,EAN-13,EAN-,ISBN/ISSN code 39, Codabar,Interleave 25,Industrial 25,Matrix 25,Code 12, Code 93,Code 11,MSI/PIESSEY,UK/PLESSEY, UCC/EAN12,etc. Minimum 0.1mm (4mils) 3 9cm(0.1mm bar width);3.5 45cm(0.3mm bar width) 200scans/sec 1/5 million Manual trigger;auto continuous scanning;infrared auto scanning,stand auto scanning(optional) 25cm (250cm2) 20cm(100cm2) 5cm(small area) 2sec/time 100times/sec 60mm at30mm (from objects); 9mm at100mm (from objects) mm reading pitch 60º reading dip angle 45º 1 Environment Parameters How to Use Power On Press the button. The scanner will have two short beep sounds and the indicator light will blink.the scanner is power on. Power Off IP Grade Operating Temp. Storage Temp. Operating Humidity Storage Humidity ESD protection Shock resistance IP 54 0 to 50 ºC / 32 to 122 ºF 0 to 50 ºC / 32 to 122 ºF 20-5% (non-condensing) 20-5% (non-condensing) 15KV air discharge 1.2m free fall on concrete surface The default shutdown time is 20 seconds. If there is no operation within 20 seconds, the buzzer will have a long beep sound and then enter into sleep mode with the indicator light off. Enter into Paring Mode 1.Press the button continuously for 10 seconds. 2.Scan one-key pairing bar code ( one-key paring) Note: 1. For Bluetooth scanner, please keep pressing the button for 10 seconds, or scan one-key paring bar code, then the scanner will enter into pairing mode. 2

4 2. For 2.4G wireless scanner, please plug the adapter to the computer and scan one-key paring bar code within 10 seconds. Otherwise, the scanner won t pair to the computer. If fail to pair, please pull out the adapter and plug in again, then repeat the same step. Bluetooth Adapter Installation Guide-Windows XP 1. Plug in the Bluetooth adapter. Bluetooth device icon will show on the system tray. 2. Double click the Bluetooth icon then the Bluetooth device dialog box will show. (User can also click the Bluetooth device from the control panel.) 3. Click add and the Bluetooth device wizard will show. 4. Scan the setup code scan and match or press the trigger button for 10 seconds in order to let the Bluetooth scanner get into matching condition.the LED light flashes quickly. Select My device is set up and ready to be found and click next. 5. There will be a Bluetooth device wizard dialog box that shows Barcode Scanner icon. If not, click search again. 6. Double click Barcode Scanner icon and see the passkey dialog box. 7. Select don t use a passkey and click next to start installing the driver.. After installation, there will be an extra Barcode Scanner in the Bluetooth device and an extra HID Keyboard Device in the device manager. The Bluetooth adapter installation is finished now. 9. Now open any edit box like notepad to start reading and uploading bar codes. Bluetooth Adapter Installation Guide-Windows 7 1. Plug in the Bluetooth adapter then the Bluetooth icon will show. 2. Double click the Bluetooth icon and then the Devices and Printers will show. 3. Activate the scanner and scan the setup code scan and match or press the trigger button for 10 seconds, then LED light flashes quickly and the Bluetooth scanner enters to the matching condition. 4. Click add a device and there comes a dialog box that shows Barcode Scanner. 5. Right click the device icon and right click again to select the properties. 6. Select Drivers for keyboard, mice, etc [HID] in the properties dialog box and click yes. 7. After installation there will be a balloon to show installation success. The device manager has a new HID keyboard device.. Now the Bluetooth installation finished. Open any edit box like notepad to start reading and uploading bar codes. Bluetooth Adapter Installation Guide-Windows 1. Plug in the Bluetooth adapter. 2. Open control panel and click add a device. 3. Activate the scanner and scan the setup code scan and match or press the trigger button for 10 seconds, then LED light flashes quickly and the Bluetooth scanner enters to the matching condition. 4. Click add a device and there comes a dialog box that shows Barcode 3 Scanner. Select the device and click next. 5. Now the Bluetooth installation finished. Open any edit box like notepad to start reading and uploading bar codes. Paired with Android/IOS/MAC Devices 1. Please confirm the scanner is in paring mode. Otherwise, the device can t search the scanner. 2. Click the searched Bluetooth device directly. It can finish the pairing automatically. Charging Please connect the RJ45 interface of the charging cable to the bottom of the scanner and the USB interface to the computer. Or, connect the 5V 500mA power adapter to the power socket. Charging time will be 2-3 hours. After fully charged, the scanner can work -12 hours continuously Reading Angle 1. Maintain a bevel between the scanner and the bar code to make a best reading. 2. Do not keep the scanner in 90 with the bar code, otherwise the scanner can t read. 3. The scanner must aim at the bar code and the beam must cover the whole bar code. If not, error may occur. correct way of reading incorrect way of reading 4 correct way of reading incorrect way of reading Notice: 1. The barcode scanner has been set well before delivery. It can be used directly. Please do not scan the bar codes in the manual optionally to test the scanner. In case of scanning the setting bar codes and abnormal condition occurs, please scan Initialization Setting bar code and Serial Mode bar code as below to reset factory defaults. 2. The wireless adapter should be connected to the fixed computer USB interface. Do not plug in or pull out the adapter frequently in order to help improving the working efficiency and avoid man-made damage. Initialization Setting Serial Mode

5 Wired and Wireless Mode Switchover If need to switch to wired mode, please scan Initialization Setting setup bar code as below. Inventory Mode Non-volatile Mode Initialization Setting If need to switch back to wireless mode, please scan Serial Mode bar code as below. Upload Data Total Number of Data LED Indicator & Beeper Serial Mode User ID Settings Clear Data Indicator Light Color Green light and will be off soon Red light always on Blue light blinking (Bluetooth) Beep Sound A short beep A long beep Two short beep Three short beep Three long beep Instruction Reading successfully and comes a short beep Charging (red light will be off when fully charged) Press the button for 10 seconds. The blue light blinks and scanner enters into pairing mode. After pairing successfully, the blue light is on always. Instruction Reading successfully Auto shutdown and enter into sleep mode Power on Fail to upload data. Please pair again Low power, please charge. ID Settings ID Display ID Hidden Scanning Mode Setup Setup Instruction: 1. Normal mode means real-time transmission. Scan Normal Mode bar code, the scanner will be in real-time transmission. 2. In inventory mode, the scanner will save the bar code it reads. When need to upload the data to computer, scan Data Upload bar code. 3. Scan Total Number of Data bar code, the computer will show how many bar codes the scanner reads under inventory mode. 4. Scan clear data bar code means clear all the bar codes being read under inventory mode Setting Instruction: 1. Scan ID Settings 2. Scan the ID numbers which need to be set Note: ID Setting is only for wireless, not for Bluetooth temporarily. Sleep Time Settings (for wireless & Bluetooth) Normal Mode 5 Sleep Time 6

6 Setup Instruction: 1. Scan Sleep Time bar code 2. Scan the time you want to set.(if set the sleep time 60 seconds, the scanner will be power off after 60seconds) 20 seconds (Default) 30 seconds Beep1: Scan bar code successfully (default as on) On Off Beep2: RF upload successfully (default as on) 60 seconds 2 minutes On Shutdown/Initialization/Version information Off 5 minutes 10 minutes Shutdown Initialization 20 minutes no sleep Language Settings Software Version Function Settings Trigger Mode Hardware Version American English (default) German Default Mode Single scan no trigger French Italian Multiscan Multiscan no trigger Spanish Bluetooth RF Reliability Russian IMAGE Anto continuous scan Pulse on off (default) Bluetooth Transmit Speed Control (only for Bluetooth) DECODE OPTIONS REVERSE IMAGE-ENABLE Add Bar Code ID(Bar Code identifying Code) DECODE OPTIONS REVERSE IMAGE-DISABLE Low Speed High Speed (default) Add ID code in front-enable Add ID code in front-disable 7

7 Add ID code behind-enable Language Setting Add ID code behind-disable Termination CHAR-TAB/CR American English German Termination CHAR-CR+CR French Capital and Lower-case Reset All codes preamble-stx All codes postamble-etx Capital Hide the first character Lower-case Hide the last character Reset Bar Code Termination Characters Settings Barcode Setting Code 11 Cancel Suffix Code 11 /on Code 11/ off Termination-CHAR-CR ID Character m Termination CHAR-space Code 11 redundancy enable Code 93 Code 11 redundancy disable Termination CHAR-TAB Code 93 /on Code 93 /off 9 10

8 ID Character h Code 12 redundancy enable Code 12 redundancy disable Interleaved/ITF25 Code 93 redundancy enable Code 93 redundancy disable Code 39 Interleaved/ITF25-on Interleaved/ITF25-off Code 39/on Code 39/off ID Character I Code 39 ALL ASCLL-on Code 39 ALL ASCLL-off ITF25 redundancy enable ITF25 redundancy disable Guide character-none Guide character + Industrial 25 Send start/stop CHARS-enable Send start/stop CHARS-disable Industrial 25/on Industrial 25/off ID Character k ID Character a Code 39 redundancy enable Code 39 redundancy disable Industrial 25 redundancy enable Industrial 25 redundancy disable Code 12 MSI/PLESSEY Code 12 /on Code 12/off MSI-on MSI-off ID Character g ID Character f 11 12

9 MSI redundancy enable MSI redundancy disable Transmit check digit enable Transmit check digit disable UPC-A ID Character C UPC-A -on UPC-A-off EAN-13 Convert UPC-A into EAN13 enable Convert UPC-A into EAN13 disable EAN-13 /on EAN-13/off Transmit system bit enable Transmit system bit disable Convert EAN-13 into ISBN enable Convert EAN-13 into ISBN disable Transmit check digit enable Transmit check digit disable Transmit system bit enable Transmit system bit disable ID Character b Transmit check digit enable Transmit check digit disable UPC-E ID Character e EAN- UPC-E/on UPC-E/off EAN-/on EAN-/off Convert UPC-E into UPC-A-enable Convert UPC-E into UPC-A-disable Transmit system bit enable Transmit system bit disable Transmit system bit enable Transmit system bit disable 13 14

10 Transmit check digit enable Transmit check digit disable ID Character k ID Character d CODABAR redundancy enable CODABAR redundancy disable UPC/EAN UPC/EAN supplements disable UPC/EAN supplements-2 digits Code 32 Bar with gap allowed-enable Bar with gap allowed-disable UPC/EAN supplements-5 digits UPC/EAN supplements 2&5 digits CODE 32 /on CODE 32/off UPC/EAN redundancy enable UPC/EAN redundancy disable ISBN ISBN/on ISBN/off ID Character f CODABAR CODABAR/on CODABAR/off Send start/stop CHARS-enable Send start/stop CHARS-disable 15 16

11 17 1

12 19 20

13 21 22

14 23 24