RT-1 PC RELAY TERMINAL RT-1 PC TERMINAL

Size: px
Start display at page:

Download "RT-1 PC RELAY TERMINAL RT-1 PC TERMINAL"

Transcription

1 RT- Wide variation relay RT- PC RELAY TERMINAL RT- PC TERMINAL RT- PC Relay (PQ relays mounted) RT- PC points points points points FEATURES. Easy connecting and simplified wiring Connection to the various programmable controllers is performed with the onetouch connector. Wiring efficiency is improved and wiring within panels is greatly simplified.. Space saving By integrating the interface relay and, a -point type is still compact. (W)0 (D) (H). mm (W).0 (D). (H). inch. Helps reduce the size of control panels.. Wide range of I/O points for easy expansion Complete lineup includes,, and - point input types and,,, and -point output types. A single cable allows for expansion up to a maximum of points.. High sensitive and reliable PQ relays are mounted The RT- PC relay is a RT- PC ( block) that is equipped with a highly reliable,. mm. inch height, slim PQ relay for use as an interface relay. Also, single-action removal and installation of the relay are performed with the provided lever. This greatly simplifies relay maintenance and replacement of the SSR. ORDERING INFORMATION or I: O: Voltage type A: AC (RT- PC only) D: DC Nominal coil voltage V: V V: V 00V: 00/0 V 00V: 00/0 V RoHS compliant : RT- PC SQ: RT- PC relay (PQ relays mounted) Types of connector S: S type (Standard pitch) M: (Half pitch) RT No. of I/O points : points 0: points 0: points (RT- PC only) 0: points (RT- PC only) ASCTB0E 00-T

2 RT- TYPES. RT- PC relay RT- PC relay is the RT- PC equipped with a PQ relay. Normal operating Item Types of connector or output No. of I/O points Part No. voltage RT- PC relay S type input points V DC V DC RTSQ-ID-V-S RT- PC relay S type input points V DC V DC RTSQ-ID-V-S RT- PC relay S type input points V DC V DC RTSQ-ID0-V-S RT- PC relay S type input points V DC V DC RTSQ-ID0-V-S S type RT- PC relay S type output points V DC V DC RTSQ-OD-V-S RT- PC relay S type output points V DC V DC RTSQ-OD-V-S RT- PC relay S type output points V DC V DC RTSQ-OD0-V-S RT- PC relay S type output points V DC V DC RTSQ-OD0-V-S RT- PC relay input points V DC V DC RTSQ-ID0-V-M RT- PC relay input points V DC V DC RTSQ-ID0-V-M RT- PC relay output points V DC V DC RTSQ-OD-V-M RT- PC relay output points V DC V DC RTSQ-OD-V-M Standard packing: Carton: pc.; Case: 0 pcs.. RT- PC Not equipped with a relay. Install a separately-sold PQ relay or AQ-C solid state relay for interfacing. Item Types of connector or output No. of I/O points Normal operating voltage Part No. RT- PC S type input points 00V AC 00/0 V AC RT-IA-00V-S RT- PC S type input points 00V AC 00/0 V AC RT-IA-00V-S RT- PC S type input points V DC V DC RT-ID-V-S RT- PC S type input points V DC V DC RT-ID-V-S RT- PC S type input points 00V AC 00/0 V AC RT-IA0-00V-S RT- PC S type input points 00V AC 00/0 V AC RT-IA0-00V-S RT- PC S type input points V AC V DC RT-ID0-V-S RT- PC S type input points V AC V DC RT-ID0-V-S RT- PC S type input points 00V AC 00/0 V AC RT-IA0-00V-S RT- PC S type input points 00V AC 00/0 V AC RT-IA0-00V-S S type RT- PC S type input points V DC V DC RT-ID0-V-S RT- PC S type input points V DC V DC RT-ID0-V-S RT- PC S type output points V DC V DC RT-OD-V-S RT- PC S type output points V DC V DC RT-OD-V-S RT- PC S type output points V DC V DC RT-OD0-V-S RT- PC S type output points V DC V DC RT-OD0-V-S RT- PC S type output points V DC V DC RT-OD0-V-S RT- PC S type output points V DC V DC RT-OD0-V-S RT- PC S type output points V DC V DC RT-OD0-V-S RT- PC S type output points V DC V DC RT-OD0-V-S RT- PC input points 00V AC 00/0 V AC RT-IA0-00V-M RT- PC input points 00V AC 00/0 V AC RT-IA0-00V-M RT- PC input points V DC V DC RT-ID0-V-M RT- PC input points V DC V DC RT-ID0-V-M RT- PC output points V DC V DC RT-OD-V-M RT- PC output points V DC V DC RT-OD-V-M Standard packing: Carton: pc.; Case: 0pcs. Notes:. S type uses a standard pitch connector. You can use the connection connect it to our or other companies Programmable Controllers. For the connection cable, see page. The uses the half-pitch connector. You can connect it to our micro-controllers (discontinued product).. The cable works with both the RT- PC relay and the RT- PC. Please refer to page. ASCTB0E 00-T

3 RT-. Combination with Relay for interface and SSR S type Types of relay RT- PC PQ relay DS-P relay Item Part No. ( Form A) Form A Form B Form A points points points Note: For type and rating of interface relay and SSR, see page. RATING (RT- PC Relay ). Relay coil specifications (per PQ relay) Nominal coil voltage AC RT-IA-00V-S, RT-IA-00V-S Available DC RT-ID-V-S, RT-ID-V-S Available Available AC RT-IA0-00V-S, RT-IA0-00V-S Available DC RT-ID0-V-S, RT-ID0-V-S Available Available AC RT-IA0-00V-S, RT-IA0-00V-S Available DC RT-ID0-V-S, RT-ID0-V-S Available Available points DC RT-OD-V-S, RT-OD-V-S Available Available points DC RT-OD0-V-S, RT-OD0-V-S Available Available points DC RT-OD0-V-S, RT-OD0-V-S Available Available points DC RT-OD0-V-S, RT-OD0-V-S Available Available AC RT-IA0-00V-M, RT-IA0-00V-M Available points DC RT-ID0-V-M, RT-ID0-V-M Available Available points DC RT-OD-V-M, RT-OD-V-M Available Available Pick-up voltage (at 0 C F) Drop-out voltage (at 0 C F) Rated operating current [±0%] (at 0 C F) Coil resistance [±0%] (at 0 C F). Contacts (per PQ relay) Characteristics Item Specifications Nominal switching capacity (resistive load) A 0 V AC, A 0 V DC Max. switching power (resistive load),0 VA, 0 W Contact rating Max. switching voltage 0 V AC, 00 V DC (0. A) Max. switching current A Min. switching capacity (reference value) 00 µa 00 mv DC Expected life Electrical (at 0 times/min.) Min. 0 ( A 0V AC), Min. 0 ( A 0V DC) Mechanical Min. 0 (at 0 times/min.) Nominal operating power Note: The contact ratings and expected life values given are for when the relay is used separately. Depending on the number of I/O points on the RT- PC relay, use within the temperature derating characteristics (see data page). When using the SSR, see page. SSR Max. applied voltage V DC %V or less %V or more. ma 0 Ω 00 mw 0%V of rated voltage V DC of nominal voltage of nominal voltage. ma,0 Ω 00 mw (at 0 C F) ASCTB0E 00-T

4 SPECIFICATIONS RT- Item Between connector s Min. 00 MΩ (excluding power) Min. 00 MΩ (excluding power) Between unlike poles on the s Min. 00 MΩ (at 00 V DC megger) Min. 00 MΩ (at 00 V DC megger) Insulation resistance Min. 00 MΩ Between connector unlike poles (for input) (excluding power, at 0 V DC megger) Between like poles on the s (for output) Min. 00 MΩ (at 0 V DC megger) Between connector s,000 Vrms (excluding power),000 Vrms (excluding power) Breakdown Between unlike poles on the s,00 Vrms for min.,00 Vrms for min. voltage Between connector unlike poles (for input) 0 Vrms for min. Between like poles on the s (for output),000 Vrms for min. Vibration resistance (Destructive) 0 to Hz at double amplitude mm.0 inch 0 to Hz at double amplitude mm.0 inch Vibration resistance (Functional) 0 to Hz at double amplitude mm.0 inch 0 to Hz at double amplitude mm.0 inch Shock resistance (Destructive) Min. m/s (0 G) Min. m/s (0 G) Shock resistance (Functional) Min. m/s (0 G) Min. m/s (0 G) Superimposed power noise Min.,000 V* Min.,000 V* Superimposed I/O noise Min. 00 V* Min.,00 V* Ambient temperature 0 C to + C + F to + F 0 C to + C + F to + F Ambient humidity % to % R.H. (Not condensing) % to % R.H. (Not condensing) Storage temperature * According to in-house measurement. Notes:. The value of breakdown voltage and insulation resistance is initial.. Condensing occurs when the unit relay is exposed to sudden temperature change in a high temperature and high humidity atmosphere. This may cause some troubles like insulation failure of the socket or the print circuit board.. Below 0 C F, condensing water can freeze and cause socket contact failures and other problems. TERMINAL BLOCK 0 C to +0 C F to + F (Not freezing and condensing) 0 C to +0 C F to + F (Not freezing and condensing) screw fasten torque 0. N m { kgf cm} 0. N m { kgf cm} Coil surge absorber Diode ( A, 00 V) Diode ( A, 00 V) Cross connection protecting diode A, inverse breakdown voltage 0 V. A, inverse breakdown voltage 0 V Applicable electrical wire 0. to. mm.0 to.0 inch Applicable wire-pressed s (mm inch). max.. max. min... min... dia. min. Company name Round type Company name Fork type J.S.T. Mfg Co., Ltd.. YSA. max. J.S.T. Mfg Co., Ltd.... max.. min.. min. NICHIFU Co., Ltd.. L NICHIFU Co., Ltd...S Nippon Tanshi Co., Ltd. VD.... Nippon Tanshi Co., Ltd. R.. REFERENCE DATA (with PQ relays mounted on). Maximum value for switching capacity (). Life curve (). Load current vs. ambient temperature () 00,000 Contact current, A 0 Resistive AC load No. of operations, 0 00 Resistive DC load 0 V AC cos φ= 0V DC x=0msec. 0V AC cos φ= Load current, A points points points 0 00,000 Contact voltage, V 0 Switching current, A Ambient temperature, C F ASCTB0E 00-T

5 RT- DIMENSIONS (mm inch). S type input points ) RT- PC relay External dimensions 0 ±.0 ±.0. -M. screw holes. ±. ±.0 POWER 0 A B C D E F. dia..0 dia. RTSQ-ID-V-S RTSQ-ID-V-S.. ±0.. ±.0 AY00 RT-OD-V-S ) RT- PC. 0.. and schematic (for AC) (RT- PC only) RT-IA-00V-S RT-IA-00V-S RT-ID-V-S RT-ID-V-S 0 0 VCC A+ B+ C+ D+ E+ F+ GND NC A- B- C- D- E- F- Mounting hole pattern ±0.. ±.00 ±0.. ±.00 -M. screw holes or -.. dia. holes 0 0 and schematic (for DC) The figure below is of the RT- PC relay. A relay is not equipped on the RT- PC. 0 0 VCC A+ B+ C+ D+ E+ F+ GND NC A- B- C- D- E- F- General tolerance: ±0. ±.0 Note: Above number is not marked on the itself. Wiring should be done according to the mark. The dimensions given in the diagram are the same for the RT- PC relay and RT- PC. However, a relay is not equipped on the RT- PC. ASCTB0E 00-T

6 . S type input points ) RT- PC relay External dimensions RT- 0 ±. ±.0.. -M. screw holes RTSQ-ID-V-S RTSQ-ID-V-S ±. ±.0 POWER 0 EXPANDER CONNECTOR. dia..0 dia. CN ) RT- PC. Mounting hole pattern. ±0.. ±.0 ±0.. ±.00 RT-IA0-00V-S RT-IA0-00V-S RT-ID0-V-S RT-ID0-V-S. 0.. ±0.. ±.00 -M. screw holes or -.. dia. holes 0 0 and schematic (for AC) (RT- PC only) 0 0 CN 0 0 VCC GND NC and schematic (for DC) The figure below is of the RT- PC relay. A relay is not equipped on the RT- PC. 0 0 VCC GND NC General tolerance: ±0. ±.0 Note: Above number is not marked on the itself. Wiring should be done according to the mark. The dimensions given in the diagram are the same for the RT- PC relay and RT- PC. However, a relay is not equipped on the RT- PC. ASCTB0E 00-T

7 RT-. S type input points RT- PC ±. ±.0 External dimensions.. -M. screw holes RT-IA0-00V-S RT-IA0-00V-S RT-ID0-V-S RT-ID0-V-S ±. ±.0. EXPANDER CONNECTOR. dia..0 dia. CN Mounting hole pattern. ±0.. ±.0 ±0..0 ± ±0.. ±.00 -M. screw holes or -.. dia. holes and schematic (for AC) CN and schematic (for DC) CN 0 0 VCC GND NC Note: Above number is not marked on the itself. Wiring should be done according to the mark. VCC GND NC General tolerance: ±0. ±.0. S type output points ) RT- PC relay RTSQ-OD-V-S RTSQ-OD-V-S ) RT- PC and schematic The figure below is of the RT- PC relay. A relay is not equipped on the RT- PC. RT-OD-V-S RT-OD-V-S Note: Above number is not marked on the itself. Wiring should be done according to the mark. The dimensions given in the diagram are the same for the RT- PC relay and RT- PC. However, a relay is not equipped on the RT- PC. VCC A+ B+ C+ D+ E+ F+ GND NC A- B- C- D- E- F- General tolerance: ±0. ±.0 * The output polarity applies only when AQC/AQC is mounted. Dimensions and Mounting hole pattern are the same as those of S type input points type. ASCTB0E 00-T

8 . S type output points ) RT- PC relay RTSQ-OD0-V-S RTSQ-OD0-V-S ) RT- PC and schematic The figure below is of the RT- PC relay. A relay is not equipped on the RT- PC. RT- 0 0 RT-OD0-V-S RT-OD0-V-S Note: Above number is not marked on the itself. Wiring should be done according to the mark. The dimensions given in the diagram are the same for the RT- PC relay and RT- PC. However, a relay is not equipped on the RT- PC. VCC GND NC General tolerance: ±0. ±.0 * The output polarity applies only when AQC/AQC is mounted. Dimensions and Mounting hole pattern are the same as those of S type input points type.. S type output points RT- PC RT-OD0-V-S RT-OD0-V-S ±. ±.0 ±. ±.0 EXPANDER CONNECTOR. -M. screw holes.. dia..0 dia. CN and schematic 0 0. Mounting hole pattern. ±0.. ± AY00 RT-OD0-V-S ±0.. ±.00 ±0..0 ±.00 -M. screw holes or -.. dia. holes VCC GND NC General tolerance: ±0. ±.0 * The output polarity applies only when AQC/AQC is mounted. Note: Above number is not marked on the itself. Wiring should be done according to the mark. ASCTB0E 00-T

9 RT-. S type output points RT- PC ( Form A Form B, Form A) RT-OD0-V-S RT-OD0-V-S ±. ±.0 ±. ±.0 EXPANDER CONNECTOR... dia..0 dia. -M. screw holes CN and schematic CN ±0.. ± AY00 RT-OD0-V-S Mounting hole pattern ±0..0 ±.00 ±0.. ±.00 -M. screw holes or -.. dia. holes VCC GND NC * The output polarity applies only when AQC/AQC is mounted. Note: Above number is not marked on the itself. Wiring should be done according to the mark. When Form A and Form B are loaded, 0+0, + is contact A and +, + is contact B. General tolerance: ±0. ±.0. input points ) RT- PC relay RTSQ-ID0-V-M RTSQ-ID0-V-M ) RT- PC and schematic (for AC) (RT- PC only) CN 0 0 RT-IA0-00V-M RT-IA0-00V-M RT-ID0-V-M RT-ID0-V-M Note: Above number is not marked on the itself. Wiring should be done according to the mark. The dimensions given in the diagram are the same for the RT- PC relay and RT- PC. However, a relay is not equipped on the RT- PC VCC GND NC and schematic (for DC) The figure below is of the RT- PC relay. A relay is not equipped on the RT- PC. CN VCC GND NC General tolerance: ±0. ±.0 CN 0 0 General tolerance: ±0. ±.0 Dimensions and Mounting hole pattern are the same as those of RT- PC relay S type input points type. However, be aware that only the connector is different for the S and s. ASCTB0E 00-T

10 . input points ) RT- PC relay RTSQ-OD-V-M RTSQ-OD-V-M ) RT- PC and schematic (for DC) The figure below is of the RT- PC relay. A relay is not equipped on the RT- PC. RT- RT-OD-V-M RT-OD-V-M Note: Above number is not marked on the itself. Wiring should be done according to the mark. The dimensions given in the diagram are the same for the RT- PC relay and RT- PC. However, a relay is not equipped on the RT- PC. VCC A+ B+ C+ D+ E+ F+ GND NC A- B- C- D- E- F- General tolerance: ±0. ±.0 * The output polarity applies only when AQC/AQC is mounted. Dimensions and Mounting hole pattern are the same as those of RT- PC relay S type input points type. However, be aware that only the connector is different for the S and s. ASCTB0E 00-T

11 RT- NOTES. Part number RT- PC relay is a device on which PQ relays are mounted. Ex.) Part No. of RT- PC RT-OD-V-S Part No. of RT- PC relay RTS-OD-V-S S is inserted to denote RT- PC relay.. Installation ) Perform mounting hole cutout according to the panel cutout drawings. ) When installing the unit on a DIN rail, use the DIN rail locking lever on the side of the unit. Installation is accomplished by simply fitting the unit onto the rail and pressing. First push in the DIN rail locking lever. DIN rail locking lever DIN rail Press the unit onto the DIN rail. Hook the holders on the unit over the DIN rail. To remove the unit from the DIN rail, use a flat head screwdriver to pull out the DIN rail locking lever. Remove the unit from the DIN rail. Insert the tip of the flat head screwdriver into the slot in the DIN rail locking lever. Move the screwdriver in the direction of the arrows, and pull out the lever. ) When installing the RT- PC to the control panel, leave at least a cm. inch space between the and neighboring equipment or ducts in order to ensure a space where the relay removal levers can operate. cm.inch Equipment or duct ) Be careful not to drop or shock the unit. Excessive shock such as dropping may cause damage or malfunction.. Wiring and circuit configuration ) Make all connections according to the schematic. DC specifications have polarity. The upper stage of the RT- PC is positive, and the lower stage is negative. ) The NC indicated in the schematic has no electrical connections. It can be used as a relay. ) When wiring power lines or power cables, twisted pair treatment (standed wire treatment) should be done in order to improve noise resistance. ) When the load output device is an inductive load type, installing a diode and surge absorber to both ends of the load is recommended. ) In order to improve noise resistance, class grounding of the control panel is recommended. ) Do not pass the wiring over the surface of the case. (When unavoidable, keep the wire at least cm. inch away from the surface of the case.) ) Turn off the power before connecting/ disconnecting connector cables. When connecting cables, align the cable connector Black triangle mark with the mark of the RT- PC main unit and connect it. Incorrect insertion may cause malfunctions.. Installing and removing the interface relay and SSR ) Turn the s of the interface relay and SSR in the same direction as the jack support and insert them securely. ) The interface relay and SSR can be easily removed by lowering the removal levers to the outside. When the levers are forcibly put down, the interface relay and SSR may jump out. Put your hand on the relay or SSR lightly and operate the levers.. Continuous parallel operation of interface relay and SSR When performing a continuous parallel operation of the interface relay and SSR, use them according to the load current vs. ambient temperature characteristic drawing and voltage vs. ambient temperature characteristic drawing.. Installing and removing the heat sink ) Install the heat sink according to the following drawing (Fig.). Remove it according to the following drawing (Fig.). ) Do not apply silicone grease to the heat sink. It may cause insufficient contact of the jack support. Heat sink Hold down clip Installation (Fig.) Hold one side of the heat sink. Press it down and hold the other side of it. Removal (Fig.) Insert a pair of tweezers of thin screwdriver and remove the spring in the direction of the arrow.. Operating environment ) Use the product at ambient operating temperature between 0 C and C F and F. (When installing in the control panel, take heat release into due consideration. Installing of the product at 0 degrees to the control panel is recommended. When installing the product horizontally or placing it on a heating unit, use a cooking fan.) ) Keep the supply voltage within the range of 0% to 0%V of the rated voltage. ) Keep the product as far away as possible from power cables, high tension equipment, power equipment, equipment with transmitting devices such as amateur radios, or equipment which generates a large switching surge. ) The main unit is made of resin; therefore, do not use it in areas where it may come in contact with (or be exposed to) organic solvents such as benzine, thinner, and alcohol, or strong alkaline substances such as ammonia and caustic soda. ) Do not use the product in areas where it may be exposed to flammable gases, corrosive gases, excessive dust, or moisture, or areas where it may be subjected to strong vibration or shock.. Transporting and storage ) If the product is subjected to extreme vibration while being transported, the relays may become detached, the lead may become bent, and the unit may become damaged. Handle the carton and case with care. ) If the product is stored in an extremely adverse environment, visible defects and deterioration of performance characteristics may result. We recommend the following storage conditions. Temperature: to 0 C to F Humidity: Max. 0% R.H. Environment: No hazardous substances such as sulfurous acid gases and little dust. ASCTB0E 00-T

12 . Precautions regarding wiring ) For input ±. ±.0.. ±0.. ±.0 0 ±.0 ±.0 -M. screw holds POWER 0 B A C D E F... dia..0 dia. RT- The voltage specifications (relay and ) are provided. When using the RT- PC relay, supply power to s (O+ to F+, O- to F-) according to the voltage specifications. For DC specifications, pay attention to the polarity. A short-circuit plate is also available. Supply the nominal voltage ( V DC or V DC) of the input circuit on the controller (PC etc.) to the power input s ((+), ( )). Use a noiseless power supply. When a -to- cable connector is connected to the input, use an input-only cable connector. If an output cable connector is used, it may cause damage or malfunction. 0 A B C D E F 0 A B C D E F Independent common use is available V DC or V DC ) For output ±. ±.0.. ±0.. ±.0 The voltage specifications (relay and ) are provided. Either V DC or 0 ±.0 ±.0 -M. screw holds.. V DC can be selected using the connecting controller. Since s (O+ to F+, O- to F-) are. dia..0 dia. output contacts, supply power according to the load. A -point short-circuit plate is also prepared. The power input s ((+), ( )) are used as a drive power supply for the relay and as an extra power supply for the output transistor of the controller. Match the voltage specifications of the controller to those of this unit. Use a noiseless power supply. When a -to- cable connector is connected to the output, use an output-only cable connector. If an input cable connector is used, it may cause damage or malfunction. POWER 0 A B C D E F L0 L L L L L L L L L L0 L L L L L 0 A B C D E F 0 A B C D E F AC (DC power is available.) Independent common use is available V DC or V DC ASCTB0E 00-T

13 RT- M TYPE RT- PC RELAY TERMINAL (for connection to Micro-controller). Connect the Micro-controller to RT- PC s as shown in the diagram below. MT Control board 0P P points 0-pin input cable points -pin cable for output Connect to Micro-controller using RT- PC relay. RT- PC relay -point for input RT- PC relay output -point Use the S type RT- PC relay for expansion. RT- PC relay S type input -point MT MT Expansion I/O board 0P P points 0-pin cable for input points -pin cable for output RT- PC relay input -point RT- PC relay output -point RT- PC relay S type input -point MT Control board 0P P points 0-pin for input cable points -pin cable for output RT- PC relay input -point RT- PC relay output -point RT- PC relay S type -point for input. For cable, see section on CABLE.. Implement the high-speed counter input and controller power supply as shown in the diagram below. For more information see the Microcontroller catalog. MT Control board 0P P cable AY* Loose wire (AWG) Blue IN.H /V Orange High-speed counter input cable AY*. Power supply ) Connecting RT- PC s to the MT Provide power from the same power source as that used for MT input and output. ) Connecting the s to the MT Because there is no power supply from the MT to the s, provide power to the + and - screw s of the. For more information see the Micro-controller catalog. MT Control board 0P P Pink /V Gray 0V Power for controller Loose wire (AWG) Blue IN.H/V Orange High-speed counter input ASCTB0E 00-T

14 CONNECTING POWER RELAYS. The main unit can be connected to power relays. (NC relay, HC relay, HL relay) Connecting NC, HC and HL relays to the RT- PC s allows the load switching of high capacity, application to form C contact and application to multielectrode contacts. ) When the power relay is connected to the output -point or -point RT- PC, it can be connected from the expansion connector. For connection from the expansion connector, our AZW bulk wire pressure welding socket is recommended. For the wiring, see the schematic of each. ) When the output jumper relay is installed and the voltage output from a controller (PC etc.) is taken out to the screw, the can be connected to the HC and HL sockets (the effect is the same as Fig. ). Expansion connector -point -point output HC socket Jumper relay mm.inch (same width) Fig. Fig. RT- Note: Set the current capacity per output of a controller (PC, etc.) to more than the nominal current of the HC or HL relay. EXPANSION OF RT- PC TERMINAL. When expanding the RT- PC, remove the expansion connector cover (EXPANDER CONNECTOR).. An expansion cable is available. Refer to section on CABLE.. Example of expansion ) The number of I/O points can be increased to points. Programmable controller I/O unit Cable Select to match the controller. RT- PC relay points Cable AY* RT- PC relay points ) Expansion up to points chained devices with MT and MT is only possible with 0-point expansion I/O board (input -point). MT, MT expansion I/O board input 0-point (input -point) Cable AY* RT- PC relay points Cable AY* RT- PC relay S type points ) Since the AC input can be expanded to the DC input and vice versa, the number of DC and AC input points can be divided within the range of points. Example: DC input points AC input points AC input points DC input points DC input points. Power supply when expanding When expanding the RT- PC, be sure to supply power to the expansion RT- PC block screw s (+) ( ) (see the drawing). Even when power is supplied to the expanded the, it will not operate. The Power LED lights up only for the expansion the and it does not light for the expanded the. ASCTB0E 00-T

PC RELAY TERMINAL/ PC TERMINAL

PC RELAY TERMINAL/ PC TERMINAL Input points Output points PC Relay (PC relays mounted) PC Input points Output points Input points Output points Input points Output points Input points Output points Output points ORDERING INFORMATION

More information

Transistor drive 2c/4c 5A slim power relays

Transistor drive 2c/4c 5A slim power relays Transistor drive c/c 5A slim power relays NC RELAYS NC Flat type () NC (Plug-in type) RoHS compliant NC Flat type () NC () FEATURES 1. Compact, slim design Use of high-performance flat electromagnetic

More information

Long seller backed by product variety and high reliability

Long seller backed by product variety and high reliability Long seller backed by product variety and high reliability DS RELAYS RoHS compliant FEATURES 1. Breakthrough height of 9.8 mm.386 inch beats the 1 mm.394 inch limit 1c and 2c all have the same height (9.8

More information

HIGHLY SENSITIVE 1500 V FCC SURGE BREAKDOWN VOLTAGE MINIATURE RELAY

HIGHLY SENSITIVE 1500 V FCC SURGE BREAKDOWN VOLTAGE MINIATURE RELAY HIGHLY SENSITIVE 1500 V FCC SURGE BREAKDOWN VOLTAGE MINIATURE RELAY DS RELAYS RoHS Directive compatibility information http://www.mew.co.jp/ac/e/environment/ FEATURES 1. Breakthrough height of 9.8 mm.386

More information

2.6 GHz capable, 10 W carrying power (at 2.6 GHz), 50Ω/75Ω impedance and 1 Form C relays

2.6 GHz capable, 10 W carrying power (at 2.6 GHz), 50Ω/75Ω impedance and 1 Form C relays .6 GHz capable, W carrying power (at.6 GHz), 5Ω/75Ω impedance and Form C relays RE RELAYS (ARE)..44..44 mm inch FEATURES Excellent high frequency characteristics (to.6ghz) Surface-mount type also available

More information

Long seller backed by product variety and high reliability

Long seller backed by product variety and high reliability Long seller backed by product variety and high reliability DS RELAYS Compliance with RoHS Directive FEATURES 1. Breakthrough height of 9.8 mm.386 inch beats the 1 mm.394 inch limit 1c and 2c all have the

More information

HIGHLY SENSITIVE 1500 V FCC SURGE BREAKDOWN VOLTAGE MINIATURE RELAY

HIGHLY SENSITIVE 1500 V FCC SURGE BREAKDOWN VOLTAGE MINIATURE RELAY HIGHLY SENSITIVE 15 V FCC SURGE BREAKDOWN VOLTAGE MINIATURE RELAY DS RELAYS FEATURES 1. Breakthrough height of 9.8 mm.386 inch beats the 1 mm.394 inch limit 1c, 2c, and 4c all have the same height (9.8

More information

Load current 10 to 25 A Small Tab Terminal SSR

Load current 10 to 25 A Small Tab Terminal SSR UL (9-1) reinforced insulation compliant Load current to A Small Tab Terminal SSR RELAYS ORDERING INFORMATION Output type 1: A, 7 to 4 Vrms : A, 7 to 4 Vrms 4: A, 7 to 4 Vrms Slim heat sink combined type

More information

Timers. GT5Y Series ON Delay Timers. ±3% maximum (over 10 to 50 C, reference temperature 20 C) Setting Error. ±10% maximum

Timers. GT5Y Series ON Delay Timers. ±3% maximum (over 10 to 50 C, reference temperature 20 C) Setting Error. ±10% maximum GT5Y GT5Y Series ON Delay Key features: 4PDT, 3A or DPDT, 5A contacts 4 time ranges Repeat error ±0.2% maximum Control settings by hand or screwdriver Power ON and timing out LED indicators Uses the same

More information

Slim Relay G2RV. Model Number Structure. Ordering Information. Model Number Legend. List of Models. Relay and Socket Combinations

Slim Relay G2RV. Model Number Structure. Ordering Information. Model Number Legend. List of Models. Relay and Socket Combinations Slim Relay G2RV The World's First Industrial Slim Relay Large plug-in terminals for reliable connection. LED indicator and mechanical flag to check operation. Transparent housing enables checking relay

More information

EE-SPX74/84. Ordering Information. Compact Sensor for High-Density Mounting with Easy Snap-In Connector. H Connector features a built-in safety

EE-SPX74/84. Ordering Information. Compact Sensor for High-Density Mounting with Easy Snap-In Connector. H Connector features a built-in safety Compact for High-Density Mounting with Easy Snap-In Connector H Connector features a built-in safety lock for shock and vibration resistance H replacement made simple without rewiring H Cables can be bent

More information

1 Form A 8A/16A, Small Polarized Power Relays (latching type)

1 Form A 8A/16A, Small Polarized Power Relays (latching type) 8A/16A, Small Polarized Power Relays (latching type) DW RELAYS (ADW1) New Low profile type (Inrush type) FEATURES 1. Low profile type available (h = 15.8 mm.622 inch) 2. Inrush type available (TV-8 UL/C-UL

More information

Load current 10 to 25A Small Tab Terminal SSR

Load current 10 to 25A Small Tab Terminal SSR UL (9-1) reinforced insulation compliant Load current 1 to 2A Small Tab Terminal SSR AQ-J RELAYS Slim heat sink combined type RoHS compliant ORDERING INFORMATION Output type 1: 1A, 7V to 24V AC 2: A, 7V

More information

GT3F Series True OFF Delay Timers

GT3F Series True OFF Delay Timers TF Series TF Series True OFF Delay Key features of the TF series include: Mountable in sockets or flush panel True power OFF-delay up to 10 minutes No external control switch necessary Available with reset

More information

DIN Rail Mounting Accessories. Style Appearance Use with Timers Part No. Appearance Part No. RTE-P2 SR3P Pin FingerSafe Socket RTE-P2 SR3P-05C

DIN Rail Mounting Accessories. Style Appearance Use with Timers Part No. Appearance Part No. RTE-P2 SR3P Pin FingerSafe Socket RTE-P2 SR3P-05C RTE Series DIN Rail Mounting Accessories Part Numbers: DIN Rail/Surface Mount Sockets and Hold-Down Springs DIN Rail Mount Socket Applicable Hold-Down Springs Style Appearance Use with Part No. Appearance

More information

FOR PC BOARD TO FLAT CABLE

FOR PC BOARD TO FLAT CABLE AXM FOR PC BOARD TO FLAT CABLE MIL CONNECTORS (AXM) Density mounting Long lever type Short lever type Compliance with RoHS Directive FEATURES 1. High density mounting is possible. Even with mounting right

More information

Leading the market, our 5 mm 2-pole surface mount relays comply with JIS C0806

Leading the market, our 5 mm 2-pole surface mount relays comply with JIS C0806 Leading the market, our 5 mm -pole surface mount relays comply with JIS C86 TQ TQ RELAYS Compliance with RoHS Directive FEATURES 1. Flat compact size 14.(L) 9.(W) 5.(H).551(L).354(W).197(H). : High sensitivity

More information

Industrial Control Relays Relays and terminal module RS type

Industrial Control Relays Relays and terminal module RS type Relaysandterminal module Relays-and-terminal module RS, N A very compact, space-saving terminal module containing four or six relays with one NO contact. Features The RS series relays-and-terminal module

More information

Model Number Structure

Model Number Structure Solid State Relays with Failure Detection Function G3PC CSM_G3PC_DS_E_1_1 Refer to Safety Precautions for All Solid State Relays. Detects failures in SSR used for heater temperature control and simultaneously

More information

Compact high capacity, (25A max) Slim heat sink combined type added

Compact high capacity, (25A max) Slim heat sink combined type added Compact high capacity, (A max) Slim heat sink combined type added UL (9-1) reinforced insulation compliant RELAYS New Slim heat sink combined type Compliance with RoHS Directive FEATURES 1. Compact Size

More information

Classification Enclosure rating Input voltage Type of

Classification Enclosure rating Input voltage Type of Slim Relay G2RV The World's First Industrial Slim Relay Large plug-in terminals for reliable connection. LED indicator and mechanical flag to check operation. Special input type with gold plated contacts.

More information

J8 SWITCHES WITH TRIP FUNCTION UPGRADED TYPE

J8 SWITCHES WITH TRIP FUNCTION UPGRADED TYPE POWER ROCKER SWITCH J8 SWITCHES WITH TRIP FUNCTION UPGRADED TYPE FEATURES 1. Power switches with an electromagnetic reset function which meet the need for energy savings in equipment and for safety. Applications

More information

Ultra Slim Relays 24

Ultra Slim Relays 24 Ultra Slim Relays 24 Technical Data... 1 Specifications.2 Model Number Structure - Relays...3 Model Number Selection...4 Accessories...5 Safety Precautions...6 Ultra Slim Relays WERNER`s embody the latest

More information

H3CA-8H-AC/100/110/120

H3CA-8H-AC/100/110/120 Solid-State Timer 1/16 DIN, Digital-Set Timer with 0.1 Second to 9,990 Hours Range 8 field-selectable operation modes Universal AC/DC supply voltage timers available Operations include ON-delay, Repeat

More information

Compact high capacity, (25A max) Slim heat sink combined type added

Compact high capacity, (25A max) Slim heat sink combined type added Compact high capacity, (2A max) Slim heat sink combined type added UL (9-1) reinforced insulation compliant AQ-J AQ-J RELAYS New Slim heat sink combined type Compliance with RoHS Directive FEATURES 1.

More information

Model Number Structure

Model Number Structure Solid State Relays with Failure Detection Function G3PC Detects failures in SSR used for heater temperature control and simultaneously outputs alarm signal. This SSR supports the safe design of heater

More information

G3PC. Model Number Structure. Solid State Relays with Failure Detection Function. Model Number Legend

G3PC. Model Number Structure. Solid State Relays with Failure Detection Function. Model Number Legend Solid State Relays with Failure Detection Function G3PC Refer to Warranty and Application Considerations (page 1), Safety Precautions (page 4), and Technical and Safety Information (page 6). Detects failures

More information

WA OPTICAL SWITCHES (AWAP)

WA OPTICAL SWITCHES (AWAP) Compactness and High Reliability Realized with Unique Polarized Actuator Construction Non-latching Type Also Available WA OPTICAL SWITCHES (AWAP) RoHS compliant ORDERING INFORMATION FEATURES. Small size,

More information

Input/output relays for interface between the CPU and the load

Input/output relays for interface between the CPU and the load Input/output relays for interface between the CPU and the load -RELAYS RoHS compliant FEATURES. Input and output s for interfacing between CPU and external input devices or loads : AC input (yellow) :

More information

MINI-ISO AUTOMOTIVE RELAY

MINI-ISO AUTOMOTIVE RELAY MINI-ISO AUTOMOTIVE RELAY CB RELAYS RoHS compliant FEATURES This relay has an Mini-ISO (International Organization for Standardization) terminal arrangement. Relay is compact and high capacity (4 A). Compact

More information

G3NE. Ordering Information. Solid State Relay. Compact, Low-cost, SSR Switching 5to20A J ACCESSORIES (ORDER SEPARATELY) Solid State Relay G3NE

G3NE. Ordering Information. Solid State Relay. Compact, Low-cost, SSR Switching 5to20A J ACCESSORIES (ORDER SEPARATELY) Solid State Relay G3NE Solid State Relay G3NE Compact, Low-cost, SSR Switching 5to20A D Wide load voltage range: 75 to 264 VAC. D Dedicated, compact aluminum PCB and power elements used. D Built-in varistor effectively absorbs

More information

FPC connectors (0.2mm pitch) Back lock

FPC connectors (0.2mm pitch) Back lock 0.9 AYF21 For FPC FPC connectors (0.2mm pitch) Back lock Y2B Series New FEATURES 1. Slim and low profile design (Pitch: 0.2 mm) 0.2 mm pitch back lock design and the slim body with a 3.15 mm depth (with

More information

PRODUCT SPECIFICATION. PC Board Relays. Series.

PRODUCT SPECIFICATION. PC Board Relays. Series. PRODUCT SPECIFICATION PC Board Relays 26 Series www.wernerelektrik.com Technical Data... Specifications...2 Model Number Structure - Relays...3 Model Number Selection...4 Dimensions... 5-6 Accessories...7

More information

One step ahead in performance and mounting ease

One step ahead in performance and mounting ease 95 Micro Photoelectric Amplifier Built-in PM-5 SERIES PM-45 SERIES PM-5 SERIES General terms and conditions... F- guide... P.9~ Related Information Glossary of terms / General precautions...p.1549~ / P.155~

More information

Distributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. TESTING LOW PROFILE 2 FORM C RELAY TQ RELAYS 9.354 26.7 +.4 1.51 5.2 +.16.8

More information

T imers Timers Selection Guide Timing Diagrams Overview RTE Series Analog Timers Instructions onlinecomponents.com IDEC.

T imers Timers Selection Guide Timing Diagrams Overview RTE Series Analog Timers Instructions onlinecomponents.com IDEC. Industrial Automation Catalog Section - U906 imers Selection uide iming Diagrams Overview RE Series Analog imers Instructions imers For up-to-date information, or to request a full copy of this catalog,

More information

PRESET HOUR METER. FEATURES 1. Preset function equipped in half size (24 48 mm inch). 2. Display has backlight for instant recognition.

PRESET HOUR METER. FEATURES 1. Preset function equipped in half size (24 48 mm inch). 2. Display has backlight for instant recognition. PRESE HOUR MEER Hour Meter FEAURES 1. Preset function equipped in half size (24 48 mm.94 1.89 inch). 2. Display has backlight for instant recognition. ime counting iming up Red or (Green) (backlight) 3.

More information

Model Number Structure

Model Number Structure Solid State Relays CSM DS_E_3_1 Compact, Low-cost, SSR Switching 5 to 20 A Wide load voltage range: 75 to 264 VAC. Both 100-V and 200-V loads can be handled with the same model. Dedicated, compact aluminum

More information

Relays & Sockets. RQ Series. RQ Series PCB Relays Part Number Selection

Relays & Sockets. RQ Series. RQ Series PCB Relays Part Number Selection Q Series Q Series PB elays Switches & Pilot Lights Display Lights IDE Q relays are low-profile, PB relays that provide quality within a compact package. Size equals value. Q relays are small, yet maintain

More information

POWER ROCKER SWITCH. Standard actuator type Wide actuator type UL/C-UL, ENEC/VDE UL/C-UL, ENEC/VDE

POWER ROCKER SWITCH. Standard actuator type Wide actuator type UL/C-UL, ENEC/VDE UL/C-UL, ENEC/VDE POWER ROCKER SWITCH SWITCHES AJ8 switch Standard actuator AJ8 switch Wide actuator FEATURES 1. Power rocker switches for safety requirements. All versions comply with ClassII EN61058-1 insulation grade.

More information

AUTOMOTIVE MICRO-ISO RELAY FEATURES

AUTOMOTIVE MICRO-ISO RELAY FEATURES AUTOMOTIVE MICRO-ISO RELAY RELAYS...... Compliance with RoHS Directive FEATURES Micro-ISO type terminals Small size: mm(l) mm(w) mm(h). inch(l). inch(l). inch(h) Wide line-up PC board and, Resistor and

More information

Contact form. Operating Force. Plunger SPDT 204g Dust- Proof (in closed position) Plunger SPST-NC 204g Dust- Proof (in closed position)

Contact form. Operating Force. Plunger SPDT 204g Dust- Proof (in closed position) Plunger SPST-NC 204g Dust- Proof (in closed position) D3D Miniature Door Switch Appliance industry standard plunger and lever actuator styles High contact reliability ensured using gold alloy crossbar contacts Drip/spill sealing in free position (plunger

More information

DIO-1616LN-FIT. Features. Specifications. Ethernet Remote I/O F&eIT N Series Isolated Digital Input/Output Unit DIO-1616LN-FIT 1. Ver.1.

DIO-1616LN-FIT. Features. Specifications. Ethernet Remote I/O F&eIT N Series Isolated Digital Input/Output Unit DIO-1616LN-FIT 1. Ver.1. Ethernet Remote I/O F&eIT N Series Isolated Digital / DIO-1616LN-FIT * Specifications, color and design of the products are subject to change without notice. This product is an isolated digital input and

More information

Communication & Networking

Communication & Networking MicroSmart Master Module Capable of Connecting 62 Slaves Compliance with Ver. 2.1 specifi cations Digital and analog slaves can be connected. Configuration and slave monitoring can be done using LED indicators

More information

PROGRAMMABLE CONTROLLER. FP0 A/D Converter Unit. Technical Manual ARCT1F321E

PROGRAMMABLE CONTROLLER. FP0 A/D Converter Unit. Technical Manual ARCT1F321E PROGRAMMABLE CONTROLLER Technical Manual ARCT1F321E-2 2008.11 Safety Precautions Observe the following notices to ensure personal safety or to prevent accidents. To ensure that you use this product correctly,

More information

User's Manual. FP7 Digital Input/Output Unit PROGRAMMABLE CONTROLLER

User's Manual. FP7 Digital Input/Output Unit PROGRAMMABLE CONTROLLER PROGRAMMABLE CONTROLLER FP7 Digital Input/Output Unit User's Manual Safety Precautions Observe the following notices to ensure personal safety or to prevent accidents. To ensure that you use this product

More information

AUTOMOTIVE MICRO-ISO RELAY FEATURES

AUTOMOTIVE MICRO-ISO RELAY FEATURES AUTOMOTIVE MICRO-ISO RELAY RELAYS..... FEATURES. Micro-ISO type terminals Small size: mm(l) mm(w) mm(h). inch(l). inch(l). inch(h) Wide line-up PC board and, Resistor and diode inside type. type is also

More information

Slim Industrial Relay Type RSLM Electromechanical

Slim Industrial Relay Type RSLM Electromechanical Type RSLM Electromechanical RSLM Slim size (width 5mm) High breakdown voltage 4kV (between coil and contacts) Surge voltage up to 6kV (between coil and contacts) Conforms to VDE 0700, 0631 reinforced insulation

More information

Combine Relays and P7TF Block Bases to match your application requirements. Use the table below to configure Relay Blocks.

Combine Relays and P7TF Block Bases to match your application requirements. Use the table below to configure Relay Blocks. 9 Relay I/O Block Reduces Wiring within the Control Panel and Reduces Installation Time 1 Compact 16-pt models: 182 W l 85 D l 68 H mm; 8-pt block width is 102 mm 1 Can be connected to the PLC with a connecting

More information

Package Contents. GP Options (Made by Digital)

Package Contents. GP Options (Made by Digital) When connecting the power cord terminals to the GP, be sure the cord has first been unplugged from the power outlet to prevent the possibility of an electric shock. With the exception of changing the GP's

More information

Varistor installation. Input logic. Voltage of relay coil

Varistor installation. Input logic. Voltage of relay coil Features For driving various loads using PLC output signals Easily check operation status and high luminance LED turns on with input signals Choose various relays depending on each load voltage or current

More information

Solid-state Timer H3YN

Solid-state Timer H3YN Solid-state Timer H3YN Miniature Timer with Multiple Time Ranges and Multiple Operating Modes Minimizes stock. Pin configuration compatible with MY Power Relay. Standard multiple operating modes and multiple

More information

Connector Built-in U-shaped Micro Photoelectric Sensor. Approximately 60 % of previous model Detachable

Connector Built-in U-shaped Micro Photoelectric Sensor. Approximately 60 % of previous model Detachable 44 Connector Built-in Micro Photoelectric SERIES Related Information General terms and conditions... F-1 Glossary of terms... P.1~ selection guide... P.441~ General precautions... P.140 Amplifier Built-in

More information

onlinecomponents.com

onlinecomponents.com 0.9 For FPC FPC connectors (0.3mm pitch) Back lock Y3B Series New FEATURES 1. Slim and low profile design (Pitch: 0.3 mm) The use of a back lock mechanism enables a 3.15 mm (with lever) low profile design.

More information

Terminals Solder terminals Quick-connect. PCB terminals terminals (#110) 3 A Pin plunger SS-3GP SS-3GPT SS-3GPD SS-3GPB

Terminals Solder terminals Quick-connect. PCB terminals terminals (#110) 3 A Pin plunger SS-3GP SS-3GPT SS-3GPD SS-3GPB Subminiature Basic Switch SS-P SS Series Compatible Mounting with a Simple Construction and Easy-to-Use Design Concept Insert molded base and improved case-to-base seal provides enhanced resistance to

More information

HIGH PERFORMANCE MINIATURE SWITCHES WITH WIDE RANGE

HIGH PERFORMANCE MINIATURE SWITCHES WITH WIDE RANGE HIGH PERFORMANCE MINIATURE SWITCHES WITH WIDE RANGE NV (AH7) SWITCHES FEATURES Extra long-life spring mechanism More than 10 7 mechanical operations, 10 electrical High contact rating of 1 Amps with an

More information

onlinecomponents.com

onlinecomponents.com Standard-type Connector- Conversion Units XWB CSM_XWB_DS_E Simplifies Connector and terminal block replacement, and requires less in-panel wiring. Mount to DIN Track or via screws. MIL Flat Cable Connectors

More information

Pin plunger D2JW-011 D2JW-011-MD. Short hinge lever D2JW-01K1A1 D2JW-01K1A1-MD. Hinge lever D2JW-01K11 D2JW-01K11-MD

Pin plunger D2JW-011 D2JW-011-MD. Short hinge lever D2JW-01K1A1 D2JW-01K1A1-MD. Hinge lever D2JW-01K11 D2JW-01K11-MD Sealed Snap ction Switch DJW Immersion-Proof Subminiature Snap ction Switch Ultra-small and highly sealed Water-tight housing conforming to IEC IP67 Wide range of operating temperature from -40 to 85 C

More information

Setting method Indication Control Output Model method mode Thermocouple (with sensor burnout detection circuit)

Setting method Indication Control Output Model method mode Thermocouple (with sensor burnout detection circuit) Temperature Controller DIN-sized (48 x 48 mm) Temperature Controller With Digital Setting Compact, low-cost Temperature Controller Incorporates proportional adjustment and reset adjustment function. Incorporates

More information

RS232C/RS485 Data can be easily monitored by LAN

RS232C/RS485 Data can be easily monitored by LAN KS SIGNAL CVERTER (AKS) RSC/RS8 Data can be easily monitored by LAN KS SIGNAL CVERTER FEATURES The connectors are located on the front panel. Easy to connect Easy to operate Can be connected to the LAN

More information

LCD Readout Digital Pressure Switch

LCD Readout Digital Pressure Switch LCD Readout Digital Pressure Switch Series 3 (For )/ 3 (For Positive Pressure) For General Pneumatics Easy pressure setting with the digital display Can be integrated with a vacuum unit, Series ZX Built-in

More information

(Applicable output load) to 264 (see note 2) (see note 1) (2Aat75to264VAC) G3R-202SLN-US PCB Yes 2 A at 100 to 120 VDC. (2 A at 75 to 132 VDC)

(Applicable output load) to 264 (see note 2) (see note 1) (2Aat75to264VAC) G3R-202SLN-US PCB Yes 2 A at 100 to 120 VDC. (2 A at 75 to 132 VDC) Solid-state Relay Compact SSRs Ideal for Built-in Applications Vertical, compact SSRs with an operation indicator offered in versatile variations. Can be mounted side by side with an electromagnetic relay

More information

Ordering Information. Smart Sensors (Inductive Displacement Type) ZX Series. Sensors

Ordering Information. Smart Sensors (Inductive Displacement Type) ZX Series. Sensors Smart Sensors (Inductive Displacement Type) ZX Series Smart Sensors that use the eddy current method are now available. Develop new applications with sub-micron sensing technology.. Ordering Information

More information

User's Manual. FP7 Digital Input/Output Unit PROGRAMMABLE CONTROLLER

User's Manual. FP7 Digital Input/Output Unit PROGRAMMABLE CONTROLLER PROGRAMMABLE CONTROLLER FP7 Digital Input/Output Unit User's Manual Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com Safety Precautions Observe the following notices

More information

S8VE (60/90/120/180/240-W Models)

S8VE (60/90/120/180/240-W Models) Switch Mode Power Supply S8VE (60/90/120/180/240-W Models) CSM_S8VE_DS_E_1_1 60/90/120/180/240-W Models Improved Versions of Standard-type Power Supplies without Indication Monitor. Safety standards: UL508/60950-1,

More information

Mini Photoelectric Sensor

Mini Photoelectric Sensor Mini Photoelectric Sensor High cost-performance Mini Photoelectric Sensor Saves Installation Space and Wiring Effort and Detects Minute Sensing Objects Pin-point beam (1 to 2-mm dia.) makes it possible

More information

Contact form. Operating Force. SPDT 25g Unsealed Solder / 187 Quick Connect. SPDT 50g Unsealed Solder / 187 Quick Connect

Contact form. Operating Force. SPDT 25g Unsealed Solder / 187 Quick Connect. SPDT 50g Unsealed Solder / 187 Quick Connect VX Miniature Snap Action Switch Compact snap action switch with low force operation Internal mechanism assures outstanding contact reliability Models available for micro load up through 5 Amps ROHS Compliant

More information

Ordering Information. I/O Relay G7T. Model Number Legend Slim-styled I/O Relay Saves Space in Panel

Ordering Information. I/O Relay G7T. Model Number Legend Slim-styled I/O Relay Saves Space in Panel I/O Relay CSM DS_E_2_ Slim-styled I/O Relay Saves Space in Panel SPST-NO, SPST-NC, and SPDT contact forms available for output (SPST-NO only for input). Ultra-slim housing measuring 29 (W) x 0 (D) x 2

More information

Slim Relay G2RV. Features. Test switch operation. Protection cover: lock. Protection cover: unlock. Protection cover open. Protection cover close

Slim Relay G2RV. Features. Test switch operation. Protection cover: lock. Protection cover: unlock. Protection cover open. Protection cover close Slim Relay GRV The only truly industrial 6 mm relay Lockable test switch models now available. Large plug-in terminals for reliable connection. LED indicator and mechanical flag for status indication.

More information

Solder terminals D2FD-2L0-1H D2FD-01L0-1H. PCB terminals D2FD-2L0-1T D2FD-01L0-1T. Hinge lever Solder terminals D2FD-2L1-1H D2FD-01L1-1H

Solder terminals D2FD-2L0-1H D2FD-01L0-1H. PCB terminals D2FD-2L0-1T D2FD-01L0-1T. Hinge lever Solder terminals D2FD-2L1-1H D2FD-01L1-1H Ultra subminiature and dust proof Sealing by using rubber packing means the switch can be used in dust-proof environments (IEC IP6X). Switch rating of 2 A at 125 VAC possible with a single-leaf movable

More information

Cylindrical Proximity Sensor

Cylindrical Proximity Sensor Cylindrical Proximity Sensor A New Series of Easy-to-use and Tough Models with a Yellow Indicator New series of TL-X2C1-GE models with improved performance over the previous TL-X-E models. Also, in addition

More information

Model Number Structure

Model Number Structure Thumbwheel Switch Refer to Warranty and Application Considerations (page 1) and Safety Precautions (page 3). General-purpose Thumbwheel Switches A wide range of output codes are available. Use the back-mounting

More information

Model Number Structure

Model Number Structure Analogue Temperature Controller E5C2 DIN-sized (48 x 48 mm) Temperature Controller with Analog Setting Compact, low-cost Temperature Controller. Incorporates proportional control and reset adjustment function.

More information

Digital Timer. Ordering Information. 1/16 DIN, Quartz Timer with Four-Digit LED Display

Digital Timer. Ordering Information. 1/16 DIN, Quartz Timer with Four-Digit LED Display Digital Timer 1/16 DIN, Quartz Timer with Four-Digit LED Display Five wide ranges to choose from Wide-range AC or DC supply voltages Elapsed time (UP) or time remaining (DOWN) display available Selectable

More information

Network Instrumentation Module Communications box NX-CB1 Communications adapter NX-CL1/NX-CR1 Terminal adapter NX-TL1/NX-TR1

Network Instrumentation Module Communications box NX-CB1 Communications adapter NX-CL1/NX-CR1 Terminal adapter NX-TL1/NX-TR1 No. CP-SS-1865E Network Instrumentation Module Communications box NX-CB1 Communications adapter NX-CL1/NX-CR1 Terminal adapter NX-TL1/NX-TR1 Overview Network Instrumentation Modules make optimal distributed

More information

E3S-A. Built-in Amplifier Photoelectric Sensor (Medium Size) Ordering Information. Built-in Amplifier Photoelectric Sensors. Horizontal. 7 m.

E3S-A. Built-in Amplifier Photoelectric Sensor (Medium Size) Ordering Information. Built-in Amplifier Photoelectric Sensors. Horizontal. 7 m. Built-in Amplifier (Medium Size) ES-A CSM_ES-A_DS_E Be sure to read Safety Precautions on page 0. Ordering Information Built-in Amplifier s Red light Infrared light Sensing method Appearance Connection

More information

IO-DI8-TO8 I/O Expansion Module 8 Inputs, 8 Outputs

IO-DI8-TO8 I/O Expansion Module 8 Inputs, 8 Outputs IO-DI8-TO8 I/O Expansion Module 8 Inputs, 8 Outputs The IO-DI8-TO8 is an I/O expansion module that can be used in conjunction with specific Unitronics OPLC controllers. The module offers 8 digital inputs,

More information

TCNM-ACBB1 Installation Manual

TCNM-ACBB1 Installation Manual The TCNM-ACBB1 is a connection box that can be used as an accessory to facilitate system connections for installation and device replacement of several Banner family reading devices. System cabling is

More information

4 C/O. Contact material AgNi AgNi gold-plated Nominal contact current Inrush current

4 C/O. Contact material AgNi AgNi gold-plated Nominal contact current Inrush current Quattro-Relais Quattro Relay 4 Quattro Relay 4A4 Standard type / With LED and protection diode on request Quattro-Relais Order Code Order Code Quattro Relay 4 A 4 4 V DC N Type of relay Quattro Relay 4

More information

Inductive Proximity Sensor

Inductive Proximity Sensor Inductive Proximity Sensor Subminiature Sensor with Cable Amplifier Offers Greater Mounting Flexibility Programmable Controller-compatible Subminiature, shielded sensing head (3 or 8 dia.) allows the Sensor

More information

H3CR-F H3CR-F8 H3CR-F-300 H3CR-F8-300

H3CR-F H3CR-F8 H3CR-F-300 H3CR-F8-300 R Solid-State Repeat-Cycle Timer 1/1 DIN Solid-State Repeat-Cycle Timer Wide power supply ranges of 100 to 240 VAC 24 VAC/VDC, 12VDC Combinations of independent long or short / time settings are possible

More information

MODEL: M5DY SEN TRONIC AG CURRENT LOOP SUPPLY. [2] POWER INPUT AC Power M: V AC (Operational voltage range V, Hz)

MODEL: M5DY SEN TRONIC AG CURRENT LOOP SUPPLY. [2] POWER INPUT AC Power M: V AC (Operational voltage range V, Hz) Super-mini Terminal Block Signal Conditioners M5-UNIT CURRENT LOOP SUPPLY Functions & Features Powering a 0 ma DC current loop Applicable to smart transmitters Isolation between the input and output Fast

More information

Light ON 5m. * Light ON. 2.5m (3m) Light ON. (5m)

Light ON 5m. * Light ON. 2.5m (3m) Light ON. (5m) All voltage photoelectric sensors Built-in amplifier accepts wide supply voltage range. Slim, space-saving construction measures only x x 7.4 mm. s with long life expectancy and high switching capacity

More information

MODEL: R1M-D1. PC Recorders R1M Series. SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.)

MODEL: R1M-D1. PC Recorders R1M Series. SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.) PC Recorders R1M Series PC RECORDER (contact output, 32 points) Functions & Features Industrial recorder on PC 32-point open collector outputs Easy system expansion via Modbus RTU Recorded data exportable

More information

Common to all H3DS. Installation of Screw-Less Clamp Models. Tools. Applicable Wires. Applicable Screwdriver. Applicable Wire Sizes

Common to all H3DS. Installation of Screw-Less Clamp Models. Tools. Applicable Wires. Applicable Screwdriver. Applicable Wire Sizes Common to all H3DS Installation of Screw-Less Clamp Models Tools A flat-blade screwdriver should be used to mount the cables. Timers Applicable Screwdriver Flat-blade, Parallel-tip, 2.5 mm diameter Flat-blade,

More information

Bulletin 700-SH Solid-State Relays. Overview/Product Selection. Bulletin 700-SH. Product Selection

Bulletin 700-SH Solid-State Relays. Overview/Product Selection. Bulletin 700-SH. Product Selection Overview/Product Selection Bulletin 700-SH 40 A (resistive) Max. Continuous (Output) Current with Heat Sink 264V AC or 528V AC Max. Voltage Range Options 5 24V DC, 100 120V AC, 200 240V AC Control Input

More information

MODEL: R1M-A1. PC Recorders R1M Series. SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.)

MODEL: R1M-A1. PC Recorders R1M Series. SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.) PC Recorders R1M Series PC RECORDER (contact input, 32 points) Functions & Features Industrial recorder on PC 32-point dry contact inputs Easy system expansion via Modbus RTU Recorded data exportable to

More information

G9SA. Ordering Information. Safety Relay Unit. The G9SA Series Offers a Complete Line of Compact Units. H Several types of 45-mm wide Units are

G9SA. Ordering Information. Safety Relay Unit. The G9SA Series Offers a Complete Line of Compact Units. H Several types of 45-mm wide Units are Safety Relay Unit The G9SA Series Offers a Complete Line of Compact Units H Several types of -mm wide Units are available: a -pole model, a -pole model, models with poles and OFF-delay poles H 7.-mm wide

More information

GL SERIES. Compact & Low Price Inductive Proximity Sensor. Wide variety, high performance in surprisingly small body at low cost.

GL SERIES. Compact & Low Price Inductive Proximity Sensor. Wide variety, high performance in surprisingly small body at low cost. 811 Compact & ow Price Inductive Proximity Sensor SERIES Related Information General terms and conditions... F-3 Glossary of terms...p.176~ guide... P.781~ General precautions... P.179~ PHOTO PHOTO MEASURE

More information

Note: Each relay to be mounted must incorporate a coil that has proper specifications within the maximum rated voltage range.

Note: Each relay to be mounted must incorporate a coil that has proper specifications within the maximum rated voltage range. I/O Block Base G7A Reduces Wiring while Providing I/O Flexibility Mount I/O relays and I/O SSRs freely. Electric-shock preventive (finger-touch protection) terminal block incorporated conforming to VDE

More information

DC 3-wire Cylindrical Inductive Proximity Sensor. Long sensing range

DC 3-wire Cylindrical Inductive Proximity Sensor. Long sensing range INDUCTIVE SERIES DC 3-wire Cylindrical Inductive Proximity Oil resistant Metal embedding possible Amplifier Built-in GX G-6 High performance and environmental resistance at low price G-8/8U GA-/GH GX GX-U/FU

More information

Ordering Information. I/O Relay G7T. Model Number Legend Slim-styled I/O Relay Saves Space in Panel

Ordering Information. I/O Relay G7T. Model Number Legend Slim-styled I/O Relay Saves Space in Panel I/O Relay CSM DS_E_4_4 Slim-styled I/O Relay Saves Space in Panel SPST-NO, SPST-NC, and SPDT contact forms available for output (SPST-NO only for input). Ultra-slim housing measuring 29 (W) x 0 (D) x 2

More information

Common to all H3CR. Basic Setting. Setting of Selectors. Selection of Operating Mode. Selection of Time Unit and Time Range. Common to all H3CR 1

Common to all H3CR. Basic Setting. Setting of Selectors. Selection of Operating Mode. Selection of Time Unit and Time Range. Common to all H3CR 1 Common to all H3CR Note: The undermentioned is common for all H3CR models. Basic Setting Setting of Selectors The s can be turned clockwise and counterclockwise to select the desired time unit, time range,

More information

Timers. GT3W Series Dual Time Range Timers. 250V AC/150V DC Time Range. 1: 0.1sec to 6 hours, 3: 0.1sec to 300 hours

Timers. GT3W Series Dual Time Range Timers. 250V AC/150V DC Time Range. 1: 0.1sec to 6 hours, 3: 0.1sec to 300 hours GT3W Key features: Sequential start, sequential interval, on-delay, recycler, and interval ON timing functions 2 time settings in one timer 8 selectable operation modes on each model Mountable in sockets

More information

The dual display means that the current value and the threshold value, it makes direct setting of threshold value

The dual display means that the current value and the threshold value, it makes direct setting of threshold value 735 Dual Display Digital Pressure Sensor DPC-L100 SERIES SERIES General terms and conditions... F-3 guide... P.699~ Related Information Glossary of terms... P.1563~ General precautions... P.1566 For Liquid

More information

Optimum sensing capability for LCD manufacturing

Optimum sensing capability for LCD manufacturing SENSORS FOR Glass Substrate Detection Sensor Amplifier-separated FX-301-F FT-F9 FD-F7 EX-F70/F60 HD-T1 M FD-L3 Reliable detection of glass substrates Its unique optical system enables detection of transparent

More information

Suitable for detecting transparent films or transparent bottles

Suitable for detecting transparent films or transparent bottles Ultrasonic Sensor Suitable for detecting transparent films or transparent bottles Reliable detection of transparent objects The sensor reliably detects transparent films or transparent objects. Only 16

More information

Solid-state Timer. Ordering Information. Specifications. Miniature Timer Compatible with the MY Relay. Accessories. Time Ranges

Solid-state Timer. Ordering Information. Specifications. Miniature Timer Compatible with the MY Relay. Accessories. Time Ranges Solid-state Timer Miniature Timer Compatible with the MY Relay Large transparent time-setting knob facilitates time setting. Flat-blade and Phillips screwdrivers can also be used for time setting. Approved

More information

Timers NEW DESIGN! RTE Series. RTE Series Analog Timers

Timers NEW DESIGN! RTE Series. RTE Series Analog Timers RE Series imers RE Series Analog imers NEW DESIN! Key features of the RE series include: 0 time ranges and 0 timing functions ime delays up to 600 hours Space-saving package High repeat accuracy of ± 0.%

More information

D2VW. Sealed Miniature Basic Switch. Ordering Information Model Number Legend D2VW- -

D2VW. Sealed Miniature Basic Switch. Ordering Information Model Number Legend D2VW- - Sealed Miniature Basic Switch Sealed Miniature Basic Switch Conforms to IP67 (Molded Lead Wire Type Only) Use of epoxy resin assures stable sealing, making this switch ideal for places subject to water

More information