4 x 2 x 0.75 Inches Form factor. 180 Watts with Forced Air Cooling. Approved to EN/IEC Efficiencies up to 92% Standby Power < 0.

Transcription

1 The MBC180 Series of ultra low open frame medical power supplies feature a wide universal AC input range of 85 V 264 VAC, offering output power 180 W with 13 CFM of forced air cooling or up to 120 W with natural convection cooling. They are available in a variety of isolated single output voltages. The MBC Series is designed and approved to the latest medical standards (EN/IEC ), providing 2 x MOPP isolation for Class I & Class II applications. These power supplies are ideal for medical, telecom, datacom, industrial equipment and other applications. 4 x 2 x 0.75 Inches Form factor 180 Watts with Forced Air Cooling Approved to EN/IEC Efficiencies up to 92% -40 to 70 C degree operating temperature 12 V / 0.5 A Fan Output, Thermal Shut-Down feature 3.37 million Hours, Telcordia -SR332-issue 3 MTBF Standby Power < 0.5 W Medical (BF) Safety Approvals Diagnostic Dialysis Drug Pump Home Health Care Monitoring Portable Equipment

2 2 MBC180 Series MBC180-1T12L MBC L MBC180-1T15L MBC L MBC180-1T24L MBC L MBC180-1T30L MBC L MBC180-1T48L MBC L MBC180-1T58L MBC L COVER-180-XBC metal cover kit accessory 12 V 9.37 A 10 A 15 A 0.0 A 2% 15 V 7.5 A 8 A 12 A 0.0 A 2% 24 V 4.68 A 5 A 7.5 A 0.0 A 1% 30 V 3.75 A 4 A 6 A 0.0 A 1% 48 V 2.34 A 2.5 A 3.75 A 0.0 A 1% 58 V 1.94 A 2.07 A 3.1 A 0.0 A 1% 1 For Class II Option (without input Earth pin) add suffix: -2 (e.g.: MBC L-2). 2 Ripple is peak to peak with 20 MHz bandwidth and 10 μf (Tantalum capacitor) in parallel with a 0.1 μf capacitor at rated line voltage and load ranges. Specifications are for nominal input voltage, 25 C unless otherwise stated. Input Voltage Input Frequency Input Current No Load Power Inrush Current Leakage Current Power Factor Switching Frequency Universal (Derate from 100% at 100 VAC to 77% at 80 VAC) 115 VAC: 230 VAC: Typical for MBC180-1XXX Typical for MBC180-1XXX-PGPF 115 VAC: 230 VAC: 264 VAC: Typical (N.A. For Class II Option- without input Earth pin) Touch current 115 VAC: 230 VAC: PFC PWM VAC / 390 VDC Hz 2.2 A max. 1.1 A max. < 0.5 W < 0.85 W 25 A 45 A 75 A 300 ua < 100 ua > to 130 khz 50 to 80 khz tech.support@psbel.com

3 MBC180 Series 3 Output Power 3 Efficiency 230 VAC full load) Hold-up Time With 13 CFM forced air cooling With natural convection cooling at 100 to 264 VAC 48 V, 58 V: 24 V, 30 V: 12 V, 15 V: At 180 W: At 120 W: 180 W up to 120 W 92% 90% 88% 10 ms 16 ms Line Regulation +/-0.5% Load Regulation +/-1% Transient Response 25% step load change, at 0.1 A/uS slew rate, 50% duty cycle, 50 Hz = 4% Voltage Adjustment +/-3% Rise Time Typical 55 ms Set Point Tolerance 4 +/-1% Over Current Protection > 110% recovery time < 5 ms Over Voltage Protection 110 to 140% Short Circuit Protection Hiccup mode 3 Combined output power of main output, fan supply shall not exceed max. Power rating. 4 Fan supply output voltage tolerance including set point accuracy, line and load regulation is +/-10% and Ripple and noise is less than 10%. Operating Temperature Storage Temperature Startup guaranteed with spec. deviation -40 to +70 C -40 to 0 C -40 to +85 C Relative Humidity Non-condensing 5% to 95% Altitude Operating: Non-operating: 16,000 ft 40,000 ft. MTBF Telcordia -SR332-issue million hours Conducted Emissions EN55022-B, CISPR22-B, FCC PART15 B Static Discharge EN : Level-3 RF Field Susceptibility EN : Level-3 Fast Transients/Bursts EN : Level-3 Radiated Emissions Radiated: Radiated with external core: (King core K5B RC 25x12x15-M in input cable (5 turns)) Level A Level B Surge Susceptibility EN : Level-3 Harmonic Current EN : Class D AC Flicker EN : Pass Asia-Pacific Europe, Middle East North America Bel Power Solutions & Protection BCD.00880_AA

4 4 MBC180 Series Isolation Voltage Safety Standard(s) Agency Approvals CE mark Input to Output: (Medical applications) Input to GND: (Not Applicable For Class II Option) Output to GND: for type BF (for type B (N/A for Class II Option) Approved to the latest edition of the following standards: CSA/UL , EN and IEC Nemko, UL, C-UL Complies with LVD Directive 4000 VAC 1500 VAC 1500 VAC 500 VAC AC Input Connector DC Output Connector Aux (Fan) Output Signal Output 5 J1 J2 J3 J4 Pin 1 Pin 2 Pin 3 Pin 1, 2, 3 Pin Pin 1 Pin 2 Pin 1 Pin 2 Pin 3 AC Line Not Fitted AC Neutral V1 +VE V1 -VE FAN +VE FAN -VE Vs PGPF GDN 5 For PGPF Signal Output Connector option please contact factory. Molex: Mating: ; Pins: Option 1 (): Molex: Series or equivalent Option 2 (): Molex: Mating: ; Pins: AMP: Mating: AMP : Mating: Weight Dimensions Cooling approx. 200 g x 50.8 x mm (4 x 2 x 0.75 inches) 180 W with 13 CFM forced air cooling (refer to Mechanical Drawing) Up to 120 W with natural convection cooling (refer to Derating Curve) tech.support@psbel.com

5 MBC180 Series 5 Mechanical Drawing Option 1 without PGPF Mechanical Drawing Option 2 without PGPF NOTES: In case the PCB is mounted in a metal enclosure, using metal hardware ensure the following: 1 Stand off, used to mount PCB has OD of 5.4 mm max. 2 Screws, used to fix PCB on stand off, have head dia of 6.0 mm max. 3 Washer, if used, to have dia of 6.5 mm max. Asia-Pacific Europe, Middle East North America Bel Power Solutions & Protection BCD.00880_AA

6 6 MBC180 Series Mechanical Drawing Option 1 with PGPF Mechanical Drawing Option 2 with PGPF NOTES: In case the PCB is mounted in a metal enclosure, using metal hardware ensure the following: 1 Stand off, used to mount PCB has OD of 5.4 mm max. 2 Screws, used to fix PCB on stand off, have head dia of 6.0 mm max. 3 Washer, if used, to have dia of 6.5 mm max. tech.support@psbel.com

7 MBC180 Series 7 NUCLEAR AND MEDICAL APPLICATIONS - Products are not designed or intended for use as critical components in life support systems, equipment used in hazardous environments, or nuclear control systems. TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending on the date manufactured. Specifications are subject to change without notice. Asia-Pacific Europe, Middle East North America Bel Power Solutions & Protection BCD.00880_AA