FOUNDATION Fieldbus Fieldbus Basics

Size: px

Start display at page:

Download "FOUNDATION Fieldbus Fieldbus Basics"

Bartholomew McLaughlin
6 years ago
Views:

1 FOUNDATION Fieldbus Fieldbus Basics Nik Suzaimi Berkat Honeywell Sdn Bhd, MALAYSIA On behalf of Fieldbus Foundation TM End User Seminar 25 Oct 2010 Kuala Lumpur, MALAYSIA

2 Agenda H1 Basic Review. What is Fieldbus? Integrated Architecture. H1 Benefits. More data is available. Expanded view of Process and Instruments. Reduction in System Hardware. Wiring Saving. Summary. 4-20mA versus Fieldbus. FOUNDATION Fieldbus Technology. H1 network review technology. Intrinsic Safety. DD and CFF Files. Typical Fieldbus installation. Fieldbus Components. H1 Fieldbus Model User Application Resource, Transducer and Function Blocks. Standard Function Blocks. Example of a Control Loop. H1 Link Master Redundancy. H1 Link Active Scheduler. H1 Link Schedule Optimization High Speed Ethernet 2

3 H1 Basic Review 3

4 What is Fieldbus? 1. A fieldbus is an all-digital, serial two-way, multi-drop communication System. 2. H1 link (31.25kbps) interconnects field equipment (Sensors, Actuators & I/O). 3. HSE (High Speed Ethernet, 100mbps) provides integration of high speed controllers, subsystems (via Linking Device) and data servers and workstation. Data Servers 4

5 Integrated Architecture 1. Management Information Systems (MIS), Enterprise Resource Planning (ERP), and Human Machine Interface (HMI) access the H1 Fieldbus information via the Data Servers. Data Servers MIS ERP HMI Data Servers HSE/FTE H1-Fieldbus Network Business Enterprise and Plant Application Packages H1 and HSE Factory/Plant Instrumentation and Control devices 5

6 H1 Benefits 6

7 More Data for Better Decision Making 1. Fieldbus allows multiple variables from each device to be brought into the control system for archiving, trend analysis, process optimization, reporting, predictive maintenance and for asset management. 2. Fieldbus distortion-free characteristics digital communication enables improved control capability which can improve product yields. Control System Network HSE Analog Controller Fieldbus Controller 4-20mA PV I/O Subsystem PV, Mode, Variables, Alarm Diagnostics, Etc H1 Traditional 4-20mA One Variable (One Direction) Fieldbus Multiple Variables (Both Directions) 7

8 Expanded View of Process & Instrument 1. Self Diagnostics and communication capabilities of microprocessor based fieldbus devices helps reduce downtime and improve plant safety. 2. Plant operation and Maintenance personnel can be notified and corrective actions taken quickly and safely. Control System Network HSE Analog Controller Fieldbus Controller 4-20mA PV I/O Subsystem PV, Mode, Variables, Alarm Diagnostics, Etc H1 Traditional 4-20mA View stops at I/O Subsystem Fieldbus Extends View to Field Instrument 8

9 Reduction in System Hardware 1. Standard Function Blocks is used to implement the Control Strategy. 2. Many control system functions such as AI, PID and AO can be performed by the field device through the use of these Standard Function Blocks. 3. Distribution of control into field devices can reduced the amount of hardware and cabinet footprint needed. Control System Network HSE PID Analog Controller Fieldbus Controller 4-20mA PV I/O Subsystem AI AO PV, Mode, Variables, Alarm Diagnostics, Etc H1 AI AO PID Traditional Control and I/O requires extra hardware Fieldbus Extends Control and I/O to Field Instrument 9

Sample Implementation 192 segments per cabinet Assuming using 8-segment redundant H1 card Certified for installation in Class 1 Division 2 / Zone 2 hazardous locations Translates

10 Sample Implementation 192 segments per cabinet Assuming using 8-segment redundant H1 card Certified for installation in Class 1 Division 2 / Zone 2 hazardous locations Translates to 3,072 FF devices per System Cabinet It could be more when each FF device may provide up to 16 process values ( ie. Temperature Multiplexers) 3,072 FF devices per System Cabinet 10

11 Wiring Savings 1. The H1 fieldbus allows many devices to be connected to a single wire pair. 2. This results in less wire, fewer intrinsic safety barriers and fewer marshaling cabinets. Control System Network HSE Analog Controller Fieldbus Controller 4-20mA PV I/O Subsystem I.S PV, Mode, Variables, Alarm Diagnostics, Etc H1 I.S I.S I.S I.S I.S Traditional 4-20mA wiring, One I.S Barrier, One wiring for each Device One I.S Barrier, One Wire for Many Devices 11

12 Summary Control in-the-field Reduced loading on DCS Controllers Reduced number of intrinsic safety barriers Only H1 card in the Marshalling Reduced number of Input/Output Converters Reduced number of Power Supplies and Cabinets. Reduced size of equipment Rooms. Remote configuration of devices. Increased accuracy of measurements Easier evolution due to standardized function blocks Increased sophistication and flexibility of instrumentation Increased uptime due to less equipment, better self diagnostics and remote diagnostics More information available for Operations. Significant Contribution to Weight Reduction on your Offshore 12 Platforms

13 4-20mA versus Fieldbus 1. A H1 fieldbus retains and optimizes the desired features of the 4-20mA analog system: - single Loop integrity. - a standardized physical interface to the wire. - a bus-powered devices on a single wire pair. - intrinsic safety options. P.S. 4-20mA 4-20mA 2. In addition, FOUNDATION Fieldbus enables: x faster communication speed compared to HART - increased capabilities (due to full digital communication). - reduced wiring and terminations (multiple device on one wire). - increased selection of suppliers (due to interoperability) - reduced control room loading (control on wire) - connection to HSE backbone. P.S. Fieldbus

14 FOUNDATION fieldbus Technology 14

15 H1 Network Review 1. Multi-Drop wire pair with Power and Signal on same cable. 2. Support Intrinsic Safety. 3. Fault Tolerant, can have multiple Link Masters. 4. Function Blocks built into Field Devices. 5. Control on the Wire single loop integrity 6. Distance up to 1900 meters Fieldbus Signal HSE (FTE) 7. Add Repeaters to extend > 1900 meters 8. Max. of 4 repeaters can be used to a maximum distance of 9500 meters 1900 meters H1Digital Signal R H1 Digital Signal Distance > 1900 meters 15

16 Intrinsic Safety Control room Field I.S certified devices Field device Trunk Power supply Conditioner T T Host Control System I.S Interface Wiring block I.S certified devices 16

Option to include specific manufacturer parameters. 4. Parameters and Capabilities are defined in device files DD and CFF. 5.

17 DD and CFF Files 1. Field Devices will consists of: Actual Physical Device. Device Description (DD). Common File Format (CFF). 2. DDs and CFFs will be provided by the Device Supplier or Host Supplier. 3. Standard parameters present in devices. Option to include specific manufacturer parameters. 4. Parameters and Capabilities are defined in device files DD and CFF. 5. Device files are key to off-line configuration. Configuration System Instruments described with Device Description Language DD & CFF H1 Network 17

18 DD and CFF Files 1. Device Descriptor (DD) File allow operation of devices from different suppliers on the same fieldbus with single host system. 2. Common File Format (CFF) is a file which describes the functions and capabilities of a field device. The CFF file is used in conjunction with the Device Descriptor file to enable a host system to configure the system off-line. 3. CFF files are standard ASCII text file. 18

19 Typical Fieldbus Installation An example of the Chicken foot (tree) topology. DOFC Control System (Host) Fieldbus Interface Module Redundant, isolated power conditioning defined by FF-831, Fieldbus PST Specs. Typically buspowered fieldbus devices per segment. 120 m distance from FF JB to FF Device Trunk T T PC PC Spur Power supply Power supply 24V DC Bulk power FF-831 Spur short-circuit protection. Up to 1900 meters. Field Devices Maximum of 9500 meters via repeaters. Segment 19

Fieldbus Component FOUNDATION Fieldbus System Power Supply Workstation Fieldbus Interface Module HMI Conditioner Fieldbus Controller HSE (FTE) Cable

20 Fieldbus Component FOUNDATION Fieldbus System Power Supply Workstation Fieldbus Interface Module HMI Conditioner Fieldbus Controller HSE (FTE) Cable Safe Area (Host) Terminator Junction Box H1 Bus (Trunk) Hazardous Area (Field) Terminator H1 Bus Wire (Spurs) 20 Transmitters Actuator Valve Analyzer

21 H1 Fieldbus Model FOUNDATION fieldbus H1 technology consists of: The Physical Layer. The Communication Stack. The User Application Layer. The Open Systems Interconnect (OSI) layered communication model is used to model these components. Physical Layer is OSI layer 1. Data Link Layer is OSI layer 2. FMS is OSI layer 7. Communication stack is comprised of layer 2 and layer 7. Fieldbus does not use OSI layer 3, 4, 5 and 6. FAS maps the FMS into DLL. 21

22 User Application - Blocks 1. The Fieldbus Foundation has defined a standard User Application Layer based on Blocks. 2. Blocks are representations of different types of application functions. 3. The types of blocks used in a User Application are described as: Resource Block, Transducer Block, Function Blocks. 4. Devices are configured using Resource Block and Transducer Block. 5. The Control Strategy is built using Function Blocks. 22

23 Resource Block 1. The Resource Block describes characteristics of the fieldbus device such as device name, manufacturer and serial number, etc. 2. There is only one Resource Block in a device. FIM H1 link interfaces Transducer block Device Resource block Device 23 Control Builder Project tab

24 Transducer Block 1. Transducer Blocks are used to configure devices. 2. Transducer Blocks are required to Read sensors value and command output value. FIM H1 link interfaces Transducer block Device Resource block Device 24 Control Builder Project tab

25 Function Blocks 1. The Control System Strategy is built using Function Blocks. Input and output parameters of Function Blocks can be linked over the fieldbus. 2. The execution of each Function Blocks is precisely scheduled and there can be many function blocks in a single user application. AI Block PID Block AO Block 25

26 Standard Function Blocks Examples Function Blocks Analog Input Analog Output Bias/Gain Control Selector Discrete Input Discrete Output Manual Loader Proportional/Derivative Proportional/Integral /Derivative Ratio Function Blocks Device Control Output Splitter Signal Characterizer Lead Lag Deadtime Integrator (Totalizer) Setpoint Ramp Generator Input Selector Arithmetic Timer Analog Alarm Function Blocks Multiple Analog Input Multiple Analog Output Multiple Discrete Input Multiple Discrete Output 26

27 Example of a Control Loop 1. Control Strategy can be built using Function Blocks built into field devices. 2. A simple temperature transmitter may contain an AI function block. A Control Valve might contain a PID function block as well as the expected AO Block. 3. Thus, a complete control loop can be built using a simple transmitter and a control valve. Control in the Field does need a Controller. AI Block PID Block HSE (FTE) Fieldbus Controller AO Block H1 Fieldbus AI PID AO 27 Example of a complete control loop using Function Blocks located in fieldbus Devices. Example of a complete control module strategy Control on the Wire. Offload your DCS Controller loading by control on-the-wire

28 Foundation Fieldbus Control Integration DCS DCS Controller Control AI PID BKCAL_OUT AO on-thewire? 28

29 The one we know : Control on the DCS All CONTROL Function Blocks executed in the DCS DCS DCS provide primary PID Control PID Control Fieldbus Device is purely supplying Input (AI) and output (AO) Connection AI BKCAL_OUT AO 29

30 FF Way : Control on the Wire All Function Blocks executed in the device.. Primary PID Control executed by the FF Device itself DCS simply the MMI to change control loop Mode, Setpoint, etc PID Execution sitting on the device itself DCS Controller is not required at all, for some vendor implementation AI PID BKCAL_OUT DCS Control AO 30

31 H1 Link Master Redundancy 1. Two types of devices are defined in the Data Link Layer (DLL). Link Master and Basic Device. 2. Link Master Device are capable of becoming Link Active Scheduler (LAS). Basic Device do not have this capability. PRIM LAS BASIC Device BKUP LAS 31

32 H1 Link Active Scheduler 1. LAS provides scheduled communication(*) control on the H1 network. 2. LAS provides unscheduled communication(**) control on the H1 network. 3. LAS maintain a live list (devices that response to the pass token) it uses to recognize devices on each H1 Link. 4. Provides Data Link Time Synchronization so that all devices have exactly the same data link time. 5. Insures LAS Backup or LAS Redundancy. If one LAS fails, one of the Link Master will become the LAS and operation continues. (*) Sends a compel data (CD) message to a device which allows the device to publish specific data when it receives the CD message. (**) Issues a pass token to a device which allows the device to send message until it has finished or the token hold time expires. 32

33 H1 Link Active Scheduler 1. PID Loop scheduled and unscheduled communication. Function blocks: AI 110 PID 110 AO 110 loop 110 period of execution Scheduled Closed loop control Function Block Execution Scheduled Communication Unscheduled Communication Unscheduled Alarms/Events Maintenance/Diagnostic Information Program Invocation Permissives/Interlocks Display Information Trend Information Configuration 33

34 Link Schedule Optimization 1. Makes effective use of Fieldbus bandwidth. 2. Important for Control on the Wire. 3. Allow for better time management on the Link. 4. Link Schedule Optimization provides a quantum improvement in the efficiency of Fieldbus Link bandwidth use. 34

35 Link Schedule Optimization (before) Unoptimized Schedule 5 control loops 1065 msec (note too big for 1 sec macrocycle) 35

36 Link Schedule Optimization (after) Optimized Schedule 5 control loops -- <365 msec (now fits with room to spare!) 36

37 HIGH SPEED ETHERNET (HSE) 37

38 FF Integrated Architecture HSE Subsystem Integration High Performance Control Backbone Standard Ethernet Equipment and Wiring Standard Function Blocks PLUS Flexible Function Blocks for Discrete/Batch/PLC Redundant HSE Interfaces and Devices Linking Devices (LD) Integrate H1 HSE Provides the Open Interface for Data Servers MIS APPLICATION PACKAGES Data Servers HSE High Speed Control and Integration Backbone LD LD P P P P L L L L 38

39 High Speed Ethernet Devices HSE Client Gateway 100 Mbit/s Switch I/O Network HSE Field Device Linking Device P H1 P H1 P H1 L L L Plant Plant Plant 39

40 HSE - LAN Redundancy HSE Client Gateway I/O Network HSE Field Device Linking Device P H1 P H1 P H1 L L L Plant Plant Plant 40

41 HSE - Device Redundancy HSE Client Gateway I/O Network HSE Field Device Linking Device P H1 P H1 P H1 L L L Plant Plant Plant 41

42 Thank you 42

FOUNDATION Fieldbus Fieldbus Basics & its Benefits

FOUNDATION Fieldbus Fieldbus Basics & its Benefits James Loh Yokogawa Engineering Asia On behalf of Fieldbus Foundation TM Vietnam FF Seminar Fieldbus Basics - Agenda 1. H1 Basic Review. 2. H1 Benefits.