SD Memory Card Connectors

Size: px
Start display at page:

Download "SD Memory Card Connectors"

Transcription

1 SD Memory Card Connectors DM Series Withstands higher force of card insertion. Card Nov..6 Feb..8 Copyright 8 6 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features. Withstands higher force of card insertion Metal cover extends over the back of the connector allowing it to withstand force of up to 4N (static load) when dropped or accidentally hit. (Fig.). No damage to the card when accidentally pulled-out The connectors will release the card when a moderate pull-out force of about 4N is applied. There will be no damage to the lock components and all connector functions will not be affected. (Fig.) 3. Accidental card fall-out prevention Built-in lock feature holds the card securely in place. (Fig.3) 4. Reliable Card Insertion and Withdrawal Built-in Push-in / Push-out ejection mechanism assures simple and reliable card insertion and withdrawal. 5. Designed to accept Secure Digital I/O card (Built-in Ground Contact) The connector allows use of various expansion modules, including the Bluetooth communication modules. Standard type Metal cover extends over the back of the connector. Metal cover extends over the back of the connector. No damage to the card when accidentally pulled-out. Accidental card fall-out prevention Card Reverse type Fig. Fig. Fig.3 C39

2 Product Specifications Current rating.5a DC Rating Voltage rating 5V AC Operating temperature range : -5ç to +85ç (Note ) Storage temperature range : -4ç to +85ç (Note ) Operating humidity range : Relative humidity 95% max. (No condensation) Nov..6 Feb..8 Copyright 8 6 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Item Specification Conditions. Insulation resistance. Withstanding voltage 3. Contact resistance 4. Vibration 5. Humidity 6. Temperature cycle Mø min. (Initial value) No flashover or insulation breakdown mø max. (Initial value) No electrical discontinuity of ns or more Contact resistance : 4mø max. from initial value Insulation resistance : Mø min. Contact resistance : 4mø max. from initial value Insulation resistance : Mø min. 7. Durability (mating/un-mating) Contact resistance : 4mø max. from initial value 8. Resistance to soldering heat No deformation of components affecting performance. DM AA - SF - PEJ 5V DC 5V AC / one minute ma DC Frequency : to 55Hz, single amplitude of.75mm, hours / 3 axis 96 hours at temperature of 4ç ± ç and humidity of 9% to 95% Temperature : -55ç/ +5ç to +35ç/ +85ç/ +5ç to +35ç Duration : 3 / 5 / 3 / 5 (Minutes) 5 cycles cycles at 4 to 6 cycles per hour Reflow : At the recommended temperature profile Manual soldering : 35ç for 3 seconds Note : Includes temperature rise caused by current flow. Note : The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation. Materials / Finish Component Material Finish Remarks Insulator Heat resistant thermoplastic compound Color: Black UL94V- Contacts Phosphor bronze Contact area: Gold plating Termination area: Tinned copper plating - Cover Stainless steel Termination area: Tinned copper plating - Others Stainless steel Piano wire Product Number Structure Series name Connector type 3 4 : DM : AA : Standard receptacle : B : Reverse receptacle - Nickel plating - 3 Terminal type SF : Right angle surface mount DSF : Reverse right angle surface mount 4 Eject mechanism codes PEJ : Card Push insert/push withdraw C4

3 Standard type BPCB mounting pattern 4.5±.5.7±.5 5.4±.5.4±.5 5±.5 P=.5± ± ±.5 ±.5.±.5 Nov..6 Feb..8 Copyright 8 6 HIROSE ELECTRIC CO., LTD. All Rights Reserved t=.,w= P Part No. HRS No. DMAA-SF-PEJ(8) (Card slot dimension).4 -Ø ±.5 8.5±.5 9.± No.4 No. No.3 No. No.9 No.5.6±.5 Card detection switch Write protection switch.±.5 No.6 No.7 No.8 indicates the center line of card slot. Card detection switch When card is ejected When card is inserted When card is ejected -Ø Write protection switch When card is inserted WRITE PROTECT WRITE ENABLE OPEN CLOSE OPEN OPEN CLOSE 4.55±.5 3.±.5 Weight:.g BCard insertion/withdrawal dimensions Card pushed-in for insertion Card fully inserted Card ejected (Card ejected dimension) C4

4 Reverse type BPCB mounting pattern -.5±.5.8±.5 P=.5±.5.5± ±.5.8±.5.± ±.5 8.5±.5.5± ±.5.8±.5.4±.5 CARD DETECT COMMON FOR CD & WP Nov..6 Feb..8 Copyright 8 6 HIROSE ELECTRIC CO., LTD. All Rights Reserved. 9.9 Part No. :Card ejected(card ejected dimension) (6):Card fully inserted (5):Card pushed for insertion (4.35) HRS No. DMB-DSF-PEJ(8) (Land) A(5:) B(5:) C(5:).3 +. (Through hole) (Land).8 +. (Through hole) (R.4) (R.6) (Land) 8.5±.5 3.5± (Through hole).5.35 C A 8-.±.5 Center of Card dimension (.77). +. (Land).8 +. (Through hole) (R.4) (R.6) 3 A 5.6.3±.5.57±.5.3±.5 4.3±.5 4.5±.5.93± (Land) +. (Through hole) No.7 No.6 No.5 No.4 No.3 No. No.8 No. No ±.5 B WP. +. (Land).8 +. (Through hole) (R.4) 3.48± ±.5 8.5±.5 (R.6) (.5) CLindicates the center line of the card slot. indicates the dimension of DIP terminals. Card detection switch When card When card is ejected is ejected OPEN CLOSE Write protection switch When card When card is ejected is ejected WRITE PROTECT WRITE ENABLE OPEN OPEN CLOSE Weight:.g C4

5 BPackaging specifications Embossed Carrier Tape Dimensions (Standard type) 45 pcs/reel.75±. Ø ±. ±.5 36±. 4.35±.3 3.4±.3 44±.3 Nov..6 Feb..8 Copyright 8 6 HIROSE ELECTRIC CO., LTD. All Rights Reserved. 4.4±. 44±.3 4.4±..±..75±. ±.5 4±. Unreeling direction Embossed Carrier Tape Dimensions(Reverse type) 45 pcs/reel.±. Reel dimensions Ø.5 +. D Unreeling direction 36±. 4.6±.3 3.4±.3 Unreeling direction (Ø5) (Ø38) End section Mounting section(45) Lead section (4mm min.) Blank section(6mm min.) Embossed carrier tape Blank section (mm min.) Top cover tape C43

6 Powered by TCPDF ( BRecommended Temperature Profile Nov..6 Feb..8 Copyright 8 6 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Temperature (ç) ç 3ç min. ç 9 to seconds Preheating Time (Seconds) Peak : 5ç MAX 5 seconds Soldering HRS test condition Solder method : Reflow, IR/hot air Environment : Room air Solder composition : Paste, 96.5%Sn/3.%Ag/.5%Cu (Senju Metal Industry, Co., Ltd.'s Part Number:M75-GRN36-K-V) Test board : Glass epoxy 6mm mm.mm thick Metal mask :.5mm thick Number of reflow cycles : cycles max. The temperature profiles shown are based on the above conditions. In individual applications the actual temperature may vary, depending on solder paste type, volume / thickness and board size / thickness. Consult your solder paste and equipment manufacturer for specific recommendations. C44

SD Memory Card Connectors

SD Memory Card Connectors SD Memory Card Connectors DM Series Withstands higher force of card insertion. Card Standard type Metal cover extends over the back of the connector. Features. Withstands higher force of card insertion

More information

microsd Card Connectors

microsd Card Connectors All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

microsd Card Connectors

microsd Card Connectors microsd Card Connectors DM Series Jan..08 Copyright 08 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features Common to the entire Series. Extremely small in size Small external dimensions and the above-the-board

More information

minisd TM Card Connectors

minisd TM Card Connectors All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

microsd Card Connectors

microsd Card Connectors NEW microsd Card Connectors DM Series Features Common to the entire Series. Extremely small size Small external dimensions and the above-the-board height make the connectors the smallest on the market..

More information

microsd Card Connectors

microsd Card Connectors NEW microsd Card Connectors DM Series Features Common to the entire Series. Extremely small size Small external dimensions and the above-the-board height make the connectors the smallest on the market..

More information

Interface Connectors for Portable Terminal Devices

Interface Connectors for Portable Terminal Devices Interface Connectors for Portable Terminal Devices ST Series Strong locking mechanism Right Mating axial direction Jan..0 Copyright 0 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Overview The ST Series

More information

Interface Connectors for Miniature, Portable Terminal Devices

Interface Connectors for Miniature, Portable Terminal Devices All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

Interface Connectors for Portable Terminal Devices

Interface Connectors for Portable Terminal Devices Interface Connectors for Portable Terminal Devices ST Series Strong locking mechanism Right Mating axial direction Overview The ST Series interface connectors are specifically designed for use as Input/Output

More information

Interface Connectors for Portable Terminal Devices

Interface Connectors for Portable Terminal Devices Interface Connectors for Portable Terminal Devices ST Series Overview The ST Series interface connectors are specifically designed for use as Input/Output (I/O) connectors on portable information devices.

More information

0.8mm Pitch Stacking Height 5 to 9mm Connector

0.8mm Pitch Stacking Height 5 to 9mm Connector 0.8mm Pitch Stacking Height 5 to 9mm Connector FX6 Series Stacking Height: 5 to 9mm 5~9mm Features 1. Stacking Height 5 to 9mm The board to board stacking height can be set at every millimeter between

More information

PC Card Single Slot SMT Connectors for the AV Market (that Support 5 V Cards)

PC Card Single Slot SMT Connectors for the AV Market (that Support 5 V Cards) PC Card Single Slot SMT Connectors for the V Market (that Support 5 V Cards) IC15 Series Reliable card ejection 2-point card ejection Card ejection distance 6mm min Equipment outline Stroke: 11.7mm Ejection

More information

0.4 mm Pitch, 1.5 mm Board-to-Board Connectors with Dual Shields

0.4 mm Pitch, 1.5 mm Board-to-Board Connectors with Dual Shields All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

1mm Pitch Double Rows Low Profile Wire-to-Board Connectors

1mm Pitch Double Rows Low Profile Wire-to-Board Connectors mm Pitch Double Rows Low Profile Wire-to-Board Connectors DF series Features. Contact Pitch mm contact pitch allows reliable solder and cable termination.. Reliable electrical connection wipe Effective

More information

Memory Stick Connectors

Memory Stick Connectors Memory Stick Connectors CB1 Series Card Push Insert/Push Eject Card ejection distance of 1 mm Mounting height of mm Mounting area: Smaller design is 78% of former size Outline Receptacle

More information

0.4 mm Contact Pitch 1.5 mm above the board Board-to-Board /Board-to-FPC Connectors

0.4 mm Contact Pitch 1.5 mm above the board Board-to-Board /Board-to-FPC Connectors All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

High Density FPC Connector (0.3mm/0.4mm/0.5mm Pitch)

High Density FPC Connector (0.3mm/0.4mm/0.5mm Pitch) High Density FPC Connector (0.3mm/0.4mm/0.5mm Pitch) FH16 Series FH16 Series Variation 0.3mm pitch 60 contact 0.3mm pitch 80 contact 0.3mm pitch 90 contact 0.4mm pitch 80 contact 0.5mm pitch 50 contact

More information

SIM Card Sockets. ID1 Series. Features. Applications

SIM Card Sockets. ID1 Series. Features. Applications SIM Card Sockets ID1 Series Miniature and Thin Photograph (1) Features 1. Suited for Plug-in SIM Cards of the GSM Standard (11.11) In Europe, SIM card Subscriber Identity Modules are used for subscriber

More information

0.5mm Pitch Low-Profile Board-to-Board/Board-to-FPC Connectors

0.5mm Pitch Low-Profile Board-to-Board/Board-to-FPC Connectors NEW.5mm Pitch Low-Profile Board-to-Board/Board-to-FPC Connectors DF23 Series Low profile - 1.5 mm board-to-board distance Board-to-Board Application Plug Board Receptacle Plug Board FPC -.1 1.5 +.2 -.1

More information

1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors

1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

0.5 mm Pitch, 6.18 mm Height, Vertical Mount, Shielded FFC High Speed Connectors

0.5 mm Pitch, 6.18 mm Height, Vertical Mount, Shielded FFC High Speed Connectors 0.5 mm Pitch, 6.18 mm Height, Vertical Mount, Shielded FFC High Speed Connectors FH48 Series Supports the next generation chip V-by-One HS* by THine *High speed serial interface technology for picture

More information

USB 2.0 Standard Connectors

USB 2.0 Standard Connectors USB 2.0 Standard Connectors UX Series Meets requirements of USB 2.0 Standard USB 2.0 certified Features 1. Compatible to USB 2.0 Standard The UX series connectors are certified by a certification organization

More information

0.4 mm Pitch, Space-saving Interface Connectors

0.4 mm Pitch, Space-saving Interface Connectors All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at your Hirose sales representative. NEW Series Small size.

More information

0.4 mm Contact Pitch Board-to-Board /Board-to-FPC Connectors

0.4 mm Contact Pitch Board-to-Board /Board-to-FPC Connectors .4 mm Contact Pitch Board-to-Board /Board-to-FPC Connectors DF4 Series Decrease in the board-occupied area Smaller width Other HRS connector DF4 3.38mm 5.mm Features 1. Higher density of the board-mounted

More information

Mini-B Connectors, SMT mount receptacles meeting requirements of USB 2.0 Standard

Mini-B Connectors, SMT mount receptacles meeting requirements of USB 2.0 Standard NEW Mini-B Connectors, SMT mount receptacles meeting requirements of USB 2.0 Standard UX60S Series Meets requirements of USB 2.0 Standard USB 2.0 certified Features. USB 2.0 Standard data transmission

More information

0.5 mm Pitch, 1.2 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors

0.5 mm Pitch, 1.2 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

Meet requirements of USB 2.0

Meet requirements of USB 2.0 NEW Meet requirements of USB.0 UX Series Features 1. Certified to perform as required in USB.0 Standard Tested and certified by USB Association approved laboratory the connectors will perform at transmission

More information

0.4 mm Contact Pitch, Board-to-FPC Connectors

0.4 mm Contact Pitch, Board-to-FPC Connectors .4 mm Contact Pitch, Board-to-FPC Connectors BM14 Series Mating Cross-Section Diagram (H =.8 mm type) Molded structure Two-point contact system Nov.1.217 Copyright 217 HIROSE ELECTRIC CO., LTD. All Rights

More information

2.54mm Pitch Board to Board Connector

2.54mm Pitch Board to Board Connector All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors

1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

0.5mm and 1mm Pitch, 2mm Height, FPC/FFC ZIF Connectors

0.5mm and 1mm Pitch, 2mm Height, FPC/FFC ZIF Connectors .5mm and mm Pitch, 2mm Height, FPC/FFC ZIF Connectors FH52 Series Secure actuator retention Metal fittings are designed to hold and stabilize the actuator May..27 Copyright 27 HIROSE ELECTRIC CO., LTD.

More information

USB 2.0 Standard Connectors

USB 2.0 Standard Connectors USB 2.0 Standard Connectors UX Series Meets requirements of USB 2.0 Standard USB 2.0 certified Features 1. Compatible to USB 2.0 Standard The UX series connectors are certified by a certification organization

More information

2mm Pitch Miniature Connector for HDD

2mm Pitch Miniature Connector for HDD 2mm Pitch Miniature Connector for HDD A3E Series Product Specifications Rating type without polarizing guide type with polarizing guide Features 1. Variation in Number of Contacts This connector can be

More information

1.25mm Pitch Miniature Crimping Connector

1.25mm Pitch Miniature Crimping Connector 1.25mm Pitch Miniature Crimping Connector DF13 Series Type Mounting Type Mounting Height(h) Features 1. Miniature Size Designed in the low profile at mounting height 5.8mm. (SMT mounting straight type)

More information

Compact Flash Card Connectors

Compact Flash Card Connectors Compact Flash Card Connectors Complies with Compact Flash Association MI2/2 Series (a)space-saving design 7. 5.75 Features. Compact design occupies minimum space Connectors are designed with small width

More information

2mm Pitch Miniature Connector

2mm Pitch Miniature Connector mm Pitch Miniature Connector A A Series Product Specifications Rating Features 1. Miniature Type and High Density Mounting These connectors are designed in a miniature and light weight product, and mounted

More information

2mm Pitch Miniature Connector

2mm Pitch Miniature Connector All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

2.54mm Pitch High Density Connector

2.54mm Pitch High Density Connector All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

1.27mm Pitch Multi-function Two Piece Connector

1.27mm Pitch Multi-function Two Piece Connector 1.27mm Pitch Multi-function Two Piece Connector FX2 Series Stacking connection (Stack height: 12~16mm) 12mm~16mm Features 1. Various connection with various product line 2. Easy One-Touch Operation Stacking

More information

0.4 mm Pitch, Horizontal Mating, Board-to-Micro-Coaxial Cable Connector

0.4 mm Pitch, Horizontal Mating, Board-to-Micro-Coaxial Cable Connector 0.4 mm Pitch, Horizontal Mating, Board-to-Micro-Coaxial Cable Connector DF81 Series Enhanced shielding capability Grounding connection between plug connector and receptacle connector 30 contacts: 5 locations

More information

2mm Pitch Miniature Connector

2mm Pitch Miniature Connector All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

USB3.0 Micro-B Connector

USB3.0 Micro-B Connector USB3.0 Micro-B Connector ZX360 Series General The ZX360 Series is a Micro-USB connector that is compliant with the MicroUSB 3.0 specifications and supports up to 5Gbps high speed data transmission. As

More information

2.54mm Pitch High Density Connector

2.54mm Pitch High Density Connector All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

2mm Pitch Miniature Connector for HDD

2mm Pitch Miniature Connector for HDD 2mm Pitch Miniature Connector for HDD A3E Series type without polarizing guide type with polarizing guide Features 1. Variation in Number of Contacts This connector can be chosen according to applications,

More information

Micro-Miniature Interface Connectors For Power Supply/Signaling

Micro-Miniature Interface Connectors For Power Supply/Signaling All non-rohs have been discontinued, or will be discontinued soon. Please check the status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. NEW

More information

0.6 mm Pitch, Docking Station Connectors

0.6 mm Pitch, Docking Station Connectors mm Pitch, Docking Station Connectors EX0 Series Features 1. Secure electrical and mechanical connection The signal contacts wipe of 1.5 mm and built-in selfalignment assures reliable connection between

More information

Single Slot SMT Connectors for Card-Bus Based PC Cards

Single Slot SMT Connectors for Card-Bus Based PC Cards Single Slot SMT onnectors for ard-us ased P ards I14 Series P ard Standard ompliant oard Space-Saving SMT Unit Guide Unit Secure board retention Features 1. Space-Saving design facilitates pattern routing

More information

1.27mm Pitch Multi-function Two Piece Connector

1.27mm Pitch Multi-function Two Piece Connector 1.27mm Pitch Multi-function Two Piece Connector FX2 Series Stacking connection (Stack height: 12~16mm) 12mm~16mm Horizontal Connection Vertical Connection 25mm Features 1. Various connection with various

More information

2mm Pitch Miniature Connector

2mm Pitch Miniature Connector mm Pitch Miniature Connector A A Series Features 1. Miniature Type and High Density Mounting These connectors are designed in a miniature and light weight product, and mounted in the high density. The

More information

2mm Pitch, Multi functional Connector System. (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short Pin)

2mm Pitch, Multi functional Connector System. (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short Pin) NEW 2mm Pitch, Multi functional Connector System. (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short Pin) DF59 Series Floating Structure in Three xial Directions (Board-to-Board Structure) X

More information

Modular Jack Connectors for High-Speed LAN Transmission

Modular Jack Connectors for High-Speed LAN Transmission Modular Jack Connectors for High-Speed LAN Transmission TM2R Series Built-in Optical Indicators Dec..207 Copyright 207 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features. Supports High-Speed LAN Transmission

More information

1.27mm Pitch Two-Piece Connectors

1.27mm Pitch Two-Piece Connectors 1.7mm Pitch Two-Piece Connectors HIF6 Series Connector in combination with the HIF6 series connection type HIF3B Series (MIL-C-833) HIF Series (Board direct mount type) Features 1. Product Variation The

More information

2mm Double-Row Connector (Product Compliant to UL/CSA Standard)

2mm Double-Row Connector (Product Compliant to UL/CSA Standard) 2mm Double-Row Connector (Product Compliant to UL/CS Standard) DF11 Series Features 1. Space-saving on Board Realized Double rows of 2mm pitch contact has been condensed within the 5mm width. The multiple

More information

Ultra-small Rack/Panel Crimp Connectors

Ultra-small Rack/Panel Crimp Connectors All non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.

More information

Modular Jack Connectors for High-Speed LAN Transmission

Modular Jack Connectors for High-Speed LAN Transmission NEW Modular Jack Connectors for High-Speed LAN Transmission TM2R Series Built-in Optical Indicators Optical indicator LED Optical pipe Features. Supports High-Speed LAN Transmission Meets requirements

More information

0.6 mm Pitch, Docking Station Connectors

0.6 mm Pitch, Docking Station Connectors All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

0.2 mm Pitch, 1.2 mm Height, FPC Connector

0.2 mm Pitch, 1.2 mm Height, FPC Connector 0.2 mm Pitch,.2 mm Height, FPC Connector FH29 Series Easy mounting with double-sided lead design.2 mm height,.55 mm mounting depth.2mm.55mm Features. Space saving 0.2 mm pitch FPC connector Super thin,

More information

Modular Jack Connectors for High-Speed LAN Transmission

Modular Jack Connectors for High-Speed LAN Transmission Modular Jack Connectors for High-Speed LAN Transmission TM2R Series Built-in Optical Indicators Optical indicator LED Optical pipe Features. Supports High-Speed LAN Transmission Meets requirements of TIA/EIA-568-B

More information

1.27mm Pitch Two-Piece Connector

1.27mm Pitch Two-Piece Connector 1.7mm Pitch Two-Piece Connector HIF6 Series Connector in combination with the HIF6 series connection type HIF3B Series (MIL-C-83503) HIF Series (Board direct mount type) HIF5 Series 1 (Card edge type)

More information

1.27mm Pitch Two-Piece Connector

1.27mm Pitch Two-Piece Connector All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

Ultra Small Surface Mount Coaxial Connectors 1.4mm Mated Height

Ultra Small Surface Mount Coaxial Connectors 1.4mm Mated Height NEW Ultra Small Surface Mount Coaxial Connectors 1.4mm Mated Height W.FL Series Further downsizing of FL series in response to the market needs. Occupied Mounting Area.0.0 Features 1. Mounting area of

More information

Ultra Small Surface Mount Coaxial Connectors 1.4mm Mated Height

Ultra Small Surface Mount Coaxial Connectors 1.4mm Mated Height NEW Ultra Small Surface Mount Coaxial Connectors 1.4mm Mated Height W.FL Series Further downsizing of FL series in response to the market needs. Occupied Mounting Area.0.0 Features 1. Mounting area of

More information

Half-pitch and Multi-function Two Piece Connector

Half-pitch and Multi-function Two Piece Connector Half-pitch and Multi-function Two Piece Connector FX2 Series Stacking connection (Stack height: 12~16mm) 12mm~16mm Horizontal Connection Vertical Connection 25mm Features 1. Various connection with various

More information

7.92 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)

7.92 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) NEW 7.9 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) DF Series Complete Locking Function Completely enclosed locking system Protection from shorts circuits

More information

Low-Profile, Ultraminiature Lightweight SMT Coaxial Connectors or 1.2 mm Mated Height

Low-Profile, Ultraminiature Lightweight SMT Coaxial Connectors or 1.2 mm Mated Height NEW Low-Profile, Ultraminiature Lightweight SMT Coaxial Connectors - 0.94 or 1. mm Mated Height X.FL Series Connector mated condition 0.94 1.0MAX X.FL-LP-040 X.FL-LP-03 09 X.FL-LP P -068 1. 1.3MAX 0.89

More information

Ultra-Small Surface Mount Coaxial Connectors mm Mated Height

Ultra-Small Surface Mount Coaxial Connectors mm Mated Height All non- products have been discontinued, or will be discontinued soon. the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative. NEW Ultra-Small

More information

USB Type-C Connector. Overview. Features. CX Series. 1. Easy mating due to the reversible form factor

USB Type-C Connector. Overview. Features. CX Series. 1. Easy mating due to the reversible form factor USB Type-C Connector CX Series Overview Note: Please contact us for TID acquisition status of each product. The CX series connector conforms to the next-generation USB standard USB Type-C. It is expected

More information

PRODUCT SPECIFICATION

PRODUCT SPECIFICATION 1.25 mm pitch SMT Wire to Board Connector 1 of 7 A 1.0 SCOPE This specification covers performance, tests and quality requirements for 1.25 mm pitch Wire to Board DIP & SMT Type of 10114826~10114831 Series.

More information

0.635mm Pitch S.O. DIMM Socket

0.635mm Pitch S.O. DIMM Socket 0.635mm Pitch S.O. DIMM Socket SX1 Series Variation in Mounting Height Low Profile Type (Mounting Height: 4.0mm) Standard Type (Mounting Height: 5.5mm) Features 1. 72pos. Small Outline DIMM Socket SX1

More information

0.3 mm pitch, 0.9 mm height, back flip type dual-sided FPC connector

0.3 mm pitch, 0.9 mm height, back flip type dual-sided FPC connector 0.3 mm pitch, 0.9 mm height, back flip type dual-sided FPC connector FH35C Series 3.2 mm in depth Features 1. 0.3 mm pitch, Dual-sided connector This connector utilizes both a top and bottom contact and

More information

Low-Profile, Ultraminiature Lightweight SMT Coaxial Connectors or 1.2 mm Mated Height

Low-Profile, Ultraminiature Lightweight SMT Coaxial Connectors or 1.2 mm Mated Height NEW Features Low-Profile, Ultraminiature Lightweight SMT Coaxial Connectors - 0.94 or 1. mm Mated Height X.FL Series 1. A Low mated height of 0.94 or 1. mm (maximum of 1.0 or 1.3 mm) When connected this

More information

Product Compliant to DIN41612/IEC603-2 Standard

Product Compliant to DIN41612/IEC603-2 Standard Product ompliant to IN41612/IE603-2 Standard PN Series Pin Header Side Straight through hole type Receptacle Side Straight through hole PN10E- * *P-2.54S PN10E-* *S-2.54S PN10-* *S-2.54S PN10E-* *S-2.54S

More information

DUBOX SHUNTS BOARD/WIRE-TO-BOARD CONNECTORS FEATURES & BENEFITS. Dual-beam contacts for added reliability

DUBOX SHUNTS BOARD/WIRE-TO-BOARD CONNECTORS FEATURES & BENEFITS. Dual-beam contacts for added reliability BOARD/WIRE-TO-BOARD CONNECTORS DUBOX SHUNTS FEATURES & BENEFITS Dual-beam contacts for added reliability Slotted cutout in low profile housing simplifies electrical testing Side-by-side and end-to-end

More information

0.2mm/0.25mm Pitch, 0.9mm Height, Top and Bottom Contact, Back Flip, High FPC Retention Force Connector

0.2mm/0.25mm Pitch, 0.9mm Height, Top and Bottom Contact, Back Flip, High FPC Retention Force Connector NEW 0.mm/0.5mm Pitch, 0.9mm Height, Top and ottom, ack Flip, High FPC Retention Force Connector FH58/FH58M Series Maximizes board space by utilizing its low-profile, and narrow pitch and depth

More information

Mini PCI Express Card Socket

Mini PCI Express Card Socket Mini PCI Express Card Socket Document No: Page: 1 of 4 1. Scope This specification covers the material and performance requirements for the Mini PCI Express Card Socket series. 2. Applicable documents

More information

1.25mm Pitch Miniature Crimping Connector

1.25mm Pitch Miniature Crimping Connector 1.mm Pitch Miniature Crimping Connector DF1 Series Type Mounting Type Mounting Height Straight Type DIP SMT.mm.mm Right Angle Type DIP SMT.mm Features 1. Miniature Size Designed in the low profile at mounting

More information

0.3mm Contact Pitch, 1.25mm above the board, Flexible Printed Circuit Connectors

0.3mm Contact Pitch, 1.25mm above the board, Flexible Printed Circuit Connectors 0.3mm Contact Pitch, 1.mm above the board, Flexible Printed Circuit Connectors FH 23 Series Staggered termination configuration. Only 1. mm above the board. Leadless type Completely enclosed bottom surface

More information

2 2.2mm Pitch, Wire-to-Wire Connectors for Small Spaces

2 2.2mm Pitch, Wire-to-Wire Connectors for Small Spaces 2 2.2mm Pitch, Wire-to-Wire Connectors for Small Spaces DF62 Series / DF62W Series Features 1. The slim, sleek design and smooth contour combine to complete connections in tight spaces. These connectors

More information

Mechanical data Number of Contacts 8 or 16. Card extraction force. Electrical data Insulation resistance Contact resistance max. Card detection switch

Mechanical data Number of Contacts 8 or 16. Card extraction force. Electrical data Insulation resistance Contact resistance max. Card detection switch 1136 ITT - CCM Catalog 11/20/00 12:27 PM Page 8 CCM01 MK I CCM01 MK I connectors have fixed contacts and a blade card detection switch (not sealed). These connectors are intended for applications where

More information

PRODUCT SPECIFICATION. This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors.

PRODUCT SPECIFICATION. This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors. s-12-1177*1.0 SCOPE 1 of 8 D This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors. 2.0 APPLICABLE DOCUMENTS The following documents, of

More information

Vertical type HDMI Receptacle Connector

Vertical type HDMI Receptacle Connector Product Specification 108-60086 Vertical type HDMI Receptacle Connector 1 Scope: 11 Contents This specification covers the requirements for product performance, test methods and quality assurance provisions

More information

13~17 A Compatible, Position Misalignment Absorption Type Power Supply Connector for PCB Connections

13~17 A Compatible, Position Misalignment Absorption Type Power Supply Connector for PCB Connections 13~17 A Compatible, Position Misalignment Absorption Type Power Supply Connector for PCB Connections FX3B Series Example of Connector Mounted Next to Another Connector FX18 Series (without position misalignment

More information

QUICKIE SHROUDED HEADERS LOW PROFILE

QUICKIE SHROUDED HEADERS LOW PROFILE BOARD/WIRE-TO-BOARD CONNECTORS QUICKIE SHROUDED HEADERS LOW PROFILE FEATURES & BENEFITS Recessed pins assure proper alignment and eliminate damage during mating End windows for latching with IDC receptacle

More information

CF CARD CONNECTOR MA TYPE

CF CARD CONNECTOR MA TYPE CF Card 1.27mm (.5") pitch CF CARD CONNECTOR MA TYPE 5-circuit CF card connector Emboss Tape Features Socket Both dual-row straddle type and single-row SMT type sockets are available. Single-row SMT type

More information

0.3mm Contact Pitch, 1.25mm above the board, Flexible Printed Circuit Connectors

0.3mm Contact Pitch, 1.25mm above the board, Flexible Printed Circuit Connectors 0.3mm Contact Pitch, 1.mm above the board, Flexible Printed Circuit Connectors FH 23 Series Staggered termination configuration. Only 1. mm above the board. Leadless type Completely enclosed bottom surface

More information

Automotive Camera Module RF Connector POK15 Series

Automotive Camera Module RF Connector POK15 Series Features 1. Superior locking mechanism Our exclusive locking method keeps the mating part in constant contact with the electric reference plane(top Touch), ensuring high contact stability and reliability.

More information

ITS-Z0344 Half Pitch Interface Connectors

ITS-Z0344 Half Pitch Interface Connectors All non- product have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.

More information

CF CARD CONNECTOR MA Type

CF CARD CONNECTOR MA Type Emboss Tape CF CARD CONNECTOR MA Type 1.27mm pitch/50-circuit CF card connector Socket / Dual-row straddle type, SMT type Card frame / for type I cards Adapter / for type I, II cards Header / for type

More information

XSLS SERIES. Ultra Fine Pitch (0.25mm), Ultra Low Profile (1.44mm) Connector for Micro Coaxial Cable (Stacking Type) KEL CORPORATION

XSLS SERIES. Ultra Fine Pitch (0.25mm), Ultra Low Profile (1.44mm) Connector for Micro Coaxial Cable (Stacking Type) KEL CORPORATION Ultra Fine Pitch (0.25mm), Ultra Low Profile (1.44mm) Connector for Micro Coaxial Cable (Stacking Type) XSLS SERIES KEL CORPORATION KEL CONNECTORS,INC KEL Taiwan Co., Ltd. KEL Shanghai Co.,Ltd. www.kel.jp

More information

PRODUCT SPECIFICATION

PRODUCT SPECIFICATION Dual SIM Card Connector, Retainer Type, 8-Pin, SMT, 3.0mm Profile Page 1 Dual SIM Card Connector, Retainer Type, 8-Pin, SMT, 3.0mm Profile Page 2 1.0 SCOPE. This specification covers performance, tests

More information

PC/104, PC/104 Plus Specification

PC/104, PC/104 Plus Specification PC/104, PC/104 Plus Specification Industry Standard bus connection systems, typically used on embedded PC applications. Designed for oard-to-oard stacking with a common bus. PC/104 Connectors mm pitch

More information

PGA / BGA / PLCC SOCKETS

PGA / BGA / PLCC SOCKETS PGA / BGA / PLCC SOCKETS QUICK SELECTOR CHART PGA / BGA / PLCC PGA BGA PLCC GRID 2.54 mm INTERSTITIAL 1.27 mm 1.27 mm 1 mm SOCKETS Solder tail 156 161 165 SEE PAGE 173 Surface mount 156 161 165 166 169

More information

Construction. Mechanical data Number of Contacts 7. Electrical data Insulation resistance Contact resistance max. Environmental data.

Construction. Mechanical data Number of Contacts 7. Electrical data Insulation resistance Contact resistance max. Environmental data. 1136 ITT - CCM Catalog 11/20/00 12:29 PM Page 59 The is a connector for MultiMediaCards. These cards have been developed as small form factor memory cards with ROM and RAM capabilities. The connector provides

More information

onlinecomponents.com

onlinecomponents.com 0.9 For FPC FPC connectors (0.3mm pitch) Back lock Y3B Series New FEATURES 1. Slim and low profile design (Pitch: 0.3 mm) The use of a back lock mechanism enables a 3.15 mm (with lever) low profile design.

More information

PRODUCT SPECIFICATION

PRODUCT SPECIFICATION SIM Card Connector, Hinged Type, 8 Pin, SMT, 1.50mm Profile. Page 1 SIM Card Connector, Hinged Type, 8 Pin, SMT, 1.50mm Profile. Page 2 1.0 SCOPE. This specification covers performance, tests and quality

More information

0.4mm Contact Pitch, 1.5mm above the board, Board-to-Board / Board-to-FPC Connectors DF18 Series

0.4mm Contact Pitch, 1.5mm above the board, Board-to-Board / Board-to-FPC Connectors DF18 Series 0.4mm Contact Pitch, 1.5mm above the board, BoardtoBoard / BoardtoFPC Connectors F18 Series Low profile Boardtoboard distance of 1.5 mm FPC Stiffener 0.1 1.5 +0.2 Board FPC Stiffener 0.1 1.5 +0.2 Board

More information

Mini PCI Express & msata Connector

Mini PCI Express & msata Connector 09.Mar.2012 Rev. C Mini PCI Express & msata Connector 1 Scope: 1.1 Contents This specification covers the requirements for product performance, test methods and quality assurance provisions of MINI PCI

More information

SSL 1.1 Series. Product Data Sheet REV. 4, 2014 JUN

SSL 1.1 Series. Product Data Sheet REV. 4, 2014 JUN SSL 1.1 Series Product Data Sheet REV. 4, 2014 JUN General Specification Number of Positions Current Rating 2, 4, 6P 3A (Max) Voltage Rating Dielectric Withstand Voltage Durability Color Operating Temperature

More information

Product Specification. Mezza-pede SMT Connector Low Profile 1.0mm Pitch

Product Specification. Mezza-pede SMT Connector Low Profile 1.0mm Pitch Mezza-pede SMT Connector Low Profile 1.0mm Pitch Rev. 1 December 7, 2016 1.0 Scope This product specification applies to 1.0mm pitch Mezza-pede SMT Connectors, designed for the mating and unmating of a

More information

FPC connectors (0.2mm pitch) Back lock

FPC connectors (0.2mm pitch) Back lock 0.9 AYF21 For FPC FPC connectors (0.2mm pitch) Back lock Y2B Series New FEATURES 1. Slim and low profile design (Pitch: 0.2 mm) 0.2 mm pitch back lock design and the slim body with a 3.15 mm depth (with

More information