Series Single and double-pole rocker switches

SERIES SINGLE AND DOUBLE-POLE ROCKER SWITCHES

SERIES 10 - SINGLE AND DOUBLE-POLE ROCKER SWITCHES TO 1 (4) A 0 V AC ROCKER SWITCHES PRODUCT FEATURES Inrush currents (capacitive) up to 0 A Two housing variants (with fl ange or lower lying) With mechanical

Series Single and double-pole rocker switches

H Series 1800 - Single and double-pole rocker switches Rocker switches Product features 100 million times proven switching principle High, flexible design variety Excellent actuating characteristic Illuminated

series Subminiature snap-action switches

Rocker switches Product features Small, efficient snap-action switches up to 10 (1.) A 20 V AC or 10.1 A 12-20 V AC 1/4 HP Lateral approach from both directions possible due to mushroom-shaped actuator

series Miniature snap-action switches

Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Rocker switches Product features Friction contact

SERIES SUBMINIATURE SNAP-ACTION SWITCHES

PRODUCT FEATURES Small, effi cient snap-action switch up to 10 (1.) A 20 V AC or 10.1 A 12-20 V AC 1/4 HP Lateral approach from both directions possible due to mushroom-shaped actuator Large selection

SERIES DOUBLE-POLE ROCKER SWITCHES IP 65 TO 20 (4) A 250 V AC

SERIES 190 - DOUBLE-POLE ROCKER SWITCHES IP 65 ROCKER SWITCHES SENSORS MICRO-SIGNAL SWITCHES SNAP-ACTION SWITCHES TACT AND KEY SWITCHES FOOT SWITCHES ROTARY SWITCHES SLIDE SWITCHES TOGGLE SWITCHES PUSHBUTTON

SERIES SINGLE AND DOUBLE-POLE PUSHBUTTON SWITCHES TO 16 (4) A / 12 (12) A 250 V AC

SERIES 10 - SINGLE AND DOUBLE-POLE TO 1 () A / 12 (12) A 250 V AC PRODUCT FEATURES Million times proven double lifting contact system wit at least 0 000 mecanical switcing cycles Hig electrical rating

Lever with adjusting screw. Lever simulated roller with. adjusting screw. and roller. Lever simulated roller. Spring lever bent Rotary shaft

APPROVAL MARKS ENEC VDE UL (USA) UL (USA + Canada) CSA (Canada) CSA (Canada + USA) TERMINAL SYMBOLS Quick-connect terminal Cable Solder terminal Terminal strip Short solder terminal Push-in terminal PCB

H Further information under.

Product CATALOg Switches & Sensors H www.marquardt-switches.com Further information under www.marquardt-switches.com Approval marks ENEC UL (USA) CSA (Canada) VDE UL (USA + Canada) CSA (Canada + USA) Terminal

Terminal Symbols. Quick-connect terminal. Socket terminal. Actuator symbols. Lever simulated roller with adjusting screw.

Approval marks ENEC UL (USA) CSA (Canada) VDE UL (USA + Canada) CSA (Canada + USA) Terminal Symbols Quick-connect terminal Solder terminal Short solder terminal PCB terminal PCB terminal angled left PCB

LUMOTAST 25 selector switch 1-28 LUMOTAST 25 selector switch, ring nut fixing LUMOTAST 25 keylock switch 1-30 LUMOTAST 25 keylock switch 1-31

TAST General data TAST pushbutton range Illuminable pushbuttons and signal lamps. Please order lamps/leds separately. Mounting hole diameter: 6.2 mm 42 V/00 ma max. Water-jet proof IP65 Low profile Lamp

General Specifications

Slides Rotaries Programmable Illuminated P Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level: 5A @ 25/250V AC or 5A @ 30V DC Other Ratings Contact Resistance: 0 milliohms

Devices raised mounting

Devices raised mounting Illuminated pushbutton actuator Illuminated pushbutton actuator Front protection Switching system Contacts Diode (1N 47) Switching action Terminals b 18 x 18 mm Typ-Nr. a 18 x 24

Devices raised mounting

Devices raised mounting Illuminated actuator pushbutton Front protection Switching system Ø 29 mm Contacts Typ-Nr. e Illuminated actuator pushbutton IP 67 LL 1 NC - MA UT 14-476.36 1 4 17 12.15 M UT 14-436.36

Distinctive Characteristics

Distinctive Characteristics Full face, bright LED illumination in choice of red, green, and amber for visible status indication. 9-amp or 6-amp electrical capacity in compact body. Interior shield prevents

PCB Keyswitches Product Survey Versions Recommended Key grid Illumination Keyswitch Signal indicator Keyswitch height Contacts RACON 8 12 mm Non-illum

PCB Keyswitches Page RACON short-travel keyswitches - 5 RACON 8-6 RACON 12-10 RACON 12 V with vertical adapter - 1 RACON 12 i - 16 RACON special accessories - 20 RF short-travel keyswitches - 23 RF 15

Contact form. Operating Force. Plunger SPDT 204g Dust- Proof (in closed position) Plunger SPST-NC 204g Dust- Proof (in closed position)

D3D Miniature Door Switch Appliance industry standard plunger and lever actuator styles High contact reliability ensured using gold alloy crossbar contacts Drip/spill sealing in free position (plunger

onlinecomponents.com

Power entry modules without line filter Felcom 64 IEC Appliance Inlet C14 with modular extended Components Plug removal necessary for fuse replacement 6421.005X.XX Appliance inlet Appliance outlet Snap-In

RACON short-travel keyswitches

General data short-travel keyswitches with sealed contact system and distinct key click, excellent switching reliability. For use under an overlay or with RK 90 keycaps. Print and SMD versions available

Item No.: /

Female connector; with angled solder pins; 4-pole; with locking levers; pin spacing 508 mm / 02 in; solder pin 06x mm; codable; Horizontal PCB mounting Item No: 232-264/039-000 Female connector; with angled

Contents Rockers. A Series... B4 Process Sealed 0.4VA Logic Level Straight, Right Angle, & Vertical PC

Contents Rockers Toggles Rockers Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons A Series... 4 Process Sealed 0.4VA Logic Level Straight,

POWER ROCKER SWITCH. Standard actuator type Wide actuator type UL/C-UL, ENEC/VDE UL/C-UL, ENEC/VDE

POWER ROCKER SWITCH SWITCHES AJ8 switch Standard actuator AJ8 switch Wide actuator FEATURES 1. Power rocker switches for safety requirements. All versions comply with ClassII EN61058-1 insulation grade.

LUMOTAST FK. General data. Content. Pushbuttons 1-9

General data TAST illuminated pushbutton range Illuminable pushbuttons and signal lamps with lamp socket T /T / 4. Please order lamps / LEDs separately. Mounting hole diameter 6.2 mm 42 V/00 ma max. Water-jet

General Specifications

Series M00 Tipped Rockers & Paddles Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement Accessories Indicators Tactiles Keylocks General Specifications Electrical

TYPICAL SWITCH ORDERING EXAMPLE BARRIER TYPES. R No Barrier B With Barrier CAP COLORS. A Black B Ivory. Red. H Gray INSCRIPTION ORIENTATION

TYPICAL SWITC ORDERING EXAMPLE JW L R C A M L RATINGS TV5 Rated 0A @ 5/50V AC TV8 Rated 6A @ 5/50V AC ARRIER TYPES R No arrier With arrier OUSING COLORS A lack POLES SPST SPDT * DPST DPDT * DPST must have

Distinctive Characteristics

Distinctive Characteristics Industry s first molded rocker with TV rating. Designed to handle large inrush current. JWM models certified for TV-5 rating and JWL models for TV-8 rating. Special 5A @ 7V

SPST-NO SPDT DPST-NO DPDT

Next-generation PCB Relay Available in Various Models ROHS compliant. High sensitivity: (250mW) and high capacity (16A) models available Low profile: 15.7 mm max. in height. Conforms to EN 61810-1, UL508

General Specifications

Series CW Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement ccessories Indicators Tactiles Keylocks General Specifications CWS CWS Electrical Capacity Power Level:

General Specifications

Series CW Miniature Power Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement ccessories Indicators Tactiles Keylocks General Specifications CWS CWS CWT

onlinecomponents.com

Short-Travel Switch MICON 5 SMT standard version SMT low version THT standard version Order no. Terminals Height [mm] Operating Force F1 [N] (+- 20% ) Switching Travel S2 [mm] (+- 0.15 mm) Operating life

Male connector; with fixing flanges; 6-pole; pin spacing 5.08 mm / 0.2 in; for screw or similar mounting types; for parallel or perpendicular mounting

Male connector; with fixing flanges; 6-pole; pin spacing 508 mm / 02 in; for screw or similar mounting types; for parallel or perpendicular mounting Item No: 231-636/019-000 Male connector; with fixing

8800 Thinline Rocker Switches 10A 250Vac

8800 Thinline Rocker Switches 0A 50Vac Ultra thin switch Ratings up to 5A, 50Vac Single and twin gang Panel cut out: Single 7.4 x 6.8 Twin 7.4 x 3.4 0(6)A 50Vac T00 6()A 50Vac T00 5E4 (50,000 Operations)

16 g SS-01GL-FD SS-01GL-F SS-01GL-FT 50 g SS-01GLD SS-01GLD1 SS-01GLD2 SS-01GL SS-01GLT Simulated roller lever

Snap Action Switch SS Subminiature Snap Action Switch Economical, subminiature snap action switch offers long service life (30 million operations minimum) All models are free from overtravel restrictions,

Contact form. Operating Force. SPDT 25g Unsealed Solder / 187 Quick Connect. SPDT 50g Unsealed Solder / 187 Quick Connect

VX Miniature Snap Action Switch Compact snap action switch with low force operation Internal mechanism assures outstanding contact reliability Models available for micro load up through 5 Amps ROHS Compliant

Custom-Designed Switches,

Custom-Designed Switches, Connectors and Assemblies NEW PRODUCT BULLETIN Mil Spec Connectors Full line of high density rectangular connectors QPL Approved to MIL-DTL-83503, MIL-DTL-24308 and MIL-DTL-28804

LED unit. Selection diagram LED COLOUR white LED red LED green LED blue LED orange LED INDICATION MODE CONNECTIONS MOUNTING TYPE

unit Selection diagram COLOUR 2 3 4 6 8 INDICATION MODE A continuous light L blinking light CONNECTIONS MOUNTING TYPE V clamping screws S solder connection P panel F housing bottom 85 Code structure Attention!

Contact form. Operating Force. SPDT 100g Unsealed Solder / 187 Quick Connect. SPDT 200g Unsealed Solder / 187 Quick Connect

V Miniature Snap Action Switch Industry standard design with 10/15 Amp ratings Long mechanical life of 50,000,000 operations minimum Available in either thermoplastic or thermosetting resin Can be used

Vandal-proof latching action switch MSM LA

Product Manual Vandal-proof latching action switch MSM LA CONTENTS 1 PRODUCT DESCRIPTION... 2 2 TECHNICAL DATA AND DIMENSIONAL DRAWINGS... 2 2.1 Technical Data... 2 2.2 Dimensional Drawings... 5 2.3 Hole

Miniature Relays Series M25 Type M25-1 pole 16 A Monostable

Miniature Relays Series M25 Type M25-1 pole 16 A Miniature size mm PCB mounting 5 kv / 10 mm insulation Switching capacity 16 A / 250 General purpose, industrial electronics Sealed according IP 67 Low

Safety controller unit B1 /

Version 1.0 Safety controller unit 470111B1 / For 2 to 16 safety sensors 470115B1 PL d in acc. with EN ISO 13849-1 / SIL CL 2 in acc. with EN IEC 62061 Two safety outputs and external contactor monitoring

Item No.: /

Angled female connector; with snap-in mounting foot; 3-pole; pin spacing 5 mm / 097 in; 00% protected against mismating; for panel mounting; Plate thickness 06x2 mm; Fixing holes 35 mm Ø Item Angled female

UP1-1WF UP1-3TF UP1-5TF UP1-8TF. Applications. Ambient temperature Operation Storage. Degree of protection: Accessible range:

Undervoltage protection switch, rocker or push button actuated, 2-pole UP1-1WF UP1-3TF UP1-5TF UP1-8TF Description 2-pole switch with undervoltage release and restart protection Remote trip version Rocker

MAIN PRODUCTS. To provide value product which satisfy customer in Quality, Reliability, Performance and Durability.

ELECTROPLATING To provide value product which satisfy customer in Quality, Reliability, Performance and Durability. To strive continuously to improve quality through Kaizen, employee safety & motivation,

Switches and Indicators.

E1 Switches and Indicators Switches and Indicators Series Description Product Assembly Product Range - pushbutton for standard mounting - accessories / spare parts Technical Data Technical Drawing /Dimension

D2SW-3L1HS D2SW-01L1HS

Sealed Snap Action Switch D2SW Watertight Miniature Snap Action Switch High-quality watertight miniature Snap Action switch. Switch Body meets IP67 (IEC 529) requirements Monoblock construction assures

RM84 / RM85 / RM87 Miniature Electromagnetic Relays

Miniature dimensions Cadmium - free contacts 5000 V / 10 mm reinforced insulation For PCB and plug-in sockets Available special versions with the increased dielectric strength of the contact clearance

Switches and Indicators 84

Switches and Indicators 84 84 Switches and Indicators Index Series 84 Description Page 177 Product Assembly Page 178 Mounting Instruction Page 179 Product Range - pushbuttons for flush mounting - accessories

Distinctive Characteristics

Tilt Switch Series DS Distinctive Characteristics DSA Environmentally friendly, contains no mercury. High contact reliability due to sealed body. The switch is triggered when tilted beyond ±10 of the horizontal.

Indicator, round, raised, full face with plastic matt chrome bezel, 22.5 mm mounting, lamp block included. Yellow Green

22.5 mm 3.5 mm IP65 1 A 66 VAC Choose one component from each of the coloured sections to assemble a complete switch. For other options or further information please contact your local sales office. INDICATOR

SUNCLIX Connection technology for photovoltaics

SUNCLIX Connection technology for photovoltaics Connection technology for photovoltaics Are you looking for innovative and reliable connection technology for your PV modules, inverters or the complete

Products :: Circuit Protection :: Hydraulic/Magnetic Circuit Breakers

Products :: Circuit Protection :: Hydraulic/Magnetic Circuit Breakers Miniature Hydraulic/Magnetic Circuit Breaker M-Series M-Series PDF elibrary The M-Series miniature hydraulic/magnetic circuit breakers

Male connector; 6-pole; pin spacing 3.5 mm / in; 100% protected against mismating

Male connector; 6-pole; pin spacing 35 mm / 0138 in; % protected against mismating Item Male connector; 6-pole; pin spacing 35 mm / 0138 in; % protected against mismating Marking Business data Supplier

Miniature Basic Switch

Miniature Basic Switch Reliable and Safe Basic Switch Self-cleaning contacts. Best-seller Switches with switching currents of 10 to 21 A. Can be used for shutting down current in doors. Widely used for

FTR-K1 Series 1 POLE - 16A 105 C POWER RELAY FTR-K1 SERIES

FTR-K1 SERIES POWER RELAY 1 POLE - 16A 105 C FTR-K1 Series FEATURES Low profile (height: 15.7mm) HIGH INSULATION Insulation distance (between coil and contacts): 10mm min. Dielectric strength: 5KV Surge

Item No.: /

mounting adapter also for DIN 35 rail; % protected against mismating; Plate thickness 06x12 mm; Male connector; with snap-in mounting foot; 4-pole; pin spacing 35 mm / 0138 in; with 209-137 mounting adapter

Safety control unit B1 / B1. for 2 to 16 machine safety sensors. Use. Types. + PLd according to EN ISO

Safety control unit for 2 to 16 machine safety sensors 470 121 B1 / 470 125 B1 + PLd according to EN ISO 13849-1 + two safety outputs and external contactor monitoring + for sensors with N.O./N.C. system

ZB5FG09 flush mounted selector switch head key pos stay put

Characteristics flush mounted selector switch head key 455 3 pos stay put Main Range of product OsiSense XC Series name Standard format Product or component type Limit switch Device short name XCKJ Sensor

Better all-round. DataVoice Circular connectors STX M12x1 IP67 Connector series for industrial applications. PoE+ 10 GBE. coded.

Better all-round. X coded D coded 10 GBE PoE+ DataVoice Circular connectors STX M12x1 IP67 Connector series for industrial applications STX M12x1 IP67 connector series With the STX M12x1 IP67 connector

Control Units Ex e in Stainless Steel LCS*.*

Features Assembly Stainless steel enclosures Suitable for operation in Zones 1, 2, 21 and 22 Certified Ex de and Ex tb Up to 4 operators per control unit, base-mounted contact blocks Wide choice of operators,

V REG.-Nr. 3919, Z E214024

General Purpose Relays SCHRACK Miniature Power PCB Relay MSR 1 pole 8 / 10 A, 1CO or 1NO contact High inrush currents with AgSnO contacts (TV4 = 65 A) 4 kv/8 mm coil-contact Reinforced insulation (protection

RUC industrial relays of small dimensions

RUC industrial relays of small dimensions 135 with adaptor (V) Contact data Number and type of contacts Contact material Rated / max. switching voltage Min. switching voltage Rated load Min. switching

Microswitches MS Series

General purpose microswitches for heavier duty applications High precision snap action mechanism 16A 250V AC resistive rating (I th ) Wide range of actuator styles Screw terminals with self lifting plate

Modular PCB terminal block; 2 solder pins/pole; 1-pole; pin spacing 5/5.08 mm / 0.2 in; with push-button

push-button - Item No: 255-40 Modular PCB terminal block; 2 solder pins/pole; -pole; pin spacing 5/508 mm / 02 in; with push-button Item No: 255-40 Modular PCB terminal block; 2 solder pins/pole; -pole;

SUBMINIATURE MICROSWITCHES - SEALED

SWITCHES.COUZET.COM MICOSWITCHES SUBMINIATUE MICOSWITCHES - SEALED VS - 88 Coil spring snap-action mechanism Wire lead or cable outputs, various terminal types with symmetric or asymmetric pinning Excellent

XCKS141H29 limit switch XCKS - th.plastic roller lever var. length - 1NC+1NO - snap - M20

Characteristics limit switch XCKS - th.plastic roller lever var. length - 1NC+1NO - snap - M20 Main Range of product OsiSense XC Series name Standard format Product or component type Limit switch Device

D2D. Door Interlock Switch. Ordering Information. Power Switch with Minimum Contact Gap of 3 mm. Model Number Legend.

Door Interlock Switch Power Switch with Minimum Contact Gap of 3 mm Offers the minimum contact gap of 3 mm required for power switches as standard equipment. Highly reliable design conforms to European

Data sheet. 25Gmodul. Illustrations P/N 130B11-25-E EAN Product specification. Page 1/ Dimensional drawing

Page 1/6 Illustrations Dimensional drawing Cut-out See enlarged drawings at the end of document Product specification certified by GHMT according to DTR-11801-9905 for 25GBASE-T in the Channel-Link with

RUC industrial relays of small dimensions

Contact data Number and type of contacts Contact material Rated / max. switching voltage Min. switching voltage Rated load Min. switching current Max. inrush current Rated current Max. breaking capacity

ABB i-bus KNX Switch Actuator, x-fold, 6 A, MDRC SA/S x.6.1.1, 2CDG x R0011

, 2CDG 110 15x R0011 SA/S 12.6.1.1 2CDC 071 033 S0012 The 6 A Switch actuators are modular installation devices in Pro M Design for installation in the distribution board. The devices are suitable for

Female connector; 2-pole; pin spacing 5 mm / in; codable; only 1 locking latch; with coding finger; with latch

Female connector; 2-pole; pin spacing 5 mm / 097 in; codable; only locking latch; with coding finger; with latch Item No: 23-02/026-000 Female connector; 2-pole; pin spacing 5 mm / 097 in; codable; only

XCKS131 limit switch XCKS - thermoplastic roller lever - 1NC+1NO - snap action - Pg13

Characteristics limit switch XCKS - thermoplastic roller lever - 1NC+1NO - snap action - Pg13 Product availability : Non-Stock - Not normally stocked in distribution facility Price* : 80.00 USD Main Range

Applications

Han PCB adapter Contents Page Technical characteristics PCB adapter for Han DD... 20.02 Han DD Inserts with PCB adapter... 20.03 Technical characteristics PCB adapter for Han E... 20.04 Han E Inserts with

8 mm series. General data. Content. Pushbuttons 1-3

General data Illuminable pushbuttons and signal lamps with lamp socket for a mounting hole diameter of 8. mm; 42 V, 250 ma Please order lamps/leds separately. Content series, illuminated pushbutton, 42

Reliable Switch Solutions for the Medical Industry

Reliable Switch Solutions for the Medical Industry SmartSwitch Product Line with Programmable Displays Electrical Rating: 100mA @ 12V DC IP Rating: IP64 (OLED Rocker) Most extensive product line in the

DC11. Power entry modules without line filter IEC Appliance Inlet C14 or C18 with Line Switch 1- or 2-pole C14 C18

DC IEC Appliance Inlet C4 or C8 with ine Switch - or -pole C4 C8 70 C 70 C Description - Panel Mount: Screw-on version from front or rear side, snap-in version from front side - Functions: Appliance Inlet

D2VW. Sealed Miniature Basic Switch. Ordering Information Model Number Legend D2VW- -

Sealed Miniature Basic Switch Sealed Miniature Basic Switch Conforms to IP67 (Molded Lead Wire Type Only) Use of epoxy resin assures stable sealing, making this switch ideal for places subject to water

Data sheet C6 A modul 90 jack

Illustrations Dimensional drawing Cut-out Page 1/7 See enlarged drawings at the end of document Product specification modular Cat.6 A termination unit RJ45 mounting version: module, 90 cable feed solid,

Sensor boxes SRBC. Festo core product range Covers 80% of your automation tasks

Sensor boxes SRBC q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity

Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. HIGH POWER CONNECTORS Panel Mounts and Cord Plugs HPC Series Switchcraft

XCKP2145N12 limit switch XCKP - th.plastic roller lever var.length - 1NC+1NO - snap - 1/2NPT

Characteristics limit switch XCKP - th.plastic roller lever var.length - 1NC+1NO - snap - 1/2NPT Main Range of product OsiSense XC Series name Standard format Product or component type Limit switch Device

8 mm Series. General data. Content

General data Illuminable pushbuttons and signal lamps with lamp socket for a mounting hole diameter of 8. mm; 42 V, 250 ma Please order lamps/leds separately. Content Series, illuminated pushbutton, 42

Magnetic and Hydraulic-Magnetic Circuit Breaker 8340-F...

Magnetic and Hydraulic-Magnetic Circuit Breaker 830-F... Description Single and multipole magnetic circuit breakers with trip-free mechanism and toggle actuation. A choice of fast magnetic only or hydraulically

Magnetic and Hydraulic-Magnetic Circuit Breaker 8340-T...

Description ngle, two and three pole magnetic and hydraulic-magnetic circuit breakers with trip-free mechanism and toggle actuation. A choice of fast magnetic only hydraulically delayed switching characteristics

Magnetic and Hydraulic-Magnetic Circuit Breaker

Description Single or multipole hydraulic-magnetic circuit breakers with trip-free - mechanism and toggle actuation. A choice of switching characteristics ensures suitability for a wide range of applications.

Magnetic and Hydraulic-Magnetic Circuit Breaker 8340-F...

Description Single and multipole magnetic circuit breakers with trip-free mechanism and toggle actuation. A choice of fast magnetic only or hydraulically delayed switching characteristics (S-type MO or

PCB Keyswitches NEW. KN 19 - Short-travel main switch 4-85 KN 19 - Short-travel main switch 4-86

Page MICON 5 - Short-travel keyswitches - 3 MICON 5 - Short-travel keyswitches - MICON 5 - Plungers round, not illuminable - 8 MICON 5 - Plungers square, illuminable - 12 NEW RACON - Short-travel keyswitches

RUC industrial relays of small dimensions

with adaptor (V) with adaptor (H) Power relays of general application AC and DC coils Mounting: in sockets; 35 mm rail mount acc. to PN-EN 60715; on panel; PCB Versions: faston 187 (4,8 x 0,5 mm); faston

FTR-K2G Series. 1 POLE - 20A, 3.0mm contact gap POWER RELAY FTR-K1 SERIES

POWER RELAY FTR-K1 SERIES 1 POLE - 20A, 3.0mm contact gap FTR-K2G Series FEATURES Contact gap min. 3.0mm Full disconnection 1 Pole, 1 Form A Maximum inrush current 120A (TV-8) (UL) (VDE) High insulation

XCKJ10541H29 limit switch XCKJ - th.plastic roller lever var. length - 1NC+1NO - snap - M20

Characteristics limit switch XCKJ - th.plastic roller lever var. length - 1NC+1NO - snap - M20 Main Range of product OsiSense XC Series name Standard format Product or component type Limit switch Device

A K - J 3ML - 2

Key-type Selector Switch A165K Mounting Aperture of 16 mm Modular construction Oil-resistant IP65 models UL and cul approved. Conforms to EN60947-5-1, IEC947-5-1 Short mounting depth, less than 28.5 mm

High-density multi-pin connectors

High-density multi-pin connectors Mating and mounting conditions to DIN 41612/IEC 60603-2 General With the ever increasing miniaturization and higher packaging densities in highly integrated circuits there

Argent Angel S series PCB Soldering Power Transformers

Argent Angel S series PCB Soldering Power Transformers LI017V1/2008-EN 1. Features 1 Fully-encapsulated printed circuit board being able to be directly welded and assembled. easy to use, perfect outline;

Safety Relay H-464. Dimensions LxWxH(in mm) Size 3: 77,4 x20,5 x48,6 Size 4: 87,4 x20,5 x48,6

General 8or 10 contacts Forced guided contact set According to EN 50205, application type A Ambient temperature 25 +80 C Soldering heat resistance 260 C/5s RoHS compliance Signal relay according to UIC

J8 SWITCHES WITH TRIP FUNCTION UPGRADED TYPE

POWER ROCKER SWITCH J8 SWITCHES WITH TRIP FUNCTION UPGRADED TYPE FEATURES 1. Power switches with an electromagnetic reset function which meet the need for energy savings in equipment and for safety. Applications

Safety switches with separate actuator

4 Safety switches with separate actuator Selection diagram VF KEYD VF KEYD1 VF KEYD VF KEYD VF KEYD VF KEYD6 VF KEYD VF KEYD10 ACTUATORS CONTACT BLOCKS 6 snap action overlapped FR FX FK FW 0 1 4 NC NO+1NC

VZBs. Power PCB Relay RT2 2 pole 8 A, DC and AC-coil. Features. Contact data

Features 2 C/O or 2 N/O contacts Sensitive coil 400 mw DC- or AC-coil 5 kv / 10 mm coil-contact Protection class II (VDE 0700) Height 15.7 mm Sockets with PCB-type or screw-type terminals Applications

Product and functional description

Product and functional description The instabus / DAI gateway 141 is a KX EIB device with one DAI output to which up to 64 DAI actuators (e.g. DAI ballasts) can be connected to. It is not allowed to connect

General Specifications

Series Process Sealed Subminiature Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers General Specifications Electrical Capacity

Operating voltages up to 40 kvdc Operating current up to 30 Amps Advanced contact technology Silver plated and gold plated contacts available High

Operating voltages up to 40 kvdc Operating current up to 30 Amps Advanced contact technology Silver plated and contacts available High performance insulation material General characteristics and technical

PERFORMANCE SPECFICATION SWITCH, PUSH BUTTON, ILLUMINATED GENERAL SPECIFICATION FOR

INCH-POUND 21 January 2005 PERFORMANCE SPECFICATION SWITCH, PUSH BUTTON, ILLUMINATED GENERAL SPECIFICATION FOR This supplement forms a part of, dated 21 January 2005. SPECIFICATION SHEETS * MIL-S-22885/1H