Packing density, redefined mm pitch, 2 rows more convenience despite the small pitch

Size: px

Start display at page:

Download "Packing density, redefined mm pitch, 2 rows more convenience despite the small pitch"

Domenic Hodges
6 years ago
Views:

Doublerow connectors in 3.50 pitch Series B2L/S2L 3.50 Explanation OMNIMTE Signal acking density, redefined 3.

50 pitch and many single wire connections without loosing polarity in confined spaces with a modular design.

50 pitch with the bar uppermost, closes the gap between less space and more functionality.

1 Doublerow connectors in 3.50 pitch Series B2L/S2L 3.50 Explanation OMNIMTE Signal acking density, redefined 3.50 pitch, 2 rows more convenience despite the small pitch The two row arrangement of tension clamp connections permits a double junction density in 3.50 pitch and many single wire connections without loosing polarity in confined spaces with a modular design. Maximum connection density in the smallest of spaces for field connections of typical sensor wires up to 1 ², the two row female plugs in 3.50 pitch with the bar uppermost, closes the gap between less space and more functionality. Miniaturisation is more than just greater functional density in a smaller space, every millimetre of size saved reduces the space requirements and also the installation costs to the customer. Maximum packing density The double layer male header made from LC for the THR process allows the connection of 1 ² I/O single core wires in a virtual spacing of Simple handling without special tools Secure and quick wiring achieved without the need for a special tool. The large tension clamp connection permits operation with a standard screwdriver in the smallest dimensions in 2 row 3.50 pitch. Twice the junction density When compared with 19" racks and 24 connections in 3.50 pitch saves 30 % on the front panel and reduces the footprint on the CB by 10 % in 2 row 3.50 pitch.

for coding, marking, operating, cover hoods with integral strain relief and light

ibration proof screw flange or gentle release of entire component assemblies OMNIMTE

With the release lever you can disconnect the multi pole female plug from the mail

vailable with many different forms of male headers, efficient versatile optimised

ersatile numerous versions in the male header permits all solder processes for many

Can be mounted sidebyside without sacrificing any poles Comparing female plugs in

2 Doublerow connectors in 3.50 pitch Series B2L/S2L 3.50 Explanation dvanced application possibilities The extensive range of accessories for coding, marking, operating, cover hoods with integral strain relief and light guides for visualisation allows you to customise your project. ibration proof screw flange or gentle release of entire component assemblies OMNIMTE Signal C With the Screw flange variants you are on the vibration resistance side. With the release lever you can disconnect the multi pole female plug from the mail header with considerable less effort. vailable with many different forms of male headers, efficient versatile optimised Efficient the use of LC allows reliable processing without preprocessing. ersatile numerous versions in the male header permits all solder processes for many different applications. Can be mounted sidebyside without sacrificing any poles Comparing female plugs in disk form with female plugs in modular design, you save space between the plugs and permit sidebyside mounting without sacrificing any poles in any quantity with 2 row 3.50 pitch. Optimal suitable for automated assembly in tapeonreel packaging, the pin bars allow for automatic placement.

3 Doublerow connectors in 3.50 pitch Series B2L/S2L 3.50 Quick selection OMNIMTE Signal = Wire to board = Wire to wire = Board to wire = Board to board Orientation 270º 180º 135º 90º 90º 270º 180º 225º Male header Reflow solder connection Solder connection Levels Type S2LSMT S2LSMT S2LDTHR S2L S2L Orientation Flange options G/LF G/LF G/LF G/F G/F age C.6 C.8 C.10 C.12 C.14 Tension clamp B2L 180 (G)/F/LH C.16 Female plug Tension clamp (with cross connection) B2L Q 180 (G)/F/LH C.18 Female plug: (G)* = Closed (without flange) F = Screw flange with screw LH = Release lever Male header: G = Closed (without flange) F = Screw flange with nut LF = Solder flange with nut * not included in the article description

Doublerow connectors in 3.50 pitch Series B2L/S2L 3.50 OMNIMTE Signal S2LSMT 3.50/../90 Hightemperatureresistant, angled, doublerow, closed male header for all coon soldering methods.

4 Doublerow connectors in 3.50 pitch Series B2L/S2L 3.50 OMNIMTE Signal S2LSMT 3.50/../90 Hightemperatureresistant, angled, doublerow, closed male header for all coon soldering methods. Optimised for the SMT processing. 3.2 solder pin suitable for reflow and wave soldering. vailable in closed (G) version and with solder flange (LF). acked either in box (BX) or on tapeonreel (RL). roduct data IEC: 160 / 10 UL: 150 / 10 Note: dditional colours on request Goldplated contact surfaces on request Spacing between rows: see hole layout related to rated crosssection and min. No. of poles. on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. S2LSMT 3.50/../90G Box closed ends in box ++1, " 10, " 14, " 10, " D 2, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II LC GF 0 Copper alloy tinned 1.0, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. B2L/S2L 3.5 KO OR B2L/S2L 3.5 KO SW LED light guide S2LSMT 3.5 FL 20/ Colour black ol. (inch) Qty. Order No solder pins on request

5 Doublerow connectors in 3.50 pitch Series B2L/S2L 3.50 closed ends in tape S2LSMT 3.50/../90LF Box with solder flange in box S2LSMT 3.50/../90LF Tape with solder flange in tape OMNIMTE Signal +3x 14, " C 10, " +2x 2, " 1,5+0, " 8, " 10, " D 1, " Colour black ol. (inch) Qty. Order No Colour black ol. (inch) Qty. Order No Colour black ol. (inch) Qty. Order No solder pins on request Tape widths: 32, 44, 56, 72, solder pins on request 1.5 solder pins on request Tape widths: 32, 44, 56, 72, 88

Doublerow connectors in 3.50 pitch Series B2L/S2L 3.50 OMNIMTE Signal S2LSMT 3.50/../180 Hightemperatureresistant, straight, doublerow, closed male header for all coon soldering methods.

roduct data IEC: 160 / 10 UL: 150 / 10 Note: dditional colours on request Goldplated contact surfaces on request Spacing between rows: see hole layout related to rated crosssection and min. No. of poles.

6 Doublerow connectors in 3.50 pitch Series B2L/S2L 3.50 OMNIMTE Signal S2LSMT 3.50/../180 Hightemperatureresistant, straight, doublerow, closed male header for all coon soldering methods. Optimised for the SMT processing. 3.2 solder pin suitable for reflow and wave soldering. vailable in closed (G) version and with solder flange (LF). acked either in box (BX) or on tapeonreel (RL). roduct data IEC: 160 / 10 UL: 150 / 10 Note: dditional colours on request Goldplated contact surfaces on request Spacing between rows: see hole layout related to rated crosssection and min. No. of poles. on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. S2LSMT 3.50/../180G Box closed ends in Box ++1, " 14, " 10, " 2, " 4, " D Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II LC GF 0 Copper alloy tinned 1.0, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. B2L/S2L 3.5 KO OR B2L/S2L 3.5 KO SW Colour black ol. (inch) Qty. Order No solder pins on request

Doublerow connectors in 3.50 pitch Series B2L/S2L 3.50 closed ends in tape S2LSMT 3.50/../180LF Box with solder flange in box S2LSMT 3.50/../180LF Tape with solder flange in tape OMNIMTE Signal +3x 10,8 0.

7 Doublerow connectors in 3.50 pitch Series B2L/S2L 3.50 closed ends in tape S2LSMT 3.50/../180LF Box with solder flange in box S2LSMT 3.50/../180LF Tape with solder flange in tape OMNIMTE Signal +3x 10, " C 14, " +2x 2, " 4, " D 0, " 1,4+0, " Colour black ol. (inch) Qty. Order No Colour black ol. (inch) Qty. Order No Colour black ol. (inch) Qty. Order No solder pins on request Tape widths: 32, 44, 56, 72, solder pins on request 1.5 solder pins on request Tape widths: 32, 44, 56, 72, 88

Doublerow connectors in 3.50 pitch Series B2L/S2L 3.50 OMNIMTE Signal S2LDTHR 3.50/../90 The new standard for highdensity assemblies: virtual 0.

Solder flange eliminates the need for a fastening screw. 75% less space used on the circuit board. vailable in closed (G) version and with solder flange (LF). roduct data IEC: 200 / 7.

8 Doublerow connectors in 3.50 pitch Series B2L/S2L 3.50 OMNIMTE Signal S2LDTHR 3.50/../90 The new standard for highdensity assemblies: virtual pitch for 1 ² I/O connections Only fourrow doublelevel male header for conventional I20 sensor interfaces in 3.5 pitch. Four I/O contacts per 3.5 width, for 1 ² wire crosssection. Solder flange eliminates the need for a fastening screw. 75% less space used on the circuit board. vailable in closed (G) version and with solder flange (LF). roduct data IEC: 200 / 7.9 UL: 150 / 7 Note: dditional colours on request Goldplated contact surfaces on request Spacing between rows: see hole layout related to rated crosssection and min. No. of poles. on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. S2LDTHR 3.50/../90G 13, " + 4, " + 3, " 31, " 24, " 2, " 10, " 2, " D Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II LC GF 0 Copper alloy tinned 1.0, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. B2L/S2L 3.5 KO OR B2L/S2L 3.5 KO SW Colour black ol. (inch) Qty. Order No

9 Doublerow connectors in 3.50 pitch Series B2L/S2L , " + + 7, " 24, " 20, " " " 31, " OMNIMTE Signal 24, " 2, " C 2, " 24, " ø 1,5 + 0, " 10, " D 1, " Colour black ol. (inch) Qty. Order No

10 Doublerow connectors in 3.50 pitch Series B2L/S2L 3.50 OMNIMTE Signal S2L 3.50/../90 ngled, doublerow male header. Male headers with 3.5 pins that are designed for wave soldering and are packaged in a box. vailable in closed (G) version and with screw flange (F). roduct data IEC: 250 / 10 UL: 150 / 10 Note: dditional colours on request Goldplated contact surfaces on request Spacing between rows: see hole layout related to rated crosssection and min. No. of poles. on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. S2L 3.50/../90G closed ends L++1,4 L " 14, " 10, " D 2, " 10, " 13, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II BT 0 Copper alloy tinned 1.0, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. B2L/S2L 3.5 KO OR B2L/S2L 3.5 KO SW LED light guide S2L 3.5 FL 20/ Mounting screw TSC K 22X Colour orange black 3.50 ol. (inch) Qty. Order No. Order No For open version, see online catalogue

11 Doublerow connectors in 3.50 pitch Series B2L/S2L 3.50 with screw flange OMNIMTE Signal +3x 14, " C 10, " D 2, " 6, " 10, " 13, " 2, " Colour orange black 3.50 ol. (inch) Qty. Order No. Order No For open version, see online catalogue

12 Doublerow connectors in 3.50 pitch Series B2L/S2L 3.50 OMNIMTE Signal S2L 3.50/../180 Straight, doublerow male header. Male headers with 3.5 pins that are designed for wave soldering and are packaged in a box. The flange version can be screwed on the CB. The pin headers provide space for labelling and can be coded. vailable in closed (G) version and with screw flange (LF). roduct data IEC: 250 / 10 UL: 150 / 10 Note: dditional colours on request Goldplated contact surfaces on request Spacing between rows: see hole layout related to rated crosssection and min. No. of poles. on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. S2L 3.50/../180G closed ends L++1,4 L " 10, " 14, " D 2, " 3, " 6, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II BT 0 Copper alloy tinned 1.0, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. B2L/S2L 3.5 KO OR B2L/S2L 3.5 KO SW Mounting screw TSC K 22X Colour orange black 3.50 ol. (inch) Qty. Order No. Order No For open version, see online catalogue

13 Doublerow connectors in 3.50 pitch Series B2L/S2L 3.50 with screw flange OMNIMTE Signal +3x 10, " C 14, " D 3, " 1, " 2, " 6, " 2, " Colour orange black 3.50 ol. (inch) Qty. Order No. Order No For open version, see online catalogue

14 Doublerow connectors in 3.50 pitch Series B2L/S2L 3.50 OMNIMTE Signal B2L 3.50/../180 Female plugs with tensionclamp wire connections make wiring quick and simple. Many wire connections possible in a small space. vailable as a flange or release lever (LH) version standard version which can be aligned side by side without loss of poles. lugs provide space for labelling and can be coded. roduct data IEC: 200 / 10.3 / ² UL: 300 / 10 / WG Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. Wire end ferrule with plastic collar to DIN 46228/4 Wire end ferrule without plastic collar to DIN 46228/1 on drg. = pitch We recoend crimp shape for wireend ferrules with crimping tools Z 1,5 (order no ) or Z 6/5 (order no ) for the larger wire crosssections. Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. B2L 3.50/../180 L , " , " , " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C 1 III III II BT 0 Copper alloy tinned ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. B2L/S2L 3.5 KO OR B2L/S2L 3.5 KO SW Hood B2L 3.5H 10 SW B2L 3.5H 12 SW B2L 3.5H 14 SW B2L 3.5H 16 SW B2L 3.5H 18 SW B2L 3.5H 20 SW B2L 3.5H 22 SW B2L 3.5H 24 SW B2L 3.5H 26 SW B2L 3.5H 28 SW B2L 3.5H 30 SW B2L 3.5H 32 SW B2L 3.5H 34 SW B2L 3.5H 36 SW B2L 3.5H 6 SW B2L 3.5H 8 SW Screwdriver SD 0,4x2,5x Crimping tool Z Z 6/ Colour orange black 3.50 ol. (inch) Qty. Order No. Order No Representative derating curve

Doublerow connectors in 3.50 pitch Series B2L/S2L 3.50 with flange B2L 3.50/../180LH with release lever OMNIMTE Signal C +3x 20,6 0.811" +3x 20,6 0.811" 15,7 0.618" 15,7 0.618" 11,85 0.467" 11,85 0.

15 Doublerow connectors in 3.50 pitch Series B2L/S2L 3.50 with flange B2L 3.50/../180LH with release lever OMNIMTE Signal C +3x 20, " +3x 20, " 15, " 15, " 11, " 11, " Colour orange black 3.50 ol. (inch) Qty. Order No. Order No Colour orange black 3.50 ol. (inch) Qty. Order No. Order No dditional derating curves

16 Doublerow connectors in 3.50 pitch Series B2L/S2L 3.50 OMNIMTE Signal B2L 3.50/../180 Q Female plugs with integral crossconnection. Crossconnection is positioned vertically between the poles of rows directly on top of each other. Tension clamp connection with straight outlet and 3.5 pitch. Flange (F) and release lever (LH) available. roduct data IEC: 200 / 10.6 / ² UL: 300 / 7 / WG Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. Wire end ferrule with plastic collar to DIN 46228/4 Wire end ferrule without plastic collar to DIN 46228/1 on drg. = pitch We recoend crimp shape for wireend ferrules with crimping tool Z 6/5 (order no ) for the larger wire crosssections. Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. B2L 3.50/../180Q with crossconnection + 20, " 15, " 11, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C 1 III III II BT 0 Copper alloy tinned ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. B2L/S2L 3.5 KO OR B2L/S2L 3.5 KO SW Hood B2L 3.5H 10 SW B2L 3.5H 12 SW B2L 3.5H 14 SW B2L 3.5H 16 SW B2L 3.5H 18 SW B2L 3.5H 20 SW B2L 3.5H 22 SW B2L 3.5H 24 SW B2L 3.5H 26 SW B2L 3.5H 28 SW B2L 3.5H 30 SW B2L 3.5H 32 SW B2L 3.5H 34 SW B2L 3.5H 36 SW B2L 3.5H 6 SW B2L 3.5H 8 SW Screwdriver SD 0,4x2,5x Crimping tool Z Z 6/ Colour 3.50 black ol. (inch) Qty. Order No Representative derating curve

17 with crossconnection and flange C + 3 x 20, " 15, " Doublerow connectors in 3.50 pitch Series B2L/S2L 3.50 B2L 3.50/../180LHQ with crossconnection and release lever OMNIMTE Signal + 3 x 20, " 15, " 11, " 11, " Colour 3.50 black ol. (inch) Qty. Order No Colour 3.50 black ol. (inch) Qty. Order No

Connectors in 3.50 pitch Series BL/SL 3.50 Explanation OMNIMTE Signal Excellent design & performance: the single row SL/BL Connector system with 3.

18 Connectors in 3.50 pitch Series BL/SL 3.50 Explanation OMNIMTE Signal Excellent design & performance: the single row SL/BL Connector system with 3.50 pitch and the connection of I/Os Extensive range of male headers and female plugs that cover different angles to the CB and conductor angle to the field as well as a large range of accessories make the 3.50 pitch very versatile. Strong in performance and connections, compact in its size: Wire crosssections from 0.20 to 1.5 ² (WG 2814) Wire connection without special tools More than just extralow voltages: up to 250 (IEC) / 300 (UL) More than enough: up to 17 (IEC) / 10 (UL) Consistent system approach Implement wire2board, board2board or wire2wire connections. Decide for yourself on the soldering and connection techniques.

dvanced application possibilities OMNIMTE Signal C The extensive range of accessories increases the versatility and permits any desired combination

ersatile field connection Choose your individual connection from the classic screw connection BL, the futureproof USHIN connection BLI/O, the proven

Optimum processing Release latch or screw flange The release latch guarantees a good connection between the female plug and the device and also,

19 Connectors in 3.50 pitch Series BL/SL 3.50 Explanation Maximum packing density Either in a device using double layer male headers SLD or in the field using a 3 row socket connector BLI/O. dvanced application possibilities OMNIMTE Signal C The extensive range of accessories increases the versatility and permits any desired combination of male headers and female plugs. ersatile field connection Choose your individual connection from the classic screw connection BL, the futureproof USHIN connection BLI/O, the proven tensionclamp system BLZF or the quick connection BLIDCB. Optimum processing Release latch or screw flange The release latch guarantees a good connection between the female plug and the device and also, particularly for systems with many pins, ensures an assembly protecting release of the connection. The screw flange creates a vibration and shakeproof connection between the panel connection and the device. The tapeonreel packaging for high temperatureresistant male headers made of LC guarantees a suitable product for automated processing. The integrated solder flange significantly increases the CB s stability and replaces the screw that would normally be added later.

BLI/O 3.50/30poles or rather conventional systems with terminals or interface modules lowercase s. Since the female plug BLI/O 3.

20 Connectors in 3.50 pitch Series BL/SL 3.50 Explanation OMNIMTE Signal Small smaller BLI/O: minimal size maximum functionality You have a free choice for the field wiring: whether you prefer the compact version with our 3 row female plug BLI/O 3.50/30poles or rather conventional systems with terminals or interface modules lowercase s. Since the female plug BLI/O 3.50 based I/O systems are backwards compatible with existing field connections. The female plug BLI/O 3.50 pitch is an extremely compact, 1 or 3 row female plug suitable for connection of remote sensors and/or actuators with integrated LED display integrated crossconnections for potential distribution. For efficient remote functional units in the field level the female plug BLI/O 3.50 is a space saving solution to connect I/O components. Savings from the female connector BLI/O are apparent in the development and the manufacturing of the CB. The layout is simplified by 62 % and fewer layers are required. Multiply your potential Special crossconnectors, that are integrated into the second and third rows of the female plug, distribute the supply voltage to the individual I/O channels. In this way you can input, transfer or bridge the supply voltage. Thus you can save space with the I/O electronics and you can reduce your wiring overhead. ä... as simple as that Simply insert solid or flexible conductors with ferrules. The simple pressing of one button opens the terminal connections and allows you to insert the flexible wire without ferrules in no time at all. Disconnecting the wire is just as easy: press the button and pull out the wire.

50/30/180LR with lock & release lever to allow tool free interlocking and electronic assembly protecting

./RF with clipon flange Rugged screw flange The 3 row female plug BLI/O 35/30/180F with screw flange for

21 Connectors in 3.50 pitch Series BL/SL 3.50 Explanation Intuitive locking and releasing OMNIMTE Signal C The 3 row female plug BLI/O 3.50/30/180LR with lock & release lever to allow tool free interlocking and electronic assembly protecting release with the new male header SLSMT 3.50/10/../RF with clipon flange Rugged screw flange The 3 row female plug BLI/O 35/30/180F with screw flange for vibration and shock resistant interlocking in conjunction with the male header SLSMT 3.50/10/../LF with solder flange. Screwless CB fastening suitable for automatic assembly Integrated LEDs Since power is supplied directly through the female plug BLI/O 3.50, functional control of the sensor wiring is possible without any additionally connected I/O electronics. That simplifies initial coissioning and also clears up space on the control unit. The male header SLSMT has a clipon flange for the release latch and is available as solder flange variant for the screw flange. In both variants the extra solder pin replaces the screw that would have to be added later and significantly increases the mechanical stability to the CB.

22 Connectors in 3.50 pitch Series BL/SL 3.50 Explanation OMNIMTE Signal = Wire to board = Wire to wire = Board to wire = Board to board Orientation 270º 180º 135º 90º 90º 270º 180º 225º Reflow solder connection Levels 1 1 Type SLSMT SLSMT SLTHR SL Orientation Flange options G/F/LF/RF G/F/LF F (O)/G/F age C.26 C.29 C.37 C.32 Screw: Clamping yoke BL 180 (G)/F/LH/LR C.44 BL 90 (G)/F C.46 BL 270 (G)/F C.47 Female plug Tension clamp IDC Bus Spring: USH IN BLZF 180 (G)/F/LH/LR C.48 BLIDCB 180 (G)/F C.50 BLI/O 180 F/LR C.52 BLI/O 180 F/LR C.53 Female plug: (G)* = Closed (without flange) F = Screw flange with screw LH = Release lever LR = Lock & Release lever * not included in the article description Male header: (O)* = open G = Closed (without flange) F = Flange with nut LF = Solder flange with nut RF = Locking flange for LH/LR with solder pin

23 Connectors in 3.50 pitch Series BL/SL 3.50 Explanation Male header Solder connection OMNIMTE Signal 1 2 SL SL SLD SLD SLD (O)/G/F F G/F G/F G/F C.34 C.36 C.38 C.40 C.42 C

Connectors in 3.50 pitch Series BL/SL 3.50 OMNIMTE Signal SLSMT 3.50/../90 Hightemperatureresistant, angled, male header for all coon soldering methods in 3.5 pitch. Optimised for SMT processing. 3.2 older pin suitable for reflow and wave soldering.

24 Connectors in 3.50 pitch Series BL/SL 3.50 OMNIMTE Signal SLSMT 3.50/../90 Hightemperatureresistant, angled, male header for all coon soldering methods in 3.5 pitch. Optimised for SMT processing. 3.2 older pin suitable for reflow and wave soldering. The Male headers provide space for labelling and can be coded. vailable in closed (G) version and with solder flange (LF). acked either in box (BX) or on tapeonreel (RL). roduct data IEC: 320 / 15 UL: 300 / 10 Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. Diameter of solder eyelet D = from 9pole on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. SLSMT 3.50/../90G Box ++1, " 7, " 11, " 10, " D Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II LC GF 0 CuSn tinned 1.2, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BL SL 3.5 KO OR BL SL 3.5 KO SW Interlock BL/SL 3.5 R OR BL/SL 3.5 R SW LED light guide SL 3.5 FL 1.5/1.75/ SL 3.5 FL 1.5/ SL 3.5 FL 2.3/1.75/ SL 3.5 FL 2.3/ SL 3.5 FL 4.0/1.75/ SL 3.5 FL 4.0/ Mounting screw TSC K 22X Colour black black 3.50 ol. (inch) Qty. Order No. Order No

Connectors in 3.50 pitch Series BL/SL 3.50 SLSMT 3.50/../90LF Box SLSMT 3.50/../90LF Tape OMNIMTE Signal +3x 11,1 0.437" C 7,5 0.293" +2x 4,7 0.185" 10,2 0.402" D Colour 3.50 1.5 black ol. (inch) Qty.

25 Connectors in 3.50 pitch Series BL/SL 3.50 SLSMT 3.50/../90LF Box SLSMT 3.50/../90LF Tape OMNIMTE Signal +3x 11, " C 7, " +2x 4, " 10, " D Colour black ol. (inch) Qty. Order No Tape widths: 32, 44, 56, 72, Colour black black 3.50 ol. (inch) Qty. Order No. Order No Colour black ol. (inch) Qty. Order No Tape widths: 32, 44, 56, 72, 88

26 Connectors in 3.50 pitch Series BL/SL 3.50 OMNIMTE Signal SLSMT 3.50/../ F & RF Hightemperatureresistant, straight and angled, male header for all coon soldering methods in 3.5 pitch. Optimised for the SMT processing. 3.2 solder pin suitable for reflow and wave soldering. vailable in screw flange (F) and with solder flange for lock and release lever (RF). roduct data IEC: 320 / 15 UL: 300 / 10 Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. Diameter of solder eyelet D = from 9pole on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. SLSMT 3.50/../90F Box +3x 11, " 7, " +2x 4, " 10, " D Ø 2,3+0, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II LC GF 0 CuSn tinned 1.2, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BL SL 3.5 KO OR BL SL 3.5 KO SW Interlock BL/SL 3.5 R OR BL/SL 3.5 R SW LED light guide SL 3.5 FL 1.5/1.75/ SL 3.5 FL 1.5/ SL 3.5 FL 2.3/1.75/ SL 3.5 FL 2.3/ SL 3.5 FL 4.0/1.75/ SL 3.5 FL 4.0/ Colour black ol. (inch) Qty. Order No

Connectors in 3.50 pitch Series BL/SL 3.50 SLSMT 3.50/../180F Box SLSMT 3.50/../180F Tape OMNIMTE Signal + + 6,85 + + 0.27" 7,5 0.293" 11,1 0.435" +3x 7,5 0.293" C 11,1 0.435" + 2 x 4,7 0.185" 10,2 0.

00 0.827 50 1000630000 8 24.50 0.965 50 1000640000 9 28.00 1.102 50 1000650000 10 31.50 0.138 50 1060780000 11 35.00 1.378 50 1000660000 12 38.50 1.516 50 1000670000 13 42.00 1.654 50 1000680000 14 45.

00 0.551 50 1842800000 6 17.50 0.689 50 1842810000 7 21.00 0.827 50 1842820000 8 24.50 0.965 50 1842830000 9 28.00 1.102 50 1842840000 10 31.50 1.240 50 1842850000 11 35.00 1.378 50 1842860000 12 38.

27 Connectors in 3.50 pitch Series BL/SL 3.50 SLSMT 3.50/../180F Box SLSMT 3.50/../180F Tape OMNIMTE Signal + + 6, " 7, " 11, " +3x 7, " C 11, " + 2 x 4, " 10, " +2x 3, " D 2,3+0, " D Colour black ol. (inch) Qty. Order No Colour black ol. (inch) Qty. Order No Colour black ol. (inch) Qty. Order No Tape widths: 32, 44, 56, 72, 88

28 Connectors in 3.50 pitch Series BL/SL 3.50 OMNIMTE Signal SLSMT 3.50/../180 Hightemperatureresistant, straight male header in 3.50 pitch for all conventional soldering methods. Optimised for the SMT processing. 3.2 solder pin suitable for reflow and wave soldering. vailable in screw flange (F) and with solder flange (LF). acked either in box (BX) or on tapeonreel (RL). roduct data IEC: 320 / 15 UL: 300 / 10 Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. Diameter of solder eyelet D = from 9pole on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. SLSMT 3.50/../180G Box ++1, " 11, " 7, " 3, " D Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II LC GF 0 CuSn tinned 1.2, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BL SL 3.5 KO OR BL SL 3.5 KO SW Interlock BL/SL 3.5 R OR BL/SL 3.5 R SW Colour black black 3.50 ol. (inch) Qty. Order No. Order No

Connectors in 3.50 pitch Series BL/SL 3.50 SLSMT 3.50/../180LF Box SLSMT 3.50/../180LF Tape OMNIMTE Signal + 3 x 7,5 0.293" C 11,1 0.435" + 2 x L 1 D 3,5 0.138" Colour 3.50 1.5 black ol. (inch) Qty.

29 Connectors in 3.50 pitch Series BL/SL 3.50 SLSMT 3.50/../180LF Box SLSMT 3.50/../180LF Tape OMNIMTE Signal + 3 x 7, " C 11, " + 2 x L 1 D 3, " Colour black ol. (inch) Qty. Order No Tape widths: 32, 44, 56, 72, Colour black black 3.50 ol. (inch) Qty. Order No. Order No Colour black ol. (inch) Qty. Order No Tape widths: 32, 44, 56, 72, 88

30 Connectors in 3.50 pitch Series BL/SL 3.50 OMNIMTE Signal SL 3.50/../90 ngled male header (90 orientation) for wave soldering in 3.5 pitch. The male header is available in open, closed (G) and flange (F) versions. acked in cardboard box. roduct data IEC: 320 / 17 UL: 300 / 10 Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. SL 3.50/../90 L , " 7, " 10, " 1,3+0, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II BT 0 CuSn tinned 1.2, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BL SL 3.5 KO OR BL SL 3.5 KO SW Interlock BL/SL 3.5 R OR BL/SL 3.5 R SW LED light guide SL 3.5 FL 1.5/1.75/ SL 3.5 FL 1.5/ SL 3.5 FL 2.3/1.75/ SL 3.5 FL 2.3/ SL 3.5 FL 4.0/1.75/ SL 3.5 FL 4.0/ Mounting screw TSC K 22X Colour orange ol. (inch) Qty. Order No

31 Connectors in 3.50 pitch Series BL/SL 3.50 SL 3.50/../90F OMNIMTE Signal ++1, " 11, " +3x 11, " C 7, " 10, " +2x 7, " 4, " 10, " 1,3+0, " 2,3+0, " 1,3+0, " Colour orange ol. (inch) Qty. Order No Colour orange ol. (inch) Qty. Order No

32 Connectors in 3.50 pitch Series BL/SL 3.50 OMNIMTE Signal SL 3.50/../180 Straight male header (180 orientation) for wave soldering in 3.5 pitch. The male header is available in open, closed (G) and flange (F) versions. acked in cardboard box. roduct data IEC: 320 / 17 UL: 300 / 10 Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. SL 3.50/../180 L 1 + 7, " 11, " 3, " 1,3+0, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II BT 0 CuSn tinned 1.2, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BL SL 3.5 KO OR BL SL 3.5 KO SW Interlock BL/SL 3.5 R OR BL/SL 3.5 R SW Mounting screw TSC K 22X Colour orange ol. (inch) Qty. Order No

Connectors in 3.50 pitch Series BL/SL 3.50 SL 3.50/../180F OMNIMTE Signal ++1, 4 ++0.055" 7,5 0.295" +3x 7,5 0.295" C 11,1 0.437" 11,1 0.437" 3,5 0.138" 1,3+0,1 0.051" +2x 3,5 0.138" 1,3+0,1 0.051" 2,3 0.

33 Connectors in 3.50 pitch Series BL/SL 3.50 SL 3.50/../180F OMNIMTE Signal ++1, " 7, " +3x 7, " C 11, " 11, " 3, " 1,3+0, " +2x 3, " 1,3+0, " 2, " +2x Colour orange ol. (inch) Qty. Order No Colour orange ol. (inch) Qty. Order No

34 Connectors in 3.50 pitch Series BL/SL 3.50 OMNIMTE Signal SL 3.50/../135 ngled male header (135 orientation) for wave soldering in 3.5 pitch. The male header is available in closed (G) and flange (F) versions. roduct data IEC: 320 / 15 UL: 300 / 10 Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. SL 3.50/../135F +3x 13, " " 6, " 1,3 +0, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II BT 0 CuSn tinned 1.2, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BL SL 3.5 KO OR BL SL 3.5 KO SW Interlock BL/SL 3.5 R OR BL/SL 3.5 R SW Colour orange ol. (inch) Qty. Order No

Connectors in 3.50 pitch Series BL/SL 3.50 Hightemperatureresistant, 135 angled, male header for all coon soldering methods in 3.5 pitch. 3.2 solder pin suitable for reflow and wave soldering.

roduct data IEC: 320 / 15 UL: 300 / 10 Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. on drg.

35 Connectors in 3.50 pitch Series BL/SL 3.50 Hightemperatureresistant, 135 angled, male header for all coon soldering methods in 3.5 pitch. 3.2 solder pin suitable for reflow and wave soldering. The pin headers provide space for labelling and can be coded. roduct data IEC: 320 / 15 UL: 300 / 10 Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. SLTHR 3.50/../135F Box +3x 13, " OMNIMTE Signal C " 6, " 1,3 +0, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II LC GF 0 CuSn tinned 1.2, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BL SL 3.5 KO OR BL SL 3.5 KO SW Interlock BL/SL 3.5 R OR BL/SL 3.5 R SW Colour black ol. (inch) Qty. Order No

36 Connectors in 3.50 pitch Series BL/SL 3.50 OMNIMTE Signal SLD 3.50/../90 Doublelevel, angled male header (90 orientation) for wave soldering in 3.5 pitch. The male header is available in open, closed (G) and flange (F) versions. roduct data IEC: 200 / 10.5 UL: 300 / 8 Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. SLD 3.50/../90G ++1, " 24, " 23, " " 10, " 1,3+0, " " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II BT 0 CuSn tinned 1.2, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BL SL 3.5 KO OR BL SL 3.5 KO SW Colour orange ol. (inch) Qty. Order No

37 Connectors in 3.50 pitch Series BL/SL x 24, " C 23, " " 10, " 4, " " OMNIMTE Signal 1,3+0, " 2,3+0, " Colour orange ol. (inch) Qty. Order No

Connectors in 3.50 pitch Series BL/SL 3.50 OMNIMTE Signal SLD 3.50/../90 Doublelevel, staggered male header with angled 90 wire outlet for wave soldering in 3.5 pitch.

38 Connectors in 3.50 pitch Series BL/SL 3.50 OMNIMTE Signal SLD 3.50/../90 Doublelevel, staggered male header with angled 90 wire outlet for wave soldering in 3.5 pitch. The male header is available in open, closed (G) and flange (F) versions. roduct data IEC: 200 / 10.5 UL: 300 / 8 Note: dditional colours on request related to rated crosssection and min. No. of poles. Spacing between rows: see hole layout on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. SLD 3.50/../90G ++1, " 24, " " 1,3+0, " 10, " 11, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II BT 0 CuSn tinned 1.2, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BL SL 3.5 KO OR BL SL 3.5 KO SW Colour orange ol. (inch) Qty. Order No

39 Connectors in 3.50 pitch Series BL/SL x 24, " C " 1,3+0, " 10, " 11, " 4, " OMNIMTE Signal 2,4+0, " Colour orange ol. (inch) Qty. Order No

Connectors in 3.50 pitch Series BL/SL 3.50 OMNIMTE Signal SLD 3.50/../180 Doublelevel, staggered male header with straight 180 wire outlet for wave soldering in 3.5 pitch.

40 Connectors in 3.50 pitch Series BL/SL 3.50 OMNIMTE Signal SLD 3.50/../180 Doublelevel, staggered male header with straight 180 wire outlet for wave soldering in 3.5 pitch. The male header is available in closed (G) and flange (F) versions. roduct data IEC: 200 / 10.5 UL: 300 / 8 Note: dditional colours on request related to rated crosssection and min. No. of poles. Spacing between rows: see hole layout on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. SLD 3.50/../180G ++1, " " 24, " 2,3+0, " " 13, " 1,3+0, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II BT 0 CuSn tinned 1.2, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BL SL 3.5 KO OR BL SL 3.5 KO SW Colour orange ol. (inch) Qty. Order No

41 Connectors in 3.50 pitch Series BL/SL x " C 24, " OMNIMTE Signal +2x 2,3+0, " " 13, " 1,3+0, " Colour orange ol. (inch) Qty. Order No

42 Connectors in 3.50 pitch Series BL/SL 3.50 OMNIMTE Signal BL 3.50/../180 Female plug with clampingyoke screw system for connecting wires with straight outlet direction in 3.5 pitch. vailable with a screw flange (F), release lever (LH) or lock and release lever (LR). They include space for labelling and can be coded. roduct data IEC: 320 / 17 / ² UL: 300 / 10 / WG Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. Max. O.D. of conductor: 2.9 Wire end ferrule without plastic collar to DIN 46228/1 Wire end ferrule with plastic collar to DIN 46228/4 on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. BL 3.50/../180 L , " " " 10, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance x 2.5 DIN C 40 C 1.5 III III II BT 0 Copper alloy tinned ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BL SL 3.5 KO OR BL SL 3.5 KO SW Hood BL 3.5 H 10 SW BL 3.5 H 11 SW BL 3.5 H 12 SW BL 3.5 H 13 SW BL 3.5 H 14 SW BL 3.5 H 15 SW BL 3.5 H 16 SW BL 3.5 H 3 SW BL 3.5 H 4 SW BL 3.5 H 5 SW BL 3.5 H 6 SW BL 3.5 H 7 SW BL 3.5 H 8 SW BL 3.5 H 9 SW Strain relief BL 3.5 ZE 3 OR BL 3.5 ZE 3 SW BL 3.5 ZE 8 OR BL 3.5 ZE 8 SW Interlock BL/SL 3.5 R OR BL/SL 3.5 R SW Screwdriver SD 0,4x2,5x SDI 0,4x2,5x Colour orange black 3.50 ol. (inch) Qty. Order No. Order No Representative derating curve

Connectors in 3.50 pitch Series BL/SL 3.50 BL 3.50/../180LH BL 3.50/../180LR OMNIMTE Signal C +3x 18,5 0.728" + + 6,5 + + 0.256" 18,5 0.728" + + 6,5 + + 0.256" 18,5 0.728" 13 0.512" 16,48 0.

43 Connectors in 3.50 pitch Series BL/SL 3.50 BL 3.50/../180LH BL 3.50/../180LR OMNIMTE Signal C +3x 18, " + + 6, " 18, " + + 6, " 18, " " 16, " 18, " 10, " L 1 10, " 10, " Colour orange black 3.50 ol. (inch) Qty. Order No. Order No Colour orange black 3.50 ol. (inch) Qty. Order No. Order No Colour 3.50 orange ol. (inch) Qty. Order No dditional derating curves

Connectors in 3.50 pitch Series BL/SL 3.50 OMNIMTE Signal BL 3.50/../90 & 270 Female plug with clampingyoke screw system for connecting wires with 90 and 270 angled orientation in 3.5 pitch.

44 Connectors in 3.50 pitch Series BL/SL 3.50 OMNIMTE Signal BL 3.50/../90 & 270 Female plug with clampingyoke screw system for connecting wires with 90 and 270 angled orientation in 3.5 pitch. The female plugs are also available with a flange (F). They include space for labelling and can be coded. roduct data IEC: 320 / 12 / ² UL: 300 / 8 / WG Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. Max. O.D. of conductor: 2.9 Wire end ferrule without plastic collar to DIN 46228/1 Wire end ferrule with plastic collar to DIN 46228/4 on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. BL 3.50/../ " 22, " 15, " L 1 Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance x 2.5 DIN C 40 C 1.5 III III II BT 0 Copper alloy tinned ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BL SL 3.5 KO OR BL SL 3.5 KO SW Screwdriver SD 0,4x2,5x SDI 0,4x2,5x Colour orange black 3.50 ol. (inch) Qty. Order No. Order No Representative derating curve

45 Connectors in 3.50 pitch Series BL/SL 3.50 BL 3.50/../270 BL 3.50/../270F OMNIMTE Signal +3x " " +3x " C 22, " 14, " 22, " 15, " 22, " 14, " L 1 Colour orange black 3.50 ol. (inch) Qty. Order No. Order No Colour orange black 3.50 ol. (inch) Qty. Order No. Order No Colour orange black 3.50 ol. (inch) Qty. Order No. Order No

46 Connectors in 3.50 pitch Series BL/SL 3.50 OMNIMTE Signal BLZF 3.50/../180 Female plug with tensionclamp wire connection in 3.5 pitch. vailable with a screw flange (F), release lever (LH) or lock and release lever (LR). They include space for labelling and can be coded. roduct data IEC: 320 / 14.5 / ² UL: 300 / 10 / WG Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. Max. O.D. of conductor: 2.9 Wire end ferrule without plastic collar to DIN 46228/1 Wire end ferrule with plastic collar to DIN 46228/4 We recoend crimp shape for wireend ferrules with crimping tools Z 1,5 (order no ) or Z 6/5 (order no ) for the larger wire crosssections. on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. BLZF 3.50/../180 L , " " " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance x 2.5 DIN C 40 C 1.5 III III II BT 0 Copper alloy tinned ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BL SL 3.5 KO OR BL SL 3.5 KO SW Strain relief BL 3.5 ZE 3 OR BL 3.5 ZE 3 SW BL 3.5 ZE 8 OR BL 3.5 ZE 8 SW Screwdriver SD 0,4x2,5x Crimping tool Z Z 6/ Colour orange black 3.50 ol. (inch) Qty. Order No. Order No Representative derating curve

Connectors in 3.50 pitch Series BL/SL 3.50 BLZF 3.50/../180LH BLZF 3.50/../180LR OMNIMTE Signal C +3x 21,9 0.862" L 1 + + 6, 5 ++0.256" 21,9 0.862" + + 6.5 + + 0.256" 21.9 0.862" 13 0.512" 16,4 0.

47 Connectors in 3.50 pitch Series BL/SL 3.50 BLZF 3.50/../180LH BLZF 3.50/../180LR OMNIMTE Signal C +3x 21, " L , " 21, " " " " 16, " " " " " " " Colour orange black 3.50 ol. (inch) Qty. Order No. Order No Colour orange black 3.50 ol. (inch) Qty. Order No. Order No Colour 3.50 orange ol. (inch) Qty. Order No dditional derating curves

Connectors in 3.50 pitch Series BL/SL 3.50 OMNIMTE Signal BLIDCB 3.50/../180 Female plug provides quick IDC wire connections in 3.5 pitch for bus applications.

48 Connectors in 3.50 pitch Series BL/SL 3.50 OMNIMTE Signal BLIDCB 3.50/../180 Female plug provides quick IDC wire connections in 3.5 pitch for bus applications. The female plugs are also available with a flange (F). They include space for labelling and can be coded. roduct data IEC: 250 / 6 / ² UL: 300 / 7 / WG Note: dditional colours on request related to rated crosssection and min. No. of poles. for IDC contact 0.5: conductor to DIN EN pt 4 WG conductor: solid, 7 or 19 strands only Temperature range 20 to +80 C BLIDC 3.5 and BLIDCB 3.5 conductors solid / flexible to DIN on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. BLIDCB 3.50/../180 Bus version L , , " 13, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance x 2.5 DIN C 40 C 0.5 III III II BT 0 CuSn tinned ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BL SL 3.5 KO OR BL SL 3.5 KO SW Mounting block BLIDCB 3.5 SB Screwdriver SD 0,4x2,5x SDI 0,4x2,5x Colour orange black 3.50 ol. (inch) Qty. Order No. Order No Representative derating curve

49 Connectors in 3.50 pitch Series BL/SL 3.50 Bus version OMNIMTE Signal C +2x+3, 2 +2x+0.126" 21, " 12, " 13, " Colour orange black 3.50 ol. (inch) Qty. Order No. Order No

Connectors in 3.50 pitch Series BL/SL 3.50 OMNIMTE Signal BLI/O 3.5/../180 Female plug provides pluggable connection level for decentralized I/O electronics.

50 Connectors in 3.50 pitch Series BL/SL 3.50 OMNIMTE Signal BLI/O 3.5/../180 Female plug provides pluggable connection level for decentralized I/O electronics. It is used together with male headers in 3.5 pitch. vailable with a screw flange (F) or a lock and release lever (LR). roduct data IEC: 200 / 2.2 / ² UL: 50 / 5 / WG Note: dditional colours on request UL approval values for factory wiring We recoend crimp shape for wireend ferrules with crimping tools Z 1,5 (order no ) or Z 6/5 (order no ) for the larger wire crosssections. Total loadcarrying capacity of the potential bridges when feeding with is max (so the capacity is 2.18 for poles 2 through 9). Wire end ferrule without plastic collar to DIN 46228/1 Wire end ferrule with plastic collar to DIN 46228/4 Conductor < tinned Max. O.D. of conductor: 2.9 Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. BLI/O 3.50/10/180F " " 10, " " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance x 2.5 DIN C 40 C 1.5 III III II BT 0 Copper alloy tinned ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BL SL 3.5 KO OR BL SL 3.5 KO SW Screwdriver SD 0,4x2,5x SDI 0,4x2,5x Crimping tool Z Z 6/ Colour light grey black 3.50 ol. (inch) Qty. Order No. Order No Representative derating curve

51 Connectors in 3.50 pitch Series BL/SL 3.50 BLI/O 3.50/30/180F BLI/O 3.50/30/180LR OMNIMTE Signal C 18, " " 18, " " 20, " 42, " " 26, " 19,3 0.76" 42, " " 26, " Colour 3.50 black ol. (inch) Qty. Order No Colour light grey black 3.50 ol. (inch) Qty. Order No. Order No Colour 3.50 black ol. (inch) Qty. Order No dditional derating curves

52 Connectors in 3.50 pitch Series BL/SL 3.50 OMNIMTE Signal BLI/O 3.50/../180 N LED Female plug provides pluggable connection level with coon minus (N sensor) for decentralized I/O electronics with integrated LED display; used together with male headers in 3.5 pitch. vailable with a screw flange (F) or a lock an release lever (LR). roduct data IEC: / 2.2 / ² UL: 50 / 5 / WG Note: LED operating voltage: 10 30; LED operating current: 0.8m at 24 UL approval values for factory wiring We recoend crimp shape for wireend ferrules with crimping tools Z 1,5 (order no ) or Z 6/5 (order no ) for the larger wire crosssections. Total loadcarrying capacity of the potential bridges when feeding with is max (so the capacity is 2.18 for poles 2 through 9). Wire end ferrule without plastic collar to DIN 46228/1 Wire end ferrule with plastic collar to DIN 46228/4 Conductor < tinned Max. O.D. of conductor: 2.9 Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. BLI/O 3.50/10/180F N LED " " 12,7 0.5" " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance x 2.5 DIN C 40 C 1.5 III III II BT 0 Copper alloy tinned ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BL SL 3.5 KO OR BL SL 3.5 KO SW Screwdriver SD 0,4x2,5x SDI 0,4x2,5x Crimping tool Z Z 6/ Colour light grey black LED series resistors designed for 24 Representative derating curve BLI/O / 10pole Base curve Limit value of 17.5 at the outer poles corresponds to 2.18 for poles Derating curve Load current I [] 3.50 ol. (inch) Qty. Order No. Order No mbient temperature T [ C] LED series resistors designed for 24

53 Connectors in 3.50 pitch Series BL/SL 3.50 BLI/O 3.50/30/180F N LED BLI/O 3.50/30/180LR N LED OMNIMTE Signal C 42, " 16, " " " 42, " " " 20, " 20, " 26, " 19,3 0.76" 26, " Colour 3.50 black ol. (inch) Qty. Order No Colour light grey black 3.50 ol. (inch) Qty. Order No. Order No Colour 3.50 black ol. (inch) Qty. Order No LED series resistors designed for 24 LED series resistors designed for 24 LED series resistors designed for 24 dditional derating curves BLI/O / 30pole Base curve 3.5 Limit value 17.5 at the outer poles 3 of the male connector corresponds to 2.18 for poles The same applies to the voltage buses. 2 Derating curve Load current I [] mbient temperature T [ C]

54 Connectors in 3.50 pitch Series BL/SL 3.50 OMNIMTE Signal BLI/O 3.50/../180 NN LED Female plug provides pluggable connection level with coon positive (NN sensor) for decentralized I/O electronics with integrated LED display; used together with male headers in 3.5 pitch. vailable with a screw flange (F) or a lock an release lever (LR). roduct data IEC: / 2.2 / ² UL: 50 / 5 / WG Note: LED operating voltage: 10 30; LED operating current: 0.8m at 24 UL approval values for factory wiring We recoend crimp shape for wireend ferrules with crimping tools Z 1,5 (order no ) or Z 6/5 (order no ) for the larger wire crosssections. Total loadcarrying capacity of the potential bridges when feeding with is max (so the capacity is 2.18 for poles 2 through 9). Wire end ferrule without plastic collar to DIN 46228/1 Wire end ferrule with plastic collar to DIN 46228/4 Conductor < tinned Max. O.D. of conductor: 2.9 Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. BLI/O 3.50/10/180F NN LED " " 12,7 0.5" " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance x 2.5 DIN C 40 C 1.5 III III II BT 0 tinned ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BL SL 3.5 KO OR BL SL 3.5 KO SW Screwdriver SD 0,4x2,5x SDI 0,4x2,5x Crimping tool Z Z 6/ Colour light grey black LED series resistors designed for 24 Representative derating curve BLI/O / 10pole Base curve Limit value of 17.5 at the outer poles corresponds to 2.18 for poles Derating curve Load current I [] 3.50 ol. (inch) Qty. Order No. Order No mbient temperature T [ C] LED series resistors designed for 24

Connectors in 3.50 pitch Series BL/SL 3.50 BLI/O 3.50/30/180F NN LED BLI/O 3.50/30/180LR NN LED OMNIMTE Signal C 42,3 1.665" 16,9 0.665" 42 1.654" 27 1.063" 42,3 1.665" 19 0.748" 19 0.75" 20,8 0.

55 Connectors in 3.50 pitch Series BL/SL 3.50 BLI/O 3.50/30/180F NN LED BLI/O 3.50/30/180LR NN LED OMNIMTE Signal C 42, " 16, " " " 42, " " " 20, " 20, " 26, " 19,3 0.76" 26, " Colour 3.50 black ol. (inch) Qty. Order No Colour light grey black 3.50 ol. (inch) Qty. Order No. Order No Colour 3.50 black ol. (inch) Qty. Order No LED series resistors designed for 24 LED series resistors designed for 24 LED series resistors designed for 24 dditional derating curves BLI/O / 30pole Base curve 3.5 Limit value 17.5 at the outer poles 3 of the male connector corresponds to 2.18 for poles The same applies to the voltage buses. 2 Derating curve Load current I [] mbient temperature T [ C]

+ Connectors in 3.50 pitch Series BL/SL 3.50 OMNIMTE Signal BLI/O 3.50/../180 BLI/O 3.5 30 pin luggable connection terminals for remote I/O electronics Directly from the control or industrial C etc.

56 + Connectors in 3.50 pitch Series BL/SL 3.50 OMNIMTE Signal BLI/O 3.50/../180 BLI/O pin luggable connection terminals for remote I/O electronics Directly from the control or industrial C etc. to the sensor or actuator level Significant space savings as well as savings in design time and wiring. BLI/O 3.50/../180 N LED BLI/O pin luggable connection terminals for remote I/O electronics Directly from the control or industrial C etc. to the sensor or actuator level Significant space savings as well as savings in design time and wiring. BLI/O 3.50/../180 NN LED BLI/O pin luggable connection terminals for remote I/O electronics Directly from the control or industrial C etc. to the sensor or actuator level Significant space savings as well as savings in design time and wiring. Integrated LED version vailable for all the BLI/Os Test the sensor or actuator cabling before coissioning the controller Eliminates the need for function displays in the housing Integrated LED version vailable for all the BLI/Os Test the sensor or actuator cabling before coissioning the controller Eliminates the need for function displays in the housing Diagram of BLI/O 30 pin with SL pin Direct connection possibilities for sensors and actuators including their power supply Can be used for external or internal power supply sources Diagram of BLI/O 30 pin with SL pin Direct connection possibilities for sensors and actuators including their power supply Can be used for external or internal power supply sources Diagram of BLI/O 30 pin with SL pin Direct connection possibilities for sensors and actuators including their power supply Can be used for external or internal power supply sources N NN blue blue 0 red LED SL 3.5/10 0 grey grey M 1 grey 1 grey grey 2 grey 2 grey grey 3 grey 3 grey grey 4 grey 4 grey grey 5 grey 5 grey grey 6 grey 6 grey grey 7 grey 7 grey grey red red NN S 8 9 grey blue 8 9 blue red blue red blue red

of reflow ready strips Individually configurable with accessories and specific printing or coding Compact design to connect 1.5 ² wires Unique performance offering high levels of redundancy : 17.

57 Connectors in 3.81 pitch Series BC/SC 3.81 Explanation OMNIMTE Signal lugin connector OMNIMTE Signal 3.81 Opens up new dimensions for your application: Large variety of products and an extensive accessory range ll combinations are possible: wiretoboard, wiretowire, boardtoboard, boardtowire Wide range of reflow ready strips Individually configurable with accessories and specific printing or coding Compact design to connect 1.5 ² wires Unique performance offering high levels of redundancy : 17.5 Up to 65 C without derating mbient temperature up to 120 C Safe handling characteristics Lock & Release lever allows toolfree locking and modulesafe loosening ibration resistant USH IN connection offers tool free wiring connection roven screw connection Simple handling Reliable flange connections are easy to use and protect the electronic modules when they are removed: screw flange, release lever or lock & release lever. [] 65 C [ C] Unique performance High power reserves allow applications without restrictions up to the maximum wiring power rating even in high ambient temperatures.

stack height, maximum clamping force and USH

9 flat BCF 3.81 with 1.5 ² wire end ferrules.

and a comprehensive range of accessories Wire

SCSMT KO GR Light guide display SC FL Cover

technology: direct connection without tools

58 Connectors in 3.81 pitch Series BC/SC 3.81 Explanation Less space required ä Minimum stack height, maximum clamping force and USH IN: the SCDN 3.81 simply handles two 7.9 flat BCF 3.81 with 1.5 ² wire end ferrules. Complete system for all possible combinations and a comprehensive range of accessories Wire to board OMNIMTE Signal C Wire to wire Board to board Board to wire ä ccessories Maintenancefree, secure, vibrationproof Coding SCSMT KO GR Light guide display SC FL Cover hood BCZ H USH IN spring connection technology: direct connection without tools simply plug in the prepared conductors finished! Intuitive operation using large release buttons.

Dimensionally stable Can be processed without drying (MSL 1) Thermal expansion properties similar to a FR4 CB Unique handling Suitable for automatic machine handling, antistatic

(automated optical inspection) ariable pin length to support placement on both sides of the CB Integrated spacing bars improve the flow of heat during the solder process Free space in

59 Connectors in 3.81 pitch Series BC/SC 3.81 Explanation OMNIMTE Signal lugin connector OMNIMTE Signal 3.81 Brings new dimensions into handling Best choice for reflow soldering Reflow strips made from the high temperature material LC Form at high soldering temperatures stability Dimensionally stable Can be processed without drying (MSL 1) Thermal expansion properties similar to a FR4 CB Unique handling Suitable for automatic machine handling, antistatic packaging in tape, tray or tube Optional ick & lace pad supports feeder systems Solder flange fixes the strip to the CB without the use of screws n optimised pin end which permits OI (automated optical inspection) ariable pin length to support placement on both sides of the CB Integrated spacing bars improve the flow of heat during the solder process Free space in the pin area facilitate the development of the solder meniscus. ackaging suitable for use in automated assembly Standard belt widths for simple integration into the assembly process. Code in advance process universally No additional work required for factoryside reflowcompatible coding.

airflow during reflow soldering Rebates in the area of the pin Space for the development of the solder

60 Connectors in 3.81 pitch Series BC/SC 3.81 Explanation Solder flange pin OMNIMTE Signal Secures to the CB without a screw C Integrated bars Optimal airflow during reflow soldering Rebates in the area of the pin Space for the development of the solder meniscus in tips SMT No need for pretreatment, high temperature material LC is safe to use during the soldering process. Optimal recognition by the automatic optical inspection device (OI)

61 Connectors in 3.81 pitch Series BC/SC 3.81 Quick selection OMNIMTE Signal = Wire to board = Wire to wire = Board to wire = Board to board Orientation 270º 180º 135º 90º 90º 270º 180º 225º Male header Levels 1 Orientation Solder connection Type SC SC SC SC Flange options G/F G/F G/F G/F age C.84 C.86 C.88 C.90 Reflow solder connection Type SCSMT SCSMT SCSMT SCSMT Flange options G/LF G/LF G/LF G/F age C.66 C.68 C.70 C.72 Female plug Screw BCZ 180 (G)/F/LR C.106 BCZ 90 (G)/F C.110 BCZ 270 (G)/F C.111 USH IN BCF 180 (G)/F/LR C.112 Socket blocks Solder connection BCL SMT BCL SMT 90 (G)/F/LFI C (G)/LFI C.118 Female plug and header: (G)* = Closed (without flange) F = Flange with screw LFI = Inverted solder flange with nut LR = Lock & Release lever * not included in the article description Male header and plug: G = Closed (without flange) F = Screw flange with nut LF = Solder flange with nut LR = Lock & Release lever FI = Inverted flange with screw

62 Connectors in 3.81 pitch Series BC/SC 3.81 Quick selection Male header Male plug OMNIMTE Signal C Solder connection Screw SCD SCD SCDN SCD SCD SCZ G/F G/F G/F G/F G/F G/F/FI/LR C.92 C.94 C.96 C.98 C.100 C.102 Reflow solder connection SCDTHR SCDTHR SCDNTHR SCDTHR SCDTHR G/F G/F G/F G/F G/F C.74 C.76 C.78 C.80 C.82

63 Connectors in 3.81 pitch Series BC/SC 3.81 OMNIMTE Signal SCSMT 3.81/../90 Hightemperatureresistant male header. lugging direction parallel to CB vailable in closed (G) and with solder flange (LF). acked either in box (BX) or on antistatic roll (tapeonreel, RL) in length of either 1.5 or 3.2 roduct data IEC: 320 / 17.5 UL: 300 / 10 Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. on drg. = pitch SCSMT 3.81/../90G Box + 4, " 9, " Weidmüller s 3.81pitch (0.15 inch) plugin connectors are compatible with the layouts of standard connectors and offer space for labelling and coding. Ø " 7, " 7, " Ø 1,3 + 0, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II LC GF 0 Copper alloy tinned 1.0, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. SCSMT 3.81 KO GR Colour black black 3.81 ol. (inch) Qty. Order No. Order No

64 Connectors in 3.81 pitch Series BC/SC 3.81 SCSMT 3.81/../90LF Box SCSMT 3.81/../90LF Tape OMNIMTE Signal + 14, " 9, " C Ø " 7, " 7, " + 7, " Ø 1,3 + 0, " Ø 1,5 + 0, " 2,3 0.09" Colour black black 3.81 ol. (inch) Qty. Order No. Order No Colour black black 3.81 ol. (inch) Qty. Order No. Order No Colour black black 3.81 ol. (inch) Qty. Order No. Order No Tape widths: 32, 44, 56, 72, 88 Tape widths: 32, 44, 56, 72, 88

65 Connectors in 3.81 pitch Series BC/SC 3.81 OMNIMTE Signal SCSMT 3.81/../180 Hightemperatureresistant male header. lugging direction is perpendicular to CB vailable in closed (G) and with solder flange (LF). acked either in box (BX) or on antistatic roll (tapeonreel, RL) in length of either 1.5 or 3.2 roduct data IEC: 320 / 17.5 UL: 300 / 10 Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. on drg. = pitch SCSMT 3.81/../180G Box + 4, " 7, " Weidmüller s 3.81pitch (0.15 inch) plugin connectors are compatible with the layouts of standard connectors and offer space for labelling and coding. 9, " Ø " 3, " Ø 1,3 + 0, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II LC GF 0 Copper alloy tinned 1.0, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. SCSMT 3.81 KO GR Colour black black 3.81 ol. (inch) Qty. Order No. Order No

66 Connectors in 3.81 pitch Series BC/SC 3.81 SCSMT 3.81/../180LF Box SCSMT 3.81/../180LF Tape OMNIMTE Signal + 14, " 7, " C 9, " + 7, " Ø " Ø 1,3 + 0, " Ø 1,5 + 0, " 3, " Colour black black 3.81 ol. (inch) Qty. Order No. Order No Colour black black 3.81 ol. (inch) Qty. Order No. Order No Colour black black 3.81 ol. (inch) Qty. Order No. Order No Tape widths: 32, 44, 56, 72, 88 Tape widths: 32, 44, 56, 72, 88

11 0.433" Connectors in 3.81 pitch Series BC/SC 3.81 OMNIMTE Signal SCSMT 3.81/../135 Male header with 135 plugging angle (135 angle between the plugging direction and the solder pin).

2 roduct data IEC: 320 / 17.5 UL: 300 / 10 Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles.

67 " Connectors in 3.81 pitch Series BC/SC 3.81 OMNIMTE Signal SCSMT 3.81/../135 Male header with 135 plugging angle (135 angle between the plugging direction and the solder pin). This corresponds to a 45 angle between the wire orientation and the circuit board. Reflow compatible vailable in closed (G) and with solder flange (LF). in length of either 1.5 or 3.2 roduct data IEC: 320 / 17.5 UL: 300 / 10 Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. on drg. = pitch SCSMT 3.81/../135G + 5, " 13, " Weidmüller s 3.81pitch (0.15 inch) plugin connectors are compatible with the layouts of standard connectors and offer space for labelling and coding. Ø " Ø 1,3 + 0, " 9, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II LC GF 0 Copper alloy tinned 1.0, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. SCSMT 3.81 KO GR Colour black black 3.81 ol. (inch) Qty. Order No. Order No

Connectors in 3.81 pitch Series BC/SC 3.81 + 14,2 + 0.559" 13,1 0.516" C 11 0.433" OMNIMTE Signal Ø 1 0.039" 9,8 0.386" + 9 + 0.354" Ø 1,3 + 0,1 0.051" 1,2 0.046" Ø 1,5 + 0,1 0.059" 1.5 3.

68 Connectors in 3.81 pitch Series BC/SC , " 13, " C " OMNIMTE Signal Ø " 9, " " Ø 1,3 + 0, " 1, " Ø 1,5 + 0, " Colour black black 3.81 ol. (inch) Qty. Order No. Order No

69 Connectors in 3.81 pitch Series BC/SC 3.81 OMNIMTE Signal SCSMT 3.81/../270 Hightemperatureresistant male header with 270 plugging angle (the angle between the plugging direction and the solder pin). This angle has a plugging direction that is parallel to the circuit board with female plugs plugged in upside down. Reflow compatible vailable in closed (G) version and with screw flange (F). in length of either 1.5 or 3.2 Weidmüller s 3.81pitch (0.15 inch) plugin connectors are compatible with the layouts of standard connectors and offer space for labelling and coding. roduct data IEC: 320 / 17.5 UL: 300 / 10 Note: Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. on drg. = pitch SCSMT 3.81/../270G + 5, " Ø " 7, " 9, " Ø 1,3 + 0, " " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II LC GF 0 Copper alloy tinned 1.0, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. SCSMT 3.81 KO GR Colour black black 3.81 ol. (inch) Qty. Order No. Order No

70 Connectors in 3.81 pitch Series BC/SC , " 9, " C 7, " OMNIMTE Signal Ø " " Ø 1,3 + 0, " Colour black black 3.81 ol. (inch) Qty. Order No. Order No

71 Connectors in 3.81 pitch Series BC/SC 3.81 OMNIMTE Signal SCDTHR 3.81/../90 Hightemperatureresistant, doublelevel male header for reflow soldering. Orientation: 90 Designed for front panel applications. vailable in closed (G) version and with screw flange (F). roduct data IEC: 320 / 17.5 UL: 300 / 10 Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. on drg. = pitch SCDTHR 3.81/../90G + 5, " 21, " Weidmüller s 3.81pitch (0.15 inch) plugin connectors are compatible with the layouts of standard connectors and offer space for labelling and coding. Ø " 15,24 0.6" 22, " " Ø 1,3 + 0, " " 12,7 0.5" Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II LC GF 0 Copper alloy tinned 1.0, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. SCSMT 3.81 KO GR Colour black black 3.81 ol. (inch) Qty. Order No. Order No

72 Connectors in 3.81 pitch Series BC/SC , " " 21, " C 15,24 0.6" 22, " OMNIMTE Signal Ø " " Ø 1,3 + 0, " " 12,7 0.5" Ø 2,7 + 0, " 3, " Colour black black 3.81 ol. (inch) Qty. Order No. Order No

73 Connectors in 3.81 pitch Series BC/SC 3.81 OMNIMTE Signal SCDTHR 3.81/../180 Hightemperatureresistant, doublelevel male header for reflow soldering. Orientation: 180 vailable in closed (G) version and with screw flange (F). Weidmüller s 3.81pitch (0.15 inch) plugin connectors are compatible with the layouts of standard connectors and offer space for labelling and coding. roduct data IEC: 320 / 17.5 UL: 300 / 10 Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. on drg. = pitch SCDTHR 3.81/../180G + 5, " 21, " 22, " Ø " Ø 1,3 + 0, " 4, " 15,24 0.6" Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II LC GF 0 Copper alloy tinned 1.0, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. SCSMT 3.81 KO GR Mounting screw TSC K 22X Colour black black 3.81 ol. (inch) Qty. Order No. Order No

74 Connectors in 3.81 pitch Series BC/SC , " 22, " C 21, " OMNIMTE Signal " Ø " Ø 1,3 + 0, " Ø 2,3 + 0, " 15,24 0.6" 4, " Colour black black 3.81 ol. (inch) Qty. Order No. Order No

Connectors in 3.81 pitch Series BC/SC 3.81 OMNIMTE Signal SCDNTHR 3.81/../90 Compact doublelevel male header for reflow soldering process. For use with BCF 3.81 plugs.

75 Connectors in 3.81 pitch Series BC/SC 3.81 OMNIMTE Signal SCDNTHR 3.81/../90 Compact doublelevel male header for reflow soldering process. For use with BCF 3.81 plugs. Orientation: 90 Designed for front panel applications. vailable in closed (G) version and with screw flange (F). Weidmüller s 3.81pitch (0.15 inch) plugin connectors are compatible with the layouts of standard connectors and offer space for labelling and coding. roduct data IEC: 320 / 17.5 UL: 300 / 10 Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. on drg. = pitch SCDNTHR 3.81/../90G + 5, " Ø " 8, " " 15, " " 13, " Ø 1,3 + 0, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II LC GF 0 Copper alloy tinned 1.0, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. SCSMT 3.81 KO GR Colour black black 3.81 ol. (inch) Qty. Order No. Order No

Connectors in 3.81 pitch Series BC/SC 3.81 8,3 0.327" 13,3 0.524" C 15,2 0.598" OMNIMTE Signal + 14,2 + 0.559" + 9 + 0.354" Ø 1 0.039" 3 0.116" 8 0.315" Ø 1,3 + 0,1 0.051" 3,81 0.15" 3,81 0.

76 Connectors in 3.81 pitch Series BC/SC , " 13, " C 15, " OMNIMTE Signal + 14, " " Ø " " " Ø 1,3 + 0, " 3, " 3, " Ø 2,7 + 0, " Colour black black 3.81 ol. (inch) Qty. Order No. Order No

Connectors in 3.81 pitch Series BC/SC 3.81 OMNIMTE Signal SCDTHR 3.81/../90 Hightemperatureresistant, doublelevel male header for reflow soldering.

5 UL: 300 / 10 Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. Rated data refer only to the component itself.

77 Connectors in 3.81 pitch Series BC/SC 3.81 OMNIMTE Signal SCDTHR 3.81/../90 Hightemperatureresistant, doublelevel male header for reflow soldering. Orientation: 90 Connections at two offset levels and open access to each row. vailable in Closed (G) version and with screw flange (F). roduct data IEC: 320 / 17.5 UL: 300 / 10 Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. on drg. = pitch SCDTHR 3.81/../90G + 5, " 21, " Weidmüller s 3.81pitch (0.15 inch) plugin connectors are compatible with the layouts of standard connectors and offer space for labelling and coding. Ø " 15,24 0.6" " 22, " Ø 1,3 + 0, " 12,7 0.5" " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II LC GF 0 Copper alloy tinned 1.0, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. SCSMT 3.81 KO GR Colour black black 3.81 ol. (inch) Qty. Order No. Order No

78 Connectors in 3.81 pitch Series BC/SC , " " 21, " C 15,24 0.6" 22, " OMNIMTE Signal Ø " " Ø 1,3 + 0, " " 12,7 0.5" Ø 2,7 + 0, " 3, " Colour black black 3.81 ol. (inch) Qty. Order No. Order No

Connectors in 3.81 pitch Series BC/SC 3.81 OMNIMTE Signal SCDTHR 3.81/../180 Hightemperatureresistant, doublelevel male header for reflow soldering.

79 Connectors in 3.81 pitch Series BC/SC 3.81 OMNIMTE Signal SCDTHR 3.81/../180 Hightemperatureresistant, doublelevel male header for reflow soldering. Outlet direction: 180 Connections at two offset levels and open access to each row. vailable in Closed (G) version and with screw flange (F). roduct data IEC: 320 / 17.5 UL: 300 / 10 Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. on drg. = pitch SCDTHR 3.81/../180G + 5, " 22, " Weidmüller s 3.81pitch (0.15 inch) plugin connectors are compatible with the layouts of standard connectors and offer space for labelling and coding. 21, " Ø " Ø 1,3 + 0, " 4, " 15,24 0.6" Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II LC GF 0 Copper alloy tinned 1.0, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. SCSMT 3.81 KO GR Mounting screw TSC K 22X Colour black black 3.81 ol. (inch) Qty. Order No. Order No

80 Connectors in 3.81 pitch Series BC/SC , " 22, " C 21, " + 8, " Ø " Ø 1,3 + 0, " 7, " 4, " 15,24 0.6" OMNIMTE Signal Ø 2,3 + 0,1 0.09" Colour black black 3.81 ol. (inch) Qty. Order No. Order No

Connectors in 3.81 pitch Series BC/SC 3.81 OMNIMTE Signal SC 3.81/../90 Male header with plugging direction in parallel to the circuit board. roduct data IEC: 320 / 17.

81 Connectors in 3.81 pitch Series BC/SC 3.81 OMNIMTE Signal SC 3.81/../90 Male header with plugging direction in parallel to the circuit board. roduct data IEC: 320 / 17.5 UL: 300 / 10 Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. on drg. = pitch SC 3.81/../90G vailable in closed (G) version and with screw flange (F) Weidmüller s 3.81pitch (0.15 inch) plugin connectors are compatible with the layouts of standard connectors. They support a floodlight display and offer space for labelling and coding. Ø " + + 1, " 7, " 9, " " Ø 1,2 + 0, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II GF 0 Copper alloy tinned 1.0, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. SCSMT 3.81 KO GR Colour orange black 3.81 ol. (inch) Qty. Order No. Order No

Connectors in 3.81 pitch Series BC/SC 3.81 + + 10,6 + + 0.417" 9,2 0.362" C 7,1 OMNIMTE Signal Ø 1 0.039" 0.278" 1,2 + 0,1 0.047" 8 0.315" 3.2 3.2 Colour orange black 3.81 ol. (inch) Qty. Order No.

82 Connectors in 3.81 pitch Series BC/SC , " 9, " C 7,1 OMNIMTE Signal Ø " 0.278" 1,2 + 0, " " Colour orange black 3.81 ol. (inch) Qty. Order No. Order No

83 Connectors in 3.81 pitch Series BC/SC 3.81 OMNIMTE Signal SC 3.81/../180 The 180 male header has a perpendicular plugging direction in relation to the circuit board. It is available in closed (G) and screw flange (F) versions. Weidmüller s 3.81pitch (0.15 inch) plugin connectors are compatible with the layouts of standard connectors and offer space for labelling and coding. roduct data IEC: 320 / 17.5 UL: 300 / 10 Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. on drg. = pitch SC 3.81/../180G + + 1, " 9, " 7, " Ø " " Ø 1,2 + 0, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II GF 0 Copper alloy tinned 1.0, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. SCSMT 3.81 KO GR Mounting screw TSC K 22X Colour orange black 3.81 ol. (inch) Qty. Order No. Order No

84 Connectors in 3.81 pitch Series BC/SC , " C 9, " OMNIMTE Signal 7, " " Ø " Ø 1,2 + 0, " " Ø 2,3 + 0, " Colour orange black 3.81 ol. (inch) Qty. Order No. Order No

Connectors in 3.81 pitch Series BC/SC 3.81 OMNIMTE Signal SC 3.81/../135 Male header with 135 plugging angle (135 angle between the plugging direction and the solder pin).

85 Connectors in 3.81 pitch Series BC/SC 3.81 OMNIMTE Signal SC 3.81/../135 Male header with 135 plugging angle (135 angle between the plugging direction and the solder pin). This corresponds to a 45 angle between the wire outlet and the circuit board. vailable in Closed (G) version and with screw flange (F). roduct data IEC: 320 / 17.5 UL: 300 / 10 Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. on drg. = pitch SC 3.81/../135G + 5, " 13, " Weidmüller s 3.81pitch (0.15 inch) plugin connectors are compatible with the layouts of standard connectors and offer space for labelling and coding " Ø " 9, " Ø 1,2 + 0, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II GF 0 Copper alloy tinned 1.0, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. SCSMT 3.81 KO GR Colour orange black 3.81 ol. (inch) Qty. Order No. Order No

Connectors in 3.81 pitch Series BC/SC 3.81 + 14,2 + 0.559" 13,1 0.516" C 11 0.433" OMNIMTE Signal Ø 1 0.039" Ø 1,2 + 0,1 0.047" 9,8 0.386" 3.2 3.2 Colour orange black 3.81 ol. (inch) Qty. Order No.

86 Connectors in 3.81 pitch Series BC/SC , " 13, " C " OMNIMTE Signal Ø " Ø 1,2 + 0, " 9, " Colour orange black 3.81 ol. (inch) Qty. Order No. Order No

Connectors in 3.81 pitch Series BC/SC 3.81 OMNIMTE Signal SC 3.81/../270 Male header with 270 plugging angle (270 angle between the plugging direction and the solder pin).

87 Connectors in 3.81 pitch Series BC/SC 3.81 OMNIMTE Signal SC 3.81/../270 Male header with 270 plugging angle (270 angle between the plugging direction and the solder pin). This angle has a plugging direction that is parallel to the circuit board with female plugs plugged in upside down. vailable in closed (G) version and with screw flange (F). roduct data IEC: 320 / 17.5 UL: 300 / 10 Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. on drg. = pitch SC 3.81/../270G + 5, " 9, " Weidmüller s 3.81pitch (0.15 inch) plugin connectors are compatible with the layouts of standard connectors and offer space for labelling and coding. Ø " 7, " " Ø 1,2 + 0, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II GF 0 Copper alloy tinned 1.0, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. SCSMT 3.81 KO GR Colour orange black 3.81 ol. (inch) Qty. Order No. Order No

88 Connectors in 3.81 pitch Series BC/SC 3.81 C OMNIMTE Signal + 14, " 9, " Ø " 7, " " Ø 1,2 + 0, " Colour orange black 3.81 ol. (inch) Qty. Order No. Order No

89 Connectors in 3.81 pitch Series BC/SC 3.81 OMNIMTE Signal SCD 3.81/../90 Doublelevel male header for wave soldering. Outlet direction: 90 Connections at the same level with access that is flush over the frontof the board. vailable in closed (G) version and with screw flange (F). roduct data IEC: 320 / 17.5 UL: 300 / 10 Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. on drg. = pitch SCD 3.81/../90G + 5, " 21, " Weidmüller s 3.81pitch (0.15 inch) plugin connectors are compatible with the layouts of standard connectors and offer space for labelling and coding. Ø " 15,24 0.6" 22, " " Ø 1,2 + 0, " " 12,7 0.5" Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II GF 0 Copper alloy tinned 1.0, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. SCSMT 3.81 KO GR Colour orange black 3.81 ol. (inch) Qty. Order No. Order No

90 Connectors in 3.81 pitch Series BC/SC , " " 21,9 0.86" C 15,24 0.6" 22, " Ø " " OMNIMTE Signal Ø 1,2 + 0, " " 12,7 0.5" Ø 2,7 + 0, " 3, " Colour orange black 3.81 ol. (inch) Qty. Order No. Order No

Connectors in 3.81 pitch Series BC/SC 3.81 OMNIMTE Signal SCD 3.81/../180 Doublelevel male header for wave soldering. Outlet direction: 180 vailable in closed (G) version and with screw flange (F).

91 Connectors in 3.81 pitch Series BC/SC 3.81 OMNIMTE Signal SCD 3.81/../180 Doublelevel male header for wave soldering. Outlet direction: 180 vailable in closed (G) version and with screw flange (F). Weidmüller s 3.81pitch (0.15 inch) plugin connectors are compatible with the layouts of standard connectors and offer space for labelling and coding. roduct data IEC: 320 / 17.5 UL: 300 / 10 Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. on drg. = pitch SCD 3.81/../180G + 5, " 21, " 22, " Ø " Ø 1,2 + 0, " 4, " 15,24 0.6" Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II GF 0 Copper alloy tinned 1.0, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. SCSMT 3.81 KO GR Mounting screw TSC K 22X Colour orange black 3.81 ol. (inch) Qty. Order No. Order No

92 Connectors in 3.81 pitch Series BC/SC , " 22, " C 21, " + 9 Ø " " Ø 1,2 + 0, " Ø 2,3 + 0, " 4, " 15,24 0.6" OMNIMTE Signal Colour orange black 3.81 ol. (inch) Qty. Order No. Order No

93 Connectors in 3.81 pitch Series BC/SC 3.81 OMNIMTE Signal SCDN 3.81/../90 Compact doublelevel male header for wave soldering. For use with BCF 3.81 (USH IN) plugs. Orientation: 90 Designed for front panel applications. vailable in closed (G) version or with screw flange (F). roduct data IEC: 320 / 17.5 UL: 300 / 10 Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. on drg. = pitch SCDN 3.81/../90G + 5, " 8, " 13, " Weidmüller s 3.81pitch (0.15 inch) plugin connectors are compatible with the layouts of standard connectors and offer space for labelling and coding. Ø " " 15, " " Ø 1,2 + 0, " 3, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II GF 0 Copper alloy tinned 1.0, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. SCSMT 3.81 KO GR Colour orange black 3.81 ol. (inch) Qty. Order No. Order No

94 Connectors in 3.81 pitch Series BC/SC , " " 8, " 13, " C 15, " OMNIMTE Signal Ø " " " Ø 1,2 + 0, " 3, " 3, " Ø 2,7 + 0, " Colour orange black 3.81 ol. (inch) Qty. Order No. Order No

Connectors in 3.81 pitch Series BC/SC 3.81 OMNIMTE Signal SCD 3.81/../90 Double level male header for wave soldering. Orientation: 90 Connections at two offset levels with open access to each row.

95 Connectors in 3.81 pitch Series BC/SC 3.81 OMNIMTE Signal SCD 3.81/../90 Double level male header for wave soldering. Orientation: 90 Connections at two offset levels with open access to each row. vailable in closed (G) version or with screw flange (F). roduct data IEC: 320 / 17.5 UL: 300 / 10 Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. on drg. = pitch SCD 3.81/../90G + 5, " 21, " Weidmüller s 3.81pitch (0.15 inch) plugin connectors are compatible with the layouts of standard connectors and offer space for labelling and coding. Ø " 15,24 0.6" " 22, " Ø 1,2 + 0, " 12,7 0.5" " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II GF 0 Copper alloy tinned 1.0, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. SCSMT 3.81 KO GR Colour orange black 3.81 ol. (inch) Qty. Order No. Order No

96 Connectors in 3.81 pitch Series BC/SC , " " 21, " C Ø " 15,24 0.6" OMNIMTE Signal " Ø 1,2 + 0, " 12,7 0.5" 22, " Ø 2,7 + 0, " " 3, " Colour orange black 3.81 ol. (inch) Qty. Order No. Order No

Connectors in 3.81 pitch Series BC/SC 3.81 OMNIMTE Signal SCD 3.81/../180 Doublelevel male header for wave soldering. Orientation: 180. Connections at two offset levels with open access to each row.

97 Connectors in 3.81 pitch Series BC/SC 3.81 OMNIMTE Signal SCD 3.81/../180 Doublelevel male header for wave soldering. Orientation: 180. Connections at two offset levels with open access to each row. vailable in closed (G) version or with screw flange (F). roduct data IEC: 320 / 17.5 UL: 300 / 10 Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. on drg. = pitch SCD 3.81/../180G + 5, " 22, " Weidmüller s 3.81pitch (0.15 inch) plugin connectors are compatible with the layouts of standard connectors and offer space for labelling and coding. 21, " Ø " Ø 1,2 + 0, " 4, " 15,24 0.6" Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II GF 0 Copper alloy tinned 1.0, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. SCSMT 3.81 KO GR Mounting screw TSC K 22X Colour orange black 3.81 ol. (inch) Qty. Order No. Order No

Connectors in 3.81 pitch Series BC/SC 3.81 + 14,2 + 0.559" 22,7 0.894" C 21,9 0.862" + 8,2 + 0.323" Ø 1 0.039" Ø 1,2 + 0,1 0.047" 7,6 0.299" 4,5 0.178" 15,24 0.6" OMNIMTE Signal Ø 2,3 + 0,1 0.09" 3.

98 Connectors in 3.81 pitch Series BC/SC , " 22, " C 21, " + 8, " Ø " Ø 1,2 + 0, " 7, " 4, " 15,24 0.6" OMNIMTE Signal Ø 2,3 + 0,1 0.09" Colour orange black 3.81 ol. (inch) Qty. Order No. Order No

99 Connectors in 3.81 pitch Series BC/SC 3.81 OMNIMTE Signal SCZ 3.81/../ 180 Inverted male plug with screw connection: Wiretowire connection with the BCZ female plug Boardtowire connection with the BCLSMT female header. vailable in closed (G) version, screw flange (F), inverted flange (FI) and with lock and release lever (LR). roduct data IEC: 320 / 17.5 / ² UL: 300 / 10 / WG Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. Wire end ferrule with plastic collar to DIN 46228/4 on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. SCZ 3.81/../180G + + 0, " 18, " Weidmüller s 3.81pitch (0.15 inch) plugin connectors are compatible with the layouts of standard connectors and offer space for labelling and coding. 11, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance x 2.5 DIN C 40 C 1 III III II GF 0 Copper alloy tinned ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. SCSMT 3.81 KO GR Screwdriver SD 0,4x2,5x SDI 0,4x2,5x Colour orange black 3.81 ol. (inch) Qty. Order No. Order No Representative derating curve

100 Connectors in 3.81 pitch Series BC/SC 3.81 SCZ 3.81/../180FI SCZ 3.81/../180LR OMNIMTE Signal C , " 18, " , " 18, " , " 18, " 11, " 11, " " Colour orange black 3.81 ol. (inch) Qty. Order No. Order No Colour orange black 3.81 ol. (inch) Qty. Order No. Order No Colour orange black 3.81 ol. (inch) Qty. Order No. Order No dditional derating curves

Connectors in 3.81 pitch Series BC/SC 3.81 OMNIMTE Signal SCZ 3.81/../180 ZE Inverted male plug with screw connection and strain relief for the connected cable.

Weidmüller s 3.81pitch (0.15 inch) plugin connectors are compatible with the layouts of standard connectors and offer space for labelling and coding. roduct data IEC: 320 / 17.5 / 0.2 1.

101 Connectors in 3.81 pitch Series BC/SC 3.81 OMNIMTE Signal SCZ 3.81/../180 ZE Inverted male plug with screw connection and strain relief for the connected cable. Wiretowire connection with female plugs. Boardtowire connection with BCLSMT female header. vailable in closed (G) version, screw flange (F), inverted flange (FI) and with lock and release lever (LR). Weidmüller s 3.81pitch (0.15 inch) plugin connectors are compatible with the layouts of standard connectors and offer space for labelling and coding. roduct data IEC: 320 / 17.5 / ² UL: 300 / 10 / WG Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. Wire end ferrule with plastic collar to DIN 46228/4 on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. SCZ 3.81/../180GZE ++0, " 12,5 0.49" 18, " " 42, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance x 2.5 DIN C 40 C 1 III III II GF 0 Copper alloy tinned ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. SCSMT 3.81 KO GR Screwdriver SD 0,4x2,5x SDI 0,4x2,5x Colour orange black 3.81 ol. (inch) Qty. Order No. Order No Representative derating curve

Connectors in 3.81 pitch Series BC/SC 3.81 SCZ 3.81/../180FIZE SCZ 3.81/../180LRZE OMNIMTE Signal C + + 10,4 + + 0.409" 12,5 0.49" 18,4 0.726" 9 0.354" 42,1 1.657" + + 10,4 + + 0.409" 12,5 0.49" 18,4 0.726" 9 0.354" 42,1 1.657" + + 10,6 + + 0.

750 50 1237140000 1071810000 7 22.86 0.900 50 1237170000 1071820000 8 26.67 1.050 50 1237180000 1071830000 9 30.48 1.200 50 1237190000 1071840000 10 34.29 1.350 50 1237200000 1071850000 11 38.10 1.

102 Connectors in 3.81 pitch Series BC/SC 3.81 SCZ 3.81/../180FIZE SCZ 3.81/../180LRZE OMNIMTE Signal C , " 12,5 0.49" 18, " " 42, " , " 12,5 0.49" 18, " " 42, " , " 20, " 18, " " 42, " Colour orange black 3.81 ol. (inch) Qty. Order No. Order No Colour orange black 3.81 ol. (inch) Qty. Order No. Order No Colour orange black 3.81 ol. (inch) Qty. Order No. Order No dditional derating curves

103 Connectors in 3.81 pitch Series BC/SC 3.81 OMNIMTE Signal BCZ 3.81/../180 Female plug with screw connection. Wire outlet 180 (wire is straight on to the direction of plugging). vailable in closed version, with screw flange (F) and lock and releaselever (LR). roduct data IEC: 320 / 17.5 / ² UL: 300 / 10 / WG Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. Wire end ferrule without plastic collar to DIN 46228/1 Wire end ferrule with plastic collar to DIN 46228/4 on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. BCZ 3.81/../180 Weidmüller s 3.81pitch (0.15 inch) plugin connectors are compatible with the layouts of standard connectors and offer space for labelling and coding. + 16, " 11, " " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance x 2.5 DIN C 40 C 1 III III II GF 0 Copper alloy tinned ccessories Note: Refer to the ccessories chapter for additional accessories. Hood Order No. BCZ 3.81 H BCZ 3.81 H BCZ 3.81 H BCZ 3.81 H BCZ 3.81 H BCZ 3.81 H BCZ 3.81 H BCZ 3.81 H BCZ 3.81 H BCZ 3.81 H BCZ 3.81 H BCZ 3.81 H BCZ 3.81 H BCZ 3.81 H BCZ 3.81 H BCZ 3.81 H BCZ 3.81 H Screwdriver SD 0,4x2,5x SDI 0,4x2,5x Colour orange black 3.81 ol. (inch) Qty. Order No. Order No Representative derating curve

Connectors in 3.81 pitch Series BC/SC 3.81 BCZ 3.81/../180LR OMNIMTE Signal C + 3x + 2,8 + 3x + 0.109" 16,1 0.634" + 3x + 3 + 3x + 0.117" 20,6 0.81" 11,1 0.437" 20,3 0.799" 9 0.354" 9 0.

104 Connectors in 3.81 pitch Series BC/SC 3.81 BCZ 3.81/../180LR OMNIMTE Signal C + 3x + 2,8 + 3x " 16, " + 3x x " 20,6 0.81" 11, " 20, " " " Colour orange black 3.81 ol. (inch) Qty. Order No. Order No Colour orange black 3.81 ol. (inch) Qty. Order No. Order No dditional derating curves

Connectors in 3.81 pitch Series BC/SC 3.81 OMNIMTE Signal BCZ 3.81/../180 ZE Female plug with screw connection and strain relief for the connected cable.

105 Connectors in 3.81 pitch Series BC/SC 3.81 OMNIMTE Signal BCZ 3.81/../180 ZE Female plug with screw connection and strain relief for the connected cable. Wire outlet 180 (wire is straight on to the direction of plugging). vailable in closed version, with screw flange (F) and lock and releaselever (LR). roduct data IEC: 320 / 17.5 / ² UL: 300 / 10 / WG Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. Wire end ferrule without plastic collar to DIN 46228/1 Wire end ferrule with plastic collar to DIN 46228/4 on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. BCZ 3.81/../180ZE Weidmüller s 3.81pitch (0.15 inch) plugin connectors are compatible with the layouts of standard connectors and offer space for labelling and coding. + 16, " 12, " " 39, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance DIN C 40 C 1 III III II GF 0 Copper alloy ccessories Note: Refer to the ccessories chapter for additional accessories. Screwdriver Order No. SD 0,4x2,5x SDI 0,4x2,5x Colour orange black 3.81 ol. (inch) Qty. Order No. Order No Representative derating curve

Connectors in 3.81 pitch Series BC/SC 3.81 BCZ 3.81/../180LRZE OMNIMTE Signal C +3x+2,8 +3x+0.109" 16,1 0.634" +3x+3 +3x+0.117" 20,6 0.81" 12,5 0.492" 9 0.354" 39,8 1.565" 21,7 0.854" 9 0.354" 39,8 1.565" Colour orange black 3.

106 Connectors in 3.81 pitch Series BC/SC 3.81 BCZ 3.81/../180LRZE OMNIMTE Signal C +3x+2,8 +3x+0.109" 16, " +3x+3 +3x+0.117" 20,6 0.81" 12, " " 39, " 21, " " 39, " Colour orange black 3.81 ol. (inch) Qty. Order No. Order No Colour orange black 3.81 ol. (inch) Qty. Order No. Order No dditional derating curves

107 Connectors in 3.81 pitch Series BC/SC 3.81 OMNIMTE Signal BCZ 3.81/../90 & 270 Female plug with screw connection. Wire outlet direction: 90 wire perpendicular to plugging direction and above 270 wire perpendicular to plugging direction and below vailable in closed version and with screw flange (F). roduct data IEC: 320 / 17.5 / ² UL: 300 / 10 / WG Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. Wire end ferrule without plastic collar to DIN 46228/1 Wire end ferrule with plastic collar to DIN 46228/4 on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. BCZ 3.81/../ , " Weidmüller s 3.81pitch (0.15 inch) plugin connectors are compatible with the layouts of standard connectors and offer space for labelling and coding. 19, " 12, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance x 2.5 DIN C 40 C 1 III III II GF 0 Copper alloy tinned ccessories Note: Refer to the ccessories chapter for additional accessories. Screwdriver Order No. SD 0,4x2,5x SDI 0,4x2,5x Colour orange black 3.81 ol. (inch) Qty. Order No. Order No Representative derating curve

108 Connectors in 3.81 pitch Series BC/SC 3.81 BCZ 3.81/../270 BCZ 3.81/../270F OMNIMTE Signal + 3x + 2,8 + 3x " 10, " + 10, " + 3x + 2,8 + 3x " 10, " C 19, " 12, " 19, " 12, " 19, " 12, " Colour orange black 3.81 ol. (inch) Qty. Order No. Order No Colour orange black 3.81 ol. (inch) Qty. Order No. Order No Colour orange black 3.81 ol. (inch) Qty. Order No. Order No dditional derating curves

109 Connectors in 3.81 pitch Series BC/SC 3.81 OMNIMTE Signal BCF 3.81/../180 Female plug with USH IN wire connection. Simply insert the wire and it s ready. Integrated pushbutton for opening the terminal point High component density because of very low height, especially when combined with the compact doublelevel SCDN / SCDNTHR male header. vailable in closed version, with screw flange (F) and lock an releaselever (LR). roduct data IEC: 320 / 17.5 / ² UL: 300 / 10 / WG Note: dditional colours on request Goldplated contact surfaces on request We recoend crimp shape for wireend ferrules with crimping tools Z 1,5 (order no ) or Z 6/5 (order no ) for the larger wire crosssections. related to rated crosssection and min. No. of poles. Wire end ferrule without plastic collar to DIN 46228/1 Wire end ferrule with plastic collar to DIN 46228/4 on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. BCF 3.81/../ , " " Weidmüller s 3.81pitch (0.15 inch) plugin connectors are compatible with the layouts of standard connectors and offer space for labelling and coding. 7, " 15, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance x 2.5 DIN C 40 C 1 III III II GF 30 0 Copper alloy tinned ccessories Note: Refer to the ccessories chapter for additional accessories. Screwdriver Order No. SD 0,4x2,5x SDI 0,4x2,5x Crimping tool Z Z 6/ Colour orange black 3.81 ol. (inch) Qty. Order No. Order No Representative derating curve

110 Connectors in 3.81 pitch Series BC/SC 3.81 BCF 3.81/../180LR OMNIMTE Signal C + 14, " " + 14, " " 18, " 7, " 15, " 15, " Colour orange black 3.81 ol. (inch) Qty. Order No. Order No Colour orange black 3.81 ol. (inch) Qty. Order No. Order No dditional derating curves

111 Connectors in 3.81 pitch Series BC/SC 3.81 OMNIMTE Signal BCF 3.81/../180 ZE Female plug with strain relief (ZE) for the connected cable. USH IN wire connection method Simply insert the wire and attach the strain relief mechanism vailable in closed version with screw flange (F) and lock an releaselever (LR). roduct data IEC: 320 / 17.5 / ² UL: 300 / 10 / WG Note: dditional colours on request Goldplated contact surfaces on request We recoend crimp shape for wireend ferrules with crimping tools Z 1,5 (order no ) or Z 6/5 (order no ) for the larger wire crosssections. related to rated crosssection and min. No. of poles. Wire end ferrule without plastic collar to DIN 46228/1 Wire end ferrule with plastic collar to DIN 46228/4 on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. BCF 3.81/../180ZE Weidmüller s 3.81pitch (0.15 inch) plugin connectors are compatible with the layouts of standard connectors and offer space for labelling and coding. + 12, " 16, " " 39, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance x 2.5 DIN C 40 C III III II GF 30 0 Copper alloy tinned ccessories Note: Refer to the ccessories chapter for additional accessories. Screwdriver Order No. SD 0,4x2,5x SDI 0,4x2,5x Crimping tool Z Z 6/ Colour orange black 3.81 ol. (inch) Qty. Order No. Order No Representative derating curve

Connectors in 3.81 pitch Series BC/SC 3.81 BCF 3.81/../180LRZE OMNIMTE Signal C +3x+2,8 +3x+0.109" 16,1 0.634" +3x+3 +3x+0.117" 20,6 0.81" 12,5 0.492" 9 0.354" 39,8 1.565" 21,7 0.854" 9 0.354" 39,8 1.565" Colour orange black 3.

48 1.200 50 1236010000 1231390000 10 34.29 1.350 50 1236020000 1231410000 11 38.10 1.500 50 1236030000 1231420000 12 41.91 1.650 50 1236040000 1231430000 13 45.72 1.800 50 1236050000 1231440000 14 49.

112 Connectors in 3.81 pitch Series BC/SC 3.81 BCF 3.81/../180LRZE OMNIMTE Signal C +3x+2,8 +3x+0.109" 16, " +3x+3 +3x+0.117" 20,6 0.81" 12, " " 39, " 21, " " 39, " Colour orange black 3.81 ol. (inch) Qty. Order No. Order No Colour orange black 3.81 ol. (inch) Qty. Order No. Order No dditional derating curves

113 Connectors in 3.81 pitch Series BC/SC 3.81 OMNIMTE Signal BCLSMT 3.81/../90 Inverted female headers for: Touchsafety on the circuit board with boardtowire connection (with the SCZ) Boardtoboard component connection (with SC/SCSMT) Works with reflow soldering and automatic placement. Orientation: 90 vailable in closed version with screw Flange (F) and inverted solder flange (LFI). Weidmüller s 3.81pitch (0.15 inch) plugin connectors are compatible with the layouts of standard connectors and offer space for labelling and coding. roduct data IEC: 320 / 17.5 UL: 300 / 10 Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. BCLSMT 3.81/../90 + 4, " Ø 0, " L 1 6, " 7, " Ø 1,2 + 0, " 2,54 0.1" 3, " 14, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II LC GF 0 Copper alloy tinned ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Colour black ol. (inch) Qty. Order No Representative derating curve

114 Connectors in 3.81 pitch Series BC/SC 3.81 BCLSMT 3.81/../90F OMNIMTE Signal + 14, " 14, " + 14, " 14, " C Ø 0, " + 2 6, " Ø 1,2 + 0, " Ø 1,5 + 0, " 3, " 7, " Ø 0, " L 1 6, " Ø 1,2 + 0, " 3, " 7, " 2,54 1,4 0.1" 0.055" 2,54 0.1" Colour black ol. (inch) Qty. Order No Colour black ol. (inch) Qty. Order No dditional derating curves

115 Connectors in 3.81 pitch Series BC/SC 3.81 OMNIMTE Signal BCLSMT 3.81/../180 Inverted female headers for: Touchsafety on the circuit board with boardtowire (when connecting with the SCZ) Boardtoboard component connection (with SC/SCSMT) Works with reflow soldering and automatic placement. Orientation: 180 vailable in closed version and with invertetd solder flange (LFI). roduct data IEC: 320 / 17.5 UL: 300 / 10 Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. BCLSMT 3.81/../ , " 14, " 6, " Weidmüller s 3.81pitch (0.15 inch) plugin connectors are compatible with the layouts of standard connectors and offer space for labelling and coding. Ø 0, " 7, " Ø 1,3 + 0, " 1, " 3, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II LC GF 0 Copper alloy tinned ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Colour black ol. (inch) Qty. Order No Representative derating curve

Connectors in 3.81 pitch Series BC/SC 3.81 + 14,1 + 0.555" 6,7 0.264" C 14,5 0.571" OMNIMTE Signal Ø 0,8 0.031" + 2 7,9 0.311" Ø 1,2 + 0,1 0.047" Ø 1,5 + 0,1 0.059" 2 0.078" 3,81 0.15" 1,6 0.

116 Connectors in 3.81 pitch Series BC/SC , " 6, " C 14, " OMNIMTE Signal Ø 0, " + 2 7, " Ø 1,2 + 0, " Ø 1,5 + 0, " " 3, " 1, " Colour black ol. (inch) Qty. Order No dditional derating curves

Connectors in 5.00 and 5.08 pitch Series BL/SL 5.0x Explanation OMNIMTE Signal Male header SLSMT 5.0x and SLSMarT 5.

temperature insulating material LC (Liquid crystal polymer) permits seamless integration of the connections into the automated SMT production process, including

Integrated to fit your design daptable connection system the colour of the male headers can be adapted to the device design and not the other way around.

Standardcompliant fixing More benefit with less overhead: the patented solder flange reduces three steps into one while simultaneously protecting the solder

uniform drillhole diameter: no attachment of the fastening screw is required since the additional attachment is taken care of automatically during the solder

117 Connectors in 5.00 and 5.08 pitch Series BL/SL 5.0x Explanation OMNIMTE Signal Male header SLSMT 5.0x and SLSMarT 5.0x The connecting element in the reflow process Optimised for SMT (Surface Mount Technology) Innovative, application oriented male headers made from high temperature insulating material LC (Liquid crystal polymer) permits seamless integration of the connections into the automated SMT production process, including reflow soldering. The comprehensive portfolio impresses with significant gains in efficiency in assembly production, i.e. a reduction of manufacturing costs of up to 30 %, with increased process security and proven reliability. Integrated to fit your design daptable connection system the colour of the male headers can be adapted to the device design and not the other way around. Male headers made of LC available in black, grey or green. Standardcompliant fixing More benefit with less overhead: the patented solder flange reduces three steps into one while simultaneously protecting the solder location from continuous mechanical stress. uniform drillhole diameter: no attachment of the fastening screw is required since the additional attachment is taken care of automatically during the solder process SLSMarT: designed for automatic machine assembly ll pole counts are on board with only two articles needed in inventory and in feeder. patented design, with selfadjusting 2 and 3pole male header modules, results in a reduced number of varieties required and reduced costs. The security and efficiency of your process are increased because they can be processed without a ick & lace pad.

the width and pole count: this ensures that the feeders are used optimally and that the male headers are

5 short pins for flush solder joints permit CB assembly on both sides in accordance with IC 610 and also

118 Connectors in 5.00 and 5.08 pitch Series BL/SL 5.0x Explanation Delivered to fit your process: Tape packaging with optimised tape pockets customised to match the width and pole count: this ensures that the feeders are used optimally and that the male headers are securely positioned on the tape. OMNIMTE Signal C Specified to fit your application: 1.5 short pins for flush solder joints permit CB assembly on both sides in accordance with IC 610 and also reduces the solder paste volume significantly. t the same time, the required stroke length of the ick & lace machine is reduced to a minimum. s an alternative, 3.2 pins are available for CBs thicker than 1.6.

0x Optimised for wave soldering These male headers in 5.00 and 5.

standard headers used in industrial automation.

the basis for device connection systems for both wave and manual

Increased density for device connections: You can maximise connection

119 Connectors in 5.00 and 5.08 pitch Series BL/SL 5.0x Explanation OMNIMTE Signal Male header SL 5.0x Optimised for wave soldering These male headers in 5.00 and 5.08 pitch with the characteristics wave design in the mating face are the standard headers used in industrial automation. This male header has already enjoyed decades of market success; it is the basis for device connection systems for both wave and manual soldering. Increased density for device connections: You can maximise connection density by using doublelevel male headers together with your choice of connection systems on the field side. Three outlet directions: There are more device design possibilities created by the different conductor path angles.

male header and female plug The male header can also be screwed to the CB vailable

Goldplated male headers have gold plating on the functional surfaces but not on the

Integrated to fit your design daptable connection system the colour of the plug

Extensive accessories Light guides carry signals from the CB LEDs to the front

120 Connectors in 5.00 and 5.08 pitch Series BL/SL 5.0x Explanation Safe under vibration and shock ibration proof connection between male header and female plug The male header can also be screwed to the CB vailable with goldplated surfaces OMNIMTE Signal C Specified to fit your assembly process Goldplated male headers have gold plating on the functional surfaces but not on the solder surfaces. This prevents contamination of the solder bath. Integrated to fit your design daptable connection system the colour of the plug connectors fits to the device design and not the other way around. Extensive accessories Light guides carry signals from the CB LEDs to the front plate artitions can be used to visually separate the different functional areas of the male header. ll male headers can be manually coded or ordered as precoded headers.

Connectors in 5.00 and 5.08 pitch Series BL/SL 5.0x Explanation OMNIMTE Signal BLZ 5.

decades. The in the part name stands for an increase in security and efficiency in both fabrication and use.

reliability and much more user friendly operation.

This ensures a maintenance free and durable gastight connection.

deviations. Hybrid contacts The current bar and the tulip contact are made from two different materials and then welded together.

121 Connectors in 5.00 and 5.08 pitch Series BL/SL 5.0x Explanation OMNIMTE Signal BLZ 5.0x luggable, universal screw connection The BLZ is the functional extension of the BLZ series, which has proven itself on the market for decades. The in the part name stands for an increase in security and efficiency in both fabrication and use. Resulting from this are additional customer benefits, such as a continuous function and safety chain, increased efficiency and process reliability and much more user friendly operation. Folded steel clamping yoke When the screw on the clamp is tightened, there is a counter effect in the clamping yoke s threaded area. This ensures a maintenance free and durable gastight connection. In addition, the elastic behaviour of the clamping yoke compensates for the setting of the connected wire and any temperature induced deviations. Hybrid contacts The current bar and the tulip contact are made from two different materials and then welded together. The current bar has high conductivity and the tulip contact is characterised by its excellent spring properties. Safe connection errorfree wiring The integrated wire guard feature prevents dangerous insertion of the wire below the clamping area and thus protects against contact or insertion errors. Securely lock simply release Fast, selflocking with the male header for toolfree handling. Releasing of the female plug is gentle on components.

0x Explanation Safe contacting universal

for uncomplicated operation with standard

OMNIMTE Signal Conductor outlet direction

122 Connectors in 5.00 and 5.08 pitch Series BL/SL 5.0x Explanation Safe contacting universal operation Globally compatible screw head for uncomplicated operation with standard hand tools or power tools. OMNIMTE Signal Conductor outlet direction up/down 270 C 90 Conductor outlet direction straight/inclined Locking options LR F 8 4 F = screw flange / LR = Lock & Release lever rocesscompatible by default economical processing Unpack Wire Ready Connect. The Wire Ready technology ensures that all clamping units are fully open on delivery, even after worldwide shipping.

Connectors in 5.00 and 5.08 pitch Series BL/SL 5.0x Explanation OMNIMTE Signal BLT 5.

This greatly simplifies device design because the cable entry and screw are located in the same plane of the plugin connector.

2 Minimal height With a height of only 12.2, the BLT is currently the smallest TO connection available.

123 Connectors in 5.00 and 5.08 pitch Series BL/SL 5.0x Explanation OMNIMTE Signal BLT 5.08 Female plug for limites space installation locations The BLT range is the most compact TO connection of its type available in 5.08 pitch. This greatly simplifies device design because the cable entry and screw are located in the same plane of the plugin connector. With the wire connection parallel to the circuit board, the BLT is specialised for use in limited installation spaces and high packing densities Minimal height With a height of only 12.2, the BLT is currently the smallest TO connection available. High component density Normal screw terminals have a 90 angle between the directions of the cable entry and the screw. The required space must then be taken into account when designing the device. However with the TO connection system, the directions for wire entry and clamping operations are the same.

header for toolfree handling. Releasing of the female plug is gentle on components.

wire is pulled in to the clamping point for a securely established contact.

124 Connectors in 5.00 and 5.08 pitch Series BL/SL 5.0x Explanation Secure interlock and simple release Fast, selflocking with the male header for toolfree handling. Releasing of the female plug is gentle on components. OMNIMTE Signal 4 8 C rocesscompatible by default economical processing Unpack Wire Ready Connect. The Wire Ready technology ensures that all clamping units are fully open on delivery, even after worldwide shipping. Safe to use with nofault wiring: The BLT s pull effect ensures that the connected wire is pulled in to the clamping point for a securely established contact. Hybrid contacts For every function, the best material. The current bar and the tulip contact are made from two different materials and then welded together. The current bar has high conductivity and the tulip contact is characterised by its excellent spring properties.

Connectors in 5.00 and 5.08 pitch Series BL/SL 5.0x Explanation OMNIMTE Signal BLF 5.0x and BLDF 5.

variety of applications: The plugs are available for all wire outlet directions (90, 180 and 270 ) and also as a double connector with integrated crossconnection for bus

Hybrid contacts The current bar and the tulip contact are made from two different materials and then welded together.

125 Connectors in 5.00 and 5.08 pitch Series BL/SL 5.0x Explanation OMNIMTE Signal BLF 5.0x and BLDF 5.08 female plugs with USH IN technology ä The quick USH IN connection is now also available in pitches of 5.00 and The products are simple, safe and can be used in a variety of applications: The plugs are available for all wire outlet directions (90, 180 and 270 ) and also as a double connector with integrated crossconnection for bus applications. The hybrid contacts used in combination with USH IN guarantee a vibration resistant and maintenancefree connection, even under extreme conditions. Hybrid contacts The current bar and the tulip contact are made from two different materials and then welded together. The current bar has high conductivity and the tulip contact is characterised by its excellent spring properties. llpurpose usage: ery large clamping range from 0.2 ² to 2.5 ² even when using ferrules with plastic collars. Can be tested at any time: Simplified functional testing using easily accessible diagnostic test points.

control buttons ensure userfriendly operation.

voltage drop and allows a powerful 22 bus power which can supply a

OMNIMTE Signal C Directly plugged in 100 % 20 s 75 % 50 % 18 %

compared to screw connections 10 s 50 % 7 s 7 s 10 s time saving

Spring terminals USH IN Simply fast ä USH IN: toolfree connections of

com Simple and selfexplanatory llround safety stainless steel cage

126 Connectors in 5.00 and 5.08 pitch Series BL/SL 5.0x Explanation Safe to operate Rounded edges and large, nonslip control buttons ensure userfriendly operation. Extremely durable The integrated crossconnector is designed for a low voltage drop and allows a powerful 22 bus power which can supply a high number of notes in the bus system. OMNIMTE Signal C Directly plugged in 100 % 20 s 75 % 50 % 18 % flexible 16 s 16 s flexible with ferrule solid 80 % time saving compared to screw connections 10 s 50 % 7 s 7 s 10 s time saving compared to tensionclamp connections 3,5 s 3,5 s Screw terminals Spring terminals USH IN Simply fast ä USH IN: toolfree connections of preprepared wires into the wireentry funnel. Simple and selfexplanatory llround safety stainless steel cage enclosure prevents subsidence in the contact area. To prevent any drop in clamping force plastic parts were deliberately not used. Intuitive opening of the terminal point using conspicuous push buttons.

127 Connectors in 5.00 and 5.08 pitch Series BL/SL 5.0x Explanation OMNIMTE Signal Female plug BLC 5.08 Cost effective and preassembled using a crimp connection The BLC product family with crimp connections provides an affordable solution with preassembled female plugs that is also appropriate for large batch jobs. The contacts can be crimped by using hand tools or with a crimping machine in the factory when producing large batches Minimal height The very low height of only 10.1 enables higher packaging density Effective and costeffective By using high performance metals, a costly overspring on the tulip contact can be avoided. This cost saving is passed directly to the customer. rocesscompatible by default economical processing Delivery of the crimp contacts loose in bags, or as tapepackaged carrier strips. For the following conductor sizes: 0.22 to 0.35 ², 0.50 to 1.00 ², 1.50 to 2.50 ².

ffordable machine crimping or with hand tools in the field.

a 90 angle between the directions of the cable entry and the

The required space must then be taken into account when

In the crimp connector system, however, the conductor

128 Connectors in 5.00 and 5.08 pitch Series BL/SL 5.0x Explanation Flexible for a variety of applications ffordable machine crimping or with hand tools in the field. OMNIMTE Signal C High component density Screw terminals have a 90 angle between the directions of the cable entry and the screw. The required space must then be taken into account when designing the device. In the crimp connector system, however, the conductor insertion and operation is parallel to the circuit board. Safe to use with nofault wiring: The crimp contact is crimped on a stripped wire and then snapped in to the female plug and it s ready!

129 Connectors in 5.00 pitch Series BL/SL 5.00 Quick selection OMNIMTE Signal OMNIMTE Signal 5.00 = Wire to board = Wire to wire = Board to wire = Board to board Orientation 270º 180º 135º 90º 90º 270º 180º 225º Solder connection Levels 1 2 Type SL SL SL SLD Orientation Flange options (O)/B (O)/B (O)/B G age C.144 C.148 C.146 C.150 Screw: Clamping yoke BLZ 180 (G)/F/LR C.152 BLZ 90 (G)/F/LR C.154 Female plug Spring: USH IN BLZ 270 (G)/F/LR C.156 BLF 180 (G)/F/LR C.158 BLF 90 (G)/F/LR C.160 Female plug and header: (G)* = Closed (without flange) F = Flange with screw LR = Lock & Release lever * not included in the article description Male header and plug: (O)* = open B = Dovetail for fixing blocks with a nut G = closed F = Screw flange with nut LF = Solder flange with nut GLF = closed with additional solder flange FLF = Flange with nut and additional solder flange

130 Connectors in 5.00 pitch Series BL/SL 5.00 Quick selection Male header Reflow solder connection OMNIMTE Signal SLD SLSMT SLSMT SLSMarT SLSMarT SLDTHR G (O)/G/LF (O)/G/LF (O) (O) G/GLF/F/FLF C.151 C.134 C.138 C.182 C.183 C.142 C

131 Connectors in 5.00 pitch Series BL/SL 5.00 OMNIMTE Signal SLSMT 5.00/../90 roduct data Note: SLSMT 5.00/../90 Box ackaged in box Hightemperatureresistant, 90 angled male header, optimised for SMT processing. The male headers can be manually coded or ordered as precoded headers. vailable in open, closed (G) or with solder Flange (LF). The solder flange makes an additional screwfixation to the CB unnecessary and protects the solder joints against mechanical stress. vailable with 1.5 or 3.2 solder pins. acked either in box (BX) or an antistatic roll (tapeonreel, RL) The 1.5 solder pin reduces the solder paste to a minimum without loosing holding force to the CB. L " 8, " D " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II LC GF 0 CuSn tinned 1.2, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BLZ/SL KO OR BLZ/SL KO SW artition element SL T OR SL T SW LED light guide SL FL 1.5/ SL FL 1.5/ SL FL 2,3/ SL FL 2,3/ SL FL 3.8/ SL FL 3.8/ SL FL 9.0/ SL FL 9.0/ Colour black black 5.00 ol. (inch) Qty. Order No. Order No

132 Connectors in 5.00 pitch Series BL/SL 5.00 Tapeonreel SLSMT 5.00/../90G Box SLSMT 5.00/../90G Tape Tapeonreel OMNIMTE Signal " + + 3, " " " C W 8, " " W D ITCH 16 TE FEED DIRECTION ITCH 16 TE FEED DIRECTION Colour black ol. (inch) Qty. Order No Tape widths: 32, 44, 56, 72, Colour black black 5.00 ol. (inch) Qty. Order No. Order No Colour black ol. (inch) Qty. Order No Tape widths: 32, 44, 56, 72, 88

133 Connectors in 5.00 pitch Series BL/SL 5.00 OMNIMTE Signal SLSMT 5.00/../90 roduct data Note: SLSMT 5.00/../90LF Box Hightemperatureresistant, 90 angled male header, optimised for SMT processing. The male headers can be manually coded or ordered as precoded headers. vailable in open, closed (G) or with solder Flange (LF). The solder flange makes an additional screwfixation to the CB unnecessary and protects the solder joints against mechanical stress. vailable with 1.5 or 3.2 solder pins. acked either in box (BX) or an antistatic roll (tapeonreel, RL) The 1.5 solder pin reduces the solder paste to a minimum without loosing holding force to the CB. ++9, " +2x D 8, " " " " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II LC GF 0 CuSn tinned 1.2, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BLZ/SL KO OR BLZ/SL KO SW artition element SL T OR SL T SW LED light guide SL FL 1.5/ SL FL 1.5/ SL FL 2,3/ SL FL 2,3/ SL FL 3.8/ SL FL 3.8/ SL FL 9.0/ SL FL 9.0/ Colour black black 5.00 ol. (inch) Qty. Order No. Order No

134 Connectors in 5.00 pitch Series BL/SL 5.00 Tapeonreel; with solder flange " Solder flange (LF) Normally you use a pin header with fastening flanges (F) in combination with a screw from the rear side of the CB to increase the fixation forces of the pin headers. The disadvantages are additional process steps that make the CB mounting complex and cost intensive. The patented solder flange was designed to solve exactly this problem and find a simple and cheap solution. The additional solder pins substitute the present screw flanges and they get soldered together with the pin header. This terminates additional process steps and thus reduces production costs. The additional fixation protects the soldered connections from tensile strain and avoids permanent mechanical stress such as caused by the postfastened screw forces. OMNIMTE Signal C W ITCH 16 TE FEED DIRECTION Colour black ol. (inch) Qty. Order No Tape widths: 32, 44, 56, 72, 88

135 Connectors in 5.00 pitch Series BL/SL 5.00 OMNIMTE Signal SLSMT 5.00/../180 Hightemperatureresistant, 180 angled male header, optimised for SMT processing. The male headers can be manually coded or ordered as precoded headers. vailable in open, closed (G) or with solder Flange (LF). The solder flange makes an additional screwfixation to the CB unnecessary and protects the solder joints against mechanical stress. vailable with 1.5 or 3.2 solder pins. acked either in box (BX) or an antistatic roll (tapeonreel, RL) The 1.5 solder pin reduces the solder paste to a minimum without loosing holding force to the CB. roduct data IEC: 400 / 19 UL: 300 / 15 Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. Diameter of solder eyelet D = Diameter of solder eyelet D = from 9pole on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. SLSMT 5.00/../180 Box ackaged in box L " D 3, " 8, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II LC GF 0 CuSn tinned 1.2, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BLZ/SL KO OR BLZ/SL KO SW artition element SL T OR SL T SW Colour black black 5.00 ol. (inch) Qty. Order No. Order No

136 Connectors in 5.00 pitch Series BL/SL 5.00 Tapeonreel SLSMT 5.00/../180G Box ackaged in box SLSMT 5.00/../180G Tape Tapeonreel OMNIMTE Signal " + + 3, " 8, " C W W " " 3, " ITCH 16 D ITCH 16 TE FEED DIRECTION TE FEED DIRECTION Colour black ol. (inch) Qty. Order No Tape widths: 32, 44, 56, 72, Colour black black 5.00 ol. (inch) Qty. Order No. Order No Colour black ol. (inch) Qty. Order No Tape widths: 32, 44, 56, 72, 88

137 Connectors in 5.00 pitch Series BL/SL 5.00 OMNIMTE Signal SLSMT 5.00/../180 Hightemperatureresistant, 180 angled male header, optimised for SMT processing. The male headers can be manually coded or ordered as precoded headers. vailable in open, closed (G) or with solder Flange (LF). The solder flange makes an additional screwfixation to the CB unnecessary and protects the solder joints against mechanical stress. vailable with 1.5 or 3.2 solder pins. acked either in box (BX) or an antistatic roll (tapeonreel, RL) The 1.5 solder pin reduces the solder paste to a minimum without loosing holding force to the CB. roduct data IEC: 400 / 19 UL: 300 / 15 Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. SLSMT 5.00/../180LF Box ackaged in box; with solder flange ++9, " +2x " 8, " 3,8 0.15" D Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II LC GF 0 CuSn tinned 1.2, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BLZ/SL KO OR BLZ/SL KO SW artition element SL T OR SL T SW Colour black black 5.00 ol. (inch) Qty. Order No. Order No

138 Connectors in 5.00 pitch Series BL/SL 5.00 Tapeonreel; with solder flange Solder flange (LF) Normally you use a pin header with fastening flanges (F) in combination with a screw from the rear side of the CB to increase the fixation forces of the pin headers. The disadvantages are additional process steps that make the CB mounting complex and cost intensive. The patented solder flange was designed to solve exactly this problem and find a simple and cheap solution. The additional solder pins substitute the present screw flanges and they get soldered together with the pin header. This terminates additional process steps and thus reduces production costs. The additional fixation protects the soldered connections from tensile strain and avoids permanent mechanical stress such as caused by the postfastened screw forces. OMNIMTE Signal C W " ITCH 16 TE FEED DIRECTION Colour black ol. (inch) Qty. Order No Tape widths: 32, 44, 56, 72, 88

139 Connectors in 5.00 pitch Series BL/SL 5.00 OMNIMTE Signal SLDTHR 5.00/../180 Doublelevel, 180 male header, optimised for the SMT process. The connection levels are offset and designed for a female plug with screw connection or USH IN wire connect. The male headers can be manually coded or ordered as precoded headers. vailable in closed (G), with solder Flange (GLF), screw flange (F) or screw & solder flange (FLF). The solder flange makes an additional screwfixation to the CB unnecessary and protects the solder joints against mechanical stress. vailable with 1.5 or 3.2 solder pins. The 1.5 solder pin reduces the solder paste to a minimum without loosing holding force to the CB. The FLF version is featured with a soldering flange and an additional screwfastening possibility to the CB. roduct data IEC: 400 / 15 UL: 300 / 10 Note: dditional colours on request related to rated crosssection and min. No. of poles. Spacing between rows: see hole layout on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. SLDTHR 5.00/../180G without solder flange D 7,63 0.3" x + 8, " 3 x " 26, " /2 8, " 3 x 4, " " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II LC GF 0 CuSn tinned 1.2, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BLZ/SL KO OR BLZ/SL KO SW artition element SL T OR SL T SW Colour black black 5.00 ol. (inch) Qty. Order No. Order No

Connectors in 5.00 pitch Series BL/SL 5.00 with solder flange SLDTHR 5.00/../180F without solder flange SLDTHR 5.00/../180FLF with solder flange OMNIMTE Signal + + 3 + + 0.118" 3 x + 8,43 3 x + 0.

140 Connectors in 5.00 pitch Series BL/SL 5.00 with solder flange SLDTHR 5.00/../180F without solder flange SLDTHR 5.00/../180FLF with solder flange OMNIMTE Signal " 3 x + 8,43 3 x " + 3 x 3 x + 8,43 3 x " x + 8,43 3 x " C " 26, " D /2 8, " 6, " 4, " 4, " 7,63 0.3" " " 26, " 26, " D + 2 x /2 8, " D + 2x /2 8, " 6, " 4, " 3 x 3 x 3 x Ø 2,8 0.11" Ø 2,8 0.11" Colour black black 5.00 ol. (inch) Qty. Order No. Order No Colour black black 5.00 ol. (inch) Qty. Order No. Order No Colour black black 5.00 ol. (inch) Qty. Order No. Order No

Connectors in 5.00 pitch Series BL/SL 5.00 OMNIMTE Signal SL 5.00/../90 Male headers with 90 orientation, optimised for wave soldering. vailable in versions with either open or closed ends (B).

141 Connectors in 5.00 pitch Series BL/SL 5.00 OMNIMTE Signal SL 5.00/../90 Male headers with 90 orientation, optimised for wave soldering. vailable in versions with either open or closed ends (B). Mounting blocks can be attached onto the closed variants. The blocks can be used to screw on to the female plug of the circuit board. The male headers can be manually coded or ordered as precoded headers. roduct data IEC: 400 / 18 UL: 300 / 15 Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. SL 5.00/../90 L " 8,4 0.33" 10, " 1,3+0, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II BT 0 CuSn tinned 1.2, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BLZ/SL KO OR BLZ/SL KO SW artition element SL T OR SL T SW LED light guide SL FL 1.5/ SL FL 1.5/ SL FL 2,3/ SL FL 2,3/ SL FL 3.8/ SL FL 3.8/ SL FL 9.0/ SL FL 9.0/ Mounting block SL BB11R OR SL BB11R SW Colour orange ol. (inch) Qty. Order No

142 Connectors in 5.00 pitch Series BL/SL 5.00 L " " C 8,4 0.33" OMNIMTE Signal 1,3+0, " 10, " Colour orange ol. (inch) Qty. Order No

Connectors in 5.00 pitch Series BL/SL 5.00 OMNIMTE Signal SL 5.00/../180 Male headers with 180 orientation, optimised for wave soldering. vailable in versions with either open or closed ends (B).

143 Connectors in 5.00 pitch Series BL/SL 5.00 OMNIMTE Signal SL 5.00/../180 Male headers with 180 orientation, optimised for wave soldering. vailable in versions with either open or closed ends (B). Mounting blocks can be attached onto the closed variants. The blocks can be used to screw on to the female plug of the circuit board. The male headers can be manually coded or ordered as precoded headers. roduct data IEC: 400 / 18 UL: 300 / 15 Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. SL 5.00/../180 L " 8,4 0.33" 3, " 1,3+0, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II BT 0 CuSn tinned 1.2, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BLZ/SL KO OR BLZ/SL KO SW artition element SL T OR SL T SW Mounting block SL BB11R OR SL BB11R SW Colour orange ol. (inch) Qty. Order No

Connectors in 5.00 pitch Series BL/SL 5.00 L 1 + + 2 ++0.078" 8,4 0.33" C 12 0.472" OMNIMTE Signal 3,8 0.150" 1,3+0,1 0.051" Colour 5.00 3.2 orange ol. (inch) Qty. Order No. 2 5.00 0.

144 Connectors in 5.00 pitch Series BL/SL 5.00 L " 8,4 0.33" C " OMNIMTE Signal 3, " 1,3+0, " Colour orange ol. (inch) Qty. Order No

145 Connectors in 5.00 pitch Series BL/SL 5.00 OMNIMTE Signal SL 5.00/../135 Male headers with 135 orientation, optimised for wave soldering. vailable in versions with either open or closed ends (B). Mounting blocks can be attached onto the closed variants. The blocks can be used to screw on to the female plug of the circuit board. The male headers can be manually coded or ordered as precoded headers. roduct data IEC: 400 / 17 UL: 300 / 15 Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. SL 5.00/../135 L , " 13, " Ø1,3+0, " 9, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II BT 0 CuSn tinned 1.2, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BLZ/SL KO OR BLZ/SL KO SW artition element SL T OR SL T SW Mounting block SL 135 BB15R OR SL 135 BB15R SW Colour orange ol. (inch) Qty. Order No

146 Connectors in 5.00 pitch Series BL/SL 5.00 L " 13, " C 12, " OMNIMTE Signal Ø1,3+0, " 9, " Colour orange ol. (inch) Qty. Order No

147 Connectors in 5.00 pitch Series BL/SL 5.00 OMNIMTE Signal SLD 5.00/../90 & 180 Doublelevel male header optimised for wave soldering. The connections are at the same level with access that is flush over the front board. The male headers can be manually coded or ordered as precoded headers. roduct data IEC: 400 / 11 UL: 300 / 10 Note: dditional colours on request related to rated crosssection and min. No. of poles. Spacing between rows: see hole layout on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. SLD 5.00/../90G ++1, " " 28, " 1,3+0, " 9, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II BT 0 CuSn tinned 1.2, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BLZ/SL KO OR BLZ/SL KO SW artition element SL T OR SL T SW Colour orange ol. (inch) Qty. Order No

148 Connectors in 5.00 pitch Series BL/SL , , " C " 1,3+0, " 3, " 20, OMNIMTE Signal Colour orange ol. (inch) Qty. Order No

149 Connectors in 5.00 pitch Series BL/SL 5.00 OMNIMTE Signal BLZ 5.00/../180 The BLZ is the functional extension of the BLZ series. The in the part name stands for a plus in security and performance in processing and use. WIRE REDY delivered with terminal points already opened ower tools can be used with the globally compatible plus/minus screw head Folded steel clamping yoke accoodates the connected wire and compensates for temperature fluctuations The integrated wire guard prevents dangerous underinsertion of the wire from occurring. Lock and releaselever: toolless locking and gentle releasing of the connector reduces the mechanical stress on the solder joints. roduct data IEC: 400 / 19 / ² UL: 300 / 10 / WG Note: dditional colours on request related to rated crosssection and min. No. of poles. Wire end ferrule without plastic collar to DIN 46228/1 Wire end ferrule with plastic collar to DIN 46228/4 on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. BLZ 5.00/../ " 20, " 11, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance x 3.5 DIN C 40 C 4 III III II BT 0 Copper alloy tinned ccessories Note: Refer to the ccessories chapter for additional accessories. Strain relief Order No. BLZ 5.00 ZE4 OR BLZ 5.00 ZE4 SW BLZ 5.00 ZE8 OR BLZ 5.00 ZE8 SW Coding BLZ/SL KO OR BLZ/SL KO SW Screwdriver SD 0,6x3,5x SDI 0,6x3,5x Crosshead screwdriver SDK H SDK Z Colour orange black 5.00 ol. (inch) Qty. Order No. Order No Representative derating curve

150 Connectors in 5.00 pitch Series BL/SL , " + 20, " BLZ 5.00/../180LR with lock and release lever + + 9, " 20, " The 2in1 contact Every pluggable connector covers two contact points and thus must meet two different requirements: First, the wire termination and second, the connection between plug and pin header. Referring to the 5.0x pitch series, Weidmüller offers different wire connection technologies, but one platform contact for the male / female connection since years. This welldesigned hybride platform contact ensures a constant quality on a very high level. Hybride means, that we combine metal material featuring different characteristics by welding, in order to devide the contact system into different function zones: Further to the high electric conductance, the current bar is characterized by its hardness, and the tulip contact by its excellent tension properties. The advantage: each function is supported by the most suitable material to reliably and constantly meet the different electrical and mechanical requirements. To put it in a nutshell: Instead of either... or, it s even both perfect for the current, and perfect for the force. C " " " OMNIMTE Signal 11, " 11, " Colour orange black 5.00 ol. (inch) Qty. Order No. Order No Colour orange black 5.00 ol. (inch) Qty. Order No. Order No dditional derating curves

151 Connectors in 5.00 pitch Series BL/SL 5.00 OMNIMTE Signal BLZ 5.00/../90 The BLZ is the functional extension of the BLZ series. The in the part name stands for a plus in security and performance in processing and use. WIRE REDY delivered with terminal points already opened ower tools can be used with the globally compatible plus/minus screw head Folded steel clamping yoke accoodates the connected wire and compensates for temperature fluctuations The integrated wire guard prevents dangerous underinsertion of the wire from occurring. Lock and releaselever: toolless locking and gentle releasing of the connector reduces the mechanical stress one the solder joints. roduct data IEC: 400 / 15.5 / ² UL: 300 / 10 / WG Note: dditional colours on request related to rated crosssection and min. No. of poles. Wire end ferrule without plastic collar to DIN 46228/1 Wire end ferrule with plastic collar to DIN 46228/4 on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. BLZ 5.00/../ , " 14, " 18, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance x 3.5 DIN C 40 C 4 III III II BT 0 Copper alloy tinned ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BLZ/SL KO OR BLZ/SL KO SW Screwdriver SD 0,6x3,5x SDI 0,6x3,5x Crosshead screwdriver SDK H SDK Z Colour orange black 5.00 ol. (inch) Qty. Order No. Order No Representative derating curve

152 Connectors in 5.00 pitch Series BL/SL , " 14, " 27, " 18, " The 2in1 contact Every pluggable connector covers two contact points and thus must meet two different requirements: First, the wire termination and second, the connection between plug and pin header. Referring to the 5.0x pitch series, Weidmüller offers different wire connection technologies, but one platform contact for the male / female connection since years. This welldesigned hybride platform contact ensures a constant quality on a very high level. Hybride means, that we combine metal material featuring different characteristics by welding, in order to devide the contact system into different function zones: Further to the high electric conductance, the current bar is characterized by its hardness, and the tulip contact by its excellent tension properties. The advantage: each function is supported by the most suitable material to reliably and constantly meet the different electrical and mechanical requirements. To put it in a nutshell: Instead of either... or, it s even both perfect for the current, and perfect for the force. OMNIMTE Signal C + Colour orange black 5.00 ol. (inch) Qty. Order No. Order No dditional derating curves

153 Connectors in 5.00 pitch Series BL/SL 5.00 OMNIMTE Signal BLZ 5.00/../270 The BLZ is the functional extension of the BLZ series. The in the part name stands for a plus in security and performance in processing and use. WIRE REDY delivered with terminal points already opened ower tools can be used with the globally compatible plus/minus screw head Folded steel clamping yoke accoodates the connected wire and compensates for temperature fluctuations The integrated wire guard prevents dangerous underinsertion of the wire from occurring. Lock and releaselever: toolless locking and gentle releasing of the connector reduces the mechanical stress one the solder joints. roduct data IEC: 400 / 15.5 / ² UL: 300 / 10 / WG Note: dditional colours on request related to rated crosssection and min. No. of poles. Wire end ferrule without plastic collar to DIN 46228/1 Wire end ferrule with plastic collar to DIN 46228/4 on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. BLZ 5.00/../ , " 14, " 18, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance x 3.5 DIN C 40 C 4 III III II BT 0 Copper alloy tinned ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BLZ/SL KO OR BLZ/SL KO SW Screwdriver SD 0,6x3,5x SDI 0,6x3,5x Crosshead screwdriver SDK H SDK Z Colour orange black 5.00 ol. (inch) Qty. Order No. Order No Representative derating curve

154 Connectors in 5.00 pitch Series BL/SL , " 27, " 14, " 18, " BLZ 5.00/../270LR with lock and release lever + + 9, " 27, " 21, " 18, " The 2in1 contact Every pluggable connector covers two contact points and thus must meet two different requirements: First, the wire termination and second, the connection between plug and pin header. Referring to the 5.0x pitch series, Weidmüller offers different wire connection technologies, but one platform contact for the male / female connection since years. This welldesigned hybride platform contact ensures a constant quality on a very high level. Hybride means, that we combine metal material featuring different characteristics by welding, in order to devide the contact system into different function zones: Further to the high electric conductance, the current bar is characterized by its hardness, and the tulip contact by its excellent tension properties. The advantage: each function is supported by the most suitable material to reliably and constantly meet the different electrical and mechanical requirements. To put it in a nutshell: Instead of either... or, it s even both perfect for the current, and perfect for the force. OMNIMTE Signal C 14, " Colour orange black 5.00 ol. (inch) Qty. Order No. Order No Colour orange black 5.00 ol. (inch) Qty. Order No. Order No

155 Connectors in 5.00 pitch Series BL/SL 5.00 OMNIMTE Signal BLF 5.00/../180 USH IN Weidmüller s innovative connection system simplifies and accelerates the wire connection process. Solid wires and stranded wires with ferrules need only to be inserted and they are ready. The actuator must be used when connecting stranded wires without ferrules. Intuitive handling since the wireentry area and handling area are clearly separated. Userfriendly handling with rounded outer edges and large, noslip push buttons. Lock and release lever: toolless locking and a gentle releasing of the connector reduces the mechanical stress to the solder soints. roduct data IEC: 400 / 20.5 / ² UL: 300 / 10 / WG Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. Wire end ferrule without plastic collar to DIN 46228/1 Wire end ferrule with plastic collar to DIN 46228/4 on drg. = pitch BLF 5.00/../ , " 14, " 19, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance x 3.5 DIN C 40 C 2.5 III III II BT 0 CuSn tinned ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BLZ/SL KO OR BLZ/SL KO SW Screwdriver SD 0,6x3,5x SDI 0,6x3,5x Wireend ferrule H0,5/14S W H1,0/14S R H1,5/14S SW H2,5/14S BL Colour orange black 5.00 ol. (inch) Qty. Order No. Order No Representative derating curve

156 Connectors in 5.00 pitch Series BL/SL 5.00 BLF 5.00/../180LR USH IN connection technology USH IN connection technology reduces the wiring affords especially for solid wires and wires with ferrule to a minimum. These connectors are selfexplanary and enable toolless handling. The contact element made of stainless steel ensures a vibration prooved, maintainance free wire termination. The established principle STEEL FOR THE FORCE, COER FOR THE CURRENT by Weidmüller offers both, maximum conductor clamping forces, as well as minimum power loss at the same time. OMNIMTE Signal C + + 9, " 27, " + + 9, " 27, " 14, " 14, " 18, " 19, " 19, " Colour orange black 5.00 ol. (inch) Qty. Order No. Order No Colour orange black 5.00 ol. (inch) Qty. Order No. Order No The 2in1 contact Every pluggable connector covers two contact points and thus must meet two different requirements: First, the wire termination and second, the connection between plug and pin header. Referring to the 5.0x pitch series, Weidmüller offers different wire connection technologies, but one platform contact for the male / female connection since years. This welldesigned hybride platform contact ensures a constant quality on a very high level. Hybride means, that we combine metal material featuring different characteristics by welding, in order to devide the contact system into different function zones: Further to the high electric conductance, the current bar is characterized by its hardness, and the tulip contact by its excellent tension properties. The advantage: each function is supported by the most suitable material to reliably and constantly meet the different electrical and mechanical requirements. To put it in a nutshell: Instead of either... or, it s even both perfect for the current, and perfect for the force.

157 Connectors in 5.00 pitch Series BL/SL 5.00 OMNIMTE Signal BLF 5.00/../90 USH IN Weidmüller s innovative connection system simplifies and accelerates the wire connection process. Solid wires and stranded wires with ferrules need only to be inserted and they are ready. The actuator must be used when connecting stranded wires without ferrules. Intuitive handling since the wireentry area and handling area are clearly separated. Userfriendly handling with rounded outer edges and large, noslip push buttons. Lock and release lever: toolless locking and a gentle releasing of the connector reduces the mechanical stress to the solder soints. roduct data IEC: 400 / 20 / ² UL: 300 / 10 / WG Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. Wire end ferrule without plastic collar to DIN 46228/1 Wire end ferrule with plastic collar to DIN 46228/4 on drg. = pitch BLF 5.00/../ , " 26, " 17, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance x 3.5 DIN C 40 C 2.5 III III II BT 0 CuSn tinned ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BLZ/SL KO OR BLZ/SL KO SW Screwdriver SD 0,6x3,5x SDI 0,6x3,5x Wireend ferrule H0,5/14S W H1,0/14S R H1,5/14S SW H2,5/14S BL Colour orange black 5.00 ol. (inch) Qty. Order No. Order No Representative derating curve

158 Connectors in 5.00 pitch Series BL/SL 5.00 BLF 5.00/../90LR with lock and release lever USH IN connection technology USH IN connection technology reduces the wiring affords especially for solid wires and wires with ferrule to a minimum. These connectors are selfexplanary and enable toolless handling. The contact element made of stainless steel ensures a vibration prooved, maintainance free wire termination. The established principle STEEL FOR THE FORCE, COER FOR THE CURRENT by Weidmüller offers both, maximum conductor clamping forces, as well as minimum power loss at the same time. OMNIMTE Signal C + + 9, " 20, " + + 9, " 22, " 26, " 17, " 26, " 17, " Colour orange black 5.00 ol. (inch) Qty. Order No. Order No Colour orange black 5.00 ol. (inch) Qty. Order No. Order No The 2in1 contact Every pluggable connector covers two contact points and thus must meet two different requirements: First, the wire termination and second, the connection between plug and pin header. Referring to the 5.0x pitch series, Weidmüller offers different wire connection technologies, but one platform contact for the male / female connection since years. This welldesigned hybride platform contact ensures a constant quality on a very high level. Hybride means, that we combine metal material featuring different characteristics by welding, in order to devide the contact system into different function zones: Further to the high electric conductance, the current bar is characterized by its hardness, and the tulip contact by its excellent tension properties. The advantage: each function is supported by the most suitable material to reliably and constantly meet the different electrical and mechanical requirements. To put it in a nutshell: Instead of either... or, it s even both perfect for the current, and perfect for the force.

159 Connectors in 5.08 pitch Series BL/SL 5.08 Quick selection screw connection OMNIMTE Signal OMNIMTE Signal 5.08 = Wire to board = Wire to wire = Board to wire = Board to board Orientation 270º 180º 135º 90º 90º 270º 180º 225º Solder connection Levels 1 2 Type SL HC SL HC SLD SLD Orientation Flange options Male headers (O)/G/B/F/LF(O)/G/B/F/LF G G age C.188 C.192 C.198 C.199 Clamping yoke BLZ 180 (G)/F/LR C.208 BLZ 90 (G)/F/LR C.210 BLZ 270 (G)/F/LR C.212 Female plug TO BLZ 225 (G)/F/LR C.214 BLT 180 (G)/F/LR C.216 Clamping yoke (twin connector) BLZ Q 180 (G) C.218 BLDZ DN Devicenet 180 (G)/F C.220 BLDT 180 (G) C.224 Female header Solder connection BLL 90 (G)/FI C.236 BLL 180 (G)/B C.238 Female plug and header: (G)* = Closed (without flange) F = Flange with screw LR = Lock & Release lever B = Dovetail for fixing blocks with a nut FI = Inverted flange with nut * not included in the article description

160 Connectors in 5.08 pitch Series BL/SL 5.08 Quick selection screw connection Male header Reflow solder connection Clamping yoke Male plug TO in wall feedthrough Flatblade connection OMNIMTE Signal SLD SLD SLSMT SLSMT SLSMT SLSMarT SLSMarT SLDTHR SLS SLT SLDF C (O)/B (O)/B (O)/G/F/LF (O)/G/F/LF G/LF (O) (O) G/FLF O/G/F/FI O/G/F/FI C.196 C.197 C.166 C.172 C.178 C.182 C.183 C.184 C.202 C.206 C.200 Male header and plug: (O)* = open B = Dovetail for fixing blocks with a nut G = closed F = Screw flange with nut LF = Solder flange with nut FLF = Flange with nut and additional solder flange

161 Connectors in 5.08 pitch Series BL/SL 5.08 Quick selection USH IN spring and crimp connection OMNIMTE Signal OMNIMTE Signal 5.08 = Wire to board = Wire to wire = Board to wire = Board to board Orientation 270º 180º 135º 90º 90º 270º 180º 225º Solder connection Levels 1 2 Type SL HC SL HC SLD SLD Orientation Flange options (O)/G/B/F/LF(O)/G/B/F/LF G G age C.188 C.192 C.198 C.199 USH IN BLF 180 (G)/F/LR C.226 BLF 90 (G)/F/LR C.228 Female plug USH IN (twin connector) BLF 270 (G)/F/LR C.230 BLDF 180 (G)/F/LR C.232 Crimp BLC 180 (G)/B C.234 Female header Solder connection BLL 90 (G)/FI C.236 BLL 180 (G)/B C.238 Female plug and header: (G)* = Closed (without flange) F = Flange with screw LR = Lock & Release lever B = Dovetail for fixing blocks with a nut FI = Inverted flange with nut * not included in the article description

162 Connectors in 5.08 pitch Series BL/SL 5.08 Quick selection USH IN spring and crimp connection Male header Reflow solder connection in wall feedthrough Flatblade connection OMNIMTE Signal SLD SLD SLSMT SLSMT SLSMT SLSMarT SLSMarT SLDTHR SLDF (O)/B (O)/B (O)/G/F/LF (O)/G/F/LF G/LF (O) (O) G/FLF C.196 C.197 C.166 C.172 C.178 C.182 C.183 C.184 C.200 C Male header and plug: (O)* = open B = Dovetail for fixing blocks with a nut G = closed F = Screw flange with nut LF = Solder flange with nut FLF = Flange with nut and additional solder flange

163 Connectors in 5.08 pitch Series BL/SL 5.08 OMNIMTE Signal SLSMT 5.08/../90 Hightemperatureresistant, 90 angled male header, optimised for SMT processing. The male headers can be manually coded or ordered as precoded headers. vailable in open, closed (G), with screw flange (F) or with solder Flange (LF). The solder flange substitutes a screw fastening to the CB and protects the solder joints aganist mechanical stress. vailable with 1.5 or 3.2 solder pins. The short 1.5 pins enable a doublesided CB mounting and reduce the needed amount of solder paste without losing holding force to the CB. acked either in box (BX) or on antistatic roll (tapeonreel, RL). roduct data IEC: 400 / 19 UL: 300 / 15 Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. Diameter of solder eyelet D = Diameter of solder eyelet D = from 9pole on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. SLSMT 5.08/../90 Box ackaged in box L " 8, " D " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II LC GF 0 CuSn tinned 1.2, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BLZ/SL KO OR BLZ/SL KO SW artition element SL T OR SL T SW LED light guide SL FL 1.5/ SL FL 1.5/ SL FL 2,3/ SL FL 2,3/ SL FL 3.8/ SL FL 3.8/ SL FL 9.0/ SL FL 9.0/ Colour black black 5.08 ol. (inch) Qty. Order No. Order No

164 Connectors in 5.08 pitch Series BL/SL 5.08 Tapeonreel SLSMT 5.08/../90G Box ackaged in box SLSMT 5.08/../90G Tape Tapeonreel OMNIMTE Signal " + + 3, " " " C W 8, " " W D ITCH 16 TE FEED DIRECTION ITCH 16 TE FEED DIRECTION Colour black ol. (inch) Qty. Order No Tape widths: 32, 44, 56, 72, Colour black black 5.08 ol. (inch) Qty. Order No. Order No Colour black ol. (inch) Qty. Order No Tape widths: 32, 44, 56, 72, 88

165 Connectors in 5.08 pitch Series BL/SL 5.08 OMNIMTE Signal SLSMT 5.08/../90 Hightemperatureresistant, 90 angled male header, optimised for SMT processing. The male headers can be manually coded or ordered as precoded headers. vailable in open, closed (G), with screw flange (F) or with solder Flange (LF). The solder flange substitutes a screw fastening to the CB and protects the solder joints aganist mechanical stress. vailable with 1.5 or 3.2 solder pins. The short 1.5 pins enable a doublesided CB mounting and reduce the needed amount of solder paste without losing holding force to the CB. acked either in box (BX) or on antistatic roll (tapeonreel, RL). roduct data IEC: 400 / 19 UL: 300 / 15 Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. Diameter of solder eyelet D = Diameter of solder eyelet D = from 9pole on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. SLSMT 5.08/../90F Box ackaged in box +3x +2x 8, " D " " " 2,3+0, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II LC GF 0 CuSn tinned 1.2, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BLZ/SL KO OR BLZ/SL KO SW artition element SL T OR SL T SW LED light guide SL FL 1.5/ SL FL 1.5/ SL FL 2,3/ SL FL 2,3/ SL FL 3.8/ SL FL 3.8/ SL FL 9.0/ SL FL 9.0/ Colour black ol. (inch) Qty. Order No

166 Connectors in 5.08 pitch Series BL/SL 5.08 OMNIMTE Signal SLSMT 5.08/../90 Hightemperatureresistant, 90 angled male header, optimised for SMT processing. The male headers can be manually coded or ordered as precoded headers. vailable in open, closed (G), with screw flange (F) or with solder Flange (LF). The solder flange substitutes a screw fastening to the CB and protects the solder joints aganist mechanical stress. vailable with 1.5 or 3.2 solder pins. The short 1.5 pins enable a doublesided CB mounting and reduce the needed amount of solder paste without losing holding force to the CB. acked either in box (BX) or on antistatic roll (tapeonreel, RL). roduct data IEC: 400 / 19 UL: 300 / 15 Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. SLSMT 5.08/../90LF Box ackaged in box; with solder flange ++9, " +2x D 8, " " " " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II LC GF 0 CuSn tinned 1.2, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BLZ/SL KO OR BLZ/SL KO SW artition element SL T OR SL T SW LED light guide SL FL 1.5/ SL FL 1.5/ SL FL 2,3/ SL FL 2,3/ SL FL 3.8/ SL FL 3.8/ SL FL 9.0/ SL FL 9.0/ Colour black black 5.08 ol. (inch) Qty. Order No. Order No

167 Connectors in 5.08 pitch Series BL/SL 5.08 Tapeonreel; with solder flange " Solder flange (LF) Normally you use a pin header with fastening flanges (F) in combination with a screw from the rear side of the CB to increase the fixation forces of the pin headers. The disadvantages are additional process steps that make the CB mounting complex and cost intensive. The patented solder flange was designed to solve exactly this problem and find a simple and cheap solution. The additional solder pins substitute the present screw flanges and they get soldered together with the pin header. This terminates additional process steps and thus reduces production costs. The additional fixation protects the soldered connections from tensile strain and avoids permanent mechanical stress such as caused by the postfastened screw forces. OMNIMTE Signal C W ITCH 16 TE FEED DIRECTION Colour black ol. (inch) Qty. Order No Tape widths: 32, 44, 56, 72, 88

Connectors in 5.08 pitch Series BL/SL 5.08 OMNIMTE Signal SLSMT 5.08/../180 Hightemperatureresistant, 180 angled male header, optimised for SMT processing.

168 Connectors in 5.08 pitch Series BL/SL 5.08 OMNIMTE Signal SLSMT 5.08/../180 Hightemperatureresistant, 180 angled male header, optimised for SMT processing. The male headers can be manually coded or ordered as precoded headers. vailable in open, closed (G), with screw flange (F) or with solder Flange (LF). The solder flange substitutes a screw fastening to the CB and protects the solder joints aganist mechanical stress. vailable with 1.5 or 3.2 solder pins. The short 1.5 pins enable a doublesided CB mounting and reduce the needed amount of solder paste without losing holding force to the CB. acked either in box (BX) or on antistatic roll (tapeonreel, RL). roduct data IEC: 400 / 19 UL: 300 / 15 Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. Diameter of solder eyelet D = Diameter of solder eyelet D = from 9pole on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. SLSMT 5.08/../180 Box ackaged in box L " D 3, " 8, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II LC GF 0 CuSn tinned 1.2, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BLZ/SL KO OR BLZ/SL KO SW artition element SL T OR SL T SW Colour black black 5.08 ol. (inch) Qty. Order No. Order No

Connectors in 5.08 pitch Series BL/SL 5.08 Tapeonreel SLSMT 5.08/../180G Box ackaged in box SLSMT 5.08/../180G Tape Tapeonreel OMNIMTE Signal 17.5 0.69" + + 3,2 + + 0.126" 8,5 0.335" C W W 12 0.

169 Connectors in 5.08 pitch Series BL/SL 5.08 Tapeonreel SLSMT 5.08/../180G Box ackaged in box SLSMT 5.08/../180G Tape Tapeonreel OMNIMTE Signal " + + 3, " 8, " C W W " " 3, " ITCH 16 D ITCH 16 TE FEED DIRECTION TE FEED DIRECTION Colour black ol. (inch) Qty. Order No Tape widths: 32, 44, 56, 72, Colour black black 5.08 ol. (inch) Qty. Order No. Order No Colour black ol. (inch) Qty. Order No Tape widths: 32, 44, 56, 72, 88

170 Connectors in 5.08 pitch Series BL/SL 5.08 OMNIMTE Signal SLSMT 5.08/../180 Hightemperatureresistant, 180 angled male header, optimised for SMT processing. The male headers can be manually coded or ordered as precoded headers. vailable in open, closed (G), with screw flange (F) or with solder Flange (LF). The solder flange substitutes a screw fastening to the CB and protects the solder joints aganist mechanical stress. vailable with 1.5 or 3.2 solder pins. The short 1.5 pins enable a doublesided CB mounting and reduce the needed amount of solder paste without losing holding force to the CB. acked either in box (BX) or on antistatic roll (tapeonreel, RL). roduct data IEC: 400 / 19 UL: 300 / 15 Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. Diameter of solder eyelet D = Diameter of solder eyelet D = from 9pole on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. SLSMT 5.08/../180F Box ackaged in box L " +2x D " 3, " 8, " 2,3+0, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II LC GF 0 CuSn tinned 1.2, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BLZ/SL KO OR BLZ/SL KO SW artition element SL T OR SL T SW Colour black black 5.08 ol. (inch) Qty. Order No. Order No

171 Connectors in 5.08 pitch Series BL/SL 5.08 OMNIMTE Signal SLSMT 5.08/../180 Hightemperatureresistant, 180 angled male header, optimised for SMT processing. The male headers can be manually coded or ordered as precoded headers. vailable in open, closed (G), with screw flange (F) or with solder Flange (LF). The solder flange substitutes a screw fastening to the CB and protects the solder joints aganist mechanical stress. vailable with 1.5 or 3.2 solder pins. The short 1.5 pins enable a doublesided CB mounting and reduce the needed amount of solder paste without losing holding force to the CB. acked either in box (BX) or on antistatic roll (tapeonreel, RL). roduct data IEC: 400 / 19 UL: 300 / 15 Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. Diameter of solder eyelet D = Diameter of solder eyelet D = from 9pole on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. SLSMT 5.08/../180LF Box ackaged in box; with solder flange ++9, " +2x " D 8, " 3,8 0.15" Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II LC GF 0 CuSn tinned 1.2, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BLZ/SL KO OR BLZ/SL KO SW artition element SL T OR SL T SW Colour black black 5.08 ol. (inch) Qty. Order No. Order No

172 Connectors in 5.08 pitch Series BL/SL 5.08 ackaged in box; with solder flange Solder flange (LF) Normally you use a pin header with fastening flanges (F) in combination with a screw from the rear side of the CB to increase the fixation forces of the pin headers. The disadvantages are additional process steps that make the CB mounting complex and cost intensive. The patented solder flange was designed to solve exactly this problem and find a simple and cheap solution. The additional solder pins substitute the present screw flanges and they get soldered together with the pin header. This terminates additional process steps and thus reduces production costs. The additional fixation protects the soldered connections from tensile strain and avoids permanent mechanical stress such as caused by the postfastened screw forces. OMNIMTE Signal C W " ITCH 16 TE FEED DIRECTION Colour black ol. (inch) Qty. Order No Tape widths: 32, 44, 56, 72, 88

173 Connectors in 5.08 pitch Series BL/SL 5.08 OMNIMTE Signal SLSMT 5.08/../270 Hightemperatureresistant, 270 angled male header, optimised for SMT processing. The male headers can be manually coded or ordered as precoded headers. vailable in open, closed (G), with screw flange (F) or with solder Flange (LF). The solder flange substitutes a screw fastening to the CB and protects the solder joints aganist mechanical stress. vailable with 1.5 or 3.2 solder pins. The short 1.5 pins enable a doublesided CB mounting and reduce the needed amount of solder paste without losing holding force to the CB. acked either in box (BX) or on antistatic roll (tapeonreel, RL). roduct data IEC: 400 / 19 UL: 300 / 15 Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. SLSMT 5.08/../270GL Box ackaged in box " D " " " " " " CB cut out Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II LC GF 0 CuSn tinned 1.2, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BLZ/SL KO OR BLZ/SL KO SW artition element SL T OR SL T SW Colour black black 5.08 ol. (inch) Qty. Order No. Order No

174 Connectors in 5.08 pitch Series BL/SL 5.08 Tapeonreel SLSMT 5.08/../270GH Box ackaged in box SLSMT 5.08/../270GH Tape Tapeonreel OMNIMTE Signal " " " " C W " D " W ITCH 16 ITCH 16 TE FEED DIRECTION TE FEED DIRECTION Colour black ol. (inch) Qty. Order No Colour black black 5.08 ol. (inch) Qty. Order No. Order No Colour black ol. (inch) Qty. Order No Tape widths: 32, 44, 56, 72, 88 Tape widths: 32, 44, 56, 72, 88

Connectors in 5.08 pitch Series BL/SL 5.08 OMNIMTE Signal SLSMT 5.08/../270 Hightemperatureresistant, 270 angled male header, optimised for SMT processing.

175 Connectors in 5.08 pitch Series BL/SL 5.08 OMNIMTE Signal SLSMT 5.08/../270 Hightemperatureresistant, 270 angled male header, optimised for SMT processing. The male headers can be manually coded or ordered as precoded headers. vailable in open, closed (G), with screw flange (F) or with solder Flange (LF). The solder flange substitutes a screw fastening to the CB and protects the solder joints aganist mechanical stress. vailable with 1.5 or 3.2 solder pins. The short 1.5 pins enable a doublesided CB mounting and reduce the needed amount of solder paste without losing holding force to the CB. acked either in box (BX) or on antistatic roll (tapeonreel, RL). roduct data IEC: 400 / 19 UL: 300 / 15 Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. SLSMT 5.08/../270FL Box ackaged in box; with solder flange " " +2x D " " " " " " CB cut out Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II LC GF 0 CuSn tinned 1.2, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BLZ/SL KO OR BLZ/SL KO SW artition element SL T OR SL T SW Colour black black 5.08 ol. (inch) Qty. Order No. Order No

176 Connectors in 5.08 pitch Series BL/SL 5.08 Tapeonreel; with solder flange SLSMT 5.08/../270FH Box ackaged in box; with solder flange SLSMT 5.08/../270FH Tape Tapeonreel; with solder flange OMNIMTE Signal " + 3 x " " C " W + 2 x D " W " ITCH 16 ITCH 16 TE FEED DIRECTION TE FEED DIRECTION Colour black ol. (inch) Qty. Order No Colour black black 5.08 ol. (inch) Qty. Order No. Order No Colour black ol. (inch) Qty. Order No Tape widths: 32, 44, 56, 72, 88 Tape widths: 32, 44, 56, 72, 88

Connectors in 5.08 pitch Series BL/SL 5.08 OMNIMTE Signal SLSMarT 5.0x/../90 & 180 Hightemperatureresistant, modular male header, optimised for SMT processing.

177 Connectors in 5.08 pitch Series BL/SL 5.08 OMNIMTE Signal SLSMarT 5.0x/../90 & 180 Hightemperatureresistant, modular male header, optimised for SMT processing. You can put together any size by using the 2pole and 3pole male header modules. Used with ick & lace machines for faster processing speeds Less article numbers SLSMarT covers both 5.00 and 5.08 pitches Efficient use of feeder bank: only two reel feeder positions are required on the feeder bank. Highpole male headers can also be processed with ick & lace machines No ick & lace pads required thus no need for tedious pad removal after soldering acked in tapeonreel. roduct data IEC: 400 / 16.5 UL: 300 / 15 Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. SLSMarT 5.0x/../90 Tape Tapeonreel L " 8, " 1,5+0, " 9, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II LC GF 0 CuSn tinned 1.2, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BLZ/SL KO OR BLZ/SL KO SW artition element SL T OR SL T SW LED light guide SL FL 1.5/ SL FL 1.5/ SL FL 2,3/ SL FL 2,3/ SL FL 3.8/ SL FL 3.8/ SL FL 9.0/ SL FL 9.0/ Colour 5.0x 1.5 black ol. (inch) Qty. Order No Tape widths: 32 May be used for 5.00 and 5.08 pitches

Connectors in 5.08 pitch Series BL/SL 5.08 Tapeonreel L 1 + 8,3 0.327" 12 0.472" 3,815 0.15" 1,5+0,1 0.

The aim was to satisfy the numerous demands of automatic CB assembly.

178 Connectors in 5.08 pitch Series BL/SL 5.08 Tapeonreel L 1 + 8, " " 3, " 1,5+0, " SLSMarT The SLSMarT System was developed in order to bring even further improvements to the benefits of conventional SMT/THR components. The aim was to satisfy the numerous demands of automatic CB assembly. The result is a male connector with the following features: minimum weight compact form processing in automatic CB assembly machines maximum assembly speed standardised automatic packing spacesaving feeding in automatic machines (feeder as narrow as possible) no pick&place pad required utomatic CB assembly machines operate most costeffectively when they run at maximum speed. This is not possible with heavy components. The solution is to use 2 and 3pole male connector modules to interconnect components of any size. Therefore, by assembling the SLSMarT modules in one row, 23 standard male connectors (2 to 24pole) can already be created. The optimum tolerance design of the SLSMarT modules enables the use at pitches of 5.00 (0.197 inch) and 5.08 (0.200 inch). The small pitch deviation is compensated for by the spacing to the next module. OMNIMTE Signal C Colour 5.0x 1.5 black ol. (inch) Qty. Order No The trick is that by using the appropriate hole layout, the number of standard male connectors replaced increases from 23 to 46 variations. nd the fact that two plugin directions are available, 90 and 180, means that the result is increased to 92 variations. The optimum use of the feeder bank is possible thanks to the need for only four belt conveyor systems with a belt width of 32 each. Tape widths: 32 May be used for 5.00 and 5.08 pitches

Connectors in 5.08 pitch Series BL/SL 5.08 OMNIMTE Signal SLDTHR 5.08/../180 Doublelevel, hightemperatureresistant male header, optimised for SMT processing.

179 Connectors in 5.08 pitch Series BL/SL 5.08 OMNIMTE Signal SLDTHR 5.08/../180 Doublelevel, hightemperatureresistant male header, optimised for SMT processing. The connection levels are offset and designed for a female plug with screw connection or USH IN wire connect. The male headers can be manually coded or ordered as precoded headers. vailable with screw flange (F) or screw & solder flange (FLF). The solder flange makes an additional screwfixation to the CB unnecessary and protects the solder joints against mechanical stress. vailable with 1.5 or 3.2 solder pins. The FLF version is featured with a soldering flange and an additional screwfastening possibility to the CB. roduct data IEC: 400 / 15 UL: 300 / 10 Note: dditional colours on request related to rated crosssection and min. No. of poles. Spacing between rows: see hole layout on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. SLDTHR 5.08/../180F ackaged in box D + 3 x 3 x + 8,43 3 x " 26, " + 2 x /2 8, " 3 x 4, " " Ø 2,8 0.11" Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II LC GF 0 CuSn tinned 1.2, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BLZ/SL KO OR BLZ/SL KO SW artition element SL T OR SL T SW Colour black black 5.08 ol. (inch) Qty. Order No. Order No

Connectors in 5.08 pitch Series BL/SL 5.08 ackaged in box; with solder flange + 3 3 x + 8,43 3 x + 0.

180 Connectors in 5.08 pitch Series BL/SL 5.08 ackaged in box; with solder flange x + 8,43 3 x " SLDTHR 180GLF The spacesaving SLDTHR double level male connector complements the reflowcompatible products from Weidmüller. Hightemperatureresistant plastics enable the product to be integrated into the reflow soldering process. This range offers additional fixing to the CB to resist greater mechanical loads. The SLDTHR GLF incorporates an additional fixing without screws to relieve the mechanical loads on the contact pins. To do this, there are solder pins in optimum positions which do not have an electrical function. OMNIMTE Signal C " 26, " D + 2x /2 8, " 6, " 4, " 3 x Ø 2,8 0.11" Colour black black 5.08 ol. (inch) Qty. Order No. Order No

The male headers can be manually coded or ordered as precoded headers. roduct data IEC: 320 / 18 UL: 300 / 10 Note: dditional colours on request related to rated crosssection and min. No. of poles.

181 Connectors in 5.08 pitch Series BL/SL 5.08 OMNIMTE Signal SLHTHR 5.08/../180 High temperatureresistant male header, optimised for SMT processing. Makes a compact 3row male header when used together with the SLDTHR. The connection levels are offset and designed for a female plug with screw connection or USH IN wire connect. The male headers can be manually coded or ordered as precoded headers. roduct data IEC: 320 / 18 UL: 300 / 10 Note: dditional colours on request related to rated crosssection and min. No. of poles. Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. SLHTHR 5.08/../180F " " " " " " Ø 1.5 Ø " " Ø " " " " " " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II LC GF 0 CuSn tinned 1.2, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BLZ/SL KO OR BLZ/SL KO SW artition element SL T OR SL T SW Colour black ol. (inch) Qty. Order No

182 Connectors in 5.08 pitch Series BL/SL 5.08 OMNIMTE Signal SL 5.08HC/../90 Male headers made from glassfibrereinforced plastic with 90 wire outlet; optimised for wave soldering, absolut dimension stable. The male headers can be manually coded or ordered as precoded headers. vailable in open, closed (G), with screw flange (F) or with solder Flange (LF). The solder flange makes an additional screwfixation to the CB unnecessary and protects the solder joints against mechanical stress. roduct data IEC: 400 / 20.5 UL: 300 / 15 Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. SL 5.08HC/../90 + 3,8 0.15" 8, " " D " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II GF 0 Copper alloy tinned 1.2, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BLZ/SL KO OR BLZ/SL KO SW artition element SL T OR SL T SW LED light guide SL FL 1.5/ SL FL 1.5/ SL FL 2,3/ SL FL 2,3/ SL FL 3.8/ SL FL 3.8/ SL FL 9.0/ SL FL 9.0/ Mounting block SL BB11R OR SL BB11R SW Colour orange black 5.08 ol. (inch) Qty. Order No. Order No

183 Connectors in 5.08 pitch Series BL/SL 5.08 SL 5.08HC/../90B OMNIMTE Signal + + 3, " 3,8 0.15" 8, " " + 6, " 3,8 0.15" 3,2 0.13" " 8, " C D " D " Colour orange black 5.08 ol. (inch) Qty. Order No. Order No Colour orange black 5.08 ol. (inch) Qty. Order No. Order No

184 Connectors in 5.08 pitch Series BL/SL 5.08 OMNIMTE Signal SL 5.08HC/../90 Male headers made from glassfibrereinforced plastic with 90 wire outlet; optimised for wave soldering, absolut dimension stable. The male headers can be manually coded or ordered as precoded headers. vailable in open, closed (G), with screw flange (F) or with solder Flange (LF). The solder flange makes an additional screwfixation to the CB unnecessary and protects the solder joints against mechanical stress. roduct data IEC: 400 / 20.5 UL: 300 / 15 Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. SL 5.08HC/../90F + 3 x 3,8 0.15" 8, " " + 2 x 10 D 0.394" " Ø 2,3 + 0,1 Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II GF 0 Copper alloy tinned 1.2, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BLZ/SL KO OR BLZ/SL KO SW artition element SL T OR SL T SW LED light guide SL FL 1.5/ SL FL 1.5/ SL FL 2,3/ SL FL 2,3/ SL FL 3.8/ SL FL 3.8/ SL FL 9.0/ SL FL 9.0/ Colour orange black 5.08 ol. (inch) Qty. Order No. Order No

Connectors in 5.08 pitch Series BL/SL 5.08 with solder flange + + 9,8 12 0.

185 Connectors in 5.08 pitch Series BL/SL 5.08 with solder flange + + 9, " Solder flange (LF) Normally you use a pin header with fastening flanges (F) in combination with a screw from the rear side of the CB to increase the fixation forces of the pin headers. The disadvantages are additional process steps that make the CB mounting complex and cost intensive. The patented solder flange was designed to solve exactly this problem and find a simple and cheap solution. The additional solder pins substitute the present screw flanges and they get soldered together with the pin header. This terminates additional process steps and thus reduces production costs. The additional fixation protects the soldered connections from tensile strain and avoids permanent mechanical stress such as caused by the postfastened screw forces. OMNIMTE Signal C 3,8 0.15" 8, " + 2 x D " " Colour orange black 5.08 ol. (inch) Qty. Order No. Order No

186 Connectors in 5.08 pitch Series BL/SL 5.08 OMNIMTE Signal SL 5.08HC/../180 Male headers made from glassfibrereinforced plastic with 180 wire outlet; optimised for wave soldering, absolut dimension stable. The male headers can be manually coded or ordered as precoded headers. vailable in open, closed (G), with screw flange (F) or with solder Flange (LF). The solder flange makes an additional screwfixation to the CB unnecessary and protects the solder joints against mechanical stress. roduct data IEC: 400 / 20.5 UL: 300 / 15 Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. SL 5.08HC/../ " 8, " 3, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II GF 0 Copper alloy tinned 1.2, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BLZ/SL KO OR BLZ/SL KO SW artition element SL T OR SL T SW Mounting block SL BB11R OR SL BB11R SW Colour orange black 5.08 ol. (inch) Qty. Order No. Order No

187 Connectors in 5.08 pitch Series BL/SL 5.08 SL 5.08HC/../180B OMNIMTE Signal + + 3, " 8, " + 6, " 8, " C " " D 3, " D 3,8 0.15" Colour orange black 5.08 ol. (inch) Qty. Order No. Order No Colour orange black 5.08 ol. (inch) Qty. Order No. Order No

188 Connectors in 5.08 pitch Series BL/SL 5.08 OMNIMTE Signal SL 5.08HC/../180 Male headers made from glassfibrereinforced plastic with 180 wire outlet; optimised for wave soldering, absolut dimension stable. The male headers can be manually coded or ordered as precoded headers. vailable in open, closed (G), with screw flange (F) or with solder Flange (LF). The solder flange makes an additional screwfixation to the CB unnecessary and protects the solder joints against mechanical stress. roduct data IEC: 400 / 20.5 UL: 300 / 15 Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. SL 5.08HC/../180F " " 8, " + 2 x D 3, " Ø 2,3+0, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II GF 0 Copper alloy tinned 1.2, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BLZ/SL KO OR BLZ/SL KO SW artition element SL T OR SL T SW Colour orange black 5.08 ol. (inch) Qty. Order No. Order No

Connectors in 5.08 pitch Series BL/SL 5.08 with solder flange + + 9,8 8,5 0.

189 Connectors in 5.08 pitch Series BL/SL 5.08 with solder flange + + 9,8 8, " Solder flange (LF) Normally you use a pin header with fastening flanges (F) in combination with a screw from the rear side of the CB to increase the fixation forces of the pin headers. The disadvantages are additional process steps that make the CB mounting complex and cost intensive. The patented solder flange was designed to solve exactly this problem and find a simple and cheap solution. The additional solder pins substitute the present screw flanges and they get soldered together with the pin header. This terminates additional process steps and thus reduces production costs. The additional fixation protects the soldered connections from tensile strain and avoids permanent mechanical stress such as caused by the postfastened screw forces. C " OMNIMTE Signal + 2 x D 3,8 0.15" Colour orange black 5.08 ol. (inch) Qty. Order No. Order No

190 Connectors in 5.08 pitch Series BL/SL 5.08 OMNIMTE Signal SLD 5.08/../90 & 180 Doublelevel male header optimised for wave soldering. The connection levels are offset and designed for a female plug with screw or USH IN wire connect. ll male headers can be manually coded or ordered as precoded headers. roduct data IEC: 400 / 17 UL: 300 / 10 Note: dditional colours on request related to rated crosssection and min. No. of poles. Spacing between rows: see hole layout on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. SLD 5.08/90 L 1 + /2 22, " 26, " /2 1,3+0, " " 10, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II BT 0 CuSn tinned 1.2, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Mounting block Order No. SL BB14 OR SL BB14 SW Coding BLZ/SL KO OR BLZ/SL KO SW artition element SL T OR SL T SW Colour orange ol. (inch) Qty. Order No

Connectors in 5.08 pitch Series BL/SL 5.08 L 1 + /2 26,2 1.032" C 22,2 0.872" /2 1,3+0,1 0.051" 4,6 0.182" 15,24 0.600" OMNIMTE Signal Colour 5.08 3.2 orange ol. (inch) Qty. Order No. 4 5.08 0.

191 Connectors in 5.08 pitch Series BL/SL 5.08 L 1 + /2 26, " C 22, " /2 1,3+0, " 4, " 15, " OMNIMTE Signal Colour orange ol. (inch) Qty. Order No

192 Connectors in 5.08 pitch Series BL/SL 5.08 OMNIMTE Signal SLD 5.08/../90 & 180 Doublelevel male header optimised for wave soldering. The connections are at the same level with access that is flush over the front board. The male headers can be manually coded or ordered as precoded headers. roduct data IEC: 400 / 11 UL: 300 / 10 Note: dditional colours on request related to rated crosssection and min. No. of poles. Spacing between rows: see hole layout on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. SLD 5.08/../90G ++1, " " 28, " 1,3+0, " 9, " " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II BT 0 CuSn tinned 1.2, Octagonal ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BLZ/SL KO OR BLZ/SL KO SW artition element SL T OR SL T SW Colour orange ol. (inch) Qty. Order No

193 Connectors in 5.08 pitch Series BL/SL , , " C " 1,3+0, " 3, " 20, OMNIMTE Signal Colour orange ol. (inch) Qty. Order No

Connectors in 5.08 pitch Series BL/SL 5.08 OMNIMTE Signal SLDF 5.08 L/F.. Feedthrough male connector with optional locking function, for mounting on front plate.

roduct data IEC: 400 / 15 UL: 300 / 10 Note: dditional colours on request related to rated crosssection and min. No. of poles. Solder connection for solid and flexible wires up to 2.

194 Connectors in 5.08 pitch Series BL/SL 5.08 OMNIMTE Signal SLDF 5.08 L/F.. Feedthrough male connector with optional locking function, for mounting on front plate. Internal connection as flatblade or solder connection. ll male headers can be manually coded or ordered as precoded headers. roduct data IEC: 400 / 15 UL: 300 / 10 Note: dditional colours on request related to rated crosssection and min. No. of poles. Solder connection for solid and flexible wires up to with insulating/shrinkwrap sleeve, or with 2.8 flat blade receptacles with insulated sleeves to DIN IEC 760 on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. SLDF 5.08 L/F , " Ø " 17, " 2, " " + 3 x 0, " Ø3, " " " " + + 3, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II BT 0 CuSn tinned ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BLZ/SL KO OR BLZ/SL KO SW artition element SL T OR SL T SW Interlock SLDF R Colour 5.08 orange ol. (inch) Qty. Order No

195 Connectors in 5.08 pitch Series BL/SL 5.08 OMNIMTE Signal SLS 5.08/../180 Male plug with clampingyoke screw connection and straight wire outlet. The male plug provides space for labelling and can be coded. roduct data IEC: 400 / 21.5 / ² UL: 300 / 15 / WG Note: dditional colours on request related to rated crosssection and min. No. of poles. Wire end ferrule without plastic collar to DIN 46228/1 Wire end ferrule with plastic collar to DIN 46228/4 on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. SLS 5.08/../180B SLS 5.08 F & BLZ 5.08 F for wiretowire applications. SLS 5.08 FI & BLL 5.08 FI for boardtowire connections. Folded steel clamping yoke accoodates the connected wire and compensates for temperature fluctuations vailable in standard, with flange receptacle (F) or with screw flange (FI) " 22, " 15, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II BT 0 CuSn tinned ccessories Note: Refer to the ccessories chapter for additional accessories. Strain relief Order No. BLZ 5.08 ZE4 OR BLZ 5.08 ZE4 SW BLZ 5.08 ZE8 OR BLZ 5.08 ZE8 SW Coding BLZ/SL KO OR BLZ/SL KO SW Screwdriver SD 0,6x3,5x SDI 0,6x3,5x artition element SL T OR SL T SW Mounting block SL BB11R OR SL BB11R SW Colour 5.08 orange ol. (inch) Qty. Order No Representative derating curve

196 Connectors in 5.08 pitch Series BL/SL 5.08 SLS 5.08/../180FI OMNIMTE Signal C + 3x 22, " " 22, " 15, " 15, " Colour 5.08 orange ol. (inch) Qty. Order No Colour 5.08 orange ol. (inch) Qty. Order No dditional derating curves

Connectors in 5.08 pitch Series BL/SL 5.08 OMNIMTE Signal SLS 5.08/../180TB RF15 Male plug with clampingyoke screw connection and straight wire outlet.

08 F for wiretowire applications (flying lead assemblies) Folded steel clamping yoke accoodates the connected wire and compensates for temperature fluctuations roduct data IEC: 400 / 21.5 / 0.2 2.

197 Connectors in 5.08 pitch Series BL/SL 5.08 OMNIMTE Signal SLS 5.08/../180TB RF15 Male plug with clampingyoke screw connection and straight wire outlet. The male plug provides space for labelling and can be coded. The clipon foot makes it easy to attach to the DIN rail (TS15). SLS 5.08 F & BLZ 5.08 F for wiretowire applications (flying lead assemblies) Folded steel clamping yoke accoodates the connected wire and compensates for temperature fluctuations roduct data IEC: 400 / 21.5 / ² UL: 300 / 15 / WG Note: dditional colours on request related to rated crosssection and min. No. of poles. Wire end ferrule without plastic collar to DIN 46228/1 Wire end ferrule with plastic collar to DIN 46228/4 on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. SLS 5.08/../180TB RF15 L , " " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance x 3.5 DIN C 40 C III III II BT 0 CuSn tinned ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BLZ/SL KO OR BLZ/SL KO SW Screwdriver SD 0,6x3,5x SDI 0,6x3,5x artition element SL T OR SL T SW Mounting block SL BB4 OR SL BB8 RH OR Colour 5.08 orange ol. (inch) Qty. Order No Representative derating curve

Connectors in 5.08 pitch Series BL/SL 5.08 Male plug with clampingyoke screw connection and straight wire outlet. The male plug provides space for labelling and can be coded.

198 Connectors in 5.08 pitch Series BL/SL 5.08 Male plug with clampingyoke screw connection and straight wire outlet. The male plug provides space for labelling and can be coded. The clipon foot makes it easy to attach to the DIN rail (TS32 / TS35). SLS 5.08 F & BLZ 5.08 F for wiretowire applications (flying lead assemblies) Folded steel clamping yoke accoodates the connected wire and compensates for temperature fluctuations roduct data IEC: 400 / 21.5 / ² UL: 300 / 15 / WG Note: dditional colours on request related to rated crosssection and min. No. of poles. Wire end ferrule without plastic collar to DIN 46228/1 Wire end ferrule with plastic collar to DIN 46228/4 on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. SLS 5.08/../180TB KF35 L , " OMNIMTE Signal C 42, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance x 3.5 DIN C 40 C III III II BT 0 CuSn tinned ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BLZ/SL KO OR BLZ/SL KO SW Screwdriver SD 0,6x3,5x SDI 0,6x3,5x artition element SL T OR SL T SW Mounting block SL BB4 OR SL BB8 RH OR Colour 5.08 orange ol. (inch) Qty. Order No Representative derating curve

Connectors in 5.08 pitch Series BL/SL 5.08 OMNIMTE Signal SLT 5.08/../180B Male plug with TO screw connection, with straight wire outlet. The male plug provides space for labelling and can be coded.

199 Connectors in 5.08 pitch Series BL/SL 5.08 OMNIMTE Signal SLT 5.08/../180B Male plug with TO screw connection, with straight wire outlet. The male plug provides space for labelling and can be coded. SLT 5.08 & BLT 5.08 for wiretowire applications (flying lead assemblies) SLT 5.08 & BLL 5.08 for boardtoboard connections (e.g., power supply for actuators) The specialist for cramped installations The extra flat shape allows for dense component assembly. The screw connect and the cable entry are located on the same side of the connector. roduct data IEC: 400 / 16 / ² UL: 300 / 10 / WG Note: dditional colours on request related to rated crosssection and min. No. of poles. Wire end ferrule without plastic collar to DIN 46228/1 Wire end ferrule with plastic collar to DIN 46228/4 Crimp form for wire end ferrules with Z 6/5 crimping tool are recoended for the largest cable sizes. on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. SLT 5.08/../180B " 12,2 0.48" 34, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance x 3.5 DIN C 40 C III III II BT 0 CuSn tinned ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BLZ/SL KO OR BLZ/SL KO SW Screwdriver SD 0,6x3,5x SDI 0,6x3,5x artition element SL T OR SL T SW Mounting block SL BB11R OR SL BB11R SW Colour 5.08 orange ol. (inch) Qty. Order No Representative derating curve

200 Connectors in 5.08 pitch Series BL/SL 5.08 OMNIMTE Signal BLZ 5.08/../180 The BLZ is the functional extension of the BLZ series. The in the part name stands for a plus in security and performance in processing and use. WIRE REDY delivered with terminal points already opened ower tools can be used with the globally compatible plus/minus screw head Folded steel clamping yoke accoodates the connected wire and compensates for temperature fluctuations The integrated wire guard prevents dangerous underinsertion of the wire from occurring. Lock and releaselever: toolless locking and gentle releasing of the connector reduces the mechanical stress on the solder joints. roduct data IEC: 400 / 19 / ² UL: 300 / 10 / WG Note: dditional colours on request related to rated crosssection and min. No. of poles. Wire end ferrule without plastic collar to DIN 46228/1 Wire end ferrule with plastic collar to DIN 46228/4 on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. BLZ 5.08/../ " 20, " 11, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance x 3.5 DIN C 40 C 4 III III II BT 0 Copper alloy tinned ccessories Note: Refer to the ccessories chapter for additional accessories. Strain relief Order No. BLZ 5.08 ZE4 OR BLZ 5.08 ZE4 SW BLZ 5.08 ZE8 OR BLZ 5.08 ZE8 SW Coding BLZ/SL KO OR BLZ/SL KO SW Screwdriver SD 0,6x3,5x SDI 0,6x3,5x Crosshead screwdriver SDK H SDK Z Colour orange black 5.08 ol. (inch) Qty. Order No. Order No Representative derating curve

201 Connectors in 5.08 pitch Series BL/SL , " + 20, " BLZ 5.08/../180LR with release latch + + 9, " 20, " The 2in1 contact Every pluggable connector covers two contact points and thus must meet two different requirements: First, the wire termination and second, the connection between plug and pin header. Referring to the 5.0x pitch series, Weidmüller offers different wire connection technologies, but one platform contact for the male / female connection since years. This welldesigned hybride platform contact ensures a constant quality on a very high level. Hybride means, that we combine metal material featuring different characteristics by welding, in order to devide the contact system into different function zones: Further to the high electric conductance, the current bar is characterized by its hardness, and the tulip contact by its excellent tension properties. The advantage: each function is supported by the most suitable material to reliably and constantly meet the different electrical and mechanical requirements. To put it in a nutshell: Instead of either... or, it s even both perfect for the current, and perfect for the force. C " " " OMNIMTE Signal 11, " 11, " Colour orange black 5.08 ol. (inch) Qty. Order No. Order No Colour orange black 5.08 ol. (inch) Qty. Order No. Order No dditional derating curves

202 Connectors in 5.08 pitch Series BL/SL 5.08 OMNIMTE Signal BLZ 5.08/../90 The BLZ is the functional extension of the BLZ series. The in the part name stands for a plus in security and performance in processing and use. WIRE REDY delivered with terminal points already opened ower tools can be used with the globally compatible plus/minus screw head Folded steel clamping yoke accoodates the connected wire and compensates for temperature fluctuations The integrated wire guard prevents dangerous underinsertion of the wire from occurring. Lock and releaselever: toolless locking and gentle releasing of the connector reduces the mechanical stress one the solder joints. roduct data IEC: 400 / 15.5 / ² UL: 300 / 10 / WG Note: dditional colours on request related to rated crosssection and min. No. of poles. Wire end ferrule without plastic collar to DIN 46228/1 Wire end ferrule with plastic collar to DIN 46228/4 on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. BLZ 5.08/../ , " 14, " 18, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance x 3.5 DIN C 40 C 4 III III II BT 0 Copper alloy tinned ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BLZ/SL KO OR BLZ/SL KO SW Screwdriver SD 0,6x3,5x SDI 0,6x3,5x Crosshead screwdriver SDK H SDK Z Colour orange black 5.08 ol. (inch) Qty. Order No. Order No Representative derating curve

Connectors in 5.08 pitch Series BL/SL 5.08 + + 9,8 + + 0.386" 14,1 0.555" 27,2 1.071" 18,9 0.742" BLZ 5.08/../90LR with release latch + + 9,8 + + 0.386" 18,9 0.742" 21,4 0.844" 27,2 1.

203 Connectors in 5.08 pitch Series BL/SL , " 14, " 27, " 18, " BLZ 5.08/../90LR with release latch + + 9, " 18, " 21, " 27, " The 2in1 contact Every pluggable connector covers two contact points and thus must meet two different requirements: First, the wire termination and second, the connection between plug and pin header. Referring to the 5.0x pitch series, Weidmüller offers different wire connection technologies, but one platform contact for the male / female connection since years. This welldesigned hybride platform contact ensures a constant quality on a very high level. Hybride means, that we combine metal material featuring different characteristics by welding, in order to devide the contact system into different function zones: Further to the high electric conductance, the current bar is characterized by its hardness, and the tulip contact by its excellent tension properties. The advantage: each function is supported by the most suitable material to reliably and constantly meet the different electrical and mechanical requirements. To put it in a nutshell: Instead of either... or, it s even both perfect for the current, and perfect for the force. OMNIMTE Signal C + 14, " Colour orange black 5.08 ol. (inch) Qty. Order No. Order No Colour orange black 5.08 ol. (inch) Qty. Order No. Order No

204 Connectors in 5.08 pitch Series BL/SL 5.08 OMNIMTE Signal BLZ 5.08/../270 The BLZ is the functional extension of the BLZ series. The in the part name stands for a plus in security and performance in processing and use. WIRE REDY delivered with terminal points already opened ower tools can be used with the globally compatible plus/minus screw head Folded steel clamping yoke accoodates the connected wire and compensates for temperature fluctuations The integrated wire guard prevents dangerous underinsertion of the wire from occurring. Lock and releaselever: toolless locking and gentle releasing of the connector reduces the mechanical stress one the solder joints. roduct data IEC: 400 / 15.5 / ² UL: 300 / 10 / WG Note: dditional colours on request related to rated crosssection and min. No. of poles. Wire end ferrule without plastic collar to DIN 46228/1 Wire end ferrule with plastic collar to DIN 46228/4 on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. BLZ 5.08/../ , " 14, " 18, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance x 3.5 DIN C 40 C 4 III III II BT 0 Copper alloy tinned ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BLZ/SL KO OR BLZ/SL KO SW Screwdriver SD 0,6x3,5x SDI 0,6x3,5x Crosshead screwdriver SDK H SDK Z Colour orange black 5.08 ol. (inch) Qty. Order No. Order No Representative derating curve

205 Connectors in 5.08 pitch Series BL/SL , " 27, " 14, " 18, " BLZ 5.08/../270LR with release latch + + 9, " 27, " 21, " 18, " The 2in1 contact Every pluggable connector covers two contact points and thus must meet two different requirements: First, the wire termination and second, the connection between plug and pin header. Referring to the 5.0x pitch series, Weidmüller offers different wire connection technologies, but one platform contact for the male / female connection since years. This welldesigned hybride platform contact ensures a constant quality on a very high level. Hybride means, that we combine metal material featuring different characteristics by welding, in order to devide the contact system into different function zones: Further to the high electric conductance, the current bar is characterized by its hardness, and the tulip contact by its excellent tension properties. The advantage: each function is supported by the most suitable material to reliably and constantly meet the different electrical and mechanical requirements. To put it in a nutshell: Instead of either... or, it s even both perfect for the current, and perfect for the force. OMNIMTE Signal C 14, " Colour orange black 5.08 ol. (inch) Qty. Order No. Order No Colour orange black 5.08 ol. (inch) Qty. Order No. Order No

206 Connectors in 5.08 pitch Series BL/SL 5.08 OMNIMTE Signal BLZ 5.08/../225 The BLZ is the functional extension of the BLZ series. The in the part name stands for a plus in security and performance in processing and use. WIRE REDY delivered with terminal points already opened ower tools can be used with the globally compatible plus/minus screw head Folded steel clamping yoke accoodates the connected wire and compensates for temperature fluctuations The integrated wire guard prevents dangerous underinsertion of the wire from occurring. Lock and releaselever: toolless locking and gentle releasing of the connector reduces the mechanical stress one the solder joints. roduct data IEC: 400 / 17.5 / ² UL: 300 / 10 / WG Note: dditional colours on request related to rated crosssection and min. No. of poles. Wire end ferrule without plastic collar to DIN 46228/1 Wire end ferrule with plastic collar to DIN 46228/4 on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. BLZ 5.08/../ , " 15, " 15, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance x 3.5 DIN C 40 C 4 III III II BT 0 Copper alloy tinned ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BLZ/SL KO OR BLZ/SL KO SW Screwdriver SD 0,6x3,5x SDI 0,6x3,5x Crosshead screwdriver SDK H SDK Z Colour orange black 5.08 ol. (inch) Qty. Order No. Order No Representative derating curve

207 Connectors in 5.08 pitch Series BL/SL " 23, " The 2in1 contact Every pluggable connector covers two contact points and thus must meet two different requirements: First, the wire termination and second, the connection between plug and pin header. Referring to the 5.0x pitch series, Weidmüller offers different wire connection technologies, but one platform contact for the male / female connection since years. This welldesigned hybride platform contact ensures a constant quality on a very high level. Hybride means, that we combine metal material featuring different characteristics by welding, in order to devide the contact system into different function zones: Further to the high electric conductance, the current bar is characterized by its hardness, and the tulip contact by its excellent tension properties. The advantage: each function is supported by the most suitable material to reliably and constantly meet the different electrical and mechanical requirements. To put it in a nutshell: Instead of either... or, it s even both perfect for the current, and perfect for the force. OMNIMTE Signal C 15, " 15, " Colour orange black 5.08 ol. (inch) Qty. Order No. Order No

Connectors in 5.08 pitch Series BL/SL 5.08 OMNIMTE Signal BLT 5.08/../180 The BLT is currently the most compact TO connection of its type available in 5.08 pitch. The BLT s pull effect ensures that the connected wire is pulled in to the clamping point.

208 Connectors in 5.08 pitch Series BL/SL 5.08 OMNIMTE Signal BLT 5.08/../180 The BLT is currently the most compact TO connection of its type available in 5.08 pitch. The BLT s pull effect ensures that the connected wire is pulled in to the clamping point. The extra flat shape allows for dense component assembly. The specialist for cramped installations The screw connect and the cable entry are located on the same side of the connector. Lock and releaselever: toolless locking and gentle releasing of the connector reduces the mechanical stress one the solder joints. roduct data IEC: 400 / 17 / ² UL: 300 / 10 / WG Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. Wire end ferrule without plastic collar to DIN 46228/1 Wire end ferrule with plastic collar to DIN 46228/4 Crimp form for wire end ferrules with Z 6/5 crimping tool are recoended for the largest cable sizes. on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. BLT 5.08/../180 + L 1 12, " 31, " 23, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance x 3.5 DIN C 40 C 2.5 III III II BT 0 CuSn tinned ccessories Note: Refer to the ccessories chapter for additional accessories. Strain relief Order No. BLT ZE4 OR BLT ZE8 OR Coding BLZ/SL KO OR BLZ/SL KO SW Screwdriver SD 0,6x3,5x SDI 0,6x3,5x Colour orange black 5.08 ol. (inch) Qty. Order No. Order No Representative derating curve

209 Connectors in 5.08 pitch Series BL/SL , " 31, " BLT 5.08/../180LR with release bar + 9, " 31, " The 2in1 contact Every pluggable connector covers two contact points and thus must meet two different requirements: First, the wire termination and second, the connection between plug and pin header. Referring to the 5.0x pitch series, Weidmüller offers different wire connection technologies, but one platform contact for the male / female connection since years. This welldesigned hybride platform contact ensures a constant quality on a very high level. Hybride means, that we combine metal material featuring different characteristics by welding, in order to devide the contact system into different function zones: Further to the high electric conductance, the current bar is characterized by its hardness, and the tulip contact by its excellent tension properties. The advantage: each function is supported by the most suitable material to reliably and constantly meet the different electrical and mechanical requirements. To put it in a nutshell: Instead of either... or, it s even both perfect for the current, and perfect for the force. C 12,2 0.48" 12,2 0.48" 17, " OMNIMTE Signal 23, " 23, " Colour orange black 5.08 ol. (inch) Qty. Order No. Order No Colour orange black 5.08 ol. (inch) Qty. Order No. Order No

210 Connectors in 5.08 pitch Series BL/SL 5.08 OMNIMTE Signal BLZ 5.08/../180 Q2 Female plug with clampingyoke screw connection and internal crossconnections for the 12 & 34 wire connections; with straight wire outlet. Bus signals of up to 32 can be safely looped through This permits an interruptionfree decoupling of individual modules from the network. Folded steel clamping yoke accoodates the connected wire and compensates for temperature fluctuations The crossconnections are clearly marked. roduct data IEC: 400 / 17.5 / ² UL: 300 / 15 / WG Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. Wire end ferrule without plastic collar to DIN 46228/1 Wire end ferrule with plastic collar to DIN 46228/4 on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. BLZ 5.08/../180 Q2 with crossconnection + 15, " 20, " 11, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance x 3.5 DIN C 40 C 2.5 III III II BT 0 Copper alloy tinned ccessories Note: Refer to the ccessories chapter for additional accessories. Strain relief Order No. BLZ 5.08 ZE4 OR BLZ 5.08 ZE4 SW BLZ 5.08 ZE8 OR BLZ 5.08 ZE8 SW Coding BLZ/SL KO OR BLZ/SL KO SW Screwdriver SD 0,6x3,5x SDI 0,6x3,5x Colour orange black 5.08 ol. (inch) Qty. Order No. Order No Representative derating curve

211 Connectors in 5.08 pitch Series BL/SL 5.08 with crossconnection + 3 x 15, " 20, " Examples of applications owersupply 0 I Modul I Modul I xx olt/32 + I total = 32 The 2in1 contact Every pluggable connector covers two contact points and thus must meet two different requirements: First, the wire termination and second, the connection between plug and pin header. Referring to the 5.0x pitch series, Weidmüller offers different wire connection technologies, but one platform contact for the male / female connection since years. This welldesigned hybride platform contact ensures a constant quality on a very high level. Hybride means, that we combine metal material featuring different characteristics by welding, in order to devide the contact system into different function zones: Further to the high electric conductance, the current bar is characterized by its hardness, and the tulip contact by its excellent tension properties. The advantage: each function is supported by the most suitable material to reliably and constantly meet the different electrical and mechanical requirements. To put it in a nutshell: Instead of either... or, it s even both perfect for the current, and perfect for the force. OMNIMTE Signal C 11, " Switch off module prior to disconnecting Colour orange black 5.08 ol. (inch) Qty. Order No. Order No Modul I Modul I I module 15 /ol 32 maximum bus current 15 maximum module current

Connectors in 5.08 pitch Series BL/SL 5.08 OMNIMTE Signal BLZ DN 5.08/../180 Female plug with clampingyoke screw connection and straight wire outlet; used as terminating piece in bus applications.

212 Connectors in 5.08 pitch Series BL/SL 5.08 OMNIMTE Signal BLZ DN 5.08/../180 Female plug with clampingyoke screw connection and straight wire outlet; used as terminating piece in bus applications. manual diagnosis can be carried out using the test point. The goldplated contact system can be plugged in and disconnected up to 1000 times. DeviceNet colour markings are clearly visible Folded steel clamping yoke accoodates the connected wire and compensates for temperature fluctuations vailbale with screw flange (F). roduct data IEC: 400 / 15 / ² UL: 300 / 15 / WG Note: dditional colours on request related to rated crosssection and min. No. of poles. Wire end ferrule without plastic collar to DIN 46228/1 Wire end ferrule with plastic collar to DIN 46228/4 on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. BLZ DN 5.08/../180 U with test point 21,2 0,835" 15,25 0,6" 5,08 0,2" 25,4 1" 8,3 0,327" Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance x 3.5 DIN C 40 C 2.5 III III II BT 0 Copper alloy goldplated ccessories Note: Refer to the ccessories chapter for additional accessories. Strain relief Order No. BLZ 5.08 ZE4 OR BLZ 5.08 ZE4 SW Coding BLZ/SL KO OR BLZ/SL KO SW Screwdriver SD 0,6x3,5x SDI 0,6x3,5x Colour 5.08 gate grey ol. (inch) Qty. Order No Representative derating curve

213 Connectors in 5.08 pitch Series BL/SL 5.08 with test point BLCK BLUE WHITE RED 21,2 0,835" The 2in1 contact Every pluggable connector covers two contact points and thus must meet two different requirements: First, the wire termination and second, the connection between plug and pin header. Referring to the 5.0x pitch series, Weidmüller offers different wire connection technologies, but one platform contact for the male / female connection since years. This welldesigned hybride platform contact ensures a constant quality on a very high level. Hybride means, that we combine metal material featuring different characteristics by welding, in order to devide the contact system into different function zones: Further to the high electric conductance, the current bar is characterized by its hardness, and the tulip contact by its excellent tension properties. The advantage: each function is supported by the most suitable material to reliably and constantly meet the different electrical and mechanical requirements. To put it in a nutshell: Instead of either... or, it s even both perfect for the current, and perfect for the force. OMNIMTE Signal C 15,25 0,6" 8,3 35,2 0,327" 1,386" Colour 5.08 gate grey ol. (inch) Qty. Order No

Connectors in 5.08 pitch Series BL/SL 5.08 OMNIMTE Signal BLDZ DN 5.08/../180F Bus plug with two connections per pole, with clampingyoke screw connection Bus signals can be safely looped through (e.g., DeviceNet) This permits an interruptionfree decoupling of individual modules from the network.

214 Connectors in 5.08 pitch Series BL/SL 5.08 OMNIMTE Signal BLDZ DN 5.08/../180F Bus plug with two connections per pole, with clampingyoke screw connection Bus signals can be safely looped through (e.g., DeviceNet) This permits an interruptionfree decoupling of individual modules from the network. manual diagnosis can be carried out using the test point. The goldplated contact system can be plugged in and disconnected up to 1000 times. DeviceNet colour markings are clearly visible Folded steel clamping yoke accoodates the connected wire and compensates for temperature fluctuations roduct data IEC: 400 / 16 / ² UL: 300 / 15 / WG Note: dditional colours on request related to rated crosssection and min. No. of poles. Wire end ferrule without plastic collar to DIN 46228/1 Wire end ferrule with plastic collar to DIN 46228/4 on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. BLDZ DN 5.08/../180F U with test point and connector guide 35 1,378" 21, " " 28, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance x 3.5 DIN C 40 C 2.5 III III II BT 0 Copper alloy goldplated ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BLZ/SL KO OR BLZ/SL KO SW Screwdriver SD 0,6x3,5x SDI 0,6x3,5x Colour 5.08 gate grey ol. (inch) Qty. Order No Representative derating curve

215 The 2in1 contact Every pluggable connector covers two contact points and thus must meet two different requirements: First, the wire termination and second, the connection between plug and pin header. Referring to the 5.0x pitch series, Weidmüller offers different wire connection technologies, but one platform contact for the male / female connection since years. This welldesigned hybride platform contact ensures a constant quality on a very high level. Hybride means, that we combine metal material featuring different characteristics by welding, in order to devide the contact system into different function zones: Further to the high electric conductance, the current bar is characterized by its hardness, and the tulip contact by its excellent tension properties. The advantage: each function is supported by the most suitable material to reliably and constantly meet the different electrical and mechanical requirements. To put it in a nutshell: Instead of either... or, it s even both perfect for the current, and perfect for the force. OMNIMTE Signal C

216 Connectors in 5.08 pitch Series BL/SL 5.08 OMNIMTE Signal BLDT 5.08/../180 Bus plug with two connections per pole, with clampingyoke screw connection Bus signals can be safely looped through This permits an interruptionfree decoupling of individual modules from the network. Large labelling area on the top side Folded steel clamping yoke accoodates the connected wire and compensates for temperature fluctuations roduct data IEC: 400 / 14 / ² UL: 300 / 10 / WG Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. Wire end ferrule without plastic collar to DIN 46228/1 Wire end ferrule with plastic collar to DIN 46228/4 on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. BLDT 5.08/../180 L , " 23, " 18, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance x 3.5 DIN C 40 C 2.5 III III II BT 0 Copper alloy tinned ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BLZ/SL KO OR BLZ/SL KO SW Screwdriver SD 0,6x3,5x SDI 0,6x3,5x Colour orange black 5.08 ol. (inch) Qty. Order No. Order No Representative derating curve

Connectors in 5.08 pitch Series BL/SL 5.08 + + 2 + + 0.079" 23,3 0.917" 26,8 1.

217 Connectors in 5.08 pitch Series BL/SL " 23, " 26, " The 2in1 contact Every pluggable connector covers two contact points and thus must meet two different requirements: First, the wire termination and second, the connection between plug and pin header. Referring to the 5.0x pitch series, Weidmüller offers different wire connection technologies, but one platform contact for the male / female connection since years. This welldesigned hybride platform contact ensures a constant quality on a very high level. Hybride means, that we combine metal material featuring different characteristics by welding, in order to devide the contact system into different function zones: Further to the high electric conductance, the current bar is characterized by its hardness, and the tulip contact by its excellent tension properties. The advantage: each function is supported by the most suitable material to reliably and constantly meet the different electrical and mechanical requirements. To put it in a nutshell: Instead of either... or, it s even both perfect for the current, and perfect for the force. OMNIMTE Signal C 18, " Colour orange black 5.08 ol. (inch) Qty. Order No. Order No

218 Connectors in 5.08 pitch Series BL/SL 5.08 OMNIMTE Signal BLF 5.08/../180 USH IN Weidmüller s innovative connection system simplifies and accelerates the wire connection process. Solid wires and stranded wires with ferrules need only to be inserted and they are ready. The actuator must be used when connecting stranded wires without ferrules. Intuitive handling since the wireentry area and handling area are clearly separated. Userfriendly handling with rounded outer edges and large, noslip push buttons. Lock and release lever: toolless locking and a gentle releasing of the connector reduces the mechanical stress to the solder soints. roduct data IEC: 400 / 20.5 / ² UL: 300 / 10 / WG Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. Wire end ferrule without plastic collar to DIN 46228/1 Wire end ferrule with plastic collar to DIN 46228/4 on drg. = pitch BLF 5.08/../ , " 14, " 19, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance x 3.5 DIN C 40 C 2.5 III III II BT 0 CuSn tinned ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BLZ/SL KO OR BLZ/SL KO SW Screwdriver SD 0,6x3,5x SDI 0,6x3,5x Wireend ferrule H0,5/14S W H1,0/14S R H1,5/14S SW H2,5/14S BL Colour orange black 5.08 ol. (inch) Qty. Order No. Order No Representative derating curve

219 Connectors in 5.08 pitch Series BL/SL 5.08 BLF 5.08/../180LR with release latch USH IN connection technology USH IN connection technology reduces the wiring affords especially for solid wires and wires with ferrule to a minimum. These connectors are selfexplanary and enable toolless handling. The contact element made of stainless steel ensures a vibration prooved, maintainance free wire termination. The established principle STEEL FOR THE FORCE, COER FOR THE CURRENT by Weidmüller offers both, maximum conductor clamping forces, as well as minimum power loss at the same time. OMNIMTE Signal C + + 9, " 27, " + + 9, " 27, " 14, " 14, " 18, " 19, " 19, " Colour orange black 5.08 ol. (inch) Qty. Order No. Order No Colour orange black 5.08 ol. (inch) Qty. Order No. Order No The 2in1 contact Every pluggable connector covers two contact points and thus must meet two different requirements: First, the wire termination and second, the connection between plug and pin header. Referring to the 5.0x pitch series, Weidmüller offers different wire connection technologies, but one platform contact for the male / female connection since years. This welldesigned hybride platform contact ensures a constant quality on a very high level. Hybride means, that we combine metal material featuring different characteristics by welding, in order to devide the contact system into different function zones: Further to the high electric conductance, the current bar is characterized by its hardness, and the tulip contact by its excellent tension properties. The advantage: each function is supported by the most suitable material to reliably and constantly meet the different electrical and mechanical requirements. To put it in a nutshell: Instead of either... or, it s even both perfect for the current, and perfect for the force.

Connectors in 5.08 pitch Series BL/SL 5.08 OMNIMTE Signal BLF 5.08/../90 USH IN Weidmüller s innovative connection system simplifies and accelerates the wire connection process.

220 Connectors in 5.08 pitch Series BL/SL 5.08 OMNIMTE Signal BLF 5.08/../90 USH IN Weidmüller s innovative connection system simplifies and accelerates the wire connection process. Solid wires and stranded wires with ferrules need only to be inserted and they are ready. The actuator must be used when connecting stranded wires without ferrules. Intuitive handling since the wireentry area and handling area are clearly separated. Userfriendly handling with rounded outer edges and large, noslip push buttons. Lock and release lever: toolless locking and a gentle releasing of the connector reduces the mechanical stress to the solder soints. roduct data IEC: 400 / 20 / ² UL: 300 / 10 / WG Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. Wire end ferrule without plastic collar to DIN 46228/1 Wire end ferrule with plastic collar to DIN 46228/4 on drg. = pitch BLF 5.08/../ , " 26, " 17, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance x 3.5 DIN C 40 C 2.5 III III II BT 0 CuSn tinned ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BLZ/SL KO OR BLZ/SL KO SW Screwdriver SD 0,6x3,5x SDI 0,6x3,5x Wireend ferrule H0,5/14S W H1,0/14S R H1,5/14S SW H2,5/14S BL Colour orange black 5.08 ol. (inch) Qty. Order No. Order No Representative derating curve

221 Connectors in 5.08 pitch Series BL/SL 5.08 BLF 5.08/../90LR with release latch USH IN connection technology USH IN connection technology reduces the wiring affords especially for solid wires and wires with ferrule to a minimum. These connectors are selfexplanary and enable toolless handling. The contact element made of stainless steel ensures a vibration prooved, maintainance free wire termination. The established principle STEEL FOR THE FORCE, COER FOR THE CURRENT by Weidmüller offers both, maximum conductor clamping forces, as well as minimum power loss at the same time. OMNIMTE Signal C + + 9, " 20, " + + 9, " 22, " 26, " 17, " 26, " 17, " Colour orange black 5.08 ol. (inch) Qty. Order No. Order No Colour orange black 5.08 ol. (inch) Qty. Order No. Order No The 2in1 contact Every pluggable connector covers two contact points and thus must meet two different requirements: First, the wire termination and second, the connection between plug and pin header. Referring to the 5.0x pitch series, Weidmüller offers different wire connection technologies, but one platform contact for the male / female connection since years. This welldesigned hybride platform contact ensures a constant quality on a very high level. Hybride means, that we combine metal material featuring different characteristics by welding, in order to devide the contact system into different function zones: Further to the high electric conductance, the current bar is characterized by its hardness, and the tulip contact by its excellent tension properties. The advantage: each function is supported by the most suitable material to reliably and constantly meet the different electrical and mechanical requirements. To put it in a nutshell: Instead of either... or, it s even both perfect for the current, and perfect for the force.

Connectors in 5.08 pitch Series BL/SL 5.08 OMNIMTE Signal BLF 5.08/../270 USH IN Weidmüller s innovative connection system simplifies and accelerates the wire connection process.

222 Connectors in 5.08 pitch Series BL/SL 5.08 OMNIMTE Signal BLF 5.08/../270 USH IN Weidmüller s innovative connection system simplifies and accelerates the wire connection process. Solid wires and stranded wires with ferrules need only to be inserted and they are ready. The actuator must be used when connecting stranded wires without ferrules. Intuitive handling since the wireentry area and handling area are clearly separated. Userfriendly handling with rounded outer edges and large, noslip push buttons. Lock and release lever: toolless locking and a gentle releasing of the connector reduces the mechanical stress to the solder soints. roduct data IEC: 400 / 20 / ² UL: 300 / 10 / WG Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. Wire end ferrule without plastic collar to DIN 46228/1 Wire end ferrule with plastic collar to DIN 46228/4 on drg. = pitch BLF 5.08/../ , " 26, " 17, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance x 3.5 DIN C 40 C 2.5 III III II BT 0 CuSn tinned ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BLZ/SL KO OR BLZ/SL KO SW Screwdriver SD 0,6x3,5x SDI 0,6x3,5x Wireend ferrule H0,5/14S W H1,0/14S R H1,5/14S SW H2,5/14S BL Colour orange black 5.08 ol. (inch) Qty. Order No. Order No Representative derating curve

223 Connectors in 5.08 pitch Series BL/SL 5.08 BLF 5.08/../270LR with release latch USH IN connection technology USH IN connection technology reduces the wiring affords especially for solid wires and wires with ferrule to a minimum. These connectors are selfexplanary and enable toolless handling. The contact element made of stainless steel ensures a vibration prooved, maintainance free wire termination. The established principle STEEL FOR THE FORCE, COER FOR THE CURRENT by Weidmüller offers both, maximum conductor clamping forces, as well as minimum power loss at the same time. OMNIMTE Signal C + + 9, " 20, " + + 9, " " 26, " 17, " 26, " 17, " Colour orange black 5.08 ol. (inch) Qty. Order No. Order No Colour orange black 5.08 ol. (inch) Qty. Order No. Order No The 2in1 contact Every pluggable connector covers two contact points and thus must meet two different requirements: First, the wire termination and second, the connection between plug and pin header. Referring to the 5.0x pitch series, Weidmüller offers different wire connection technologies, but one platform contact for the male / female connection since years. This welldesigned hybride platform contact ensures a constant quality on a very high level. Hybride means, that we combine metal material featuring different characteristics by welding, in order to devide the contact system into different function zones: Further to the high electric conductance, the current bar is characterized by its hardness, and the tulip contact by its excellent tension properties. The advantage: each function is supported by the most suitable material to reliably and constantly meet the different electrical and mechanical requirements. To put it in a nutshell: Instead of either... or, it s even both perfect for the current, and perfect for the force.

224 Connectors in 5.08 pitch Series BL/SL 5.08 OMNIMTE Signal BLDF 5.08/../180 Bus connector with two connections per pole with the timesaving USH IN connection system. The extremely short crossconnection allows you to safely loop through bus currents of up to 22. This permits an interruptionfree decoupling of individual modules from the network. Solid wires and stranded wires with ferrules need only to be inserted and they are ready. n actuator must be used when connecting stranded wires with ferrules. Lock and releaselever: toolless locking and gentle releasing of the connector reduces the mechanical stress one the solder joints. roduct data IEC: 400 / 18.5 / ² UL: 300 / 10 / WG Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. Wire end ferrule without plastic collar to DIN 46228/1 Wire end ferrule with plastic collar to DIN 46228/4 on drg. = pitch BLDF 5.08/../ , " 28, " " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance x 3.5 DIN C 40 C 2.5 III III II BT 0 CuSn tinned ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BLZ/SL KO OR BLZ/SL KO SW Screwdriver SD 0,6x3,5x SDI 0,6x3,5x Wireend ferrule H0,5/14S W H1,0/14S R H1,5/14S SW H2,5/14S BL Colour orange black 5.08 ol. (inch) Qty. Order No. Order No

225 Connectors in 5.08 pitch Series BL/SL 5.08 BLDF 5.08/../180LR with release latch USH IN connection technology USH IN connection technology reduces the wiring affords especially for solid wires and wires with ferrule to a minimum. These connectors are selfexplanary and enable toolless handling. The contact element made of stainless steel ensures a vibration prooved, maintainance free wire termination. The established principle STEEL FOR THE FORCE, COER FOR THE CURRENT by Weidmüller offers both, maximum conductor clamping forces, as well as minimum power loss at the same time. OMNIMTE Signal C + + 9, " 28, " + + 9, " 28, " 24, " 24, " " " Colour orange black 5.08 ol. (inch) Qty. Order No. Order No Colour orange black 5.08 ol. (inch) Qty. Order No. Order No The 2in1 contact Every pluggable connector covers two contact points and thus must meet two different requirements: First, the wire termination and second, the connection between plug and pin header. Referring to the 5.0x pitch series, Weidmüller offers different wire connection technologies, but one platform contact for the male / female connection since years. This welldesigned hybride platform contact ensures a constant quality on a very high level. Hybride means, that we combine metal material featuring different characteristics by welding, in order to devide the contact system into different function zones: Further to the high electric conductance, the current bar is characterized by its hardness, and the tulip contact by its excellent tension properties. The advantage: each function is supported by the most suitable material to reliably and constantly meet the different electrical and mechanical requirements. To put it in a nutshell: Instead of either... or, it s even both perfect for the current, and perfect for the force.

226 Connectors in 5.08 pitch Series BL/SL 5.08 OMNIMTE Signal BLC 5.08/../180 The female plugs with crimp connection can be used for automatically preassembled cable harnesses. This results in significant cost savings. The contacts are optimised for crimping machines (facotry wiring). Contacts can also be connected with manual tools (field wiring). High component density because of very low height Large wire clamping range: ² Contacts can be delivered loose in bulk, or in tapepackaged strips. roduct data IEC: 400 / 21 UL: 300 / 10 / WG Note: dditional colours on request related to rated crosssection and min. No. of poles. Rated crosssection depends on crimp contact used. on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. BLC 5.08/../180R L , " 8, " 16, " 7, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C 2.5 III III II BT GF 0 Copper alloy ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BLZ/SL KO OR BLZ/SL KO SW DFFC SN DFFC SN E DFFC SN DFFC SN E DFFC SN DFFC SN E Crimping tool HTF DFF Colour orange black 5.08 ol. (inch) Qty. Order No. Order No Representative derating curve

227 Connectors in 5.08 pitch Series BL/SL 5.08 C L , " 10, " OMNIMTE Signal 8, " 16, " Colour orange black 5.08 ol. (inch) Qty. Order No. Order No

228 Connectors in 5.08 pitch Series BL/SL 5.08 OMNIMTE Signal BLL 5.08/../90 Female headers for mounting on the circuit board; with 90 wire outlet, optimised for the wave soldering process. BLL 5.08 & SL 5.08 for boardtoboard connections (e.g., backplanes) BLL 5.08 & SLS / SLT 5.08 for boardtowire applications (e.g., power supply for actuators) vailable with a screw flange (F). roduct data IEC: 400 / 23 UL: 300 / 15 Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. BLL 5.08/../90 L , " 20, " 7, " 5,08 0.2" 1, " 11, " 1,3+0, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II BT GF 0 Copper alloy tinned 0.4 x ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BLZ/SL KO OR BLZ/SL KO SW Mounting block SL BB11R OR SL BB11R SW Colour orange ol. (inch) Qty. Order No

229 Connectors in 5.08 pitch Series BL/SL 5.08 L " C 10, " OMNIMTE Signal 4, " " 20, " 1,3+0, " Colour orange ol. (inch) Qty. Order No

Connectors in 5.08 pitch Series BL/SL 5.08 OMNIMTE Signal BLL 5.08/../180 Female headers for mounting on the circuit board; with straight wire outlet, optimised for the wave soldering process. BLL 5.08 & SL 5.

230 Connectors in 5.08 pitch Series BL/SL 5.08 OMNIMTE Signal BLL 5.08/../180 Female headers for mounting on the circuit board; with straight wire outlet, optimised for the wave soldering process. BLL 5.08 & SL 5.08 for boardtoboard connections (e.g., backplanes) BLL 5.08 & SLS / SLT 5.08 for boardtowire applications (e.g., power supply for actuators) roduct data IEC: 400 / 23 UL: 300 / 15 Note: dditional colours on request Goldplated contact surfaces on request related to rated crosssection and min. No. of poles. on drg. = pitch Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. BLL 5.08/../180 L , " 20, " 11, " 5,08 0.2" 1, " 7, " 1,3+0, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II BT GF 0 Copper alloy tinned 0.4 x ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. BLZ/SL KO OR BLZ/SL KO SW Mounting block SL BB11R OR SL BB11R SW Colour orange ol. (inch) Qty. Order No

231 Connectors in 5.08 pitch Series BL/SL 5.08 L , " C 20, " 11, " OMNIMTE Signal 5,08 0.2" 1, " 7, " 1,3+0, " Colour orange ol. (inch) Qty. Order No

232 Connectors in 5.00 pitch Series RS Explanation OMNIMTE Signal RS 1.6 CB / CS Highest flexibility with the highest density space miracle for the CB and the field wiring permits up to 36 contacts to be inserted in one operation. The crimp contacts ensure that the contacts can be quickly and flexibly assembled their plastic cases automatically snap together when joined. This system can be used for many signalling purposes: whether it is soldered on to the circuit board, mounted on the rail using a mountingrail foot, or built in to the front of the device. This product line also includes versatile coding elements, a choice between tin or gold surfaces, and snapon plug hoods. ersatile systembased wiring ery versatile assembly: different functions can be combined with different wire crosssections (from 0.14 ² to 2.5 ²). Tinplated or goldplated contact surfaces can be custom selected from pole to pole based on your application requirements. This delivers clear cost savings. Higher voltages may require larger clearance gaps between the contacts. This problem can be solved without changing to a different type of connector by simply occupying every second pole.

low currents or voltages, such as those used with measurements.

233 Connectors in 5.00 pitch Series RS Explanation OMNIMTE Signal lso with gold contacts to meet application requirements Goldplated contacts are the best solution for very low currents or voltages, such as those used with measurements. Gold surfaces are a reliable safeguard against friction corrosion caused by longterm vibrations. Compared to tin contacts which are rated for 100 plugging cycles, goldplated contacts have an increased rating of 500 plugging cycles. C Highest component assembly density for 5 pitch Every square is crucial on the circuit board. The RS permit 36 poles to fit in a 5 pitch on a 40 x 29 surface.

234 Connectors in 5.00 pitch Series RS Quick selection OMNIMTE Signal = Wire to board = Wire to wire = Board to wire = Board to board Male header Solder connection Male plug Crimp Levels 1 1 Type RS1.6 LS.. SN RS1.6 LS.. U RS1.6 CS.. Contact surface Tin Gold Tin / Gold Flange options (G)/F (G)/F (G) age C.244 C.248 C.252 Female plug Crimp RS1.6 CB.. Tin / Gold (G) C.253 Female header Solder connection RS1.6 LB.. SN Tin (G)/F C.246 RS1.6 LB.. U Gold (G)/F C.250 (G)* = Closed (without flange) F = Flange * = not included in the article description

235 Connectors in 5.00 pitch Series RS OMNIMTE Signal RS1.6 LS.. Rectangular plugin male connector with solder contacts for CB applications. High connection density achieved by using several rows and crimp contacts in the mating connector. The plugin connectors can be coded and locked to the mating connector. Supplied in cardboard box. roduct data IEC: 500 / 14 UL: 300 / 10 Note: dditional colours on request related to rated crosssection and min. No. of poles. Spacing between rows: see hole layout Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. RS1.6 LS.. SN +7, " L2+13,8 L " 11, " L2 4, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II Wemid () 0 Copper alloy tinned ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. RS1,6 KO Colour pebble grey ol. (inch) Qty. Order No Representative derating curve

236 Connectors in 5.00 pitch Series RS Drilling diagrams 4pole " L " Ø " OMNIMTE Signal " " L2 6pole L " " Ø " C +7, " L2+13,8 L " " " 11, " 9pole +17, " L2 4, " L " " Ø " " Colour pebble grey ol. (inch) Qty. Order No pole L2 18pole " " " Ø " " 0.197" Ø " " L2 24pole " " 0.197" " L2 Ø " dditional derating curves 36pole L " " " Ø "

237 Connectors in 5.00 pitch Series RS OMNIMTE Signal RS1.6 LB.. Rectangular plugin female connector with solder contacts for CB applications. High connection density achieved by using several rows and crimp contacts in the mating connector. The plugin connectors can be coded and locked to the mating connector. Supplied in cardboard box. roduct data IEC: 500 / 14 UL: 300 / 10 Note: dditional colours on request related to rated crosssection and min. No. of poles. Spacing between rows: see hole layout Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. RS1.6 LB.. SN +7, " L2+8,5 L " 14, " L2 4, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II Wemid () 0 Copper alloy tinned ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. RS1,6 KO Colour pebble grey ol. (inch) Qty. Order No Representative derating curve

238 Connectors in 5.00 pitch Series RS Drilling diagrams 4pole " L " Ø " OMNIMTE Signal " " L2 6pole L " " Ø " C +7, " L2+8,5 L " " " 14, " 9pole +17, " L2 4, L " " Ø " " Colour pebble grey ol. (inch) Qty. Order No pole L2 18pole " " " Ø " " 0.197" Ø " " L2 24pole " " 0.197" " L2 Ø " dditional derating curves 36pole L " " " Ø "

239 Connectors in 5.00 pitch Series RS OMNIMTE Signal RS1.6 LS.. U Rectangular plugin male connector with solder contacts for CB applications. High connection density achieved by using several rows and crimp contacts in the mating connector. The plugin connectors can be coded and locked to the mating connector. Supplied in cardboard box. roduct data IEC: 500 / 14 UL: 300 / 10 Note: dditional colours on request related to rated crosssection and min. No. of poles. Spacing between rows: see hole layout Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. RS1.6 LS.. U +7, " L2+13,8 L " 11, " L2 4, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II Wemid () 0 Copper alloy goldplated ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. RS1,6 KO Colour pebble grey ol. (inch) Qty. Order No Representative derating curve

240 Connectors in 5.00 pitch Series RS Drilling diagrams 4pole " L " Ø " OMNIMTE Signal " " L2 6pole L " " Ø " C +7, " L2+13,8 L " " " 11, " 9pole +17, " L2 4, " L " " Ø " " Colour pebble grey ol. (inch) Qty. Order No pole L2 18pole " " " Ø " " 0.197" Ø " " L2 24pole " " 0.197" " L2 Ø " dditional derating curves 36pole L " " " Ø "

241 Connectors in 5.00 pitch Series RS OMNIMTE Signal RS1.6 LB.. U Rectangular plugin female connector with solder contacts for CB applications. High connection density achieved by using several rows and crimp contacts in the mating connector. The plugin connectors can be coded and locked to the mating connector. Supplied in cardboard box. roduct data IEC: 500 / 14 UL: 300 / 10 Note: dditional colours on request related to rated crosssection and min. No. of poles. Spacing between rows: see hole layout Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. RS1.6 LB.. U +7, " L2+8,5 L " 14, " L2 4, " Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II Wemid () 0 Copper alloy goldplated ,1 ccessories Note: Refer to the ccessories chapter for additional accessories. Coding Order No. RS1,6 KO Colour pebble grey ol. (inch) Qty. Order No Representative derating curve

242 Connectors in 5.00 pitch Series RS Drilling diagrams 4pole " L " Ø " OMNIMTE Signal " " L2 6pole L " " Ø " C +7, " L2+8,5 L " " " 14, " 9pole +17, " L2 4, L " " Ø " " Colour pebble grey ol. (inch) Qty. Order No pole L2 18pole " " " Ø " " 0.197" Ø " " L2 24pole " " 0.197" " L2 Ø " dditional derating curves 36pole L " " " Ø "

Connectors in 5.00 pitch Series RS OMNIMTE Signal RS1.6 CS.. & CB.. roduct data IEC: 630 / 17 UL: 600 / 10 / WG 26 12 Note: RS1.6 CS.. max. outer diameter of the cable (with insulation): 3.

6 or CB 1.6 contacts are used here. The connectors can be coded and locked together with their mates. Supplied in cardboard box.

243 Connectors in 5.00 pitch Series RS OMNIMTE Signal RS1.6 CS.. & CB.. roduct data IEC: 630 / 17 UL: 600 / 10 / WG Note: RS1.6 CS.. max. outer diameter of the cable (with insulation): 3.5 Rectangular plugin connector for use with crimp contacts. Can be used as universal coupling, but also with the CB variations. The crimp contacts guarantee a high connection density. The CS 1.6 or CB 1.6 contacts are used here. The connectors can be coded and locked together with their mates. Supplied in cardboard box. Technical data In compliance with IEC / IEC Clamping range, max. ² Solid core H05(07) U ² Stranded H07 R Flexible H05(07) K ² Flexible with ferrule ² Ferrule with plastic collar ² Stripping length Screwdriver blade ccording to norm Tightening torque range Nm, max. t ambient temperature For conductor crosssection ² Overvoltage category ollution severity Rated impulse voltage k UL / CUL (Use Group) WG conductor WG CS (Use Group) WG conductor WG General data Type of insulation material Flaability class UL 94 Contact base material Material of contact surface in dimensions = d Solder eyelet Ø = D Solder eyelet Ø tolerance C 40 C III III II Wemid () 0 Copper alloy ccessories Note: Refer to the ccessories chapter for additional accessories. Release tool Order No. DW RS Crimping tool HTF RS 16 WI Clipin foot RS1,6 RF12/35x15 SW RS1,6 RF12/35x7.5 SW RS1,6 RF18/35x15 SW RS1,6 RF18/35x7.5 SW RS1,6 RF24/35x15 SW RS1,6 RF24/35x7.5 SW RS1,6 RF36/35x15 SW RS1,6 RF36/35x7.5 SW RS1,6 RF4/35x15 SW RS1,6 RF4/35x7.5 SW RS1,6 RF6/35x15 SW RS1,6 RF6/35x7.5 SW RS1,6 RF9/35x15 SW RS1,6 RF9/35x7.5 SW Strain relief RS1,6 ZE 12 SW RS1,6 ZE 18 SW RS1,6 ZE 24 SW RS1,6 ZE 36 SW RS1,6 ZE 4 SW RS1,6 ZE 6 SW RS1,6 ZE 9 SW Coding RS1,6 KO Colour 5.00 pebble grey ol. (inch) Qty. Order No Representative derating curve

00 0.984 20 1418000000 36 40.00 1.575 10 1419000000 b Mounting cutout for enclosure RS 1.6 Wall thickness 1.5 2.0 a R 0.25 max. No. of poles Dim.

244 Connectors in 5.00 pitch Series RS Mounting cutout OMNIMTE Signal C Spring clips ensure firm hold in enclosure wall Colour 5.00 pebble grey ol. (inch) Qty. Order No b Mounting cutout for enclosure RS 1.6 Wall thickness a R 0.25 max. No. of poles Dim. a ()* Dim. b ()* *) Tolerance: +0.3

Connectors in 5.00 pitch Series RS OMNIMTE Signal Contact system CB 1.6 / CS 1.6 CB 1.6 / CS 1.6 Crimp contacts 4 0.157" 4 0.157" 20.6 0.811" 27.2 1.070" CB socket CS pin standard 4 0.157" 28.7 1.

245 Connectors in 5.00 pitch Series RS OMNIMTE Signal Contact system CB 1.6 / CS 1.6 CB 1.6 / CS 1.6 Crimp contacts " " " " CB socket CS pin standard " " CSL pin long Tinned contacts For cable size Insulation diameter Separate contacts Cont. on a strip 2 WG Order No. Qty. Order No. Qty pin standard pin long socket pin standard pin long socket pin standard pin long socket pin standard pin long socket pin standard pin long socket pin standard pin long socket pin standard pin long socket Goldplated contacts Safe centring of the contacts using the threesegment pin tips 4 defined contact points ensure high contact stability Lugs in the enclosing steel spring ensure the contact engages securely in the housing in contacts with two lengths to implement leadingpin contacts Up to 100 plugging cycles (tin version) Up to 500 plugging cycles (gold version) For cable size Insulation diameter Separate contacts Cont. on a strip 2 WG Order No. Qty. Order No. Qty pin standard pin long socket pin standard pin long socket pin standard pin long socket pin standard pin long socket pin standard pin long socket pin standard pin long socket pin standard pin long socket

IEC: 320 V / 17.5 A UL: 300 V / 10 A. For additional articles and information, refer to catalog.weidmueller.com

IEC: 320 V / 17.5 A UL: 300 V / 10 A. For additional articles and information, refer to catalog.weidmueller.com Connectors in 3.81 pitch OMNIMTE Signal CB connectors in 3.81 pitch SC 3.81/../90 Male header with plugging direction in parallel to the circuit board. vailable in closed (G) version and with screw flange