Mini-Universal MATE-N-LOK Connectors
|
|
- Beverly Carroll
- 6 years ago
- Views:
Transcription
1 MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used on the power supply wiring Fully polarized to provide proper plug-to-cap mating incorporating a positive locking mechanism to help prevent accidental disengagement of mated connectors. lso facilitates panel mounting Free-hanging or panel mount Housings available in 1, 2, 3, 4, 6, 9, 12 and 15 circuit configuration for wire-towire connection can be mounted to [ ] thick panels Printed circuit board pin headers are available in 2 thru 24 circuit vertical and right-angle configurations Hermaphroditic housings available in 2, 3 and 4 circuits for free-hanging applications Low insertion/extraction forces Contacts accept wire size range WG [ mm2] Test probe contacts available centerline spacing Not for interrupting current Recognized under the Component R Program of Underwriters Laboratories Inc., File No. E28476 Certified by Canadian Standards ssociation, R File No. LR 7189 Performance Characteristics The Mini-Universal MTE-N-LOK Connector performance characteristics found on pages are based on free-hanging and panel mount connectors, loaded with contacts crimped on stranded wire. Low Level Termination Resistance 20 milliohms max. total resistance between wire crimps of a mated pin and socket Dielectric Withstanding Voltage 1.5 KVC between adjacent circuits Insulation Resistance 1000 megohms minimum between adjacent circuits Voltage Rating600 V C or DC Contact Retention8 lb. min. per contact Durability20 cycles, mating and unmating Technical Documents Mini-Universal MTE-N-LOK Mini-Universal MTE-N-LOK Mini-Universal MTE-N-LOK (UL94V-2) Mini-Universal MTE-N-LOK (UL94V-0) pplication Specification Mini-Universal MTE-N-LOK Instruction Sheets Mini-Universal MTE-N-LOK Mini-Universal MTE-N-LOK Mini-Universal MTE-N-LOK Centerline Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:
2 MP Mini-Universal MTE-N-LOK (Continued) Mini-Universal MTE-N-LOK Centerline Performance Characteristics (Continued) Maximum CurrentMaximum current rating of Mini-Universal MTE-N-LOK connectors is limited by the maximum operating temperature of the housings which is 105 C including the temperature rise of the contacts which is a maximum of 30 C. There are several variables which have a direct effect on this maximum current-carrying capability for a given connector and must be considered for each application. These variables are: Wire SizeLarger diameter wire will carry more current since it has less internal resistance to current flow and thus generates less heat. Longer wire lengths also enhance current-carrying capabilities since the wire conducts heat away from the connector. Connector SizeIn general, the more circuits in a connector, the less current can be carried. mbient TemperatureThe higher the ambient temperature, the less current can be carried in any given connector. Printed Wiring Board Conductor SizeThe finished trace conductor width and thickness should be maximized to allow for the greatest currentcarrying capacity and heat dissipation. Mini-Universal MTE-N-LOK connectors also will withstand the following tests: Housing Panel Retention 26 lb. min. Housing Lock Strength9 lb. min. Thermal Shock 55 C to +105 C Temperature-Humidity Cycling 25 C to 65 C at 95 RH Vibration cycles per minute at.06 inch total excursion Physical Shock18 drops, 50 G half-sine at 11 milliseconds Current Rating Verification for 30 C Maximum Temperature Rise 100% Energized Wire-to-Wire Mini-Universal MTE-N-LOK Calculated Current Table Number of Wire WG Circuits Values are based on initial Temperature Rise versus Current Testing and are intended to be a guide in the selection of a connector family. ll applications should be tested by the end user. The values listed are per circuit, for fully loaded housings being 100% energized. Note: ll combinations above were not tested and this chart contains interpolated and extrapolated values. Minimum Wire Lengths for T-Rise vs. Current Testing WG Min. Length (in.) WG Min. Length (in.) Note: If wire lengths used are less than those listed above, the currentcarrying ability of the system will be reduced due to less heat being conducted away from the connector. The customer should fully test all applications. Wire-to-Board Due to the vast differences in trace geometry and printed circuit board configurations, we are unable to provide a separate current carrying chart for our printed circuit board header products. However, the above Wire-to-Wire charts may be used as a guideline for headers if the trace width and thickness is equal to the listed wire gauge. For vertical headers, only 95% of the Wire-to-Wire value should be used. For right-angle headers, only 75% of the Wire-to-Wire value should be used. The chart values are only a tool for connector selection and will require the customer to fully test their application. Termination Resistance/Contact Crimp Tensile Force Termination Contact Resistance Crimp Wire Size Tensile Force WG mm 2 Test Resistance Current Milliohms Force (Min.) (mps) (Max. Init.) lbs. N Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:
3 MP Mini-Universal MTE-N-LOK (Continued) Mini-Universal MTE-N-LOK Connector Mating Combinations Connector Part Number Mating Connector Part Number PC Board Pin Number Flammability Style Housing Cap 1 Housing Vertical Right-ngle of Rating Part No. Part No. Plating Circuits With Without Blindmate With Drain Holes Drain Holes Board Lock UL94V-2 In-Line Tin UL94V-0 In-Line Duplex UL94V-2 In-Line UL94V-0 In-Line Tin Duplex ,7 Tin/Duplex UL94V-2 In-Line Tin Duplex UL94V-0 In-Line Tin Duplex UL94V-2 Dual Row Tin UL94V-0 Dual Row Duplex ,7 Tin/Duplex UL94V-2 Dual Row Tin UL94V-0 Dual Row Duplex ,7 Tin/Duplex Tin UL94V-0 Dual Row Duplex ,7 Tin/Duplex UL94V-2 Matrix Tin UL94V-0 Matrix Duplex Tin UL94V-0 Dual Row Duplex ,7 Tin/Duplex UL94V-2 Matrix Tin Matrix Duplex UL94V-0 Tin Dual Row Duplex UL94V-0 Dual Row Tin Duplex UL94V-2 Matrix Tin UL94V-0 Matrix Duplex UL94V-0 Dual Row Tin Duplex UL94V-0 Dual Row Tin Duplex UL94V-0 Dual Row Tin Duplex UL94V-0 Dual Row Tin Duplex UL94V-0 Dual Row Tin Duplex Mini-Universal MTE-N-LOK plug and cap housings accept pin or socket contacts. Use the appropriate contacts in the plug housing as required by the mating connector. ll s are free-hanging and Caps are free-hanging or panel mount, unless otherwise noted. 2Panel mount only. 3Hermaphroditic: Mates to itself. 4Free-hanging only. 5Duplex Finish Plated with [ ] min. gold in mating area and matte tin on solder tail end over [.00127] min. nickel underplate on entire contact. 6Tin Finish Plated with [.00381] min. tin over [.00127] min. nickel underplate on entire contact. 7For Splash-Proof Sealing. Note: ll part numbers are RoHS Compliant. Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK: Mini-Universal MTE-N-LOK Centerline
4 MP Mini-Universal MTE-N-LOK (Continued) Contacts Pin diameter.039 [0.99].6712 [17.04].6592 [16.74] Mini-Universal MTE-N-LOK Centerline Material Brass or Phosphor bronze Stock Thickness.008 [0.20] These contacts are to be used in Mini- Universal MTE-N-LOK or Cap housings only Mini-Universal MTE-N-LOK Mini-Universal MTE-N-LOK pplication Specification Mini-Universal MTE-N-LOK Performance Characteristics pages Housings pages pplication Tooling pages Keying Pin Socket Contact Part Numbers Wire Size Ins. Material Pin Socket HDM Hand Range Range and Finish pplicator Tool WG [mm2] Strip Loose Strip Loose Part No. Part No. Form Pieces Form Pieces Brass, Pre-tin Phos. Brz., Pre-tin [ ] Brass, Duplex Phos. Brz., Duplex Brass, Pre-tin Phos. Brz., Pre-tin [ ] Brass, Duplex Phos. Brz., Duplex Brass, Pre-tin [.3 -.8] or or Phos. Brz., Pre-tin x (2).067 x (2) Brass, Duplex [.3] 3.38 Phos. Brz., Duplex Brass, Pre-tin [.5-1.2] Phos. Brz., Pre-tin or or 20 x (2).075 x (2) Brass, Duplex [.5] 1.91 Phos. Brz., Duplex Duplex Finish Plated with [ ] min. gold in mating area and [.00254] min. tin in crimping area over [.00127] min. nickel underplate on entire contact [17.04] and.659 [16.74] dimensions are.689 [17.50] for indicated part numbers. 3 HDM pplicator part number ending in -1 is used on MPOMTOR CLS Machine with T or G Terminators, -2 is used on MP-O-LECTRIC Model K Machine, -3 is used on MP-O-ELECTRIC Model G Machine. See pages for further information. 4 HDM pplicator part number ending in -3 is used on MPOMTOR CLS Machine with T or G Terminators, -4 is used on MP-O-LECTRIC Model K Machine, -5 is used on MP-O-LECTRIC Model G Machine. See pages for further information. Note: ll part numbers are RoHS Compliant. Material UL94V-0 Nylon, white color Test Probe Contact Material and Finish Phosphor bronze, nickel plated [2.55] Part Number [35.00] Part Number Notes: 1. The test probe is inserted into the housing in the same direction as indicated by the arrow shown to the right. 2. The test probe can be used in the Cap or Housing. 3. Test probes are supplied unassembled. 86 Contact Extraction Tool No IS Contact Insertion Tool (For inserting contacts applied to small diameter wire) No IS Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:
5 MP Mini-Universal MTE-N-LOK (Continued) Housings Free-Hanging or Panel Mount Centerline spacing Mini-Universal MTE-N-LOK Mini-Universal MTE-N-LOK Mini-Universal MTE-N-LOK (UL94V-2) Mini-Universal MTE-N-LOK (UL94V-0) Performance Characteristics pages Contacts page 86 Keying page 86 Test Probe Contact page 86 Panel Cutout Recommendations page 89 Mating pages Circuit, Free-Hanging.272 [6.91] 2 and 3 Circuit, In-Line B [2.37].110 [2.79].110 [2.79] [.559].110 [.279] [2.79] [.414].110 [2.79].110 [2.79].110 [2.79] Cap Cap (Free-Hanging).110 [2.79] Cap (Panel Mount) C D.323 [8.20] Housing Part Numbers 1 Number Dimensions UL94V-0 Nylon, White Color UL94V-2 Nylon, Natural Color of Circuits B C D Cap Cap Panel Mount Free-Hanging Panel Mount Free-Hanging Mini-Universal MTE-N-LOK Centerline Note: ll part numbers are RoHS Compliant. 4 and 6 Circuit, Dual Row.386 [9.80].386 [9.80].465 [11.81].465 [11.81] Cap Number of Circuits 4 6 Dim Housing Part Numbers1 UL94V-0 Nylon, White Color UL94V-2 Nylon, Natural Color Cap Cap Housing part numbers shown in both charts (above) are also available in other colors: Red, Green, Blue, Black. To order connectors in these colors use the appropriate dash numbers as follows: Red 1-XXXXXX-2, Green 1-XXXXXX-5, Blue 1-XXXXXX-6, Black 1-XXXXXX-9 Note: ll part numbers are RoHS Compliant. Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:
6 MP Mini-Universal MTE-N-LOK (Continued) Housings Centerline spacing 9, 12 and 15 Circuit, Free-Hanging or Panel Mount, Matrix Mini-Universal MTE-N-LOK Centerline Mini-Universal MTE-N-LOK Mini-Universal MTE-N-LOK Mini-Universal MTE-N-LOK (UL94V-2) Mini-Universal MTE-N-LOK (UL94V-0) Performance Characteristics pages Contacts page 86 Keying page 86 Test Probe Contact page 86 Panel Cutout Recommendations page 89 Mating pages [16.0] Number of Circuits [23.69] Dim Cap Housing Part Numbers1 UL94V-0 Nylon, White Color UL94V-2 Nylon, Natural Color Cap Cap Housing part numbers shown in chart are also available in other colors: Red, Green, Blue, Black. To order connectors in these colors use the appropriate dash numbers as follows: Red 1-XXXXXX-2, Green 1-XXXXXX-5, Blue 1-XXXXXX-6, Black 1-XXXXXX-9 Note: ll part numbers are RoHS Compliant. 8 thru 24 Circuit, Free-Hanging, Dual Row.551 [13.99] [23.69].551 [13.99].630 [16.00].598 [15.19] Number Part Number of UL94V-0 Nylon, White Color Circuits Dim Note: ll part numbers are RoHS Compliant. 88 Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:
7 MP Mini-Universal MTE-N-LOK (Continued) Housings Hermaphroditic Free-Hanging 2, 3 and 4 Circuit Mini-Universal MTE-N-LOK Mini-Universal MTE-N-LOK Mini-Universal MTE-N-LOK (UL94V-2) Mini-Universal MTE-N-LOK (UL94V-0) Performance Characteristics pages Contacts page 86 Cap Housings pages [9.80].992 [25.19].228 [5.8].661 [16.79].551 [14.0].323 [8.20].992 [25.19].228 [5.8].504 [12.8].551 [10.40].598 [15.19].992 [25.19].323 [8.20].276 [7.01] Number Part Numbers of UL94V-2 Nylon, UL94V-0 Nylon, Circuits Natural Color White Color Note: Housing mates to itself; 2 required per wire-to-wire connection. Note: ll part numbers are RoHS Compliant..228 [5.8].827 [21.0].299 [7.59].598 [15.2] Mini-Universal MTE-N-LOK Centerline Recommended Cap Housing Panel Cutouts View is from cap entry side Recommended Panel Thickness [ ].132 [3.35] B C.211 [5.35].063 [1.60] D Number Dimensions of Circuits B C D Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:
8 MP Mini-Universal MTE-N-LOK (Continued) Mini-Universal MTE-N-LOK Centerline Vertical PC Board Pin Centerline spacing Material Housing Nylon, white Flammability Rating UL94V-0 Contacts Brass Solder tail diameter.039 [1.00] Mini-Universal MTE-N-LOK Mini-Universal MTE-N-LOK Mini-Universal MTE-N-LOK (UL94V-2) Mini-Universal MTE-N-LOK (UL94V-0) Performance Characteristics pages Recommended PC Board Hole Layouts page 93 Mating Mini-Universal MTE-N-LOK Housings pages Mini-Universal MTE-N-LOK 2 Housings pages and 3 Circuit, In-Line [5.58].531 [13.49] 9, 12 and 15 Circuit, Matrix.550 [13.97].531 [13.49] [4.44] [0.76].387 [9.83] [.76] [4.44].387 [9.83] 4, 6, 8, 10 and 12 Circuit, Dual Row.531 [13.49] 14, 16, 18, 20, 22 and 24 Circuit, Dual Row [.76] [4.44] Mates with Housing Number of Style Pin Vertical Pin Header Part Numbers Part Number Circuits Dim. Finish With Without (Using Socket Contact) Drain Holes Drain Holes Mini-Universal Mini-Universal MTE-N-LOK MTE-N-LOK 2 2 In-Line.387 Tin Duplex In-Line.550 Tin Duplex Dual Row.387 Tin Duplex Dual Row.550 Tin Duplex Dual Row.713 Tin Duplex Matrix.551 Tin Duplex Dual Row.877 Tin Duplex Dual Row Tin Duplex Matrix.713 Tin Duplex Dual Row Tin Duplex Matrix.877 Tin Duplex Dual Row Tin Duplex Dual Row Tin Duplex Dual Row Tin Duplex Dual Row Tin Duplex Dual Row Tin Duplex [13.49] [.762] [.76] [4.44] [4.44] 1 Tin FinishPlated with [.00381] min. tin over [.00127] min. nickel underplate on entire contact. 2 Duplex FinishPlated with [ ] min. gold in mating area and matte tin on solder tail end over [.00127] min. nickel underplate on entire contact. Note: ll part numbers are RoHS Compliant. 90 Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:
9 MP Mini-Universal MTE-N-LOK (Continued) Vertical PC Board Blindmate Pin Centerline spacing Material Housing Nylon, white Flammability Rating UL94V-0 Contacts Brass Solder tail diameter.039 [1.00] 4, 6, 8 and 10 Circuit, Dual Row.645 [16.38].640 [16.26] [0.76].215 [5.46] Mini-Universal MTE-N-LOK Mini-Universal MTE-N-LOK 2 Performance Characteristics pages Recommended PC Board Hole Layouts page 93 Mating Mini-Universal MTE-N-LOK Housings pages Mini-Universal MTE-N-LOK 2 Housings pages , 12 and 15 Circuit, Matrix Number of Pin Pin Header Part Numbers Circuits Style Dim. Finish With Drain Holes 4 Dual Row 6 Dual Row 8 Dual Row 9 Matrix.645 Tin Duplex Tin Duplex Tin Duplex Tin Duplex [20.52].640 [16.26] [0.76].215 [5.46] Mates with Housing Part Number (Using Socket Contacts) Mini-Universal Mini-Universal MTE-N-LOK MTE-N-LOK Mini-Universal MTE-N-LOK Centerline 10 Dual Row Tin Duplex Matrix 15 Matrix.971 Tin Duplex Tin Duplex Tin Finish Plated with [.00381] min. tin over [.00127] min. nickel underplate on entire contact. 2 Duplex Finish Plated with [ ] min. gold in mating area and matte tin on solder tail end over [.00127] min. nickel underplate on entire contact. Note: ll part numbers are RoHS Compliant. Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:
10 MP Mini-Universal MTE-N-LOK (Continued) Mini-Universal MTE-N-LOK Centerline Right-ngle PC Board Pin Centerline spacing Material Housing Nylon, white color Flammability Rating UL94V-0 Contacts Brass Solder tail diameter.039 [1.00] Product Specification Mini-Universal MTE-N-LOK 2 Performance Characteristics pages Recommended PC Board Hole Layouts page 93 Mating Mini-Universal MTE-N-LOK Housings pages Mini-Universal MTE-N-LOK 2 Housings pages With Board Lock Feature 1, 2 and 3 Circuit, In-Line 4, 6, 8, 10 and 12 Circuit, Dual Row.145 [3.68].500 [12.70].270 [6.86] [0.76].236 [5.99].500 [12.70].145 [3.68].270 [6.86] [0.76].236 [5.99].225 [5.72].500 [12.70].145 [3.68].270 [6.86] 14, 16, 18, 20, 22 and 24 Circuit, Dual Row Number of Pin Circuits Style Dim. Finish Pin Header Part Number With Board Lock Tin Duplex In-Line.388 Tin Duplex In-Line.551 Tin Duplex Dual Row.388 Tin Duplex Dual Row.551 Tin Duplex Dual Row.714 Tin Duplex Dual Row.877 Tin Duplex Dual Row Tin Duplex Dual Row Tin Duplex Dual Row Tin Duplex Dual Row Tin Duplex Dual Row Tin Duplex Dual Row Tin Duplex Dual Row Tin Duplex [9.80] [0.76].236 [5.99].386 [9.80] Mates with Housing Part Number (Using Socket Contacts) Mini-Universal Mini-Universal MTE-N-LOK MTE-N-LOK Tin Finish Plated with [.00381] min. tin over [.00127] min. nickel underplate on entire contact. 2Duplex Finish Plated with [ ] min. gold in mating area and matte tin on solder tail end over [.00127] min. nickel underplate on entire contact. Note: ll part numbers are RoHS Compliant. 92 Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:
11 MP Mini-Universal MTE-N-LOK (Continued) Recommended PC Board Hole Layouts for Vertical and Blindmate.062 [1.57] thick board, tolerances non-accumulative Vertical pages and 3 Circuit, In-Line.055 [1.40] [4.44].125 [3.18] 4, 6, 8, 10 and 12 Circuit, Dual Row [4.44].055 [1.40].125 [3.18] 9, 12 and 15 Circuit, Matrix.055 [1.40] [4.44].125 [3.18] 14, 16, 18, 20, 22 and 24 Circuit, Dual Row.055 ±.003 [1.40 ±.076] [4.45] [4.45] Recommended PC Board Hole Layouts for Right- ngle.062 [1.57] thick board, tolerances non-accumulative Right-ngle page [3.86].289 [3.86] [3.18] 2 Plcs [2.070] 2 Plc..055 [1.40] 2 Plc..289 [3.86] 1 Circuit 2 Circuit, In-Line 3 Circuit, In-Line.055 [1.40] [1.40] 3 Plc..209 Mini-Universal MTE-N-LOK Centerline 4, 8 and 12 Circuit, Dual Row 6 and 10 Circuit, Dual Row 14 and 18 Circuit, Dual Row [2.070] 4 Plc. [3.86].055 [1.40] [3.86].055 [1.40] [1.40].289 [3.86] 2 Plc..326 [8.28] 2 Plc Circuit, Dual Row 16, 20 and 24 Circuit, Dual Row [1.40] [2.070] 4 Plc..055 [1.40] [3.86] 2 Plc..489 [12.42] 2 Plc..209 [3.86] 2 Plc..407 [10.35] 2 Plc..209 Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:
12 MP Mini-Universal MTE-N-LOK (Continued) Strain Reliefs for or Cap Housings 6 and 8 Circuit or Cap housing Mini-Universal MTE-N-LOK Centerline Housings pages These Strain Reliefs may also be used with MP-DUC Receptacle housings on page 126. Locking Tab Style Dual Row 9 Circuit Break off plastic connecting Locking Tab to Strain Relief Strain Relief Step 1 Step 2 Close and Lock Strain Relief around housing. Insert Locking Tab to firmly secure wires. Number of Wire Bundle Part Numbers Circuits Dim. Range UL94V-0 Nylon, White Color Use With PLC 2.8 2PLC Style Number of Part Numbers Circuits Part Number Use With Matrix 9 Cap Note: ll part numbers are RoHS Compliant. 94 Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:
13 MP Product Facts Sealed Connector System Splash-proof design allows use in areas where high humidity, intermittent liquid splashing or foam-in applications require a sealed connector for improved electrical performance Wire-to-wire and wire-to-board Dual row, 2 to 10 positions (even only) and 16 positions Mates with all standard Mini-Universal MTE-N-LOK connector housings and pin headers (except Blindmate) Positive, polarized keyed and latched orientation to ease application Utilizes proven Mini- Universal MTE-N-LOK contacts with existing application tooling Tested to Sealing Level of IP56 and IP57 per IEC Primarily used in ppliance, Vending and HVC applications Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used on the power supply wiring Fully polarized to provide proper plug-to-cap mating incorporating a positive locking mechanism to help prevent accidental disengagement of mated connectors. lso facilitates panel mounting Free-hanging or panel mount can be mounted to [ ] thick panels With seals, contacts accept wire size range WG [ mm2] with insulation diameter of [ ] centerline spacing Not for interrupting current Mini-Universal MTE-N-LOK Sealed Connector System Performance Characteristics The Mini-Universal MTE-N-LOK Connector performance characteristics found on pages are based on free-hanging and panel mount connectors, loaded with contacts crimped on stranded wire. Low Level Termination Resistance 20 milliohms max. total resistance between wire crimps of a mated pin and socket Dielectric Withstanding Voltage 1.5 KVC between adjacent circuits Insulation Resistance 1000 megohms minimum between adjacent circuits Voltage Rating600 V C or DC Contact Retention8 lb. min. per contact Durability20 cycles, mating and unmating Technical Documents Mini-Universal MTE-N-LOK Splash-Proof Seals Mini-Universal MTE-N- LOK Mini-Universal MTE-N- LOK pplication Specification Mini-Universal MTE-N-LOK Sealed Connector Instruction Sheets Mini-Universal MTE-N-LOK Mini-Universal MTE-N-LOK Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK: Mini-Universal MTE-N-LOK Sealed Connector System Centerline
14 MP Mini-Universal MTE-N-LOK Sealed Connector System (Continued) Part Number (2 position shown).320 [8.13].486 [12.34].599 [15.22].386 [9.80] Mini-Universal MTE-N-LOK Sealed Connector System Centerline Cap Part Number (2 position shown) Individual Wire Seals Single Housing Cavity Seal Part Number [2.6] [1.50 ± [7.4 ± 0.1].386 [9.80] [3.0 ± 0.1].102 [2.6] [4.1 ± 0.1] Single Wire Seal Part Number [2.6] ±.004 ± [0.1].291 ±.004 [7.4 ± 0.1].06 ±.002 [1.50 ± 0.05].472 [11.99].157 ±.004 [4 ± 0.1] Number of Interface Cap Vertical Right ngle Positions Seals for Sealing for Sealing for Sealing for Sealing X X X X X X X X X X X X -0 for tin finish, -1 for duplex. See Mini-Universal MTE-N-LOK section for details Interface Seals ± 0.10 ± 0.10 [9.68 ± 0.25] ± ± [7.47 ± ± 0.25] 0.25] Individual Wire Seal Contacts Contact Part Numbers (for use with Single Wire Seals) Wire Size Ins. Material Pin Socket HDM Hand Range pplicator Tool WG [mm 2 Range and Finish ] Strip Loose Strip Loose Part No. Part No. Form Piece Form Piece [ ] [.3 -.8] Brass, Pre-tin Brass, Duplex Brass, Pre-tin Brass, Duplex Duplex Finish Plated with [ ] min. gold in mating area and [.00254] min. tin in crimping area over [.00127] min. nickel underplate on entire contact. 2 HDM pplicator part number ending in -1 is used on MPOMTOR CLS Machine with T or G Terminators, -2 is used on MP-O-LECTRIC Model K Machine, -3 is used on MP-O-ELECTRIC Model G Machine. See pages for further information. 3 HDM pplicator part number ending in -3 is used on MPOMTOR CLS Machine with T or G Terminators, -4 is used on MP-O-LECTRIC Model K Machine, -5 is used on MP-O-LECTRIC Model G Machine. See pages for further information. 96 Note: Ganged Wire Seals are available; contact Technical Support. Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:
15 MP Mini-Universal MTE-N-LOK (Continued) New: Mini Universal Gang Seals No Seal Crimping Required! Interface Seals ± 0.10 ± 0.10 [9.68 ± 0.25] ±.010 Dim [± 0.25].032 [0.8] Max Gang Wire Seal Contacts Dim B Number of Interface Gang Cap Positions Seals Wire Seal for Sealing for Sealing Vertical for Sealing* Right ngle for Sealing* X X X X X X X X X X X X *-0 for tin finish, -1 for duplex. See Mini-Universal MTE-N-LOK section for details.386 ±.010 [9.8 ± 0.25] ± ± [7.47 ± ± 0.25] 0.25] Wire Size Insulation Material Pin Socket Range Range Finish Strip Form Loose Piece Strip Form Loose Piece 16 WG Brass, Pre-tin Brass, Duplex WG Brass, Pre-tin Brass, Duplex WG Brass, Pre-tin Brass, Duplex Duplex Finish Plated with [ ] min. gold in mating area and [.00254] min. tin in crimping area over [.00127] min. nickel underplate on entire contact. Mini-Universal MTE-N-LOK Sealed Connector System Centerline Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:
Distributed by: www.jameco.com -800-8-44 The content and copyrights of the attached material are the property of its owner. Pin and Socket Mini-Universal MTE-N-LOK Product Facts Compact, durable housings
More informationMini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
More informationMini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
More informationMini-Universal MATE-N-LOK 2 Connectors
MP Mini-Universal MTE-N-LOK 2 Product Facts One molded piece, secondary locking plug and cap housing assemblies Three-point stabilization to provide better terminal position Fully polarized to provide
More information(MR) Miniature Rectangular Connectors (Continued)
Product Facts Housings positively lock to help prevent accidental disengagement Either cap or plug housing can be mounted in same rectangular panel cutout without additional hardware UL94V-0 housings Plug
More informationCommercial MATE-N-LOK Connectors
MP Commercial MTE-N-LOK Connectors Product Facts Fully polarized nylon housings Easy cavity identification Locking devices are integral part of design. Connector halves will hold together under severe
More informationElectrical Components Catalog Universal MATE-N-LOK Connector System
Introduction Product Facts Pins and sockets can be intermixed in the same housing Positive polarization Rear cavity identification Contacts completely enclosed in housings Positive locking housings Insulation
More informationUniversal MATE-N-LOK Connectors
Product Facts Pins and sockets can be intermixed in the same housing Positive polarisation Rear cavity identification Contacts completely enclosed in housings Positive locking housings Insulation capability
More information.093 Commercial Pin and Socket Connectors
Product Facts Polarised Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold plating Panel-mounting
More informationAMP Soft Shell Pin and Socket Connectors
Soft Shell Pin and Socket Connectors Restriction on the use of Hazardous Substances (RoHS) t Tyco Electronics, we re ready to support your RoHS requirements. We ve assessed more than 1.5 million end items/components
More informationMTA-156 IDC Quad Connectors
MT-156 IDC Quad Connectors MT-156 Product Facts Provides four points of contact Greater current carrying capability than Standard MT-156 Connectors Connector styles include both closed end and feedthru
More informationAMP Drawer Series Connectors Miniature Power Drawer (MPD) Connectors
Miniature Power Drawer (MPD) Connectors Product Facts High mating cycle life Low Mating and Un-mating force (< 0.2lbs per contact) Single-piece molded housing Molded-in guide pins provide generous blind-mateability
More informationUniversal MATE-N-LOK Headers for UMNL II Connectors
for UMNL II Connectors PC Board Vertical Pin Headers [6.5] Centerline spacing,, and 5 Circuit, In-Line Housing Nylon Flammability ating UL9V-0 Contacts Phosphor bronze Solder tail diameter.06 [1.57] elated
More informationAMPMODU System 50 Connectors
AMPMODU System 50 Connectors (Page 52) (Page 44) (Page 8) (Page 40) (Page 45) (Page 9) (Page 1) (Page 29) AMPMODU System 50 (Page 4) (Page 0) (Page ) (Page 50) Double Row,.025 Ribbon Cable Mount Receptacle
More informationFine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Stacking Height mm inch
(Parallel oard-to-oard) Stacking Height Guide for Parallel oard-to-oard pplications Fine Pitch SMT Stacking Connectors (Parallel oard-to-oard) Stacking Height Guide for Parallel oard-to-oard pplications
More informationIntroduction to High Current Card Edge Connectors
Introduction to High Current Card Edge Connectors Product Facts Contacts on.100 [2.54] Centerlines Selective gold plating of contacts for high performance at low cost Flow solder applications Glass-filled
More informationGLOW WIRE CONNECTORS Product Summary
Industry photo: should be a the same image as larger industry photo. Either a different crop or different angle. Human photo. Can be environmental/documentaty style or portrait of engineer. industry photo.
More informationDUBOX SHUNTS BOARD/WIRE-TO-BOARD CONNECTORS FEATURES & BENEFITS. Dual-beam contacts for added reliability
BOARD/WIRE-TO-BOARD CONNECTORS DUBOX SHUNTS FEATURES & BENEFITS Dual-beam contacts for added reliability Slotted cutout in low profile housing simplifies electrical testing Side-by-side and end-to-end
More informationThe con ectors serve low durability cycle applications
Power Connectors & Interconnection Systems Introduction to High Current Card Edge Connectors Product Facts Contacts on.100 [2.54] Centerlines Selective gold plating of contacts for high performance at
More informationAMPMODU Interconnection System
AMPMODU Interconnection System PC/104 and PC/104- Plus Connectors.00 x.00 [1.27 x 1.27] Centerline.00 x [1.27 x 2.4] Centerline AMPMODU 2mm Connectors x [2.4 x 2.4] Centerline.12 x.12 [3.18 x 3.18] Centerline.16
More informationPRODUCT SPECIFICATION
1.0 SCOPE This Product Specification covers the 3.00 mm (.118 inch) centerline (pitch) square pin headers when mated with either printed circuit board (PCB) connector or connectors terminated with 20 to
More informationRECTANGULAR POWER CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved TE CONNECTIVITY (TE) 08P MTA156 CONN ASSY 3-643818-8 TE Internal Number: 3-643818-8 Product Type
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Power Connectors FEATURES AND SPECIFICATIONS Features and Benefits Positive
More informationPRODUCT SPECIFICATION
SINGLE ROW CONNECTOR SYSTEM 1.0 SCOPE This Product Specification covers the 3.00 mm (.118 inch) centerline (pitch) square pin headers when mated with either printed circuit board (PCB) connector or connectors
More informationRX CONNECTOR. Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.54mm
RX CONNECOR mm Disconnectable Insulation displacement connectors for.27mm pitch ribbon cables pitch Features Conforms to MIL Standards s RX connectors conform to MIL standards (MIL-C-833) and are compatible
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. 3.0, BMI Wire-to-Wire BMI Connector System Americas Headquarters isle, Illinois
More informationUltra-small Rack/Panel Crimp Connectors
All non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
More informationRIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) A/L UNIV HDR 14P VERT AMP-LATCH Universal
More informationMetrimate Pin and Socket Connectors. Table of Contents
Product Facts Recognized under the Component Program of U n d e rwriters Laboratories Inc., File No. E28476 Certified by Canadian Standards Association, File No. LR7189 Tested to VDE requirements outlined
More information343
.050" IDC CONNECTORS DUL ROW SOCKETs & Transition Plugs HFCS & HFDP SERIES Introduction: dam Tech.050" IDC Sockets and Transition Plugs are low profile, precision designed flat cable connectors that feature
More informationBOARD/WIRE-TO-BOARD CONNECTORS MINITEK UNSHROUDED VERTICAL HEADERS
BOARD/WIRE-TO-BOARD CONNECTORS MINITEK UNSHROUDED VERTICAL HEADERS MINITEK UNSHROUDED VERTICAL HEADERS TECHNICAL INFORMATION MATERIALS Housing: High temperature, black thermoplastic Flammability rating:
More informationSSL 1.1 Series. Product Data Sheet REV. 4, 2014 JUN
SSL 1.1 Series Product Data Sheet REV. 4, 2014 JUN General Specification Number of Positions Current Rating 2, 4, 6P 3A (Max) Voltage Rating Dielectric Withstand Voltage Durability Color Operating Temperature
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. C 2.54mm (.100") Pitch FEATURES AND SPECIFICATIONS Features and Benefits
More informationCMC Hybrid Connectors Standard and Power Versions
The Molex family of provides a sealed, high-density, modular and cost-effective connection system for heavy-duty, powertrain and body-electronics applications in the transportation industry The CMC connector
More information.050" IDC Connectors for.025" Ribbon Cable - M73 Series
.050" IDC Connectors for.025" Ribbon Cable - M73 Series PRT NUMER LEGEND M73X-XXXX-XX STYLE 01 = Low profile.050" IDC Socket for single layer.025" Flat Cable 02 = Standard profile IDC Socket for single
More informationAMPMODU Interconnection System
AMPMODU Interconnection System PC/104 and PC/104- Plus Connectors x [1.7 x 1.7] x [1.7 x.54] AMPMODU mm Connectors x [.54 x.54].15 x.15 [3.18 x 3.18].156 [3.96] 1 3 4 5 6 7 Disclaimer While Tyco Electronics
More informationRIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) IDC LOW PRO HDR 30P VERT LG LA AMP-LATCH
More informationQUICKIE SHROUDED HEADERS LOW PROFILE
BOARD/WIRE-TO-BOARD CONNECTORS QUICKIE SHROUDED HEADERS LOW PROFILE FEATURES & BENEFITS Recessed pins assure proper alignment and eliminate damage during mating End windows for latching with IDC receptacle
More information(Smallest Circuit) Current Rating. (Largest Circuit) Housing Lock. Current Rating. 12A 11A Positive or None
General Overview The Jr. was specifically developed for positive locking, wire-to-wire and wire-to-board applications. It is available in single row and dual row versions. The system offers the widest
More informationPRODUCT SPECIFICATION. This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors.
s-12-1177*1.0 SCOPE 1 of 8 D This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors. 2.0 APPLICABLE DOCUMENTS The following documents, of
More information1Certified LR R Inner-housing lock. Outer-housing lock
.mm pitch/disconnectable Crimp style connectors (Combined use for both wire-to-board and wire-to-wire connections) a 0 This VL connector is designed for wire-towire and wire-to-board. mm pitch connector
More informationCROWN CLIP Series Sockets
OWN LIP Series Sockets Product Facts ompact design High performance OWN BND contacts urrents to 350 mps 1 Mates with solid or laminated blades Supports true hot-plug (current interruption)2 Float-mount
More informationZH CONNECTOR. 1 Certified LR R Disconnectable Crimp style connectors. Features. Specifications. Standards. 1.5mm
Crimp mm (.059") pitch ZH CONNECTOR Disconnectable Crimp style connectors Emboss Tape Features Compact, low profile design The ZH connector requires only about 45% of the installation space required by
More informationDynamic Series Connectors
D-5000 Series Series profile The Dynamic 5000 series was developed for up to 5 amperes in response to the demand for improved reliability and productivity for the main power lines in equipment. They can
More informationFASTON Printed Circuit Board Tabs and Receptacles
FSTON Tabs and eceptacles Product Facts Full line of PC tabs and receptacles Straight and right-angle tabs available in 50, 87 and 0 series eceptacles produced in 50/05 x 03 or 05 Standard or low insertion
More informationCMC CP Terminals CP 0.635mm (.025 ) CP 1.50mm (.059 ) CP 2.80mm (.110 ) FEATURES AND SPECIFICATIONS
FEATURES AND SPECIFICATIONS CMC Connectors sealed, high-density, modular and cost-effective connection system for heavy-duty applications The CMC connector family from Molex is a sealed, high-density connection
More informationPower Connectors & Interconnection Systems
Product Facts Available in latch versions for VRMs up to 3 oz. Available with metal clip for VRMs over 3 oz. VRM connectors to support a wide variety of power supply standards Solder tail, press-fit and
More informationHigh Speed, Controlled Impedance Two-Piece Connectors (MICTOR, Micro-Strip and STEP-Z Interconnection Systems) Catalog Revised 8-04
High Speed, Controlled Impedance Two-Piece Connectors (MICTOR, Micro-Strip and STEP-Z s) Catalog 6594 Revised 8-04 High Speed Stacking Connectors (Parallel and Right-ngle Board-to-Board) Stacking Height
More informationRIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) 20 NOVO MIL/CTR 15DP,LEAD FREE 1658621-4
More information1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors
ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationCHAMP Interconnection System
CHAMP Interconnection System Flowchart of CHAMP Connectors: How This Catalog is Organized SECTION 1 SECTION 2 SECTION 3 SECTION 4 SECTION 5 SECTION 6 0.8mm 1.27mm 2.16mm Centerlines [.0315"] [.050"] [.085"]
More informationIntroduction. The information pages provide standard data common to all D-subminiature connectors. These include:
Connectors Information Introduction The D-subminiature is one of the most popular styles of connectors in the I/O category. It is used in computer, telecom, datacom, medical, and test instrumentation applications
More information1mm Pitch Double Rows Low Profile Wire-to-Board Connectors
mm Pitch Double Rows Low Profile Wire-to-Board Connectors DF series Features. Contact Pitch mm contact pitch allows reliable solder and cable termination.. Reliable electrical connection wipe Effective
More informationPRODUCT SPECIFICATION
1.0 SCOPE This Product Specification covers the 3.00 mm (.118 inch) centerline (pitch) square pin headers when mated with either printed circuit board (PCB) connector or connectors terminated with 20 to
More information1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors
ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationBOARD-TO-BOARD HEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS BOARD-TO-BOARD HEADERS & RECEPTACLES TE CONNECTIVITY (TE) MICTOR RECEPT ASSY, 38 POS.
More informationCatalog Revised Ribbon Cable Interconnect Solutions. Ribbon Cable Interconnect Solutions
Catalog 82012 Revised 10-09 Ribbon Cable Interconnect Solutions onents.com Ribbon Cable Interconnect Solutions Ribbon Cable Connector Selection Guide Ribbon Cable Connector Selection Guide Mates to.050"
More informationTX1/TX2/TX3 SERIES CONNECTORS
TX 1 to 3 Series connectors are two-piece PC connectors with 1.27mm (.050") contact spacing. They are designed for board-to-cable applications. Configurations include IDC sockets (TX1 and TX2) for flat
More information2mm Pitch Miniature Connector for HDD
2mm Pitch Miniature Connector for HDD A3E Series Product Specifications Rating type without polarizing guide type with polarizing guide Features 1. Variation in Number of Contacts This connector can be
More informationUSB & IEEE 1394 FIREWIRE
USB & IEEE 1394 FIREWIRE UNIVERSAL SERIAL BUS & IEEE 1394 FIREWIRE INTRODUCTION: Adam Tech USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable,
More informationProduct Details
My Cart My Part Lists Sign In/Register English (Change) Have a Question? Chat with a Product Information Specialist What can we help you find? Products Industries Resources About TE My Account Innovation
More informationEXTreme Guardian Power Connector System
Exceed high-current and reliability requirements in topend server and high-power applications with Molex s compact,, providing EMI/RFI shielding, overmolding and discretewire options for design flexibility
More informationMinitek Pwr 3.0/Minitek Pwr 4.2 Customer Presentation
Minitek Pwr 3.0/Minitek Pwr 4.2 Customer Presentation Apr 2014 FCI Minitek Pwr 4.2 and 3.0 Overview Communication 2 Typical Server Storage Application Need Signal and Power pin to control and drive HDD
More informationSM CONNECTOR. 1Certified LR R Disconnectable Crimp style wire-to-wire connectors. Features. Specifications. Standards. 2.
Crimp.mm (.") pitch SM CONNECTOR Disconnectable Crimp style wire-to-wire connectors Features High contact pressure With each insertion and withdrawal, the mating contacts wipe against each other to remove
More information7.92 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
NEW 7.9 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) DF Series Complete Locking Function Completely enclosed locking system Protection from shorts circuits
More information8Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Subminiature Series Connectors 109 (Continued) Introduction Product Facts Military qualified connectors conform to the latest amendments of MIL-DTL-24308 Industrial versions available
More informationBOARD-TO-BOARD HEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS BOARD-TO-BOARD HEADERS & RECEPTACLES TE CONNECTIVITY (TE) MICT,REC,038,ASY,.025,TAPE,CAP
More informationProduct Details
My Cart My Part Lists Sign In/Register English (Change) Have a Question? Chat with a Product Information Specialist What can we help you find? Products Industries Resources About TE My Account Innovation
More information2.5mm pitch/disconnectable Crimp style connectors. 1Certified LR J
Emboss Tape.mm pitch/disconnectable Crimp style connectors Radial Tape JST 1 Specifications Current rating: 3 A AC, DC (AWG #) Voltage rating: 0 V AC, DC Temperature range: - C to +8 C (including temperature
More informationD-3100S Standard 1-Row Type
(Wire-to-Board, Wire-to-Panel and Wire-to-Wire) List of Products by Application Used for both signal circuit and power/power supply circuit applications. Able to carry 15A max. of current per position
More informationCZ FAMILY SERIES/CZ CZW CZH CZHW TZ TZW
CZ FAMILY SERIES/CZCZWCZHCZHWTZTZW 1.5mm pitch/disconnectable Insulation displacement connectors RPZ connector: Receptacle RPZ connector: Plug CZW connector: Header CZ connector: header CZ connector: TZ
More informationMinitek Pwr 4.2 BMI Product Presentation
BMI Product Presentation Basics Portfolio BMI Agenda Value Proposition Product Overview Product Specifications Features & Benefits Part Numbers Stacking Height Matrix Markets & Applications Collaterals
More informationElcon CROWN EDGE Card Edge-style High Current Connectors
Elcon CROWN EDGE Card Edge-style High Current Connectors CROWN EDGE is a board-to-board power interconnect solution that uses Elcon high performance Crown contact technology configured to mate directly
More informationPwrMAX High Power Connector System (Preliminary)
1 of 14 5 1.0 OBJECTIVE 2.0 SCOPE This specification defines the performance, test, quality and reliability requirements of the PwrMAX Power Connector System. 3.0 GENERAL This specification is applicable
More information2.54mm Pitch Board to Board Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More information6.2mm pitch/disconnectable Crimp style connectors. 1Certified LR R <Inner-housing lock>
6.mm pitch/disconnectable Crimp style connectors a 0 This VL connector is designed for wire-towire and wire-to-board 6.mm pitch connector corresponding to large current. Secondary retainer, which prevents
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Mini-Fit, CPI Compliant Pin Interface Headers FEATURES AND SPECIFICATIONS
More informationStac64 Unsealed Connector System
Unsealed Connector System pplications To address the growing electronic device requirements within today s vehicles, Molex has developed a modular 0.64, 1.50 and 2.80mm (.025,.059 and.110") terminal header
More informationMinitek Pwr 3.0 BMI Product Presentation
Product Presentation Basics Portfolio Agenda Value Proposition Product Specifications Features & Benefits Part Numbers Markets & Applications Marcom Collaterals Product Presentation - 2 Value Proposition
More informationUSB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
More informationUSB, MINI USB, MICRO USB FIREwIRE & MINI FIREwIRE UNIVeRSAl SeRIAl BUS & Ieee 1394 FIRewIRe USB & FwC SeRIeS
introduction: Adam Tech USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available in a variety
More informationFLZ CONNECTOR. 1Certified LR Connectors for FFC and FPC. Features. Specifications. Standards. 0.5mm
0.5mm (.020") pitch FLZ CONNECTOR Connectors for FFC and FPC Emboss Tape Features Zero insertion force mechanism ZIF mechanism increases wear resistance and extends the connector's mating life. Heat resistant
More informationA KYOCERA GROUP COMPANY. ELCO Varicon Input/Output Rack and Panel Connectors
A KYOCERA GROUP COMPANY ELCO Varicon Input/Output Rack and Panel Connectors Contents The Varicon Range......................................................... 2 Introduction to Varicon.....................................................
More informationDubox Product Presentation
Product Presentation Basics Portfolio Agenda 1. Value Proposition 2. Product Overview 3. Product Specifications 4. Features & Benefits 5. Part Numbers 6. Markets & Applications 7. Marcomm Collaterals Product
More information1.27mm Pitch Two-Piece Connector
1.7mm Pitch Two-Piece Connector HIF6 Series Connector in combination with the HIF6 series connection type HIF3B Series (MIL-C-83503) HIF Series (Board direct mount type) HIF5 Series 1 (Card edge type)
More informationPRODUCT SPECIFICATION CUSTOM CONFIGURABLE MODULAR POWER DOCK CONNECTOR SYSTEM
1.0 SCOPE This Product Specification covers the custom configurable modular printed circuit board (PCB) Dock Connector System with gold plating. 2.0 PRODUCT DESCRIPTION 2.1 PRODUCT NAME AND SERIES NUMBER(S)
More informationSEPTEMBER C.CS.1000 / GB
SEPTEMBER 2005 - C.CS.1000 / GB C R I M P F L E X C O N N E C T O R S CRIMPFLEX connectors TECHNICAL DATA MATERIAL Phosphor bronze MALE SOLDER TAB PLATING The standard connector is tin plated (thickness
More informationElma Bustronic CompactPCI Reference Sheet
Elma Bustronic CompactPCI Reference Sheet Rev. 4 5.10.10 The cpci reference sheet provides relevant reference material for the CompactPCI product line. The information provided may change at anytime. Elma
More informationDDR4 DIMM Sockets, Halogen-free
Meeting JEDEC specifications, these high-speed sockets offer greater PCB real-estate and cost savings with excellent assembly processing compatibility Meeting JEDEC specifications, Molex s Vertical SMT
More informationAMP Circular Connectors for Commercial Signal & Power Applications. RoHS. Ready
MP Circular Connectors for Commercial Signal & Power pplications RoHS Ready Introduction 2 Product Facts Lightweight, all-plastic and metal-shell connectors connectors are UL 94V-0 rated and made of stabilized,
More informationUSB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
More informationEL CONNECTOR. Disconnectable Crimp style wire-to-wire connectors. Features. Specifications. 4.5mm
Crimp.mm (.") pitch EL CONNECTOR Disconnectable Crimp style wire-to-wire connectors The contacts for the compact EL connector can be easily inserted into the connector housings. The plug housing and the
More information1.27mm Pitch Two-Piece Connectors
1.7mm Pitch Two-Piece Connectors HIF6 Series Connector in combination with the HIF6 series connection type HIF3B Series (MIL-C-833) HIF Series (Board direct mount type) Features 1. Product Variation The
More informationUSB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
More information3M (TM) Ribbon Cable Socket and Header, 451 and 452 Series.050" x.050" (1.27 mm x 1.27 mm)
3M (TM) Ribbon Cable Socket and Header, 451 and 45 Series.050" x.050" (1.7 mm x 1.7 mm) Product Specification: 78-510-0091-4 Revised: 1-6-016 78-510-0091-4 Rev D of 9 Page Cover Page..... 1 Contents 1.
More information2mm Pitch Miniature Connector for HDD
2mm Pitch Miniature Connector for HDD A3E Series type without polarizing guide type with polarizing guide Features 1. Variation in Number of Contacts This connector can be chosen according to applications,
More informationBOARD-TO-BOARD HEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS BOARD-TO-BOARD HEADERS & RECEPTACLES TE CONNECTIVITY (TE) FB-5R,ASY,30,SIG,REC,SL,2.73
More informationPCI-SIG ENGINEERING CHANGE NOTICE
PCI-SIG ENGINEERING CHANGE NOTICE TITLE: Host Socket Recommendations DATE: Updated June 12, 2006 (Initial release April 10, 2006) AFFECTED DOCUMENT: PCI Express Mini Card, Half-Mini Card ECR (Content of
More informationMCX Connectors. Alphabetical Index. Johnson Components P.O. Box 1732 Waseca, MN Fax:
MCX Connectors Alphabetical Index 133-3701-201 3 133-3701-206 3 133-3701-211 3 133-3701-216 3 133-3701-221 3 133-3701-226 3 133-3701-231 4 133-3701-236 4 133-3701-301 5 133-3701-306 5 133-3701-311 5 133-3701-316
More information2.54mm Pitch High Density Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More information