Digimatic. Height Gages. Linear Height. Depth Gages. SuperCaliper ABSOLUTE. Coolant Proof Caliper. ABSOLUTE Digimatic Caliper ABSOLUTE

Transcription

1 D Small Tool Instruments and Data Management Digimatic Caliper Digimatic Height Gages Linear Height Depth Gages SuperCaliper ABSOLUTE Coolant Proof Caliper ABSOLUTE Digimatic Caliper ABSOLUTE Digimatic Offset Caliper INDEX Digimatic Caliper Super Caliper-Solar Powered D-2 ABSOLUTE Solar Caliper D-3 ABSOLUTE Coolant Proof Caliper D-4, 5 ABSOLUTE Digimatic Caliper D-6, 7 Dial Caliper D-8, 9 Vernier Caliper - Standard Model D-10, 11 Vernier Caliper - w/thumb Clamp D-12 Vernier Caliper - w/fine Adjustment D-13 Vernier Caliper - w/nib Style Jaws D-14 ABSOLUTE Digimatic & Vernier Caliper D-15, 17 Long Jaw Vernier Caliper D-16 Digimatic Carbon Fiber Caliper D-18, 19 ABSOLUTE Coolant Proof Carbon Fiber Caliper D-20 ABSOLUTE Back-Jaw Centerline Caliper D-21 Offset Caliper D-22 Offset Centerline Caliper D-23 Point Caliper D-24 Blade Type Caliper D-25 Neck Caliper D-26 Tube Thickness Caliper D-27 ABSOLUTE Low Force Caliper D-28 ABSOLUTE Snap Caliper D-28 Scribing Caliper D-29 ABSOLUTE Inside Caliper D-30, 31 MyCAL-Lite D-32 Plastic Caliper D-32 Center Line Gage D-33 Depth Base Attachment D-33 Digimatic Height Gages Digimatic Height Gage D-34, 35 Dial Height Gage D-36 ABSOLUTE Digimatic Height Gage D-37, 38 Heightmatic D-39 Vernier Height Gage D-40, 41 Carbide-Tipped Scriber D-42 Optional Accessories for Height Gage D-42 CERA Caliper Checker D-43 Linear Height LH-600D D-44, 45 QM-Height D-46, 47 Depth Gages Depth Micrometer D-48, 49 Depth Micro Checker D-49 ABSOLUTE Digimatic Depth Gage D-50 Vernier Depth Gage D-51 Vernier Depth Gage - Hook End Type D-52 ABSOLUTE Digimatic Depth Gage - D-52 Hook End Type Dial Depth Gage D-53 Extension Bases D-53 ABSOLUTE Digimatic/Dial Depth Gage D-54, 55 Tire Thread Depth Gage D-56 Digimatic Height Gage D-1

2 Super Caliper-Solar Powered SERIES 500 No battery or origin reset needed for IP67 Digital Caliper necessary, a measurement can be started any time and there is no restriction on operating speed. Insufficient illumination state Sufficient illumination state 16.78mm No need for origin set up Range Order No. Accuracy Resolution 0-150mm ±0.02mm 0.01mm 0-150mm * ±0.02mm 0.01mm 0-200mm ±0.02mm 0.01mm 0-200mm * ±0.02mm 0.01mm Caliper that is eco-friendly with no battery. in workshop conditions. reliability. do not contain harmful substances and is Improvement in surface finish of beam Direction of the length Ra: 0.126μm Super Caliper Direction of the length Ra: 0.07μm Inch/ Range Order No. Accuracy Resolution 0-6" / 0-150mm ± / 0.01mm 0-6" / 0-150mm * ± / 0.01mm 0-8" / 0-200mm ± / 0.01mm 0-8" / 0-200mm * ± / 0.01mm Resolution:.0005"/0.01mm or 0.01mm Repeatability:.0005 / 0.01mm Display: LCD Length standard: ABSOLUTE electromagnetic induction linear encoder Max. response speed: Unlimited Function Origin-set, Optional Accessories 05CZA624: SPC cable with data switch (40 / 1m) 05CZA625: SPC cable with data switch (80 / 2m) IP67 protection level No ingress of dust. immersion in water. effects shall not be possible when the enclosure is temporarily immersed 1 meter in water under standardized conditions of pressure and time (30 min.). AND MASS About the charge function (Super Caliper) Th 60 lux. - Caliper can be used Range L a b c d Mass (g) 0-6 / 0-150mm / 0-200mm Jaw thickness: 3.5mm The charge function allows the operator to use this Super illumination (less than the minimum necessary illumination intensity). the charging conditions. If this Super Caliper is left unused in an illumination of 500 lux (usual for manufacturing reach full charge. D-2

3 ABSOLUTE Solar Caliper SERIES 500 No battery or origin reset needed Mitutoyo's Absolute Solar Digimatic Caliper off for the entire life of the caliper. At 60 Lux and up the ABSOLUTE solar caliper is turned on ready to start measurement. low light intensity. durability Resolution:.0005 /0.01mm or 0.01mm Repeatability:.0005 / 0.01mm Display: LCD Length standard:absolute electrostatic capacitance type linear encoder Max. response speed: Unlimited Function Origin-set, Data hold, Data output, Optional Accessories : Data hold unit (SPC output model only) : SPC cable with data switch (40 / 1m) : SPC cable with data switch (80 / 2m) Range Order No. Accuracy Resolution Remarks 0-100mm ±0.02mm 0.01mm ø1.9mm round depth bar 0-100mm * ±0.02mm 0.01mm ø1.9mm round depth bar 0-150mm ±0.02mm 0.01mm 0-150mm * ±0.02mm 0.01mm 0-200mm ±0.02mm 0.01mm 0-200mm * ±0.02mm 0.01mm Inch/ Range Order No. Accuracy Resolution Remarks 0-4" / 0-100mm ± / 0.01mm.075 round depth bar 0-4" / 0-100mm * ± / 0.01mm.075 round depth bar 0-6" / 0-150mm ± / 0.01mm 0-6" / 0-150mm * ± / 0.01mm 0-8" / 0-200mm ± / 0.01mm 0-8" / 0-200mm * ± / 0.01mm AND MASS Range L a b c Mass (g) 0-4" / 0-100mm " / 0-150mm " / 0-200mm D-3

4 ABSOLUTE Coolant Proof Caliper SERIES 500 with Dust/Water Protection Conforming to IP67 Level exposed to coolant, water, dust or oil. scale. system Resolution:.0005"/0.01mm or 0.01mm Repeatability:.0005 / 0.01mm Display: LCD Length standard: ABSOLUTE electromagnetic induction linear encoder Max. response speed: Unlimited Battery life: Approx. 3 years under normal use Built-in ABS (absolute) scale means that these calipers are ready to use immediately after power-on without origin resetting. It s as easy as vernier caliper measurements. Function Origin-set, Zero-setting, Automatic power on/off, Data output, Optional Accessories 05CZA624: SPC cable with data switch (40 / 1m) 05CZA625: SPC cable with data switch (80 / 2m ) 05CZA624 with a water-resistant SPC cable. D-4

5 Air leakage detection system used for water-proof testing resistance. Testing begins by placing a measuring tool into none of the air in the capsule seeps into the measuring tool, master, and the differential pressure gage will continue to measuring tool, it will create an air pressure difference in the amount indicated by the differential pressure gage. Thus, detection of air pressure differences is used as a criterion for calipers and Coolant Proof micrometer is tested this way for Capsule Valve Differential pressure gage Air Valve Master IP67 model Range Order No. Accuracy Resolution Remarks 0-150mm * +/-0.02mm 0.01mm 0-150mm /-0.02mm 0.01mm 0-150mm /-0.02mm 0.01mm dia. 1.9mm rod depth bar 0-150mm /-0.02mm 0.01mm carbide-tipped jaws for ID measurement 0-150mm /-0.02mm 0.01mm carbide-tipped jaws for OD & ID measurement 0-200mm * +/-0.02mm 0.01mm 0-200mm /-0.02mm 0.01mm 0-200mm /-0.02mm 0.01mm carbide-tipped jaws for ID measurement 0-200mm /-0.02mm 0.01mm carbide-tipped jaws for OD & ID measurement 0-300mm * +/-0.03mm 0.01mm 0-300mm /-0.03mm 0.01mm IP67 protection level No ingress of dust. immersion in water. effects shall not be possible when the enclosure is temporarily immersed 1 meter in water under standardized conditions of pressure and time (30 min.). Inch/ Range IP67 model Order No. Accuracy Resolution Remarks 0-6 /0-150mm * +/ /0.01mm 0-6 /0-150mm / /0.01mm 0-6 /0-150mm * +/ /0.01mm.075 rod depth bar 0-6 /0-150mm / /0.01mm.075 rod depth bar 0-6 /0-150mm * +/ /0.01mm carbide-tipped jaws for ID measurement 0-6 /0-150mm / /0.01mm carbide-tipped jaws for ID measurement 0-6 /0-150mm * +/ /0.01mm carbide-tipped jaws for OD & ID measurement 0-6 /0-150mm / /0.01mm carbide-tipped jaws for OD & ID measurement 0-8 /0-200mm * +/ /0.01mm 0-8 /0-200mm / /0.01mm 0-8 /0-200mm * +/ /0.01mm carbide-tipped jaws for ID measurement 0-8 /0-200mm / /0.01mm carbide-tipped jaws for ID measurement 0-8 /0-200mm * +/ /0.01mm carbide-tipped jaws for OD & ID measurement 0-8 /0-200mm / /0.01mm carbide-tipped jaws for OD & ID measurement 0-12 /0-300mm * +/ /0.01mm 0-12 /0-300mm / /0.01mm AND MASS Range L a b c e Mass (g) 0-6 / 0-150mm / 0-200mm / 0-300mm D-5

6 ABSOLUTE Digimatic Caliper SERIES 500 with Exclusive ABSOLUTE Encoder Technology Mitutoyo's absolute Digimatic Caliper is the next generation of electronic calipers. It keeps track of its origin point once set. displays the actual slider position ready to start measurement. No more repeated zero setting is necessary with the absolute encoder technology as well as no more care High quality guide surface finish for smooth slider movement Direction of the length Ra: 0.126μm ABS Digimatic Caliper Direction of the length Ra: 0.07μm be Zero-Set at any slider position along the scale for incremental comparison measurements. This switch will also allow return to the absolute (ABS) coordinate and display of the true position from the origin point (usually jaws-closed point). to and including 12 or 300mm. Except 40 / 1000mm supplied in wooden case AND MASS Resolution:.0005 /0.01mm or 0.01mm Repeatability:.0005 / 0.01mm Display: LCD Length standard: ABSOLUTE electrostatic capacitance type linear encoder Max. response speed: Unlimited Battery: SR44 (1 pc.), Battery life: Approx. 3.5 years under normal use Range L a b c d Mass (g) 0-4 / 0-100mm / 0-150mm / 0-200mm / 0-300mm Function Origin-set, Zero-setting, Data output, Optional Accessories : Data hold unit : SPC cable with data switch (40 / 1m) : SPC cable with data switch (80 / 2m) Range L a b c d Mass (g) 0-18 / 0-450mm / 0-600mm / mm D-6

7 Range Order No. Accuracy Resolution Remarks 0-100mm ±0.02mm 0.01mm ø1.9mm rod depth bar 0-150mm ±0.02mm 0.01mm 0-150mm ±0.02mm 0.01mm Carbide-tipped jaws for OD measurement 0-150mm ±0.02mm 0.01mm Carbide-tipped jaws for OD & ID measurement 0-150mm ±0.02mm 0.01mm ø1.9mm rod depth bar 0-200mm ±0.02mm 0.01mm 0-200mm ±0.02mm 0.01mm Carbide-tipped jaws for OD measurement 0-200mm ±0.02mm 0.01mm Carbide-tipped jaws for OD & ID measurement 0-300mm ±0.03mm 0.01mm 0-450mm * ±0.05mm 0.01mm 0-600mm * ±0.05mm 0.01mm mm * ±0.07mm 0.01mm Inch/ Range Order No. Accuracy Resolution Remarks 0-4" / 0-100mm ± / 0.01mm.075" rod depth bar 0-4" / 0-100mm * ± / 0.01mm.075" rod depth bar 0-6" / 0-150mm ± / 0.01mm 0-6" / 0-150mm ± / 0.01mm Carbide-tipped jaws for OD measurement 0-6" / 0-150mm ± / 0.01mm Carbide-tipped jaws for OD & ID measurement 0-6" / 0-150mm ± / 0.01mm.075" rod depth bar 0-6" / 0-150mm * ± / 0.01mm 0-6" / 0-150mm * ± / 0.01mm Carbide-tipped jaws for OD measurement 0-6" / 0-150mm * ± / 0.01mm Carbide-tipped jaws for OD & ID measurement 0-8" / 0-200mm ± / 0.01mm 0-8" / 0-200mm ± / 0.01mm Carbide-tipped jaws for OD measurement 0-8" / 0-200mm ± / 0.01mm Carbide-tipped jaws for OD & ID measurement 0-8" / 0-200mm * ± / 0.01mm 0-8" / 0-200mm * ± / 0.01mm Carbide-tipped jaws for OD measurement 0-8" / 0-200mm * ± / 0.01mm Carbide-tipped jaws for OD & ID measurement 0-12" / 0-300mm ± / 0.01mm 0-12" / 0-300mm ± / 0.01mm Carbide-tipped jaws for OD measurement 0-12" / 0-300mm ± / 0.01mm Carbide-tipped jaws for OD & ID measurement 0-12" / 0-300mm * ± / 0.01mm 0-12" / 0-300mm * ± / 0.01mm Carbide-tipped jaws for OD measurement 0-12" / 0-300mm * ± / 0.01mm Carbide-tipped jaws for OD & ID measurement 0-18" / 0-450mm ± / 0.01mm 0-24" / 0-600mm ± / 0.01mm 0-40" / mm ± / 0.01mm D-7

8 Dial Caliper SERIES 505 smooth sliding and high shock protection. to the sliding surface to increase wear resistance (except for 0-12 and 0-300mm model). sliding jaw position. and ID jaws Range Order No. Accuracy Graduation Remarks 0-100mm /-0.015mm 0.01mm 0-150mm /-0.03mm 0.01mm 0-200mm /-0.03mm 0.01mm Range Order No. Accuracy Graduation Remarks 0-150mm /-0.03mm 0.02mm 0-150mm /-0.03mm 0.02mm Carbide-tipped jaws for OD measurement 0-150mm /-0.03mm 0.02mm Carbide-tipped jaws for OD & ID measurement 0-200mm /-0.03mm 0.02mm 0-300mm /-0.04mm 0.02mm D-8

9 "Quadri" (4-way) Measurement 1. Outside measurement 2. Inside measurement Inch Range Order No. Accuracy Graduation Remarks / / / Blue Dial Face / Purple Dial Face / Green Dial Face / Red Dial Face / Orange Dial Face / Black Dial Face / Black Dial Face with Ratchet Stop / / Carbide-tipped jaws for OD measurement / Carbide-tipped jaws for OD & ID measurement / / / Carbide-tipped jaws for OD measurement / Carbide-tipped jaws for OD & ID measurement / / Carbide-tipped jaws for OD measurement / Carbide-tipped jaws for OD & ID 3. Step measurement Inch Range Order No. Accuracy Graduation Remarks / / / Carbide-tipped jaws for OD measurement / / / Carbide-tipped jaws for OD measurement AND MASS 4. Depth measurement Results of 1,000,000 cycle sliding wear test TiN coating Conventional Range L a b c d Mass (g) 0-4"/ 0-100mm "/ 0-150mm "/ 0-200mm "/ 0-300mm D-9

10 Vernier Caliper SERIES 530 Standard Model (inside diameter), depth, and steps. easy reading. (metric/inch and inch models only) position. Except 24 / 600mm models are carton only. 40 / 1000mm supplied in wooden case Carbide-tipped AND MASS Carbide-tipped jaw type Range L a b c d Mass (g) 0-150mm mm mm mm , mm ,300 Round depth bar type D-10

11 Quadri (4 way) Measurement Measurement Applications OD measurement Range Order No. Accuracy Graduation Remarks 0-150mm ±0.05mm 0.05mm ø 1.9mm Depth bar 0-150mm ±0.05mm 0.05mm 0-150mm ±0.05mm 0.05mm Carbide-tipped jaws for OD measurement 0-150mm ±0.05mm 0.05mm Carbide-tipped jaws for OD & ID measurement 0-150mm * ±0.03mm 0.02mm High accuracy model 0-200mm ±0.05mm 0.05mm 0-200mm ±0.05mm 0.05mm Carbide-tipped jaws for OD measurement 0-200mm * ±0.03mm 0.02mm High accuracy model 0-300mm ±0.08mm 0.05mm 0-300mm ±0.08mm 0.05mm Carbide-tipped jaws for OD measurement 0-300mm * ±0.04mm 0.02mm High accuracy model: ±0.04mm 0-600mm ** ±0.1mm 0.05mm mm ** ±0.15mm 0.05mm ID measurement /Inch with metric/inch dual scale Range Order No. Accuracy Vernier Graduation Remarks Lower Scale Upper Scale 0-150mm / ±0.05mm 0.05mm 1/128" 0-150mm / ±0.05mm 0.05mm 1/128" 0-150mm / * ±0.03mm 0.02mm.001" High accuracy model 0-200mm ±0.05mm 0.05mm 1/128" 0-200mm * ±0.03mm 0.02mm.001" High accuracy model 0-300mm ±0.08mm 0.05mm 1/128" 0-300mm * ±0.04mm 0.02mm.001" High accuracy model Inch with inch/inch dual scale Range Order No. Accuracy Vernier Graduation Remarks Lower Scale Upper Scale 0-6" ± /128" 0-8" ± /128" Step measurement Depth measurement D-11

12 Vernier Caliper SERIES 531 with Thumb Clamp loaded thumb clamp is depressed. Quadri (4 way) Measurement Measurement Applications Thumb clamp Range Order No. Accuracy Graduation Remarks 0-150mm ±0.05mm 0.05mm 0-200mm ±0.05mm 0.05mm 0-300mm ±0.08mm 0.05mm OD measurement /Inch with metric/inch dual scale Range Order No. Accuracy Graduation Remarks Lower Scale Upper Scale 0-150mm / 0-6" ±0.05mm 0.05mm 1/128" 0-150mm / 0-6" ±0.03mm 0.02mm.001 High accuracy model 0-200mm / ±0.05mm 0.05mm 1/128" 0-200mm / ±0.03mm 0.02mm.001 High accuracy model 0-300mm / ±0.08mm 0.05mm 1/128" 0-300mm / ±0.04mm 0.02mm.001 High accuracy model ID measurement AND MASS Step measurement Range L a b c d Mass (g) 0-6"/ 0-150mm "/ 0-200mm mm Depth measurement D-12

13 Vernier Caliper SERIES 532 with Fine Adjustment Quadri (4 way) Measurement Measurement Applications OD measurement Range Order No. Accuracy Graduation 0-130mm ±0.03mm 0.02mm 0-180mm ±0.03mm 0.02mm 0-280mm ±0.04mm 0.02mm ID measurement /Inch with metric/inch dual scale Range Order No. Accuracy Graduation Lower Scale Upper Scale 0-130mm / ±0.03mm 0.02mm.001" 0-180mm / ±0.03mm 0.02mm.001" 0-280mm / ±0.04mm 0.02mm.001" Inch with inch/inch dual scale Range Order No. Accuracy Graduation Lower Scale Upper Scale 0-5" ± /128" 0-7" ± /128" 0-11" ± /128" Step measurement AND MASS Depth measurement Range L a b c d Mass (g) 0-5" / 0-130mm " / 0-180mm " / 0-280mm D-13

14 Vernier Caliper SERIES 160 with Nib Style Jaws and Fine Adjustment accurate ID measurement. directly read from the upper and lower Except 12 / 300mm, 18 / 450mm and 24 / 600mm supplied in wooden case with metric/metric dual scale Order No. Accuracy Graduation Mass (g) Lower Scale Upper Scale 0 (10) - 300mm ±0.04mm 0.02mm 0.02mm (20) - 450mm ±0.05mm 0.02mm 0.02mm 1,200 0 (20) - 600mm ±0.05mm 0.02mm 0.02mm 2,600 0 (20) mm ±0.07mm 0.02mm 0.02mm 3,500 0 (20) mm ±0.09mm 0.02mm 0.02mm 4,850 0 (20) mm ±0.12mm 0.02mm 0.02mm 10,200 /Inch with metric/inch dual scale Order No. Accuracy Graduation Mass (g) Lower Scale Upper Scale 0 (10) - 300mm / 0 (.3 ) - 12" ±0.04mm 0.02mm (20) - 450mm / 0 (.5 ) - 18" ±0.05mm 0.02mm.001 1,200 0 (20) - 600mm / 0 (.5 ) - 24" ±0.05mm 0.02mm.001 1,400 0 (20) mm / 0 (1 ) - 40" ±0.07mm 0.02mm.001 3,500 0 (20) mm / 0 (1 ) - 60" ±0.09mm 0.02mm.001 4,850 0 (20) mm / 0 (1 ) - 80" ±0.12mm 0.02mm ,200 Inch with inch/inch dual scale Order No. Accuracy Graduation Mass (g) Lower Scale Upper Scale 0 (.3 ) - 12" ±.0015" (.5 ) - 18" ±.002" ,200 0 (.5 ) - 24" ±.002" ,400 0 (1 ) - 40" ±.003" ,500 0 (1 ) - 60" ±.004" ,850 0 (1 ) - 80" ±.005" ,200 Inch/ with inch/metric dual scale Order No. Accuracy Graduation Mass (g) Lower Scale Upper Scale 0 (.3 ) - 12" / 0 (10) - 300mm ±.0015" mm (.5 ) - 18" / 0 (20) - 450mm ±.002" mm 1,200 0 (.5 ) - 24" / 0 (20) - 600mm ±.002" mm 1,400 0 (1 ) - 40" / 0 (20) mm ±.003" mm 3,500 0 (1 ) - 60" / 0 (20) mm ±.004" mm 4,850 0 (1 ) - 80" / 0 (20) mm ±.005" mm 10,200 Round surface of jaws for accurate ID measurement Range L a b c d e 0-12 / 0-300mm / 0-450mm / 0-600mm / mm / mm / mm D-14

15 ABSOLUTE Digimatic & Vernier Caliper SERIES 550, 160 with Nib Style Jaws accurate ID (inside diameter) measurement. directly read from the upper and lower slider graduations (Series 160). (Series 160). 1000mm supplied in wooden case. linear encoder Function of Digital Model Origin-set, Zero-setting, Data output, Optional Accessories for Digital Model : Data hold unit : SPC cable with data switch (40 / 1m) : SPC cable with data switch (80 / 2m) 05CZA624: SPC cable with data switch (40 / 1m) for IP67 model 05CZA625: SPC cable with data switch (80 / 2m) for IP67 model Digital model Order No. Accuracy Resolution Mass (g) Remarks 0 (10) - 200mm ±0.03mm 0.01mm 180 IP67 0 (10) - 300mm ±0.03mm 0.01mm 380 w/ offset/preset function for easy ID measurement, IP67 0 (20) - 450mm ±0.05mm 0.01mm 1,110 0 (20) - 600mm ±0.05mm 0.01mm 1,290 0 (20) mm ±0.07mm 0.01mm 3,350 Inch/ Digital model Order No. Accuracy Resolution Mass (g) Remarks 0 (.4 ) - 8" / 0 (10) - 200mm ±.001".0005 / 0.01mm 180 IP67 0 (.4 ) - 12" / 0 (10) - 300mm ±.0015".0005 / 0.01mm 380 w/ offset/preset function for easy ID measurement, IP67 0 (.5 ) - 18" / 0 (20) - 450mm ±.002".0005 / 0.01mm 1,110 0 (.5 ) - 24" / 0 (20) - 600mm ±.002".0005 / 0.01mm 1,290 0 (1 ) - 40" / 0 (20) mm ±.003".0005 / 0.01mm 3,350 with metric/metric dual scale Order No. Accuracy Graduation Mass (g) Remarks 0 (20) - 450mm ±0.10mm 0.02mm 1,100 0 (20) - 600mm ±0.10mm 0.02mm 1,300 0 (20) mm ±0.15mm 0.02mm 3,350 0 (20) mm ±0.22mm 0.05mm 4,850 0 (20) mm ±0.28mm 0.05mm 10,000 Round surface of jaws for accurate ID measurement ( ): Digital models Range L a b d 0-8"/ 0-200mm 288 (290) " / 0-300mm " / 0-450mm " / 0-600mm " / mm D-15

16 Long Jaw Vernier Caliper SERIES 534 features Order No. Accuracy Graduation Mass (g) Lower Scale Upper Scale 0 (10) - 300mm ±0.07mm 0.05mm 0.05mm (20) - 500mm ±0.13mm 0.05mm 0.05mm 1,400 with metric/metric dual scale Order No. Accuracy Graduation Mass (g) Lower Scale Upper Scale 0 (10) - 300mm ±0.04mm 0.02mm 0.02mm (20) - 500mm ±0.06mm 0.02mm 0.02mm 1,500 0 (20) - 750mm ±0.08mm 0.02mm 0.02mm 2,900 0 (20) mm ±0.10mm 0.02mm 0.02mm 3,500 /Inch with metric/inch dual scale Order No. Accuracy Graduation Mass (g) Lower Scale Upper Scale 0 (10) - 300mm / 0 (.3 ) - 12" ±0.07mm 0.05mm 1/ (10) - 300mm / 0 (.3 ) - 12" ±0.04mm 0.02mm (20) - 500mm / 0 (.8 ) - 20" ±0.13mm 0.05mm 1/128 1,500 0 (20) - 500mm / 0 (.8 ) - 20" ±0.06mm 0.02mm.001 1,500 0 (20) - 700mm / 0 (.8 ) - 30" ±0.16mm 0.05mm 1/128 2,900 0 (20) - 700mm / 0 (.8 ) - 30" ±0.08mm 0.02mm.001 2,900 0 (20) mm / 0 (.8 ) - 40" ±0.20mm 0.05mm 1/128 3,500 0 (20) mm / 0 (.8 ) - 40" ±0.10mm 0.02mm.001 3,500 Inch with inch/inch dual scale Order No. Accuracy Graduation Mass (g) Lower Scale Upper Scale 0 (.3 ) - 12" ±.002" (.8 ) - 20" ±.003" (.8 ) - 30" ±.004" (.8 ) - 40" ±.004" Range L a b c d e 0-12 / 0-300mm / 0-500mm / 0-750mm / mm Round surface of jaws for accurate CD measurement D-16

17 ABSOLUTE Digimatic & Vernier Caliper SERIES 551 with Nib Style and Standard Jaws accurate ID (inside diameter) measurement. 18" / 450mm and larger supplied wooden case. Resolution: 0.01mm or.0005"/0.01mm Display: LCD Length standard: ABSOLUTE electrostatic capacitance type linear encoder Max. response speed: Unlimited Battery: SR44 (1 pc.), Battery life: Approx. 3.5 years under normal use Function of Digital Model Origin-set, Zero-setting, Data output, Optional Accessories for Digital Model 05CZA624: SPC cable with data switch (1m / 40 ) 05CZA625: SPC cable with data switch (2m / 80 ) Digital model Order No. Accuracy Resolution Mass (g) Remarks 0 (10) - 200mm ±0.03mm 0.01mm 180 IP67 0 (10) - 300mm ±0.04mm 0.01mm 380 with offset/preset function for easy ID measurement, IP67 0 (20) - 500mm ±0.06mm 0.01mm 1,060 0 (20) - 750mm ±0.06mm 0.01mm 1,410 0 (20) mm ±0.07mm 0.01mm 3,430 Inch/ Digital model Order No. Accuracy Resolution Mass (g) Remarks 0 (.4 ) - 8" / 0 (10) - 200mm ±.001".0005 / 0.01mm 180 IP67 0 (.4 ) - 12" / 0 (10) - 300mm ±.002".0005 / 0.01mm 380 w/ offset/preset function for easy ID measurement, IP67 0 (.5 ) - 20" / 0 (20) - 500mm ±.0025".0005 / 0.01mm 1,060 0 (.5 ) - 30" / 0 (20) - 750mm ±.0025".0005 / 0.01mm 1,410 0 (1 ) - 40" / 0 (20) mm ±.003".0005 / 0.01mm 3,430 Round surface of jaws for accurate ID measurement R d a b c Range a b c d R 0-8" / 0-200mm " / 0-300mm " / 0-500mm " / 0-750mm " / mm D-17

18 Digimatic Carbon Fiber Caliper SERIES 552 with optional jaw attachments CFRP (Carbon Fiber Reinforced Plastics) in the beam and jaws. by using the optional attachments. pressing the Offset key.) starting point. and magnetic products. Resolution:.0005 /0.01mm or 0.01mm Display: LCD Length standard: Electrostatic capacitance type linear encoder Max. response speed: 1600mm/s Battery: SR44 (1 pc.), Battery life: Approx. 3,000 hours in continuous use Order No. Accuracy Resolution Remarks 0(20)-450mm /-0.04mm 0.01mm 0(20)-450mm /-0.06mm 0.01mm long jaws 200mm 0(20)-450mm /-0.04mm 0.01mm ceramic jaws 0(20)-600mm /-0.04mm 0.01mm 0(20)-600mm /-0.06mm 0.01mm long jaws 200mm 0(20)-600mm /-0.04mm 0.01mm ceramic jaws 0(20)-1000mm /-0.05mm 0.01mm 0(20)-1000mm /-0.07mm 0.01mm long jaws 200mm 0(20)-1500mm /-0.09mm 0.01mm 0(20)-1500mm /-0.11mm 0.01mm long jaws 200mm 0(20)-2000mm /-0.12mm 0.01mm 0(20)-2000mm /-0.14mm 0.01mm long jaws 200mm Function Origin-set, Zero-setting, Presetting, Offsetting, Data hold, Data output, ) Optional Accessories 05CZA624: SPC cable with data switch (40 / 1m) 05CZA625: SPC cable with data switch (80 / 2m) : Attachment clamps (for models up to 24 / 600mm range) / 600mm range) type. Inch/ Order No. Accuracy Resolution Remarks 0(.5 ) / /0.01mm 0(.5 ) / /0.01mm long jaws 7.9 0(.5 ) / /0.01mm ceramic jaws 0(.5 ) / /0.01mm 0(.5 ) / /0.01mm long jaws 7.9 0(.5 ) / /0.01mm ceramic jaws 0(1 ) / /0.01mm 0(1 ) / /0.01mm long jaws 7.9 0(1 ) / /0.01mm 0(1 ) / /0.01mm long jaws 7.9 0(1 ) / /0.01mm 0(1 ) / /0.01mm long jaws 7.9 Centerline Attachments Pointed ID Measuring Attachments Attachment Clamps D-18

19 Ceramic jaws Centerline attachments ID point attachments AND MASS Pointed ID Measuring Attachments Centerline Attachments Standard models, Ceramic jaw models 10 Range L a b c d e f Mass (g) 0-18" / 0-450mm (.25") " /0-600mm (.25") " / mm (.5") 1, " / mm (.5") 2, " / mm (.5") 2,560 ( ): inch/mm models 10 Long jaw models Range L a b c d e f Mass (g) 0-18" / 0-450mm (.25") 1, " / 0-600mm (.25") 1, " / mm (.5") 2, " / mm (.5") 2, " / mm (.5") 2,890 ( ): inch/mm models 40 D-19

20 ABSOLUTE Coolant Proof Carbon Fiber Caliper SERIES 552 with Interchangeable Jaws by using interchangeable jaws (optional). clamping wheels is a standard accessory.) desired starting point, which allows direct readout of offset measurements with optional interchangeable jaws Inch/ Range Order No. Accuracy 0-18" / 0-450mm ±.002" 0-24" / 0-600mm ±.002" 0-40" / mm ±.002" 0-60" / mm ±.004" 0-80" / mm ±.005" Interchangeable Jaws (Optional) Standard type Inside point type Standard Type Order No. Components a b 07CZA056 Right (07CAA044), Left (07CAA045) 28mm (1.1") 30mm (1.2") Resolution:.0005"/0.01mm Display: LCD Scale type: ABSOLUTE electromagnetic linear encoder Max. response speed: Unlimited Battery: SR44 (1 pc.), Battery life: Approx. 5,000 hours in continuous use Standard accessory: Jaw clamps (2 pcs.), 05GZA033 Inside Point Type Surface Plate Type Scriber Type Order No. Components a b 07CZA058 07CZA041 x 2pcs. 25mm 50mm 07CZA059 07CZA048 x 2pcs. 1" 2" Scriber Type Order No. Components a b 07CZA055 Right (07CZA042), 8mm 30mm Left (07CZA043) 07CZA061 Right (07CZA042), Left (07CZA049) 031" 1.2" Centerline Type Surface Plate Type Order No. a b 07CZA " / 90mm 1.1" / 28mm Centerline Type Order No. Components a b 07CZA057 07CZA039 x 2pcs. 30mm 30mm 07CZA060 07CZA047 x 2pcs. 1.2" 1.2" Functions Origin-set, Zero-setting, Presetting, Offsetting, Data hold, (inch/mm models) Optional Accessories 05CZA624: SPC cable with data switch (40 / 1m) 05CZA625: SPC cable with data switch (80 / 2m) 02AZD790A D-20

21 ABSOLUTE Back-Jaw Centerline Caliper SERIES 573 Center-to-Center & Edge-to-Center Types between two centers or the distance from an edge to center. slider, measurements can be read easily by looking down. function. Resolution: 0.01mm Display: LCD linear encoder Max. response speed: Unlimited Battery: SR44 (1 pc.), Battery life: Approx. 3.5 years under normal use Function Origin-set, Zero-setting, Power On/Off, Data output, Optional Accessories : Data hold unit : SPC cable with data switch (1m) : SPC cable with data switch (2m) (Center-to-center type) (Edge-to-center type) Center-to-center distance type Range Order No. Accuracy Resolution Mass (g) mm ±0.10mm 0.01mm mm ±0.15mm 0.01mm 578 Edge-to-center distance type Range Order No. Accuracy Resolution Mass (g) mm ±0.10mm 0.01mm mm ±0.15mm 0.01mm / / D-21

22 Offset Caliper SERIES 573, 536 ABSOLUTE Digimatic and Vernier Type facilitate measurement of stepped sections. (Hard-to-get-at dimensions such as A, B, C can be accurately measured.) Range Digital model Order No. Accuracy Resolution Mass (g) 0-150mm ±0.02mm 0.01mm mm ±0.02mm 0.01mm mm ±0.03mm 0.01mm linear encoder Function of Digital Model Origin-set, Zero-setting, Power On/Off, Data output, ) Optional Accessories for Digital Model 05CZA624: SPC cable with data switch (40 / 1m ) 05CZA625: SPC cable with data switch (80 / 2m) Range Order No. Accuracy Graduation Mass (g) 0-150mm ±0.05mm 0.05mm mm ±0.05mm 0.05mm mm ±0.08mm 0.05mm 400 Inch/ Digital model Range Order No. Accuracy Resolution Mass (g) 0-6" / 0-150mm ±.001".0005 / 0.01mm " / 0-200mm ±.001".0005 / 0.01mm " / 0-300mm ±.0015".0005 / 0.01mm 350 Range a b c d 0-6 / 0-150mm (30) 0-8 / 0-200mm (38.5) 0-12 / 0-300mm ( ) Digital Model D-22

23 Offset Centerline Caliper SERIES 573, 536 ABSOLUTE Digimatic and Vernier Type distance measurements on the same and offset planes. 1.5mm - 10mm (.06" -.4"). linear encoder Function of Digital Model Origin-set, Zero-setting, Power On/Off, Data output, Optional Accessories for Digital Model 05CZA624: SPC cable with data switch (40 / 1m) 05CZA625: SPC cable with data switch (80 / 2m) Range Digital model Order No. Accuracy Resolution Mass (g) mm ±0.03mm 0.01mm mm ±0.03mm 0.01mm mm ±0.04mm 0.01mm 320 Inch/ Digital model Range Order No. Accuracy Resolution Mass (g).4-6" / mm ±.0015".0005 / 0.01mm " / mm ±.0015".0005 / 0.01mm " / mm ±.0015".0005 / 0.01mm 320 Range Order No. Accuracy Graduation Mass (g) mm ±0.05mm 0.05mm mm ±0.05mm 0.05mm mm ±0.08mm 0.05mm Range a t 0-6 / 0-150mm / 0-200mm / 0-300mm D-23

24 Point Caliper SERIES 573, 536 ABSOLUTE Digimatic and Vernier Type to obtain Range Digital model Order No. Accuracy Resolution Mass (g) 0-150mm ±0.02mm 0.01mm mm ±0.02mm 0.01mm 163 Inch/ Digital model Range Order No. Accuracy Resolution Mass (g) 0-6" / 0-150mm ±.001".0005 / 0.01mm " / 0-150mm ±.001".0005 / 0.01mm 163 Range Order No. Accuracy Graduation Mass (g) 0-150mm ±0.05mm 0.05mm 150 linear encoder Function of Digital Model Origin-set, Zero-setting, Power On/Off, Data output, Optional Accessories for Digital Model 05CZA624: SPC cable with data switch (40 / 1m) 05CZA625: SPC cable with data switch (80 / 2m) , , D-24

25 Blade Type Caliper SERIES 573, 536 ABSOLUTE Digimatic and Vernier Type linear encoder Function of Digital Model Origin-set, Zero-setting, Power On/Off, Data output, Optional Accessories for Digital Model 05CZA624: SPC cable with data switch (40 / 1m) 05CZA625: SPC cable with data switch (80 / 2m) outside measurements far easier to obtain. tipped Range Digital model Order No. Accuracy Resolution Mass (g) 0-150mm ±0.02mm 0.01mm 168 Inch/ Digital model Range Order No. Accuracy Resolution Mass (g) 0-6" / 0-150mm ±.001".0005 / 0.01mm 168 Range Order No. Accuracy Graduation Mass (g) 0-150mm ±0.05mm 0.05mm mm ±0.05mm 0.05mm mm ±0.08mm 0.05mm t a 40 c b Vernier model Digital model Range a b c t 0-6 / 0-150mm mm mm D-25

26 Neck Caliper SERIES 573, 536 ABSOLUTE Digimatic and Vernier Type inside bores and recesses. recesses Point jaw type Range Digital model Order No. Accuracy Resolution Mass (g) 0-150mm ±0.03mm 0.01mm mm * ±0.03mm 0.01mm 157 linear encoder Function of Digital Model Origin-set, Zero-setting, Power On/Off, Data output, Optional Accessories for Digital Model 05CZA624: SPC cable with data switch (1m / 40 ) 05CZA625: SPC cable with data switch (2m / 80 ) Inch/ Range Digital model Order No. Accuracy Resolution Mass (g) 0-6" / 0-150mm ±.0015".0005 / 0.01mm " / 0-150mm * ±.0015".0005 / 0.01mm 157 Range Order No. Accuracy Graduation Mass (g) 0-150mm ±0.05mm 0.05mm mm * ±0.05mm 0.05mm , Point jaw type Point jaw type , D-26

27 Tube Thickness Caliper SERIES 573, 536 ABSOLUTE Digimatic and Vernier Type facilitates measurements of tube wall thickness. Length standard: ABSOLUTE electrostatic capacitance type linear encoder Function of Digital Model Origin-set, Zero-setting, Power On/Off, Data output, ) Optional Accessories for Digital Model 05CZA624: SPC cable with data switch (40 / 1m) 05CZA625: SPC cable with data switch (80 / 2m) Digital model Range Order No. Accuracy Resolution 0-150mm ±0.05mm 0.01mm AND MASS Inch/ Digital model Range Order No. Accuracy Resolution 0-6" / 0-150mm ±.002".0005" / 0.01mm Range Order No. Accuracy Graduation 0-150mm ±0.05mm 0.05mm (32) 40 Mass: 150g Vernier model ø3 231 (32) Mass: 167g Digital model ø3 D-27

28 ABSOLUTE Low Force Caliper SERIES 573 calipers are ideal for elastic or resilient workpieces such as plastic parts and AND MASS rubber parts that standard calipers cannot measure Range Order No. Accuracy Resolution Mass (g) 0-180mm ±0.05mm 0.01mm 253 Inch/ Range Order No. Accuracy Resolution Mass (g) 0-7" / 0-180mm ±.002".0005 / 0.01mm 253 Resolution:.0005 /0.01mm or 0.01mm Display: LCD Length standard: ABSOLUTE electrostatic capacitance type linear encoder Measuring force: 0.49N to 0.98N (50gf to 100gf) Jaw retraction: 0.3mm Max. response speed: Unlimited Battery: SR44 (1 pc.), Battery life: Approx. 3.5 years under normal use Function Origin-set, Zero-setting, Power On/Off, Data output, Optional Accessories : Data hold unit : SPC cable with data switch (40 / 1m) : SPC cable with data switch (80 / 2m) Mass: 253g Measurement procedures ABSOLUTE Snap Caliper SERIES 573 features a spring-loaded mechanism to inspection for mass production parts. To measure resilient workpieces take the measurement when the pointer is between the two index lines AND MASS Range Order No. Accuracy Resolution Mass (g) 0-100mm ±0.02mm 0.01mm mm ±0.02mm 0.01mm 233 Inch/ Range Order No. Accuracy Resolution Mass (g) 0-4 / 0-100mm ±.001".0005 / 0.01mm " / 0-150mm ±.001".0005 / 0.01mm 233 Range L a b c d Mass (g) 0-100mm mm Resolution:.0005 /0.01mm or 0.01mm Repeatability:.0005 / 0.01mm Display: LCD Length standard: ABSOLUTE electrostatic capacitance type linear encoder Measuring force: 7N to 14N (700gf to 1400gf) Jaw retraction: 2mm Max. response speed: Unlimited Battery: SR44 (1 pc.), Battery life: Approx. 3.5 years under normal use Function Origin-set, Zero-setting, Power On/Off, Data output, ) Optional Accessories : Data hold unit : SPC cable with data switch (40 / 1m) : SPC cable with data switch (80 / 2m) D-28

29 Scribing Caliper SERIES 573, 536 ABSOLUTE Digimatic and Vernier Type scribing on workpiece. Display: LCD Length standard: ABSOLUTE electrostatic capacitance type linear encoder Max. response speed: Unlimited Battery: SR44 (1 pc.), Battery life: Approx. 3.5 years under normal use Function Origin-set, Zero-setting, Power On/Off, Data output, Optional Accessories 05CZA624: SPC cable with data switch (40 / 1m) 05CZA625: SPC cable with data switch (80 / 2m) Range Digital model Order No. Accuracy Resolution Mass (g) 0-150mm ±0.02mm 0.01mm mm ±0.02mm 0.01mm mm ±0.03mm 0.01mm 345 Range Vernier type Order No. Accuracy Graduation Mass (g) 0-150mm ±0.05mm 0.05mm mm ±0.05mm 0.05mm mm ±0.08mm 0.05mm 355 Range L a b c d e 0-150mm mm mm D-29

30 ABSOLUTE Inside Caliper SERIES 573, 536 Knife-edge/Inside Groove/Point Jaw Type in hard-to-reach places. Knife-edge type 18 / 450mm and 24 / 600mm supplied in wooden case Inside groove type linear encoder Function of Digital Model Origin-set, Zero-setting, Power On/Off, Data output, Point jaw type Optional Accessories for Digital Model 05CZA624: SPC cable with data switch (40 / 1m) 05CZA625: SPC cable with data switch (80 / 2m) Digital model Range Order No. Accuracy Remarks Mass (g) mm ±0.05mm Knife-edge type, Measurable min. hole diameter: ø10mm mm ±0.05mm mm ±0.03mm Point jaw type, Measurable min. hole diameter: ø20mm 157 Inch/ Digital model Range Order No. Accuracy Remarks Mass (g).4" - 8" / mm ±.002" Knife-edge type, Measurable min. hole diameter: ø.4" 227.4" - 6" / mm ±.002" 147.8" - 6" / mm ±.0015" Point jaw type, Measurable min. hole diameter: ø.8" 157 Range Order No. Accuracy Remarks Mass (g) mm ±0.12mm Knife-edge type, Measurable min. hole diameter: ø10mm mm ±0.05mm mm ±0.05mm Point jaw type, Measurable min. hole diameter: ø20mm mm ±0.08mm Point jaw type, Measurable min. hole diameter: ø30mm mm ±0.10mm Point jaw type, Measurable min. hole diameter: ø70mm 1, mm ±0.12mm Point jaw type, Measurable min. hole diameter: ø70mm 1,430 D-30

31 AND MASS Knife-edge type Mass: 210g Mass: 223g / (D) (H) Mass: 130g Mass: 143g / (H) R5 R5 R5 R5 3 (I) 3 a c (d) ø0.5 (ø1) b 16 X X Section X X Section X X ø X X Inside groove type 25 Point jaw type g f e 60 ø2.4(ø5) ø2.4 Order No. Range a b c d e f g Mass (g) mm mm mm , mm ,430 Mass: 153g / D-31

32 MyCAL-Lite SERIES 700 Digital Caliper for DIY tool for DIY. readout of measurements. Inch/ Range Order No. Accuracy Mass (g) 0-6 / 0-150mm ±.005 / ±0.2mm / 0-200mm ±.005 / ±0.2mm (287) 16 Resolution:.001 / 0.1mm Display: LCD Length standard: Electrostatic capacitance type linear encoder Max. response speed: 1800mm/s Battery: SR44 (1 pc.), Function Zero-setting, Power on/off 40 ( ): 8" Model Plastic Caliper SERIES 700 Digital Caliper for DIY lightweight use Resolution:.001 /0.1mm or 0.1mm Display: LCD Length standard: Electrostatic capacitance type linear encoder Max. response speed: 1800mm/s Battery: SR44 (1 pc.), Battery life: Approx. 2 years under normal use Range Order No. Accuracy 0-150mm ±0.2mm 0-150mm * ±0.5mm Inch/ Range Order No. Accuracy 0-6 / 0-150mm ±.008" / ±0.2mm Function Zero-setting, Power on/off D-32

33 Center Line Gage Optional Accessories for Caliper Pairs of conical probes are specially designed for measure centerline distances. L Application for 4, 6 and 8 Vernier, Application for 12 Vernier, Dial and Digimatic Center Line Gage Order No. Description For 4, 6 and 8 Calipers For 12 Calipers A B C A B C Depth Base Attachment Optional Accessories for Caliper measuring bar. locking clamp. Inch/ Size Order No. Remarks (applicable measuring range of caliper) 3 / 75mm , 6, 8 / 100mm, 150mm, 200mm 4 / 100mm , 6, 8 / 100mm, 150mm, 200mm 5 / 125mm / 300mm Depth base attachment Size a b c d e t 3 / 75mm / 100mm / 125mm t: Base thickness D-33

34 Digimatic Height Gage SERIES 192 Multi-Function Type with SPC Data Output measurement. Switchable resolution. Inch/ accurately measure steps, inside width, and outside width. Two preset reference height. Range Order No. Accuracy Resolution Mass (kg) 0-12 /0-300mm ± (0.01mm) 5.7 [.0002 (0.005mm) Switchable)] 0-18 /0-450mm ± (0.01mm) 7.5 [.0002 (0.005mm) Switchable)] 0-24 /0-600mm ± (0.01mm) [.0002 (0.005mm) Switchable)] /0-1000mm ± (0.01mm) [.0002 (0.005mm) Switchable)] 15.7 Range Order No. Accuracy Resolution Mass (kg) 0-300mm ±0.02mm Switchable between 0.01mm 5.7 and 0.005mm 0-600mm ±0.04mm Switchable between 0.01mm 8.3 and 0.005mm mm ±0.06mm Switchable between 0.01mm 15.7 and 0.005mm Resolution: mm or (0.01mm) [ (0.005mm) switchable] Display: LCD, 7-digits, character height 11mm Max. response speed: 500mm/s Battery: SR44 (1 pc.), Battery life: Approx hours under normal use Function Zero-setting, ABS/INC switching, Two presets, Probe tip diameter compensation, -/+ switching, Power ON/OFF, Data hold, Data output, Standard Scriber Provided models: Carbide-tipped scriber (905200) and scriber clamp (05GZA033) Inch/ models: Carbide-tipped scriber (905201) and scriber clamp (901385) Optional Accessories : SPC cable (40 / 1m) : SPC cable (80 / 2m) : SPC cable (L-shape, 40 / 1m) : SPC cable (L-shape, 80 / 2m) : Bi-directional touch-signal probe (metric) : Bi-directional touch-signal probe (inch) : Holding bar for test indicator (length: 50mm) : Holding bar for test indicator (length: 100mm) : Holding bar for test indicator (length: 2 ) : Holding bar for test indicator (length: 4 ) Shown with optional touch-signal probe 0-12 / 0-300mm, 0-18, 0-24 / 0-600mm 0-40 / mm Power ON/OFF Zero/ABS Hold/Data 9 c 65 d a b Range a b c d 0-12"/ 0-300mm "/ 0-450mm "/ 0-600mm Preset -/+ Switching in/mm D-34

35 Digimatic Height Gage SERIES 192 Standard Type with SPC Data Output Resolution:.0005 (0.01mm) [.0002 (0.005mm)] or 0.01mm and 0.005mm Display: LCD, 7-digit, character height 11mm Max. response speed: 500mm/s Battery: SR44 (1 pc.), Battery life: Approx hours under normal use Function Zero-setting, ABS/INC switching, Two presets, Probe tip diameter compensation, -/+ switching, Power ON/OFF, Data hold, No Output, Standard Scriber Provided models: Carbide-tipped scriber (07GZA000) and scriber clamp (05GZA033) Inch/ models: Carbide-tipped scriber (900258) and scriber clamp (901385) Optional Accessories : Holding bar for test indicator (length: 50mm) : Holding bar for test indicator (length: 100mm) : Holding bar for test indicator (length: 2 ) : Holding bar for test indicator (length: 4 ) measuring accuracy Inch/ Range Order No. Accuracy Resolution Mass (kg) 0-12 /0-300mm ± (0.01mm) 4.7 [.0002 (0.005mm) Switchable)] 0-18 /0-450mm ± (0.01mm) 7.5 [.0002 (0.005mm) Switchable)] 0-24 /0-600mm ± (0.01mm) [.0002 (0.005mm) Switchable)] /0-1000mm ± (0.01mm) [.0002 (0.005mm) Switchable)] 15.7 Range Order No. Accuracy Resolution Mass (kg) 0-300mm ±0.02mm Switchable between 0.01mm 4.7 and 0.005mm 0-600mm ±0.05mm Switchable between 0.01mm 8.3 and 0.005mm mm ±0.07mm Switchable between 0.01mm 15.7 and 0.005mm 0-12 / 0-300mm, 0-18, 0-24 / 0-600mm 0-40 / mm e f 9 c 65 g d a b Range a b c d e f g 0-12"/ 0-300mm "/ 0-450mm "/ 0-600mm D-35

36 Dial Height Gage SERIES 192 with Digital Counter and down digital counters as well as a dial. feeding. any scriber position. Dial reading: 0.01mm or.001 Standard Scriber Provided models: Carbide-tipped scriber (07GZA000) and scriber clamp (05GZA033) Inch/ models: Carbide-tipped scriber (900258) and scriber clamp (901385) Dimension of scriber 213 d e g h f 32 9 j i c ø Range Order No. Accuracy Graduation Mass (kg) 0-300mm ±0.03mm 0.01mm mm ±0.05mm 0.01mm mm ±0.05mm 0.01mm mm ±0.07mm 0.01mm 17.0 Inch Range Order No. Accuracy Graduation Mass (kg) 0-12" ±.0015" " ±.002" " ±.002" " ±.003" Optional Accessories : Holding bar for test indicator (length: 50mm) : Holding bar for test indicator (length: 100mm) : Holding bar for test indicator (length: 2 ) : Holding bar for test indicator (length: 4 ) / 0-300mm, 0-18 / 0-450mm 0-40 / mm 0-24 / 0-600mm 40 Comfortable grip base 60 Easy and secure clamping a b Range a b c d e f g h i j 0-12"/ 0-300mm ø "/ 0-450mm ø "/ 0-600mm ø20 38 Easy and error free reading D-36

37 ABSOLUTE Digimatic Height Gage SERIES 570 with ABSOLUTE Linear Encoder Resolution:.0005 / 0.01mm or 0.01mm Display: LCD, 6-digit Length standard: ABSOLUTE electrostatic capacitance type linear encoder Max. response speed: Un limited Battery: SR44 (1 pc.), Battery life: Approx hours under normal use This encoder eliminates the necessity of Function Origin setting, ABS/INC switching, Presetting, -/+ switching, Data hold, Data output, Standard Scriber Provided models: Carbide-tipped scriber (900173/905200*) and scriber clamp (901338/05GZA033*) Inch/ models: Carbide-tipped scriber (900173/905201*) and scriber clamp (901338/901385*) Range Order No. Accuracy Resolution Mass (kg) 0-200mm ±0.03mm 0.01mm mm ±0.07mm 0.01mm 16.8 Inch/ Range Order No. Accuracy Resolution Mass(kg) 0-8" / ±.001".0005 / mm 0.01mm 0-40" / mm ±.003".0005 / 0.01mm 16.8 Dimension of scriber / mm / 0-200mm Parts No. L a b c Optional Accessories : SPC cable (40 / 1m) : SPC cable (80 / 2m) : Holding bar for test indicator (length: 50mm) : Holding bar for test indicator (length: 2 ) D-37

38 ABSOLUTE Digimatic Height Gage SERIES 570 with ABSOLUTE Linear Encoder This encoder eliminates the necessity of measuring accuracy. Resolution:.0005 /0.01mm or 0.01mm Display: LCD, 6-digit Length standard: ABSOLUTE electrostatic capacitance type linear encoder Max. response speed: Un limited Battery: SR44 (1 pc.), Battery life: Approx hours under normal use Function Origin setting, ABS/INC switching, Power ON/OFF, Data hold, Data output, Standard Scriber Provided models: Carbide-tipped scriber (07GZA000), scriber clamp (05GZA033) Inch/ models: Carbide-tipped scriber (900258), scriber clamp (901385) Dimension of scriber Range Order No. Accuracy Resolution 0-300mm ±0.03mm 0.01mm 0-600mm ±0.05mm 0.01mm AND MASS Inch/ Range Order No. Accuracy Resolution 0-12" / 0-300mm ±.0015".0005 / 0.01mm 0-18" / 0-450mm ±.002".0005 / 0.01mm 0-24" / 0-600mm ±.002".0005 / 0.01mm Optional Accessories : SPC cable (40 / 1m) : SPC cable (80 / 2m) : Holding bar for test indicator (length: 50mm) : Holding bar for test indicator (length: 2 ) Large smooth slider feed wheel Range L a b c Mass (kg) 0-12 / 300mm / 450mm / 600mm Comfortable grip base D-38

39 Repeatability:.0001 / 0.001mm Resolution:.0001 /0.001mm or 0.001mm Display: LCD, 6-digit Power supply: Via AC adapter Function Zero-setting, Presetting, Probe tip diameter compensation, -/+ switching, Data hold, Data output, Heightmatic SERIES 574 High Precision Height Gage on the large LCD readout for accurate measurements. and reliability of measurement for the Heightmatic. Coarse feed knob Preset/Probe tip diameter compensation Data hold/ out put Touch-signal probe Fine feed wheel Inch/ Zero/ABS -/+ Switching Standard Accessories : Touch-Signal Probe : Scriber Clamp A: AC Adapter Dimensions of Optional Scribers Unit: mm Inch/ Range Order No. Accuracy Resolution 0-12" / 300mm A ±.0002".0001 / 0.001mm 0-18" / 450mm A ±.0002".0001 / 0.001mm 0-24" / 600mm A ±.0002".0001 / 0.001mm AND MASS A Optional Accessories : SPC cable (40 / 1m) : SPC cable (80 / 2m) : Carbide-tipped scriber (inch) : ø1mm contact point for touch-signal probe : ø2mm contact point for touch-signal probe Touch-Signal Probe (Standard accessory) Order No.: Range H Mass (kg) 0-12 / 300mm / 450mm / 600mm D-39

40 Vernier Height Gage SERIES 514 Standard Height Gage with Adjustable Main Scale reading. Main scale adjustment: 15mm or 25mm Standard Scriber Provided Up to 600mm: Carbide-tipped scriber (07GZA000) and scriber clamp (05GZA033) mm: Carbide-tipped scriber (905200) and scriber clamp (05GZA033) mm: Carbide-tipped scriber (900390) and scriber clamp (905008) Dimension of scriber Range Order No. Accuracy Graduation Mass (kg) 0-300mm ±0.04mm 0.02mm mm ±0.05mm 0.02mm mm ±0.05mm 0.02mm mm ±0.07mm 0.02mm mm ±0.18mm 0.02mm Parts No. L a b c Optional Accessories 07GZA003 07GZA : Holding bar for test indicator (length: 50mm) Inch/ Range Order No. Accuracy Graduation Mass (kg) 0-12 / 0-300mm ± / 0.02mm / 0-450mm ± / 0.02mm / 0-600mm ± / 0.02mm / mm ± / 0.02mm 20.0 Inch model with inch/metric dual scale 0-40 / mm mm d 45 Range L a b c d e mm mm mm mm a e b c L D-40

41 Vernier Height Gage SERIES 506 Light Weight Height Gage Standard Scriber Provided Carbide-tipped scriber (900173) and scriber clamp (901338) Dimension of scriber small parts. reading. steel. 0-8 / 0-200mm Optional Accessories : Holding bar for test indicator (length: 2 / 50mm) Range Order No. Accuracy Graduation Mass (kg) 0-200mm ±0.03mm 0.02mm 1.4 Inch/ Inch model with inch/metric double scale Range Order No. Accuracy Graduation Mass (kg) 0-8 / 0-200mm ± / 0.02mm D-41

42 Carbide-Tipped Scriber Optional Accessory for Height Gage each height gage. Order No. Remarks (applicable height gage) 07GZA Series Digimatic height gages ( , , ) 570 Series Digimatic Height Gages ( , ) 192 Series Dial Height Gages ( , , , ) 514 Series Vernier Height Gages ( , , , , , ) 574 Series Heightmatic ( , , ) Series Digimatic Height Gages ( , , ) 570 Series Digimatic Height Gages ( ) 514 Series Vernier Height Gages ( , ) Series Vernier Height Gage ( ) Inch Order No. Remarks (applicable height gage) Series Digimatic height gages ( , ) 506 Series Vernier Height Gages ( , , , , , ) 509 Series Vernier Height Gages ( , , , ) Series Digimatic Height Gages ( , , , ) 570 Series Digimatic Height Gages ( , , ) 574 Series Heightmatic ( , , ) Series Digimatic Height Gages ( , , , ) 570 Series Digimatic Height Gages ( ) Optional Accessories Optional Accessories for Height Gage Dimension of scriber Center Master center distance between holes. / ø1 - ø38mm. Order No.: (with metric type holding bar) (with inch type holding bar) Depth Gage Attachment holding bar to the contact point: 2.95 (inch type), 80mm (metric type) Order No.: (with inch type holding bar) (with metric type holding bar) Contact Sensor by jacking-up the height gage while workpiece, an indicator will light up to indicate that measurement can be taken, which will result in consistent height measurement. included. Order No.: D-42

43 CERA Caliper Checker SERIES 515 calipers. It is comprised of permanently wrung, high-grade CERA gage blocks in a perpendicular to a surface for height gage inspection. measuring blocks are corrosion resistant and dimensionally stable. Block pitch accuracy: ±0.005mm for range up to 300mm ±.0002 for range up to 12 ±0.007mm for range up to 600mm Parallelism of blocks: 0.002mm for range up to 300mm 0.004mm for range up to 600mm Optional Accessories Range Order No. Remarks (length to check) Mass (kg) 0-300mm Outside measurement: 20, 50, 100, 150, 200, 250, 300mm 4.0 Inside measurement: 20, 50, 100, 150, 200, 250, 300mm 0-600mm Outside, Inside measurement: 20, 50, 100, 150, 200, 250, 300, 350, 400, 450, 500, 550, 600mm 8.5 Inch Range Order No. Remarks (length to check) Mass (kg) Outside measurement: 1, 2, 4, 6, 8, 10, Inside measurement: 1, 2, 4, 6, 8, 10, 12 9 Outside measurement 300mm (12 ) 250mm (10 ) 200mm (8 ) 150mm (6 ) 100mm (4 ) 50mm (2 ) 20mm (1 ) Used for caliper 50 20mm (1 ) 50mm (2 ) 100mm (4 ) 150mm (6 ) 200mm (8 ) 250mm (10 ) 300mm (12 ) Inside measurement ( ) 0-600mm 9 Outside measurement 50mm 20mm 150mm 100mm 450mm 400mm 350mm 300mm 250mm 200mm 600mm 550mm 500mm Used for height gage mm 550mm 600mm 400mm 450mm 100mm 150mm 200mm 250mm 300mm 350mm mm 50mm Inside measurement D-43

44 Linear Height LH-600D SERIES 518 High Performance 2D Measurement System Excellent accuracy of ( L/600)μm with 0.1μm/0.5μm resolution/repeatability. Perpendicularity (frontal) of 5μm and straightness of 4μm are guaranteed. Pneumatic full/semi-floating system allows adjustment of air-cushion height. and, additionally, RS-232C / USB data measurement data externally with SPC software on a PC. with power grip One-key operation for running a semiautomatic measurement. Data entry from a Digimatic tool. Measuring range: 0-38 / 0-972mm Slider stroke: 24 / 600mm Resolution: / /.0001 /.001 or (switchable) / / 0.01 / 0.1mm / / / 0.01 / 0.1mm Floating method: Full / semi-floating with built-in air compressor Display: Graphic LCD (320x240 dot, with back light) Inch/ Order No A-21 (120V with English manual) Measuring Range (stroke) 0-38 (34 ) / 0-972mm(600mm) Resolution (selectable) / /.0001 /.001 / mm/0.001mm/0.01mm/0.1mm Accuracy Measuring accuracy Repeatability (2s) Plane: /0.4μm Bore: /0.9μm Perpendicularity.0002 /5μm Straightness.0002 /4μm Measuring Force 1N Balancing Method Counter balance Main Unit Floating Method Full/semi-floating with air Air Source Built-in air compressor LCD Graphic LCD (320 x 240 dot, with LED backlight) Language for Display English/German/French/Spanish/Italian/Japanese Number of Programs 50 (max.) Number of Datas 60,000 (max.) 1 program 30,000 (Max.) Power Supply AC Adapter/Battery (Ni-MH) Power Consumption 43VA Operation Time Approx. 5 hours Standard Accessories ø5 Eccentric probe (12AAF634) Probe diameter calibration block (12AAF715) Battery (12AAA712) AC adapter (357651) ) ) Mass 24kg A-21 SPC results Histogram Perpendicularity/measurement D-44

45 Optional Accessories 12AAC072: q Depth probe 12AAC073: w ø20mm taper probe 12AAA787: Block for calibrating probe diameter (applicable to taper probe) 12AAA792: e Dial indicator (ø8mm stem) holder 12AAA837: Dial indicator (ø3/8 stem) holder 12AAA793: r Probe extension holder (3.3 / 85mm) 12AAB136: ø10mm cylindrical probe : y 12AAF666: ø1mm ball probe 12AAF667: ø2mm ruby ball probe : i ø2mm ball probe : o ø3mm ball probe : a ø4mm ball probe 12AAB552 s 12AAF668 12AAF669 12AAF670: ø5mm disk probe 12AAF671: ø10mm disk probe : d ø14mm disk probe : f ø20mm disk probe 12AAF672: ø1mm ball offset probe 12AAA788: g ø4mm ball offset probe 12AAA789: h ø6mm ball offset probe : j Test indicator (ø6mm stem) adapter : k M2 CMM stylus adapter : l M3 CMM stylus adapter 12AAF712: Battery pack 12AAF675: Large capacity battery pack 12AAA797 Thermal printer (120V) 12AAA802 Thermal printing paper (10pcs.) 12AAA804 12AAA807 RS-232C cable 80 / 2m) 12AAA808 RS-232C cable (160 / 4m) 12AAH034 USB-Memory 12AAH035 USB-FDD q y e j s AND MASS w r a o d i f h l k g Mass:24kg D-45

46 QM-Height SERIES 518 High Precision ABSOLUTE Digital Height Gage resolution ABSOLUTE linear encoder for position detection. Easy reference icon keys. Possible to measure inside/outside the circle apex and process by tracing measurement). Various types of optional probes are Large size LCD with back light. GO/±NG judgment is performed by setting the upper and lower tolerances. If a judgment result is out of tolerance, the display backlighting changes from green to red, so tolerance judgment can be made at a glance. (for measurement). SPC and RS-232C output. Measuring range: or mm or 0-715mm Slider stroke: 14 / 350mm or 24 / 600mm Resolution: /.0001 /.0002 / / 0.005mm or / 0.005mm Guiding method: Roller bearing Length standard: ABSOLUTE electrostatic capacitance type linear encoder Measuring force: 1.6±0.5N Display: LCD Power supply: AC adapter (optional) / battery (LR6x4) Battery operation time: Approx. 260 hours (approx. 6 hours when using back light) GO Inch/ Order No Range 0-14 (0-350mm) 0-24 (0-600mm) Resolution.00005,.0001,.0002 / 0.001mm, 0.005mm Accuracy ± ( xL/ 40) Repeatability (2s) Display LCD Functions Zero setting, -/+ switching, Presetting, Data hold, Probe tip diameter Perpendicularity Measuring force 1.6 ± 0.5N Data output SPC, RS-232C Power supply AC adapter (optional accessory) / Battery (LR6x4) Battery Life Approx. 800 Hrs. (when backlight is not used) Standard Accessories ø5mm stepped probe (05HZA148) 4 pcs. AA Alkaline Batteries (LR6) Users Manual 99MAF017B Mass 22kg 27kg ±NG D-46

47 Optional Accessories 12AAC072: Depth probe 12AAA792: Dial indicator (ø8mm stem) holder 12AAA837: Dial indicator (ø3/8 stem) holder 12AAA793: Probe extension holder (3.3 / 85mm) 12AAF667: ø2mm ruby ball probe : ø2mm ball probe : ø3mm ball probe : ø4mm ball probe 05HAA394: ø5mm ball probe (for 05HZA148) 12AAB552 12AAF670: ø5mm disk probe 12AAF671: ø10mm disk probe : ø14mm disk probe : ø20mm disk probe 12AAA788: ø4mm ball offset probe 05HAA394: ø5mm ball offset probe 12AAA789: ø6mm ball offset probe : Test indicator (ø6mm stem) adapter 05HZA173: Scriber A: DP-1VR : SPC cable (40 / 1m) : SPC cable (80 / 2m) A: AC adapter (120V) 12AAC072 Circle pitch measurement The length A, B, C and D can be determined by measuring circles 1 to 3 once each, using the memory of measuring data together with the calculation function. (A maximum of nine circle Circle 3 Circle 2 C D Circle 1 B A Maximum/minimum and displacement measurement Displacement measurement (At maximum 1mm) Unit: inch MAX measurement MIN measurement Height measurement Inside diameter measurement D-47

48 Depth Micrometer SERIES 329, 129 Interchangeable Rod Type range. 25mm increments Accuracy: ± /±3μm for micrometer head feed ±[ (.00004xR/3)] ±(2+L/75)μm for interchangeable rod, Flatness of reference face: for 2.5 /1.3μm for 63.5mm width base, for 4 /2μm for 101.6mm width base Flatness of measuring rod face: 0.3μm Parallelism between reference face and measuring rod face: [ ( x R/2] Measuring rod diameter:.157 /4mm Function of Digimatic Model Origin-set, Zero-setting, Data hold, Data output, Function Lock 2 Presets Optional Accessories for Digimatic Model 05CZA662: SPC cable with data switch (40 / 1m) 05CZA663: SPC cable with data switch (80 / 2m) Digimatic model Range Order No. Base Size Rod Qty mm x16mm 6 rods 0-300mm x16mm 12 rods Range Order No. Base Size Rod Qty. 0-50mm x16mm 2 rods 0-100mm x16mm 4 rods 0-100mm x16mm 4 rods 0-150mm x16mm 6 rods 0-150mm x16mm 6 rods Inch/ Digimatic model Range Order No. Base Size Rod Qty. 0-6 / x.63 6 rods mm 0-12 / mm x rods Inch Range Order No. Base Size Rod Qty x.63 4 rods x.63 4 rods x.63 6 rods x.63 6 rods x rods x rods 63.5 or Range ø ø or Range ø ø18.3 Digimatic model Analog model D-48

49 Depth Micrometer SERIES 128 Accuracy: ±3μm for micrometer head feed Graduation:.001 or 0.01mm Flatness of reference face: 1.3μm for 63.5mm width base, 2μm for 101.6mm width base Flatness of measuring rod face: 0.3μm Parallelism between reference face and measuring rod face: Measuring rod diameter: 4mm Range Order No. Remarks (base) 0-25mm x16mm 0-25mm * 63.5x16mm 0-25mm x16mm 0-25mm * 101.6x16mm Inch Range Order No. Remarks (base) x x.63 Depth Micro Checker SERIES 515 micrometer Block pitch accuracy: ±(1+L/150)μm, Range Order No. Remarks (length to check) 0-150mm , 50, 75, 100, 125, 150mm 0-300mm , 50, 75, 100, 125, 150, 175, 200, 225, 250, 275, 300mm Inch Range Order No. Remarks (length to check) , 2, 3, 4, 5, 6 D-49

50 ABSOLUTE Digimatic Depth Gage SERIES 571 track of the origin point once set for the entire life of the battery. and micro-lapped. Range Order No. Resolution Accuracy Mass(g) 0-150mm mm ±0.02mm mm * 0.01mm ±0.02mm mm mm ±0.02mm mm * 0.01mm ±0.02mm mm mm ±0.03mm mm * 0.01mm ±0.03mm mm mm ±0.05mm mm mm ±0.05mm mm mm ±0.06mm mm mm ±0.07mm Inch/ Range Order No. Resolution Accuracy Mass(g) 0-6 / / ± mm 0.01mm 0-6 / *.0005 / ± mm 0.01mm 0-8 / / ± mm 0.01mm 0-8 / *.0005 / ± mm 0.01mm 0-12 / / ± mm 0.01mm 0-12 / *.0005 / ± mm 0.01mm 0-18 / / ± mm 0.01mm 0-24 / / ± mm 0.01mm 0-30 / / ± mm 0.01mm 0-40 / mm / 0.01mm ± Resolution:.0005 /0.01mm or 0.01mm Repeatability: 0.01mm Display: LCD Length standard: ABSOLUTE electrostatic capacitance Max. response speed: Unlimited Battery: SR44 (1 pc.), Battery life: Function Origin-set, Zero-setting, Automatic power on/off, Data output, Optional Accessories : Data hold unit : SPC cable with data switch (40 / 1m) : SPC cable with data switch (80 / 2m) 05CZA624 05CZA625 : Extension base (see page D-53.) Measurement data output water-resistant SPC cable. 2-ø L (27.5) ø9 Over 300mm / 12 range models Up to 300mm / 12 range models Range L Base thickness 0-6 / 0-150mm / 0-200mm / 0-300mm / 0-450mm / 0-600mm / 0-750mm / mm D-50

51 Vernier Depth Gage SERIES 527 and micro-lapped. Graduation:.001 or 0.05mm, 0.02mm Optional Accessories : Extension base (see page D-53.) Fine adjustment Range Order No. Vernier reading Accuracy Mass (g) Remarks 0-150mm mm ±0.05mm mm mm ±0.03mm mm mm ±0.03mm mm mm ±0.05mm mm mm ±0.03mm mm mm ±0.03mm mm mm ±0.08mm mm mm ±0.04mm mm mm ±0.04mm mm mm ±0.10mm mm mm ±0.05mm mm mm ±0.15mm mm mm ±0.07mm 1880 Inch Range Order No. Vernier reading Accuracy Mass (g) Remarks ± ± ± ± ± ø ø Over 300mm / 12 range models 70 Up to 300mm / 12 range models L Range L 0-6 / 0-150mm / 0-200mm / 0-300mm / 0-600mm / mm 1200 L D-51

52 Vernier Depth Gage SERIES 527 Hook End Type shaped to allow depth and thickness measurements of a projected portion or lip in a hole, in addition to standard depth measurement. Graduation: 0.05mm or 0.02mm Optional Accessory : Extension base (see page D-53.) L1= Reading on depth vernier L Range Order No. Vernier Accuracy Mass (g) reading 0-150mm mm ±0.05mm mm mm ±0.05mm mm mm ±0.08mm 270 L2= Reading on hook vernier L2 Range Order No. Vernier Accuracy Mass (g) reading 0-150mm mm ±0.03mm mm mm ±0.03mm mm mm ±0.04mm 350 Range L 0-150mm mm mm 410 L3= Reading on hook vernier Reading on depth vernier L3 ABSOLUTE Digimatic Depth Gage SERIES 571 Hook End Type keep track of the origin point once set for the entire life of the battery. and micro-lapped. Inch/ Range Order No. Resolution Accuracy Mass (g) 0-6 / / ± mm 0.01mm 0-8 / 0-200mm / 0.01mm ±.0015" ø L Range L 0-6" / 0-150mm " / 0-200mm Resolution:.0005"/0.01mm Repeatability:.0005"/0.01mm Display: LCD Length standard: ABSOLUTE electrostatic capacitance Max. response speed: Unlimited Battery: SR44 (1 pc.), Battery life: Function Origin-set, Zero-setting, Automatic power on/off, Data output, Optional Accessories 05CZA624 05CZA625 : Extension base (see page D-53.) D-52

53 Dial reading:.001 or 0.05mm Dial Depth Gage SERIES 527 with Fine Adjustment and micro-lapped Range Order No. Dial reading Accuracy Mass (g) 0-150mm mm ±0.05mm mm mm ±0.05mm mm mm ±0.08mm 340 Inch Range Order No. Dial reading Accuracy Mass (g) ± ± ± b a L a a b R5 R Range L 0-150mm mm mm 410 Extension Bases Optional Accessory for Depth Gage of a depth gage to extend its span. attached to 0-24 and 0-40, 0-600mm, mm, range models. Extension base Size Order No. Remarks (dimension a, b / n) 180mm mm, 55mm 2 260mm mm, 60mm 5 320mm mm, 55mm Inch Size Order No. Remarks (dimension a, b / n) , , , n-m4 P=0.7 No. 8-32UNC () (Inch) Size L a b n 7 / 180mm / 260mm / 320mm D-53

54 ABSOLUTE Digimatic/Dial Depth Gage SERIES 547, 7 track of the origin point once set for the entire life of the battery. (Series 547) supplied extension rod. ground and lapped for highest degree of flatness S indicator for upward facing readings. (7231, 7237, 7238) 7211 Digimatic model Range Order No. Resolution Stroke Accuracy Extension rod Flatness 0-200mm mm 12mm ±0.02mm 5 pcs. (10, 20, 30, 30, 100mm) 63.5x16mm 5μm 0-200mm mm 12mm ±0.02mm 5 pcs. (10, 20, 30, 30, 100mm) 101.6x16mm 5μm 0-200mm mm 12mm ±0.005mm 5 pcs. (10, 20, 30, 30, 100mm) 63.5x16mm 2μm 0-200mm mm 12mm ±0.005mm 5 pcs. (10, 20, 30, 30, 100mm) 101.6x16mm 2μm 0.01mm graduation Inch/ Digimatic model Range Order No. Resolution Stroke Accuracy Extension rod Flatness 0-8 / 0-200mm S.0005 / 0.01mm.5 ± pcs. (.5, 1, 2, 4 ) 2.5 x / 0-200mm S.0005 / 0.01mm.5 ± pcs. (.5, 1, 2, 4 ) 4 x / 0-200mm S / 0.001mm.5 ± pcs. (.5, 1, 2, 4 ) 2.5 x / 0-200mm S / 0.001mm.5 ± pcs. (.5, 1, 2, 4 ) 4 x /0.01mm graduation 0.001mm graduation /0.001mm graduation Dial Type Range Order No. Graduation Stroke Accuracy Extension rod Flatness 0-10mm 7210* 0.01mm 10mm ±0.015mm 40x16mm, 5μm 0-200mm mm 10mm ±0.015mm 5 pcs. (10, 20, 30, 30, 100mm) 63.5x16mm 5μm 0-200mm mm 10mm ±0.015mm 5 pcs. (10, 20, 30, 30, 100mm) 101.6x16mm 5μm 0-210mm mm 30mm ±0.03mm 3 pcs. (30, 60, 90mm) 63.5x16mm 5μm 0-210mm mm 30mm ±0.03mm 3 pcs. (30, 60, 90mm) 101.6x16mm 5μm 0-200mm mm 10mm ±0.015mm 5 pcs. (10, 20, 30, 30, 100mm) 100x18mm 5μm 0-200mm mm 10mm ±0.015mm 5 pcs. (10, 20, 30, 30, 100mm) 150x18mm 5μm 0-10mm 7222* 0.01mm 10mm ±0.015mm 5 pcs. (10, 20, 30, 30, 100mm) ø16mm 5μm 0-10mm mm 10mm ±0.015mm 5 pcs. (10, 20, 30, 30, 100mm) ø25mm 5μm 0-10mm mm 10mm ±0.015mm 5 pcs. (10, 20, 30, 30, 100mm) ø40mm 5μm 0-200mm mm 5mm ±0.015mm 5 pcs. (10, 20, 30, 30, 100mm) 63.5x16mm 5μm Inch Range Dial Type Order No. Graduation Stroke Accuracy Extension rod Flatness S ± pcs. (.5, 1, 2, 4 ) 2.5 x S ± pcs. (.5, 1, 2, 4 ) 4 x ± pcs. (.5, 1, 2, 4 ) 2.5 x ± pcs. (.5, 1, 2, 4 ) 4 x "/0.001mm Flatness of base face: 5μm Contact point: Carbide-tipped ball point or needle point (7210, 7222) Measuring force: 1.4N, 1.5N (digital model), 2.5N (7213, 7214, 7217S, 7218S) of Dial Mode Dial reading:.001 or 0.01mm Flatness of base face: 5μm or 2μm Contact point: Carbide-tipped ball point (needle point: 7210, 7222) Measuring force: 1.4N (2.5N: 7213, 7214, 7217, 7218) Function of Digimatic Model Origin-set, Zero-setting, Data hold, Data output, Optional Accessories for Digimatic Model : SPC cable (40 / 1m) : SPC cable (80 / 2m) :.5 Extension Rod : 1 Extension Rod : 2 Extension Rod : 4 Extension Rod : 10mm Extension Rod : 20mm Extension Rod : 30mm Extension Rod : 100mm Extension Rod Base Only (3/8 dia. hole) Part No. length remark : S, 7237, S, S : S, 7238, S, S D-54

55 (10) (114) 12 ø8 ø ø5 ø57 SR 0.2 ø (65) 114 (10) ø8 ø16 17 ø3 ø ø57 SR (104) 10 (65) ø8 17 ø5 A ø57 SR A= ø25mm 7224 A= ø40mm 35.5 ø57 ø57 ø57 (100) (10) ø16 ø A= 63.5mm 7212 A= 101.6mm 10.8 (35) (65) (30) (104) (65) 14 ø16 ø ø6 ø5 ø5 ø6 ø6.5 A ø11 ø5 25 A 100 SR 1.5 SR , 7217S A= 63.5mm 7214, 7218S A= 101.6mm (10) (100) ø16 ø SR (65) ø57 ø39 (10) (100) 25 ø16 ø8 17 SR ø5 ø6.5 ø (65) ø16 ø8 M2.5x , 7231 A=63.5mm 7238 A=101.6mm (64) (5) ø5 ø6 A SR SR 1.5 ø60.5 (104) (66) ø16 ø8 (10) 17 ø5 ø6 A SR , , S, S A= 63.5mm , , S, S A= 101.6mm D-55

56 Tire Thread Depth Gage SERIES 571, 700 can keep track of the origin point once set for the entire life of the battery. (Series 571) MOT-10 Range Order No. Resolution Accuracy 0-25mm MOT mm ±0.02mm 0-25mm mm ±0.2mm depth. (Series 700) Inch/ Range Order No. Resolution Accuracy 0-1 / mm MOT / 0.01mm ± / / ± mm 0.1mm Resolution:.0005 /0.01mm or 0.01mm (571 Series).001 /0.1mm or 0.1mm (700 Series) Display: LCD Battery: SR44 (1 pc.), Battery life: Approx. 2 years under normal use (approx hours: Series 571) Function Optional Accessories for Series : Data hold unit : SPC cable with data switch (40 / 1m) : SPC cable with data switch (80 / 2m) AND MASS ø3 ø3 (60) (3.5) MOT MOT-10 Mass:160g ø1.5 ø / Mass:50g D-56