Type Differential pressure transducer
|
|
|
- Jemimah Ryan
- 6 years ago
- Views:
Transcription
1 Homepage > Products > Control systems > Control system EASYLAB - LABCONTROL > Sensors > Type Differential pressure transducers Type Differential pressure transducer FOR THE DIFFERENTIAL PRESSURE RECORDING AND CONTROL IN COMBINATION WITH EASYLAB Differential pressure transducers based on the static measurement principle for the room or duct pressure control in combination with EASYLAB controllers TCU3 or LABCONTROL controllers TCU-LON-II Suitable for air and non-aggressive media For use in laboratories, clean rooms in the pharmaceutical and semiconductor industries, operating theatres, intensive care units, and offices with very demanding control requirements Constructions with calibration certificate to meet GMP requirements
2 APPLICATION Application Differential pressure transducer for the LABCONTROL system For the room or duct pressure control in combination with EASYLAB controllers TCU3 or with TCU-LON-II For the room and duct pressure monitoring in combination with monitoring systems TPM For use in laboratories, clean rooms in the pharmaceutical and semiconductor industries, operating theatres, intensive care units, and offices with very demanding control requirements DESCRIPTION Variants 699: Measuring range ± 50 or ± 100 Pa 699-LCD: Measuring range ± 50 or ± 100 Pa, with differential pressure display GB404: Measuring range ± 100 Pa GB604-CAL: Measuring range ± 100 Pa, with calibration certificat to meet GMP requirements (Good Manufacturing Practice) Choose a sufficient measuring range above/below the setpoint pressure Maintenance Zero point correction once per year is recommended TECHNICAL INFORMATION Function, Technical data, Specification text, Order code, Related products FUNCTION Functional description Static differential pressure transducers function according to the static differential pressure measurement principle. The
3 sensor is a cylinder that consists of two chambers (one for positive pressure and one for negative pressure) separated by a diaphragm. If there is equal pressure in both chambers, the diaphragm is in the middle between the chambers and is not deformed. If there is a pressure difference, the diaphragm deforms towards the chamber with the negative pressure. The degree by which the diaphragm deforms is a measure for the differential pressure. This is why the voltage signal is proportional to the differential pressure. Principle of operation room pressure control 1 Controller EASYLAB TCU3 or LABCONTROL TCU-LON-II In a lab, the room pressure transducer is typically linked to the supply air controller; in a clean room, it is linked to the extract air controller. TECHNICAL DATA Static differential pressure transducer 699
4 Supply voltage 24 V AC ± 15 % or V DC Power rating 1 VA Output signal 0 10 V DC, 1 ma max. Media non-aggressive gases Measuring range ± 50 Pa factory set, can be changed to ± 100 Pa Measurement accuracy ± 2 % of full scale Overload protection for negative pressure measurement: 400 Pa at P1, for positive pressure measurement Pa at P1 Connections for tubes Ø 6.2 mm (for flexible tubes 6 mm) Operating temperature 0 70 C (non-condensing) IEC protection class III (protective extra-low voltage) Protection level IP 54 (with cover) EC conformity EMC according to 2004/108/EC Dimensions (B H T) mm Weight 0.1 kg Static differential pressure transducer GB604
5 Supply voltage 24 V AC, 24 V DC ± 10 % (switching is possible) Power rating 1.8 VA Output signal 0 10 V DC; 2 ma max. Media non-aggressive gases Measuring range ± 100 Pa Measurement accuracy ± 0.5 % of full scale Maximum operating pressure 70 kpa Connections for tubes for flexible tubes 4 mm Operating temperature 20 to 65 C IEC protection class III (protective extra-low voltage) Protection level IP 54 EC conformity EMC according to 2004/108/EC Dimensions (B H T) mm Weight 0.3 kg SPECIFICATION TEXT Differential pressure transducer for the LABCONTROL system, for the measurement of room or duct pressure. When the transducer is connected to a room controller, the supply air or extract air flow is controlled based on the differential pressure.
6 ORDER CODE Order example: PT-GB604-CAL Measuring range ±100 Pa, with calibration certificate PT Type Differential pressure transducer Variants 699 Measuring range ±50 or ±100 Pa 699-LCD GB604 Measuring range ±50 or ±100 Pa, with pressure display Measuring range ±100 Pa GB604-CAL Measuring range ±100 Pa, with calibration result Variants VARIANTS
7 699 Application Differential pressure transducer for the LABCONTROL system For the room or duct pressure control in combination with EASYLAB controllers TCU3 or with TCU-LON-II For the room and duct pressure monitoring in combination with monitoring systems TPM Variants 699: Measuring range ± 50 or ± 100 Pa 699-LCD: Measuring range ± 50 or ± 100 Pa, with differential pressure display Special characteristics Supply voltage: A.C. or D.C. voltage (ideal for EASYLAB with EM-TRF-USV) Adjustable measuring ranges Short circuit proof and with reverse voltage protection Parts and characteristics Plastic casing Connections for tubes Push button for zero point reset Adjustable measuring ranges 699-LCD: Differential pressure display Construction features Fixing points at the outside, for mounting to a wall or ceiling Materials and surfaces Transparent plastic casing GB604 Application Differential pressure transducer for the LABCONTROL system
8 For the room or duct pressure control in combination with EASYLAB controllers TCU3 or with TCU-LON-II For the room and duct pressure monitoring in combination with monitoring systems TPM Variants GB604: Measuring range ± 100 Pa GB604-CAL: Measuring range ± 100 Pa, with calibration certificat to meet GMP requirements (Good Manufacturing Practice) Special characteristics Supply voltage: A.C. or D.C. voltage, switching between A.C. and D.C. is possible Parts and characteristics Plastic casing Zero point potentiometer Construction features Fixing points at the inside, for mounting to a wall or ceiling Capacitive stainless steel measuring cell Materials and surfaces Plastic casing, light grey Differential pressure transducer 699
9 Differential pressure transducer GB 604 MF
10 Home Contacts Imprint Delivery and payment terms Privacy Disclaimer TROX GmbH
11 Homepage > Products > Control systems > Control system EASYLAB - LABCONTROL > Sensors > Type Differential pressure transducers Installation details INSTALLATION DETAILS Installation and commissioning Choose a suitable installation location (reference room with stable pressure) Ensure sufficient cross section and careful placing of the measuring tubes Connect the differential pressure transducer to the controller or monitoring system Supply voltage from the EASYLAB TCU3 controller or TCU-LON II (supply voltage for the differential pressure transducer must be equal to the supply voltage provided by the controller) Cosider the warm-up time of the sensor Do not install the sensor near sources of interference such as transformers, senders, motors, or heat sources Choose a stable installation location as shocks or vibration may distort the output signal Installation should be vertical, with connections pointing downwards; this installation position corresponds to the factory setup for calibration; it also prevents the ingress of condensate from the pressure tubes. Zero point correction required 699, Terminal connections Ο: Ground +: Supply voltage : Actual value signal Home Contacts Imprint Delivery and payment terms Privacy Disclaimer TROX GmbH
12 Homepage > Products > Control systems > Control system EASYLAB - LABCONTROL > Sensors > Type Differential pressure transducers GB604, Terminal connections 1 ~, +: Supply voltage 2, -: Ground, neutral 3 +: Actual value signal 4 : Actual value signal, ground Home Contacts Imprint Delivery and payment terms Privacy Disclaimer TROX GmbH
13 Homepage > Products > Control systems > Control system EASYLAB - LABCONTROL > Sensors > Type Differential pressure transducers TROX GmbH Online-Services Service-Hotlines Heinrich-Trox-Platz D Neukirchen-Vluyn Tel.: +49 (0) Fax: +49 (0) Order-Status (My TROX NET) TROX Academy Catalogue Download Your contact partner Online fault report BIM Sales Germany and technical consulting +49 (0) Contact Technical service +49 (0) Contact Home Contacts Imprint Delivery and payment terms Privacy Disclaimer TROX GmbH
Type Differential pressure transducer
Homepage > Products > Control systems > Control system EASYLAB - LABCONTROL > Sensor systems > Type Differenzdrucktransmitter Type Differential pressure transducer FOR THE DIFFERENTIAL PRESSURE RECORDING
Type Differential pressure transducer
Homepage > Prodotti > Sistemi di regolazione > Sistema di regolazione EASYLAB - LABCONTROL > Sensori > Type Differential pressure transducers Type Differential pressure transducer FOR THE DIFFERENTIAL
Type Static differential pressure transducers
Homepage > Products > Control units > Volume flow rate measurement > Transducer > Type Static differential pressure transducers Type Static differential pressure transducers FOR THE STATIC EFFECTIVE AND
Homepage > Products > Control Systems > Control system EASYLAB > Control panels > Type BE-SEG. Type BE-SEG
Homepage > Products > Control Systems > Control system EASYLAB > Control panels > Type BE-SEG Type BE-SEG FOR EASYLAB FUME CUPBOARD CONTROLLERS AND FMS MONITORING SYSTEMS Control panels to be used for
Control engineering information VARYCONTROL VAV Units VAV Compact flow rate controller BC0 BF0
Control engineering information VARYCONTROL VAV Units flow rate controller BC0 BF0 The art of handling air Contents 1 General information 3 Correct use 3 Materials 3 Maintenance 3 2 Field of application,
Typ FMS FOR THE MONITORING OF VOLUME FLOWS
Strona główna > Produkty > Systemy regulacji > System regulacji EASYLAB - LABCONTROL > Systemy monitorowania > Typ FMS Typ FMS FOR THE MONITORING OF VOLUME FLOWS Electronic, self-powered monitoring system
Homepage > Products > Control units > VARYCONTROL > Secondary silencer > Type TS. Type TS
Homepage > Products > Control units > VARYCONTROL > Secondary silencer > Type TS Type TS FOR THE REDUCTION OF AIR-REGENERATED NOISE OF AIR TERMINAL UNITS TYPE TVZ, TVA, TZ-SILENZIO, TA-SILENZIO OR TVM
Type EASYLAB TCU3 EASYLAB CONTROLLERS FOR THE MOST DEMANDING CONTROL ENGINEERING TASKS
Type EASYLAB TCU3 EASYLAB CONTROLLERS FOR THE MOST DEMANDING CONTROL ENGINEERING TASKS Electronic controller that offers plug and play communication for demanding control tasks, yet simple wiring and commissioning
Operating and Installation Manual. EASYLAB Expansion modules Type EM-TRF for 230 V AC mains voltage
Operating and Installation Manual EASYLAB Expansion modules Type EM-TRF for 230 V AC mains voltage Type EM-TRF-USV for 230 V AC mains voltage; provides uninterruptible power supply (UPS) The art of handling
Type Dynamic differential pressure transducers
Homepage > Prodotti > Unità di regolazione > Misurazione della portata aria > trasduttore > Type Dynamic differential pressure transducers Type Dynamic differential pressure transducers FOR THE DYNAMIC
Operating Instructions Differential Pressure Transducer PS27
Operating Instructions Differential Pressure Transducer PS27 halstrup-walcher GmbH Stegener Straße 10 79199 Kirchzarten/Germany Phone: +49 (0) 76 61/39 63 0 Fax: +49 (0) 76 61/39 63 99 E-mail: info@halstrup-walcher.com
Room sensors QFA4160 QFA41 D AQF4150 AQF3153. Symaro. for relative humidity and temperature with calibration certificates
1 859 1859P01 1859P02 1859P04 QFA4160 QFA41 D AQF4150 AQF3153 Symaro Room sensors for relative humidity and temperature with calibration certificates QFA41 Operating voltage AC 24 V / DC 13.5...3 Signal
Duct Sensors. Building Technologies HVAC Products. Symaro. for relative humidity and temperature with calibration certificates
1 883 1883P01 1883P02 QFM4160 AQF4150 Symaro Duct Sensors for relative humidity and temperature with calibration certificates QFM41 Operating voltage AC 24 V / DC 1353 Signal output DC 010 V / 420 ma for
Control components for VAV terminal units
X X testregistrierung Control components for VAV terminal units For different actuators Modular control components for VAV terminal units Module selection based on application Actuators with selected actuator
Assembly instructions FMS-1 / FMS-2. Monitoring system
Assembly instructions GB/en FMS-1 / FMS-2 Monitoring system TROX GmbH Heinrich-Trox-Platz 47504 Neukirchen-Vluyn Germany Telephone: +49 2845 202-0 Fax: +49 2845 202-265 email: trox@trox.de Internet: www.troxtechnik.com
Portable low-pressure controller Model CPC2000
Calibration technology Portable low-pressure controller Model CPC2000 WIKA data sheet CT 27.51 Applications Mobile calibration of low-pressure measuring instruments Supply of very low positive or negative
Differential pressure sensor For ventilation and air-conditioning Model A2G-50
Electronic pressure measurement Differential pressure sensor For ventilation and air-conditioning Model A2G-50 WIKA data sheet PE 88.02 for further approvals see page 5 Applications For measuring differential
Multi-range pressure and differential pressure transmitter
Page 1/6 Multi-range pressure and differential pressure transmitter Type 402005 Applications Ventilation Air conditioning Clean-room technology Flue draft mechanisms Filter monitoring Brief description
Pressure transmitter for highest pressure applications Up to 217,500 psi (15,000 bar) Model HP-2
Electronic pressure measurement Pressure transmitter for highest pressure applications Up to 217,500 psi (15,000 bar) Model HP-2 WIKA data sheet PE 81.53 Applications Test bench construction Water jet
Type EM-BAC-MOD BACNET AND MODBUS INTERFACE FOR EASYLAB CONTROLLERS AND ADAPTER MODULES
Homepage > Products > Control systems > Control system EASYLAB - LABCONTROL > Expansion modules > Type EM-BAC-MOD Type EM-BAC-MOD BACNET AND MODBUS INTERFACE FOR EASYLAB CONTROLLERS AND ADAPTER MODULES
Instruction Manual PU/PI and PS10 Differential Pressure Transducers
Instruction Manual PU/PI and PS10 Differential Pressure Transducers halstrup-walcher GmbH Stegener Straße 10 D-79199 Kirchzarten Germany Phone: +49 (0) 76 61/39 63 0 Fax: +49 (0) 76 61/39 63 99 E-Mail:
Output signal active note. Output signal. temperature DC V, DC V DC V, DC V DC V
Duct Air Quality Sensor Duct air quality sensor for detection of CO₂ with 0 to10 V output. Optional integrated, humidity, VOC sensors and LCD display. Type Overview Type active CO₂ 22DC-11 22DC-110L 22DCK-11
Output Signal. 22DTM-16 BACnet DC V, DC V. Electrical data Power Supply DC V, ±10%, 0.3 W
Duct Sensor CO₂ / Humidity / Temperature Duct air quality sensor for combined detection of CO₂, relative humidity and temperature. Designed for control and monitoring applications. Type Overview Type Output
Dual differential pressure sensor For ventilation and air-conditioning Model A2G-52
Pressure Dual differential pressure sensor For ventilation and air-conditioning Model A2G-52 WIKA data sheet PE 88.03 for further approvals see page 5 Applications For monitoring air, non-inflammable and
Relative, and differential pressure transmitter type 699
Relative, and differential pressure transmitter type 699 Pressure range -1... 1 mbar / 0... 0.3 50 mbar The type 699 transmitters are available in switchable pressure ranges and with or without display.
THERMASGARD TM 65. Immersion screw-in duct temperature measuring transducer, calibratable, with multi-range switching and active output TECHNICAL DATA
Patented quality product (Immersion sensor patent no. DE 10 2012 017 500.0) Calibratable temperature measuring transducer THERMASGARD with eight switchable measuring ranges, continuous linear output, enclosure
Control systems. Efficient room control
Control systems Efficient room control AIRCONTROL Efficient room control with X-AIRCONTROL Humidity Occupancy Increasingly demanding requirements on energy efficiency as well as the latest EU regulations
Instruction Manual P82R Differential Pressure Transducer with Root- Extracted Characteristic Curve
Instruction Manual P82R Differential Pressure Transducer with Root- Extracted Characteristic Curve halstrup-walcher GmbH Stegener Straße 10 D-79199 Kirchzarten Germany Phone: +49 (0) 76 61/39 63 0 Fax:
Differential Pressure Controller DPC 200
Differential ure Controller DPC 200 Low pressure sensor with analog output and PI Diagraphm element with differential transformer Measuring range from 0...50 Pa up to 0...6000 Pa LCD-Display Analog output
C-Flow Coriolis Mass Flow Meter
Coriolis Mass Flow Meter Application and Features For fluids (e.g. PU components, paints) and gases of high density Suitable for aggressive and contaminated media Measurement of mass flow, density, temperature
InBin-P Pressure switches from 5 Pa Pa
InBin-P Pressure switches from 5 Pa...100 Pa Electrical, binary pressure or differential pressure switches with adjustable switch activation delay 24 VAC/DC supply voltage, potential free switching contact
DP DP2500 DP0250
DP7000 - DP2500 DP0250 PB_DP7000_DP2500 - DP0250_07 2016 Field adjustable, multi-range differential pressure transmitters Product Bulletin The Delta Pressure transmitter series of Johnson Controls, with
Output signal. 22DTM-16 BACnet DC V, DC V. Electrical data Power supply DC V, ±10%, 0.3 W
Duct Sensor CO₂ / Humidity / Temperature For combined measurement of CO₂, relative humidity and temperature in the duct. Dual channel CO₂ technology. The measured values are output via BACnet. NEMA 4X
Indication and Adjustment Product Information VEGADIS 61. Level Switching Pressure
Indication and Adjustment Product Information VEGADIS 61 Level Switching Pressure 2 VEGADIS 61 Contents Contents 1 Product description...4 1.1 Configuration... 4 1.2 Principle of operation... 4 1.3 Adjustment...
Control components for VAV terminal units
.3 X X testregistrierung Control components for VAV terminal units Type For contaminated extract air or for pressure control Modular control components for VAV terminal units, especially for aggressive
ProcessCalibrator Model CPH6000
Calibration technology ProcessCalibrator Model CPH6000 WIKA data sheet CT 15.01 Applications Calibration service companies/service industry Maintenance facilities Measurement and control laboratories Quality
Assembly and operating instructions. Control panel. EASYLAB BE-SEG-02 and BE-SEG-03
Assembly and operating instructions GB/en Control panel EASYLAB BE-SEG-02 and BE-SEG-03 TROX GmbH Heinrich-Trox-Platz 47504 Neukirchen-Vluyn Germany Telephone: +49 2845 202-0 Fax: +49 2845 202 265 email:
DP2500 DP0250. Differential Pressure Transmitter. Product Bulletin
DP2500 DP0250 Differential Pressure Transmitter Product Bulletin The DP Low Differential Pressure Transmitter series is an accurate and cost competitive solution for measuring low pressures of air and
Pneumatic Control/Feedback
897 /Feedback Type 897 can be combined with... Compact design Integrated pilot valve with manual override Internal control air routing Automatic end position adjustment With ATEX II cat. G/D and cat. D/G
Pressure sensor For highest pressure applications to 15,000 bar Model HP-2
Pressure Pressure sensor For highest pressure applications to 15,000 bar Model HP-2 WIKA data sheet PE 81.53 for further approvals see page 6 Applications Test bench construction Water jet cutting High-pressure
HPS-M -2 DIFFERENTIAL PRESSURE TRANSMITTER. Mounting and operating instructions
DIFFERENTIAL PRESSURE Mounting and operating instructions Table of contents SAFETY AND PRECAUTIONS 3 PRODUCT DESCRIPTION 4 ARTICLE CODES 4 INTENDED AREA OF USE 4 TECHNICAL DATA 4 STANDARDS 5 OPERATIONAL
Portable pressure calibrator Model CPH7600
Calibration technology Portable pressure calibrator Model CPH7600 WIKA data sheet CT 17.01 Wally Box III Applications Calibration service companies and service industry Measurement and control laboratories
Manual of Electrical Installation for Pressure Probes KS and KS-SIL2 series
Manual of Electrical Installation for Pressure Probes KS and KS-SIL2 series GEFRAN SAFETY GUARANTEE Code 8594A Edition 2/204 Contents. General precautions pag 2 2. Transmitters with amplified analog output
Room unit with PPS2 interface
1 626 Room unit with PPS2 interface for use with: controllers with a PPS2 interface QAA88.3 Room temperature measurement Key buttons for adjustment of the room temperature setpoint Key buttons for operating
Output Signal Active Note DC V. Electrical Data Power Supply DC V, ±10%, 1.4 W
Differential Pressure Sensor (Air) Differential pressure transmitter with 8 selectable ranges 0 to 5/10 V, 4 to 20 ma outputs and Modbus functionality. NEMA 4X / IP65 rated enclosure. For monitoring the
Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency
echnical data sheet LR24A-MOD Communicative rotary actuator for ball valves orque motor 5 Nm Nominal voltage AC/DC 24 V Control modulating,, hybrid mode Conversion of sensor signals Communication via BACnet
Inductive angle sensor with analog output Ri360P1-DSU35TC-ELi-Exi
ATEX category II 2 G, Ex Zone 1 ATEX category II 2 D, Ex Zone 21 Rectangular, housing DSU35 Plastic, PP-GF30-VO Detection of angular range 0 to 360 P1-Ri-QR14 positioning element included in delivery Measuring
Pressure range mbar / mbar
Pressure range -1... 1 mbar / 0... 0.3 50 mbar Technical overview Pressure range Relative and differential Operating conditions Medium Temperature Tolerable overload on one side Rupture pressure Application
Pneumatic Control/Feedback
897 /Feedback Type 897 can be combined with... Compact design Integrated pilot valve with manual override Internal control air routing Bright LED position indicator Automatic end position adjustment Type
Output Signal. Temperature 22DTH-56M BACnet DC V, DC V. Electrical Data Power Supply DC V, ±10%, 0.7 W
Duct Sensor Humidity / Temperature For measuring the relative or absolute humidity and temperature in duct applications. The measured values and absolute humidity, dewpoint and enthalpy are transmitted
VFC. Operating manual TROX air terminal units Type VFC volume flow controllers. General information 2. VFC series volume flow controllers
Type volume flow controllers series volume flow controllers General information Correct use Safety notes Area of application Operating modes Product description Installation 4 Commissioning and wiring
Immersion Temperature Sensors
1 782 1782P01 Symaro Immersion Temperature Sensors QAE2164 QAE2174 Active sensors for acquiring the water temperature in pipes and tanks Operating voltage AC 24 V or DC 13535 V Signal output DC 010 V or
14 Pressure Measurement. Measuring Devices Description Pressure range Connection Device Page
Measuring Devices Pressure range Connection Device Page Digital display mounting, für niedrige Drücke 0 2. mbar / 2. bar 4 mm tube MPV, MPA.02 portable, hand-operated 0 1 mbar / 10 bar 4 mm tube MHA.03
SRQ24A. Technical data. Safety notes. Rotary actuator for ball valves Torque 16Nm Nominal voltage AC/DC 24V Control: Open-close Running time 9s
SRQ24A Rotary actuator for ball valves orque 16Nm Nominal voltage AC/DC 24V Control: Open-close Running time 9s echnical data Electrical data Nominal voltage AC 24V, 50/60Hz / DC 24V Nominal voltage range
CDD4 Duct Carbon Dioxide Transmitter
Drill or punch a 1-1/8 or 1-1/4 hole in the duct at the preferred location and insert the probe into the hole to mark the enclosure mounting holes. Remove the unit and drill the four mounting holes. Clean
L Series Humidity/-temperature sensors for use in heating, ventilation and air conditioning Technical data Humidity
Galltec Mess- und Regeltechnik GmbH MELA Sensortechnik GmbH Boschstr. 4 Raasdorfer Str. 18 71145 Bondorf. Germany 07987 Mohlsdorf-Teichwolframsdorf. Germany Tel. +49 (0)7457-9453-0 Tel. +49(0)3661-62704-0
Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency
Technical data sheet NKQ24A- SuperCap rotary actuator with emergency control function and extended functionalities for adjusting dampers in technical building installations and in laboratories Air damper
Precision thermometer Model CTR5000
Calibration technology Precision thermometer Model CTR5000 WIKA data sheet CT 60.20 Applications Precision thermometer for very accurate temperature measurements in a range of -200... +962 C Reference
Power consumption In operation At rest For wire sizing. Torque Inhibiting torque. 150 s / C Sound power level Motor
echnical data sheet GK24A-SR Modulating SuperCap rotary actuator with emergency setting function and extended functionalities for adjusting air dampers in ventilation and air-conditioning systems for building
VAV compact controller KNX / PL-Link
s 3 547 OpenAir VAV compact controller KNX / PL-Link Series E GDB181.1E/KN GLB181.1E/KN Networked compact controller featuring KNX (S-mode / LTE-mode) and PL- Link capability for plants with variable air
TEPI11 P/I signal converter
Contents Data Sheet 10/18-0.15-EN Rev. A TEPI11 P/I signal converter Air pressure in current DMS sensor for gauge pressure Compact design Small dimensions, low weight Can be installed in any orientation
QXA2000 QXA2001. Condensation Monitor QXA2001 QXA2000 AQX2000
1 542 1542P03 1542P01 1542P02 QXA2001 QXA2000 AQX2000 Condensation Monitor QXA2000 QXA2001 The QXA2000 condensation monitor is used to avoid damage due to condensation on chilled ceilings and in HVAC plant.
MID approval no. DE-08-MI004-PTB004 Date of release
1. Identification Energy and Flow Computer Flow rate and energy calculator for liquids, gases and water steam E-DB-1000-700-01 MID approval no. DE-08-MI004-PTB004 Date of release 04.01.08 2. Area of Application
Zone Pressure Touch (ZPT) Sensor - Standard Range
Product Identification BAPI s Touch Pressure Sensor is an accurate, rugged and economical solution for measuring and reporting duct/ building static pressure, room-to-room differential pressure or air
Airflow Pressure Sensor
Desigo TRA Airflow Pressure Sensor DXA.S04P1... Airflow Pressure Sensor (APS) is used to measure airflow for room pressurization and fume hood control applications. Differential Pressure (velocity) is
Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency
echnical data sheet NKA-DKC L Modulating SuperCap rotary actuator with emergency control function and extended functionalities for adjusting dampers in technical building installations and in laboratories
Float Switches with Permanent Magnet For Vertical Installation Model RSM
Level Measurement Float Switches with Permanent Magnet For Vertical Installation Model RSM WIKA Data Sheet LM 30.01 Applications Level measurement for almost all liquid media Pump/level control and monitoring
Duct humidity and temperature sensor for all HVAC duct applications. Designed for control and monitoring applications.
FTK RS485 Modbus Duct sensor for relative humidity and temperature Data Sheet Subject to technical alteration Issue date: 18052015 Application Duct humidity and temperature sensor for all HVAC duct applications
Model HU-224/225. Technical Information TI.224/ Humidity Transduce r FOR ADDITIONAL INFORMATION SEE HU-224/225 DATA SHEET
Model /225 FOR ADDITIONAL INFORMATION SEE /225 DATA SHEET SPECIFICATIONS Accuracy*: ± 2% / ± 3% RH Range: 0-100% RH Hysteresis: ± 1% Supply Voltage:12-40 VDC 12-35 VAC (VDC output units only) Supply Current:
Level sensor Magnetostrictive, high-resolution measuring principle Models FFG-P, FFG-T, FFG-TP, FLM-H
Level measurement Level sensor Magnetostrictive, high-resolution measuring principle Models FFG-P, FFG-T, FFG-TP, FLM-H KSR data sheet FFG-P, FFG-T, FFG-TP, FLM-H Applications High-accuracy level measurement
Zone Pressure Touch Sensor - Standard Range
Overview The Zone Pressure Touch (ZPT) Sensor is an accurate, rugged and economical solution for measuring and reporting duct/ building static pressure, room-to-room differential pressure or air velocities/volumes.
Model VDL 115 Vacuum drying chambers for flammable solvents
Model VDL 115 Vacuum drying chambers for flammable solvents A BINDER safety vacuum drying oven of the VDL series ensures maximum safety when drying organic solvents standard with TÜV/GS. The inner chamber
OEM. Room unit QAA822 with2- wire interface. Building Technologies CLIMATIX TM. For use with Climatix controllers
OEM CLIMATIX TM Room unit QAA822 with2- wire interface For use with Climatix controllers Remote control of air conditioning unit Mandík Measurement of the room temperature Buttons for starting, setting
Electronic pressure switch with display For sanitary applications Model PSA-31
Electronic pressure measurement Electronic pressure switch with display For sanitary applications Model PSA-31 WIKA data sheet PE 81.85 Applications Food and beverage industry Pharmaceutical industry Filling
Miniaturised pressure sensor Model M-10, standard version Model M-11, version with flush diaphragm
Electronic pressure measurement Miniaturised pressure sensor Model M-10, standard version Model M-11, version with flush diaphragm WIKA data sheet PE 81.25 for further approvals see page 5 MicroTronic
Universal Controller
3 342 Universal Controller For comfort control in HVAC & R-Systems Standalone electronic universal controller with P or PI response Operating voltage in accordance to type AC 24 V Control application selectable
Power consumption In operation At rest For wire sizing. Torque Inhibiting torque. 150 s / C Sound power level Motor
echnical data sheet GK4A- Damper actuator with capacitor technology for adjusting air dampers with emergency control function and extended functionalities in ventilation and airconditioning systems for
Heating Circuit Controller
2 705 Synco 900 Heating Circuit Controller RRV912 RF-controlled heating circuit controller for up to 2 heating circuits RF communication based on KNX standard (868 MHz, bidirectional) Connection facility
Room Temperature Controllers
3 021 Room Temperature Controllers for two-pipe fan coil units RCC10 Output for on / off valve actuator Outputs for three-speed fan Control depending on the room or return air temperature (RCC10) Automatic
CLEVELAND CONTROLS MODEL 6650 DIGITAL MANOMETER INSTRUCTION MANUAL DM
CLEVELAND CONTROLS MODEL 6650 DIGITAL MANOMETER INSTRUCTION MANUAL DM-6650.02 1 Instruction Manual DM-6650.02 TABLE OF CONTENTS I.0 INTRODUCTION 3 1.1 General Description... 3 1.2 Specifications... 3 1.3
Operating Manual. English. Digital-Analog Converter DACON8-UMB.
English Digital-Analog Converter www.lufft.de G. Lufft Mess- und Regeltechnik GmbH, Fellbach, Germany. We reserve the right to amend technical specifications at any time. Contents 1 Please Read Before
CLEAN ROOM PANEL - CRP5
RELIABLE MEASUREMENTS IN CLEAN ROOMS Measures differential pressure, humidity and temperature Designed specifically for clean rooms Removable humidity and temperature probes for simpler adjustment and
ProcessCalibrator Model CPH6000
Calibration technology ProcessCalibrator Model CPH6000 WIKA data sheet CT 15.01 Applications Calibration service companies/service industry Maintenance facilities Measurement and control laboratories Quality
InReg Volume flow controller Pa
InReg Volume flow controller 0...300 Pa Electrical volume flow controller (CAV / VAV) for use in safe areas 24 VAC / DC supply, adaptive PID controller, alarm contact InReg - V... InReg - V... - A InReg
Level sensor Stainless steel version Model RLT-1000, for industrial applications
Level measurement Level sensor Stainless steel version Model RLT-1000, for industrial applications WIKA data sheet LM 50.02 Applications Level measurement of liquids in machine building Control and monitoring
LMP 308. Separable Stainless Steel Probe. Stainless Steel Sensor. accuracy according to IEC 60770: standard: 0.35 % FSO option: 0.25 % FSO / 0.
LMP 08 Separable Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.25 % FSO / 0. % FSO Nominal pressure from 0... mh 2 O up to 0... 250 mh 2 O Output signals 2-wire:
TM-2100 Series Room Command Module
TM-2100 Series Room Command Module Product Bulletin Code No. 21.144 E Issued 02 2011 The TM-2100 series of Room Command Modules are designed for use with the FCC series of DDC terminal unit controllers.
TECHNICAL MANUAL PRESSURE TRANSDUCER TYPE MLP
RDP CUSTOMER DOCUMENT TECHNICAL MANUAL PRESSURE TRANSDUCER TYPE MLP Doc. Ref CD1001Q BS EN ISO 9001 Certificate No. FM13141 Affirmed by Declaration of Conformity USA & Canada RDP Electrosense Inc. 2216
PHOENIX CONTACT - 11/2008
The small form-factor pluggable module (SFP module) is a plug-in input/output module for fiber optics that is used in Gigabit Ethernet AUTOMATION Data Sheet 7762_en_01 PHOENIX CONTACT - 11/2008 1 Description
Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency
echnical data sheet NM24A-MOD Communicative damper actuator for adjusting dampers in technical building installations orque motor 10 Nm Nominal voltage AC/DC 24 V Control modulating,, hybrid mode Conversion
Float Switches with Permanent Magnet For Horizontal Installation Model HIF
Level Measurement Float Switches with Permanent Magnet For Horizontal Installation Model HIF WIKA Data Sheet LM 30.02 Applications Level measurement for almost all liquid media Pump/level control Chemical
MODEL: M5DY SEN TRONIC AG CURRENT LOOP SUPPLY. [2] POWER INPUT AC Power M: V AC (Operational voltage range V, Hz)
![MODEL: M5DY SEN TRONIC AG CURRENT LOOP SUPPLY. [2] POWER INPUT AC Power M: V AC (Operational voltage range V, Hz)](/thumbs/90/103899684.jpg "MODEL: M5DY SEN TRONIC AG CURRENT LOOP SUPPLY. [2] POWER INPUT AC Power M: V AC (Operational voltage range V, Hz)")
Super-mini Terminal Block Signal Conditioners M5-UNIT CURRENT LOOP SUPPLY Functions & Features Powering a 0 ma DC current loop Applicable to smart transmitters Isolation between the input and output Fast
InCos-P Pressure sensor 20 Pa Pa
InCos-P Pressure sensor 20 Pa... 7.500 Pa Electrical pressure / differential pressure sensors 24 VAC/DC supply voltage, 0...10 V / (0) analogue Compact. Easy installation. Universal. Cost effective. Safe.
Functional data Factory settings Variable Setting Torque Inhibiting torque
echnical data sheet GK4A-MF Parameterisable SuperCap rotary actuator with emergency setting function and extended functionalities for adjusting air dampers in ventilation and air-conditioning systems for
TROXNETCOM AS-i. Modules. Communication interface between a component and the controller. 06/2015 DE/en K
.2 X X testregistrierung TROXNETCOM AS-i Communication interface between a component and the controller The module is used to connect the control system with the components Integral AS-Interface slave
Pneumatic precision pressure controller Model CPC6000
Calibration technology Pneumatic precision pressure controller Model CPC6000 WIKA data sheet CT 27.61 Applications Industry (laboratory, workshop and production) Transmitter and pressure gauge manufacturers
DMP 333 DMP 333. Industrial Pressure Transmitter For High Pressure. Stainless Steel Sensor. Pressure Transmitter. Industrial
DMP Industrial Pressure Transmitter For High Pressure Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 / 0. % FSO Industrial Pressure Transmitter DMP Nominal pressure
Precision pressure indicator 1- or 2-channel version Model CPG2500
Calibration technology Precision pressure indicator 1- or 2-channel version Model CPG2500 WIKA data sheet CT 25.02 Applications Factory calibration laboratories Calibration service companies and service
PTU300 Combined Pressure, Humidity and Temperature Transmitter
PTU300 Combined Pressure, Humidity and Temperature Transmitter For Demanding Applications Features Barometric pressure, humidity, and temperature measurement in one transmitter RS-232C serial interface
F-SENSOR LOW AIR VELOCITY SENSOR
home FSENSOR LOW AIR VELOCITY SENSOR Ultra low air velocity measurement Output as linear Velocity or Air volume Excellent repeatability Excellent Zero Stability Climate chamber compensated Long term span