Automotive Camera Module RF Connector POK15 Series

Transcription

1 Features 1. Superior locking mechanism Our exclusive locking method keeps the mating part in constant contact with the electric reference plane(top Touch), ensuring high contact stability and reliability. The construction is protected by the outer shell. 2. High frequency transmission This sereis offers the high performance needed to meet the requirements of many different miniature devices, featuring a DC to 3GHz capacity. 3. Automatic board placement This product is available in embossed packaging; this allows the plug and receptacles to be automatically mounted Product Specifications Ratings Nominal characteristic impedance Frequency range 50Ω DC to 3GHz Operating Temperature Range Storage Temperature Range -40 to to +50 (Packed Condition) Items 1.Contact resistance 2.V.S.W.R.( ) 3.Insulation resistance 4.Withstanding voltage Specifications(Plug type) 30mΩ (Inner), 30mΩ (Outer) at 1mA AC 1.5max.(DC~3GHz) 100MΩmin. At 500V DC 500V AC for 1 minute V.S.W.R. Measurement System (plug type) The above V.S.W.R. specification values were measured using the measurement system shown below. Network Test Test Analyzer Set Port Test Port Cable D.U.T Termination Note1 : Cable type connectors were measured with SMA conversion adapters attached to both ends of the harness product of a suitable 150mm cable. Note2 : Board type connectors were mounted to a 50 glass epoxy board and measurements were conducted with SMA conversion adapters attached. 1

2 Cable Assembly (Plug) POK15-P-1.5D(02)(Applicable cable : RG316 and 1.5DS) Material/Finish Part Materials Finish and Remarks Shell Brass Ni plating Insulator PBT Gray Contact Brass Au plating Cable Guide Description ф2.74mm Coaxial Cable Center Stranded Copper Clad Steel (7 Strand) Dielectric Diameter ф1.57 Solid Polypropylene Cable Specification 1st Outer APA Laminate Shield 2nd Outer Tinned-Copper Braid Jacket Diameter ф2.74 PFA Nominal Impedance 50 Product Number Structure Refer to the charts below for determining specific part number characteristics. Please select connectors listed in this catalog when placing orders and be sure to check the latest delivery specifications at the time of ordering the product. POK15-P-1.5D(02) Series Name: 2 Assembly type: Straight Plug 3Cable type: Ø2.74 coaxial cable 4Specification 2

3 Receptacles Recommended PCB Mounting Pattern Part No. HRS No. Packaging RoHS POK15-R-SMT(02) Reel packaging 1,000 pieces per reel Embossed Carrier Tape Dimensions Reel Dimensions 3

4 Usage Precautions 1.Plugs (1) Allowable load to a cable that is mated Recommended fixed the connector by the reinforcing band to avoid Forcible wiring such as bending the cable any direction and rotated Wire after the connector is mated. If the connector is forced diffrent direction from connector's center Without reinforcing band, It cause loss of connector specification by connector's eccentricity. (2)Precautions Do not mate or unmate a connector with an excessive prying force. It may cause a failure of the connector. 4

5 2. Reflow conditions of receptacles and plug receptacles (1)Recommended reflow Soldering profile for lead free solder(reference) temperature profile[reference] (2)Recommended metal mask thickness (3)Reflow cycles 1. The temperatures indicated are the surface temperatures on the printed circuit board at the points of contact with the terminals. 2. Reflow soldering should be performed at a peak temperature of 260 or less at the surface of the printed circuit board. 3. The temperature profile varies depending on conditions such as the size of the printed circuit board, the solder paste type, and solder thickness. 0.1mm 2 times 3.Operating Environment and Storage Conditions (1) Operating environment This product was designed under the assumption that it would be used in a normal operating environment. Use of this connector under adverse environmental conditions may lead to discoloration or other kinds of degradation. Use of the connector in regions having exposure to excessive amounts of fine particles and dust, high densities of sulfur dioxide, hydrogen sulfide, nitrogen dioxide or other corrosive gasses (e.g., exhaust gas from automobiles or factories), is not advised environments having a large difference in temperature, such as a place near a heater. (2) Storage conditions Store the product in Hirose Electric s packaging or similar packaging conditions. Temperature: -10 to +50, humidity : 15 to 85% (recommended storage conditions) Use the product within six months from delivery. Products for which the storage period has expired must be tested for solderability before the use. 5