OSRAM ReliaSys TM D15 LED Retrofit Kit INSTALLATION GUIDE

Size: px
Start display at page:

Download "OSRAM ReliaSys TM D15 LED Retrofit Kit INSTALLATION GUIDE"

Transcription

1 S90655 OSRAM ReliaSys TM D15 LED Retrofit Kit INSTALLATION GUIDE OSRAM ReliaSys TM Outdoor LED Retrofit Kit is an alternative to high-intensity discharge (HID) lamps up to 400W (MH) at pole heights up to 35 ft.* The directional light from high power LEDs and the optimized optical lens allows the delivery of light only where needed, reducing wasted light and minimizing both light trespass and upward light to reduce sky glow. The OSRAM ReliaSys TM Retrofit Kit is an environmentally preferred high efficiency lighting solution containing no mercury or lead and lowers energy consumption by up to 70% compared to HID. The long 50,000 hours life (L70) reduces maintenance and disposal costs. culus1598c Classified for shoebox applications *Results vary by fixture type PLEASE READ ALL INSTRUCTIONS BEFORE ATTEMPTING INSTALLATION TO PREVENT PERSONAL INJURY OR PRODUCT DAMAGE ONLY LICENSED ELECTRICIANS SHOULD PROVIDE ALL INSTALLATION SERVICES. FAILURE TO INSTALL THIS PRODUCT IN ACCORDANCE WITH THE NATIONAL ELECTRIC CODE (NEC), OR THE CANADIAN ELECTRICAL CODE (CSA 22.1), ALL APPLICABLE FEDERAL, STATE AND LOCAL ELECTRIC CODES AS WELL AS THE SPECIFIC UNDERWRITERS LABORATORIES (UL) SAFETY STANDARDS FOR THE INSTALLATION, LOCATION AND APPLICATION MAY CAUSE UNSAFE SITUATIONS LEADING TO SERIOUS PERSONAL INJURY, DEATH, PROPERTY DAMAGE AND/OR PRODUCT MALFUNCTION. TO AVOID ELECTRIC SHOCK OR COMPONENT DAMAGE DISCONNECT POWER BEFORE ATTEMPTING INSTALLATION OR SERVICING. INSTALLATION MUST BE STRUCTURALLY SOUND AS TO PREVENT DAMAGE OR PERSONAL INJURY DUE TO FIXTURE COLLAPSE. USE CAUTION WHEN HANDLING THIS PRODUCT DURING OR AFTER OPERATION AS IT MAY BECOME HOT AND CAUSE BURNS. DISCONNECT PRODUCT AND ALLOW COOLING PRIOR TO SERVICING. ANY ALTERATION OR MODIFICATION OF THIS PRODUCT IS EXPRESSLY FORBIDDEN AS IT MAY CAUSE SERIOUS PERSONAL INJURY, DEATH, PROPERTY DAMAGE AND/OR PRODUCT MALFUNCTION. TO PREVENT PRODUCT MALFUNCTION AND / OR ELECTRICAL SHOCK THIS PRODUCT MUST BE PROPERLY GROUNDED. DO NOT MAKE OR ALTER ANY OPEN HOLES IN AN ENCLOSURE OF WIRING OR ELECTRICAL COMPONENTS DURING KIT INSTALLATION. TO PREVENT WIRING DAMAGE OR ABRASION, DO NOT EXPOSE WIRING TO EDGES OF SHEET METAL OR OTHER SHARP OBJECTS. TO PREVENT RISK OF FIRE OR ELECTRIC SHOCK. INSTALL THIS KIT ONLY IN THE LUMINARIES THAT HAVE THE CONSTRUCTION FEATURES AND DIMENSIONS SHOWN IN THE PHOTOGRAPHS AND/OR DRAWINGS. NOTICE This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Even though this product may continue to light after the lens is cracked or broken, or after the specified lifetime has passed, it must be replaced in order to maintain appropriate light levels. Failure of fixture to provide sufficient weather protection voids warranty. This product should be operated such that the light-engine Tc point is less than 185 F (85 C) and the driver Tc point is less than 167 F (75 C). Installation requirements may vary depending on the luminaire retrofitted. Incorrect electrical polarity may damage the module. If installed in a fixture other than NRTL listed shoebox style fixture contact OSRAM customer service. 1 LED290 06/13

2 1. PRODUCT OVERVIEW 1.1. Products Covered Item Number Ordering Abbreviation Wattage (W) Input Voltage (VAC) Light Distribution LED140RETROFIT730T3MDX-UNV Type-III Medium LED140RETROFIT741T3MDX-UNV Type-III Medium LED140RETROFIT750T3MDX-UNV Type-III Medium LED140RETROFIT730T5MDX-UNV Type-V Medium LED140RETROFIT741T5MDX-UNV Type-V Medium LED140RETROFIT750T5MDX-UNV Type-V Medium LED140RETROFIT730T3MDX -HUV Type-III Medium LED140RETROFIT741T3MDX -HUV Type-III Medium LED140RETROFIT750T3MDX -HUV Type-III Medium LED140RETROFIT730T5MDX -HUV Type-V Medium LED140RETROFIT741T5MDX -HUV Type-V Medium LED140RETROFIT750T5MDX -HUV Type-V Medium 1.2. Next Generation LED Retrofit Kit Product Description The installation kits includes the following parts PART A (1x) LED Light Engine PART B (1x) Power Supply PART C (1x) Surge Protector (78942,78943,78944, 78939, 78940, 78941) OR PART C1 (1x) Surge Protector and PART C2 (1x) rubberized band clamp (78975,78975,78976,78976,78977,78972,78973,78974) PART D (2x) Main Bracket PART E (4x) Extension Arm PART F (28x) #8-18 ¾ long screws (24 are required) PART G (2x) Butt-splice connector PART H (2x) Mounting Flange 2

3 PART-A (1x) LED Light Engine Note: Light Engine Tc Point Light Engine < 85C in fixture. PART-B (1x) Power Supply 3 Note Power Supply Tc Point < 75 deg C is required. Power Supply Tc < 65 deg C is recommended for optimum performance.

4 There are two options for the surge protector (Part C). Option 1 is the rectangular surge protector. Option 2 consists of a cylindrical surge protector and a rubberized band clamp. Only one option is included in the kit. PART-C (OPTION 1) (1x) Surge Protector PART-C (OPTION 2) Surge Protector PART C1 (1X) PART C2 (1X) Note: Surge Protector Tc Point < 85 deg C is required. Note: Surge Protector Tc point < 85C is required. Part C1 Tc point is on the center of the top circular surface. KIT OPTIONS PART D MAIN BRACKET (2X) PART D MAIN BRACKET (2X) PART E EXTENSION ARM (4X) PART F (32X) #8-18 ¾ long screws (28 required) PART-G (2x) : Butt-Splice Connector PART H (2X) MOUNTING FLANGE Notes: Product has been properly packed to protect during transit. Unpack, inspect, and notify the distributor or shipping agent of any damage found. Installation requirements may vary depending on the luminaire retrofitted. 4

5 1.3. Required Tools and Hardware (Not provided) TOOLS Flat and Phillips Head Screwdriver Mechanics slip joint pliers Wire strippers Weatherproof Wire connectors HARDWARE Mounting hardware 1.4. Maintenance and Cleaning Periodic cleaning of fixture will ensure operation at maximum optical efficiency. Even though LED Retrofit Kit may continue to light after the specified lifetime has passed, it must be replaced in order to maintain appropriate light levels 2. INSTALLATION INSTRUCTIONS The D15 retrofit kit must be installed in NRTL Listed Shoebox style fixtures. The fixture must meet all of the following requirements The fixture must be constructed of metal Must incorporate a glass lens Have minimum dimensions of x x WARNING! Risk of electric shock Disconnect power before servicing * Refer to fixture installation manual for fixture mounting procedures ** Please refer to for additional installation instructions 5

6 FIGURE 2- D15 INSTALLED IN A SHOEBOX FIXTURE 2.1. Prepare the fixture for installation Remove the fixture cover, original ballast, ballast mounting hardware and reflector housing Remove Original Lamp System Components Note: Turn power off before attempting installation. If photocell-controlled, connect unit after external control. WARNING! Risk of burn Allow unit to cool fully before servicing Note: Failure to remove original components including ballast will void product warranty. Original Ballast Ballast Hinge Bracket Reflector Housing The light engine brackets need to mount between two flanges. If the fixture does not contain a flange then use the flanges (PART H) that have been provided. 6

7 2.1.2 Add Flanges (Part H) if required. Flange Mounting Screws Flanges (Part H) Flange Mounting Screws Flanges installed in a cast aluminum housing. Two screws per flange. The flanges need to be attached to the fixture with a minimum of two mounting screws per flange. The flanges are designed to be mounted to bosses in the fixture housing. Four #8-18 thread-cutting screws are provided for mounting the flanges. If the bosses are not drilled then drill them with a #28 (0.1405) drill to a depth of 1. The clearance hole in the flange will accept the #8-18 long thread-cutting screws that are provided. The diameter of the clearance hole can be increased as required. Do not use mounting screws smaller than #8. If the bosses cannot accept a screw that is ¾ long screw then the installer needs to provide the appropriate length screw. 7

8 2.2 Add the brackets to the D15 Light-Engine After installation the D15 bracket will rest on the fixture flange. The usable adjustment range of the bracket set is 17 to 24. FIGURE 3 1. Remove the four corner screws from the light-engine bracket (Part F). These should be discarded. 2. Install both of the fixed brackets (Part D) using two screws (Part F) per bracket. The surge suppressor (SPD) and power supply (PS) can be mounted on either the left-side or right-side fixed brackets. Both devices need to be mounted on the same bracket. 3. Install the surge suppressor (SPD) to one of the fixed brackets. The kits with a rectangular SPD (PART C) will use the four screws (Part F). The kits with a cylindrical SPD (PART C1) will use the rubberized band clamp (PART C2) and a single screw (Part F) 4. Install the PS (Part B), using four screws (Part F), to the same fixed bracket that the SPD is mounted to. FIGURE 4 shows the retrofit assembly with the rectangular SPD (PART C) FIGURE 5 shows the retrofit assembly with the cylindrical SPD and rubberized band clamp (PART C1 and PART C2) 5. Loosely install the adjustable brackets (Part E) using eight 8-18 screws (Part F) 8

9 FIGURE 4 For Universal Voltage (Item Numbers: 78942,78943,78944, 78939, 78940, 78941) FIGURE 5 For HUV Voltages (Item Numbers 78972,78973,78974,78975,78976,78977) 9

10 2.3 Mount the Light-Engine Assembly in the Fixture FIGURE 6 Some fixtures may need to be wired prior to mounting the light-engine. For these fixtures perform step 2.4 prior to Place the D15 in the fixture and adjust the brackets such that each bracket rests on the flange of the fixture. The D15 will be attached to the flange using the end holes in the adjustable brackets. 2. Mark the positions of the mounting screws and remove the D Drill four clearance holes for the mounting screws (0.177 #16 drill) 4. Place the D15 in the fixture and adjust the brackets. 5. Fasten the adjustable brackets to the fixture using the four screws (Part F) 6. Tighten the eight screws (Part F) that hold the adjustable brackets to the D Make electrical connection FOR 347/480V UNITS ONLY (NAEDS ) these products have the power supply to light-engine connection made at the factory. Step #1 is not required for these units Make all electrical connections as shown in wiring diagram 1. These connections are performed by (1) Inserting 2 unstripped wires completely into connector (Part G) (2) Checking their position by looking through the translucent connector body, (3) While holding the tool (mechanics slip joint pliers) perpendicular to the wires make the connection by driving the cap down flush with the top edge of the connector body. IMPORTANT! DO NOT STRIP THE WIRES. These butt-splice connectors will not function properly with stripped wires. Verify that correct wire colors are connected before operation The retrofit kit must be installed in a properly grounded fixture. The original fixture will have either a ground wire or a ground terminal. There are two acceptable methods for grounding. Method one is used if the fixture has an existing ground wire connection. Method two is used if the fixture has a ground terminal. 10

11 Black Green White Black White Red Method 1 (Wiring Diagram 1) Verify the incoming ground wire is connected to a ground location on the fixture Connect the D15 ground wire to a different ground location on the fixture using an approved grounding connector. Method 2 (Not shown) Connect an approved grounding wire to a ground location on the fixture Connect the fixture ground wire, incoming ground wire and D15 ground wire using an appropriately rated wire nut If photocell-controlled wire the photocell relay in series with the line connection between the SPD and Power Supply (see wiring diagram 2). The dimming input is compatible with resistance output controls (10KOhm 100KOhm), 1-10V dimming and 10V PWM controls. For 347/480VAC input units the connection from the power supply to the dimming control needs to be made with Class I wiring. Black PWR- White PWR+ Field Installed Connections Factory Pre-wired WIRING DIAGRAM 1 Note: If the dimming function is required then the dimming wires should be connected to the control circuitry using moisture-resistant or weatherproof connectors. Otherwise, cap these wires individually with moisture-resistant or weatherproof connectors. If these wires are connected together the unit will not function. For 347/480VAC input unit the connection from the power supply to the dimming control needs to be made with Class I wiring. The ReliaSys TM D15 LED system offers 1-10V dimming. The output current of the system driver changes linearly with respect to the voltage between the DIM+ and DIM- wires. A 1V level sets the output current to 10% of the rated maximum. A 10V level sets the output current to the maximum level. If each wire is individually capped the lumen output defaults to the maximum level. The ReliaSys TM D15 LED system cannot be dimmed to less than 10%. If a 0% level (OFF) is required it is necessary to remove the input voltage to the system. This can be done mechanically or with a solid-state relay. The dimming circuit of the ReliaSys TM D15 LED system is on the secondary side of the driver which is isolated from the primary. Multiple LED140 dimming leads can be connected in parallel to a single control device. Each ReliaSys TM D15 LED driver will draw less than 1mA on the dimming circuit under all normal operating conditions. Although the maximum current drawn by the dimming input is 1mA, the current is typically 100uA. Be sure of compatibility with any relays used with the system. AC surge protector and power supply are prewired as shown in wiring diagram 1 Photocell connection wiring diagram AC Surge Photo Electric Control Black (LINE) White (NEUTRAL) Green (GND) Brown (L) Blue (N) Green (G) Power supply WIRING DIAGRAM Secure fixture components 2.5 secure fixture components and restore original sealing for water tight seal 11

12 3. Related Documentation Related Documents LED293- OSRAM ReliaSys TM D15 LED Retrofit Kit Product Information Bulletin 4. Troubleshooting Condition Possible Reason(s) Recommended Action Green LED out on AC surge protector Surge protector unable to protect unit 1. If within warranty period, contact Sylvania sales representative for RMA. 2. If out of warranty period, contact Sylvania sales representative for information to replace surge protector. LEDs do no dim or light 1. Power supply polarity is switched 2. Power supply failed 3. LED board is damaged 4. Dimming wires not properly connected 5. Dimming control circuitry is not functioning. 1. Ensure that the red driver input wire is properly connected to the white LED output wire. Ensure that the black LED output wire is properly connected to the black driver input wire. 2. To identify failed power supply, use clamp meter (tongs) to measure output current. Replace if below rated current. Before replacing power supply, verify the green LED on surge protector is lit. 3. If within warranty period, contact OSRAM sales representative for RMA. If not within warranty period, module should be replaced as it is not user serviceable. 4. Ensure that the dimming wires are connected as described. 5. Verify the control circuitry is functioning. Difficulty experienced during mounting --- Contact OSRAM representative for recommended actions. LED290 OSRAM is a registered trademark of OSRAM GmBH. Specifications subject to change without notice For additional 12 questions or service visit or call LIGHTBULB

BoxLED DS Plus (Double Side) BX-DS-PL; BX12BA-W4F Signage Lighting System INSTALLATION GUIDE

BoxLED DS Plus (Double Side) BX-DS-PL; BX12BA-W4F Signage Lighting System INSTALLATION GUIDE www.osram-americas.com/signage BoxLED DS Plus (Double Side) BX-DS-PL; BX12BA-W4F Signage Lighting System INSTALLATION GUIDE WARNING: ONLY QUALIFIED PERSONNEL SHOULD PERFORM INSTALLATION TO AVOID ELECTRICAL

More information

OSRAM ReliaSys D6 Area Light LED Retrofit Kit

OSRAM ReliaSys D6 Area Light LED Retrofit Kit www.sylvania.com/ledr OSRAM ReliaSys D6 Area Light LED Retrofit Kit Key Features & Benefits The D6 Area Light LED Retrofit Kit from OSRAM is an alternative to high-intensity discharge (HID) lamps up to

More information

-Verify that supply wiring voltage matches power supply voltage by comparing it with power supply label.

-Verify that supply wiring voltage matches power supply voltage by comparing it with power supply label. WARNING! RISK OF FIRE OR ELECTRICAL SHOCK Disconnect power before installing or servicing. WARNING: Risk of fire or electrical shock. Luminaire wiring, power supply, or other electrical parts may be damaged

More information

810D Series FAA L-810 Double Obstruction Light Installation Manual

810D Series FAA L-810 Double Obstruction Light Installation Manual 810D Series FAA L-810 Double Obstruction Light Installation Manual 2562426A REV. A 708 Printed in U.S.A. i Contents Safety Message to Installers, Users, and Maintenance Personnel... 1 Overview... 2 Unpacking

More information

Principal LED Street Stik Fluorescent Bulb Replacements

Principal LED Street Stik Fluorescent Bulb Replacements Principal LED Street Stik Fluorescent Bulb Replacements LED Retrofit Guide (PL-RT1-001) WARNING Installation must only be performed by a licensed electrician. To prevent death, injury or damage to property

More information

PEREGRINE SERIES RETROFIT INSTALLATION GUIDE

PEREGRINE SERIES RETROFIT INSTALLATION GUIDE 06.05.17 HanleyLED H100W-PPS524V Spec Sheet SOLUTIONS THAT MAKE SENSE PEREGRINE SERIES RETROFIT INSTALLATION GUIDE Light Up New Markets Your Local Distributor: Grimco US www.grimco.com 800.542.9941 Canada

More information

OT DMX RGB Installation Guide

OT DMX RGB Installation Guide www.sylvania.com OT DMX RGB Installation Guide This installation guide outlines the stepby-step instructions to properly install and configure the OT DMX RGB control interface with a DMX controller. This

More information

LED Shoe Box light FEATURES AND BENEFITS: ORDERING MATRIX: LED SHOE BOX LIGHT:

LED Shoe Box light FEATURES AND BENEFITS: ORDERING MATRIX: LED SHOE BOX LIGHT: ASD slim shoe box lights use up to 8% less energy than metal halide or high pressure sodium lights and put out a much nicer light. Lights up instantly, no warm-up period needed, type III distribution,

More information

Principal LED Qwik Stik Fluorescent Bulb Replacements

Principal LED Qwik Stik Fluorescent Bulb Replacements Principal LED Qwik Stik Fluorescent Bulb Replacements LED Retrofit Guide (PL-RT1-001) WARNING Installation must only be performed by a licensed electrician. To prevent death, injury or damage to property

More information

WARNING. General Information

WARNING. General Information Principal LED Sign Retrofit Installation Manual Kit Model: PL RT1 001 WARNING Retrofit Installation must only be performed by qualified personnel in accordance with the National Electric Code in the USA

More information

LED Gooseneck light FEATURES AND BENEFITS: ORDERING MATRIX: LED GOOSENECK LIGHT:

LED Gooseneck light FEATURES AND BENEFITS: ORDERING MATRIX: LED GOOSENECK LIGHT: ASD LED Gooseneck Barn Lights couple rustic style with modern LED technology. This timeless classic was frequently used on barns, warehouses, and industrial complexes during the early 2th century and is

More information

Avista LED Light Engine

Avista LED Light Engine Patent Protected Features As LEDs change and improve, so does Avista with a second generation of LEDs, optics, and drivers. The Avista is designed to integrate into almost any post top luminaire as a powerful,

More information

- ELV OVERVIEW. InstallationGuide SUPPLIED PARTS RELATED PARTS. Brackets Fixtures. Other. 1 of 9 IG-STR9-ELV

- ELV OVERVIEW. InstallationGuide SUPPLIED PARTS RELATED PARTS. Brackets Fixtures. Other. 1 of 9 IG-STR9-ELV OVERVIEW The STR9 ELV is a long run, low power, linear surface mount LED lighting system designed for exterior architectural lighting applications. This guide contains important information on planning

More information

SAVE THESE INSTRUCTIONS

SAVE THESE INSTRUCTIONS OUTDOOR HARDWIRE INSTALLATION INSTRUCTIONS Please read and save these instructions. Read carefully before using product. Protect yourself and others by observing all safety information, warnings and cautions.

More information

CHANNEL LETTER LIGHTING UNIQUE LIGHTING SOLUTIONS RETROFIT INSTALLATION GUIDE

CHANNEL LETTER LIGHTING UNIQUE LIGHTING SOLUTIONS RETROFIT INSTALLATION GUIDE UNIQUE LIGHTING SOLUTIONS LIGHTING WARNING -Installation must only be performed by a licensed electrician. -To prevent death, injury or damage to property this product must be installed in accordance to

More information

PrevaLED Troffer. Snap board feature allows for customizable lengths. Light is OSRAM.

PrevaLED Troffer. Snap board feature allows for customizable lengths. Light is OSRAM. www.osram.us/ds PrevaLED Troffer Snap board feature allows for customizable lengths The PrevaLED Troffer LED module family offers innovative solutions for a variety of LED troffer luminaires with its customizable

More information

Features. Product Overview. Wattage: Lumen Output: Color Temp: Diameter: Dimming: Application: Installation: Electrical: Construction: Distribution:

Features. Product Overview. Wattage: Lumen Output: Color Temp: Diameter: Dimming: Application: Installation: Electrical: Construction: Distribution: Patent Protected Features As LEDs change and improve, so does Avista with a second generation of LEDs, optics, and drivers. The Avista is designed to integrate into almost any post top luminaire as a powerful,

More information

LED IMPORTANT SAFETY INSTRUCTIONS

LED IMPORTANT SAFETY INSTRUCTIONS LED IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL SAFETY INSTRUCTIONS! SAVE THESE INSTRUCTIONS AND DELIVER TO OWNER AFTER INSTALLATION To reduce the risk of death, personal injury or property damage

More information

General-Purpose Photoelectric Sensor

General-Purpose Photoelectric Sensor General-Purpose Photoelectric Sensor Compact Limit Switch Style with Universal Supply FET output allows for solid state switching of AC or DC Universal AC/DC power supply Choose cable or connector types

More information

Linearray PD Retrofit Kit

Linearray PD Retrofit Kit Linearray Retrofit and Installation Instructions 1. Scope All Installations should be performed by qualified personnel and all electrical work should be performed in accordance to NEC and local code. These

More information

M215-Z Safety Information (M LL-IG-ZC)

M215-Z Safety Information (M LL-IG-ZC) M215-Z SAFETY M215-Z Safety Information (M215-60-2LL-IG-ZC) This document contains important instructions to use during installation of the M215-Z Zep Compatible Microinverters. To reduce the risk of electrical

More information

MODEL SST3-MV INSTALLATION INSTRUCTIONS FOR FEDERAL MODEL SST3-MV SELECTABLE SIRENTONE-MULTI VOLT

MODEL SST3-MV INSTALLATION INSTRUCTIONS FOR FEDERAL MODEL SST3-MV SELECTABLE SIRENTONE-MULTI VOLT MODEL INSTALLATION INSTRUCTIONS FOR FEDERAL MODEL SELECTABLE SIRENTONE-MULTI VOLT INSTALLATION INSTRUCTIONS FOR FEDERAL MODEL SELECTABLE SIRENTONE-MULTI VOLT A. GENERAL. The Federal Model is a solid-state

More information

M215 Safety (M LL-S22-IG / S23-IG / S24-IG)

M215 Safety (M LL-S22-IG / S23-IG / S24-IG) M215 SAFETY M215 Safety (M215-60-2LL-S22-IG / S23-IG / S24-IG) Important Safety Information This document contains important instructions to use during installation of the Enphase M215 Microinverter. To

More information

M250 (M LL) Safety

M250 (M LL) Safety M250 SAFETY M250 (M250-60-2LL) Safety Important Safety Information This document contains important instructions to use during installation of the Enphase M250 Microinverter. To reduce the risk of electrical

More information

elucent WPFC Series LED Wall Pack Product Description WPFC Series Family Model Performance Summary WPFC40 WPFC60 WPFC90

elucent WPFC Series LED Wall Pack Product Description WPFC Series Family Model Performance Summary WPFC40 WPFC60 WPFC90 Family Model WPFC40 WPFC60 WPFC90 WPFC Series elucent WPFC Series LED Wall Pack Product Description elucent WP Series LED Wall pack is designed for applications that require lighting with a long life and

More information

Enphase S-Series Microinverter and Engage Cable Safety

Enphase S-Series Microinverter and Engage Cable Safety SAFETY Enphase S-Series Microinverter and Engage Cable Safety Important Safety Information (S280-60-LL and S230-60-LL) This document contains important instructions to use during installation of the Enphase

More information

LED Shoebox/Area Light

LED Shoebox/Area Light Catalog #: Project : Type : Date: Notes: LED Shoebox/Area Light DESCRIPTION State-of-the-art design luminaire for parking lots & security lighting. Corrosion resistant with Type II, III, IV, & V Optics

More information

BreezeMAX Wi² and BreezeACCESS Wi² Quick Installation Guide

BreezeMAX Wi² and BreezeACCESS Wi² Quick Installation Guide This Quick Installation Guide is intended for experienced installers. For more information refer to the relevant sections in the BreezeMAX Wi² and BreezeACCESS Wi² System Manual. Wi² Package Content Check

More information

FDS / FDS-R / FDS-PS

FDS / FDS-R / FDS-PS FDS / FDS-R / FDS-PS USER MANUAL For use with 120V 60Hz input. Output is 120V 60Hz at 5amps 600W MAX. switched. ETL LISTED Conforms to UL STD 1241 3091594 79-15167-00 REV. A www.fiberstars.com Page 1 of

More information

Instruction Manual. Electrical Management System (EMS) EMS-HW30C & EMS-HW50C

Instruction Manual. Electrical Management System (EMS) EMS-HW30C & EMS-HW50C Instruction Manual Electrical Management System (EMS) EMS-HW30C & EMS-HW50C EMS-HW50C EMS-HW30C! CAUTION These instructions are intended to provide assistance with the installation of this product, and

More information

THE ARIA. LED AREA LIGHT. eran industrial. ARL SERIES

THE ARIA. LED AREA LIGHT. eran industrial. ARL SERIES AREA LIGHT eran industrial. ARL SERIES AREA LIGHTS THE SUPERIOR ARL SERIES ARL 460 120W 100W 65W ARL 480 250W 200W 150W ARL 460 380W 300W WE CONTINUE TO BRING ADVANCED TECHNOLOGY TO THE LIGHTING INDUSTRY.

More information

ew Downlight SM Installation Guide An EssentialWhite Product

ew Downlight SM Installation Guide An EssentialWhite Product Installation Guide ew Downlight SM An EssentialWhite Product ew Downlight SM Powercore is a low-profile, surface-mounted downlight for basic white illumination. The ew Downlight SM Powercore fixture is

More information

ENCELIUM EXTEND Manager Wiring and installation manual Light is OSRAM

ENCELIUM EXTEND Manager Wiring and installation manual Light is OSRAM www.osram.us/extend ENCELIUM EXTEND Manager Wiring and installation manual Light is OSRAM Overview The ENCELIUM EXTEND Manager is a gateway that interfaces to both IT equipment (servers, LAN, etc) and

More information

Infosystem Remote Touchscreen Installation Instructions

Infosystem Remote Touchscreen Installation Instructions Infosystem Remote Touchscreen Installation Instructions DOC. #569102100 A 7/30/04 PRINTED IN U.S.A. Regulatory Compliance Safety This device has been tested and found to be in compliance with the requirements

More information

Instruction Manual HPH-8

Instruction Manual HPH-8 Specifications HPH-8 Trigger cable 120-volt, Nema 1-15 Main Power 50-amps @ 240-volt AC Power receptacles (4) Nema 5-15 or 6-15 Maximum HID wattage 8000 watts (on 240-volt) 4800 watts (on 120-volt) Maximum

More information

M215 (M215-60) Safety

M215 (M215-60) Safety M215 QUICK INSTALL GUIDE M215 (M215-60) Safety Important Safety Information This document contains important instructions to use during installation and maintenance of the Enphase M215 Microinverter. To

More information

ETC Installation Guide

ETC Installation Guide Unison Foundry Overview The Unison Foundry provides fully-rated 20A relays for switched power control with 0 10V dimming for compatible fluorescent ballasts and LED drivers. The provides two outputs of

More information

InView Marquee Message Display

InView Marquee Message Display Installation Instructions InView Marquee Message Display Introduction These instructions show how to change the serial address and how to mount InView series signs with NEMA Types 4, 4X, and 12 enclosures.

More information

Installation Instructions

Installation Instructions 50ES, 50EZ, 50GL, 50GS, 50GX, 50JS, 50JX, 50JZ, 50SD, 50SZ, 50VL, 50VT, 50XP, 50XZ 601A, 602A, 602B, 604A, 604B, 604D, 607C, 701A, 702A, 702B, 704A, 704B, 704D, 707C PA1P, PA2P, PA3P, PH1P, PH2P, PH3P

More information

E1135C PDU and Pod Upgrade Procedure

E1135C PDU and Pod Upgrade Procedure E4030-90010 Rev. B 12/2003 In this Document... Tools Needed, 2 Contents of the Upgrade Kits, 2 Installation Procedures, 4 Verifying the Power Option of the New PDU, 4 Removing the PDU from the Support

More information

LED Shoe Box light ORDERING MATRIX: LED SHOE BOX LIGHT:

LED Shoe Box light ORDERING MATRIX: LED SHOE BOX LIGHT: This slick and modem luminaire ASD Shoebox has been designed to handle Catalog number any environment with a beautiful slim line design. Optional photocell allows Notes for further energy saving. Save

More information

Analog Monitor Installation Manual

Analog Monitor Installation Manual Analog Monitor Installation Manual Part Number: 144-23919 Copyright 2011 Magnetek 1. Preface and Safety Magnetek manufactures products used as components in a wide variety of industrial systems and equipment.

More information

LED SMD FLOODLIGHT with knuckle

LED SMD FLOODLIGHT with knuckle LED SMD Compact Floodlights are a great step forward in the lighting industry. Their energy consumption is much lower and performance is often higher than that of all other widely used types of fixtures.

More information

Electrical Management System (EMS) EMS-HW30C & EMS-HW50C

Electrical Management System (EMS) EMS-HW30C & EMS-HW50C Electrical Management System (EMS) EMS-HW30C & EMS-HW50C Installation & Operating Guide for: Model EMS-HW30C Rated at 120V/30A and Model EMS-HW50C Rated at 240V/50A Surgio Says Lifetime Warranty on all

More information

MBE Mounts and Adapters

MBE Mounts and Adapters MBE Mounts and Adapters MBE Series en Installation Guide MBE Mounts and Adapters Table of Contents en 3 Table of Contents 1 Important safety instructions 4 2 MBE Series Mounts and Adapters 6 2.1 Unpacking

More information

Project: Catalog No.: CALCULATED LIFETIME. Fixture Type: 100,000 HOURS. Notes:

Project: Catalog No.: CALCULATED LIFETIME. Fixture Type: 100,000 HOURS. Notes: AL SERIES AREA LIGHT Finish Color Dark Bronze White AL Series LED Area Light luminaries provide substantial energy savings through efficient delivery of light into all areas of parking lots or other large

More information

Installing a Power over Ethernet injector

Installing a Power over Ethernet injector Installing a Power over Ethernet injector AlphaEclipse StreetSmart and RoadStar signs The instructions in this document explain how to install/replace a Power over Ethernet (PoE) injector in a StreetSmart

More information

Satellite INSTALLATION GUIDE

Satellite INSTALLATION GUIDE N3 Satellite INSTALLATION GUIDE ! WARNING! Shock Hazard. May result in serious injury or death. Turn power OFF at circuit breaker or remove fuse. Damage to this product caused by wiring with power on voids

More information

ORB TM 4-20 ma Input Box Installation & Operation Manual

ORB TM 4-20 ma Input Box Installation & Operation Manual IOM ORB TM 4-20 ma Input Box Installation & Operation Manual ORB TM 4-20 ma Input Box Installation & Operation Manual CONTENTS I. HANDLING & STORAGE... 1 Inspection and Handling Disposal and Recycling

More information

Item # Part # Wattage Lumens Kelvin Voltage Type Distribution Custom Options Available*

Item # Part # Wattage Lumens Kelvin Voltage Type Distribution Custom Options Available* Product Information The LITELUME Area Light Medium Luminaire (LL-ALM) combines style with performance. Featuring a die-cast aluminum housing with outstanding corrosion protection, and secondary UV resistant

More information

Full HD Speed Dome IP Camera

Full HD Speed Dome IP Camera Full HD Speed Dome IP Camera Installation Guide Indoor / Outdoor Ver. 1.6 Preface The information given in this manual was current when published. The company reserves the right to revise and improve its

More information

InnoMedia Business VoIP ATA Models

InnoMedia Business VoIP ATA Models InnoMedia Business VoIP ATA Models MTA8328-4, MTA8328-8, MTA8328-24 Quick Installation Guide Important Safety Instructions Protective Earthing Protective earthing is used as a safeguard. This equipment

More information

Model 2460-KIT. Screw Terminal Connector Kit. Description / September 2014 *P * 1

Model 2460-KIT. Screw Terminal Connector Kit. Description / September 2014 *P * 1 Keithley Instruments 28775 Aurora Road Cleveland, Ohio 44139 1-800-935-5595 http://www.keithley.com Model 2460-KIT Screw Terminal Connector Kit Description The Model 2460-KIT Screw Terminal Connector Kit

More information

DIRECT POWER LIGHTING MANUAL

DIRECT POWER LIGHTING MANUAL SS2 -RGBW RGBW-18L DIRECT POWER LIGHTING MANUAL Coloronix, Inc. 5461 West Jefferson Boulevard Los Angeles, California 90016 (323) 677-4242 http://www.rgbw.com Summary Introduction RGB Color Changing Adjustable

More information

Instruction Manual. M Pump Motor Controller. For file reference, please record the following data:

Instruction Manual. M Pump Motor Controller. For file reference, please record the following data: Instruction Manual M Pump Motor Controller For file reference, please record the following data: Model No: Serial No: Installation Date: Installation Location: When ordering replacement parts for your

More information

INSTALL INSTRUCTIONS RSXMR-9886-P-48

INSTALL INSTRUCTIONS RSXMR-9886-P-48 INSTALL INSTRUCTIONS RSXMR-9886-P-48 Installation Instructions RSXMR-9886-P-48 (CEQ. 20194) INSTALL INSTRUCTIONS RSXMR-9886-P-48 Contents Section Description Page 1 Copyright 2 1.1 Disclaimer 2 1.2 Warnings

More information

rcc.1081 Installation Instructions

rcc.1081 Installation Instructions rcc.1081 Installation Instructions Table of Contents Introduction...1 Specifications...2 Mounting...3 Wiring...5 Wiring Method...7 BACnet Network Wiring...8 Setting BACnet Address...9 Setting the BACnet

More information

Installation Instructions

Installation Instructions CRDMNDMD001A00 CRDMNDMD002A00 Energy Demand Load Controller Rooftop Unit Accessory Installation Instructions NOTE: C13331 Read the entire instruction manual before starting the installation, and follow

More information

IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS AND DELIVER TO OWNER AFTER INSTALLATION IMPORTANT SAFETY INSTRUCTIONS WARNING RISK OF SEVERE INJURY OR DEATH To reduce the risk of death,

More information

CITY OF BOISE SPECIFICATIONS FOR LIGHT EMITTING DIODE (LED) STREET LIGHTING Effective 1 Feb, 2018

CITY OF BOISE SPECIFICATIONS FOR LIGHT EMITTING DIODE (LED) STREET LIGHTING Effective 1 Feb, 2018 CITY OF BOISE SPECIFICATIONS FOR LIGHT EMITTING DIODE (LED) STREET LIGHTING Effective 1 Feb, 2018 1. LIGHT EMITTING DIODE (LED) LUMINAIRES FOR ROADWAY TYPE 3 ILLUMINATION A. Testing and Compliance I Manufacturer

More information

Nano Liner Allegro AC XB RGB / DW INSTALLATION GUIDE V1.2

Nano Liner Allegro AC XB RGB / DW INSTALLATION GUIDE V1.2 Nano Liner Allegro AC XB RGB / DW INSTALLATION GUIDE V1.2 Cover: Nano Liner Allegro AC XB-9 RGB Nano Liner Allegro AC XB-18 RGB Nano Liner Allegro AC XB-27 RGB Nano Liner Allegro AC XB-36 RGB Nano Liner

More information

i-series Videoconference Fixture

i-series Videoconference Fixture TM i-series Videoconference Fixture Operating Instructions 580 Mayer Street, Building #7, Bridgeville, PA 15017 phone 412.206.0106 fax 412.206.0146 www.brightlines.com 2013 Brightline, L.P. Safety To prevent

More information

Overview These instructions are presented as a guideline for installing and setting up the LX Series Breaker Control Panel.

Overview These instructions are presented as a guideline for installing and setting up the LX Series Breaker Control Panel. LX Breaker Control Panels Installation and Setup Procedure Hubbell Building Automation, Inc. 9601 Dessau Road Building One Suite 100 Austin, Texas 78754 512-450-1100 512-450-1215 Fax www.hubbell-automation.com

More information

AE-237. Outdoor Enclosure. Installation Guide. Rev IP Sur veillance. Ordering part no.: G AE-237_V01. Document part no.

AE-237. Outdoor Enclosure. Installation Guide. Rev IP Sur veillance. Ordering part no.: G AE-237_V01. Document part no. AE-237 Outdoor Enclosure Installation Guide Ordering part no.: 900026900G AE-237_V01 Rev. 1.1 Document part no.: 625030701G IP Sur veillance CAUTION: TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT REMOVE

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS TM REPLACEMENT PARTS FOR USE WITH CX SERIES PANELS INSTALLATION INSTRUCTIONS Hubbell Control Solutions 9601 Dessau Road Building One Suite 100 Austin, TX 78754 Toll Free: 888-698-3242 Fax: 512-450-1215

More information

Specification Data Sheet

Specification Data Sheet Specification Indoor Light : T8T Series Standard Standard Specification Data Sheet T8 Series ( Standard ) Product Picture : T8T-4ft Features 3 Years Warranty Specified Beam Angle CE / UL / DLC / RoHS Certificated

More information

Installation and Operations Manual. Electronic copies available at (Rev_ )

Installation and Operations Manual. Electronic copies available at (Rev_ ) Installation and Operations Manual Electronic copies available at www.aquariitech.com/downloads/axceleronmanual Axceleron Installation and Operations Manual AXCELERON FIXTURE INSTALLATION... 1 Introduction...

More information

INSPECTION TOOL. Inspection Video Camera with Color LCD Monitor. EU Environmental Protection. Model: 8802LE,8803LE. Model: 8802LE,8803LE

INSPECTION TOOL. Inspection Video Camera with Color LCD Monitor. EU Environmental Protection. Model: 8802LE,8803LE. Model: 8802LE,8803LE INSPECTION TOOL Inspection Video Camera with Color LCD Monitor Model: 8802LE,8803LE EU Environmental Protection Waste electrical products should not be disposed of with household waste. Please recycle

More information

Dual Relay Luminaire Control Module Wiring and installation manual Light is OSRAM

Dual Relay Luminaire Control Module Wiring and installation manual Light is OSRAM www.osram.us/extend Dual Relay Luminaire Control Module Wiring and installation manual Light is OSRAM Overview The Dual Relay Luminaire Control Module interfaces between the ENCELIUM EXTEND Networked Light

More information

INSTALLATION MANUAL. ST-BTWD650IR2812 B or W Weatherproof Day/Night Infrared Color Camera

INSTALLATION MANUAL. ST-BTWD650IR2812 B or W Weatherproof Day/Night Infrared Color Camera INSTALLATION MANUAL ST-BTWD650IR2812 B or W Weatherproof Day/Night Infrared Color Camera PACKAGE CONTENTS This package contains: One ST-BTWD650IR2812 camera with Black or White housing One extension tube

More information

PowerLogic ION7300 Series

PowerLogic ION7300 Series PowerLogic ION7300 Series Power and Energy Meter Advanced Field Retrofit Instructions August 2006 Danger This symbol indicates the presence of dangerous voltage within and outside the product enclosure

More information

Specifications, Installation, and Operating Instructions

Specifications, Installation, and Operating Instructions Specifications, Installation, and Operating Instructions Model: Power Vantage AC Panel Protector CAUTION: The installation of a surge protection device () must be done by qualified electrical personnel.

More information

Explosion-Protected Arc-Fault Protection ExAFCI Arc-Fault Circuit Interrupter

Explosion-Protected Arc-Fault Protection ExAFCI Arc-Fault Circuit Interrupter Installation, Operation & Maintenance Sheet Explosion-Protected Arc-Fault Protection ExAFCI Arc-Fault Circuit Interrupter > Contents 1 Contents 1 Contents...2 2 General Information...2 2.1 Manufacturer...2

More information

ibright LED Tube Model: HFL C-16 HFL C-16 Performance summary Performance summary in 2 tubes troffer

ibright LED Tube Model: HFL C-16 HFL C-16 Performance summary Performance summary in 2 tubes troffer ibright LED Tube Model: HFL-80004-12060C-16 HFL-80005-12060C-16 Performance summary Input: 16W, 100~277VAC, 0.135A Luminous efficacy: Typ. 100 lm/w Lumens: 1600lm CCT: 4000K&5000K Color Accuracy: CRI 85,

More information

Model: CAM430MV Wired Multi-View Camera with License Plate / Rear Surface Mount Installation Manual Features

Model: CAM430MV Wired Multi-View Camera with License Plate / Rear Surface Mount Installation Manual Features Model: CAM430MV Wired Multi-View Camera with License Plate / Rear Surface Mount Installation Manual Features Fully Adjustable, Multiple Viewing Angle Smart Camera. High Resolution, 1/2 CMOS Color Camera

More information

*Approved by CSA for non-hazardous locations (Group Safety Publication IEC Third Edition).

*Approved by CSA for non-hazardous locations (Group Safety Publication IEC Third Edition). PowerCore Model MPC-20 Installation Manual *Approved by CSA for non-hazardous locations (Group Safety Publication IEC 61010-1 Third Edition). Products covered in this document comply with European Council

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS LIGHTING CONTROL PANELS 16 AND 24 RELAYS INSTALLATION INSTRUCTIONS INSTALLATION OVERVIEW The installation instructions contained in this document are provided as a guide for proper and reliable installation.

More information

Before installing or performing routine maintenance upon this equipment, follow the general precautions listed in this section.

Before installing or performing routine maintenance upon this equipment, follow the general precautions listed in this section. Safety Before installing or performing routine maintenance upon this equipment, follow the general precautions listed in this section. WARNING: RISK OF ELECTRIC SHOCK - May result in serious injury or

More information

Lineal SPECIFICATIONS: LED Luminaire STRUCTURA INC. FIXTURE TYPE: PROJECT NAME:

Lineal SPECIFICATIONS: LED Luminaire STRUCTURA INC. FIXTURE TYPE: PROJECT NAME: LED Luminaire FIXTURE TYPE: PROJECT NAME: Lineal mounted on Structura Tilt pole. SPECIFICATIONS: CONSTRUCTION: Seamless aluminum housing comprised of 6005A- T61 extrusion and 6061-T6 end plates. Gasketed

More information

Instruction / Installation Sheet DataComm Electronics WH Recessed Pro-Power Kit with Duplex Receptacle and Straight Blade Inlet

Instruction / Installation Sheet DataComm Electronics WH Recessed Pro-Power Kit with Duplex Receptacle and Straight Blade Inlet Instruction / Installation Sheet DataComm Electronics 45-0024-WH Recessed Pro-Power Kit with Duplex Receptacle and Straight Blade Inlet DataComm Electronics, Inc. 6349 Peachtree Street Norcross, GA 30071-1725

More information

Now with Picture Memory

Now with Picture Memory Intrasonic Technology, Inc. Color Video Door Phone / Intercom Installer s Manual Model No.V304KIT-R Now with Picture Memory Please read this manual carefully before the products are installed.technical

More information

Wireless Fixture Adapter (WFA100-SN) Installation Instructions

Wireless Fixture Adapter (WFA100-SN) Installation Instructions Installation Instructions The Daintree Wireless Fiture Adapter () forms part of Daintree s Controlscope Manager (CSM) in commercial and industrial buildings. It transmits and receives messages over the

More information

Multi-Mount for Mac Pro " to 5.25" Drive Bay Converter Bracket. Assembly & Installation Manual

Multi-Mount for Mac Pro  to 5.25 Drive Bay Converter Bracket. Assembly & Installation Manual Multi-Mount for Mac Pro 2009-2010 3.5" to 5.25" Drive Bay Converter Bracket Assembly & Installation Manual Introduction 1 INTRODUCTION 1.1 System Requirements 1.1.1 Computer Requirements 1.1.2 Hard Drive

More information

PS/IO Circuit Board Retrofit

PS/IO Circuit Board Retrofit S&C 6800 Series Automatic Switch Controls PS/IO Circuit Board Retrofit Table of Contents Section Page Introduction Qualified Persons.... 2 Read this Instruction Sheet.... 2 Retain this Instruction Sheet....

More information

SynJet PAR25 LED Cooler with Heat Sink

SynJet PAR25 LED Cooler with Heat Sink PRODUCT SynJet PAR25 LED Cooler with Heat Sink Assembly Guide Version 1.0 June 2009 Version History Document Name: SynJet PAR25 LED Cooler with Heat Sink Assembly Guide Document Number: MKTG-DOC-00048.

More information

diode led VALENT X SPECIFICATION SHEET 24VDC OVERVIEW FEATURES & BENEFITS COMPATIBLE CHROMAPATH CHANNELS

diode led VALENT X SPECIFICATION SHEET 24VDC OVERVIEW FEATURES & BENEFITS COMPATIBLE CHROMAPATH CHANNELS VALENT X diode led a division of elemental LED PREMIUM DIFFUSED LED FIXTURE 24VDC CUSTOMIZABLE DIMMABLE DRY LOCATION HIGH CRI SPECIFICATION SHEET 90+ OVERVIEW VALENT X Premium Diffused LED Fixture is designed

More information

Operating instructions. Switching amplifier DN0210 DN / / 2015

Operating instructions. Switching amplifier DN0210 DN / / 2015 Operating instructions Switching amplifier DN0210 DN0220 UK 80011079 / 00 01 / 2015 Contents 1 Preliminary note...4 1.1 Symbols used...4 1.2 Warning signs used...4 2 Safety instructions...5 2.1 General...5

More information

Sapling Converter Box

Sapling Converter Box Installation Manual Sapling Converter Box SCB-100-000-1 Version Number 1.2 Current as of March 15, 2015 The Sapling Company, Inc. (+1) 215.322.6063 P. (+1) 215.322.8498 F. 2-Wire Converter Box (SCB-100-000-1)

More information

RGBW PATHWAY LIGHTING MANUAL

RGBW PATHWAY LIGHTING MANUAL RGBW PATHWAY LIGHTING MANUAL Coloronix, Inc. 5461 West Jefferson Boulevard Los Angeles, California 90016 (323) 677-4242 http://www.rgbw.com Page 1 Coloronix RGBW Pathway Lighting Manual V1.0 Coloronix,

More information

onlinecomponents.com

onlinecomponents.com R General-Purpose Fiber-optic Sensor Compact Limit Switch Style with Universal Supply H FET output allows for solid state switching of AC or DC H Universal AC/DC power supply H Choose cable or connector

More information

PowerLogic High Density Metering System 1-Meter Enclosure

PowerLogic High Density Metering System 1-Meter Enclosure PowerLogic High Density Metering System 1-Meter Enclosure Installation Guide 63230-508-211A1 Safety information PowerLogic High Density Metering System 1-Meter Enclosure Important information Read these

More information

EcoFlex LED Neon Manual

EcoFlex LED Neon Manual Manual Part number: LN-ECO-XXXX-10m from Environmental Lights is one of the most flexible and cost-effective members of our line of LED Neon products. It allows you to achieve the creative potential of

More information

Instruction Manual: IM E

Instruction Manual: IM E Innovative Technology TVSS Products The I.T. Equalizer Installation Instruction Manual: IM01005011E Rev. 2 May 2009 Contents Page 1 Introduction... 1 1.1 Scope... 1 1.2 I.T. Equalizer Catalog Numbering

More information

Installation Instructions

Installation Instructions CRDMNDGW001A00 CRDMNDGW002A00 Energy Demand Gateway Rooftop Unit Accessory Installation Instructions NOTE: C13331 Read the entire instruction manual before starting the installation, and follow instructions

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS Wired Remote Controller 7 Day Programmable Ductless Systems KSACN0401AAA (High Wall Models) KSACN0501AAA (Ducted/Cassette Models) INSTALLATION INSTRUCTIONS NOTE: Read the entire instruction manual before

More information

Family Modification Watts Dimmable CCT ASD-UHB 2 XX D XX LED UFO High Bay 100 = 100 W Dimmable 50 = 5,000 K 150 = 150 W 200 = 200 W

Family Modification Watts Dimmable CCT ASD-UHB 2 XX D XX LED UFO High Bay 100 = 100 W Dimmable 50 = 5,000 K 150 = 150 W 200 = 200 W Our New UFO style round high bay is the latest in LED technology. Smaller, more efficient, and longer lasting, our new IP WET location rated LED UFO high bay fixture is at 1lm/w achieving desired light

More information

ZC-OH5 TAMPER-RESISTANT INDOOR/OUTDOOR HOUSING INSTRUCTION MANUAL FOR USE WITH GANZ ZC-D5000 SERIES MINIDOME CAMERAS

ZC-OH5 TAMPER-RESISTANT INDOOR/OUTDOOR HOUSING INSTRUCTION MANUAL FOR USE WITH GANZ ZC-D5000 SERIES MINIDOME CAMERAS ZC-OH5 TAMPER-RESISTANT INDOOR/OUTDOOR HOUSING INSTRUCTION MANUAL FOR USE WITH GANZ ZC-D5000 SERIES MINIDOME CAMERAS Please carefully read and observe all instructions and warnings contained in this manual

More information

C-POWER AC AUTOMATIC CONTROL

C-POWER AC AUTOMATIC CONTROL Issue 1 Print 1 C-POWER AC AUTOMATIC CONTROL INSTALLATION INSTRUCTIONS & OWNER S MANUAL Model: 93 ACMC100I A Charles Industries, Ltd. All rights reserved. Printed in the United States of America. Issue

More information

Installation Instructions & User Manual POWERWARE TVSS ZONESENTINEL. AC Panel Transient Voltage Surge Suppressors

Installation Instructions & User Manual POWERWARE TVSS ZONESENTINEL. AC Panel Transient Voltage Surge Suppressors Installation Instructions & User Manual POWERWARE TVSS ZONESENTINEL AC Panel Transient Voltage Surge Suppressors INTRODUCTION This document explains how to install the Powerware TVSS ZoneSentinel AC Panel

More information

PV Rapid Shutdown device

PV Rapid Shutdown device PV Rapid Shutdown device Installation and Operation Manual Solis-RSD-1G(1:1) Solis-RSD-1G(2:2) Manufacturer: Ginlong (Ningbo) Technologies Co.,Ltd., Ningbo, Zhejiang, P.R.China US Office: 565 Metro Pl.

More information