INDI BOY DSP Load limitation electronics
|
|
- Clarence Boyd
- 6 years ago
- Views:
Transcription
1 Change from one to two columns Data Sheet DS/INDI-BOY-DSP-EN Rev. A INDI BOY DSP Load limitation electronics Load limitation with 3 set points and display to be installed on a front panel Measurement made easy Easy and intuitive calibration Display of hoisted load and input signal Internal monitoring system of the integrity of the load cell and the load limitation electronic (positive safety) Available options 4(0) 20 ma or 0 10 V analog output RS232, RS485, USB or fieldbus capabilities NEMA 4X / IP 65 Rail DIN adaptor Power supply: 48 V AC (only for V AC version) Also available with industrial metallic housing, see CRANE-BOY and CRANE-SUMD products
2 Change from two to one column Change from two to one column INDI BOY DSP Load limitation electronics Specifications Applications Load limitation on: Overhead cranes, Container cranes, Gantry cranes Functions Internal survey system of the load cell and the electronic (positive safety). TEST button in order to check the good working of the detection system. Secret code prohibiting programming by unauthorized persons. Intelligent filter with quick reaction to quick overload while not reacting on transitory non-significant overload. Maximum and minimum memories Specifications INDI-BOY INDI-BOY-24 DISP-BOYP DISP-BOYP-24 DISP-SUMD Type Load limiter for single mv / V load cell Load limiter for single 4 20 ma load cell Summation of several 0 20 ma output signals Input range ±24 mv / ±240 mv 1) 4 20 ma ma Sensor excitation 10 V ma max 2) 24 V DC ± 5 ma max. Display 5 digits (14.2 mm (0.56 inch)) Accuracy A/D converter Converter rate Service temperature range Storage temperature range 0.1 % F.S. 16 bit Up to 20 readings/s 0 50 C ( F) C ( F) Power supply V AC (15 VA) V DC (11 W), 24 V AC (15 VA) IP rating IP 54 3) Quantity of relays 3 Relay type Form A-free potential Breaking capacity relay 3 V AC or 30 V DC (resistive load) F.S.: Full scale 1) Configurable at user's level 2) 5 V ma max (jumper selectable) 3) IP rating for front panel only V AC (15 VA) V DC (11 W), 24 V AC (15 VA) V AC (15 VA) 2 DS/INDI-BOY-DSP-EN Rev. A INDI BOY DSP
3 Electrical connections / Dimensions Model INDI-BOY Fig. 1 R All specified dimensions are in mm R Fig. 2 NOTICE Recommended min. clearance (behind the panel) for mounting is depth 140 mm and height Panel cut-out: 92 mm (-0/+0.8), 45 mm (-0/+0.5). INDI BOY DSP DS/INDI-BOY-DSP-EN Rev. A 3
4 Change from one to two columns INDI BOY DSP Load limitation electronics Model DISP-BOYP Fig. 3 R All specified dimensions are in mm Fig. 4 R NOTICE Recommended min. clearance (behind the panel) for mounting is depth 140 mm and height Panel cut-out: 92 mm (-0/+0.8), 45 mm (-0/+0.5). 4 DS/INDI-BOY-DSP-EN Rev. A INDI BOY DSP
5 Change from two to one column Optional plug-in cards The load limiter has three slots in which plug-in cards can be inserted to provide additional inputs and outputs. The slots can be accessed after removing the front housing cover. 1 2 NOTICE It is possible to install up to 2 additional option cards in the same panel meter. These options have to be of different type. Example: CARD-CDS20 + CARD-CDL10 + CARD-CDC20 is available CARD-CDS20 + CARD-CDS10 or CARD-CDC10 + CARD- CDC20 is not available R00021 Fig. 5: Plug-in cards Plug-in cards 1 CARD-CDC10 RS485 field bus communication interface Available with crew terminals or DB9 connector 2 CARD-CDC20 RS-232C half-duplex communication interface Available with crew terminals or DB9 connector 3 CARD-CDC50 Profibus-DP (EN 50170) communication interface 4 CARD-CDL10 Analog output signal: 0 20 ma, 4 20 ma, or 0 10 V DC 1) 5 CARD-CDS10 & CARD-CDS20 (already included in load limitation electronics) 2 or 4 set-points activating each an independent relay 1) Configurable at user's level INDI BOY DSP DS/INDI-BOY-DSP-EN Rev. A 5
6 Notes Notes 6 DS/INDI-BOY-DSP-EN Rev. A INDI BOY DSP
7 Notes Notes INDI BOY DSP DS/INDI-BOY-DSP-EN Rev. A 7
8 Contact us ABB Automation GmbH Industrial Automation Force Measurement Oberhausener Str Ratingen Germany Tel: Fax: Mail: Note We reserve the right to make technical changes or modify the contents of this document without prior notice. With regard to purchase orders, the agreed particulars shall prevail. ABB does not accept any responsibility whatsoever for potential errors or possible lack of information in this document. We reserve all rights in this document and in the subject matter and illustrations contained therein. Any reproduction, disclosure to third parties or utilization of its contents in whole or in parts is forbidden without prior written consent of ABB. DS/INDI-BOY-DSP-EN Rev. A Copyright 2017 ABB All rights reserved 3BDE701054
Crane-Boy / Crane-BoyP Load limitation electronics
Change from one to two columns Data Sheet DS/CRANE-BOY-EN Rev. A Crane-Boy / Crane-BoyP Load limitation electronics Load limitation with 3 set points and display Measurement made easy Easy and intuitive
More informationABB MEASUREMENT & ANALYTICS DATA SHEET. IT1 Universal weighing terminal
ABB MEASUREMENT & ANALYTICS DATA SHEET IT1 Universal weighing terminal 2 IT1 UNIVERSAL WEIGHING TERMINAL DS/IT1-EN REV. A Measurement made easy Suitable for difficult environmental conditions and locations
More informationABB i-bus KNX HCC/S Heating/cooling circuit controller
ABB i-bus KNX HCC/S 2.2.1.1 Heating/cooling circuit controller Description of product The device is a modular DIN rail component (MDRC) in pro M design. It is intended for installation in distribution
More informationC160 Wall-/Pipe Mounted Universal Process Indicator
Data sheet DS/ EN Rev. I Wall-/Pipe Mounted Universal Process Indicator reliable process indicator, wherever it s needed High visibility LED display the clearest view of your process status 0.1% measurement
More informationDigital Indicator DS 48/24 E
Data Sheet 10/33-2.04-EN Digital Indicator DS 48/24 E The indicator is suitable for measuring direct voltage or direct current. The units are installed in a rugged plastic housing and can be integrated
More informationElectronic timer CT-SDD.22 Star-delta change-over with 2 n/o contacts
Data sheet Electronic timer CT-SDD. Star-delta change-over with n/o contacts The CT-SDD. is an electronic time relay with star-delta change-over. It is from the CT-D range. With their MDRC profile and
More informationTEPI11 P/I signal converter
Contents Data Sheet 10/18-0.15-EN Rev. A TEPI11 P/I signal converter Air pressure in current DMS sensor for gauge pressure Compact design Small dimensions, low weight Can be installed in any orientation
More informationElectronic timer CT-EBD.12 Flasher starting with ON with 1 c/o (SPDT) contact
Data sheet Electronic timer CT-EBD.12 Flasher starting with ON with 1 c/o (SPDT) contact The CT-EBD.12 is an electronic time relay with the function flasher starting with ON. It is from the CT-D range.
More informationABB i-bus KNX BCI/S Boiler/Chiller Interface
ABB i-bus KNX BCI/S 1.1.1 Boiler/Chiller Interface Description of product The boiler/chiller interface is a modular DIN rail component that acts as an interface to the heating/cooling system generator.
More informationBus Connection Unit 560BCU04
Bus Connection Unit 560BCU04 Application The Bus Connection Unit 560BCU04 R0001 is designed to make the RTU560s TSI, TSO, Alarm and Warning signals accessible to the outside. By using the bus connection
More informationRTU560. CT/VT Interface 560CVT10. Meter Operation. Application. Characteristics. Data Sheet CT/VT Interface 560CVT10. Instantaneous Meter Values
CT/VT Interface 560CVT10 The fault current is measured up to 20 times nominal current. Therefore the current inputs withstand 50 times nominal current for 1 s. The CT/VT interface is equipped with one
More informationPluggable interface relays CR-P Pcb relays
Data sheet Pluggable interface relays CR-P Pcb relays Pluggable interface relays are used for electrical isolation, amplification and signal matching between the electronic controlling, e.g. PLC (programmable
More informationControlMaster CM10, CM30, CM50 and CM15 Universal process controllers and indicator Spare parts
Parts List PL/CM EN Rev. E ControlMaster CM10, CM30, CM50 and CM15 Universal process controllers and indicator Spare parts 1Contents Overview...1 Parts identification...2 CM10...2 CM15...4 CM30...6 CM50...8
More informationAccessories for pluggable interface relays CR-P Sockets
Data sheet Accessories for pluggable interface relays CR-P Sockets Characteristics Logical and standard socket for pluggable interface relays CR-P Snap-on mounting on DIN rail Connector for pluggable function
More informationRTU511. Binary Output 23BO62. Characteristics. Application. Data Sheet Binary Output 23BO62. The binary output is made via relay contacts.
Binary Output 23BO62 Characteristics The binary output is made via relay contacts. The 8 outputs are potential isolated against the electronic by optocoupler. All 8 outputs have a separate return. Application
More informationAccessories for pluggable interface relays CR-P, CR-M Pluggable function module
Data sheet Accessories for pluggable interface relays CR-P, CR-M Pluggable function module 2CDC2 91 005 S0011 Characteristics Pluggable function modules for mounting on logical and standard sockets for
More informationFICHA TÉCNICA DE PRODUTO
FICHA TÉCNICA DE PRODUTO PRODUCT DATASHEET HMI Automação e Instrumentação, Lda. Rua dos 5 Caminhos, nº 570 4780-382 Santo Tirso PORTUGAL Web: www.hmi.pt Tel. +351 252 850 501 Fax. +351 300 013 487 Email:
More informationAccessories for pluggable interface relays CR-U Pluggable function modules
Data sheet Accessories for pluggable interface relays CR-U Pluggable function modules 2CDC 291 004 S0011 Characteristics Pluggable function modules for mounting on the sockets CR-U2S and CR-U3S modules:
More informationElectronic timer CT-ARE OFF-delayed without auxiliary voltage, 1 c/o (SPDT) contact
Data sheet Electronic timer CT-ARE OFF-delayed without auxiliary voltage, 1 c/o (SPDT) contact The CT-ARE is an electronic time relay with OFF-delay. It is from the CT-E range. The CT-E range is the economic
More informationPluggable interface relays CR-M Miniature relays
Data sheet Pluggable interface relays CR-M Miniature relays Pluggable interface relays are used for electrical isolation, amplification and signal matching between the electronic controlling, e.g. PLC
More informationString monitoring with CMS - Circuit monitoring system Increased productivity and improved maintenance of PV systems
S O L A R S T R I N G M O N I TO R I N G String monitoring with CMS - Circuit monitoring system Increased productivity and improved maintenance of PV systems Solar plant operators are constantly facing
More informationElectronic timer CT-ERS.12 ON-delayed with 1 c/o (SPDT) contact
Data sheet Electronic timer CT-ERS.12 ON-delayed with 1 c/o (SPDT) contact The CT-ERS.12 is an electronic timer from the CT-S range with ON-delay and 10 time ranges. All electronic timers from the CT-S
More informationElectronic timer CT-SDS.23 Star-delta change-over with 2 n/o contacts
Data sheet Electronic timer CT-SDS. Star-delta change-over with n/o contacts The CT-SDS. is an electronic timer from the CT-S range with Star-delta change-over and 7 time ranges. All electronic timers
More informationSwitching relay CT-IRE with 1 c/o (SPDT) contact
Data sheet Switching relay CT-IRE with 1 c/o (SPDT) contact The CT-IRE is a switching relay from the CT-E range. The CT-E range is the economic range of ABB s time relays and offers a cost effective price-performance
More informationBoxed interface relays and optocouplers R600 Boxed slim relays, optocouplers and accessories
Data sheet Boxed interface relays and optocouplers R600 Boxed slim relays, optocouplers and accessories Boxed interface relays and optocouplers are used for electrical isolation, amplification and signal
More informationPluggable interface relays and optocouplers CR-P Pcb relays, optocouplers and accessories
Data sheet Pluggable interface relays and optocouplers CR-P Pcb relays, optocouplers and accessories Pluggable interface relays and optocouplers are used for electrical isolation, amplification and signal
More informationLME620-AI/-AN (Contrac) Electrical Linear Actuator
Contents Data Sheet Rev. A LME620-AI/-AN (Contrac) Electrical Linear Actuator For continuous positioning, Rated force 4 kn (900 lbf), With integrated electronics or for use with separate electronic unit
More informationAdapter Plates for continuous Part-Turn Actuators (Contrac)
Change from one to two columns Data Sheet DS/CONTRAC/ADAPTER_PLATE-EN Rev. C Adapter Plates for continuous Part-Turn Actuators (Contrac) Steel plate including fixing screws for mechanically adapting lever
More informationABB i-bus KNX KNX/EnOcean Gateway EG/A , 2CDG R0011
Tecnical Data 2CDC 502 079 D0201 ABB i-bus KNX Gateway for integration of EnOcean devices into KNX TP-1 (EIB) control systems and vice versa. The ABB allows a complete and natural integration of EnOcean
More informationIntroduction. For more information. HART Protocol 7.0 Valid for software levels from 05.00
ABB MEASUREMENT & ANALYTICS INTERFACE DESCRIPTION TZIDC Digital Positioner HART Protocol 7.0 Valid for software levels from 05.00 Introduction The TZIDC represents the digital, intelligent positioner for
More information2600T Series Pressure Transmitters How to replace Profibus PA pressure transmitters with the 266 PA
Technical Information TI/266PB-EN 2600T Series Pressure Transmitters How to replace Profibus PA pressure transmitters with the 266 PA Pressure Measurement Engineered solutions for all applications 2600T
More informationRTU560 Connections and Settings DIN Rail RTU 560CIG10
Connections and Settings DIN Rail RTU 560CIG10 Application, characteristics and technical data have to be taken from the hardware data sheet: 560CIG10 1KGT 150 719 Operation The 560CIG10 is a DIN rail
More informationCharacteristics. Application RTU560. HMI unit 560HMR01. Data Sheet HMI unit 560HMR01
HMI unit 560HMR01 Characteristics Application The 560HMR01 is a rack based human machine interface board of the RTU560 system. The essential tasks of the 560HMR01 are: Interface to RTUs that are running
More informationFICHA TÉCNICA DE PRODUTO
FICHA TÉCNICA DE PRODUTO PRODUCT DATASHEET HMI Automação e Instrumentação, Lda. Rua dos 5 Caminhos, nº 570 4780-382 Santo Tirso PORTUGAL Web: www.hmi.pt Tel. +351 252 850 501 Fax. +351 300 013 487 Email:
More informationElectronic timer CT-ARS.21 OFF-delayed without auxiliary voltage with 2 c/o (SPDT) contacts
Data sheet Electronic timer CT-ARS.21 OFF-delayed without auxiliary voltage with 2 c/o (SPDT) contacts The CT-ARS.21 is an electronic timer from the CT-S range with true OFF-delay. It provides 7 time ranges
More informationRedundancy unit CP-D RU Accessory for CP range power supplies (e.g. switch mode power supplies CP-D range)
Data sheet Redundancy unit Accessory for CP range power supplies (e.g. switch mode power supplies CPD range) The provides decoupling of two power supply units and ensures automatic redundant power supply
More informationElectronic timer CT-ARS.11 OFF-delayed without auxiliary voltage with 1 c/o (SPDT) contact
Data sheet Electronic timer CT-ARS.11 OFF-delayed without auxiliary voltage with 1 c/o (SPDT) contact The CT-ARS.11 is an electronic timer from the CT-S range with true OFF-delay. It provides 7 time ranges
More informationMessaging module CP-C MM
2CDC 271 087 F0t04 Features Pluggable onto CP C range primary switch mode power supplies REMOTE OFF input to switch off the power supply unit remotely Monitoring of the input voltage of the power supply
More informationUsing the WirelessHART transmitter TTF300-W as repeater to extend the availability of a WirelessHART network
Application note AN/WirelessHART/TTF300-W/Repeater-EN Using the WirelessHART transmitter TTF300-W as repeater to extend the availability of a WirelessHART network The WirelessHART transmitter TTF300-W
More informationABB MEASUREMENT & ANALYTICS DATA SHEET. DAT200 Asset Vision Basic and DTM Device Typ Manager
ABB MEASUREMENT & ANALYTICS DATA SHEET DAT200 Asset Vision Basic and DTM Device Typ Manager 2 DAT200 ASSET VISION BASIC AND DTM DEVICE TYP MANAGER DS/DTM/DAT200-EN REV. G Measurement made easy DTM500 Contains
More informationHow to connect ABB Ethernet inverters with VSN700 Data Logger over Ethernet
ABB SOLAR INVERTERS How to connect ABB Ethernet inverters with Data Logger over Ethernet Basic information -05 Data Logger is a monitoring device developed by ABB. -05 Data Logger can be used to monitor
More informationABB ME ASURE ME NT & AN AL YT ICS D AT A SHE ET. WirelessHART components Gateway and accessories
ABB ME ASURE ME NT & AN AL YT ICS D AT A SHE ET WirelessHART components Gateway and accessories 2 Measurement made easy The ABB offering on WirelessHART accessories connect wireless sensors to the automation
More informationVoltage monitoring relays CM-ESS.1 For single-phase AC/DC voltages
Data sheet Voltage monitoring relays CM-ESS.1 For single-phase AC/DC voltages The CM-ESS.1 is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of
More informationIndicomp 4 Bargraph Indicator
Data Sheet 10/30-2.16-EN Indicomp 4 Bargraph Indicator Display is optionally LCD active: self-luminuous green on black self-luminuous green on blue LCD passive: self-luminuous black on light grey 2 input
More informationControlMaster controllers and indicators ConfigPilot
ABB MEASUREMENT & ANALYTICS INSTRUCTION ControlMaster controllers and indicators ConfigPilot Creating, uploading and downloading configurations Measurement made easy 1 Introduction A configuration for
More informationC1950 (STLR & HTST) Pasteurizer Recorder and Recorder Controller
Data sheet DS/C1950 EN Rev. K C1950 (STLR & HTST) The complete recording and control solution for pasteurization processes Dedicated Pasteurizer Recorder/Controller designed to meet requirements of the
More informationDI572 Digital Input Module
Ordering Data DATA SHEET DI572 Digital Input Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 230 500 R0000 1TNE 968 901 R3101 1TNE 968 901 R3102 1TNE 968 901 R3103 1TNE 968
More informationApplication. Characteristics RTU540. Data Sheet Communication Unit 560CMD11. Communication Unit 560CMD11
Data Sheet Communication Unit 560CMD11 Communication Unit 560CMD11 The SLC works as master for the RTU560 serial peripheral bus (I/O-Interface/ Wired-OR-Bus ). The MPU is responsible for the other tasks.
More informationAC500-eCo: your PLC from ABB Unique scalable concept, optimal costs... Change for more!
AC500-eCo: your PLC from ABB Unique scalable concept, optimal costs... Change for more! 2 2CDC125098B0202 Actual size photograph of the AC500-eCo Change for more Modern PLC solutions need to deliver the
More informationDIGITAL DISPLAY. for Industry Applications. Series PAXD. Key-Features:
DIGITAL DISPLAY for Industry Applications Series PAXD Key-Features: Content: Technical Data.2 Technical Drawing...2 Electrical Connection...3 Plug-In Cards...4 Programming & Software...5 Order Code & Accessories...6-5
More informationABB i-bus KNX AC/S Application Controller
ABB i-bus KNX AC/S 1.2.1 Application Controller Description of product Automation controller with pre-defined automation modules for comprehensive heating, ventilation and air conditioning automation (HVAC
More informationApplication. Characteristics RTU560. Data Sheet Communication Unit 560CMD11. Communication Unit 560CMD11
Communication Unit 560CMD11 The SLC works as master for the RTU560 serial peripheral bus (I/O-Interface/ Wired-OR-Bus ). The MPU is responsible for the other tasks. The MPU handles the absolute time and
More informationTU531, TU532 Terminal Unit
Ordering Data DATA SHEET TU531, TU532 Terminal Unit 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 217 200 R0001 1SAP 217 000 R0001 1SAP 417 000 R0001 TU531, terminal unit, 230 VAC,
More informationFICHA TÉCNICA DE PRODUTO
FICHA TÉCNICA DE PRODUTO PRODUCT DATASHEET HMI Automação e Instrumentação, Lda. Rua dos 5 Caminhos, nº 570 4780-382 Santo Tirso PORTUGAL Web: www.hmi.pt Tel. +351 252 850 501 Fax. +351 300 013 487 Email:
More informationPart No. Description Product Life Cycle Phase *) unit, 24 VDC, spring terminals. unit, 24 VDC, spring terminals, XC version
Ordering Data DATA SHEET TU520 Terminal Unit 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 214 400 R0001 1SAP 414 400 R0001 TU520-ETH, PROFINET I/O terminal unit, 24 VDC, spring
More informationABB i-bus KNX Thermoelectric Valve Drive, 230 V TSA/K 230.2, 2CDG R0011
Technical Data 2CDC508160D0201 ABB i-bus KNX Product Description The Thermoelectric Valve Drive is used to open and close valves in Heating, Ventilating and Air-Conditioning (HVAC) systems. The device
More informationDC561, digital input/output module,
Ordering Data DATA SHEET DC561 Digital Input/Output Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1TNE 968 902 R2001 DC561, digital input/output module, 16 configurable inputs/outputs,
More informationData Sheet T 6493 EN. TROVIS 6400 Automation System TROVIS 6493 Compact Controller. For panel mounting (front frame 48 x 96 mm/1.89 x 3.
Data Sheet T 6493 EN TROVIS 6400 Automation System TROVIS 6493 Compact Controller For panel mounting (front frame 48 x 96 mm/1.89 x 3.78 inch) Application Digital controller to automate industrial and
More informationDTM Bundle & DAT200 Asset Vision Basic for intelligent field devices
Contents Data Sheet Rev. A DTM Bundle & DAT00 Asset Vision Basic for intelligent DTM500 bundle Contains ABB device driver (DTM) Supports FDT Standard 1./1..1 Adheres to the FDT Style Guide Graphical overview
More informationMotor control and protection Universal Motor Controller UMC100-FBP
Motor control and protection Universal Motor Controller UMC100-FBP Universal motor controllers from ABB the intelligent on-site solution. Large industrial plants often contain several thousand motors in
More informationThermistor motor protection relays CM-MSS.22 and CM-MSS.23
Data sheet Thermistor motor protection relays CM-MSS.22 and CM-MSS.23 The thermistor motor protection relays CM-MSS.22 and CM-MSS.23 monitor the winding temperature of motors and protect them from overheating,
More informationwith Backlight Graphic LCD Screen
with Backlight Graphic LCD Screen ENERGY AND AUTOMATION POWER OF ENERGY SAVING For the control of energy distribution systems detecting when problems occur that could put the quality and availability of
More informationABB MEASUREMENT & ANALYTICS DATA SHEET. C1950 (STLR & HTST) Pasteurizer recorder and recorder / controller
ABB MEASUREMENT & ANALYTICS DATA SHEET C1950 (STLR & HTST) Pasteurizer recorder and recorder / controller 2 C1950 (STLR & H TST ) PAST EURI ZE R RE CORDE R AND RE CORDE R / CONTROLLE R DS/C 1950-E N RE
More informationDX561 Digital Input/Output Module
Ordering Data DATA SHEET DX561 Digital Input/Output Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1TNE 968 902 R2301 1TNE 968 901 R3101 DX561, digital input/output module, 8 DI
More informationControlMaster PC Configuration
Quick Start Guide IM/CM/PC-EN Rev. A ControlMaster PC Configuration 1 Introduction This Quick Start Guide describes installation and basic operation of the ControlMaster PC configuration software and includes:
More informationCoriolisMaster mass flowmeter Automation solution for mixing applications
ABB EASUREENT & ANALYTICS APPLICATION NOTE Coriolisaster mass flowmeter Automation solution for mixing applications High-precision and cost-effective mixing of conductive or nonconductive fluid media easurement
More informationDI561 Digital Input Module
Ordering Data DATA SHEET DI561 Digital Input Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1TNE 968 902 R2101 1TNE 968 901 R3101 1TNE 968 901 R3103 1TNE 968 901 R3105 DI561, digital
More informationDC562, digital input/output module,
Ordering Data DATA SHEET DC562 Digital Input/Output Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 231 900 R0000 1TNE 968 901 R3101 1TNE 968 901 R3102 1TNE 968 901 R3103 1TNE
More information8241 Silica Monitor. Cost-effective automated monitoring of silica in a wide range of applications
Data sheet DS/8241 EN Rev. K 8241 Silica Monitor Cost-effective automated monitoring of silica in a wide range of applications Continuous sample reaction ensures optimum speed of response Fully dynamic
More informationTF501, TF521 Terminal Bases
Ordering Data DATA SHEET TF501, TF521 Terminal Bases 1 Ordering Data Part No. Scope of delivery Product life cycle status 1SAP 117 000 R0271 1SAP 317 000 R0271 1SAP 117 200 R0271 1SAP 317 200 R0271 TF501-CMS,
More informationDIGITAL ANZEIGE. for Industry Applications. Series PAXP, PAXDP. Key-Features:
DIGITAL ANZEIGE for Industry Applications Series PAXP, PAXDP Key-Features: Content: Technical Data.2 Technical Drawing...3 Electrical Connection PAXP...3 Electrical Connection PAXDP...4 Plug-in Cards...5
More informationFICHA TÉCNICA DE PRODUTO
FICHA TÉCNICA DE PRODUTO PRODUCT DATASHEET HMI Automação e Instrumentação, Lda. Rua dos 5 Caminhos, nº 570 4780-382 Santo Tirso PORTUGAL Web: www.hmi.pt Tel. +351 252 850 501 Fax. +351 300 013 487 Email:
More informationAI561 Analog Input Module
Ordering Data DATA SHEET AI561 Analog Input Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1TNE 968 902 R1101 AI561, analog input module, 4 AI, U/I 1TNE 968 901 R3101 1TNE 968
More informationRedundancy unit CP-A RU
2CDC 271 010 F0t06 Features Decoupling of CP power supply units with 2 inputs, each up to 20 A per input / channel Output up to 40 A True redundancy by 100 % decoupling of two parallel connected power
More informationSM2000 Videographic recorder Spare parts and upgrade kits
ABB MEASUREMENT & ANALYTICS PARTS LIST SM2000 Videographic recorder Spare parts and upgrade kits Measurement made easy Sales Service Introduction This parts list contains: exploded diagrams of the SM2000
More informationTransmitter / Controller Series J dtrans ph 01, Rd 01, Lf 01, Rw 01, Az 01
Transmitter / Controller Series J dtrans ph 01, Rd 01, Lf 01, Rw 01, Az 01 with C-UL-US approval PR 20004 GB ph mv ms/cm µs/cm M xcm Transmitter / Controller Series J dtrans ph 01, Rd 01, Lf 01, Rw 01,
More informationElectronic timers CT range
Electronic timers CT range ABB electronic timers CT range For many years, ABB s CT range electronic timers has been used in applications worldwide and has proven its excellent functionality in daily use
More informationABB i-bus KNX Weather Unit, 1-fold, MDRC WZ/S , 2CDG110184R0011
Technical Data 2CDC504091D0201 ABB i-bus KNX Product description The Weather Unit WZ/S 1.3.1.2 is used - primarily in residential applications - to record weather data. The Weather Sensor WES/A 3.1 is
More informationFICHA TÉCNICA DE PRODUTO
FICHA TÉCNICA DE PRODUTO PRODUCT DATASHEET HMI Automação e Instrumentação, Lda. Rua dos 5 Caminhos, nº 570 4780-382 Santo Tirso PORTUGAL Web: www.hmi.pt Tel. +351 252 850 501 Fax. +351 300 013 487 Email:
More informationThermistor motor protection relays CM-MSS.12 and CM-MSS.13
Data sheet Thermistor motor protection relays CM-MSS.12 and CM-MSS.13 The thermistor motor protection relays CM-MSS.12 and CM-MSS.13 monitor the winding temperature of motors and protect them from overheating,
More informationAO523 Analog Input Module
Ordering Data DATA SHEET AO523 Analog Input Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 250 200 R0001 1SAP 450 200 R0001 AO523, analog output module, 16 AO, U/I, 12 bits
More informationElectronic timer CT-APS.21 OFF-delayed with 2 c/o (SPDT) contacts
Data sheet Electronic timer CT-APS.21 OFF-delayed with 2 c/o (SPDT) contacts The CT-APS.21 is an electronic timer from the CT-S range with OFF-delay. It provides 10 time ranges and a continuous rated control
More informationPower supply CP-D 12/2.1 Primary switch mode power supply
Data sheet Power supply CP-D 12/2.1 Primary switch mode power supply The CP-D range of modular power supply units in MDRC design (modular DIN rail components) is ideally suited for installation in distribution
More informationSM1000 Videographic recorder Spare parts and upgrade kits
ABB MEASUREMENT & ANALYTICS PARTS LIST SM1000 Videographic recorder Spare parts and upgrade kits Measurement made easy Sales Service Introduction This parts list contains: exploded diagrams of the SM1000
More informationProcess displays For current and voltage
Features Voltage input TRMS-AC/DC up to 600 V Current input AC/DC 1 A, 5 A and shunt (precision resistor) 60 or 100 mv With 2 or 4 limits Display range can be linearised Min, Max, Hold functions 4 20 ma
More informationSafety Light Grid Orion2 Extended
Safety Light Grid Orion Extended Orion Extended is a compact light grid for access protection in muting applications. The light grid has -4 beams and is intended for body detection. Cost effective solution
More informationThe new Arc Fault Detection Device S-ARC1 Maximum safety easy installation
ARC FAULT DETECTION DEVICE (AFDD) The new Arc Fault Detection Device S-ARC1 Maximum safety easy installation The S-ARC1 is the new Arc Fault Detection Device (AFDD) with an integrated Miniature Circuit
More informationMP-2000 Dual Channel LVDT/RVDT Readout/Controller
Large backlit dual channel display Menu driven setup and calibration 100 to 240 VAC line powered MIN, MAX, TIR, A+B and A-B functions 2.5, 3.3, 5 and 10kHz selectable excitation Analog and RS232 outputs
More informationRTU500 series Data Sheet Power Supply CP-E 24/2.5
Data Sheet Power Supply CP-E 24/2.5 Power Supply CP-E 24/2.5 Application The primary switch mode power supply offers two voltage input ranges. This enables the supply with AC or DC. Furthermore it is equipped
More informationABB MEASUREMENT & ANALYTICS DATA SHEET. Testomat AW101 Water hardness monitor
ABB MEASUREMENT & ANALYTICS DATA SHEET Testomat AW101 Water hardness monitor TE STO MAT AW 101 WATER H ARDNE SS MONITOR DS/AW100-E N RE V. E Measurement made easy A unique water hardness monitoring system
More informationABB Control Technologies. ABB ScreenMaster paperless recorders Versatile recording anywhere
ABB Control Technologies ABB ScreenMaster paperless recorders Versatile recording anywhere ABB ScreenMaster paperless recorders ABB s ScreenMaster paperless recorders provide the reliable, cost effective
More informationEPGG001. Fieldbus Gateway RS-232 to PROFINET. Industrial Communication. Technical Data. Part Number
Fieldbus Gateway RS-232 to PROFINET EPGG001 Part Number Easy handling Gateway from RS-232/422/485 interfaces to PROFINET With two Industrial Ethernet ports Technical Data Electrical Data Supply Voltage
More informationABB i-bus KNX Analogue Input, 4-fold, MDRC AE/S , 2CDG110190R0011
Technical Data 2CDC504084D0201 ABB i-bus KNX Product description The device is used to record analogue data. Four conventional sensors can be connected to the device. The connection to the bus is established
More information/8 DIN Universal Process Indicator
Data Sheet SS/_ High visibility LED display the clearest view of your process status.% measurement accuracy precise indication of process measurement Analog and relay outputs as standard alarm and retransmission
More informationWTX120. Legal-for-trade industrial weighing terminal. Special features. Data sheet
WTX120 Legal-for-trade industrial weighing terminal Special features - Connection of up to 8 SG load cells (350 ohm) via plug terminals - Display resolution up to 30,000, legal for trade up to 10,000e
More informationPU5 5-digit digital panel meter in 96x48 mm (BxH) Universal measuring inputs: Pt100, current, voltage, shunt, thermocouple, resistance
PU5 5-digit digital panel meter in 96x48 mm (BxH) Universal measuring inputs: Pt100, current, voltage, shunt, thermocouple, resistance red display of -9999 99999 digits installation depth: 120 mm without
More informationThermistor motor protection relays CM-MSS.22 and CM-MSS.23
Data sheet Thermistor motor protection relays CM-MSS.22 and CM-MSS.23 The thermistor motor protection relays CM-MSS.22 and CM-MSS.23 monitor the winding temperature of motors and protect them from overheating,
More informationThermistor motor protection relay CM-MSS.11
Data sheet Thermistor motor protection relay CM-MSS.11 The thermistor motor protection relay CM-MSS.11 monitors the winding temperature of motors and protects them from overheating, overload and insufficient
More informationDisplay and Monitoing Units
Display and Monitoing Units DISPLAY AND MONITOrING UNITS 13 The universal display unit HDA 5500 provides the means of visualizing and further processing the signals from our sensors. The unit is designed
More informationVISY-Output 8. Technical Documentation. 8-Channel relay output module. Version: 3 Edition: Art. no.:
Technical Documentation VISY-Output 8 8-Channel relay output module Version: 3 Edition: 2016-09 Art. no.: 350072 FAFNIR GmbH Schnackenburgallee 149 c 22525 Hamburg Germany Tel.: +49 / 40 / 39 82 07 0 Fax:
More information