SC SERIES. Up to 16 I/O devices can be connected at once using MIL connectors. Sensor-PLC Connection System WIRE-SAVING UNITS.
|
|
- Cornelius Sims
- 6 years ago
- Views:
Transcription
1 SERIES Sensor-PLC Connection System Up to 6 I/O devices can be connected at once using MIL connectors Conforming to EMC Directive Up to 6 I/O devices can be connected at once using MIL connectors Up to 6 fiber sensors, like the FX-0/0/0/ series, can be connected without tools in a main unit. Also, dispersed mounting is possible using a separate unit. In addition, using the connector input / output extension unit, photoelectric sensors, micro photoelectric sensors, inductive proximity sensors, pressure sensors, or any other type of sensor or switch can be one-touch connected to an output device. Custom circuit board Photoelectric sensor Inductive proximity sensor PLC SL-CP/CP/CP Cylinder switch Micro photoelectric sensor -TJ / -TJ-P FX-0/0/0/ series -T8J / -T8J-P / -S MIL connector cable Example: This shows how the wiring for I/O devices dispersed on either side of processing machines can be wire-saved using the series. 876
2 ORDER GUIDE Designation Appearance Model No. Description Main unit Separate unit -channel connector input extension unit -S -TJ -TJ-P The MIL connector allows up to 6 input / output device connections to a PLC or custom circuit board, in a single step. Distributed installations are possible through the use of a main unit and MIL connectors. Allows the connection of input device, such as sensor or switch. Incorporates a power indicator and an input signal indicator ( ch). 8-channel connector input extension unit -T8J -T8J-P Allows the connection of input devices, such as sensors or switches. Incorporates a power indicator and input signal indicators (8 ch). 8-channel connector I/O mixed extension unit Allows the connection of a variety of input and output devices. This unit does not contain input / output signal indicators. This one-touch connector is used to connect the main unit to the following devices: The FX-0/0/0/ series fiber sensors, the FX-CH series bank selection unit and the -TJ(-P) -channel connector input extension unit. 4-pin type snap male connector SL-CP (White) 0 pcs. per set SL-CP (Black) 0 pcs. per set SL-CP (Greenish blue) 0 pcs. per set For 0.08 to 0. mm (Conductor cross-section area) "0.7 to ". mm "0.08 to in For 0. mm (Conductor cross-section area) ". to ".6 mm "0.04 to 0.06 in For mm (Conductor cross-section area) ".7 to ".5 mm "0.067 to in Snap male connectors are utilized to connect input / output devices to both the -channel and the 8-channel connector input units, as well as to the 8-channel connector combined input / output unit. The -channel connector input extension unit includes one SL-CP. End plates MS-DIN-E Two pcs. per set After the series units have been attached to the DIN rail, all these devices must be secured firmly together by placing end plates at each of the ends and sandwiching the devices in between. Ensure that these end plates are used for this purpose. OPTIONS Designation Model No. Description -MA 0 sheets per set An identifier for each connector should be marked on each seal, then the seals should be applied to the number plates attached to both the 8-channel connector input unit and the 8-channel connector input / output unit. -MA Numbering plate -PK 8 pcs. per set are utilized to protect the unconnected ends of connectors, for both the 8-channel connector input unit and the 8-channel connector input / output unit. -MA Note: For device connections, using the Matsushita Electric Works, Ltd. MIL connector attached cable is most recommended. Connect in a way so that the 0-core connector links up with the 6-channel unit. Please consult with the maker directly for details. Fitted with a crimp terminal (0-core) 0-core 0-core Double-end MIL connector attached cable (0-core) Matsushita Electric Works, Ltd. AY5840, etc. PC relay terminal / PC terminal additional mounting cable 0-core One-end MIL connector attached cable (0-core) Matsushita Electric Works, Ltd. AY585, etc. Multi-core crimp terminal cable for relays Compatible with Matsushita Electric Works, Ltd. MIL connector relay terminal pin arrangement. Please consult with the maker directly for details. -PK -PK 877
3 SPECIFICATIONS Sensor units Item Allowable through current (Note ) Model No. Max. distance between units Pollution degree Ambient temperature Main unit to 4 V DC 0 % (Note ) In combination with, the unit can be also used with a power supply of 5 to 4 V DC 0 %. A or less Same as maximum permissible current consumption of all units connected to. Separate unit -S Depends on the supply voltage from A or less Same as maximum permissible current consumption of all units connected to -S. ( ) Connectable up to 6 channels The signal from up to 6th point (counting from unit adjacent to ) of all units connected to is transferred. However, the signal thereafter is not transferred. Note that -S does not occupy any signal point. 0 m.808 ft or less (the distance between and PLC and that between and -S put together) (Industrial environment) 0 to 45 C 4 to F (No dew condensation or icing allowed), Storage: 0 to 70 C 4 to 58 F 5 to 85 % RH, Storage: 5 to 85 % RH Enclosure: Heat-resistant ABS Accessory 5 g approx. Connector protection seal: pc. 0 g approx. Notes: ) The plug-in sensor main unit incorporates a cable lead-out connector in addition to the MIL connector, which allows to receive the supply voltage from the separate power supply. Notes: ) Same as maximum permissible current consumption of all units connected to. When either the permissible current amount of power supply unit or the permissible current amount of cable to be connected is A or less, adjust the current to the smallest value. Item Model No. Applicable unit Supply current for units Refer to the list of Applicable unit of non-line connector Depends on the supply voltage from (Note) 00 ma or less channel 0 to 45 C 4 to F Ambient temperature (No dew condensation or icing allowed) Storage: 0 to 70 C 4 to 58 F 5 to 85 % RH, Storage: 5 to 85 % RH Enclosure: ABS 4 g approx. Note: In case the FX-0/0/0/ series is connected in cascade, the supply voltage should be to 4 V DC 0 % ripple P-P 0 % or less. Applicable unit of non-line connector Designation Model No. Description -channel input extension units Digital fiber sensors (Note) Manually set fiber sensors Digital fiber sensors for leak detection fiber / liquid detection fiber Bank selection unit -TJ -TJ-P FX-0(B/G/H) FX-0(B/G/H)P FX-0 FX-0P FX-0 FX-0P FX-(B/G) FX-(B/G)P FX-0-F FX-0P-F FX-CH FX-CH-P For NPN input devices For PNP input devices Note: For details, refer to the FX-0 series on p.66l, the FX-0(P) on p.6l, the FX-0(P) on p.8l, the FX- series on p.5l, the FX-0(P)-F on p.598l and the FX-CH(-P) on p.44l. 878
4 SPECIFICATIONS Connector extension units Item Current consumption (Note ) Connectable device Model No. Supply current for units (Note 6) Connector input extension unit Connector I/O mixed extension unit channel 8 channels channel 8 channels 8 channels -TJ -T8J -TJ-P-T8J-P 0 ma or less input NPN open-collector, or DC -wire output type sensor, or switch etc. 00 ma or less to 4 V DC 0 % 5 to 4 V DC 0 % (Note ) 60 ma or less 8 inputs (Note ) NPN open-collector output sensor or switch etc. (Note 5) 0 ma or less input PNP open-collector, or DC -wire output type sensor, or switch etc. 00 ma or less 60 ma or less 8 inputs (Note ) PNP open-collector output sensor or switch etc. (Note 5) 7 ma or less 8 inputs / outputs (Note 4) Commercial I/O device Power indicator Input indicator Ambient temperature Accessories Green LED (Lights up when the power is ON) Green LED [: 8 Nos.] (Lights up when each channel input is ON) 0 to 45 C 4 to F (No dew condensation or icing allowed), Storage: 0 to 70 C 4 to 58 F 5 to 85 % RH, Storage: 5 to 85 % RH Enclosure: Heat-resistant ABS 0 g approx. 40 g approx. 0 g approx. 40 g approx. 40 g approx. SL-CP (Snap male connector): pc. -MA (Index seal): pc. SL-CP (Snap male connector): pc. -MA (Index seal): pc. Notes: ) It depends on the power supply from. Notes: ) The current consumption and input current of the input unit connected are not included. Notes: ) The signal for 8 channels is occupied regardless of number of input units connected. 4) The signal for 8 channels is occupied regardless of number of I/O units connected. 5) DC -wire type sensor and switch etc. cannot be connected. 6) Set the maximum current passing through input / output line to 50 ma or less. I/O CIRCUIT AND WIRING DIAGRAMS -S Pin layout diagram for MIL connector pins Mark on connector for pin number 0 Signal 7 Signal 6 Signal 5 Signal 4 Signal Signal Signal Signal 0 Description Pin Number Pin Number Description Signal 5 Signal 4 Signal Signal Signal Signal 0 Signal 9 Signal 8 mthe MIL connector pin layout is compatible with SL-BMW sensor block, which is utilized to simplify wiring and save space. m (pin No.0 and 0) and (pin No. 9 and 9) are connected inside the block. -TJ -T8J Snap male connector pin position Pin No. -TJ(-P) 4 Input minput Input Not connected Snap connector side Input 4 Input indicator To 50 ma (Note) mfor DC -wire type input device [-TJ(-P) only] Note: Residual voltage: V or less Conditions (at 50 ma sink current) Leak current : ma or less (when the power is OFF) Offset voltage : V or less (when the power is ON) The product of which the load current range contains 5 to 8 ma. -TJ-P -T8J-P Snap male connector pin position Pin No. Signal 4 Not connected Snap connector side To Signal Signal Not connected Snap male connector pin position Snap connector side Pin No. -TJ(-P) Input Input Input 4 minput Not connected Input 4 indicator To 50 ma (Note) mfor DC -wire type input device [-TJ(-P) only] Note: Residual voltage: V or less Conditions (at 50 ma source current) Leak current : ma or less (when the power is OFF) Offset voltage : V or less (when the power is ON) The product of which the load current range contains 5 to 8 ma. 879
5 GND GND PRECAUTIONS FOR PROPER USE This product does not possess control functions needed for accident prevention or safety maintenance. DIMENSIONS (Unit : mm in) The CAD data in the dimensions can be downloaded from the SUNX website: Model No. nameplate.7 9 (Concave side) (44.7) (.760) MIL connector (0P) Power supply connector With power supply cover removed. -T8J/TP8J -T8J-P (Convex side) Power indicator (Green) (Concave side) Connector for SL-CP/CP/CP connection (7.5 8).6 (0.95 8) (7.5 7).067 (0.95 7) input indicators (Green) not incorporate does these indicators Numbering plate -S TJ -TJ-P Input indicator (Green) Power indicator (Green) (44.7) (.760) Model No. nameplate MIL connector (0P).7 9 (Convex side) connector for SL-CP/CP/CP connection IN power connector port 880
panasonic.net/id/pidsx/global Up to 16 I/O devices can be connected at once using MIL connectors
987 PHOTO PHOTO Sensor- Connection System SERIES Related Information General terms and conditions... F-3 LS-500 / LS-400 / DPS-400 / GA-311...P.201~ / P.213~ / P.745~ / P.851~ FX-500 / FX-300 / FX-410
More informationPlug-in unit extension block One sensor extension block allows four plug-in units to be added. Power cable for sensors. Snap-connector inputs
1 Sensor Block for SC Quick connection of 16 sensors Set of 16 inputs directly hooked up to PLC Up to 16 sensors can be connected on one main block followed by three extension blocks (or one snapconnector
More informationPM-24 SERIES. Ultra-small U-shaped Micro Photoelectric Sensor. Extremely small size enables space saving!! ( ) Equipped with two independent outputs
19 Ultra-small Micro Photoelectric Sensor PM- SERIES Related Information General terms and conditions...p.1 Glossary of terms / General precautions...p.98~ / P.98~ Amplifier Built-in Sensor selection guide...p.11~
More informationPM2 SERIES. Convergent Reflective Micro Photoelectric Sensor. Convergent reflection sensing ensures stable detection. Hardly affected by background
PHOTO PHOTO USE MEASUREMENT STATIC CONTROL Micro Photoelectric SERIES Related Information General terms and conditions... F- Glossary of terms... P.39~ selection guide... P.~ General precautions... P.0
More informationOptimum sensing capability for LCD manufacturing
SENSORS FOR Glass Substrate Detection Sensor Amplifier-separated FX-301-F FT-F9 FD-F7 EX-F70/F60 HD-T1 M FD-L3 Reliable detection of glass substrates Its unique optical system enables detection of transparent
More informationLink digital sensors directly to open networks
971 Unit for Open Network SERIES Related Information General terms and conditions... F-3 LS-500 / LS-400 / DPS-400... P.201~ / P.213~ / P.745~ FX-500 / FX-300...P.85~ / P.149~ General precautions... P.1595
More informationUltra-small U-shaped Micro Photoelectric Sensor. Extremely small size enables space saving!! 12 mm in
1 Ultra-small Micro Photoelectric PM- SERIES Related Information General terms and conditions... F-17 Glossary of terms / General precautions... P.19~ / P.10 Amplifier Built-in selection guide... P.1~
More informationConnector Built-in U-shaped Micro Photoelectric Sensor. Approximately 60 % of previous model Detachable
44 Connector Built-in Micro Photoelectric SERIES Related Information General terms and conditions... F-1 Glossary of terms... P.1~ selection guide... P.441~ General precautions... P.140 Amplifier Built-in
More informationSERIES. FX-311 realizes the ultimate in ease-of-operation. Its operation enables easy and full use of latest technology.
FX-11 SERIES FX-11 realizes the ultimate in ease-of-operation. Its operation enables easy and full use of latest technology. Presenting a product which satisfies professionals using volume control. Besides
More informationMonitor. Safety relay,etc. Contactor, etc. Uses external device monitoring function Note: Construct a separate reset input circuit.
Selectable safety circuits The light curtain unit has a built-in monitoring function for external devices (such as fused relay monitoring). This supports the construction of light curtain peripheral safety
More informationColor Detection Fiber Sensor FZ-10 SERIES. Reliable and precise color discrimination. Red, green and blue LEDs. Easy set up
79 Color Sensor FZ- SERIES FIBER PHOTO MICRO PHOTO AREA LIGHT CURTAINS Related Information General terms and conditions... F-17 Glossary of terms... P.1359~ Sensor selection guide...p.31~ General precautions
More informationConvergent Reflective Micro Photoelectric Sensor
EQ- VF NX PM MS-AJ RT- PX- CY PHOTOELECTRIC SENSORS Mounting Stand Amplifier Built-in SERIES Convergent Reflective Micro Photoelectric Stable detection by convergent reflective mode Stable detection characteristics
More informationEF-S1 SERIES. Continuously check invisible static electricity in lines. Constantly check static in lines!
1215 PHOTO PHOTO SAFETY USE SERIES Related Information General terms and conditions... F- General precautions... P.1595 guide... P.1155~ MEASUREMENT panasonic.net/id/pidsx/global Continuously check invisible
More informationGA-311 GH SERIES. Compact Inductive Proximity Sensor Amplifier-separated. High-speed response and excellent workability
82 PHOTO PHOTO Compact Inductive Proximity Sensor -separated GA- SERIES General terms and conditions... F-7 Related Information Glossary of terms... P.86~ Sensor selection guide... P.757~ General precautions...
More informationE3S-A. Built-in Amplifier Photoelectric Sensor (Medium Size) Ordering Information. Built-in Amplifier Photoelectric Sensors. Horizontal. 7 m.
Built-in Amplifier (Medium Size) ES-A Be sure to read Safety Precautions on page 0. Ordering Information Built-in Amplifier s Red light Infrared light Sensing method Appearance Connection method Sensing
More informationGA-311 GH SERIES. Compact Inductive Proximity Sensor Amplifier-separated. High-speed response and excellent workability. IP67G sensor head variations
875 PHOTO PHOTO IT FOW PARTICUAR Compact Inductive Proximity Sensor -separated GA- SERIES General terms and conditions... F-7 Related Information Glossary of terms... P.482~ Sensor selection guide... P.80~
More informationUltra-slim Body Picking Sensor NA1-PK5 SERIES NA1-5 SERIES. Even a slim hand is detectable by the 25 mm in pitch beam area sensor
487 FIBER PHOTO MICRO PHOTO AREA IGHT CURTAINS PRESSURE / FOW INDUCTIVE PROXIMITY PARTICUAR USE SENSOR SIMPE UNITS MEASUREMENT STATIC CONTRO DEVICES ENDOSCOPE MARKERS Ultra-slim Body Picking Sensor NA-PK5
More informationAdjustable Range Reflective Photoelectric Sensor Amplifier Built-in
36 FIBER PHOTO MICRO PHOTO AREA LIGHT CURTAINS PRESSURE / FLOW INUCTIVE PROXIMITY PARTICULAR USE SENSOR SIMPLE UNITS MEASUREMENT STATIC CONTROL EVICES ENOSCOPE MARKERS Adjustable Range Reflective Photoelectric
More informationPM2 SERIES. Convergent Reflective Micro Photoelectric Sensor. Convergent reflection sensing ensures stable detection
3 Micro Photoelectric PM SERIES Related Information General terms and conditions...p. Glossary of terms...p.983~ selection guide...p.~ / P.9~ General precautions...p.98~ Amplifier Built-in PHOTO PHOTO
More informationOne step ahead in performance and mounting ease
95 Micro Photoelectric Amplifier Built-in PM-5 SERIES PM-45 SERIES PM-5 SERIES General terms and conditions... F- guide... P.9~ Related Information Glossary of terms / General precautions...p.1549~ / P.155~
More informationOption 2. Nil. Note 1) Option 1. Note With waterproof seal and mounting screw. With waterproof seal and mounting screw. 48 conversion adapter
Series 0-PSE00 RoHS Remote Type Multi-Channel Digital Pressure Sensor Controller How to Order Clean series 0 PSE0 0 M Input/Output specifications 0 NPN 5 outputs + Auto shift input PNP 5 outputs + Auto
More informationDC 2-wire Cylindrical Inductive Proximity Sensor
SERIES DC -wire Cylindrical Inductive Proximity -wire type available Oil resistant Metal embedding possible Amplifier Built-in GX G-6 High performance & ease of use G-8/8U GA-/GH GX GX-N G-8H/8H G-N Robust
More informationRemote I/O Unit with Connectors for Light Curtain CC-Link Safety System. panasonic.net/id/pidsx/global
715 LIGHT CURTAINS / USE Remote I/O Unit with Connectors for Light Curtain CC-Link System General terms and conditions... F-7 Related Information... P.703~ SF4B... P.565~ General precautions... P.1501
More informationPM2 SERIES. Convergent Reflective Micro Photoelectric Sensor. Convergent reflection sensing ensures stable detection
3 Micro Photoelectric PM SERIES Related Information General terms and conditions... F-3 Glossary of terms... P.~ Amplifier Built-in selection guide... P.7~ General precautions... P.8~ PHOTO PHOTO Conforming
More informationDC 3-wire Cylindrical Inductive Proximity Sensor. Long sensing range
INDUCTIVE SERIES DC 3-wire Cylindrical Inductive Proximity Oil resistant Metal embedding possible Amplifier Built-in GX G-6 High performance and environmental resistance at low price G-8/8U GA-/GH GX GX-U/FU
More informationPRODUCT INFORMATION. G6 Global Sensor. Beyond the standard Global sensor the economic way to business class
PRODUCT INFORATION G6 Global Sensor Beyond the standard Global sensor the economic way to business class GTB6 Background suppression photoelectric sensor Sensing distance 25 mm Photoelectric proximity
More informationNA1-5. Ultra-slim Body 25mm Beam Pitch Area Sensor. Even a Slim Hand Is Detected by the 25mm Pitch Beam Curtain AREA SENSORS.
Ultra-slim Body 2mm Pitch Area Sensor mm Thick: /2 of Conventional Model It fits into a small space, without obstructing normal operation. Clearly Visible Job Indicator Both the emitter and the receiver
More informationCompact Inductive Proximity Sensor
SERIES Compact Inductive Proximity Sensor Amplifier Built-in High functionality together with robust housing and flexible cable Miniature is an amplifier built-in inductive proximity sensor having a diameter
More informationE3X-NA. Adjuster type standard that is the culmination of true ease and simplicity. Super Manual Fiber Amplifier. Features
Super Manual Fiber Amplifier Adjuster type standard that is the culmination of true ease and simplicity Features Self-explanatory LED bar displays of light levels The previous manual type used the stability
More informationPM2 SERIES. Convergent Reflective Micro Photoelectric Sensor. Convergent reflection sensing ensures stable detection
PHOTO PHOTO Micro Photoelectric PM SERIES Related Information General terms and conditions... F-3 Glossary of terms... P.9~ Amplifier Built-in guide... P.393~ General precautions... P.~ Certified MEASURE
More informationGX SERIES. Cylindrical Compact Inductive Proximity Sensor Amplifier Built-in. Robust enclosure and flexible cable types are also available
8 Cylindrical Compact Inductive Proximity SERIES Related Information General terms and conditions... F-7 Glossary of terms... P.86~ selection guide... P.757~ General precautions... P.05 PHOTO PHOTO Conforming
More informationHead-separated Dual Display Digital Pressure Sensor DPC-L100 SERIES DPH-L100 SERIES. High-precision detection of fluid and air pressure
689 PHOTO PHOTO Dual Display Digital Pressure Sensor DPC-L100 SERIES SERIES General terms and conditions... F-17 Sensor selection guide... P.661~ Related Information Glossary of terms... P.1373~ General
More informationEven a specular background does not affect the sensing performance if the sensor is located 30mm away from it (when directly opposite).
SERIES Convergent Reflective Micro Photoelectric Convergent Reflection Sensing Ensures Stable Detection Marked Conforming to EMC Directive Stable Detection by Convergent Reflective Mode Stable detection
More informationLow Price Rectangular-shaped Inductive Proximity Sensor. The GL-N12 series is recommended to large volume users for cost reduction.
SERIES ow Price Rectangular-shaped Inductive Proximity PNP output Different freq. type available type available mplifier Built-in Wide variety with total cost reduction! G-10/GH GX GX-N GX-U/FU G-18H/18H
More informationHigh-speed sampling and high resolution. The new choice for even more variegated data collection and processing.
1023 PHOTO PHOTO High Speed High Accuracy Eddy Current Type Digital Sensor SERIES Related Information General terms and conditions... F- Glossary of terms... P.1397 Sensor selection guide... P.967~ General
More informationDIGITAL LASER SENSOR. User friendly, high precision Digital Laser Sensor SERIES mm in. Easy 1 Installation.
LS SERIES DIGITAL LASER SENSOR Multi-voltage User friendly, high precision Digital Laser Sensor Conforming to EMC Directive Conforming to FDA regulations Easy Installation We designed types of sensor heads
More informationConnect Fiber Sensors and Displacement. Real-time communication for various sensors. Digital laser sensor LS-500 SERIES
Unit for / CC-Link SC-GU3-04 / SC-HG1-CEF SC-GU3-01 / SC-HG1-C Connect Fiber Sensors and Displacement Sensors to for High-Speed Control Introducing the industry's first * communication units compatible
More informationThe dual display means that the current value and the threshold value, it makes direct setting of threshold value
735 Dual Display Digital Pressure Sensor DPC-L100 SERIES SERIES General terms and conditions... F-3 guide... P.699~ Related Information Glossary of terms... P.1563~ General precautions... P.1566 For Liquid
More informationHigh-speed sampling and high resolution. The new choice for even more variegated data collection and processing.
1023 FIBER PHOTO MICRO PHOTO AREA LIGHT CURTAINS PRESSURE / FLOW INDUCTIVE PROXIMITY PARTICULAR USE SENSOR SIMPLE UNITS MEASUREMENT STATIC CONTROL DEVICES ENDOSCOPE MARKERS PLC / TERMINALS HUMAN INTERFACES
More informationThe World s in Compactness. * Among photoelectric sensors with built-in amplifier, as of June 2015 (survey by our company)
Amplifier Built-in Ultra-minute Photoelectric Sensor EX-Z SERIES Conforming to EMC Directive Recognition No. 1 The World s in Compactness * Among photoelectric sensors with built-in amplifier, as of June
More informationHigh-speed sampling and high resolution. The new choice for even more variegated data collection and processing.
1105 High Speed High Accuracy Eddy Current Type Digital Sensor SERIES Related Information General terms and conditions... F-7 Glossary of terms... P.1493 Sensor selection guide... P.1055~ General precautions...
More informationNA1-PK5 SERIES NA1-5 SERIES
Picking Switch Picking Sensor SL-VPK01/ VPK02 NA1/NA2 SERIES Picking Switch SL-VPK01 Picking Switch for Shutter SL-VPK02 The Picking Sensor Essential for Configuring a High-reliability Picking System General
More informationCylindrical Compact Inductive Proximity Sensor Amplifier Built-in. panasonic.net/id/pidsx/global
8 PHOTO PHOTO MEASURE Cylindrical Compact Inductive Proximity SERIES Related Information General terms and conditions... F- Glossary of terms... P.576~ panasonic.net/id/pidsx/global guide... P.78~ General
More informationColor Mark Photoelectric Sensor E3S-VS
Sensing Supply voltage Output 12 to 80 ma, with 1.5 to 4 ma constant current source; 1.2 cm, 5 cm 100 ma, Color Mark Photoelectric Sensor Small Color Mark Sensor With Built-In DC Amplifier Fast, 1 ms maximum
More informationpanasonic.net/id/pidsx/global
73 PHOTO PHOTO Digital Pressure Sensor For Gas SERIES Related Information General terms and conditions... F-3 Glossary of terms... P.1563~ guide... P.699~ General precautions... P.1566 MEASURE Simple &
More informationNo. 1. The World s in Compactness. Amplifier Built-in Ultra-minute Photoelectric Sensor EX-Z SERIES panasonic.net/id/pidsx/global
Ultra-minute Photoelectric Sensor EX-Z SERIES Conforming to EMC Directive No. 1 The World s in Compactness * Among photoelectric sensors with built-in amplifier, as of June 215 (survey by our company)
More informationAmplifi er-separated. A line width of approx. 240 mm in (typical) at a 1,000 mm in sensing distance
Digital Laser Sensor SERIES Related Information Amplifi er-separated General terms and conditions... P. Sensor selection guide...p.~ / P.~ Glossary of terms / General precautions... P.98 ~ / P.986 ~ About
More informationHigh Accuracy Eddy Current Type Displacement Sensor. Linearity 0.5 % F.S.
MEASUREMENT SENSORS SERIES High Accuracy Eddy Current Type Displacement Sensor GP-X LD LA LA-300 HL-T1 LM10 LH-0 HL-C1 Accurate measurement of minute displacements Minute displacement of metallic objects
More informationU-shaped Type/Convergent Reflective Type. onlinecomponents.com
PHOTOELECTRIC SENSOR SERIES U-shaped Type/Convergent Reflective Type SS-A SU-7/SH VF NX MS-AJ RT- PX- EX CY Amplifier-separated Type Multi-voltage Type Amplifier Built-in Type Mounting Stand Stable Detection
More informationFerrous metal (The sensing distance decreases with non-ferrous metal.) Power supply voltage (operating voltage range)
Description The sensors provide excellent results even with difficult-to-detect objects, e.g. small or thin parts, wires or bright metals. A variety of types cover a wide range of individual requirements
More informationLH-50. High-precision measurement using safe LED beam LED TYPE OPTICAL DISPLACEMENT SENSOR. LH01caE0(00/6/28) 01.2.
LH01caE0(00/6/28) 01.2.14 9:19 PM Page H1 LED TYPE OPTICAL DISPLACEMENT SENSOR High-precision measurement using safe LED beam Conforming to EMC Directive LH01caE0(00/6/28) 01.2.14 9:19 PM Page 1 Minute
More informationThread length (overall length) material
Cylindrical Proximity Sensor for Mobile Usage Designed and tested to keep your machines moving IP69k tested and certified for highest water resistance e1 type approval (according to automotive directive
More informationSF-C10 SERIES. Exclusive Control Unit for Light Curtain. Plug-in type control unit. Robust type control unit SF-C12 Slim type control unit SF-C13
Exclusive Unit for Curtain SERIES PHOTO PHOTO MEASURE Conforming to Machine, Low Voltage (SF-C/C only) & EMC Directive Certified Listing Less setup time for safety circuits Plug-in type control unit SF-C
More informationA line width of approx. 240 mm in (typical) at a 1,000 mm in sensing distance
6 FIBER PHOTO MICRO PHOTO AREA LIGHT CURTAINS PRESSURE / FLOW INDUCTIVE PROXIMITY PARTICULAR USE SENSOR SIMPLE UNITS MEASUREMENT STATIC CONTROL DEVICES ENDOSCOPE MARKERS PLC / TERMINALS HUMAN INTERFACES
More informationHigh-speed sampling and high resolution. The new choice for even more variegated data collection and processing.
1105 PHOTO PHOTO High Speed High Accuracy Eddy Current Type Digital Sensor SERIES Related Information General terms and conditions... F-7 Glossary of terms... P.1493 Sensor selection guide... P.1055~ General
More informationGP-X SERIES Conforming to EMC Directive
High Speed High Accuracy Eddy Current Type Digital Displacement Sensor GP-X SERIES Conforming to EMC Directive 25!s &.2%F.S. High-speed sampling and high resolution. The new choice for even more variegated
More informationDC 3-wire Cylindrical Inductive Proximity Sensor. Long sensing range
INDUCTIVE SERIES DC 3-wire Cylindrical Inductive Proximity Oil resistant Metal embedding possible Amplifier Built-in GX G-6 High performance and environmental resistance at low price GA-/GH GX GX-U/FU
More informationE2K-F. Flat Capacitive Sensor with a Thickness of Only 10 mm. Flat Proximity Sensor. Ordering Information. Sensors [Refer to Dimensions on page 4.
Flat Proximity Sensor EK-F CSM_EK-F_DS_E Flat Capacitive Sensor with a Thickness of Only mm Flat Sensor with excellent space efficiency. (Model with built-in Amplifier is only mm thick.) Direct mounting
More informationOnline data sheet VTE18-4P4240 V18 CYLINDRICAL PHOTOELECTRIC SENSORS
Online data sheet VTE8-P0 V8 VTE8-P0 V8 A B C D E F Illustration may differ Ordering information Type Part no. VTE8-P0 606 Other models and accessories www.sick.com/v8 H I J K L M N O P Q R S T Detailed
More informationE3S-A. Built-in Amplifier Photoelectric Sensor (Medium Size) Ordering Information. Built-in Amplifier Photoelectric Sensors. Horizontal. 7 m.
Built-in Amplifier (Medium Size) ES-A CSM_ES-A_DS_E Be sure to read Safety Precautions on page 0. Ordering Information Built-in Amplifier s Red light Infrared light Sensing method Appearance Connection
More information1 open / 1 close, 240 V ac / 2 A. < 70 ma < 65 ma ac 20 Hz 13 Hz dc 72 Hz 25 Hz
Description Operation mode and max sensing range: Diffuse proximity: 0-5 m Background suppression: 0- m Compact rectangular housing (x mm) Cable or rotatable plug connection via potentiometer Switch selectable
More informationPRCMT18-5DO PRCMT18-5DC PRCMT18-5DO-I PRCMT18-5DC-I
PRCM Series Cylindrical Connector Type Proximity Sensor Features Improved the noise immunity with dedicated IC Built-in reverse polarity protection circuit (DC -wire type) Built-in surge protection circuit
More informationSERIES Amplifier Built-in Miniature-size Photoelectric Sensor
PHOTOEECTRIC SENSORS SERIES Amplifier Built-in Miniature-size Photoelectric EQ- Amplifier Built-in Micro-size Type RX -4 EQ- Marked Conforming to EMC Directive (Excluding -DS/DM) RX-S Remarkable Sensing
More informationGL SERIES. Compact & Low Price Inductive Proximity Sensor. Wide variety, high performance in surprisingly small body at low cost.
811 Compact & ow Price Inductive Proximity Sensor SERIES Related Information General terms and conditions... F-3 Glossary of terms...p.176~ guide... P.781~ General precautions... P.179~ PHOTO PHOTO MEASURE
More information4. Sensing Distance. 2: 2 mm. 4: 4 mm 8: 8 mm 15: 15 mm 16: 16 mm 20: 20 mm
Inductive Sensor Double Sensing Distance Model Number Legend SALIENT FEATURES IP - 7, Brass Housing Short - Circuit protection Reverse Polarity Protection Shielded and Non - Shielded Prewired and Connector
More informationThread length. 27 (40) mm. 27 (44) mm. 27 (40) mm. 34 (50) mm. 34 (49) mm. 39 (60) mm. 39 (54) mm. 44 (65) mm. 44 (59) mm
Long Distance Cylindrical. Extra long for increased protection and sensing performance triple proximity sensors for flush mounting requirements. designed and tested for extra long life. Ordering Information
More informationGX-5SU(B) is just 5.4 mm 0.213in in diameter, the smallest in existing DC two-wire sensors. It saves you space.
DC 2-wire Cylindrical Inductive Proximity SERIES Amplifier Built-in High performance & ease of use Robust in tightening The tightening torque has been improved to approx. four times greater than that of
More informationUser safety and equipment protection guidelines
Snap-in I/O Module The V200-18-E1 plugs directly into the back of compatible Unitronics OPLCs, creating a selfcontained PLC unit with a local I/O configuration. The module offers: 3 analog inputs 16 digital
More informationMPS-32. Pressure Sensors MPS-32 2-Color Panel Mount. Features. Green Display. MPS-32 Programming Options
Features MPS- Green Display MPS-VN-PC ure Sensors Features ure Ranges: Vacuum ure 0 to -0 inhg Positive ure 0 to 5 PSI Sensor : NPN or PNP Open Collector Transistor, 0VDC, 5mA Optional Analog, to 0mA Optional
More informationE2A. Ordering Information. Cylindrical Proximity Sensor. Safe Mounting with Greater Sensing Distance. E2A Cylindrical Proximity Sensor 1
Cylindrical Proximity Sensor E2A Safe Mounting with Greater Sensing Distance Ensures a sensing distance approximately 1. to 2 times larger than that of any conventional OMRON Sensor. Problems such as the
More informationInductive Proximity Sensor
Inductive Proximity Sensor Subminiature Sensor with Cable Amplifier Offers Greater Mounting Flexibility Programmable Controller-compatible Subminiature, shielded sensing head (3 or 8 dia.) allows the Sensor
More informationFrom ultra-thin lead frames to iron sheets... Double feed detection of various metal sheets
1147 Detector SERIES Related Information General terms and conditions... F-7 General precautions...p.151 PHOTO PHOTO MEASURE ITY From ultra-thin lead frames to iron sheets... Double feed detection of various
More informationInductive Proximity Sensor
Inductive Proximity Sensor Miniature, Slim-styled Proximity Sensor Space-saving Sensor ideal for timing cam and dog detection. Four mounting holes provided: two each mounting from side or rear of the housing.
More informationFrom ultra-thin lead frames to iron sheets... Double feed detection of various metal sheets
1135 Detector SERIES Related Information General terms and conditions... F-3 General precautions...p.1595 PHOTO PHOTO MEASURE From ultra-thin lead frames to iron sheets... Double feed detection of various
More informationPRD/PRDW Series. Long Distance Type
Long Distance Type Long distance proximity Features Long sensing distance (. to times longer sensing distance guaranteed compared to existing models) Improved the noise resistance with dedicated IC Built-in
More informationSeries LC6D/LC6C. LJ1 LG1 LC1 LX LC6D/LC6C Switches LC6C LC6D. Series LX Dedicated Stepper Motor Driver and Positioning Driver
Series LCD To power supply Stepper Motor Driver LCD Electric Actuator Series LCC Series LX Dedicated Stepper Motor Driver and Positioning Driver Series LCD/LCC PLC Positioning unit (Not incl. To be provided
More informationOperating instructions. Switching amplifier DN0210 DN / / 2015
Operating instructions Switching amplifier DN0210 DN0220 UK 80011079 / 00 01 / 2015 Contents 1 Preliminary note...4 1.1 Symbols used...4 1.2 Warning signs used...4 2 Safety instructions...5 2.1 General...5
More informationTemperature Switches
ETS 00 Series Temperature Switch for Inline and Tank Mounting Applications Description The ETS 00 is a compact electronic temperature switch with 4-digit digital display. Pressure resistant to 8700 psi,
More informationModel Number Structure
Solid State Relays with Failure Detection Function G3PC CSM_G3PC_DS_E_1_1 Refer to Safety Precautions for All Solid State Relays. Detects failures in SSR used for heater temperature control and simultaneously
More informationHigh-speed sampling and high resolution. The new choice for even more variegated data collection and processing.
867 PHOTO PHOTO High Speed High Accuracy Eddy Current Type Digital Sensor SERIES Related Information General terms and conditions... P.1 Glossary of terms... P.1019 Sensor selection guide... P.11~ / P.833~
More informationThe GL-N12 series is recommended to large volume users for cost reduction. Exclusive mounting bracket. Cost saving. Conventional model.
INDUCTIVE SERIES ow Price Square-shaped Inductive Proximity Wide Variety with Total Cost Reduction! G-6 G-18H/18H Marked Conforming to EMC Directive G-8U Exclusive Mounting Bracket is Needless The series
More informationpanasonic.net/id/pidsx/global CCD The sensor can be used for various applications with its binary data output with four different sensing modes.
1123 PHOTO PHOTO PARTICUR Type Edge Sensor SERIES Related Information General terms and conditions... F-3 About laser beam... P.1593~ guide... P.1021~ General precautions... P.1595 Conforming to FDA regulations
More informationProduct description. At a glance. performance in a metal housing coating available Precise autocollimation optics. sensors
-2 Laser Small photoelectric sensors High-performance photoelectric sensor family with laser optics Product description At a glance performance in a metal housing coating available Precise autocollimation
More informationIO-DI8-TO8 I/O Expansion Module 8 Inputs, 8 Outputs
IO-DI8-TO8 I/O Expansion Module 8 Inputs, 8 Outputs The IO-DI8-TO8 is an I/O expansion module that can be used in conjunction with specific Unitronics OPLC controllers. The module offers 8 digital inputs,
More informationOil-resistive, Long-range Photoelectric Sensor with Metal Housing
Oil-resistive, Long-range with Metal Housing ES-C Water- and Oil-resistive with Metal Housing Used for Long-range Sensing Satisfies the water- and oil-resistive requirements and safe enough for use in
More informationE2K-F. Flat Capacitive Sensor with a Thickness of Only 10 mm. Flat Proximity Sensor. Ordering Information. Sensors [Refer to Dimensions on page 4.
Flat Proximity Sensor EK-F CSM_EK-F_DS_E Flat Capacitive Sensor with a Thickness of Only mm Flat Sensor with excellent space efficiency. (Model with built-in Amplifier is only mm thick.) Direct mounting
More informationIndustrial Control Relays Relays and terminal module RS type
Relaysandterminal module Relays-and-terminal module RS, N A very compact, space-saving terminal module containing four or six relays with one NO contact. Features The RS series relays-and-terminal module
More information-ment Ambient humidity 35 to 95%RH, Storage :35 to 95%RH
PRD/PRDW Series Long Distance type Long distance proximity Features Long sensing distance (. to times longer sensing distance guaranteed compared to existing models) Improved the noise resistance with
More informationNPN output PNP output Cord connection Cord length: 2 m Through-beam 7 m Light-ON. 2 m. (selectable by wiring) Diffuse reflective 0.
Built-in Amplifier Photoelectric Sensor E3V3 Easy-to-use, Low-cost Photoelectric Sensor Incorporating s that can be clearly seen from a distance. A series of models with an M8 metal junction connector
More informationMeasuring transducers MI4x0 series Programmable transducers for RTD sensors MI450
Measuring transducers MI4x0 series Programmable transducers for RTD sensors MI450 o Measuring of resistance of RTD sensors (Pt100, Pt1000, Ni100, Cu10,...) o Accuracy class up to: 0.5 o Programmable input
More informationSmartSlice I/O Plug-and-Play I/O. System Configuration
CN CN A/B CN CN A/B RT-ML SW SW RT-ML SW SW RT-@ SmartSlice I/O Plug-and-Play I/O Remote I/O with digital and analogue I/O units, relay outputs and configurable temperature inputs. All SmartSlice units
More informationIO-DI8-TO8, IO-DI8-TO8-L I/O Expansion Modules 8 Inputs, 8 Outputs
IO-DI8-TO8, IO-DI8-TO8-L I/O Expansion Modules 8 Inputs, 8 Outputs The IO-DI8-TO8 and IO-DI8-TO8-L are I/O expansion modules that can be used in conjunction with specific Unitronics OPLC controllers. The
More informationModel NPN output PNP output Standard. configuration
Slot-type Photomicrosensor (Non-modulated) *1 EE-SX4/6 CSM_EE-SX4_6_DS_E 1 Global Standard Slot-type photomicrosensors with 0- to 100-mA direct switching capacity. Series includes models that enable switching
More informationV E1B Snap-in I/O Module
V200-18-E1B Snap-in I/O Module The V200-18-E1B plugs directly into the back of compatible Unitronics OPLCs, creating a selfcontained PLC unit with a local I/O configuration. Features 16 isolated digital
More informationPhotoelectric Sensors E3F2
Photoelectric Sensors E3F2 Threaded Cylindrical Photoelectric Sensors with Built-in Amplifier for Use as an Optical Proximity Switch M18 DIN-sized cylindrical housing Housing materials: plastic, nickel
More informationHead-separated Digital Pressure Sensor For Gas DP5 SERIES DPH SERIES. High speed response of 1/1,000 sec. High speed response 1 ms
72 Digital Sensor For Gas DP5 SERIES SERIES General terms and conditions... F-17 Related Information Glossary of terms... P.17~ Sensor selection guide... P.661~ General precautions... P.145 PHOTO PHOTO
More informationSensing method Appearance Connection method Sensing distance Part number NPN output PNP output Through-beam Prewired (2 m) E3Z-T61A E3Z-T81A 10 m
Through-Beam Sensor with Visible Red LED Visible Beam Allows Visual Confirmation of the Detection Spot, for Easy Installation and Maintenance Built-in amplifier Mutual interference protection filter included
More informationIO-DI8-RO4, IO-DI8-RO4-L I/O Expansion Modules 8 Inputs, 4 Outputs
IO-DI8-RO4, IO-DI8-RO4-L I/O Expansion Modules 8 Inputs, 4 Outputs The IO-DI8-RO4 and IO-DI8-RO4-L are I/O expansion modules that can be used in conjunction with specific Unitronics OPLC controllers. The
More informationPressure Switch CE40. Digital settings available via IR data communication without actually applying pressure to the unit
Pressure Switch CE0 NEW IR Communication type Pressure Switch Rev. Fluids/Gasses Utilizing Stainless Diaphragm Utilizes stainless steel diaphragm for use with a wide variety of pressure media Excellent
More informationModel Number Structure
Solid State Relays with Failure Detection Function G3PC Detects failures in SSR used for heater temperature control and simultaneously outputs alarm signal. This SSR supports the safe design of heater
More information